DSPIC33EV128GM004T-I/PT - 16-Bit 70 MIPS 128KB DSC | Microchip
MPN: DSPIC33EV128GM004T-I/PT ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33EV128GM004T-I/PT Overview
A digital signal controller combines the computational strengths of a microcontroller (MCU) with the DSP-engine capabilities of a digital signal processor. In the product hierarchy, the dsPIC33EV family sits within Microchip's 16-bit DSC portfolio, above basic PIC MCUs and below 32-bit MCUs, making it a power-management-friendly single-chip solution for mixed control-plus-signal-processing workloads such as motor control and power conversion.
Key features include a 5V-tolerant operating supply that simplifies designs in harsh electrical environments, 128KB of ECC-protected Flash for functional-safety (FuSa) oriented designs, an on-chip DSP engine with multiply-accumulate and barrel shifter, and integrated analog with 3 operational amplifiers and the CTMU charge-time-measurement unit. Peripherals target embedded control directly: 6 motor-control PWM channels, SENT peripheral, and multiple serial interfaces.
Technical depth: the 70 MIPS core is fed from zero-wait-state ECC Flash, and 4 DMA channels offload data movement between peripherals and RAM without CPU intervention, keeping interrupt latency predictable. According to the AiPCBA datasheet summary, the part integrates 60 MHz-class clocking with 6 MC PWM and 3 op amps, letting a single chip close current loops and drive power stages that previously needed external analog circuitry.
Typical applications include Brushless DC and PMSM motor drives in appliances, automotive body and powertrain subsystems (SENT, LIN-capable), and industrial power supplies, inverters, and battery chargers where 5V noise immunity matters.
Design consideration: the 44-TQFP 10x10 mm package needs a solid ground plane and 0.1 uF decoupling on each supply pin pair; at full 70 MIPS, configure the oscillator (FRC with PLL or external crystal) carefully, since maximum peripheral performance depends on the configured clock tree.
This page synthesizes verified distributor data, drop-in family alternatives, pricing tiers, and practical design notes not found together in the manufacturer datasheet.
Drop-in alternatives for DSPIC33EV128GM004T-I/PT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with DSPIC33EV128GM004T-I/PT (same form factor and footprint) — differing in Core Architecture, Operating Temperature, Packaging, Package, Supply Voltage Range.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
DSPIC33EV128GM004T-E/PT
✅ Drop-In📋 Reference alternative (not in catalog)
DSPIC33EV256GM004T-I/PT
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$3.42 / Unit
View Datasheet →DSPIC33EV64GM004T-I/PT
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$2.8 / Unit
View Datasheet →DSPIC33EP128GM304T-I/PT
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$3.95 / Unit
View Datasheet →DSPIC33EP64GM304T-I/PT
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
DSPIC33EV128GM004T-I/PT Maximum Ratings & Electrical Characteristics
| Core Architecture | 16-bit dsPIC33EV DSC |
| Maximum CPU Speed | 70 MIPS |
| Program Memory Size | 128 KB (43K x 24) Flash with ECC |
| RAM Size | 8 KB |
| Supply Voltage | 5 V |
| Number of Timers | 7 |
| DMA Channels | 4 |
| Motor Control PWM Channels | 6 |
| On-chip Op Amps | 3 |
| CTMU (Charge Time Measurement Unit) | Yes |
| SENT Peripheral | Yes |
| Operating Temperature Range | -40C to +85C (I grade) |
| Package | 44-TQFP (10x10 mm) |
| Mounting Type | Surface Mount |
| Functional Safety (FuSa) Support | Yes |
| ECC Flash Protection | Yes |
DSPIC33EV128GM004T-I/PT 44-tqfp (10x10 mm) Pin Configuration Guide
Pin configuration for DSPIC33EV128GM004T-I/PT (44-tqfp (10x10 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for DSPIC33EV128GM004T-I/PT.
Refer to the datasheet for full pin configuration.
Typical Applications
DSPIC33EV128GM004T-I/PT is suitable for 6 applications: BLDC/PMSM Motor Control, Automotive Body and Sensor Subsystems, Industrial Power Supplies and Inverters, Home Appliance Control, Capacitive Sensing and Touch Interfaces, Industrial Sensing and Data Acquisition Nodes.
BLDC/PMSM Motor Control
The DSPIC33EV128GM004T-I/PT fits motor control because its 70 MIPS 16-bit DSP core executes field-oriented control (FOC) loops fast enough for 10-20 kHz PWM frequencies, and its 6 motor-control PWM channels directly drive three-phase inverters with complementary outputs and dead-time insertion. The 3 integrated op amps condition shunt-resistor current feedback on-chip, removing external amplifier ICs and cutting BOM cost in appliance drives such as washing machines, fans, and compressors. In a typical topology, the DSC closes the current loop every PWM cycle and the speed loop at 1 kHz, using the 4 DMA channels to move ADC results to RAM without CPU overhead. The 5V supply improves noise immunity against inverter switching transients compared to 3.3V controllers.
Recommended
Automotive Body and Sensor Subsystems
The DSPIC33EV128GM004T-I/PT suits automotive subsystems because it combines a SENT peripheral (SAE J2716 sensor interface used widely in automotive position/pressure sensors) with ECC-protected Flash and functional-safety (FuSa) support, all on a 5V core tolerant of automotive load-dump environments. Microchip explicitly positions the dsPIC33EV family for automotive applications. Typical use cases include throttle-position modules, HVAC actuators, and pump controllers, where the DSC reads SENT sensors, drives motors via the 6-channel MC PWM, and communicates over LIN/UART. For zones exceeding +85C ambient, the pin-compatible DSPIC33EV128GM004T-E/PT variant extends rating to +125C without PCB redesign, since both share the same 44-TQFP 10x10 mm footprint.
Recommended
Industrial Power Supplies and Inverters
For industrial power conversion, the DSPIC33EV128GM004T-I/PT provides the 70 MIPS throughput and DSP multiply-accumulate engine needed to run digital control loops for LLC converters, solar micro-inverters, and battery chargers. The 6 MC PWM channels support phase-shifted and complementary topologies with hardware dead time, while the CTMU enables precise time-interval measurement for resonant-tank protection. Operating at 5V, the controller withstands noisy 24V industrial backplanes better than 3.3V parts, and the 128KB ECC Flash retains firmware integrity under EMI stress - a requirement for continuously energized industrial equipment. The 4 DMA channels stream ADC samples from current and voltage sense points into RAM, keeping loop-jitter low and control bandwidth predictable across load transients.
Recommended
Home Appliance Control
Microchip targets the dsPIC33EV family directly at appliances operating in harsh electrical environments, and the DSPIC33EV128GM004T-I/PT embodies this: its 5V core, 128KB ECC Flash, and wide peripheral mix cover a complete dishwasher, air-conditioner, or refrigerator mainboard in one chip. The 3 op amps amplify motor phase-current shunt signals, the 6-channel MC PWM drives compressor and fan BLDC motors, and remaining UART/SPI/I2C ports connect to user interfaces, humidity and temperature sensors, and EEPROM. The 44-TQFP 10x10 mm package offers 35 I/O for relays, valves, and display drivers. ECC Flash and FuSa support help appliance makers meet emerging household safety standards for electronically controlled safety functions without adding a supervisory MCU.
Recommended
Capacitive Sensing and Touch Interfaces
The DSPIC33EV128GM004T-I/PT includes a CTMU (Charge Time Measurement Unit), which measures tiny charge intervals to implement capacitive touch buttons, slide controls, and proximity detection directly on general-purpose I/O - no dedicated touch controller required. This suits appliance panels, industrial HMI faceplates, and automotive interior controls. The CTMU also supports ultra-low-current measurement and time-of-flight measurement for sensor diagnostics. Because scanning runs on the 70 MIPS core with DMA-assisted ADC reads, touch scanning can coexist with a 16 kHz motor-control loop on the same chip, a common requirement for fan and pump products with touch user interfaces. The on-chip 3 op amps further condition analog sensor outputs such as thermistors, consolidating analog front-end functions in one 44-TQFP package.
Recommended
Industrial Sensing and Data Acquisition Nodes
As an industrial sensing node controller, the DSPIC33EV128GM004T-I/PT couples its DSP engine and 128KB ECC Flash with multiple serial interfaces (UART, SPI, I2C) to acquire, filter, and forward sensor data on factory equipment. The DSP MAC instructions execute FIR/IIR filtering of vibration or current signatures for predictive-maintenance edge processing, while ECC Flash guarantees code integrity in high-EMI cabinet environments. The 3 op amps amplify low-level signals from strain gauges and current shunts before the ADC samples them; 4 DMA channels move results to the 8KB RAM efficiently. At 5V, signal levels are inherently more noise-robust across long cabinet wiring than 3.3V systems. Nodes communicate upstream over RS-485 or CAN-adapted UART links.
Recommended
Recommended Products Summary
Engineering reference data for DSPIC33EV128GM004T-I/PT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | DSPIC33EV128GM004T-E/PT | DSPIC33EV256GM004T-I/PT | DSPIC33EV64GM004T-I/PT | DSPIC33EP128GM304T-I/PT | DSPIC33EP64GM304T-I/PT |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 128 KB ECC Flash (43K x 24) | 128 KB ECC Flash | 256 KB ECC Flash | 64 KB ECC Flash | 128 KB (no ECC) | 64 KB (no ECC) |
| Core Performance | 16-bit, 70 MIPS, 5V | 16-bit, 70 MIPS, 5V | 16-bit, 70 MIPS, 5V | 16-bit, 70 MIPS, 5V | 16-bit, 33EP generation, 5V | 16-bit, 33EP generation, 5V |
| Operating Temperature | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| Functional Safety / ECC Flash | Yes (FuSa + ECC) | Yes (FuSa + ECC) | Yes (FuSa + ECC) | Yes (FuSa + ECC) | No | No |
Key Differentiators
- ECC Flash plus functional-safety (FuSa) support (vs DSPIC33EP128GM304T-I/PT)
- Extended-temperature drop-in variant available (vs DSPIC33EV128GM004T-E/PT)
- Larger code headroom within same footprint (vs DSPIC33EV64GM004T-I/PT)
- Trade-off: newer generation costs more than 33EP (vs DSPIC33EP64GM304T-I/PT)
Design Notes
For the 44-TQFP (10x10 mm) package, place a 0.1 uF ceramic decoupling capacitor at every VDD/VSS pin pair, within 3 mm of the pins, plus a 4.7-10 uF bulk capacitor near the supply entry. Provide an unbroken ground plane on layer 2 beneath the DSC; do not route motor-control PWM or SENT signals across plane splits. The exposed leads of the TQFP do not include a thermal pad, so heat exits through the leads - allow generous copper on all four sides of the footprint for hand inspection and rework.
Do not confuse the /PT (44-TQFP 10x10) and /P8 (48-TQFP 7x7) package suffixes when ordering - they are not footprint-compatible and the /P8 also maps peripherals to different pin positions. Also verify the temperature suffix: the -I grade stops at +85C; for under-hood or sealed-enclosure heat above that, order the -E/PT (-40C to +125C) variant instead. During layout, reserve the MCLR/PGD/PGC programming pads as a 5-pin ICSP header; retrofitting programming access after production is costly.
The 5V rail feeding the DSPIC33EV128GM004T-I/PT also biases the integrated op amps and ADC reference domain; noise on this rail appears directly in current-sense measurements. Estimated: at 70 MIPS the core current is in the tens of milliamps class (per datasheet electrical characteristics), so a small LDO such as the MCP16301 stepping down a 24V industrial bus is sufficient, but add RC filtering or a ferrite bead between the digital 5V rail and any precision analog reference feed to keep ADC effective resolution at spec.
Motor-control PWM outputs switching several amps into a three-phase inverter inject dv/dt noise into neighboring traces. Route the 6 MC PWM outputs away from the CTMU/touch lines and analog sensor inputs; use series 33-100 ohm resistors on long PWM runs to slow edge rates where EMI margins are tight. Keep the SENT input line short and twisted/ground-guarded in automotive harnesses, and enable the peripheral's built-in nibble filtering rather than relying on software-only debounce.
Compliance Information
RoHS/REACH/lead-free declarations were not present in the verified web data; obtain the official Microchip material declaration from the product page or distributor compliance portal. Automotive suitability is a family positioning statement; AEC-Q100 qualification status of this exact ordering code should be confirmed with Microchip.