PD-USB-DP60 - PoE to USB-C 60W Adapter | Microchip Technology
MPN: PD-USB-DP60 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $165 | $165.00 |
| 10 | $152 | $1,520.00 |
| 25 | $140 | $3,500.00 |
| 50 | $132 | $6,600.00 |
| 100 | $124 | $12,400.00 |
PD-USB-DP60 Overview
A Power over Ethernet to USB-C adapter is a powered device (PD) that combines a PoE front-end (compliant with IEEE 802.3bt/at/af) with a USB-C Power Delivery (PD) sink/source controller and a USB-Ethernet bridge. In the broader hierarchy it sits within the power management > PoE powered-device category, bridging wired Ethernet infrastructure to the modern USB-C ecosystem used by tablets, laptops, NUCs, IP cameras, and information kiosks. By collapsing power and data onto a single Cat5e/Cat6 cable, it eliminates two long-standing pain points: AC outlet scarcity at endpoint locations and the inherent distance limits of native USB cables.
Key features include 60W maximum output (20 V at 3 A) under USB PD, 10/100/1000 Mbps Gigabit Ethernet pass-through, USB 3.1 Gen 1 (5 Gbps) data through the integrated Microchip LAN7800 USB-to-Ethernet bridge, and a USB-C receptacle that supports plug-and-play on Windows hosts. The enclosure is a compact industrial-grade housing designed for fixed installation behind displays, under desks, or in ceiling-mounted camera deployments. IEEE 802.3bt compliance lets the PD-USB-DP60 negotiate the full 90 W PoE budget and draw up to 60 W for the USB-C load while leaving margin for cable and connector losses.
Technically, the adapter integrates a PoE PD interface, a DC-DC conversion stage, a USB PD controller advertising 5 V/9 V/15 V/20 V profiles, and the LAN7800 bridge mapping the upstream Gigabit Ethernet to a USB 3.1 Gen 1 device port. This architecture means a downstream USB-C host sees the adapter as a wired GbE NIC plus a USB-PD power source, enabling single-cable operation for thin clients, mini PCs, and conferencing equipment. Thermal design is passive, relying on the metal enclosure as a heatsink for the internal 60 W conversion stage.
Typical applications include IP cameras and video conferencing bars in conference rooms, interactive digital signage and information kiosks, small-form-factor PCs and NUCs deployed in ceiling or wall locations, smart monitors and displays that need power plus Ethernet from a single cable, and industrial IoT endpoints where USB-C is the standard host port. It is also a strong fit for AV-over-IP endpoints and PoE-powered LED controllers that use USB-C as a service or configuration port.
When designing with the PD-USB-DP60, ensure the upstream PoE switch or midspan provides at least 802.3bt (Type 3 or Type 4) so the adapter can deliver a full 60 W output. Lower PoE classes will negotiate a reduced USB-PD profile. Plan for a maximum 100 m Cat5e/Cat6 run between the PoE source and the adapter, and confirm that the USB-C device you connect supports USB Power Delivery at the requested voltage profile.
This page synthesizes distributor pricing, a drop-in alternative analysis, and practical installation guidance not found in the manufacturer datasheet alone.
Drop-in alternatives for PD-USB-DP60 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
PD-USB-DP30
✅ Drop-In📋 Reference alternative (not in catalog)
PD-USB-DP25
✅ Drop-In📋 Reference alternative (not in catalog)
PD-USB-DP60 Maximum Ratings & Electrical Characteristics
| Product Type | PoE to USB-C Power and Data Adapter |
| Input Interface | Ethernet RJ-45 (PoE PD) |
| PoE Standard | IEEE 802.3bt / at / af compliant |
| Maximum PoE Run Length | 100 m (328 ft) over single Ethernet cable |
| Output Interface | USB Type-C receptacle |
| Maximum Output Power | 60 W |
| USB PD Output Profile | 5 V / 9 V / 15 V / 20 V up to 3 A |
| Data Throughput (USB) | USB 3.1 Gen 1 (5 Gbps) |
| Ethernet Speed | 10/100/1000 Mbps (Gigabit) |
| USB-Ethernet Bridge | Microchip LAN7800 |
| Plug-and-Play | Yes (Windows host driver auto-install) |
| Mounting Type | Fixed / inline (enclosed adapter) |
| Cooling | Passive (metal enclosure heatsinking) |
| Compliance | IEEE 802.3bt, USB Power Delivery, USB 3.1 Gen 1 |
| RoHS Status | Compliant |
PD-USB-DP60 standard Pin Configuration Guide
Pin configuration for PD-USB-DP60 (standard package). This power device features gate, drain, and source terminals. For non-polarized packages, refer to the manufacturer datasheet for exact pin 1 orientation and footprint details. Common applications include power supply design, motor driving, and load switching.
No detailed pinout data available for PD-USB-DP60.
Refer to the datasheet for full pin configuration.
Typical Applications
PD-USB-DP60 is suitable for 6 applications: IP Cameras and Video Conferencing Bars, Interactive Digital Signage and Information Kiosks, Small-Form-Factor PCs and NUCs, Smart Monitors and Conference Room Displays, Industrial IoT Endpoints with USB-C Service Ports, AV-over-IP Endpoint Power and Connectivity.
IP Cameras and Video Conferencing Bars
The PD-USB-DP60's 60 W USB-C Power Delivery output and Gigabit Ethernet pass-through make it ideal for ceiling-mounted IP cameras and conference-room video bars. Most high-end USB-C conferencing cameras (Logitech Rally Bar, Poly Studio, etc.) draw 36-60 W under USB PD; the PD-USB-DP60 supplies the full profile while delivering 1 Gbps network connectivity on the same cable, eliminating the need for separate power and data drops. Using IEEE 802.3bt upstream, the adapter negotiates the full PoE budget and supports runs up to 100 m, allowing cameras to be installed in large boardrooms far from the nearest IDF. The integrated LAN7800 bridge presents the GbE link as a standard USB-C Ethernet adapter to the host, requiring no proprietary drivers on modern Windows or macOS kernels.
Recommended
Interactive Digital Signage and Information Kiosks
Retail and transit kiosks increasingly use USB-C-powered tablets or small displays as the customer-facing interface. The PD-USB-DP60 supplies up to 60 W to the kiosk's USB-C host while passing through wired Internet for content updates and telemetry, all over a single Cat6 cable from a back-room PoE switch. Compared with running AC mains to each kiosk location, this approach dramatically simplifies installation and reduces per-site electrical cost. Kiosk integrators value the adapter's plug-and-play behavior on Windows hosts (no driver installation required) and its passive metal-enclosure cooling, which is critical for unattended 24/7 deployments where fan noise or failure cannot be tolerated.
Recommended
Small-Form-Factor PCs and NUCs
Intel NUCs and similar mini-PCs are commonly deployed in ceilings, behind displays, or inside digital signage enclosures where AC outlets are unavailable. The PD-USB-DP60 powers these hosts via USB-C at up to 60 W while providing Gigabit Ethernet for network connectivity - effectively delivering a single-cable docking experience. For NUC models that natively accept USB-C PD input, the adapter is a turnkey solution; for NUCs requiring barrel-jack DC, a USB-C PD trigger cable bridges the voltage profile. The adapter's 100 m PoE reach removes the 5-15 m USB-cable limitation that constrained prior NUC placement.
Recommended
Smart Monitors and Conference Room Displays
Modern USB-C conference-room monitors draw 45-65 W from the host laptop or dock and expect simultaneous DisplayPort Alt-Mode video plus USB data. The PD-USB-DP60's 60 W budget aligns with most conference-room displays, allowing a fixed monitor to be installed in a huddle space with only a single PoE cable feeding it from the wall plate. The adapter's USB 3.1 Gen 1 data path complements USB-C peripherals such as webcams, microphones, and touch overlays that hang off the display. Reducing cable count at each conference table from 3-4 (HDMI, USB-B, power, Ethernet) to one PoE run simplifies room design and lowers furniture cost.
Recommended
Industrial IoT Endpoints with USB-C Service Ports
Industrial controllers, edge-AI boxes, and PoE-powered LED controllers increasingly expose USB-C as a service/configuration port that engineers use for diagnostics and firmware updates. The PD-USB-DP60 lets these endpoints be installed anywhere a PoE drop exists, providing both 60 W operating power and a USB-C diagnostic interface with wired Ethernet for remote management. Factory-floor deployments benefit from the adapter's metal enclosure (mechanical robustness), wide operating temperature range, and lack of moving parts (no fans, no relays), which maximize mean time between failures.
Recommended
AV-over-IP Endpoint Power and Connectivity
AV-over-IP encoders and decoders (Dante, NDI, SDVoE) are typically installed behind displays, in ceiling boxes, or in equipment closets far from any AC outlet. The PD-USB-DP60 lets each endpoint draw 60 W over PoE while passing through Gigabit Ethernet - which is the same cable carrying the AV stream. This eliminates the need for separate power supplies and reduces rack wiring density. For AV integrators standardizing on PoE infrastructure, the adapter provides a clean USB-C termination at every endpoint for service laptops without running additional AC circuits.
Recommended
Recommended Products Summary
Engineering reference data for PD-USB-DP60 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PD-USB-DP30 | PD-USB-DP25 |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package / Form Factor | Enclosed inline adapter (RJ-45 in, USB-C out) | Enclosed inline adapter (same housing family) | Enclosed inline adapter (same housing family) |
| Maximum USB-C Output Power | 60 W | 30 W | 25 W |
| USB PD Output Profile | 5/9/15/20 V up to 3 A | 5/9/15/20 V up to 1.5 A | 5/9/15/20 V up to 1.25 A |
| PoE Input Standard | IEEE 802.3bt/at/af | IEEE 802.3at/af | IEEE 802.3at/af |
| Maximum PoE Run Length | 100 m (328 ft) | 100 m (328 ft) | 100 m (328 ft) |
| Ethernet Speed | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100 Mbps |
| USB Data Throughput | USB 3.1 Gen 1 (5 Gbps) | USB 3.1 Gen 1 (5 Gbps) | USB 2.0 (480 Mbps) |
Key Differentiators
- Highest 60 W output in the PD-USB family (vs PD-USB-DP30)
- Gigabit Ethernet pass-through alongside USB-C (vs PD-USB-DP25)
- Single-cable USB 3.1 Gen 1 data path (vs PD-USB-DP25)
Design Notes
Ensure the upstream PoE switch or midspan is IEEE 802.3bt (Type 3 or Type 4) capable. With 802.3at (Type 2) sources the PD-USB-DP60 will negotiate a lower USB-PD profile (typically 30 W or less), and with 802.3af (Type 1) only 15 W is available. The full 60 W output requires a 4-pair PoE delivery. Source: Microchip datasheet DS00003813.
Use Cat5e or Cat6 Ethernet cabling rated for the full 100 m run. For 802.3bt at 90 W PoE, use 23 AWG conductors to minimize DC resistance; 24 AWG may exceed the 12.5 W loss budget for long runs. Place the PD-USB-DP60 in a ventilated location - although it uses passive cooling, derate to 80% of rated output in enclosed spaces above 35 C ambient.
Do not connect the PD-USB-DP60 to a non-PoE Ethernet switch without an 802.3bt/at/af midspan - the adapter is a powered device and will not link without PoE negotiation. Likewise, the USB-C device connected downstream must support USB Power Delivery as a sink; USB-C hosts that only support 5 V default will draw at most 15 W regardless of the adapter's capability.
Compliance Information
RoHS compliant per Microchip product page. Not AEC-Q100 qualified (industrial/commercial IT product, not automotive). Halogen-free status not explicitly published for the assembled adapter.
