SI3019-F-GT Global Line-Side DAA | Skyworks Solutions
MPN: SI3019-F-GT ⚠ Last Time BuySI3019-F-GT Overview
A Direct Access Arrangement, or DAA, is a line-side interface circuit that converts digital voice data into an analog telephone signal and receives analog line signals for conversion back into digital data. Within the telecommunications hierarchy, the DAA is a telecom interface IC connected to a host controller such as the Si3050, with the combined devices implementing a programmable global voice interface.
The SI3019-F-GT supports a PCM highway data interface, μ-law and A-law companding, an SPI control interface, and a GCI interface. According to the Skyworks Solutions manufacturer datasheet, it also provides 80 dB dynamic range, transmit and receive line-voltage monitoring, loop-current monitoring, selectable +6 dBm or +3.2 dBm transmit and receive levels, and parallel handset detection. These functions support centralized configuration, international line adaptation, and supervision of the telephone interface.
The device separates line-side signal handling from host-side control. The Si3050 manages voice-channel processing and digital signaling, while the SI3019-F-GT handles the analog line interface, level control, line-state measurement, and loop-current detection. This division supports programmable voice systems for voice-over-IP gateways, digital loop carriers, customer premises equipment, and other foreign-exchange-office products.
Typical applications include voice gateways, Voice-over-IP adapters, digital loop carrier line cards, embedded voice servers, and telephony access equipment. The 16-TSSOP package is suitable for conventional surface-mount PCB assembly, while its 80 dB dynamic range provides headroom for voice-band signal chains. Global companding support and selectable line levels make the device useful in systems intended for multiple regional telephone standards.
Designers should place the SI3019-F-GT close to the line-interface protection and network-side components, maintain short analog signal paths, and follow the manufacturer’s recommended external component values and PCB layout. The 3 V to 3.6 V supply range requires a regulated rail compatible with the associated Si3050 controller and the complete voice-interface subsystem.
This product page combines the SI3019-F-GT interface capabilities, package characteristics, application guidance, lifecycle information, and verified cross-reference results. It also explains when this discontinued family member should be selected for an existing design and when a redesign is more appropriate.
Drop-in alternatives for SI3019-F-GT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesSI3019-F-GT Specifications
| Product Type | Programmable global line-side Direct Access Arrangement IC |
| Line-Side Interface | Global FXO analog line interface |
| Associated Controller | Si3050 voice DAA chipset |
| Supply Voltage Range | 3 V to 3.6 V |
| Operating Temperature Range | -40°C to 85°C |
| Package | 16-TSSOP |
| Mounting Type | Surface mount |
| Digital Voice Interface | PCM highway |
| Companding Support | μ-law and A-law |
| Control Interface | SPI |
| Host Interface | GCI |
| Dynamic Range | 80 dB |
| Line Monitoring | Transmit and receive line-voltage monitoring |
| Loop Monitoring | Loop-current monitoring |
| Transmit and Receive Level Modes | +6 dBm or +3.2 dBm |
| Handset Detection | Parallel handset detection |
| Minimum Order Quantity | 96 units |
SI3019-F-GT 16-tssop Pin Configuration Guide
Pin configuration for SI3019-F-GT (16-tssop package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for SI3019-F-GT.
Refer to the datasheet for full pin configuration.
Typical Applications
SI3019-F-GT is suitable for 6 applications: Voice-over-IP Gateways, Digital Loop Carrier Line Cards, Embedded Voice Servers, Customer Premises Equipment, Telephone Line Interface Cards, Voice Media Gateways.
Voice-over-IP Gateways
The SI3019-F-GT is suitable for a Voice-over-IP gateway that requires an analog FXO line interface alongside a digital voice processor. Its PCM highway data interface connects voice traffic to the associated Si3050, while μ-law and A-law companding supports international voice formats. The 80 dB dynamic range provides useful headroom for the line-side voice path, and the 3 V to 3.6 V supply range fits the chipset architecture. The device also reports transmit and receive line voltage, monitors loop current, and detects a parallel handset, allowing the gateway to supervise the subscriber line without separate analog detection circuitry.
Recommended
Digital Loop Carrier Line Cards
The SI3019-F-GT fits digital loop carrier line cards that convert analog subscriber-line signals into a digital voice stream. The PCM highway interface provides a high-speed parallel path to the line-card controller, while GCI and SPI support host communication and register configuration. Its global companding support allows the same hardware to address multiple regional voice formats. Line-voltage monitoring, loop-current monitoring, and parallel handset detection support supervision functions, reducing the amount of external circuitry needed to determine the condition of the telephone line.
Recommended
Embedded Voice Servers
The SI3019-F-GT can provide the analog line-facing section of an embedded voice server or communications appliance. Its programmable SPI control interface allows the host processor to configure operating registers and adapt line behavior, while the PCM highway interface carries voice data between the Si3050 and the line-side circuit. The 80 dB dynamic range supports the voice-band signal path, and selectable +6 dBm or +3.2 dBm transmit and receive level modes provide flexibility for different line-card signal levels. The 16-TSSOP package also supports compact, automated surface-mount assembly.
Recommended
Customer Premises Equipment
The SI3019-F-GT is applicable to customer premises equipment that provides one or more analog telephone-line connections, including voice terminals and branch-office adapters. The global FXO interface and μ-law or A-law companding make the design adaptable to different regional telephone networks. Integrated line-voltage and loop-current monitoring allows the host to identify line events, while parallel handset detection identifies when a conventional telephone is connected. Operating from -40°C to 85°C supports industrial and telecommunications environments where the assembly may operate outside controlled room temperatures.
Recommended
Telephone Line Interface Cards
The SI3019-F-GT is well suited to plug-in or dedicated telephone line interface cards requiring a controlled analog FXO boundary. The 16-TSSOP package simplifies routing into a conventional multilayer PCB, and the PCM highway interface provides a defined connection to the card’s digital voice engine. With 80 dB dynamic range, the line path supports clear voice-band operation. Telemetry functions including line-voltage monitoring, loop-current measurement, and parallel handset detection can be used by the host controller to implement line-state reporting and maintenance diagnostics.
Recommended
Voice Media Gateways
The SI3019-F-GT can serve as the subscriber-line interface in a voice media gateway connecting legacy analog lines to packetized voice services. The Si3050 handles digital voice processing while the SI3019-F-GT performs the line-side conversion and monitoring functions. Global companding support and programmable level modes allow regional adaptation without redesigning the analog interface. Its operating range of -40°C to 85°C accommodates telecom-room and network-edge installations, although new deployments should account for the family’s last-time-buy lifecycle status and plan for long-term obsolescence management.
Recommended
Recommended Products Summary
Engineering reference data for SI3019-F-GT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Skyworks Solutions |
| Package | 16-TSSOP |
| Product Type | Programmable global line-side DAA |
| Supply Voltage Range | 3 V to 3.6 V |
| Operating Temperature Range | -40°C to 85°C |
| Dynamic Range | 80 dB |
| Digital Voice Interface | PCM highway |
| Companding | μ-law and A-law |
| Control Interface | SPI |
| Lifecycle Status | Last time buy |
Key Differentiators
- Global line-side functionality in one 16-TSSOP device (vs SI3019-F-GSR)
- Integrated line supervision reduces external sensing requirements (vs Discreet line-monitoring circuitry)
- Programmable support for international voice formats (vs Fixed-region line interface)
Design Notes
Place the SI3019-F-GT close to the analog line-network components and route PCM highway, GCI, and SPI traces away from the line-side sensing paths. Keep the 16-TSSOP ground connections and decoupling layout consistent with the manufacturer application diagram. The 3 V to 3.6 V rail must be decoupled at the device pins, with the shortest possible return path to the supply reference.
Treat transmit and receive monitoring paths as sensitive analog nets even though the device reports their values digitally. Avoid sharing narrow PCB traces with switching-converter or high-current routing, and maintain separation between the line interface and digital voice interface where practical. Verify every pin assignment against the official pin-description table before releasing the PCB artwork.
Do not treat a same-function family suffix as a drop-in alternative without checking the package drawing and ordering information. SI3019-F-GSR is associated with an SOIC package, while SI3019-F-GTR represents the tape-and-reel order form of the 16-TSSOP device. For production continuity, use the exact ordering code, confirm the 96-unit new-order minimum, and preserve the original footprint and pin configuration.
Compliance Information
The manufacturer discontinuation notification confirms last-time-buy ordering conditions and a 96-unit minimum order quantity. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product materials.