Renesas Electronics

R5F10PMELFB#X5 - Low-Power 16-Bit MCU | Renesas

MPN: R5F10PMELFB#X5 ✓ Active
LFQFP Package 48 KB to 256 KB Memory
MOQ: 1 |

R5F10PMELFB#X5 Overview

Renesas Electronics R5F10PMELFB#X5 is a low-consumption 16-bit microcontroller in the RL78/F14 family, configured for automotive applications with built-in CAN and LIN communications and BLDC motor-control support. The RL78/F14 family covers 30- to 100-pin configurations with 48- to 256-KB flash options, and it is positioned above the RL78/F13 series for automotive electronic control units, body-domain controllers, and sensor-node designs.

An RL78 microcontroller is a 16-bit flash-based embedded-control device designed around the Renesas RL78 core architecture. It belongs to the broader hierarchy of 8-bit and 16-bit microcontrollers, embedded processors, and semiconductor control devices. Compared with general-purpose microprocessors, an RL78 device combines a compact instruction set, event-driven peripherals, fast wake-up behavior, and low standby consumption for systems that must respond quickly while minimizing battery or vehicle-ignition energy use.

The R5F10PMELFB#X5 integrates a CAN module and a LIN module for automotive network connectivity. These interfaces support communication with body electronics, climate-control modules, seat and door controllers, lighting systems, and other distributed vehicle nodes. The family also supports brushless DC motor control through dedicated timer, comparator, and functional-safety resources, making it relevant to compact electric actuators and small motor-control subsystems.

Renesas positions the RL78/F14 as the upper-level member of the RL78 series, building on the RL78/F13 with additional automotive interface and motor-control capabilities. Its low-consumption design is aimed at systems that spend substantial time between short active-processing intervals. Peripheral timing and low-power behavior must therefore be evaluated together when designing wake-up latency and standby budgets.

Typical uses include automotive climate-control units, motor-driven valves and pumps, door and seat control modules, sensor interfaces, body control nodes, and compact electric actuators. A CAN-linked actuator controller can use the integrated communications interface while the timer and comparator resources support commutation, current detection, and protection functions.

For PCB implementation, confirm the exact pin assignments, package dimensions, exposed-pad requirements, and decoupling recommendations in the Renesas manufacturer datasheet for this ordering code. Treat the LFQFP land pattern as a controlled assembly item and validate the pin-to-pin assignment of every peripheral before routing CAN, LIN, motor-drive, and debug signals.

This page combines the RL78/F14 family capabilities with practical guidance on automotive interfacing, motor-control resources, low-power design, and package handling. It also identifies same-package drop-in candidates so engineers can assess replacement options without changing the PCB footprint.

Drop-in alternatives for R5F10PMELFB#X5 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

R5F10PMELFB#V5

✅ Drop-In
📦 LFQFP
Same R5F10PME LFB package and family structure; suffix V5 differs from X5, so grade and configuration must be verified before substitution.

📋 Reference alternative (not in catalog)

R5F10BMELFB#X5

✅ Drop-In
📦 LFQFP
Same RL78/F14 LFB package structure; R5F10B family code may change flash density or device configuration, requiring an exact resource comparison.

📋 Reference alternative (not in catalog)

R5F10PMEKFB#X5

✅ Drop-In
📦 LFQFP
Same R5F10PME family and KFB package suffix; grade, temperature, or configuration differences must be confirmed in the manufacturer datasheet.

📋 Reference alternative (not in catalog)

R5F10PMGKFB

✅ Drop-In
📦 LFQFP
Same RL78/F14 family family naming and KFB package suffix; the G code can change device density or qualification, so software and pin compatibility require verification.

📋 Reference alternative (not in catalog)

R5F10PMELFB#X5 Maximum Ratings & Electrical Characteristics

Manufacturer Renesas Electronics
Series RL78/F14
Device Type 16-bit Flash Microcontroller
Core Architecture Renesas RL78 core
Application Focus Automotive
Family Flash Memory Range 48 KB to 256 KB
Family Pin Count Range 30 pins to 100 pins
CAN Interface Yes, built-in CAN module
LIN Interface Yes, built-in LIN module
BLDC Motor Control Support Yes
Package LFQFP
Mounting Type Surface Mount
Power Consumption Class Low-consumption MCU

R5F10PMELFB#X5 lfqfp Pin Configuration Guide

Pin configuration for R5F10PMELFB#X5 (lfqfp package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

lfqfp package pinout diagram for R5F10PMELFB#X5

No detailed pinout data available for R5F10PMELFB#X5.

Refer to the datasheet for full pin configuration.

Typical Applications

R5F10PMELFB#X5 is suitable for 6 applications: Automotive Climate-Control Module, Small BLDC Electric Actuator Controller, Automotive Door and Seat Control Module, Body Sensor Node with LIN Communication, Low-Power Automotive ECU with Wake-Up Control, Compact Motor-Control Subsystem.

🚗

Automotive Climate-Control Module

The R5F10PMELFB#X5 fits an electronic climate-control module that must coordinate sensors, actuators, and body-network traffic within a low-consumption automotive node. Its RL78/F14 foundation combines a 16-bit core with built-in CAN and LIN modules, allowing CAN traffic to carry higher-rate control information while LIN serves simpler distributed accessories. Low-consumption operation is valuable because these modules may remain connected to the vehicle bus without continuously running the CPU. Use the CAN and LIN transceivers appropriate to the bus topology, keep sensitive analog channels away from switching nodes, and validate wake-up behavior and bus standby-current limits against the vehicle's energy budget.

🏭

Small BLDC Electric Actuator Controller

The R5F10PMELFB#X5 is appropriate for a compact brushless DC actuator because the RL78/F14 family provides timer, comparator, and functional-safety resources for motor commutation and current detection. The controller can receive commands over CAN or LIN, decide when to energize the motor phases, and monitor a protected actuator through an external power stage. Low-consumption operation helps reduce standby energy in valve, pump, and latch mechanisms. Design the gate-drive and current-sense paths separately from the MCU, verify electrical limits for the motor and ambient temperature, and test stall, short-circuit, and open-load protection before connecting the actuator to the vehicle network.

🚗

Automotive Door and Seat Control Module

The R5F10PMELFB#X5 can serve as the local controller in a door, seat, or latch module that reacts to switch inputs and drives motors or solenoids through external drivers. Built-in CAN and LIN connectivity supports centralized vehicle control while reducing the wiring needed for distributed functions. The RL78 core provides deterministic 16-bit processing for motor-position logic, while the family's low-consumption characteristics suit modules that must remain connected but idle for long periods. Confirm the exact timer channels and comparator assignments in the manufacturer pin table, add local protection for inductive loads, and validate that the module's sleep currents meet the vehicle specification.

🧩

Body Sensor Node with LIN Communication

The R5F10PMELFB#X5 is suited to a LIN-connected body sensor node that checks switches, ambient conditions, or a simple diagnostic element and reports status to a higher-level controller. The integrated LIN module reduces the peripheral count compared with a discrete implementation, while the 16-bit RL78 core provides enough computation for filtering, debouncing, diagnostics, and state management. Low-consumption operation is important for nodes that are permanently attached to the vehicle electrical system but rarely active. Select a LIN transceiver with the required voltage and temperature rating, follow the manufacturer's reference layout for bus routing, and implement wake-up and communication-error handling in firmware.

🔋

Low-Power Automotive ECU with Wake-Up Control

The R5F10PMELFB#X5 fits a low-power automotive electronic control unit that wakes periodically to sample inputs, update diagnostics, and exchange data over a vehicle network. The RL78/F14 family's low-consumption design supports duty-cycled operation rather than continuous execution, which can reduce standby energy in always-connected nodes. CAN and LIN interfaces allow the same controller to participate in different network layers. Establish the permitted sleep currents and maximum wake-up latency with the system requirements, then confirm the relevant peripheral clocks and wake-up sources in the manufacturer documentation. Avoid leaving unused inputs floating, and isolate bus transceivers so their sleep behavior matches the ECU power strategy.

⚡

Compact Motor-Control Subsystem

The R5F10PMELFB#X5 can act as the intelligent controller for a small motor subsystem that combines local command processing with vehicle-network communication. The RL78/F14 family's timer RD and comparator resources support commutation, duty-cycle measurement, and current-feedback interpretation, while CAN or LIN carries supervisory commands. Because the MCU does not directly replace the power stage, the external MOSFETs, gate driver, current shunt, and protection network must be designed for the motor's voltage and current ratings. Keep high-current switching loops compact, route sensitive feedback away from them, and validate stall and thermal conditions across the required ambient temperature range.

Recommended Products Summary

AT90CAN32-16AUR Microchip Technology Used in: Automotive Climate-Control Module, Small BLDC Electric Actuator Controller, Automotive Door and Seat Control Module, Low-Power Automotive ECU with Wake-Up Control, Compact Motor-Control Subsystem TJA1057GTK/3Z NXP Semiconductors Used in: Automotive Climate-Control Module, Body Sensor Node with LIN Communication R5F10PMELFB#V5 Related RL78/F14 automotive controller Used in: Small BLDC Electric Actuator Controller R5F10BMELFB#X5 Related RL78/F14 automotive MCU Used in: Automotive Door and Seat Control Module, Compact Motor-Control Subsystem R5F10PMGKFB Related RL78/F14 controller Used in: Body Sensor Node with LIN Communication R5F10PMEKFB#X5 Related low-consumption RL78/F14 MCU Used in: Low-Power Automotive ECU with Wake-Up Control
What is the R5F10PMELFB#X5?
The R5F10PMELFB#X5 is a Renesas RL78/F14 16-bit flash microcontroller intended for automotive electronic-control applications. The device belongs to a family with 30- to 100-pin options, 48- to 256-KB flash configurations, low-consumption operation, an integrated CAN module, an integrated LIN module, and BLDC motor-control support. It is supplied in an LFQFP surface-mount package.
Which automotive interfaces does the R5F10PMELFB#X5 support?
The R5F10PMELFB#X5 supports both CAN and LIN through built-in modules in the RL78/F14 family. CAN is suited to higher-bandwidth communication between body, climate, and motor-control nodes, while LIN is commonly used for simpler sensors and actuators. Confirm transceiver requirements, bus timing settings, and termination details in the manufacturer datasheet for the selected ordering code.
Can the R5F10PMELFB#X5 control a brushless DC motor?
Yes, the RL78/F14 family supports brushless DC motor control, and the R5F10PMELFB#X5 is positioned for automotive applications where compact motor-drive functions are required. The family includes timer RD, comparator, and functional-safety resources that support commutation, current sensing, and protection. The external power stage, gate drivers, and motor-specific protection remain the designer's responsibility.
What is the difference between the RL78/F14 and RL78/F13 series?
Renesas positions the RL78/F14 as the upper-level product within the RL78 series, above the RL78/F13. The RL78/F14 family adds automotive-focused integration, including built-in CAN and LIN modules and BLDC motor-control support, while retaining the low-consumption design concept of the RL78 family. Exact peripheral counts and memory sizes depend on the specific device ordering code.
Where can I download the R5F10PMELFB#X5 datasheet PDF?
The official R5F10PMELFB#X5 datasheet is available through the Renesas RL78/F14 part-details page at https://www.renesas.com/en/products/rl78-f14/part-details/r5f10pmelfb-x5. Use the manufacturer documentation to verify the LFQFP pin list, electrical limits, clock configuration, peripheral functions, memory map, and recommended application circuit before releasing a PCB design.
Where can I find the R5F10PMELFB#X5 pinout?
The authoritative pinout is the pin-description table in the Renesas manufacturer datasheet for the R5F10PMELFB#X5 ordering code. Because the LFQFP ordering suffix alone does not establish every peripheral assignment, assign PCB tracks directly from that table rather than from a generic RL78 diagram. Pay particular attention to power, ground, CAN, LIN, timer, comparator, and programming pins.
What is the best drop-in replacement for the R5F10PMELFB#X5?
The closest same-package candidates identified within the Renesas RL78/F14 naming family are R5F10PMELFB#V5, R5F10BMELFB#X5, R5F10PMEKFB#X5, and R5F10PMGKFB. Each candidate must be checked for exact flash, SRAM, temperature grade, peripheral set, and pin compatibility before substitution. Request a Quote on this page for the target ordering code and supply confirmation.
Can R5F10PMELFB#V5 replace R5F10PMELFB#X5?
R5F10PMELFB#V5 is the closest identified alternative because it retains the R5F10PME LFB ordering structure, but the suffix change can indicate a different ordering, grade, or configuration. It should be treated as a candidate rather than an automatic substitute. Verify the pin list, memory capacity, temperature rating, CAN and LIN resources, and software-device configuration in the manufacturer documentation.
What is the best Renesas equivalent for the R5F10PMELFB#X5?
R5F10BMELFB#X5 is the closest Renesas same-package alternative identified by ordering code, while R5F10PMEKFB#X5 and R5F10PMGKFB are additional RL78/F14 candidates. No confirmed drop-in selection can be made from the ordering suffix alone because memory density, temperature class, and peripheral differences may change. Compare the exact datasheet tables and qualification information before approving a substitution.
When should I choose the R5F10PMELFB#X5 instead of another RL78/F14 device?
Choose the R5F10PMELFB#X5 when the design needs an automotive-oriented RL78/F14 implementation with integrated CAN, integrated LIN, and BLDC motor-control capability in an LFQFP package. Choose another family member when flash density, SRAM, temperature grade, or a specific peripheral differs. The decision should be based on an exact resource and qualification comparison, not only the visible package code.
Is the R5F10PMELFB#X5 suitable for an automotive body-control module?
Yes, the R5F10PMELFB#X5 is suitable for automotive body-control functions that require low-consumption 16-bit control, CAN connectivity, and LIN connectivity. It can support distributed nodes such as climate-control units, door modules, sensor interfaces, and small electric actuators. Final suitability depends on the exact temperature grade, functional-safety documentation, EMC requirements, and qualification status for the target vehicle program.
Where can I buy the R5F10PMELFB#X5 online?
Use the Request a Quote form on this page to ask for the R5F10PMELFB#X5 with the exact ordering code and required quantity. The form is the appropriate channel for confirming current commercial availability, lot consistency, and delivery scheduling. Engineers should specify the LFQFP package and the suffix X5 exactly when submitting a sourcing request.
What is the price of the R5F10PMELFB#X5?
Current commercial pricing for the R5F10PMELFB#X5 is handled through the Request a Quote form on this page rather than through static price text. Submit the required quantity, target date, and shipment destination to obtain the current quotation. Quote requests should include the complete R5F10PMELFB#X5 ordering code to avoid ambiguity with related RL78/F14 variants.
What is the lead time for the R5F10PMELFB#X5?
The current lead time should be requested through the Request a Quote form on this page, together with your required quantity and target delivery date. Automotive microcontroller supply can vary with allocation status, lot traceability, and production scheduling. Do not assume a delivery commitment from general catalog information; confirm the schedule directly with the quote response.
What are the key specifications of the R5F10PMELFB#X5?
The key engineering characteristics of the R5F10PMELFB#X5 are its 16-bit Renesas RL78 core, low-consumption automotive positioning, LFQFP surface-mount package, and RL78/F14 family support for 48- to 256-KB flash configurations. The family also provides built-in CAN and LIN modules plus BLDC motor-control resources. Use the exact manufacturer datasheet to confirm this ordering code's memory, voltage, temperature, and pin-level ratings.

Engineering reference data for R5F10PMELFB#X5 — comparison, design guidance, and compliance information.

Selection Guide

Choose the R5F10PMELFB#X5 for an automotive electronic-control node that needs a 16-bit RL78/F14 controller, low-consumption behavior, integrated CAN and LIN, and possible BLDC motor-drive functions. Consider R5F10PMELFB#V5 first when its exact grade and configuration match the original design, but verify the suffix-dependent differences before changing devices. R5F10BMELFB#X5 may be suitable when the required flash density and peripheral map differ, while R5F10PMEKFB#X5 and R5F10PMGKFB are candidates only after their temperature, qualification, memory, and pin details have been checked. No cross-brand drop-in candidate is presented because a microcontroller substitution requires more than matching a package: the core instruction set, peripheral map, memory layout, electrical limits, functional-safety documentation, and software configuration must remain compatible.

Comparison with Alternatives

Parameter This Product R5F10PMELFB#V5 R5F10BMELFB#X5 R5F10PMEKFB#X5 R5F10PMGKFB
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package LFQFP LFQFP - same package family LFQFP - same package family LFQFP - same package family LFQFP - same package family
Series RL78/F14 RL78/F14 RL78/F14 RL78/F14 RL78/F14
CPU Architecture 16-bit Renesas RL78 core 16-bit Renesas RL78 core 16-bit Renesas RL78 core 16-bit Renesas RL78 core 16-bit Renesas RL78 core
CAN Interface Built-in CAN module Built-in CAN module Built-in CAN module Built-in CAN module Built-in CAN module
LIN Interface Built-in LIN module Built-in LIN module Built-in LIN module Built-in LIN module Built-in LIN module
BLDC Motor-Control Support Supported by RL78/F14 resources Supported by RL78/F14 resources Supported by RL78/F14 resources Supported by RL78/F14 resources Supported by RL78/F14 resources

Key Differentiators

  • Integration of vehicle-network interfaces (vs R5F10PMELFB#V5)
  • Automotive motor-control positioning (vs R5F10BMELFB#X5)
  • Low-consumption RL78/F14 family architecture (vs R5F10PMEKFB#X5)

Design Notes

Design the ECU around the RL78/F14 family's low-consumption capability rather than assuming continuous CPU activity. Define permitted standby and sleep currents at the module level, including CAN and LIN transceivers and any external sensors. Use the manufacturer power-consumption and wake-up tables to select stop modes and peripheral clock states. Confirm that every connected device can enter a defined low-power state without violating communication timeout or diagnostic requirements.

Place CAN and LIN routing away from motor-drive switching loops and high-current inductive outputs. Follow the Renesas reference layout for decoupling, clock-loop return paths, and transceiver placement. Keep the CAN differential pair continuous with matched routing, and route LIN as a controlled single-ended bus. Validate clearances against the vehicle electrical specification because an LFQFP controller may be mounted close to power-stage components on a compact module.

Do not treat every R5F10-prefixed device as a direct substitution. Ordering codes can encode differences in flash density, SRAM, temperature grade, qualification, or peripheral configuration even when the package appears identical. Before releasing a replacement, compare the pin-description table, memory map, electrical characteristics, clock settings, and device-configuration identifier. Also confirm that the original design does not rely on an automotive qualification feature that the alternative grade does not provide.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The device is identified for automotive applications, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer documentation or supplier certificates.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

R5F10PMELFB#X5 datasheet R5F10PMELFB#X5 specifications R5F10PMELFB#X5 pinout R5F10PMELFB#X5 equivalent R5F10PMELFB#X5 replacement R5F10PMELFB#X5 schematic Renesas R5F10PMELFB#X5 R5F10PMELFB#X5 price R5F10PMELFB#X5 stock RL78 F14 CAN LIN microcontroller R5F10PMELFB#X5 automotive MCU R5F10PMELFB#V5 vs R5F10PMELFB#X5 RL78 F14 BLDC motor control R5F10PMELFB#X5 LFQFP footprint R5F10PMELFB#X5 programming

Related Components & Terms

Renesas Electronics R5F10PMELFB#X5 R5F10PMELFB#V5 R5F10BMELFB#X5 R5F10PMEKFB#X5 R5F10PMGKFB RL78/F14 RL78/F13 RL78 core 16-bit microcontroller embedded microcontroller flash memory SRAM CAN module LIN module brushless DC motor control BLDC motor automotive electronic control unit low-consumption design wake-up control timer RD comparator functional safety LFQFP surface-mount package RoHS REACH AEC-Q100
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details