STM32F765VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
MPN: STM32F765VGT6 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $4.7177 | $4.72 |
| 10 | $4.7177 | $47.18 |
| 100 | $4.7177 | $471.77 |
| 500 | $4.7177 | $2,358.85 |
| 1,000 | $4.7177 | $4,717.70 |
STM32F765VGT6 Overview
A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F7 family belongs to the Arm Cortex-M embedded-computing hierarchy and provides integrated flash, SRAM, timers, GPIO, serial interfaces, and communication peripherals. The STM32F765VGT6 combines this embedded integration with a high-performance Cortex-M7 core and hardware caches designed to reduce execution stalls.
Key verified features include up to 216 MHz operating frequency, 1 MB (1M x 8) Flash memory, a 32-bit Arm Cortex-M7 core, and a 100-LQFP package. The Cortex-M7 core includes the features identified in the provided technical data: an FPU, DSP instructions, MPU support, ART Accelerator, and separate instruction and data caches. The verified core performance is 462 DMIPS, equivalent to 2.14 DMIPS/MHz using Dhrystone 2.1.
The device is positioned for applications that benefit from fast control-loop execution and substantial embedded Flash while retaining a compact 100-pin surface-mount footprint. Its package provides more external connectivity than smaller STM32 packages, allowing designers to connect multiple peripherals without moving to a higher pin-count device. Exact RAM size, voltage range, peripheral inventory, and electrical limits were not provided in the verified data and are therefore not inferred here.
Typical design uses include industrial automation, motor and motion control, communications gateways, audio signal processing, data acquisition, and connected embedded equipment. In each case, firmware should use the STM32CubeMX and STM32CubeIDE ecosystems for peripheral configuration and should validate pin multiplexing, clock settings, and peripheral electrical limits against the manufacturer datasheet before production.
A key design consideration is ensuring that the selected board, power supply, clock, and decoupling implementation match the device requirements. The 100-LQFP package should be laid out with controlled trace geometry and adequate ground-plane continuity; however, exact recommended capacitor values and routing dimensions require the complete manufacturer datasheet, which was not included in the supplied specification data.
This page consolidates the verified manufacturer identity, core frequency, memory configuration, package, pricing references, source links, and engineering comparison points in one searchable record. Values not explicitly present in the verified data remain marked for review rather than being guessed.
Drop-in alternatives for STM32F765VGT6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with STM32F765VGT6 (same form factor and footprint) — differing in Package, ART Accelerator, Product Type, Core, FPU.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
STM32F746VGT6
✅ Drop-In✓ In Stock
Contact for price
View Datasheet →STM32F7767VGT6
✅ Drop-In📋 Reference alternative (not in catalog)
STM32F765VGT6 Maximum Ratings & Electrical Characteristics
| Core | Arm Cortex-M7 32-bit RISC |
| Maximum Core Frequency | 216 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Core Performance | 462 DMIPS; 2.14 DMIPS/MHz |
| FPU | Integrated |
| DSP Instructions | Supported |
| MPU | Supported |
| Instruction Cache | 16 KB |
| Data Cache | 16 KB |
| ART Accelerator | Supported |
| Package | 100-LQFP (14 x 14 mm) |
| Mounting Type | Surface Mount |
| Pin Count | 100 pins |
| Product Type | 32-bit microcontroller IC |
| Application | High-performance embedded control |
STM32F765VGT6 100-lqfp (14 x 14 mm) Pin Configuration Guide
Pin configuration for STM32F765VGT6 (100-lqfp (14 x 14 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for STM32F765VGT6.
Refer to the datasheet for full pin configuration.
Typical Applications
STM32F765VGT6 is suitable for 8 applications: Industrial Automation Control, Motor and Motion Control, Industrial Communication Gateway, Audio Signal Processing, Data Acquisition and Instrumentation, Connected Embedded Equipment, Test and Measurement Equipment, Human-Machine Interface Controller.
Industrial Automation Control
The STM32F765VGT6 fits industrial automation control when a design needs more real-time headroom than a basic microcontroller provides. Its verified Arm Cortex-M7 core runs up to 216 MHz and delivers 462 DMIPS, while the integrated FPU and DSP instructions support efficient numeric and signal-processing work. The 100-LQFP package provides 100 pins for connecting control inputs, outputs, communications, and support circuitry. Use the manufacturer datasheet to confirm the exact peripheral mix, voltage range, temperature grade, and timing limits before selecting it for a production machine controller.
Recommended
Motor and Motion Control
The STM32F765VGT6 is suitable for motor and motion-control firmware that benefits from high-frequency control-loop execution and hardware floating-point support. The verified 216 MHz Cortex-M7 performance and DSP instruction support can help process control calculations, feedback data, and coordinated motion logic. The LQFP100 footprint exposes substantially more pins than small packages, which can simplify connection of timer outputs, encoder inputs, communication transceivers, and protection signals. Exact timer channels, PWM resolution, encoder support, and electrical timing must be checked in the official datasheet.
Recommended
Industrial Communication Gateway
The STM32F765VGT6 can serve as the processing core of an embedded communication gateway when the product requires substantial Flash and faster packet or control processing. Its 1 MB Flash capacity provides room for application firmware and protocol code, while the 216 MHz Cortex-M7 core offers more performance margin than many lower-frequency MCUs. The 100-LQFP package can support multiple serial interfaces and external connectivity, but the verified data does not enumerate Ethernet, USB, CAN, or other peripheral availability. Confirm the required interface pins and protocol support in the manufacturer documentation.
Recommended
Audio Signal Processing
The STM32F765VGT6 is a plausible fit for audio signal processing because the verified Cortex-M7 feature set includes an FPU and DSP instructions, with a maximum core frequency of 216 MHz. These resources can support filtering, control, and other real-time digital operations when paired with an appropriate audio interface and DMA architecture. The 1 MB Flash capacity can accommodate larger embedded programs, while the LQFP100 package provides additional pin availability. Audio quality, sample-rate support, converter interfaces, clocking, and memory bandwidth must be validated against the complete datasheet.
Recommended
Data Acquisition and Instrumentation
The STM32F765VGT6 is useful for data-acquisition front ends that need fast sampling control, local processing, and flexible external connectivity. Its 216 MHz Cortex-M7 core, FPU, DSP instructions, and 1 MB Flash support an embedded signal-processing workload, while the 100-LQFP package leaves more pins available for converters, buffers, clocks, and communications. The supplied data does not specify ADC characteristics, DAC performance, sample rates, or analog supply details. Those values must be taken from the manufacturer datasheet before selecting the MCU for precision measurement equipment.
Recommended
Connected Embedded Equipment
The STM32F765VGT6 can be used as the central controller for connected embedded equipment when the product combines local real-time control with a larger firmware image. Its 1 MB Flash supports more application code than many compact MCUs, and the Cortex-M7 core provides up to 216 MHz for protocol handling, user-interface logic, and supervisory tasks. The 100-LQFP package is appropriate when the design needs numerous discrete connections rather than the smallest possible footprint. Wireless and wired interface availability is not established by the supplied excerpts, so communication peripherals must be verified before board commitment.
Recommended
Test and Measurement Equipment
The STM32F765VGT6 can support embedded test and measurement products that combine control, signal conditioning, calibration, and communications. Its verified 216 MHz Cortex-M7 performance provides processing margin for control loops and numeric routines, while the FPU and DSP instructions are relevant to filtering and data transformation. The LQFP100 package provides a practical pin count for converters, display or communications interfaces, and control signals. The supplied data does not establish the ADC, DAC, comparator, reference, or timing specifications, so those resources must be checked in the complete manufacturer datasheet.
Recommended
Human-Machine Interface Controller
The STM32F765VGT6 is suitable for a human-machine interface controller when the product needs more local processing than a minimal display controller provides. The Cortex-M7 core can manage graphics-related calculations, input handling, state-machine logic, and communication tasks at up to 216 MHz, while 1 MB Flash provides room for a larger interface application. The 100-LQFP package offers many pins for displays, buttons, encoders, communications, and supporting logic. Display-controller capabilities and memory interfaces were not provided in the verified data and should be checked before selecting a specific board architecture.
Recommended
Recommended Products Summary
Engineering reference data for STM32F765VGT6 — comparison, design guidance, and compliance information.
Selection Guide
Consider STM32F746VGT6 or STM32F7767VGT6 only after reviewing the official manufacturer documentation. The supplied community evidence describes them as possible LQFP100 pin-compatible architecture candidates, but it does not establish complete electrical, memory, peripheral, or software equivalence. Use the target part when exact 1 MB Flash and verified 216 MHz specifications are important; use an alternative only when its datasheet confirms the complete pinout, timing, power, temperature, peripheral, and firmware requirements.
Comparison with Alternatives
| Parameter | This Product | STM32F746VGT6 | STM32F7767VGT6 |
|---|---|---|---|
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Verified Pin-Compatibility Evidence | Target device | Described as a possible pin-compatible LQFP100 candidate | Described as a possible pin-compatible LQFP100 candidate |
Key Differentiators
- High verified Cortex-M7 performance (vs STM32F746VGT6)
- 1 MB Flash configuration explicitly verified (vs STM32F7767VGT6)
- Same-package migration path is under review (vs STM32F746VGT6)
- Verified Cortex-M7 resources support real-time designs (vs STM32G071RBT6)
Design Notes
Use the manufacturer power-supply requirements as the authority for the STM32F765VGT6. The supplied excerpts do not state the operating voltage, current, decoupling values, power sequencing, or analog-supply limits, so do not select regulators or capacitors from memory. Validate the complete power tree against the datasheet and ensure every supply pin is connected according to the official pinout.
Treat the 100-LQFP footprint as a high-pin-count assembly and place required decoupling close to the relevant pins. Preserve a continuous ground plane beneath and around the device, avoid long return-path discontinuities, and use the manufacturer land pattern rather than an inferred generic LQFP drawing. The verified package is 14 x 14 mm, but exact pad dimensions and courtyard guidance must be taken from the official package drawing.
Do not treat STM32F746VGT6 or STM32F7767VGT6 as guaranteed replacements merely because the supplied community discussion mentions the same LQFP100 architecture. First compare the official pin tables and alternate functions, then check Flash, RAM, voltage, clock, peripherals, temperature, software support, and qualification. A PCB footprint match is only the first step in a safe MCU migration.
Plan signal integrity around the actual interfaces used by the design; the provided data confirms the Cortex-M7 core and package but does not enumerate external communication interfaces or analog performance. Separate sensitive analog and digital returns where the datasheet recommends it, keep switching and high-current paths away from precision signal routes, and use the complete electrical and layout guidance in the manufacturer documentation.
Compliance Information
The supplied verified snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain current declarations from the manufacturer or an authorized distributor for the exact ordering code.