PIC32MZ2064DAB288-I/4J - 200MHz 32-Bit MCU, 2MB Flash, LFBGA-288 | Microchip
MPN: PIC32MZ2064DAB288-I/4J ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $14.85 | $14.85 |
| 10 | $13.55 | $135.50 |
| 100 | $11.95 | $1,195.00 |
| 500 | $10.45 | $5,225.00 |
| 1,000 | $9.2 | $9,200.00 |
PIC32MZ2064DAB288-I/4J Overview
A microcontroller (MCU) is a single integrated semiconductor device that combines a processor, memory (Flash and SRAM), and programmable I/O peripherals on one die. The PIC32MZ DA family occupies the high-performance tier of 32-bit MCUs, above Cortex-M4 class devices and approaching application processor territory, specifically by embedding a Graphics Processing Unit (GPU) and external DRAM interface that are normally only found on application processors.
Key features of the PIC32MZ2064DAB288-I/4J include: 2 MB on-chip program Flash (2M x 8), 640 KB SRAM, integrated DDR2 DRAM controller supporting up to 32 MB or 128 MB external addressable DDR2, hardware Graphics Controller with GPU for accelerated display rendering, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, Hi-Speed USB 2.0 with integrated PHY, two CAN 2.0b modules, up to 120 general-purpose I/O pins, an operating voltage range of 1.7 V to 3.6 V, and an industrial operating temperature grade of -40 C to +85 C.
The MIPS32 microAptiv core uses a 5-stage pipeline with DSP extensions and a single-cycle MAC unit, delivering 1.79 DMIPS / MHz or roughly 362 DMIPS at 200 MHz. The integrated Graphics Controller supports TFT LCD panels with parallel RGB, and the Graphics Processor offloads rendering of fonts, sprites, alpha blending, color conversion, and JPEG decode so the CPU is free for application logic. The DDR2 DRAM controller (16-bit interface, up to 200 MHz) provides the large framebuffer bandwidth demanded by QVGA and VGA-class displays.
Typical applications include graphical human-machine interface (HMI) panels for industrial automation, medical patient monitors with color TFT LCD, automotive infotainment displays, point-of-sale terminals, smart-home control panels, and any embedded GUI with animated icons, alpha blending, or large frame buffers. The combination of on-chip 2 MB Flash, 640 KB SRAM, and DDR2 expansion gives designers headroom for full graphical stacks (e.g. emWin, Microchip Graphics Library) plus application code.
Designers should route DDR2 traces as 50 ohm microstrip with matched length within 0.10 inch, place 0.1 uF + 10 uF decoupling on every VDD/VBAT pin, and provide four-layer PCB with a stitched ground plane beneath the LFBGA. The LFBGA-288 requires via-in-pad or via-near-pad PCB technology and X-ray inspection on production boards.
This page synthesizes distributor pricing across DigiKey, LCSC, JLCPCB and Microchip Direct, pin-compatible same-footprint LFBGA-288 alternatives, and practical PCB design notes not found in the manufacturer datasheet alone.
Drop-in alternatives for PIC32MZ2064DAB288-I/4J — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC32MZ2064DAB288-I/4J (same form factor and footprint) — differing in CAN, Graphics Controller, USB, External Memory Interface, ADC.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
PIC32MZ2064DAA288-I/4J
✅ Drop-In✓ In Stock
$7.99 / Unit
View Datasheet →PIC32MZ2025DAB288T-I/4J
✅ Drop-In✓ In Stock
$15.45 / Unit
View Datasheet →PIC32MZ2025DAA288-I/4J
✅ Drop-In✓ In Stock
$12.1 / Unit
View Datasheet →PIC32MZ1064DAA288-I/4J
✅ Drop-In✓ In Stock
$10.2 / Unit
View Datasheet →PIC32MZ2064DAB288T-I/4J
✅ Drop-In✓ In Stock
$7.95 / Unit
View Datasheet →PIC32MZ2064DAB288-I/4J Maximum Ratings & Electrical Characteristics
| Core Architecture | MIPS32 microAptiv |
| Core Count | Single-core |
| Data Bus Width | 32-bit |
| Maximum CPU Clock | 200 MHz |
| Program Memory (Flash) | 2 MB (2M x 8) |
| SRAM | 640 KB |
| External Memory Interface | DDR2 DRAM controller (up to 32 MB or 128 MB addressable) |
| Graphics Controller | Integrated, with dedicated Graphics Processor (GPU) |
| ADC | 12-bit, 18 MSPS, up to 45 analog inputs |
| Supply Voltage | 1.7 V to 3.6 V |
| Operating Temperature | -40 C to +85 C (Industrial) |
| I/O Pins | 120 |
| USB | Hi-Speed USB 2.0 with integrated PHY |
| CAN | 2x CAN 2.0b |
| Package | 288-LFBGA (15x15 mm) |
| Mounting Type | Surface Mount (BGA) |
| RoHS Status | Compliant |
| Temperature Grade | Industrial (-I) |
PIC32MZ2064DAB288-I/4J 288-lfbga (15x15 mm) Pin Configuration Guide
Pin configuration for PIC32MZ2064DAB288-I/4J (288-lfbga (15x15 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for PIC32MZ2064DAB288-I/4J.
Refer to the datasheet for full pin configuration.
Typical Applications
PIC32MZ2064DAB288-I/4J is suitable for 6 applications: Industrial HMI Panels with TFT LCD, Medical Patient Monitors, Automotive Infotainment Displays, Point-of-Sale (POS) Terminals, Smart Home Control Panels, Test & Measurement Instrumentation.
Industrial HMI Panels with TFT LCD
The PIC32MZ2064DAB288-I/4J is engineered for industrial human-machine interface (HMI) panels driving color TFT LCDs from QVGA (3.28 inch) up to VGA (7 inch and larger). The integrated Graphics Controller with dedicated Graphics Processor handles font rendering, sprite blits, alpha blending, and JPEG decode offloaded from the CPU, while the DDR2 controller provides large framebuffer bandwidth for animated icons. The 200 MHz microAptiv core runs the application logic and the on-chip 2 MB program Flash and 640 KB SRAM hold the GUI library plus application code. Designers can pair it with the Microchip Graphics Library (meb) or emWin for rapid GUI development. The 12-bit 18 MSPS ADC with up to 45 channels aggregates analog sensor inputs (temperature, pressure, potentiometers) on the same MCU that drives the display, reducing BOM and PCB area.
Recommended
Medical Patient Monitors
Medical patient monitors require a quiet, clean display to show vital-sign waveforms (ECG, SpO2 plethysmograph, respiration) and numeric trends alongside a touchscreen interface for clinician interaction. The PIC32MZ2064DAB288-I/4J delivers the necessary performance: 200 MHz MIPS32 microAptiv core for waveform DSP, 2 MB Flash and 640 KB SRAM to hold the GUI stack and waveform history, the integrated Graphics Controller for fast pan/zoom rendering, and Hi-Speed USB 2.0 with integrated PHY to enumerate as a USB device when docked at a bedside station. The 45-channel 12-bit ADC aggregates multiple analog sensor inputs (NIBP cuff pressure, temperature thermistor bridges, galvanic skin response). Industrial -40 to +85 C temperature grade supports deployment in operating rooms and ambulance environments. Pair with the PIC32MZ Graphics Library plus emWin or TouchGFX for touchscreen integration.
Recommended
Automotive Infotainment Displays
Automotive infotainment secondary displays (climate control, headlight status, drive mode selectors, rear-seat entertainment) increasingly demand color TFT LCD panels with animated icons and brand-specific HMI styling. The PIC32MZ2064DAB288-I/4J's integrated Graphics Controller and Graphics Processor are optimized for exactly this use case, freeing MIPS resources for CAN bus traffic, LIN slaves, and A-bus audio routing. The two integrated CAN 2.0b controllers handle vehicle network connectivity at 1 Mbit/s, while the Hi-Speed USB 2.0 with integrated PHY provides media streaming or Apple CarPlay/Android Auto hand-off support. The DDR2 controller connects to external 32 MB or 128 MB DDR2 for large framebuffers needed by 7-10 inch automotive displays. The 1.7-3.6 V supply range matches automotive 3.3 V rails with cold-crank tolerance. Note: for AEC-Q100 qualified automotive grade, designers should validate against the specific Microchip automotive part number rather than the -I/4J industrial grade suffix.
Recommended
Point-of-Sale (POS) Terminals
Point-of-sale terminals combine a color touchscreen for cashier interaction, a thermal receipt printer, magnetic stripe or NFC contactless reader, Ethernet for transaction backhaul, and USB peripherals (barcode scanner, cash drawer). The PIC32MZ2064DAB288-I/4J drives the touch LCD panel via the integrated Graphics Controller, communicates with peripherals over Hi-Speed USB 2.0 with integrated PHY, and routes data over Ethernet or 4G modem through expansion interfaces. The 12-bit ADC and 45 analog channels monitor battery state and external sensors. Industrial temperature grade (-40 to +85 C) supports deployment in unconditioned retail back rooms. The on-chip 2 MB Flash holds the GUI plus POS application state machine, while 640 KB SRAM provides buffer space for transaction queues. Designers can pair with a secure element coprocessor for EMV/PIN transactions.
Recommended
Smart Home Control Panels
Wall-mounted smart home control panels combine a color TFT touchscreen (typically 4-7 inch) for HVAC, lighting, security camera viewing, and intercom control. The PIC32MZ2064DAB288-I/4J drives the LCD through its integrated Graphics Controller with GPU acceleration for animated transitions, and routes network traffic over Hi-Sub USB (USB Ethernet dongle) or expansion WiFi/BLE modules. The 2 MB program Flash stores the GUI plus multi-vendor device drivers, while the 640 KB SRAM provides headroom for camera frame buffering. The industrial temperature grade supports indoor and outdoor panel installation. The DDR2 controller enables large framebuffers for camera PIP (picture-in-picture) overlays. Designers can integrate the Microchip Graphics Library plus a TCP/IP stack such as lwIP for camera streaming.
Recommended
Test & Measurement Instrumentation
Bench instruments (oscilloscopes, signal generators, logic analyzers, spectrum analyzers) require a fast color display to render waveforms, FFT spectra, and menus with high refresh rates. The PIC32MZ2064DAB288-I/4J's 200 MHz microAptiv core captures and processes waveforms, the integrated Graphics Controller renders the trace display at 60 fps, and the 45-channel 12-bit 18 MSPS ADC aggregates analog front-end channels. The 2 MB Flash holds the GUI plus DSP algorithms, and 640 KB SRAM provides circular waveform buffer headroom. The two CAN 2.0b controllers and Hi-Speed USB 2.0 handle instrument-to-host PC connectivity. The DDR2 controller enables large deep-memory captures rendered with smooth pan/zoom. Industrial temperature grade supports lab and field deployment.
Recommended
Recommended Products Summary
Engineering reference data for PIC32MZ2064DAB288-I/4J — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC32MZ2064DAA288-I/4J | PIC32MZ2025DAB288T-I/4J | PIC32MZ2025DAA288-I/4J | PIC32MZ1064DAA288-I/4J | PIC32MZ2064DAB288T-I/4J |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 288-LFBGA (15x15 mm) | 288-LFBGA (15x15) - same | 288-LFBGA (15x15) - same | 288-LFBGA (15x15) - same | 288-LFBGA (15x15) - same | 288-LFBGA (15x15) - same |
| Core | MIPS32 microAptiv, 32-bit, single-core | MIPS32 microAptiv, 32-bit, single-core | MIPS32 microAptiv, 32-bit, single-core | MIPS32 microAptiv, 32-bit, single-core | MIPS32 microAptiv, 32-bit, single-core | MIPS32 microAptiv, 32-bit, single-core |
| Maximum CPU Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Flash | 2 MB | 2 MB | 2 MB | 2 MB | 1 MB (-50%) | 2 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Supply Voltage | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
Key Differentiators
- Only 288-ball LFBGA variant with full 2 MB Flash + 640 KB SRAM + 200 MHz + integrated DDR2 + integrated GPU (vs PIC32MZ1064DAA288-I/4J)
- Industrial -40 to +85 C temperature grade with full 200 MHz operation (vs PIC32MZ2025DAB288T-I/4J)
- Drop-in compatible with the variant A PIC32MZ2064DAA288-I/4J for sourcing flexibility (vs PIC32MZ2064DAA288-I/4J)
Design Notes
The 288-LFBGA package requires via-in-pad or via-near-pad PCB technology. Use 0.4 mm ball pitch with 0.25 mm via diameter and 0.5 mm pad diameter per Microchip LFBGA-288 footprint recommendation. A stitched ground plane directly beneath the BGA provides a low-impedance return path for DDR2 and 200 MHz signals; route DDR2 as 50 ohm microstrip with length-matched traces within 0.10 inch to maintain signal integrity.
Decouple every VDD/VBAT/VBUS pin pair with a 0.1 uF ceramic in parallel with a 10 uF ceramic placed as close to the pin as possible. The DDR2 interface rail (VDD2DDR) requires additional bulk capacitance per the PIC32MZ DA datasheet - typically 47 uF tantalum + 10 uF ceramic. Hold the nRESET line low during power-up until VDD reaches 1.7 V to guarantee clean startup of the integrated Graphics Controller and DDR2 controller.
Estimated: at full 200 MHz with the integrated DDR2 controller active and the Graphics Controller running, the PIC32MZ2064DAB288-I/4J consumes approximately 500-700 mW. With 288-LFBGA thermal resistance theta_JA around 25 C/W on a 4-layer PCB, junction-to-ambient rise is approximately 12-17 C - well within industrial -40 to +85 C limits. Provide a continuous ground plane beneath the BGA for spreading; no external heatsink is required at typical GUI workloads.
Do not assume DDR2 trace length matching is optional - the 16-bit DDR2 controller runs at up to 200 MHz and requires byte-lane length matching within 0.10 inch. Place the external DDR2 chip on the same PCB side as the MCU within 25 mm routing length. Failure to observe DDR2 layout guidelines is the most common cause of boot failure on PIC32MZ DA designs - review the DDR2 layout checklist in the family datasheet before tape-out.
Compliance Information
RoHS compliant per Microchip product page. Industrial -40 to +85 C temperature grade. Not AEC-Q100 qualified - for AEC-Q100 automotive grade, check the corresponding -VAO or -AEC suffix variant. Lead-free and halogen-free per Microchip PIC32MZ DA family environmental compliance.