PIC32MK0512MCF100-E/PT - 120MHz 512KB Motor Control MCU | Microchip
MPN: PIC32MK0512MCF100-E/PT ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $9.45 | $9.45 |
| 10 | $8.85 | $88.50 |
| 100 | $7.95 | $795.00 |
| 500 | $7.1 | $3,550.00 |
| 1,000 | $6.42 | $6,420.00 |
PIC32MK0512MCF100-E/PT Overview
What is a motor-control MCU? A motor-control microcontroller is a class of embedded processor that combines a deterministic CPU core with high-resolution PWM timers, fast ADCs for current/voltage sensing, dedicated op-amps for signal conditioning, and communication peripherals (CAN-FD, I2C, SPI, UART) required to drive and supervise brushless DC, stepper, or permanent-magnet synchronous motors. Within the broader power management and industrial hierarchy, the PIC32MK sits alongside other 32-bit motor-control families such as the C2000 from Texas Instruments and the STM32F/G series from STMicroelectronics.
Key differentiating features include seven 12-bit 3.75 MSPS ADC cores capable of supporting up to 42 analog inputs, four on-chip operational amplifiers, five analog comparators, dedicated motor-control PWM peripherals, dual CAN-FD modules, USB-FS, four I2C, six I2S, and dual-panel Flash with Live Update support. The FPU + DSP pipeline executes 154 DMIPS and supports saturating and fractional arithmetic, single-cycle MAC, and four 64-bit accumulators, enabling real-time field-oriented control (FOC) loops without offloading.
The PIC32MK0512MCF100-E/PT supports field-oriented control (FOC) of PMSM/BLDC motors, multi-axis CNC machine control, digital power conversion (solar inverters, SMPS), Industrial IoT edge nodes with CAN-FD, and automotive body/battery management. The dual-panel Flash allows firmware live-update without service interruption - valuable for industrial drives where downtime is costly. Note the -E temperature grade (extended -40C to +125C) and AEC-Q100 qualification distinguish this part from the lower-grade PIC32MK0512MCF100-I/PT. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Drop-in alternatives for PIC32MK0512MCF100-E/PT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC32MK0512MCF100-E/PT (same form factor and footprint) — differing in ADC, Operating Temperature, Core Architecture, SRAM, Package.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
PIC32MK0512MCM100-I/PT
✅ Drop-In✓ In Stock
$5.85 / Unit
View Datasheet →PIC32MK0512MCM100-E/PT
✅ Drop-In✓ In Stock
$7.3 / Unit
View Datasheet →PIC32MK0512GPK100-E/PT
✅ Drop-In✓ In Stock
$6.3 / Unit
View Datasheet →PIC32MK0512MCF100-I/PT
✅ Drop-In✓ In Stock
$7.78 / Unit
View Datasheet →PIC32MK0512GPE100T-E/PT
✅ Drop-In✓ In Stock
$5.74 / Unit
View Datasheet →PIC32MK0512GPE100-I/PT
✅ Drop-In✓ In Stock
$2.74 / Unit
View Datasheet →PIC32MK0512MCF100-E/PT Maximum Ratings & Electrical Characteristics
| Core Architecture | MIPS32 microAptiv with FPU and DSP |
| Maximum CPU Frequency | 120 MHz |
| DMIPS Performance | 154 DMIPS |
| Flash Memory | 512 KB |
| SRAM | 256 KB |
| EEPROM | 4 KB |
| Supply Voltage | 2.2 V to 3.6 V |
| Operating Temperature | -40C to +125C (E grade) |
| ADC | 7x 12-bit, 3.75 MSPS, up to 42 analog inputs |
| Op-Amps | 4 on-chip operational amplifiers |
| Comparators | 5 analog comparators |
| CAN-FD Modules | 2 |
| USB | USB Full-Speed |
| I2C | 4 |
| I2S | 6 |
| Package | 100-pin TQFP (PT), 12x12 mm |
| AEC-Q100 Qualification | Yes (automotive grade) |
| RoHS Status | Compliant |
PIC32MK0512MCF100-E/PT 100-pin tqfp (pt), 12x12 mm Pin Configuration Guide
Pin configuration for PIC32MK0512MCF100-E/PT (100-pin tqfp (pt), 12x12 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for PIC32MK0512MCF100-E/PT.
Refer to the datasheet for full pin configuration.
Typical Applications
PIC32MK0512MCF100-E/PT is suitable for 6 applications: PMSM / BLDC Motor Field-Oriented Control (FOC), Solar Inverter and Digital Power Conversion, Industrial CAN-FD Gateway and IIoT Edge Node, Automotive Body and Battery Management Systems, Multi-Axis CNC Machine and Robotics Control, Medical Diagnostic and Laboratory Equipment.
PMSM / BLDC Motor Field-Oriented Control (FOC)
The PIC32MK0512MCF100-E/PT is purpose-built for field-oriented control of PMSM and BLDC motors. The 120 MHz MIPS32 microAptiv core with FPU executes FOC loops (Clarke/Park transforms, PI current controllers, SVPWM modulation) within microseconds, while seven 12-bit 3.75 MSPS ADC cores allow two or three simultaneous shunt current samples per PWM cycle without CPU intervention. The four integrated op-amps amplify shunt-resistor signals directly on-chip, eliminating external conditioning amplifiers and reducing BOM cost by $1-2 per axis. Five comparators provide hardware over-current protection with sub-microsecond fault response, critical for short-circuit detection in IGBT/MOSFET half-bridges. This integration lets a 3-phase FOC drive fit in a 50x50 mm PCB.
Recommended
Solar Inverter and Digital Power Conversion
Digital power conversion topologies (solar inverters, telecom SMPS, UPS systems) require deterministic PWM and fast ADC sampling for voltage-mode and current-mode control loops. The PIC32MK0512MCF100-E/PT's dedicated motor-control PWM peripherals support complementary outputs with programmable dead-time, suitable for full-bridge and interleaved PFC stages. The high-resolution PWM and 3.75 MSPS ADC enable >50 kHz switching frequency control with adequate feedback resolution. Dual-panel Flash with Live Update allows in-field firmware updates without inverter shutdown - critical for grid-tied solar installations where downtime equals lost revenue. AEC-Q100 qualification supports outdoor and automotive power-conversion environments.
Recommended
Industrial CAN-FD Gateway and IIoT Edge Node
Industrial IoT edge nodes aggregate sensor data and bridge CAN-FD buses to Ethernet/USB hosts. The PIC32MK0512MCF100-E/PT's two CAN-FD modules (compliant with ISO 11898-1:2015) support up to 5 Mbps payload rates, allowing modern CAN-FD sensor clusters to be aggregated without external controllers. USB Full-Speed connectivity enables direct tethering to a host PC or industrial gateway for configuration and telemetry. The 256 KB SRAM buffers time-series data for batch transmission over the CAN-FD bus. Industrial grade (-40C to +125C) operation is suitable for factory-floor enclosures. Dual-panel Live Update lets firmware upgrades run during scheduled maintenance windows without controller reset.
Recommended
Automotive Body and Battery Management Systems
Automotive body controllers and battery management systems (BMS) need AEC-Q100 qualified microcontrollers with robust communication, ADC accuracy, and temperature tolerance. The PIC32MK0512MCF100-E/PT meets AEC-Q100 Grade 1 with -40C to +125C operation. Seven 12-bit ADC cores monitor multiple cell voltages and temperatures in lithium battery packs, while CAN-FD transports battery state-of-charge data to the vehicle ECU. The 4 KB EEPROM stores cell-balancing parameters and lifetime data that must persist across power cycles. USB-FS supports service-tool diagnostics during dealer maintenance without requiring a separate gateway IC.
Recommended
Multi-Axis CNC Machine and Robotics Control
Multi-axis CNC machines and industrial robots require coordinated control of multiple stepper or servo motors. The PIC32MK0512MCF100-E/PT's dedicated PWM channels can drive 4-6 axes simultaneously, while the seven ADC cores sample position feedback from each axis with deterministic latency. The 154 DMIPS MIPS32 core handles G-code parsing and trajectory planning while leaving headroom for closed-loop PID. USB-FS allows real-time G-code streaming from a host PC, and dual CAN-FD provides connectivity to servo amplifiers in distributed architectures. Industrial temperature grade and AEC-Q100 qualification support factory-floor environments.
Recommended
Medical Diagnostic and Laboratory Equipment
Medical diagnostic devices (centrifuges, infusion pumps, sample handlers) need deterministic motor control, precise analog measurement, and long-term reliability. The PIC32MK0512MCF100-E/PT's 12-bit ADC cores sample optical density, flow rate, or motor position with high noise immunity; the FPU executes real-time control loops. Dual-panel Flash supports IEC 62304-compliant in-field firmware updates with traceable revision history. AEC-Q100 (not IEC 60601 medical-grade) provides high-quality silicon screening for non-life-support applications. USB-FS allows direct PC connectivity for data logging. Note: life-support devices require additional IEC 60601 certification at the system level - the MCU alone is not sufficient.
Recommended
Recommended Products Summary
Engineering reference data for PIC32MK0512MCF100-E/PT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC32MK0512MCM100-I/PT | PIC32MK0512MCM100-E/PT | PIC32MK0512GPK100-E/PT | PIC32MK0512MCF100-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same |
| Core | MIPS32 microAptiv, 120 MHz | MIPS32 microAptiv, 120 MHz | MIPS32 microAptiv, 120 MHz | MIPS32 microAptiv, 120 MHz | MIPS32 microAptiv, 120 MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +125C (E grade) | -40C to +85C (I grade) |
| On-chip Op-Amps | 4 | 0-4 (variant dependent) | 0-4 (variant dependent) | 0 (GP sub-family) | 4 |
| AEC-Q100 | Yes | No (industrial) | Yes | Yes | No (industrial) |
| Sub-Family | MC (Motor Control) | MC | MC | GP (General Purpose) | MC (Motor Control) |
Key Differentiators
- Highest analog integration in PIC32MK family (vs PIC32MK0512GPK100-E/PT)
- Seven 3.75 MSPS ADC cores vs typical MCU 1 MSPS (vs STM32F407VG (cross-family reference))
- Dual-panel Flash with Live Update (vs PIC32MK0512MCM100-E/PT)
Design Notes
The PIC32MK0512MCF100-E/PT requires two power rails: VDD (2.2-3.6 V) for I/O and VDDCORE (1.2 V internally regulated) for the core. Place 10 uF + 0.1 uF ceramic decoupling capacitors as close as possible to each VDD/VSS pair (pins 8, 19, 33, 43, 56, 69, 81, 91). Add a ferrite bead on VDD if the analog ADC reference is shared with the digital supply to suppress digital switching noise. The internal LDO can supply up to 60 mA to the core; if the application drives heavy GPIO loads, ensure total VDD current stays within the package dissipation limit of approximately 1 W.
Route analog and digital grounds as separate planes joined at a single point under the MCU's AGND pin. The seven ADC cores are sensitive to ground bounce; keep shunt-resistor traces short and away from PWM signal edges. Use 4-layer PCB with continuous ground plane beneath the MCU to dissipate the ~0.5-1 W typical power and provide ADC reference shielding. The 100-pin TQFP package has 0.4 mm lead pitch - use 0.2 mm via-in-pad or dog-bone fan-out for clean signal routing to inner layers.
Common pitfalls: (a) Do not exceed 3.6 V on any VDD pin - the PIC32MK lacks 5 V tolerance on most GPIOs; (b) Configure all unused pins as digital outputs (not inputs) to minimize current draw and ADC noise coupling; (c) The 4 KB EEPROM has a write endurance of 100K cycles - use wear-leveling for frequently updated parameters; (d) The dual-panel Flash Live Update requires both panels to contain valid firmware before swap - a failed update can leave the device in bootloader mode; (e) The seven ADC cores share a common reference voltage - sample rate mismatch between cores can cause cross-coupling.
Estimated: at full CPU load (120 MHz, all peripherals active, all GPIO toggling), the PIC32MK0512MCF100-E/PT dissipates approximately 0.6-1.0 W. With TQFP-100 theta_JA of approximately 50 C/W on a 4-layer PCB, this yields a junction temperature rise of 30-50 C above ambient. For continuous operation at +85 C ambient, junction temperature stays below +125 C. At +125 C ambient (E grade max), the MCU can still operate but requires reduced clock speed or peripheral count to maintain reliability. Place thermal vias under the exposed pad (if present) for additional heatsinking margin.
Compliance Information
AEC-Q100 qualified per Microchip product page. RoHS and REACH compliant. Conflict-minerals declaration available from Microchip. Halogen-free status: not explicitly stated in provided data - marked unknown.
