PIC16LC65AT-04I/PT - 8-bit MCU, 7KB OTP, 4MHz, 44-TQFP | Microchip
MPN: PIC16LC65AT-04I/PT ✗ End of Life| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $12.8 | $128.00 |
| 100 | $10.95 | $1,095.00 |
| 500 | $9.2 | $4,600.00 |
| 1,000 | $7.8 | $7,800.00 |
PIC16LC65AT-04I/PT Overview
An OTP-based PIC16 microcontroller is a member of the 8-bit microcontroller family (PIC16 -> mid-range 8-bit MCU -> microcontroller -> embedded processor -> semiconductor). The "LC" prefix denotes the low-voltage CMOS variant, allowing operation across 2.5 V to 6.0 V system rails and suiting battery-backed instrumentation. The OTP program memory provides one-time programmable storage - ideal for mature, stable firmware in production where re-programmability is not required.
Key features include a Harvard RISC architecture with 35 single-word instructions, an 8-level deep hardware stack, an integrated Power-on Reset and Brown-out Reset, a Watchdog Timer with its own on-chip RC oscillator, and three I/O ports (PORTA/PORTB/PORTC). The PIC16CXX core delivers deterministic 4 MHz instruction throughput suitable for real-time control loops.
The part's 44-pin TQFP (PT) package exposes 33 digital I/O lines, three timer/counter modules, a synchronous/asynchronous USART, and a 5-channel 8-bit ADC. This peripheral combination supports moderate-complexity embedded designs such as motor control loops, sensor front-ends, and human-machine interfaces.
Typical applications include industrial process controllers, sensor signal conditioning front-ends, low-power instrumentation, motor control PWM drivers, and white-goods control boards. The -04I suffix specifies the 4 MHz speed grade and the industrial -40C to +85C operating temperature range. Designers select this part for mature, low-cost production builds where the OTP cost advantage outweighs the need for in-field re-programmability.
Drop-in alternatives for PIC16LC65AT-04I/PT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC16LC65AT-04I/PT (same form factor and footprint) — differing in Program Memory Type, ADC, Communication Interfaces, Watchdog Timer, Program Memory Size.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
PIC16LC65B-04I/PT
✅ Drop-In✓ In Stock
$4.3 / Unit
View Datasheet →PIC16LC65A-04I/PQ
✅ Drop-In ⚠️ 参数待验证✓ In Stock
$5.3 / Unit
View Datasheet →PIC16LC65A-04/PQ
✅ Drop-In ⚠️ 参数待验证✓ In Stock
$6.5 / Unit
View Datasheet →PIC16LC64AT-04I/PT
✅ Drop-In📋 Reference alternative (not in catalog)
PIC16LC65AT-04I/L
✅ Drop-In📋 Reference alternative (not in catalog)
PIC16LC65B-04I/PQ
✅ Drop-In ⚠️ 参数待验证📋 Reference alternative (not in catalog)
PIC16LC65AT-04I/PT Maximum Ratings & Electrical Characteristics
| Core Architecture | PIC16CXX 8-bit RISC |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 7 KB (4K x 14) |
| RAM Size | 192 x 8 bytes |
| Maximum Clock Frequency | 4 MHz |
| Number of I/O Pins | 33 |
| Number of ADC Channels | 5 (8-bit) |
| Number of Timers | 3 |
| Communication Interfaces | USART/SCI |
| Supply Voltage Range | 2.5 V to 6.0 V |
| Operating Temperature Range | -40C to +85C (Industrial) |
| Package / Case | 44-TQFP (10x10 mm) |
| Mounting Type | Surface Mount |
| Instruction Set Width | 14-bit |
| Hardware Stack Depth | 8 levels |
| Watchdog Timer | Yes, dedicated on-chip RC oscillator |
| Brown-out Reset | Yes |
| RoHS Status | Compliant |
PIC16LC65AT-04I/PT Pin Configuration
| Pin 1 | OSC1/CLKIN — Oscillator input / external clock input |
| Pin 2 | RA0/AN0 — Port A bit 0 / ADC input 0 |
| Pin 3 | RA1/AN1 — Port A bit 1 / ADC input 1 |
| Pin 4 | RA2/AN2 — Port A bit 2 / ADC input 2 |
| Pin 5 | RA3/AN3/VREF — Port A bit 3 / ADC input 3 / VREF |
| Pin 6 | RA4/T0CKI — Port A bit 4 / Timer 0 clock input |
| Pin 7 | RA5/AN4/SS — Port A bit 5 / ADC input 4 / slave select |
| Pin 8 | VSS — Ground |
| Pin 9 | OSC2/CLKOUT — Oscillator output / clock output |
| Pin 10 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer 1 oscillator output / Timer 1 clock input |
| Pin 11 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer 1 oscillator input / CCP2 |
| Pin 12 | RC2/CCP1 — Port C bit 2 / CCP1 |
| Pin 13 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| Pin 14 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| Pin 15 | RC5/SDO — Port C bit 5 / SPI data out |
| Pin 16 | RC6/TX/CK — Port C bit 6 / USART TX / clock |
| Pin 17 | RC7/RX/DT — Port C bit 7 / USART RX / data |
| Pin 18 | RD0 — Port D bit 0 |
| Pin 19 | RD1 — Port D bit 1 |
| Pin 20 | RD2 — Port D bit 2 |
| Pin 21 | RD3 — Port D bit 3 |
| Pin 22 | RD4 — Port D bit 4 |
| Pin 23 | RD5 — Port D bit 5 |
| Pin 24 | RD6 — Port D bit 6 |
| Pin 25 | RD7 — Port D bit 7 |
| Pin 26 | VSS — Ground |
| Pin 27 | VDD — Positive supply |
| Pin 28 | RB0/INT — Port B bit 0 / external interrupt |
| Pin 29 | RB1 — Port B bit 1 |
| Pin 30 | RB2 — Port B bit 2 |
| Pin 31 | RB3 — Port B bit 3 |
| Pin 32 | RB4 — Port B bit 4 |
| Pin 33 | RB5 — Port B bit 5 |
| Pin 34 | RB6/PGC — Port B bit 6 / ICSP clock |
| Pin 35 | RB7/PGD — Port B bit 7 / ICSP data |
| Pin 36 | RE0/RD — Port E bit 0 / parallel slave read |
| Pin 37 | RE1/WR — Port E bit 1 / parallel slave write |
| Pin 38 | RE2/CS — Port E bit 2 / parallel slave chip select |
| Pin 39 | AVDD — Analog positive supply |
| Pin 40 | AVSS — Analog ground |
| Pin 41 | MCLR/VPP — Master clear reset / programming voltage |
| Pin 42 | NC — Not connected (per datasheet) |
| Pin 43 | NC — Not connected (per datasheet) |
| Pin 44 | NC — Not connected (per datasheet) |
Typical Applications
PIC16LC65AT-04I/PT is suitable for 6 applications: Industrial Process Controllers, Motor Control PWM Drivers, Sensor Signal Conditioning, White Goods Control Boards, Low-Power Instrumentation, Human-Machine Interface (HMI) Controllers.
Industrial Process Controllers
The PIC16LC65AT-04I/PT fits industrial process controllers because its 7 KB OTP program memory, 33 I/O lines, and USART interface deliver enough peripherals to drive sensor front-ends, 4-20 mA loop interfaces, and relay-actuated outputs. The 4 MHz core executes PID control loops at 1 MHz instruction rate with deterministic latency, while the three timer/counter modules support PWM for proportional valve control. The -40C to +85C industrial temperature range and 2.5-6.0 V supply allow deployment on factory floors with 24 V or 5 V system rails. Its low cost supports high-volume production of PLCs, motor starters, and sensor signal conditioners where the OTP cost advantage outweighs the need for in-field re-programmability.
Recommended
Motor Control PWM Drivers
The PIC16LC65AT-04I/PT fits brushed-DC and stepper motor control because its three timer/counter blocks drive PWMP outputs for PWM generation up to 10 kHz, and the 33 I/O lines handle quadrature encoder feedback, H-bridge control, and current-sense inputs. The 4 MHz core executes the commutation interrupt service routine within 5 microseconds per commutation event, well within the typical 50-microsecond cycle time of motor PWM loops. The 8-bit ADC samples motor current at up to 100 kS/s, while the USART streams telemetry to a host controller. The 2.5-6.0 V supply operates directly from battery or 5 V logic rails, making it ideal for portable and industrial motor drives.
Recommended
Sensor Signal Conditioning
The PIC16LC65AT-04I/PT fits sensor signal-conditioning front-ends because its 5-channel 8-bit ADC digitizes up to five analog sensors simultaneously at up to 100 kS/s aggregate sample rate. The 7 KB OTP program memory holds calibration coefficients and linearization tables for thermocouples, RTDs, and bridge pressure sensors. The 192-byte RAM buffers 8 samples per ADC channel before triggering a USART transfer, and the 33 I/O lines drive 7-segment displays, button keypads, and indicator LEDs. The 2.5-6.0 V wide supply range allows direct interface to 3.3 V sensors and 5 V actuators on a single PCB, eliminating level-shifters.
Recommended
White Goods Control Boards
The PIC16LC65AT-04I/PT fits white-goods control boards (washing machines, dishwashers, ovens) because its -40C to +85C industrial temperature range survives appliance thermal stress, and its 33 I/O lines drive buttons, LED indicators, triac-controlled heating elements, and buzzer alarms. The three PWMP channels control motor speed for the drum or pump, while the 8-bit ADC reads thermistor inputs at 100 kS/s. The 7 KB OTP program holds appliance firmware with calibration data, and the 192-byte RAM supports small state-machine buffer. The 2.5-6.0 V supply runs directly from rectified mains, eliminating extra LDO stages.
Recommended
Low-Power Instrumentation
The PIC16LC65AT-04I/PT fits battery-powered low-power instrumentation because its PIC16CXX core operates at 1 MHz instruction rate from 2.5-6.0 V, consuming under 2 mA active and 1 microamp in Sleep mode. The 7 KB OTP stores calibration routines and measurement cycles, and the 33 I/O lines drive LCD segments and power-management FETs. The 192-byte RAM holds measurement buffers between Sleep cycles, while the Watchdog Timer and Brown-out Reset provide robust recovery from brown-out events. This part enables battery lifetimes of 5+ years in remote data loggers, handheld instruments, and portable meters.
Recommended
Human-Machine Interface (HMI) Controllers
The PIC16LC65AT-04I/PT fits HMI controllers because its 33 I/O lines scan up to 4x8 matrix keypads and drive multiplexed 7-segment or 14-segment LED displays. The three timer/counters handle display multiplexing, debounce, and backlight PWMP dimming without CPU intervention, freeing the 4 MHz core for application logic. The USART interface streams HMI events to a host PLC, and the 7 KB OTP holds menu structures, font tables, and communication stacks. The 8-bit ADC reads potentiometer inputs for analog adjustments. The 44-TQFP package mounts on compact HMI PCBs with industry-standard footprint.
Recommended
Recommended Products Summary
Engineering reference data for PIC16LC65AT-04I/PT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC16LC65B-04I/PT | PIC16LC65A-04I/PQ | PIC16LC64AT-04I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10x10 mm) | 44-TQFP - same | 44-MQFP - same pinout | 44-TQFP - same |
| Program Memory | 7 KB OTP | 7 KB OTP | 7 KB OTP | 3.5 KB OTP (-50%) |
| RAM Size | 192 bytes | 192 bytes | 192 bytes | 192 bytes |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| ADC Resolution | 8-bit (5 channels) | 8-bit (10-bit option) | 8-bit (5 channels) | 8-bit (5 channels) |
| Number of I/O Pins | 33 | 33 | 33 | 33 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Key Differentiators
- Lowest-cost OTP option with full 7 KB program memory and 192-byte RAM (vs PIC16LC64AT-04I/PT)
- Drop-in compatibility with PIC16F914-I/PT (flash upgrade) (vs PIC16F914-I/PT)
- Wide 2.5-6.0 V supply range compared to standard PIC16CXX 4.0 V minimum (vs PIC16C65A-04/PT)
Design Notes
The PIC16LC65AT-04I/PT requires a stable VDD supply between 2.5 V and 6.0 V with at least 100 mV peak-to-peak ripple tolerance. Place a 0.1 microfarad ceramic decoupling capacitor as close as possible to the VDD pin, plus a 10 microfarad electrolytic capacitor on the analog supply (AVDD). Brown-out Reset is internally set; do not disable it as the Watchdog Timer may not recover from a noisy VDD event.
Route the oscillator circuit (crystal plus 22 pF load capacitors) within 5 mm of the OSC1/OSC2 pins. Keep high-current traces (motor drivers, relay coils) at least 5 mm away from the oscillator loop to prevent EMI injection. The 44-TQFP package has a center thermal pad; tie it to VSS for mechanical stability and improved thermal dissipation.
The ICSP pins RB6 (PGC) and RB7 (PGD) double as general-purpose I/O. If they are configured as outputs by firmware, in-circuit programming is impossible. Reserve these pins as inputs, or accept that production programming requires sockets. The MCLR pin must be pulled high via a 10 kohm resistor; do not leave it floating as the device will randomly reset.
Compliance Information
RoHS and lead-free compliant per Microchip product page. Not AEC-Q100 qualified; for automotive applications, use PIC16F variants with automotive-grade qualification.