MSP430F4793IPZ - 16MHz Metering MCU | Texas Instruments
MPN: MSP430F4793IPZ ✓ ActiveMSP430F4793IPZ Overview
An ultra-low-power microcontroller is a semiconductor designed to complete control and measurement tasks while minimizing energy consumption. The MSP430F4793IPZ belongs to the MSP430 family of 16-bit RISC devices and targets battery-powered sensing, electricity metering, and portable instrumentation. Its five low-power operating modes and integrated metering peripherals reduce the need for separate analog, display, and control components.
Three sigma-delta ADCs support precision measurement, while the 160-segment LCD controller can drive a segmented display directly. The device includes 60 KB of Flash for firmware and constants, plus 2.5 KB of RAM for working data. A 16 MHz CPU clock provides processing headroom for sampling, calibration, communication, and display management, while operation from 2.5 V to 3.3 V supports common embedded supply rails.
The MSP430 architecture uses a 16-bit RISC CPU with 16-bit registers and a constant-memory design suited to low-power portable measurement. Integrating the sigma-delta converters and LCD controller reduces board area and software overhead, but designers must still account for analog input conditioning, reference accuracy, LCD bias requirements, and the power consumed by the display. These considerations are particularly important in designs where sensor accuracy must remain stable over long operating periods.
Typical uses include single-phase electricity meters, portable energy monitors, industrial sensing instruments, battery-powered data loggers, and compact equipment with segmented LCD displays. For metering designs, the three ADCs support multiple analog channels, and the 60 KB Flash capacity allows meter constants, calibration tables, and firmware to share one controller. For handheld measurement products, the low-power architecture helps reduce standby consumption and extend battery life.
PCB implementation should preserve clean analog routing, provide suitable input filtering, and follow the manufacturer’s pin and layout guidance. The 100-pin LQFP package requires adequate copper and thermal planning, while the LCD and ADC interfaces should be positioned away from high-current switching paths. Firmware should also verify startup behavior, calibration limits, low-power transitions, and display timing before field deployment.
This product page combines manufacturer specifications, package information, commercially focused sourcing guidance, and practical selection considerations for engineers designing around the MSP430F4793IPZ. It is intended to support initial design decisions, comparison with related MSP430 devices, and preparation of a qualified bill of materials.
Drop-in alternatives for MSP430F4793IPZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MSP430F4793IPZ (same form factor and footprint) — differing in CPU Architecture, Flash Memory, Package, Product Type, RAM.
MSP430F4794IPZ
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MSP430F4792IPZ
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MSP430F4791IPZ
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MSP430F4793IPZ Maximum Ratings & Electrical Characteristics
| Product Type | Single-phase metering microcontroller |
| CPU Architecture | 16-bit MSP430 RISC |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 60 KB |
| RAM | 2.5 KB |
| Sigma-Delta ADC Count | 3 |
| LCD Segments | 160 segments |
| Supply Voltage Range | 2.5 V to 3.3 V |
| Low-Power Modes | 5 modes |
| Package | 100-pin LQFP (PZ), 14 mm x 14 mm |
| Mounting Type | Surface mount |
| Operating Temperature Range | -40 °C to +85 °C |
| Temperature Grade | Industrial |
| Terminal Count | 100 pins |
| Package Code | PZ |
MSP430F4793IPZ pz Pin Configuration Guide
Pin configuration for MSP430F4793IPZ (pz package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MSP430F4793IPZ.
Refer to the datasheet for full pin configuration.
Typical Applications
MSP430F4793IPZ is suitable for 6 applications: Single-Phase Electricity Metering, Portable Energy Monitoring, Industrial Sensor Interface, Battery-Powered Data Logger, Smart Utility Instrumentation, Precision Measurement Instrument.
Single-Phase Electricity Metering
The MSP430F4793IPZ fits single-phase electricity meters because it combines a 16 MHz 16-bit CPU with three sigma-delta ADCs and 60 KB of Flash in one controller. The converters can support analog current and voltage acquisition, while Flash can hold firmware, calibration coefficients, and metering constants. Its 2.5 V to 3.3 V operating range aligns with compact meter designs using a regulated 3.3 V rail. The 160-segment LCD controller also removes a separate display-driver component when the meter uses a compatible segmented glass. Engineers should verify converter input ranges, acquisition timing, LCD bias requirements, and calibration behavior in the manufacturer documentation before releasing the production design.
Recommended
Portable Energy Monitoring
The MSP430F4793IPZ suits portable energy monitors that must combine measurement, local display, and low-power standby behavior. Its MSP430 architecture includes five low-power operating modes, while the 16 MHz CPU provides capacity for filtering, calibration, and data processing between measurement intervals. Two and a half kilobytes of RAM can hold working samples and status information, and 60 KB of Flash supports firmware plus stored constants. A 160-segment LCD is useful for displaying instantaneous power, accumulated energy, units, and status without adding a separate display controller. For battery-powered operation, firmware should keep the display and converters disabled during idle intervals and use the manufacturer’s wake-up and low-power sequences to prevent unintended current consumption.
Recommended
Industrial Sensor Interface
The MSP430F4793IPZ can serve as the controller for a compact industrial sensor interface when several slowly varying analog quantities must be acquired and presented locally. Three sigma-delta ADCs provide dedicated measurement channels, and the 16-bit CPU can execute filtering, offset correction, and scaling routines without an external host processor. The 60 KB Flash capacity is sufficient for application firmware and calibration tables, while the 2.5 KB RAM supports acquisition buffers and communication state. If the interface includes a segmented LCD, the integrated 160-segment controller simplifies the mechanical and electrical design. Signal-chain validation remains essential because sensor excitation, analog filtering, grounding, and converter settling can determine overall measurement accuracy more than nominal CPU speed.
Recommended
Battery-Powered Data Logger
The MSP430F4793IPZ is appropriate for a battery-powered data logger that periodically measures analog inputs and records results locally. Its five low-power modes allow the firmware to remain dormant between samples, while the 16 MHz MSP430 CPU completes each measurement sequence quickly when awakened. The three sigma-delta ADCs support multiple sensing channels, and 60 KB of Flash provides room for firmware, configuration, and compact historical records. A segmented LCD can display battery status, current readings, and logging state when a long battery life is important. The design should include a controlled wake-up source, low-leakage analog paths, and an optimized retention strategy, because periodic display updates and sensor conditioning can dominate the average current even when the microcontroller itself is placed in a low-power state.
Recommended
Smart Utility Instrumentation
The MSP430F4793IPZ can support smart utility instrumentation that combines analog measurement with a local segmented display. Its integrated 160-segment LCD controller is suited to displaying consumption, demand, status indicators, and diagnostic information without a separate graphics controller. The three sigma-delta ADCs support the measurement channels, while 60 KB of Flash and 2.5 KB of RAM accommodate application firmware, metering constants, and short-term data processing. In designs that add communications, the 16 MHz CPU can manage a serial protocol and maintain timing for acquisition and display updates. Engineers should reserve pins and firmware resources for the selected communication interface, verify LCD segment mapping, and confirm supply current behavior across operating modes before finalizing the utility instrument enclosure and power budget.
Recommended
Precision Measurement Instrument
The MSP430F4793IPZ fits compact precision instruments that combine several analog measurements with local human-readable output. The three sigma-delta ADCs provide acquisition channels, and the 16-bit MSP430 processor can execute calibration and filtering while preserving a straightforward embedded software model. With 60 KB Flash and 2.5 KB RAM, the device has useful capacity for firmware, compensation tables, and working data without requiring external memory. The 160-segment LCD controller enables cost-effective presentation of measurement values and operating status. For laboratory or field instrumentation, layout should keep analog inputs away from LCD and digital switching paths, use stable references and filtering, and validate accuracy across temperature. This integration reduces board area while preserving the control and display functions expected in a standalone instrument.
Recommended
Recommended Products Summary
Engineering reference data for MSP430F4793IPZ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MSP430F4794IPZ | MSP430F4792IPZ | MSP430F4791IPZ |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-pin LQFP (PZ) | 100-pin LQFP (PZ) | 100-pin LQFP (PZ) | 100-pin LQFP (PZ) |
| CPU Architecture | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC |
Key Differentiators
- Three integrated sigma-delta ADCs (vs MSP430F4794IPZ)
- Large integrated segmented display controller (vs MSP430F4792IPZ)
- 16 MHz processing capacity (vs MSP430F4791IPZ)
Design Notes
Keep the three sigma-delta ADC inputs on short, quiet traces with filtering located close to the source or MCU pins. Separate analog returns from LCD drive and digital switching paths where the board stackup permits. Confirm reference, input-range, settling-time, and grounding requirements in the manufacturer datasheet before fixing component values, because external signal conditioning can determine the final measurement accuracy.
Design the 2.5 V to 3.3 V supply so it remains stable while the ADC converters, LCD controller, and CPU operate together. Use the manufacturer’s recommended decoupling arrangement and place high-frequency bypass capacitance close to the supply pins. Measure average and peak current in every operating mode, including display-on and converter-active states, because these loads can dominate the energy budget of a battery-powered meter.
Use the 100-pin LQFP (PZ) land pattern from the manufacturer package drawing and preserve adequate solder-mask clearance around the fine-pitch leads. The tray-packed MSP430F4793IPZ and reel-packed MSP430F4793IPZR have the same electrical device designation but different handling logistics; confirm the exact suffix for each BOM line and production process to avoid an assembly-system mismatch.
Do not treat a family member as an automatic replacement. Validate ADC count and configuration, LCD mapping, pin multiplexing, memory capacity, supply limits, clock setup, and firmware behavior between the original and candidate device. The MSP430F4793IPZ is specifically identified as a three-sigma-delta-ADC, 160-segment-LCD metering MCU, so peripheral differences can alter the PCB and firmware even when the package remains the same.
Compliance Information
Compliance status is not stated on the manufacturer product page excerpts identified for this device. The package is described as industrial grade and the operating range is -40 °C to +85 °C, but temperature grade does not by itself establish AEC-Q100 qualification.