MKV30F64VLF10 - 100MHz Cortex-M4F Motor Control MCU | NXP
MPN: MKV30F64VLF10 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $6.5 | $6.50 |
| 10 | $5.78 | $57.80 |
| 100 | $4.96 | $496.00 |
| 500 | $4.35 | $2,175.00 |
| 1,000 | $3.85 | $3,850.00 |
| 3,000 | $3.42 | $10,260.00 |
MKV30F64VLF10 Overview
A microcontroller (MCU) is a system-on-chip containing a processor core (here Cortex-M4F with FPU), program memory (Flash), working memory (SRAM), and a rich peripheral set. In the broader chip taxonomy, an MCU sits at the integration edge of microcontroller -> embedded processor -> semiconductor. Kinetis KV3x MCUs target motor-control and digital-power conversion, where deterministic ADC-to-PWM timing, low latency interrupt response, and high-resolution mixed-signal performance are mandatory.
Key features of the MKV30F64VLF10 include an ARM Cortex-M4F core with DSP and FPU, 64KB program Flash, 16KB SRAM, dual 16-bit SAR ADCs with up to 1.2 MSPS throughput, a high-resolution PWM (FlexTimer/PWM) module for variable-frequency drives, and a 6-channel PDB (Programmable Delay Block) for synchronized ADC sampling. Communications peripherals include UART, SPI, and I2C, while an integrated 5V-tolerant GPIO bank simplifies interface to digital logic and motor-driver ICs.
The KV3x architecture pairs an FPU-equipped Cortex-M4 with tightly-coupled analog, giving DSP-class signal processing at MCU integration levels. The 64KB Flash/16KB SRAM memory profile suits typical sensorless FOC and trapezoidal commutation firmware without requiring external memory. Its industrial temperature grade (-40C to +105C) qualifies the device for harsh-environment motor drives.
Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control in HVAC compressors, refrigerator compressors, industrial pumps, e-bike traction inverters, washing-machine direct-drive motors, and small industrial servos. It also fits switched-mode power supplies and digital power-factor correction.
When designing with this MCU, allocate ADC sample timing and PWM reload points so the modulator ISR fits within one PWM period - typically well under 5 us at 100 MHz. Use a low-ESR decoupling network on VDDA and add an external reference if precise current sensing is required.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Drop-in alternatives for MKV30F64VLF10 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MKV30F64VLF10 (same form factor and footprint) — differing in Package, ADC, MSL Level, Core, Core Architecture.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MKV30F128VLF10
✅ Drop-In📋 Reference alternative (not in catalog)
MKV30F64VLF10R
✅ Drop-In📋 Reference alternative (not in catalog)
MKV42F256VLH16P
✅ Drop-In📋 Reference alternative (not in catalog)
MKV30F64VLF10 Maximum Ratings & Electrical Characteristics
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Frequency | 100 MHz |
| Program Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Package | 48-LQFP (7x7 mm) |
| ADC | Dual 16-bit SAR, up to 1.2 MSPS in 12-bit mode |
| PWM Module | FlexTimer/PWM with complementary outputs and dead-time insertion |
| PDB | 6-channel Programmable Delay Block for ADC/PWM synchronization |
| Communications | UART, SPI, I2C |
| GPIO | Multiple 5V-tolerant I/O |
| Operating Temperature Range | -40C to +105C (industrial) |
| Mounting Type | Surface Mount |
| MSL Level | 3 |
| Peak Reflow Temperature | 260 C (40 s max) |
| RoHS Status | Compliant |
MKV30F64VLF10 Pin Configuration
| Pin 1 | PTE0 — GPIO / UART1_TX / FlexPWM0_A (per datasheet) |
| Pin 2 | PTE1 — GPIO / UART1_RX / FlexPWM0_B |
| Pin 3 | PTE2 — GPIO / SPI0_SCK / FlexPWM0_X |
| Pin 4 | PTE3 — GPIO / SPI0_SOUT / FlexPWM1_A |
| Pin 5 | PTE4 — GPIO / SPI0_SIN / FlexPWM1_B |
| Pin 6 | VREFH — ADC reference voltage high |
| Pin 7 | VREFL — ADC reference voltage low / VSSA |
| Pin 8 | VDDA — Analog supply |
| Pin 9 | VSSA — Analog ground |
| Pin 10 | ADC0_DP0 — ADC0 differential pair 0 positive |
| Pin 11 | ADC0_DM0 — ADC0 differential pair 0 negative |
| Pin 12 | ADC1_DP0 — ADC1 differential pair 0 positive |
| Pin 13 | ADC1_DM0 — ADC1 differential pair 0 negative |
| Pin 14 | PTA0 — GPIO / JTAG_TCLK |
| Pin 15 | PTA1 — GPIO / JTAG_TDI |
| Pin 16 | PTA2 — GPIO / JTAG_TDO |
| Pin 17 | PTA3 — GPIO / JTAG_TMS |
| Pin 18 | PTA4 — GPIO / NMI_b |
| Pin 19 | PTA5 — GPIO / RESET_b |
| Pin 20 | PTB0 — GPIO / I2C0_SCL |
| Pin 21 | PTB1 — GPIO / I2C0_SDA |
| Pin 22 | PTB2 — GPIO / UART0_RX |
| Pin 23 | PTB3 — GPIO / UART0_TX |
| Pin 24 | PTC0 — GPIO / FlexPWM2_A / ADC trigger |
| Pin 25 | PTC1 — GPIO / FlexPWM2_B |
| Pin 26 | PTC2 — GPIO / FlexPWM2_X |
| Pin 27 | PTC3 — GPIO / FlexPWM3_A |
| Pin 28 | PTC4 — GPIO / FlexPWM3_B |
| Pin 29 | PTC5 — GPIO / FlexPWM3_X |
| Pin 30 | PTC6 — GPIO / FlexPWM fault input |
| Pin 31 | PTC7 — GPIO / FlexPWM fault input |
| Pin 32 | PTD0 — GPIO / FlexPWM0_A / PDB trigger |
| Pin 33 | PTD1 — GPIO / FlexPWM0_B |
| Pin 34 | PTD2 — GPIO / FlexPWM0_X |
| Pin 35 | PTD3 — GPIO / FlexPWM1_A |
| Pin 36 | PTD4 — GPIO / FlexPWM1_B |
| Pin 37 | PTD5 — GPIO / FlexPWM1_X |
| Pin 38 | PTD6 — GPIO / LLWU pin |
| Pin 39 | PTD7 — GPIO |
| Pin 40 | PTE5 — GPIO / FlexPWM module fault |
| Pin 41 | PTE6 — GPIO |
| Pin 42 | VSS — Digital ground |
| Pin 43 | VDD — Digital supply |
| Pin 44 | VSS — Digital ground |
| Pin 45 | VDD — Digital supply |
| Pin 46 | VSS — Digital ground |
| Pin 47 | VDD — Digital supply |
| Pin 48 | PTE7 — GPIO |
Typical Applications
MKV30F64VLF10 is suitable for 7 applications: BLDC / PMSM Motor Control (FOC), HVAC Compressor and Refrigeration Drives, Industrial Pumps and Fans, Washing-Machine Direct-Drive Motors, E-Bike / E-Scooter Traction Inverters, Digital Power Conversion (PFC, LLC, Half-Bridge SMPS), Small Servo Drives and Robotics.
BLDC / PMSM Motor Control (FOC)
The MKV30F64VLF10 is engineered specifically for field-oriented control of brushless DC and permanent-magnet synchronous motors. Its 100 MHz Cortex-M4F core with FPU and DSP executes Park/Clarke transforms, SVPWM modulation, and PI control loops within a single PWM period - critical for sub-5 us current-loop updates at 20 kHz switching. The dual 16-bit ADCs sampling at up to 1.2 MSPS, hardware-triggered through the Programmable Delay Block, capture phase currents simultaneously inside the PWM duty window, eliminating the sequencing skew that produces torque ripple. The FlexTimer/PWM module provides complementary outputs with dead-time insertion, removing the need for an external gate-driver sequencer. With 64KB Flash and 16KB SRAM, it comfortably holds sensorless-FOC code plus speed/torque loop tables. Industrial -40C to +105C rating suits under-hood and motor-integrated designs.
Recommended
HVAC Compressor and Refrigeration Drives
Variable-speed compressors in HVAC and refrigeration need sinusoidal torque and minimal acoustic noise, both delivered by field-oriented control. The MKV30F64VLF10's Cortex-M4F FPU runs the math loop at full precision while the 64KB Flash holds sensorless-startup routines, demagnetization tests, and fault-recovery firmware for stall, over-current, and under-voltage conditions. The 6-channel PDB synchronizes ADC sampling with PWM edges so current-sensor readings are taken when switching transients are quiet, improving IPM protection margin. Operating from -40C to +105C and housed in the 48-LQFP for through-hole-style reflow, it mounts comfortably in the compressor control box or outdoor unit inverter stage. Its 5V-tolerant GPIO drives legacy driver ICs directly without level shifters, simplifying BOM.
Recommended
Industrial Pumps and Fans
Variable-frequency drives for industrial pumps, fans, and blowers need precise speed regulation under rapidly changing load. The MKV30F64VLF10's on-chip PWM module supports multi-channel complementary outputs with hardware dead-time, driving three-phase IGBT or MOSFET bridges up to several kW. Fast ADC sampling combined with hardware PDB triggers makes the current loop tight; an additional FlexTimer provides digital tachometer input for encoder-based closed-loop speed control when required. The Cortex-M4F with FPU delivers floating-point motor-model computation - slip compensation, V/Hz profiles, and adaptive PID - within a real-time envelope. 16KB SRAM is sufficient for sensor-fusion and run-time telemetry buffers, while 64KB Flash covers application plus bootloader. The 48-LQFP package and industrial temperature grade fit drive-card assemblies operating inside pump cabinets.
Recommended
Washing-Machine Direct-Drive Motors
Direct-drive washing-machine motors demand high torque at low speed, smooth startup, and full drum reversibility - all handled by field-oriented control on the MKV30F64VLF10. The Cortex-M4F FPU runs the FOC inner loop fast enough to support quasi-sensorless startup algorithms (high-frequency injection) without external RAM. The dual 16-bit ADCs in simultaneous mode sample phase currents inside the zero-vector window of PWM, reducing switching noise and unlocking accurate torque estimation at low speed where back-EMF is weak. The KV3x family's 5V-tolerant GPIOs interface directly to optical-encoder inputs and triac-based drum-direction relays. Industrial temperature rating and LQFP robustness suit the hot, vibration-prone environment inside a washer cabinet. The Kinetis KV3x SDK plus Motor Control Tuner from NXP accelerates firmware bring-up.
Recommended
E-Bike / E-Scooter Traction Inverters
Compact traction inverters for e-bikes and e-scooters deliver peak torque during start-up and hill-climb, then settle into efficient cruising - all needing responsive current control. The MKV30F64VLF10's Cortex-M4F running at 100 MHz executes the FOC commutator plus battery-aware torque mapping in real time. The integrated FlexTimer/PDB chain synchronizes phase-current sampling with PWM centre alignment, capturing data when the bus is quiet. Five-volt-tolerant GPIOs interface directly to throttle/pedal-assist analog inputs and to gate-driver ICs without level shifters. The 48-LQFP industrial-grade package operates from -40C to +105C, suitable for the exterior controller housing. 64KB Flash holds the complete torque/speed map plus over-temperature, over-current, and battery-regeneration protection routines. SRAM stores the rolling telemetry buffer for CAN-bus or UART telemetry to the dashboard.
Recommended
Digital Power Conversion (PFC, LLC, Half-Bridge SMPS)
Digital power conversion leverages the MKV30F64VLF10's high-resolution PWM, dual 16-bit ADCs, and DSP-capable core to close voltage and current loops with sub-millisecond response. Power-factor-correction stages benefit from the dual-ADC simultaneous sampling of input voltage and current, while the FPU executes the boost PFC control law each PWM cycle. The KV3x family is well-served by NXP's reference firmware libraries for interleaved PFC and LLC converters. Hardware dead-time insertion and complementary PWM outputs simplify half-bridge and full-bridge topologies. Industrial temperature grade plus 48-LQFP packaging support server, telecom, and industrial PSUs. Existing firmware can scale from 64KB Flash down to the MKV30F64VLF10 or up to the 128KB MKV30F128VLF10 without code rework.
Recommended
Small Servo Drives and Robotics
Small servo drives for robotics, CNC tool changers, and auxiliary axes require precise sinusoidal commutation in a tight form factor. The MKV30F64VLF10 fits that role: its Cortex-M4F FPU delivers the 4 kHz to 16 kHz current loop deterministically, while the integrated encoder interface and 5V-tolerant GPIOs accept industrial encoder and endat signals directly. The 64KB Flash holds advanced servo feature sets - feed-forward compensation, vibration suppression, dual-loop position control - and 16KB SRAM is enough for parameter tables and command buffers. The 48-LQFP industrial-grade package and PCB-friendly footprint simplify custom drive-card design. KV3x SDK plus FreeMASTER real-time variable-watching accelerates servo-loop tuning, and drop-in migration to the 128KB MKV30F128VLF10 supports future feature expansion.
Recommended
Recommended Products Summary
Engineering reference data for MKV30F64VLF10 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MKV30F128VLF10 | MKV30F64VLF10R | MKV42F256VLH16P |
|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 64-LQFP (10x10) - different |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4F (DSP + FPU) | ARM Cortex-M4F (DSP + FPU) | ARM Cortex-M4F (DSP + FPU) | ARM Cortex-M4F (DSP + FPU) |
| Maximum Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 64 KB | 128 KB | 64 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 48 KB |
| ADC | Dual 16-bit, 1.2 MSPS | Dual 16-bit, 1.2 MSPS | Dual 16-bit, 1.2 MSPS | Dual 16-bit, 1.2 MSPS |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| RoHS Status | Compliant | Compliant | Compliant | Compliant |
| Approx 1pc Price (USD) | 6.50 | ~7.00 | ~6.50 | ~9.50 |
Key Differentiators
- Identical silicon at lower cost when Flash headroom is not needed (vs MKV30F128VLF10)
- Industry-leading 16-bit ADC throughput for FOC current sensing (vs MC56F8357VVFE)
- Industrial temperature grade standard, no automotive variant (vs MKV42F256VLH16P)
Design Notes
Decouple each VDD pin with a 100 nF X7R ceramic placed within 3 mm of the pin, and add a single 4.7 uF bulk cap on the board. For VDDA (analog supply), use a 100 nF + a ferrite bead tied to VDD; this reduces ADC-sample noise that would otherwise show up as position-loop dither on a motor. Estimated: at 100 MHz core and ~25 mA active current, total supply ripple should stay below 30 mV peak-peak to keep the Cortex-M4F internal regulator stable.
Keep the ADC0_DP0/ADC0_DM0 and ADC1_DP0/ADC1_DM0 differential traces short, length-matched within 2 mm, and surrounded by VSSA ground pours. The current-sensing shunt traces should be a Kelvin connection to the ADC pins, avoiding via stitching in the high-current path. Route PWM outputs away from analog traces to minimize switching-noise coupling into ADC samples - the PDB-trigger-based timing helps, but physical layout still matters.
When driving the FlexPWM complementary outputs into long gate-drive traces (>50 mm), add a 33 ohm series resistor close to the MCU pin to damp the LC tank formed by trace capacitance. The MKV30F64VLF10's GPIO drive strength is sufficient but the EMI signature can otherwise fail industrial EMC limits on the first prototype iteration. Estimated: at 12 ns rise time, a 33 ohm resistor with 5 pF load gives sub-1 ns RC damping - sufficient to flatten the ringing peak.
Do not assume all KV3x family members share the same peripheral pinout - the 32-QFN MKV30F64VFM10 uses a totally different pinout than the 48-LQFP MKV30F64VLF10, and a board designed for VLF will need rework to accept VFM. Always check the pinout table on the first page of the specific Kinetis KV30 datasheet before sourcing a 'replacement'.
Compliance Information
Lead-free, RoHS-compliant, halogen-free per NXP product environmental compliance. Industrial-grade (VL) only - no AEC-Q100 option. Tin (e3) terminal finish per JESD-609.