Texas Instruments

THS1030CDW - 10-Bit 30-MSPS ADC | Texas Instruments

MPN: THS1030CDW ✗ End of Life
3 V to 5.5 V Vdss 28-pin SOIC Package
MOQ: 1 |

THS1030CDW Overview

The Texas Instruments THS1030CDW is a 10-bit, single-channel, pipelined CMOS analog-to-digital converter capable of 30 MSPS conversion throughput. The device accepts a 3 V to 5.5 V supply, provides a parallel 10-bit output interface, and is packaged as a 28-pin SOIC in a tube. Its operating temperature range is 0°C to 70°C for the commercial-grade ordering code.

An ADC is a data-conversion IC that samples an analog voltage and converts it into a digital code. The THS1030 belongs to the CMOS ADC hierarchy, which combines analog sampling circuitry, quantization, reference handling, and digital output logic in one semiconductor package. Pipelined converters overlap several conversion stages, allowing a new conversion to begin before the previous result is fully transferred.

The THS1030CDW provides one analog input, a 10-bit resolution, and a throughput rate of 30 million samples per second. Its parallel interface exposes the converted result directly as digital lines, avoiding a serial data-transfer bottleneck during high-rate sampling. The device supports external and internal reference arrangements, while standby and output-enable controls help manage operating states and downstream circuitry.

This architecture is appropriate for signal-chain designs requiring predictable sampling throughput and direct parallel integration. The 10-bit result provides 1,024 representable codes, making the converter suitable for measurement, waveform capture, communications, industrial control, and embedded instrumentation where greater resolution is not required. The parallel outputs can connect directly to a microcontroller, DSP, FPGA, or data-capture logic when timing and pin-count constraints permit.

Typical deployments include communications receivers, industrial data acquisition, audio and control-signal processing, medical instrumentation, and general-purpose digital signal acquisition. A 30 MSPS rate supports substantial real-time analysis, while the single-channel architecture simplifies analog routing when the system does not require simultaneous sampling.

PCB design should prioritize a short, controlled analog input path, solid reference routing, and low-impedance connections between the converter and the digital receiver. Provide local supply bypassing and keep high-current digital return paths away from the analog and reference pins. Confirm output timing against the clocking scheme and the receiver’s acquisition requirements before fixing the system architecture.

This page combines the device’s operating characteristics with practical placement guidance, interface considerations, and an explicit drop-in replacement assessment. The alternatives analysis distinguishes true pin-compatible substitutions from faster converters housed in incompatible packages, helping engineers avoid board-level rework.

Drop-in alternatives for THS1030CDW — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

THS1030CDW Maximum Ratings & Electrical Characteristics

ADC Resolution 10 bit
Conversion Rate 30 MSPS
Number of Inputs 1 input
Architecture Pipelined
Supply Voltage Range 3 V to 5.5 V
Output Interface 10-bit parallel
Converter Technology CMOS
Reference Type External, internal
Package 28-pin SOIC
Mounting Type Surface mount
Operating Temperature 0°C to 70°C
Temperature Grade Commercial
Sampling Ratio 1:1
Number of A/D Converters 1 converter
Package Shape Rectangular
Terminal Form Gull wing
Packaging Quantity Tube

THS1030CDW rectangular Pin Configuration Guide

Pin configuration for THS1030CDW (rectangular package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

rectangular package pinout diagram for THS1030CDW

No detailed pinout data available for THS1030CDW.

Refer to the datasheet for full pin configuration.

Typical Applications

THS1030CDW is suitable for 6 applications: Communications Signal Acquisition, Industrial Data Acquisition, Waveform Monitoring, Audio and Control Signal Processing, Medical and Diagnostic Instrumentation, Embedded DSP and FPGA Front Ends.

🌐

Communications Signal Acquisition

The THS1030CDW is suitable for single-channel communications front ends that require 10-bit samples at up to 30 MSPS. Its parallel interface can deliver each 1,024-code result directly into DSP, FPGA, or microcontroller capture logic, avoiding serial-transfer overhead. The analog input and reference network should present a stable sample during the converter’s acquisition interval. Because only one channel is present, a time-division multiplexer is required for simultaneous reception of multiple inputs. Interface timing, input settling, and reference noise determine practical signal-chain performance.

🏭

Industrial Data Acquisition

The THS1030CDW can serve as the conversion stage in a single-channel industrial acquisition system. A 30-MSPS sampling rate supports rapid measurement sequences, while the 10-bit parallel result can be captured by a programmable logic device or embedded controller. Condition the sensor output before the ADC so its bandwidth and settling behavior satisfy the sampling rate. Use isolated, regulated supply and reference arrangements where process-control equipment requires predictable noise performance. The commercial 0°C to 70°C grade matches many factory-floor systems without an extended-temperature requirement.

📺

Waveform Monitoring

The THS1030CDW is applicable to waveform monitoring when one analog signal must be observed at a high sample rate. A 30-MSPS throughput allows the system to capture short events and analyze amplitude and timing behavior, while the 10-bit resolution provides 1,024 output codes. The parallel bus can feed an FPGA or DSP memory interface with deterministic timing. Probe, analog-front-end, and reference design quality will strongly affect apparent resolution; digital capture alone cannot recover information lost through input overloading, insufficient settling, or reference noise.

🎧

Audio and Control Signal Processing

The THS1030CDW can sample a conditioned audio or control waveform at 30 MSPS and provide the result to digital signal-processing logic through its parallel interface. The 10-bit converter is appropriate for supervisory, feedback, or diagnostic channels where 1,024 quantization levels provide adequate detail. It is not inherently a high-fidelity audio converter, so the input amplifier, anti-alias filter, reference, and clock arrangement determine usable signal quality. Use the standby and output-enable functions to coordinate conversion with the surrounding signal-processing system.

💊

Medical and Diagnostic Instrumentation

The THS1030CDW can support a single fast diagnostic channel in medical instrumentation when its 0°C to 70°C commercial rating and 30-MSPS throughput fit the system. The 10-bit parallel result may be processed by an FPGA or DSP for filtering, timing analysis, or feature extraction. A medical design must add the required isolation, protection, calibration, and safety architecture around the converter. The ADC should operate only behind a defined analog front end, with reference monitoring and input-range controls ensuring that biological or diagnostic signals remain within the converter’s valid range.

🖥️

Embedded DSP and FPGA Front Ends

The THS1030CDW is well matched to embedded DSP and FPGA acquisition blocks that can accept a 10-bit parallel bus. A 30-MSPS conversion rate supports real-time processing while avoiding the serial interface overhead of a lower-bandwidth output. The receiver must capture the conversion result using the correct clock and data-valid relationship, and the PCB must keep clock jitter, return-path noise, and ground bounce under control. Because the converter is obsolete, verify availability, component condition, and long-term obsolescence risk before finalizing a new embedded platform.

What are the key specifications of THS1030CDW that engineers should know?
The THS1030CDW is a 10-bit, single-channel, 30-MSPS pipelined CMOS ADC with a parallel output interface and a 3 V to 5.5 V supply range. According to the manufacturer datasheet, the converter operates from 0°C to 70°C and is packaged in a 28-pin SOIC. Its one-to-one sampling architecture and 1,024-code digital result make it appropriate for high-speed acquisition where serial-interface overhead would be undesirable.
What is the conversion speed of the THS1030CDW?
The THS1030CDW converts at 30 MSPS, or 30 million analog samples per second. This throughput comes from its pipelined CMOS architecture, which divides the conversion process into overlapping stages. The rate is useful for communications, waveform analysis, and data-acquisition systems that need direct parallel output rather than a serial link. Interface timing still depends on the clock and receiver implementation.
What is the resolution and interface of THS1030CDW?
The THS1030CDW provides 10-bit resolution through a parallel interface. Ten bits allow 1,024 digital codes across the converter’s full-scale range. According to the Texas Instruments datasheet, the converter is a single-input pipelined ADC with internal or external reference capability. Parallel output suits systems in which a microcontroller, DSP, FPGA, or capture logic can accept the conversion result directly.
What supply voltage does THS1030CDW use?
The THS1030CDW operates from a 3 V to 5.5 V analog supply, as specified by Texas Instruments. This range supports both 3.3 V and 5 V system architectures, although the external clock, reference, and digital interface levels must match the selected rail. Place the supply-bypass capacitors close to the device’s supply and ground pins to limit switching noise at the converter.
Where can I download the THS1030CDW datasheet PDF?
The official Texas Instruments THS1030 datasheet PDF is available at https://www.ti.com/lit/ds/symlink/ths1030.pdf. Use the manufacturer document for the complete pin-description table, timing diagrams, electrical characteristics, reference arrangements, and application circuit. The THS1030CDW ordering code identifies the commercial-temperature, 28-pin SOIC version packaged in a tube.
Where is the THS1030CDW pinout located?
The THS1030CDW pinout is shown in the Texas Instruments THS1030 datasheet, together with the pin-description table and application diagrams. The converter uses a 28-pin SOIC and includes parallel data lines, clocking, standby, output-enable, reference-sense, analog-input, supply, and ground functions. Assign every connection from the manufacturer pin table so that exposed-pad and no-connect details are handled correctly.
Is THS1030CDW suitable for a 30-MSPS data-acquisition system?
Yes, the THS1030CDW is suitable for a single-channel data-acquisition system operating at up to 30 MSPS. Its 10-bit parallel output enables direct transfer of 1,024-code conversion results into suitable digital logic. The analog front end must provide adequate input bandwidth, settling time, and reference integrity. Confirm acquisition timing and logic levels before selecting the complete signal chain.
What can replace THS1030CDW?
A valid THS1030CDW replacement must use the same 28-pin SOIC footprint, preserve the parallel-interface pin arrangement, and remain within the target’s critical voltage, resolution, and throughput requirements. Faster devices such as the 40-MSPS THS1030CPW and ADS825-series converters are not automatic drop-in replacements because their 28-pin TSSOP or SSOP packages differ from the SOIC footprint. Use the Request a Quote form for current replacement sourcing.
Is THS1030CDW the same as THS1030CPW?
No. The THS1030CDW is a 30-MSPS, 10-bit converter in a 28-pin SOIC, while the THS1030CPW is identified as a 40-MSPS, 10-bit converter in a 28-pin TSSOP package. Because the physical packages and lead geometry differ, THS1030CPW is not a pin-to-pin drop-in substitute for an existing THS1030CDW footprint. It can serve as a functional alternative only when the PCB and interface are redesigned.
THS1030CDW vs ADS825E - which is better for a parallel ADC design?
The THS1030CDW provides 10-bit resolution at 30 MSPS in a 28-pin SOIC, whereas the ADS825E is identified in the comparison material as a 10-bit, 40-MSPS converter in a 28-pin SSOP package. The ADS825E offers higher throughput but does not match the SOIC land pattern. Choose it only if the board can be redesigned and its complete electrical and timing requirements are accepted.
When should I choose THS1030CDW over a faster 40-MSPS converter?
Choose the THS1030CDW when the system needs no more than 30 MSPS and must preserve an existing 28-pin SOIC layout. It provides 10-bit resolution, a parallel interface, and a single analog input. A 40-MSPS converter may improve acquisition headroom, but a different package such as TSSOP or SSOP requires new routing, placement, and assembly planning. Select based on required throughput as well as package compatibility.
Is THS1030CDW suitable for communications and DSP applications?
Yes, the THS1030CDW fits communications and DSP front ends that require a 10-bit, 30-MSPS single-channel conversion stage. Its parallel output can feed DSP or FPGA logic without a serial-output bottleneck. Performance depends on the complete path: the analog input must settle within the sampling interval, the reference must remain stable, and the digital receiver must satisfy the converter’s output timing.
How should the THS1030CDW analog input be routed on a PCB?
Route the analog input as a short, controlled-impedance trace and keep it away from clock and high-current digital nets. Provide a low-noise, stable reference and place input and bypass components close to their associated pins. A solid ground plane and careful return-path arrangement reduce conversion error. For the exact pin and recommended application network, follow the Texas Instruments THS1030 datasheet.
What is the lifecycle status of THS1030CDW?
The THS1030CDW is listed as obsolete. Texas Instruments no longer promotes it as a current catalog selection, so new designs should confirm lifecycle implications before committing to it. For an existing supported PCB, use the Request a Quote form on this page to request availability and an appropriate lifecycle-aware replacement assessment. Do not assume a similarly named converter is pin compatible.
Where can I buy THS1030CDW, and what are its price and lead time?
The THS1030CDW is an obsolete Texas Instruments converter, so current commercial availability may be limited. Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for the exact 28-pin SOIC tube ordering code. The form allows an engineer to evaluate authenticity, condition, and obsolescence risk before placing an order.

Engineering reference data for THS1030CDW — comparison, design guidance, and compliance information.

Selection Guide

Choose the THS1030CDW when maintaining an existing 28-pin SOIC board, sampling one analog channel at up to 30 MSPS, and requiring a 10-bit parallel output. Its defining advantage is not the highest conversion rate, but compatibility with a specific footprint and established surrounding circuitry. The THS1030CPW offers 40 MSPS but requires a TSSOP footprint and updated timing design. The ADS825E also reaches 40 MSPS but uses a different 28-pin SSOP package. None is a true drop-in replacement for THS1030CDW. For a new design, weigh the obsolescence risk against current converters rather than copying the old architecture. For an existing assembly, verify exact pin assignments, timing, reference voltage, supply sequencing, component condition, and availability before approving any substitute.

Comparison with Alternatives

Parameter This Product
Package 28-pin SOIC
Brand Texas Instruments
Resolution 10 bit
Conversion Rate 30 MSPS
Number of Inputs 1 input
Architecture Pipelined
Output Interface 10-bit parallel
Supply Voltage Range 3 V to 5.5 V
Operating Temperature 0°C to 70°C
Lifecycle Status Obsolete

Key Differentiators

  • Established 30-MSPS conversion rate (vs THS1030CPW)
  • Direct compatibility with a 28-pin SOIC footprint (vs THS1030CPW)
  • Single-channel, 10-bit parallel conversion (vs ADS825E)

Design Notes

Route the analog input, reference, and supply-return paths away from the 10-bit parallel output and clock nets. Keep the input trace short, use a continuous ground reference, and place input conditioning, reference bypass, and supply-decoupling components close to their associated pins. The manufacturer datasheet’s typical application layout is the preferred starting point because pin-specific return paths materially affect conversion performance.

Treat the clock as a critical high-speed signal even though the converter is only 10-bit. Use a low-jitter source, provide a continuous return path beneath the clock route, and avoid coupling the clock net parallel to the analog input. Confirm the receiver’s setup and hold requirements against the timing diagrams before assigning buffers or registers. Incorrect edge placement can reduce the usable acquisition time and introduce conversion-dependent errors.

Bypass each supply connection directly to the appropriate ground plane with the capacitor values and placement shown in the Texas Instruments THS1030 datasheet. Keep the analog reference and signal ground currents away from digital return paths. Because the converter is a 3 V to 5.5 V device, verify that clock, reference, and digital logic levels remain compatible at the chosen supply voltage and during power sequencing.

Do not substitute the THS1030CPW or an ADS825-series converter directly on a THS1030CDW board. Their 28-pin TSSOP or SSOP packages do not match the 28-pin SOIC footprint, and their 40-MSPS timing characteristics are not identical. Use the manufacturer pinout and timing diagrams to identify package differences, and qualify any board-level replacement for reference noise, output timing, acquisition time, and power sequencing.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The operating temperature indicates a commercial-grade part, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable to this commercial-temperature ordering code.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

THS1030CDW datasheet THS1030CDW pinout THS1030CDW datasheet pdf THS1030CDW specifications THS1030CDW equivalent THS1030CDW replacement THS1030CDW price THS1030CDW stock Texas Instruments THS1030CDW THS1030CDW 30 MSPS ADC THS1030CDW 28 pin SOIC THS1030CDW vs THS1030CPW THS1030CDW application circuit THS1030CDW schematic 10-bit 30 MSPS parallel ADC

Related Components & Terms

Texas Instruments THS1030CDW THS1030 THS1030CPW ADS825E ADS823 analog-to-digital converter ADC pipelined ADC CMOS ADC single-channel ADC parallel interface 10-bit resolution 30 MSPS sample-and-hold reference voltage standby control output enable 28-pin SOIC SOIC package surface-mount package semiconductor data acquisition digital signal processing FPGA
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details