STMicroelectronics

STM32F205ZET7 - 120MHz Cortex-M3 512KB MCU | STMicroelectronics

MPN: STM32F205ZET7 ✓ Active
144-pin LQFP Package 120 MHz Speed 512 KB Memory
MOQ: 1 |

STM32F205ZET7 Overview

The STMicroelectronics STM32F205ZET7 is a 32-bit ARM Cortex-M3 microcontroller operating up to 120 MHz, with 512 KB of Flash memory and 114 I/O in a 144-pin LQFP package measuring 20 mm by 20 mm. It belongs to the STM32F2 series of high-performance embedded microcontrollers and combines real-time control, communications, and external peripheral support in one device.

An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor core designed for embedded control. STM32F2 devices add Flash and SRAM memory, clock and reset management, GPIO, communication peripherals, and hardware acceleration into a compact system-on-chip. The STM32F205ZET7 provides 150 DMIPS and an ART Accelerator that supports 0-wait-state execution from Flash, making it suitable for control systems requiring fast deterministic response without external memory.

The STM32F205ZET7 provides 120 MHz maximum clock operation, 512 KB of Flash, 114 I/O, and 150 DMIPS processing performance according to the manufacturer datasheet information. Its 144-LQFP package exposes a large pin count for mixed-signal and connectivity-intensive designs. The family also includes an MPU and a complete set of general-purpose timers, making the device appropriate for motor, industrial, communications, and embedded-control equipment.

The STM32F20x architecture combines the Cortex-M3 core with the ART Accelerator, memory protection, and extensive peripheral integration. Peripheral features include 12-bit ADCs, DACs, communication interfaces, and timers; exact channel counts, voltage limits, and peripheral configurations should be confirmed in the manufacturer datasheet before final schematic and firmware design. The 120 MHz operating ceiling also makes clock-tree configuration, Flash wait-state handling, and brownout behavior important parts of a robust design.

Typical applications include industrial automation controllers, communications equipment, audio and signal-processing systems, motor-control platforms, and data-acquisition units. The combination of 512 KB Flash, 114 I/O, and 120 MHz performance is particularly useful when several external sensors, actuators, communication transceivers, and human-machine interfaces must share one controller. Its large LQFP package also eases inspection and rework compared with denser leadless packages.

PCB implementation should preserve the pin assignment and decoupling requirements defined in the manufacturer datasheet. Place bypass capacitors close to the supply pins, route high-speed and sensitive signals away from switching nodes, and provide solid ground-plane continuity. Confirm the exact oscillator, debug, reset, and communication connections before releasing a layout because alternate package functions and peripheral multiplexing can change pin availability.

This product page combines the verified device identity, electrical characteristics, package information, compatible STM32F2 family replacements, and practical selection guidance. It is intended to accelerate engineering review while keeping final component decisions anchored to the official STM32F205ZE documentation and device ordering information.

Drop-in alternatives for STM32F205ZET7 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with STM32F205ZET7 (same form factor and footprint) — differing in Package, SRAM, Core Performance, ADC Count, ART Accelerator.

STMicroelectronics
Package: 100-pin LQFP (14x14 mm)
SRAM: 100 KB (including 4 KB CCM)
ART Accelerator: Yes (0-wait-state Flash execution)
Compare with STM32F205ZET7 →
STMicroelectronics
Package: 144-LQFP
SRAM: 128 Kbytes
ADC Count: 3 ADCs
Compare with STM32F205ZET7 →
STMicroelectronics
Package: LQFP144 (20x20 mm)
SRAM: 128 KB
Compare with STM32F205ZET7 →
STMicroelectronics
Package: 144-LQFP
SRAM: 128 KB
Core Performance: 150 DMIPS at 120 MHz
Compare with STM32F205ZET7 →

STM32F207ZET6

✅ Drop-In ⚠️ Specs Unverified
STMicroelectronics
📦 144-LQFP (20x20)
ARM Cortex-M3 · 120 MHz · 512 KB · 128 KB · 1.8V to 3.6V · -40°C to +85°C · LQFP144 (20x20 mm) · 114

Contact for price

View Datasheet →

STM32F205ZGT6

✅ Drop-In ⚠️ Specs Unverified
STMicroelectronics
📦 144-LQFP (20x20)
Arm 32-bit Cortex-M3 · 120 MHz · 32-bit RISC · 150 DMIPS · 1.25 DMIPS/MHz · 1 MB Flash · 1 M x 8 bits · 128 Kbytes

Contact for price

View Datasheet →

STM32F205ZBT6

✅ Drop-In ⚠️ Specs Unverified
📦 144-LQFP (20x20)
Flash decreases from 512 KB to 128 KB, a 75% reduction, with the same STM32F205 family and 144-LQFP footprint

📋 Reference alternative (not in catalog)

STM32F215ZET6

✅ Drop-In ⚠️ Specs Unverified
📦 144-LQFP (20x20)
Same 120 MHz Cortex-M3 and 512 KB Flash class; F215-specific connectivity and cryptographic functions require review

📋 Reference alternative (not in catalog)

STM32F217ZET6

✅ Drop-In ⚠️ Specs Unverified
STMicroelectronics
📦 144-LQFP (20x20)
32-bit ARM Cortex-M3 microcontroller · 120 MHz · ARM 32-bit Cortex-M3 RISC · 512 KB · 512K x 8 bits · 128 KB · 4 KB · 150 DMIPS at 120 MHz

Contact for price

View Datasheet →

STM32F205ZCT6

✅ Drop-In ⚠️ Specs Unverified
📦 144-LQFP (20x20)
Flash decreases from 512 KB to 256 KB, a 50% reduction, while retaining the STM32F205 family and 144-LQFP footprint

📋 Reference alternative (not in catalog)

STM32F205ZET7 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
CPU Core ARM Cortex-M3
Architecture 32-bit RISC
Maximum CPU Frequency 120 MHz
Flash Memory 512 KB
Flash Organization 512K x 8 bits
Core Performance 150 DMIPS
Performance per MHz 1.25 DMIPS/MHz
Flash Execution 0-wait state with ART Accelerator
I/O Count 114 I/O
Memory Protection Unit Present
ADC Resolution 12 bit
Package 144-pin LQFP
Package Body Size 20 mm x 20 mm
Mounting Type Surface mount

STM32F205ZET7 20 mm x 20 mm Pin Configuration Guide

Pin configuration for STM32F205ZET7 (20 mm x 20 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

20 mm x 20 mm package pinout diagram for STM32F205ZET7

No detailed pinout data available for STM32F205ZET7.

Refer to the datasheet for full pin configuration.

Typical Applications

STM32F205ZET7 is suitable for 6 applications: Industrial Automation Controller, Motor Control and Power Conversion, Communications Equipment, Data Acquisition and Instrumentation, Embedded Graphical and HMI Equipment, Audio and Signal Processing.

🏭

Industrial Automation Controller

The STM32F205ZET7 fits industrial automation controllers that must coordinate sensors, actuators, communications, and real-time control functions. Its 120 MHz ARM Cortex-M3 core delivers 150 DMIPS, while 512 KB of Flash provides room for control algorithms, communications stacks, diagnostics, and field-upgrade code. The 114 I/O and 144-LQFP footprint make external signal conditioning and transceiver connections practical. A 0-wait-state ART Accelerator supports responsive execution from Flash. During hardware design, validate each timer channel, ADC input, alternate function, and supply rail against the STM32F20x pin table before layout approval.

⚡

Motor Control and Power Conversion

The STM32F205ZET7 supports sophisticated motor-control and power-conversion systems by combining high-speed Cortex-M3 execution with extensive timers, ADCs, and 114 I/O. The 120 MHz operating rate provides timing headroom for current sampling, speed calculations, and control-loop updates, while 512 KB of Flash can hold algorithms and parameter management. The same device can supervise power stages, fault signals, encoders, and communications transceivers. Its LQFP package also exposes more pins than a small leadless MCU, supporting power and ground distribution. Confirm timer-channel mapping, ADC trigger paths, break input behavior, and pin multiplexing in the manufacturer documentation.

🌐

Communications Equipment

The STM32F205ZET7 is suited to communications equipment that requires protocol processing, data buffering, status reporting, and multiple external interfaces. Its 120 MHz Cortex-M3 core executes at 150 DMIPS and includes an ART Accelerator for 0-wait-state Flash performance, while 512 KB accommodates firmware, configuration data, and communication tables. With 114 I/O, a board can connect UART, SPI, I2C, CAN, or other interface circuitry without relying on a very small package. For gateways and network equipment, validate the selected communication peripherals, package assignments, oscillator requirements, and signal levels. Firmware should also be checked for deterministic interrupt latency and peripheral instance differences.

🔧

Data Acquisition and Instrumentation

The STM32F205ZET7 works well in data-acquisition and test-instrumentation front ends where an instrument must sample sensors, process results, and present data through multiple interfaces. The MCU provides a 120 MHz Cortex-M3 core, 512 KB of Flash, 12-bit ADC capability, 114 I/O, and 150 DMIPS, giving it enough performance for filtering, calibration, and protocol handling. The 144-LQFP package provides dedicated space for analog inputs, digital controls, communications, and debugging. Engineers should verify ADC input ranges, sampling time, trigger assignments, reference configuration, and external interface pins against the manufacturer datasheet, then account for analog grounding and digital return-current separation.

📺

Embedded Graphical and HMI Equipment

The STM32F205ZET7 can serve as the control processor in embedded human-machine interfaces and display-oriented industrial equipment. Its 120 MHz Cortex-M3 performance and 512 KB of Flash support event handling, graphics-message preparation, keypad logic, status monitoring, and communications with an external display controller. The 114 available I/O allow parallel displays, touch controllers, rotary encoders, LEDs, and external memory to be connected within one system. A 20 mm square LQFP is also convenient for inspection and automated assembly. When planning the PCB, map all display and touch signals according to the exact alternate-function table and separate display-related return currents from sensitive analog routing.

🎧

Audio and Signal Processing

The STM32F205ZET7 accommodates audio controllers and real-time signal-processing platforms that require deterministic control alongside communication and data acquisition. The Cortex-M3 core operates up to 120 MHz and reaches 150 DMIPS, while 512 KB of Flash can store DSP routines, protocol handlers, and configuration data. Its 12-bit ADC resources and 114 I/O support analog sampling, digital audio interfaces, control lines, and status indicators. The LQFP package offers a practical balance between pin access and assembly visibility. Use the manufacturer electrical data and pin description to confirm which timers and serial interfaces support the required audio paths, and pay particular attention to analog reference quality and ground-return layout.

What is the STM32F205ZET7?
The STM32F205ZET7 is a high-performance 32-bit STMicroelectronics microcontroller built around an ARM Cortex-M3 core. It operates up to 120 MHz, provides 512 KB of Flash, delivers 150 DMIPS, and exposes 114 I/O in a 144-pin LQFP package. According to the STMicroelectronics product page, it belongs to the STM32F20x family, which combines the Cortex-M3 core with extensive real-time peripherals and an ART Accelerator for 0-wait-state Flash execution.
What are the key specifications of STM32F205ZET7 that engineers should know?
The STM32F205ZET7 combines a 120 MHz ARM Cortex-M3 core, 512 KB Flash, 114 I/O, and 150 DMIPS in a 20 mm by 20 mm 144-pin LQFP. According to the manufacturer datasheet information, the ART Accelerator enables 0-wait-state execution from Flash and the core includes an MPU. These characteristics place the device between simpler Cortex-M3 microcontrollers and higher-pin-count systems requiring substantial analog, timer, and communications connectivity.
Where can I download the STM32F205ZET7 datasheet PDF?
The official STM32F205ZE product page is the preferred starting point for the STM32F205ZET7 datasheet and supporting documentation. It identifies the device within the STM32F20x family and links to manufacturer technical resources. Use the package drawings, pin-definition table, electrical characteristics, memory map, and peripheral sections from that documentation when assigning the 144 LQFP pins or validating a board design.
Where can I find the STM32F205ZET7 pinout?
The STM32F205ZET7 pinout is documented in the pin-definition section of the STM32F20x manufacturer documentation. The device uses a 144-pin LQFP package with 114 I/O, so designers should not infer connections from an STM32F205ZET6 or STM32F205ZGT6 board without checking the exact ordering code. Assign the pin-description table from the official datasheet and preserve each peripheral's alternate-function requirements in the PCB layout.
What is the STM32F205ZET7 operating voltage range?
The STM32F205ZET7 supply-voltage limits must be taken from the STM32F20x electrical-characteristics table because the allowed operating range can depend on the power-supply arrangement and operating conditions. The confirmed core operating point is up to 120 MHz. Before applying that frequency, verify the valid supply range, regulator type, decoupling network, Flash wait states, and temperature conditions in the official manufacturer datasheet.
Where can I buy STM32F205ZET7 and request a quotation?
The STM32F205ZET7 can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial terms, quantity availability, lead time, and order confirmation because market conditions and factory schedules can change. For engineering review, identify the 144-LQFP package, 512 KB Flash requirement, and 120 MHz performance target before submitting the request.
What is the current price of STM32F205ZET7?
Current commercial pricing for the STM32F205ZET7 is obtained through the Request a Quote form on this page. Submit the required quantity and packaging details to receive an actionable quotation. The part should be specified as the 512 KB Flash, 120 MHz, 144-LQFP device with the exact ordering suffix STM32F205ZET7 so that the quotation corresponds to the intended device variant.
What is the lead time and stock status of STM32F205ZET7?
Request the current lead time, minimum order quantity, and stock allocation through the Request a Quote form on this page. These commercial details should not be inferred from generic marketplace snippets because inventory, production schedules, and regional allocation may change. Include the target quantity and whether reel, tray, or another permitted delivery format is required for an accurate production response.
STM32F205ZET7 vs STM32F207ZET6 - which is better for a control system?
The STM32F207ZET6 is the closest same-package alternative when a second source within the STM32F2 family is required. Both devices use the 120 MHz Cortex-M3 architecture and a 144-pin LQFP format, while the F207 variant adds connectivity functions that must be checked against the original schematic. According to ST community compatibility information, migration within the F205, F207, F215, and F17 families can preserve hardware compatibility when Flash, package, and temperature grade match.
What is the difference between STM32F205ZET7 and STM32F205ZGT6?
The primary documented difference is Flash capacity: STM32F205ZET7 has 512 KB, while STM32F205ZGT6 provides 1 MB. Both belong to the STM32F205 family and use the 144-pin LQFP package, making the G6 a practical footprint-compatible upgrade when more firmware space is needed. The suffix and temperature-grade encoding should still be reconciled with the manufacturer ordering table before approving a substitution.
When should I choose STM32F205ZET7 over STM32F205ZGT6?
Choose STM32F205ZET7 when 512 KB of Flash is sufficient and the design does not require the extra memory offered by STM32F205ZGT6. Both parts use the 144-pin LQFP footprint and operate in the same STM32F205 family ecosystem, so the decision can be based primarily on software sizing, qualification, and ordering requirements. Choose the G6 instead when the application, bootloader, diagnostics, or future firmware expansion needs more than 512 KB.
Is STM32F205ZET7 suitable for industrial control and communications equipment?
The STM32F205ZET7 is suitable for many industrial-control and communications designs because it combines 120 MHz processing, 512 KB Flash, 114 I/O, 150 DMIPS, and a 20 mm by 20 mm LQFP package. Its large pin count supports multiple sensors, actuators, transceivers, and human-machine interfaces. The final design still requires checking supply voltage, communications peripherals, pin multiplexing, and environmental limits in the manufacturer datasheet.
What can replace the STM32F205ZET7?
The most direct replacements are same-package STM32F2 devices such as STM32F207ZET6 and STM32F205ZGT6, provided Flash capacity, temperature grade, peripheral configuration, and firmware support match the original design. ST community compatibility information identifies the F205, F207, F215, and F17 families as candidates for hardware migration under matching conditions. A cross-brand MCU should not be called a drop-in replacement unless its package, pinout, clock behavior, memory map, and toolchain support are independently validated.
Is STM32F205ZET7 the same as STM32F207ZET6?
No. The STM32F205ZET7 and STM32F207ZET6 share the Cortex-M3 architecture, 120 MHz maximum frequency, 512 KB Flash class, and 144-pin LQFP package, but they are not identical devices. The STM32F207 adds or changes communications capabilities, so the replacement must be checked for every peripheral and signal used by the board. Package compatibility alone does not guarantee uninterrupted software operation.
Can STM32F205ZET7 control a motor or data-acquisition system?
The STM32F205ZET7 can support motor-control and data-acquisition designs because it provides a 120 MHz Cortex-M3 core, 150 DMIPS, 12-bit ADCs, extensive timers, 114 I/O, and 512 KB of Flash. The practical limits are set by the selected timer channels, ADC inputs, communication interfaces, pin multiplexing, and package assignments. Use the manufacturer pin table and electrical characteristics to map sensors, gate drivers, data converters, and protection circuits.

Engineering reference data for STM32F205ZET7 — comparison, design guidance, and compliance information.

Selection Guide

Choose STM32F205ZET7 when the design needs a 120 MHz ARM Cortex-M3 controller, 512 KB of Flash, 114 I/O, and a readily inspectable 144-LQFP package. It is a strong fit for industrial control, communications, motor-control, instrumentation, and embedded HMI systems that need more connectivity than a small-package MCU can provide. Choose STM32F205ZGT6 when the same family and footprint are desired but 1 MB of Flash is required. Choose STM32F205ZCT6 or STM32F205ZBT6 only when their smaller 256 KB or 128 KB Flash capacities are sufficient. Choose STM32F207ZET6, STM32F215ZET6, or STM32F217ZET6 when the additional family-specific communications or security functions are useful. In every case, validate the exact pin multiplexing, temperature suffix, peripheral set, clock configuration, and firmware support before approving a replacement.

Comparison with Alternatives

Parameter This Product STM32F207ZET6 STM32F205ZGT6 STM32F205ZBT6 STM32F215ZET6 STM32F217ZET6 STM32F205ZCT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 144-LQFP (20x20) 144-LQFP (20x20) 144-LQFP (20x20) 144-LQFP (20x20) 144-LQFP (20x20) 144-LQFP (20x20) 144-LQFP (20x20)
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 512 KB 512 KB 1 MB 128 KB 512 KB 512 KB 256 KB
Core Performance 150 DMIPS 150 DMIPS 150 DMIPS 150 DMIPS 150 DMIPS 150 DMIPS 150 DMIPS
I/O Count 114 I/O 114 I/O 114 I/O 114 I/O 114 I/O 114 I/O 114 I/O
ADC Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
Flash Execution 0-wait state with ART Accelerator 0-wait state with ART Accelerator 0-wait state with ART Accelerator 0-wait state with ART Accelerator 0-wait state with ART Accelerator 0-wait state with ART Accelerator 0-wait state with ART Accelerator
Primary Family Feature STM32F205 high-performance connectivity family F207 connectivity enhancement F205 with 1 MB Flash F205 with 128 KB Flash F215 enhanced connectivity and cryptography F217 enhanced connectivity and Ethernet F205 with 256 KB Flash

Key Differentiators

  • Large 144-pin LQFP interface count (vs STM32F205ZBT6)
  • Direct same-footprint memory upgrade (vs STM32F205ZCT6)
  • Additional Flash without a larger package (vs STM32F205ZGT6)
  • Connectivity-focused family alternative (vs STM32F207ZET6)

Design Notes

Use the exact STM32F205ZE pin-definition table when assigning every LQFP connection. Place the required bypass capacitors directly at the corresponding supply and ground pins, keep the loop area small, and route high-current returns without splitting the ground plane beneath the device. Check oscillator routing, debug access, reset, boot configuration, and alternate-function signals independently; the 144-pin footprint provides many options, but several functions share pins and cannot all operate simultaneously.

Power the STM32F205ZET7 from a regulator that satisfies the manufacturer voltage and current limits, and verify all supply rails during startup, sleep, and full 120 MHz operation. The ART Accelerator supports 0-wait-state Flash execution, but correct Flash wait-state configuration remains important during clock changes or low-voltage operation. Keep analog and digital return currents separated, use a quiet reference arrangement for the ADC, and avoid routing switching-node currents beneath sensitive input networks.

Treat the 20 mm by 20 mm LQFP as a high-pin-count mixed-signal device. Reserve courtyard clearance for its leads and provide unobstructed access for inspection and rework. Keep oscillator and debug traces short, route communications interfaces away from power-converter switching loops, and use a continuous ground reference beneath the device. If external memories or transceivers are used, review direction and speed requirements for each signal rather than applying one routing rule to the entire board.

Do not substitute an STM32F2 device solely because it has a 144-LQFP package. Confirm Flash capacity, temperature grade, boot behavior, oscillator options, communication peripherals, pin multiplexing, and firmware support before approving a replacement. A part such as STM32F205ZGT6 provides 1 MB rather than 512 KB of Flash, while lower-memory F205 variants may not fit the existing image. After any substitution, rebuild the project with the appropriate device definition and rerun boot, clock, peripheral, and boundary-condition tests.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The STM32F205ZET7 is an industrial and commercial microcontroller rather than an AEC-Q100-qualified automotive device. Detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be taken from the current manufacturer product documentation or declaration files.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

STM32F205ZET7 datasheet STM32F205ZET7 pinout STM32F205ZET7 datasheet pdf STM32F205ZET7 specifications STM32F205ZET7 equivalent STM32F205ZET7 replacement STM32F205ZET7 cross reference STM32F205ZET7 vs STM32F207ZET6 STM32F205ZET7 LQFP-144 pinout STM32F205ZET7 price STMicroelectronics STM32F205ZET7 STM32F205ZET7 industrial controller STM32F205ZET7 motor control STM32F205ZET7 schematic

Related Components & Terms

STMicroelectronics STM32F205ZET7 STM32F207ZET6 STM32F205ZGT6 STM32F205ZBT6 STM32F215ZET6 STM32F217ZET6 STM32F205ZCT6 ARM Cortex-M3 32-bit RISC microcontroller embedded microcontroller system-on-chip STM32F2 series STM32F20x family ART Accelerator Flash memory SRAM Micro Processing Unit 120 MHz 150 DMIPS 512 KB Flash 114 I/O 144-LQFP QFP family surface mount SMD 12-bit ADC industrial automation motor control data acquisition human-machine interface
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details