MPC8536EAVTAVLA - 1.5GHz e500 PowerPC MPU | NXP | 783-FCPBGA
MPN: MPC8536EAVTAVLA ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $95 | $95.00 |
| 10 | $89.5 | $895.00 |
| 100 | $82 | $8,200.00 |
| 500 | $76.5 | $38,250.00 |
| 1,000 | $72 | $72,000.00 |
MPC8536EAVTAVLA Overview
A microprocessor (MPU) integrates a complete CPU, caches, memory controller, and peripheral subsystem on one chip, sitting above microcontrollers in processing-power hierarchy: MPU -> CPU -> integrated circuit -> semiconductor. The e500 core implements the Power Architecture Book E instruction set with a 7-stage pipeline, dual-issue superscalar capability, and hardware multiply-accumulate, achieving high IPC alongside the 1.5 GHz clock.
Key features include 36-bit physical addressing for large-memory applications, a high-bandwidth DDR2/DDR3 SDRAM controller with ECC, integrated security (SEC 4.0 engine for protocol offload and bulk encryption), two PCI Express Gen 2.0 controllers, two SATA 2.0 ports multiplexed with SGMII, two USB 2.0 ports, three enhanced triple-speed Ethernet (eTSEC) controllers, and IEEE 1588 hardware timestamping. The 783-ball FC-PBGA package provides the pin density required for the device's wide memory and serial-I/O parallelism.
Typical applications include industrial routers and switches, network-attached storage (NAS) controllers, factory automation controllers, secure VPN gateways, and single-board computers in telecommunications infrastructure. The wide I/O integration and security engine make it especially suited to networked embedded systems requiring concurrent data-path and control-plane workloads.
When designing with this device, ensure adequate thermal management because the 1.5 GHz core and integrated SERDES can dissipate substantial power under sustained load; a multilayer PCB with thermal vias under the package is required. Always use NXP-supplied board support packages, U-Boot, or Linux SDK images to initialize cores, SERDES, and DDR PHYs before deploying application firmware.
Drop-in alternatives for MPC8536EAVTAVLA — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MPC8536EAVTAVLA (same form factor and footprint) — differing in Package, Core Architecture, Ethernet, Operating Temperature, SATA.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MPC8536EAVJAVLA
✅ Drop-In📋 Reference alternative (not in catalog)
MPC8536EBVJAVLA
✅ Drop-In📋 Reference alternative (not in catalog)
MPC8536EAVTAQLA
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MPC8536EVJAQGA
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MPC8536EAVTAVLA Maximum Ratings & Electrical Characteristics
| Manufacturer | NXP Semiconductors |
| Series | MPC85xx |
| Core Processor | PowerPC e500 |
| Core Count | 1 |
| Data Bus Width | 32-bit |
| Maximum Core Frequency | 1.5 GHz |
| Package | 783-FCPBGA (29x29 mm) |
| Mounting Type | Surface Mount |
| L1 Cache | 32 KB I-cache + 32 KB D-cache |
| Memory Controller | DDR2/DDR3 with ECC (36-bit physical addressing) |
| PCIe | 2 x PCIe Gen 2.0 controllers |
| SATA | 2 x SATA 2.0 (multiplexed with SGMII) |
| USB | 2 x USB 2.0 |
| Ethernet | 3 x eTSEC (10/100/1000 Mbps) |
| Security Engine | SEC 4.0 (bulk encryption, protocol offload) |
| IEEE 1588 Support | Yes (hardware timestamping) |
MPC8536EAVTAVLA 783-fcpbga (29x29 mm) Pin Configuration Guide
Pin configuration for MPC8536EAVTAVLA (783-fcpbga (29x29 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MPC8536EAVTAVLA.
Refer to the datasheet for full pin configuration.
Typical Applications
MPC8536EAVTAVLA is suitable for 7 applications: Industrial Managed Ethernet Switch, Network-Attached Storage (NAS) Controller, Secure VPN Gateway / Router, Factory Automation Controller (PLC / Motion Controller), Telecommunications Single-Board Computer, Industrial IoT Edge Gateway, Aerospace Avionics Data Concentrator.
Industrial Managed Ethernet Switch
The MPC8536EAVTAVLA drives the control plane of a managed Layer 2/3 Ethernet switch thanks to its three integrated eTSEC MACs with 10/100/1000 Mbps support and IEEE 1588 hardware timestamping. The e500 core at 1.5 GHz can run a Linux routing stack or NXP SDK control-plane software while offloading security to the SEC 4.0 engine. Compared with a discrete MAC plus microcontroller, this integration reduces board area and enables cut-through forwarding at sub-millisecond latency for industrial automation networks.
Recommended
Network-Attached Storage (NAS) Controller
The MPC8536EAVTAVLA's dual SATA 2.0 ports multiplexed with SGMII make it well suited to NAS enclosures supporting up to two 3.5-inch drives or SSD caches. The e500 core at 1.5 GHz delivers sufficient throughput for SMB/CIFS/NFS file serving while the SEC 4.0 engine accelerates AES-encrypted file-system operations. Compared with ARM9-class NAS SoCs, the e500 offers stronger single-threaded performance for metadata-heavy operations.
Recommended
Secure VPN Gateway / Router
The MPC8536EAVTAVLA targets secure VPN gateways with its SEC 4.0 engine accelerating IPsec AES-128/AES-256 and 3DES bulk encryption at line rate. Two PCIe Gen 2.0 controllers enable attachment of external crypto accelerators or additional NICs, while the integrated DDR2/DDR3 controller with ECC supports large connection-state tables. Compared with discrete crypto ASIC plus CPU designs, the integrated SEC reduces BoM and improves deterministic IPsec throughput under mixed workload.
Recommended
Factory Automation Controller (PLC / Motion Controller)
The MPC8536EAVTAVLA's deterministic interrupt response and 1.5 GHz single-core e500 pipeline suit motion controllers and high-end PLCs running IEC 61131-3 logic, EtherCAT master stacks, or PROFINET IRT. Two PCIe Gen 2.0 lanes can connect to a dedicated EtherCAT ASIC or industrial Ethernet controller, while the SEC engine secures remote-management TLS sessions. With NXP's 10+ year longevity program, the device supports long-life industrial deployments where revalidation cost dominates BOM savings.
Recommended
Telecommunications Single-Board Computer
The MPC8536EAVTAVLA anchors a small-footprint SBC for telecom edge equipment where two PCIe Gen 2.0 controllers connect FPGA framer/mapper logic, two USB 2.0 ports expose management consoles, and the 36-bit physical addressing allows large routing tables in main memory. Operating-system support from NXP's QorIQ Linux SDK, U-Boot, and mainline kernel accelerates time-to-market compared with proprietary RTOS stacks. Compared with multi-chip MPC85xx + ASIC designs, this SoC approach reduces board complexity.
Recommended
Industrial IoT Edge Gateway
The MPC8536EAVTAVLA is well matched to IIoT edge gateways aggregating Modbus/TCP, BACnet, and OPC UA fieldbus traffic onto Ethernet uplinks. The e500 core's strong single-thread performance handles protocol parsing and on-device analytics, the SEC engine secures TLS tunnels, and the DDR2/DDR3 controller with ECC accommodates large time-series buffers. Compared with ARM Cortex-A class parts, the e500 + SE-SOC architecture offers deterministic real-time response under mixed critical/non-critical workloads.
Recommended
Aerospace Avionics Data Concentrator
The MPC8536EAVTAVLA's 36-bit physical addressing and ECC-capable DDR2/DDR3 controller suit avionics data concentrators aggregating ARINC 429 / MIL-STD-1553 traffic under DO-178C certifiable RTOS workloads such as VxWorks. Its 783-FCPBGA package with controlled thermal envelope and extended-temperature availability (under the -E suffix ordering code) supports avionics bay environment profiles. Compared with non-ECC MPU solutions, the integrated memory controller reduces cockpit display latencies under sustained I/O.
Recommended
Recommended Products Summary
Engineering reference data for MPC8536EAVTAVLA — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MPC8536EAVJAVLA | MPC8536EBVJAVLA | MPC8536EAVTAQLA | MPC8536EVJAQGA | P1021NXE2HFB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 689-FCPBGA (31x31 mm) - different |
| Core | e500 (32-bit) | e500 (32-bit) | e500 (32-bit) | e500 (32-bit) | e500 (32-bit) | e500 (32-bit) |
| Maximum Core Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.0 GHz |
| Security Engine | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 3.3c |
| DDR Controller | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC |
| PCIe | 2 x PCIe Gen 2.0 | 2 x PCIe Gen 2.0 | 2 x PCIe Gen 2.0 | 2 x PCIe Gen 2.0 | 2 x PCIe Gen 2.0 | 2 x PCIe Gen 1.0 |
| SATA | 2 x SATA 2.0 (muxed with SGMII) | 2 x SATA 2.0 (muxed with SGMII) | 2 x SATA 2.0 (muxed with SGMII) | 2 x SATA 2.0 (muxed with SGMII) | 2 x SATA 2.0 (muxed with SGMII) | 2 x SATA 2.0 |
| Ethernet MACs | 3 x eTSEC (10/100/1000) | 3 x eTSEC (10/100/1000) | 3 x eTSEC (10/100/1000) | 3 x eTSEC (10/100/1000) | 3 x eTSEC (10/100/1000) | 3 x eTSEC (10/100/1000) |
| USB | 2 x USB 2.0 | 2 x USB 2.0 | 2 x USB 2.0 | 2 x USB 2.0 | 2 x USB 2.0 | 2 x USB 2.0 |
Key Differentiators
- Drop-in same-package replacement with active temperature-grade SKU variants (vs MPC8536EAVJAVLA)
- SEC 4.0 hardware crypto engine with same footprint (vs MPC8536AVTATHA (no 'E' - non-security))
- Newer silicon revision with errata fixes, same FCBGA-783 footprint (vs MPC8536EBVJAVLA)
Design Notes
Estimated: the MPC8536EAVTAVLA at 1.5 GHz with all SERDES lanes active can dissipate 8-12 W of power. The 783-FCPBGA's theta_JA is approximately 12-15 C/W under typical JEDEC EIA/JESD51 multilayer PCB conditions, yielding a 96-180 C junction-rise at ambient. Required mitigation: at least four thermal-via arrays under the package substrate, generous copper inner planes on top/bottom layers, and a heatsink over the BGA top with optional airflow. Without these measures the part will throttle or trigger thermal shutdown in sealed enclosures.
The 783-FCPBGA's 1.0 mm ball pitch demands at least a 6-layer PCB (8 layers recommended) with controlled-impedance stackup for DDR, PCIe, SATA, and SGMII SERDES. Match differential pairs within 5 mil length tolerance for SATA/PCIe Gen 2 to keep jitter within the 100 MHz reference clock budget. Use a continuous ground reference under SERDES lanes to control return-loss; split reference planes across SERDES boundaries usually produces EMI compliance failures.
DDR2/DDR3 trace lengths must be matched per byte lane within 25 mil, with class-II impedance (50 ohms single-ended, 100 ohms differential) terminating at the VTT regulator near the DIMM or chip. Place the DDR reference voltage decoupling (0.1 uF X7R per pin) within 200 mil of each VTT pin. Keep the DDR clock pair skew under 10 mil relative to the strobe and route it 3W from any parallel data to control crosstalk.
SERDES pre-emphasis and de-emphasis values for PCIe and SGMII must be tuned after PCB fab using the NXP SerDes Toolkit to compensate for channel loss at 5 Gbps; uncompensated pre-emphasis generally fails compliance on long traces greater than 6 inches. Run SI simulation with measured S-parameters extracted from the final stackup before committing to volume production. Failing PCIe Gen 2 compliance usually points to common-mode choke placement or AC-coupling capacitor value mismatch.
Common bring-up pitfalls with the MPC8536EAVTAVLA: (1) missing RC delay on HRESET that violates the JTAG boundary-scan timing, (2) incorrect SERDES protocol multiplexing (PCIe vs SGMII vs SATA) configuration in RCW that locks up the device at POR, (3) failing to enable the DDR controller write leveling before ECC init. Always use the QorIQ Linux SDK reference board support package as a known-good starting point and validate RCW values against the latest silicon errata document before commissioning hardware.
Compliance Information
NXP publishes the RoHS/REACH certificate of compliance in the product environmental compliance section of the quality documentation portal. The 783-FCPBGA package uses lead-free solder balls and Pb-free assembly as standard. Long-life product program participation ensures 10+ year supply. For AEC-Q100, the device is not automotive-qualified; use NXP's automotive-grade MPC-class chips for AEC environments.