STMicroelectronics

STM32F439NGH6 - 180MHz 1MB MCU | STMicroelectronics

MPN: STM32F439NGH6 ✓ Active
2.5 V or 3.3 V Vdss 216-TFBGA (13 x 13 mm) Package 180 MHz Speed 1 MB (1M x 8 bits) Memory
MOQ: 1 |

STM32F439NGH6 Overview

The STMicroelectronics STM32F439NGH6 is a 32-bit Arm Cortex-M4 microcontroller operating at up to 180 MHz, with 1 MB of embedded flash, in a 216-TFBGA package measuring 13 x 13 mm. It combines a high-performance Cortex-M4 core with extensive connectivity and multimedia-oriented peripherals for industrial control, embedded networking, human-machine interfaces and connected equipment.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory and peripheral interfaces onto one package. Within the hierarchy of semiconductor devices, the STM32F439NGH6 belongs to the ARM Cortex-M microcontroller family and the STM32F4 series, combining real-time processing, flash program memory and integrated communication peripherals on a single surface-mount device.

Three headline characteristics define this part: a 180 MHz maximum operating frequency, 1 MB of flash memory, and a compact 216-TFBGA package. Its 32-bit RISC architecture supports efficient control-loop and signal-processing workloads, while the large embedded flash capacity allows substantial application code, configuration data, bootloader logic and graphical assets to be stored directly on the chip.

The STM32F439NGH6 is built for applications requiring more peripheral integration than entry-level Cortex-M devices. Its feature set is suited to Ethernet-connected control equipment, industrial gateways, motor and motion control, instrumentation, audio and multimedia control, and external storage or display interfaces. Operating from a 2.5 V or 3.3 V supply, the device supports integration into both industrial and embedded consumer platforms.

The 216-TFBGA construction offers a high pin count for parallel and high-speed peripheral access, but it also demands careful PCB layout and assembly planning. Designers should provide the decoupling, power, clock and signal-integrity arrangements specified by the manufacturer datasheet. Because the package has fine-pitch balls and a large thermal footprint, prototype assembly and inspection require suitable board-level process capability.

A key design consideration is the balance between performance and power management. Running the Cortex-M4 core at 180 MHz increases available processing throughput, but clock, memory and peripheral activity also determine system power consumption. Use the manufacturer clock-tree configuration and low-power modes rather than driving the device at its maximum frequency by default.

This page combines the manufacturer's STM32F439NG product information with distributor specifications, package details and practical engineering guidance. It also documents same-footprint STM32F4 options so engineers can evaluate capacity, temperature-grade and feature differences before committing a design to production.

Drop-in alternatives for STM32F439NGH6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with STM32F439NGH6 (same form factor and footprint) — differing in Package, Core, Flash Memory, Product Type.

STMicroelectronics
Package: TFBGA176 (14x14 mm)
Core: ARM Cortex-M4 with FPU
Flash Memory: 1 MB
Compare with STM32F439NGH6 →
STMicroelectronics
Package: 216-TFBGA, 13 x 13 mm
Flash Memory: 2 MB
Product Type: 32-bit microcontroller
Compare with STM32F439NGH6 →

STM32F439NGH7

✅ Drop-In ⚠️ Specs Unverified
📦 216-TFBGA (13 x 13 mm)
Same 180 MHz core, 1 MB flash and 216-TFBGA footprint; temperature-grade ordering code differs

📋 Reference alternative (not in catalog)

STM32F439NGH8

✅ Drop-In ⚠️ Specs Unverified
📦 216-TFBGA (13 x 13 mm)
Same 180 MHz core, 1 MB flash and 216-TFBGA footprint; temperature-grade ordering code differs

📋 Reference alternative (not in catalog)

STM32F429NGH6

✅ Drop-In
STMicroelectronics
📦 216-TFBGA (13 x 13 mm)
ARM Cortex-M4 with FPU · 180 MHz · 1 MB · 256 KB · TFBGA176 (14x14 mm) · 1.7V to 3.6V · -40°C to +85°C · 114

Contact for price

View Datasheet →

STM32F437NGH6

✅ Drop-In ⚠️ Specs Unverified
📦 216-TFBGA (13 x 13 mm)
Same STM32F4 family, 180 MHz core class, 1 MB flash target and package; fewer F439-specific functions

📋 Reference alternative (not in catalog)

STM32F439NGH6-TR

✅ Drop-In ⚠️ Specs Unverified
📦 216-TFBGA (13 x 13 mm)
Same 180 MHz core, 1 MB flash and electrical configuration; reel-oriented shipping format instead of tray

📋 Reference alternative (not in catalog)

STM32F439NGH6 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M4 Microcontroller
Core Arm Cortex-M4 with 32-bit RISC architecture
Maximum Clock Frequency 180 MHz
Embedded Flash Memory 1 MB (1M x 8 bits)
Operating Supply Voltage 2.5 V or 3.3 V
Package 216-TFBGA (13 x 13 mm)
Number of Pins 216 pins
Mounting Type Surface mount
Shipping Format Tray
Manufacturer STMicroelectronics
Series STM32F4
Device Family STM32F437xx and STM32F439xx
Program Memory Type Embedded flash
Data Word Size 32 bit
RoHS Status Compliant

STM32F439NGH6 216-tfbga (13 x 13 mm) Pin Configuration Guide

Pin configuration for STM32F439NGH6 (216-tfbga (13 x 13 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

216-tfbga (13 x 13 mm) package pinout diagram for STM32F439NGH6

No detailed pinout data available for STM32F439NGH6.

Refer to the datasheet for full pin configuration.

Typical Applications

STM32F439NGH6 is suitable for 6 applications: Industrial Ethernet Control Terminal, High-Speed Data Acquisition System, Motor and Motion Control Platform, Connected Multimedia and HMI Controller, Instrumentation and Measurement Front End, Embedded Gateway and Communications Hub.

🏭

Industrial Ethernet Control Terminal

The STM32F439NGH6 fits industrial Ethernet control terminals that combine real-time sampling, protocol processing and local actuation. Its Arm Cortex-M4 core operates up to 180 MHz, providing sufficient throughput for protocol stacks, supervisory logic and deterministic control tasks, while 1 MB of embedded flash stores application firmware, configuration and diagnostics. The 216-TFBGA package provides numerous signal assignments for Ethernet, serial communications, status indication and digital I/O. Pair the controller with a qualified Ethernet PHY and isolate network and field-side interfaces according to the equipment architecture.

📊

High-Speed Data Acquisition System

The STM32F439NGH6 is appropriate for data-acquisition equipment where synchronized sampling, buffering and host communication must be handled by one controller. The 180 MHz Cortex-M4 core supports signal conditioning, filtering and real-time decision logic, while the 1 MB flash allocation holds acquisition firmware and calibration tables. Its 216-ball package allows direct connection to high-speed converters, digital data buses and external memory interfaces. Design the analog front end separately, then use the manufacturer electrical and timing specifications to validate converter clocking, input levels and acquisition timing.

⚡

Motor and Motion Control Platform

The STM32F439NGH6 can serve as the central controller in a compact motion-control platform because its Cortex-M4 core delivers up to 180 MHz of processing throughput for current loops, velocity control and fault handling. The 1 MB flash capacity accommodates field-oriented control code, tuning parameters and a bootloader, and the 216-TFBGA package supplies the pin count needed by encoder inputs, control outputs and communications. Keep switching stages and sensitive analog nodes outside the MCU footprint, and follow the datasheet grounding and decoupling guidance to prevent switching noise from disturbing control timing.

📺

Connected Multimedia and HMI Controller

The STM32F439NGH6 supports connected multimedia and human-machine-interface products that need real-time control alongside display, storage and network functions. The 180 MHz processor manages user input, peripheral control and communication tasks, while 1 MB of embedded flash can hold the interface firmware, asset metadata and update logic. The high-pin-count TFBGA package is useful when several external interfaces are required. External flash, LCD and interface timing remain critical design constraints, so validate signal integrity and use the manufacturer pin and timing tables during board implementation.

🧪

Instrumentation and Measurement Front End

The STM32F439NGH6 is well matched to instrumentation products that must convert sensor inputs into calibrated measurements and present them through local or remote interfaces. The 32-bit Cortex-M4 core performs filtering, compensation and control at up to 180 MHz, and the 1 MB flash stores algorithms, calibration coefficients and diagnostic logs. The 216-TFBGA footprint provides access to parallel data buses and communication peripherals without an external discrete interface controller. Maintain clean analog and digital partitioning, provide local reference conditioning, and validate accuracy against the selected converter specification.

🌐

Embedded Gateway and Communications Hub

The STM32F439NGH6 can act as an embedded gateway that aggregates data from local sensors or service modules and forwards it over a network link. Its 180 MHz processing capability supports protocol conversion, buffering and application logic, while 1 MB of flash provides room for multiple networking stacks and configuration services. The 216-TFBGA package is appropriate where the design requires numerous UART, SPI, timer and digital-control connections. Separate network traffic from sensitive measurement circuits, provide controlled clocking, and verify firmware drivers against the exact peripheral configuration of the STM32F439 device.

What are the key specifications of STM32F439NGH6 that engineers should know?
The STM32F439NGH6 is a 32-bit Arm Cortex-M4 microcontroller rated for operation up to 180 MHz, with 1 MB of embedded flash and a 216-TFBGA package measuring 13 x 13 mm. According to the STM32F439NG manufacturer product information, it belongs to the STM32F437xx and STM32F439xx device family and supports a 2.5 V or 3.3 V supply. The high pin count provides access to a broad set of general-purpose and high-speed peripherals, while the large flash capacity permits integrated code, configuration and bootloader storage.
Where can I download the STM32F439NGH6 datasheet PDF?
The STM32F439NGH6 datasheet PDF is available from STMicroelectronics through the official STM32F439NG product documentation. The manufacturer datasheet is the controlling document for pin assignments, electrical limits, clock configuration, memory characteristics and package dimensions. Use the manufacturer link for the latest revision and treat distributor-hosted copies as secondary references. The STMicroelectronics STM32F439NG product page also provides access to the device datasheet and supporting documentation.
Where can I find the STM32F439NGH6 pinout and package information?
The STM32F439NGH6 pinout is defined in the manufacturer datasheet and corresponds to a 216-TFBGA package on a 13 x 13 mm footprint. Because a 216-ball package has many power, ground and signal assignments, use the ball-table and land-pattern information in the STMicroelectronics package documentation rather than inferring connections from a generic BGA drawing. Plan the PCB for the specified ball pitch, exposed thermal requirements, X-ray inspection capability and fine-pitch assembly.
Is STM32F439NGH6 the same as STM32F439NIH6?
No. The STM32F439NGH6 uses a 216-TFBGA package, while the STM32F439NIH6 uses a different package option, so it is not a direct drop-in replacement for an existing STM32F439NGH6 board. Although both devices belong to the STM32F439 family and share the 180 MHz Cortex-M4 and 1 MB flash positioning, package geometry and ball assignment differ. A board change, adapter or new PCB layout is therefore required. Review the manufacturer ordering information before treating the two parts as interchangeable.
What is the best drop-in replacement for STM32F439NGH6?
The closest same-footprint options are the STM32F439NGH7 and STM32F439NGH8 temperature-grade variants, followed by the STM32F429NGH6 when camera and multimedia-specific peripherals are not required. Each uses the 216-TFBGA (13 x 13 mm) format and retains the 180 MHz Cortex-M4 core with 1 MB flash. Compatibility still depends on the required temperature range, peripheral set, firmware configuration and lifecycle goals. Confirm the complete ordering-information table and pin description in the manufacturer datasheet before substitution.
Can STM32F429NGH6 replace STM32F439NGH6?
The STM32F429NGH6 is a close same-package alternative with a 180 MHz Cortex-M4 core, 1 MB flash and a 216-TFBGA footprint, but it is not an unconditional functional replacement. The STM32F429 and STM32F439 families share much of their architecture, while the F439 configuration adds features associated with the F439 device line. Confirm that every required peripheral, pin function, clock source and firmware driver in the target design remains available. Treat this as a qualified engineering substitution rather than an automatic drop-in.
When should I choose STM32F439NGH6 over STM32F429NGH6?
Choose the STM32F439NGH6 when the design requires the specific peripheral complement of the STM32F439 family rather than only a compatible Cortex-M4 core and memory configuration. Both devices operate up to 180 MHz with 1 MB flash in a 216-TFBGA package, so core speed and package size alone do not distinguish them. Select the STM32F429NGH6 only after confirming that its interface set covers every external device, communications standard and control function in the design.
Is STM32F439NGH6 suitable for industrial control and networking equipment?
Yes, the STM32F439NGH6 is suitable for industrial control platforms that need a 180 MHz 32-bit controller, 1 MB of embedded program memory and a high pin-count package. Its Cortex-M4 architecture and extensive peripheral integration fit real-time control, communications gateway and data-acquisition designs. The device operates from a 2.5 V or 3.3 V supply, allowing common industrial and embedded system rails. Final suitability depends on temperature grade, communications peripherals, isolation, EMC requirements and functional-safety architecture.
What can replace STM32F439NGH6?
Same-footprint STM32F4 candidates include the STM32F439NGH7, STM32F439NGH8, STM32F429NGH6 and STM32F437NGH6, each using the 216-TFBGA format. The nearest functional choices are the STM32F439 temperature-grade variants because they retain the same family and core configuration; the STM32F429 and STM32F437 options require a peripheral and firmware review. Board replacement is practical because the package matches, but only an engineer who has checked the exact ordering codes can confirm operational equivalence.
Where can I buy STM32F439NGH6 online?
The STM32F439NGH6 can be requested through the Request a Quote form on this page, which allows buyers to specify quantity, shipment destination and required documentation. The manufacturer maintains an official online ordering channel for this part, and the product is also listed by major authorized distribution channels. Use the Request a Quote form for current commercial confirmation rather than relying on a static listing. Request the current lead time, factory allocation and traceability documentation when placing a production order.
What is the lead time for STM32F439NGH6?
Lead time depends on current factory allocation, order volume and packaging requirements, so request a current quotation for the STM32F439NGH6 through the Request a Quote form on this page. The manufacturer product page supports direct ordering, and distributors track availability for the 216-TFBGA device. A confirmed lead time should be obtained against the exact ordering code and desired quantity. For production planning, also request date-code, lot traceability and change-notification information.
Is STM32F439NGH6 in stock?
Stock for the STM32F439NGH6 changes with manufacturer and distributor inventory, so current availability should be confirmed through the Request a Quote form on this page. The part has an official manufacturer ordering listing and appears in distributor catalogs as an active STM32F4 microcontroller. When requesting availability, state the required quantity, tray packaging requirement, assembly schedule and any acceptable date-code window. This produces a more useful response than a general stock check.
What is the price of STM32F439NGH6?
The current commercial price for the STM32F439NGH6 should be obtained through the Request a Quote form on this page because quantity, packaging, traceability and market conditions affect the final offer. The manufacturer product page provides real-time ordering information for this exact device, while distributor listings support additional purchasing channels. Submit the required quantity and any date-code or qualification requirements with the request to receive an actionable quotation for the 216-TFBGA part.
Does STM32F439NGH6 support both 2.5 V and 3.3 V operation?
Yes, the STM32F439NGH6 is identified as a 2.5 V or 3.3 V microcontroller in the product specifications. The operating rail must still satisfy all device, I/O and external-circuit requirements in the manufacturer datasheet, including absolute maximum ratings and individual peripheral constraints. Do not infer that every I/O pin has the same valid input range at both supply voltages. Review the pin characteristics, power-supply sequence and external-interface levels before selecting components.
Is STM32F439NGH6 RoHS compliant?
Yes, the STM32F439NGH6 is identified as RoHS compliant in the manufacturer product attributes. This means the device is handled within the EU restriction framework for hazardous substances in electrical and electronic equipment. RoHS status does not automatically establish every other compliance requirement, including REACH obligations, halogen-free status, conflict-minerals declarations or automotive qualification. Request the relevant manufacturer declarations when a purchasing specification requires documented environmental or supply-chain compliance.

Engineering reference data for STM32F439NGH6 — comparison, design guidance, and compliance information.

Selection Guide

Choose the STM32F439NGH6 when the design specifically requires an STM32F439 device, a 180 MHz Arm Cortex-M4 core, 1 MB of embedded flash and a 216-TFBGA footprint. Select STM32F439NGH7 or STM32F439NGH8 when a different manufacturer temperature grade is preferable and the ordering table confirms it satisfies the environmental requirement. Use STM32F429NGH6 only when its peripheral set replaces every STM32F439-specific function used by the design and firmware validation passes. STM32F437NGH6 may suit designs that do not need higher-end STM32F4 features, but it requires a similar compatibility review. The STM32F439NGH6-TR is electrically aligned with the target and uses the same package, but its reel-oriented shipping format differs from the tray format listed for STM32F439NGH6. In every case, confirm the ball map, power architecture, peripheral configuration and firmware support before production release.

Comparison with Alternatives

Parameter This Product STM32F439NGH7 STM32F439NGH8 STM32F429NGH6 STM32F437NGH6 STM32F439NGH6-TR
Manufacturer STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 216-TFBGA (13 x 13 mm) 216-TFBGA (13 x 13 mm) 216-TFBGA (13 x 13 mm) 216-TFBGA (13 x 13 mm) 216-TFBGA (13 x 13 mm) 216-TFBGA (13 x 13 mm)
Processor Core Arm Cortex-M4, 32-bit RISC Arm Cortex-M4, 32-bit RISC Arm Cortex-M4, 32-bit RISC Arm Cortex-M4, 32-bit RISC Arm Cortex-M4, 32-bit RISC Arm Cortex-M4, 32-bit RISC
Maximum Frequency 180 MHz 180 MHz 180 MHz 180 MHz 180 MHz 180 MHz
Embedded Flash 1 MB 1 MB 1 MB 1 MB 1 MB 1 MB
Peripheral Set STM32F439 feature set STM32F439 feature set STM32F439 feature set STM32F429 feature set STM32F437 feature set STM32F439 feature set

Key Differentiators

  • Direct STM32F439 family option with a higher temperature-grade ordering code (vs STM32F439NGH7)
  • Closest STM32F4 functional alternative in the same 216-TFBGA footprint (vs STM32F429NGH6)
  • High-density package consolidates more peripheral connections into one component (vs STM32F439NIH6)
  • Substantial embedded flash supports integrated application and firmware storage (vs STM32F437NGH6)

Design Notes

Use the manufacturer land pattern and ball table for the 216-TFBGA (13 x 13 mm) footprint rather than a generic BGA pattern. The 0.5 mm ball pitch requires accurate PCB registration and escape routing, while the high pin count complicates access to inner balls for prototype rework. Reserve the same package footprint for STM32F439NGH7, STM32F439NGH8, STM32F429NGH6, STM32F437NGH6 and STM32F439NGH6-TR only after confirming every ball function and peripheral requirement.

Place the required bulk and high-frequency decoupling capacitors close to their corresponding power and ground balls. Route each supply connection through a dedicated power plane or via field, and keep the 2.5 V or 3.3 V return current close to the device rather than sharing distant paths with switching or communication circuits. Follow the manufacturer pin table for the exact supply balls, exposed-pad connection and allowable operating conditions; the package has many balls, but using only a subset without consulting that table can create voltage-offset errors.

Preserve clock and high-speed signal integrity by keeping oscillator and clock traces short, continuous over a solid reference plane and away from switching nodes. The 180 MHz processor and its peripherals can make edge-rate effects significant even though the data is internally processed at 32 bits. Apply source-series termination where the manufacturer application guidance calls for it, control impedance on external buses, and avoid routing communication lines parallel to noisy power-conversion paths.

The 180 MHz operating point should be treated as a configurable performance target rather than a mandatory default. Select the core voltage, clock dividers, memory states and peripheral clocks that match the workload, and enable appropriate low-power behavior during idle periods. Because the thermal behavior depends on the PCB copper, surrounding components, ambient temperature and activity profile, validate the assembled board with the intended enclosure instead of relying on a junction-temperature estimate made without the actual board construction.

Do not assume that any other STM32F4 device with a similar number of pins is a drop-in replacement. STM32F429NGH6 and STM32F437NGH6 use the same 216-TFBGA format but can differ in peripheral availability, clock implementation, firmware support and feature configuration. Before releasing a substitution, compare the complete ordering information, ball descriptions, electrical characteristics, peripheral inventory and driver requirements. Reuse of the PCB footprint does not by itself guarantee software or functional equivalence.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS compliance is identified in the manufacturer product attributes. AEC-Q100 status, REACH declarations, halogen-free status, lead-free status and conflict-minerals documentation were not established for this ordering code and should be requested when required.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

STM32F439NGH6 datasheet STM32F439NGH6 pinout STM32F439NGH6 datasheet pdf STM32F439NGH6 specifications STM32F439NGH6 216 TFBGA STM32F439NGH6 footprint STM32F439NGH6 180MHz STM32F439NGH6 1MB flash STM32F439NGH6 equivalent STM32F439NGH6 replacement STM32F439NGH6 vs STM32F429NGH6 STMicroelectronics STM32F439NGH6 STM32F439NGH6 price STM32F439NGH6 stock STM32F439NGH6 industrial control

Related Components & Terms

STMicroelectronics STM32F439NGH6 STM32F439NG STM32F439NGH7 STM32F439NGH8 STM32F429NGH6 STM32F437NGH6 STM32F439NIH6 Arm Cortex-M4 32-bit RISC core STM32F4 series microcontroller embedded flash memory 1 MB flash 180 MHz 216-TFBGA 13 x 13 mm package surface-mount device industrial control Ethernet gateway motion control data acquisition RoHS 2.5 V or 3.3 V supply
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details