TG765S-UT - 7-inch TouchWin HMI Touch Screen | XINJE
MPN: TG765S-UT ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $82.81 | $82.81 |
| 10 | $78.67 | $786.70 |
| 100 | $74.53 | $7,453.00 |
| 500 | $70.39 | $35,195.00 |
| 1,000 | $66.25 | $66,250.00 |
TG765S-UT Overview
An HMI (human-machine interface) is an industrial operator terminal that provides a graphical touchscreen window into automation equipment. In the control-system hierarchy, the HMI sits above the PLC (programmable logic controller) and servo drives, letting operators set parameters, trigger recipes, view alarms, and monitor process variables without a PC. HMIs are a core component of SCADA, machine control, and factory automation systems.
Key features of the TG765S-UT include a 7-inch color TFT touchscreen with 800 x 480 pixel resolution, low power consumption with fast operation speed and stable performance per the manufacturer product listing, a DC 24V input supply (nominal range DC 22V to DC 26V, approximately 200 mA consumption for the TG765 family), and serial ports supporting RS-232, RS-422, and RS-485 protocols for direct connection to XINJE XD/XL series PLCs and third-party controllers. The UT suffix denotes the USB port configuration: a USB-B port for project download and a USB-A port for flash disk (USB memory) project transfer.
The TG765S-UT is programmed with XINJE TouchWin Editor software, which supports the full TG765 series including TG765-MT, TG765-UT, TG765-ET, TG765-XT-C, TG765S-MT, TG765S-XT and TG765S-UT. Projects developed for the standard TG765-UT typically port to the TG765S-UT with minimal changes, since both share the 7-inch 800 x 480 display format.
Typical applications include industrial machinery operator panels, packaging and textile machine control, water treatment and pump station monitoring, and small OEM automation cells where a compact, low-cost touch terminal replaces physical buttons and indicator lamps. Its ultra-thin panel-mount format fits standard 7-inch cutouts in control cabinet doors.
A key design consideration: verify the supply rail tolerance (DC 22V to DC 26V) and isolate the 24V supply from inductive loads, and confirm the required serial protocol (232/422/485) versus Ethernet before selecting between the UT and ET variants, as the ET model adds an Ethernet port for networked SCADA access.
This page synthesizes distributor availability, same-family drop-in alternatives, and practical integration notes not consolidated in the manufacturer datasheet, providing engineers a single citable reference for the TG765S-UT.
Drop-in alternatives for TG765S-UT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with TG765S-UT (same form factor and footprint) — differing in Series, Display Size, Color Depth, Consumption Current, Ethernet.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
TG765-UT
✅ Drop-In📋 Reference alternative (not in catalog)
TG765S-MT
✅ Drop-In✓ In Stock
$96 / Unit
View Datasheet →TG765S-ET
✅ Drop-In📋 Reference alternative (not in catalog)
TG765S-XT
✅ Drop-In✓ In Stock
Contact for price
View Datasheet →TG765-ET
✅ Drop-In📋 Reference alternative (not in catalog)
TG765-MT
✅ Drop-In📋 Reference alternative (not in catalog)
TG765-XT-C
✅ Drop-In📋 Reference alternative (not in catalog)
TG765S-UT Specifications (manufacturer-published)
| Display Size | 7.0 inch |
| Resolution | 800 x 480 pixels |
| Input Method | Resistive touchscreen |
| Series | XINJE TouchWin TG765S |
| Variant Code (S-UT) | S = slim/ultra-thin type, UT = USB-B download + USB-A flash disk port |
| Serial Communication | RS-232 / RS-422 / RS-485 |
| USB Ports | USB-B (download), USB-A (flash disk) |
| Input Voltage | DC 24 V (range DC 22 V to DC 26 V) |
| Consumption Current | 200 mA (typical, TG765 series) |
| Ethernet | Not provided on UT variant (see TG765S-ET) |
| Programming Software | XINJE TouchWin Editor |
| Mounting | Panel mount with screws/fixing brackets |
| Form Factor | Ultra-thin HMI enclosure |
TG765S-UT Interfaces & Connectors
TG765S-UT exposes the following interfaces and connectors as published by the manufacturer: USB, Power Input, Ethernet. Expansion header pinout, connector pin numbering, and electrical limits are defined in the manufacturer documentation.
| USB | USB-B (download), USB-A (flash disk) |
| Power Input | DC 24 V (range DC 22 V to DC 26 V) |
| Ethernet | Not provided on UT variant (see TG765S-ET) |
Refer to the manufacturer documentation for the full expansion header pinout and connector pin numbering.
Power & Thermal Characteristics
| Power Input | DC 24 V (range DC 22 V to DC 26 V) |
Power input and thermal parameters for TG765S-UT as published by the manufacturer.
Typical Applications
TG765S-UT is suitable for 6 applications: Industrial Machinery Operator Panel, Pump Stations and Water Treatment Monitoring, Small OEM Automation Cells, Retrofit of Legacy Button Panels, HVAC and Building Automation Panels, Test Benches and Laboratory Equipment.
Industrial Machinery Operator Panel
The TG765S-UT serves as the primary operator interface on OEM machinery such as packaging machines, textile equipment and filling lines. Its 7-inch 800 x 480 touchscreen replaces banks of pushbuttons and indicator lamps, letting operators start/stop cycles, adjust setpoints and acknowledge alarms through graphical screens built in TouchWin Editor. The RS-232/422/485 serial ports connect directly to a XINJE XD/XL PLC or third-party controller without gateways, and the ultra-thin S-series chassis fits shallow control cabinet doors where a standard-depth HMI would not close. The USB-A flash disk port allows service technicians to update the HMI project in the field from a USB stick, avoiding laptop access on the factory floor. Supply it from a clean regulated DC 24V rail (22V-26V, ~200 mA) separated from contactor coils to prevent resets from inductive kickback.
Recommended
Pump Stations and Water Treatment Monitoring
In water treatment skids, booster pump stations and irrigation control cabinets, the TG765S-UT provides local visualization of tank levels, pump status, pressure and fault history. The 24V DC operation (200 mA class consumption) allows powering from the same DC rail as the PLC and level sensors, simplifying cabinet wiring. The RS-485 port supports multi-drop topologies, so one HMI can poll instruments and the controller on a shared serial bus. The resistive 7-inch touchscreen remains operable with gloves and in wet-hand conditions typical of utility rooms. Because the UT variant carries USB-B and USB-A ports, integrators can stage parameter sets on flash disks for different seasonal setpoints. Mount the panel indoors or behind a window; for outdoor cabinets verify the ambient temperature against the datasheet rating and add a cabinet heater or ventilation as needed.
Recommended
Small OEM Automation Cells
For compact OEM cells - benchtop testers, small robots, gluing and dispensing stations - the TG765S-UT offers a cost-effective graphical interface at roughly US $70-83 (as of 2026-10-20 marketplace pricing), well below premium-brand 7-inch HMIs. The 800 x 480 display accommodates recipe tables, trend screens and I/O diagnostics in a footprint that mounts on a swing arm or machine column. Programs are written once in XINJE TouchWin Editor, which also targets the TG765-MT/-UT/-ET/-XT siblings, so an OEM can qualify one HMI project across several machine tiers and swap panels by port configuration. Serial 232/422/485 wiring to the controller uses standard shielded twisted pair. The low power draw and stable performance noted by the manufacturer suit fanless sealed cells where heat budget is limited.
Recommended
Retrofit of Legacy Button Panels
The TG765S-UT is widely used to retrofit aging machinery whose electromechanical button stations or obsolete HMIs have failed. Its standard 7-inch panel cutout and screw-fixing mounting match many legacy openings, and supplier listings emphasize simple installation with included screws and fixing brackets. During retrofit, the RS-232/422/485 ports let the integrator speak the machine's existing serial protocol (many XINJE and third-party drivers are built into TouchWin Editor), while the USB flash disk port simplifies loading the new project without network infrastructure. Typical retrofit projects include old textile winders, injection mold controllers and food-processing lines. Budget for a new 24 VDC feed if the original panel ran on AC, and confirm the 22V-26V input tolerance against the machine's supply sag during motor starts.
Recommended
HVAC and Building Automation Panels
In building mechanical rooms - air handling units, chillers, boiler rooms - the TG765S-UT provides a local setpoint and status terminal for facility technicians. The 7-inch resistive touchscreen supports zone temperature screens, schedule editors and alarm logs; serial RS-485 links the HMI to the DDC controller, and the DC 24V supply is commonly already available in HVAC cabinets for actuators and transmitters. Consumption around 200 mA adds negligible load to the 24V budget. The USB-A flash disk port lets facility engineers clone a validated configuration across dozens of identical air handlers without touching a PC per unit. For networked supervision, select the TG765S-ET sibling which adds Ethernet; the UT is optimal where local operation only is required, keeping panel cost and wiring minimal.
Recommended
Test Benches and Laboratory Equipment
Custom test rigs, endurance benches and QC stations benefit from the TG765S-UT's combination of a readable 7-inch display and low integration cost. Engineers build pass/fail screens, live measurement readouts and operator prompts in TouchWin Editor; the HMI exchanges results and start commands with the bench PLC or motion controller over RS-232/422/485. The USB-B port supports rapid project iteration during bench development, while USB-A flash disks carry firmware-config sets between lab and production copies of the same rig. The ultra-thin chassis mounts flush on bench fronts or 19-inch rack adapters. Because the platform is shared with the wider TG765 family, a prototype built around the TG765-UT (standard depth, bench-friendly) can migrate to the slim TG765S-UT for the production enclosure with only a project recompile.
Recommended
Recommended Products Summary
Engineering reference data for TG765S-UT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | TG765-UT | TG765S-MT | TG765S-ET | TG765S-XT |
|---|---|---|---|---|---|
| Brand | XINJE | XINJE | XINJE | XINJE | XINJE |
| Package / Form Factor | 7-inch ultra-thin panel-mount HMI | 7-inch standard-depth panel-mount HMI | 7-inch ultra-thin panel-mount HMI - same | 7-inch ultra-thin panel-mount HMI - same | 7-inch ultra-thin panel-mount HMI - same |
| Display Resolution | 800 x 480 pixels (7 inch) | 800 x 480 pixels (7 inch) | 800 x 480 pixels (7 inch) | 800 x 480 pixels (7 inch) | 800 x 480 pixels (7 inch) |
| Serial Ports (232/422/485) | Yes | Yes | Yes | Yes | Yes |
| USB Configuration | USB-B download + USB-A flash disk | USB-B download + USB-A flash disk | MT download port (no UT USB pair) | ET configuration with Ethernet | XT configuration |
| Supply Voltage | DC 24 V (22 V - 26 V) | DC 24 V (22 V - 26 V), 200 mA | DC 24 V | DC 24 V | DC 24 V |
| Programming Software | XINJE TouchWin Editor | XINJE TouchWin Editor - same project platform | XINJE TouchWin Editor | XINJE TouchWin Editor | XINJE TouchWin Editor |
| Enclosure Depth | Ultra-thin (S series) | Standard depth | Ultra-thin - same | Ultra-thin - same | Ultra-thin - same |
Key Differentiators
- Ultra-thin chassis for shallow cabinets (vs TG765-UT)
- USB flash-disk field updates (vs TG765S-MT)
- Lowest-cost variant in the 7-inch family (vs TG765S-ET)
Design Notes
Power the TG765S-UT from a regulated DC 24V supply and keep the input within the DC 22V to DC 26V window specified for the TG765 family (NEX Instrument lists ~200 mA consumption for the 7-inch TG765-UT). Do not share this feed with contactors, solenoids or VFD dynamic-braking circuits: inductive load switching can pull the rail outside tolerance and reset the HMI mid-cycle. Estimated: a 24 V / 0.2 A load is only ~4.8 W, so a standard 24 V / 1 A DIN-rail supply comfortably powers HMI plus PLC with margin, but verify voltage sag during large motor starts.
Confirm the variant code before ordering: within the 7-inch TG765 range, the suffix encodes the port set - UT (USB-B download + USB-A flash disk), MT, ET (Ethernet) and XT. A panel specified for USB flash-disk project transfer will lose that feature if an MT variant is substituted. Also distinguish the ultra-thin S-series chassis (TG765S-UT) from the standard-depth TG765-UT: both fit the same display cutout but differ in behind-panel depth, which matters for shallow cabinet doors. All variants are programmed with the same TouchWin Editor.
For serial wiring (RS-232/422/485), use shielded twisted-pair cable and terminate RS-485 runs with a 120 ohm resistor at both bus ends; route serial cables away from VFD output cables and relay harnesses inside the cabinet. Mount the HMI with the supplied screws/fixing brackets to the gasketed panel cutout to preserve front-panel sealing. Leave service clearance behind the ultra-thin chassis for the serial and USB connectors, and keep the USB-A port accessible if field project updates via flash disk are part of the maintenance plan.
The TG765S-UT is a fanless HMI with low power consumption (manufacturer listing cites low power consumption and stable performance). Estimated: at ~4.8 W dissipation for a 200 mA / 24 V load, the ultra-thin S chassis relies on natural convection through its rear surface - do not wrap the rear housing in foam or mount it against an insulating surface. In sealed outdoor or high-ambient cabinets, verify the enclosure internal temperature against the datasheet operating range and add ventilation or a cooling unit if solar gain pushes ambient above specification.
Compliance Information
Compliance data was not stated in the retrieved web sources for the TG765S-UT. Consult the official XINJE datasheet or XINJE directly for RoHS/REACH declarations.