R5F113GLLFB#X5 - 16-Bit Automotive MCU | Renesas Electronics
MPN: R5F113GLLFB#X5 ✓ ActiveR5F113GLLFB#X5 Overview
An automotive microcontroller is a specialized semiconductor that integrates a CPU core, nonvolatile program memory, data memory, communication controllers, timers, analog interfaces, and I/O into a single device. The RL78/F15 belongs to the RL78 family of low-power 16-bit embedded controllers and is used to execute motor-control, body-electronics, and vehicle-network tasks. Its architecture prioritizes deterministic peripheral operation, efficient code execution, and low standby consumption in automotive systems.
Key features include enhanced CAN, LIN, and IEBus interfaces, a high-speed internal oscillator supporting 32 MHz CPU operation, and enhanced motor-control functionality using the Timer RD peripheral. The device also targets operation up to 125 °C with a 24 MHz CPU clock. A dedicated flash variant indicated by the product family naming supports applications that require on-chip program storage, while the 64-pin LQFP provides ample external interface access.
The RL78/F15 architecture is designed for automotive embedded control rather than general-purpose computing. Its communication peripherals allow the controller to participate in in-vehicle networks, while Timer RD supports repeatable motor and general-purpose timing functions. The family is designed for migration from RL78/F14, maintaining pin and software upward compatibility where applicable, which can simplify lifecycle and firmware-planning work for automotive platforms.
Typical applications include body-control modules, motor-control units, door and locking controllers, climate-control interfaces, lighting controllers, seat and access-system controllers, and other ECUs connected to CAN, LIN, or IEBus networks. Its combination of 32 MHz processing, dedicated automotive communication, and extended-temperature operation makes it appropriate for systems that require more connectivity and timing resources than a basic low-end 8-bit controller.
Designers should preserve the exact package pin assignment, oscillator configuration, and reset requirements when laying out an automotive PCB. The 64-pin LQFP footprint provides adequate routing flexibility for communication lines and external interfaces, but power, ground, and high-current motor-drive paths still require careful partitioning. Software and hardware validation should cover the operating-voltage limits and automotive qualification requirements listed for the exact ordering code.
This product page consolidates manufacturer positioning, package information, technical characteristics, sourcing questions, replacement guidance, and application-specific engineering context. It is designed to help engineers evaluate the R5F113GLLFB#X5 for automotive networking and embedded-control designs before beginning schematic, PCB, firmware, and qualification work.
Drop-in alternatives for R5F113GLLFB#X5 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with R5F113GLLFB#X5 (same form factor and footprint).
R5F113GLLFB#H5
✅ Drop-InContact for price
View Datasheet →R5F113GLKFB#X5
✅ Drop-In📋 Reference alternative (not in catalog)
R5F113LLLFB#X5
✅ Drop-In📋 Reference alternative (not in catalog)
R5F113GLLFB#X5 Maximum Ratings & Electrical Characteristics
| Product Type | 16-bit automotive microcontroller |
| Product Series | RL78/F15 |
| CPU Maximum Frequency | 32 MHz |
| Communications Interfaces | CAN, LIN, and IEBus |
| Motor-Control Timer | Enhanced Timer RD |
| Package | 64-pin LQFP |
| Mounting Type | Surface mount |
| Shipping Format | Tape and reel |
| Moisture Sensitivity Level | MSL 3 |
| Target Maximum Temperature | 125 °C at 24 MHz CPU clock |
| Automotive Qualification | Automotive application targeted |
R5F113GLLFB#X5 64-pin lqfp Pin Configuration Guide
Pin configuration for R5F113GLLFB#X5 (64-pin lqfp package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for R5F113GLLFB#X5.
Refer to the datasheet for full pin configuration.
Typical Applications
R5F113GLLFB#X5 is suitable for 6 applications: Automotive Body Control Module, Door and Locking Controller, Motor Control Module, Climate-Control Interface, Lighting Control Module, Seat and Access-System Controller.
Automotive Body Control Module
The R5F113GLLFB#X5 fits a body-control module because its RL78/F15 core executes at up to 32 MHz while enhanced CAN, LIN, and IEBus interfaces connect the module to vehicle networks. The 64-pin LQFP provides separate external signals for switches, lamps, locks, and diagnostic equipment. Its automotive positioning makes it suitable for coordinating distributed body functions, although the final design must account for load-dump protection, transient immunity, standby current, and exact qualification requirements.
Recommended
Door and Locking Controller
A door or locking controller can use the R5F113GLLFB#X5 to supervise switches, latch solenoids, indicators, and diagnostic communication. The 32 MHz RL78/F15 core provides timing margin for debouncing, state-machine control, and communications servicing, while LIN or IEBus connectivity supports distributed vehicle-networking arrangements. The 64-pin LQFP simplifies access to multiple inputs and outputs, but inductive loads still require separate driver and suppression circuits.
Recommended
Motor Control Module
The R5F113GLLFB#X5 is suitable for small automotive motor-control modules because Renesas highlights enhanced motor-control functionality using Timer RD. Its 32 MHz processing rate supports rapid control-loop execution, diagnostics, and communication handling, while CAN or LIN connects the controller to other vehicle systems. The MCU should operate alongside a dedicated gate driver and power stage, with external protection and current feedback selected for the motor and fault requirements.
Recommended
Climate-Control Interface
For a climate-control interface, the R5F113GLLFB#X5 can coordinate button inputs, display signals, blower commands, sensors, and vehicle-network data. The 16-bit RL78/F15 architecture provides efficient embedded processing, and CAN, LIN, and IEBus interfaces reduce the need for separate communication controllers. The 64-pin LQFP offers a practical balance of I/O and board area, while fan and thermal loads must be driven through suitable external transistor stages with appropriate protection.
Recommended
Lighting Control Module
The R5F113GLLFB#X5 can serve in an automotive lighting controller by combining deterministic control logic with CAN, LIN, or IEBus network communication. Its 32 MHz operating capability supports status monitoring, dimming algorithms, fault logging, and diagnostic messaging. The 64-pin LQFP makes multiple lamp outputs and inputs accessible, but LED drivers or relay drivers must be placed outside the MCU and selected for the automotive voltage and transient environment.
Recommended
Seat and Access-System Controller
The R5F113GLLFB#X5 fits seat, access, and occupant-interface controllers that combine local input handling with in-vehicle network communication. Its enhanced CAN, LIN, and IEBus peripherals support diagnostics and distributed control, while Timer RD adds deterministic timing resources for motor-position or indicator functions. The 64-pin LQFP provides enough external connectivity for position sensors and switches, subject to the exact pin map and qualified operating limits.
Recommended
Recommended Products Summary
Engineering reference data for R5F113GLLFB#X5 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | R5F113GLLFB#H5 | R5F113GLKFB#X5 | R5F113LLLFB#X5 |
|---|---|---|---|---|
| Package | 64-pin LQFP | 64-pin LQFP | 64-pin LQFP | 64-pin LQFP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| CPU Architecture | 16-bit RL78 core | 16-bit RL78 core | 16-bit RL78 core | 16-bit RL78 core |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Automotive Communications | Enhanced CAN, LIN, and IEBus | Enhanced CAN, LIN, and IEBus family configuration | Enhanced CAN, LIN, and IEBus family configuration | Enhanced CAN, LIN, and IEBus family configuration |
| Motor-Control Timer | Enhanced Timer RD | Enhanced Timer RD | Enhanced Timer RD | Enhanced Timer RD |
| Target Temperature | 125 °C at 24 MHz | 125 °C target family capability | 125 °C target family capability | 125 °C target family capability |
| Ordering-Code Family | G-series X5 configuration | G-series H5 configuration | K-series X5 configuration | L-series X5 configuration |
Key Differentiators
- Integrated automotive network connectivity (vs R5F113LLLFB#X5)
- Dedicated motor-control timing resource (vs R5F113GLLFB#H5)
- 64-pin integration with three automotive bus types (vs R5F113GLKFB#X5)
- Upward-compatible RL78/F15 migration path (vs R5F113GLLFB#H5)
Design Notes
Place the 64-pin LQFP using the manufacturer-recommended land pattern and verify pin 1 orientation against the PCB silkscreen. Reserve short, direct routes for CAN, LIN, and IEBus signals, and keep switching or motor-drive stages away from MCU clock, reset, and sensitive input traces. Route high-current loads to external drivers rather than through MCU-adjacent signal paths.
Separate controller and load-supply paths with local bulk and bypass capacitors placed close to their respective pins. Automotive transients can propagate through power and signal wiring, so the final schematic must include the reverse-battery, load-dump, and ESD protection required by the vehicle platform. Check the exact electrical limits in the Renesas datasheet before selecting capacitor voltage ratings.
Do not treat the H5, K-series, or L-series suffix changes as automatically interchangeable. Confirm package drawing, terminal mapping, flash size, RAM size, clock limits, qualification grade, and operating-temperature range for every candidate. Although Renesas describes the RL78/F15 family as pin and software upwards compatible with RL78/F14, board-level substitutions still require schematic, firmware, and timing validation.
Use the manufacturer oscillator and reset configuration exactly, including all recommended external components and layout clearances. Keep the oscillator path away from CAN, LIN, IEBus, and motor-control outputs. If the PCB combines communications and external power stages, use a continuous return path and minimize shared copper between noisy outputs and MCU references.
Compliance Information
The component is identified as an automotive RL78/F15 microcontroller, but no specific RoHS, REACH, AEC-Q100 grade, lead-free, halogen-free, or conflict-minerals declaration appears in the retrieved product information.