THS1030IDW - 10-Bit 30-MSPS ADC | Texas Instruments
MPN: THS1030IDW ✓ ActiveTHS1030IDW Overview
An analog-to-digital converter is an interface IC that converts continuous voltage signals into digital codes for processing by logic, DSP, FPGA, or microcontroller systems. Within the broader hierarchy, the THS1030IDW is a sampling ADC, a data-converter IC, and a member of the semiconductor category. Its 10-bit resolution represents each sampled input with 1,024 discrete levels, while its 30-MSPS conversion rate supports high-speed signal acquisition.
The principal benefits are a 30 MSPS sampling rate, 10-bit resolution, and configurable analog input architecture. Differential nonlinearity of ±0.3 LSB helps characterize conversion-code consistency, while 57 dB SNR and 60 dB SFDR establish dynamic performance for signal-chain designs. Power-down operation can reduce consumption when acquisition is inactive, and TLC876 pin compatibility supports migration from that interface family.
The THS1030 uses a pipelined CMOS architecture, with the conversion process divided into stages that support high throughput. The parallel output interface exposes the digital result across the package, while the analog section accepts either a single-ended or differential source. The adjustable internal voltage reference provides a common reference for the conversion system, and the out-of-range indicator provides an explicit signal when an input moves beyond the selected conversion range.
Typical uses include industrial control and instrumentation, communications signal acquisition, medical monitoring, imaging, radar, and test-and-measurement equipment. The 30 MSPS throughput is useful for sampling waveforms or intermediate-frequency signals, while configurable input mode allows the converter to serve both grounded single-ended sources and balanced differential front ends. The 28-pin SOIC package is also suitable for conventional surface-mount PCB assembly.
Designers should treat analog input routing, reference stability, digital timing, and power-supply decoupling as separate high-priority concerns. Maintain the voltage and timing limits stated by the manufacturer datasheet, use a low-noise analog ground strategy, and place bypass capacitors close to the supply pins. Because the converter has a parallel output interface, account for data setup and hold timing at the receiving logic.
This page combines the manufacturer's core converter characteristics with pin-package, application, selection, and replacement guidance. It also distinguishes genuine drop-in options from package or reel-code variants that cannot be treated as interchangeable without engineering review.
Drop-in alternatives for THS1030IDW — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesTHS1030IDW Maximum Ratings & Electrical Characteristics
| ADC Type | Pipelined CMOS analog-to-digital converter |
| Resolution | 10 bit |
| Sampling Rate | 30 MSPS |
| Number of Channels | 1 channel |
| Input Configuration | Single-ended or differential |
| Supply Voltage Range | 3 V to 5.5 V |
| Differential Nonlinearity | ±0.3 LSB |
| Signal-to-Noise Ratio | 57 dB |
| Spurious-Free Dynamic Range | 60 dB |
| Output Interface | Parallel |
| Reference | Adjustable internal voltage reference |
| Out-of-Range Indicator | Yes |
| Power-Down Mode | Yes |
| Interface Compatibility | Pin compatible with TLC876 |
| Operating Temperature Range | -40 °C to +85 °C |
| Temperature Grade | Industrial |
| Package | 28-pin SOIC |
| Mounting Type | Surface mount |
| Terminal Form | Gull wing |
THS1030IDW 28-pin soic Pin Configuration Guide
Pin configuration for THS1030IDW (28-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for THS1030IDW.
Refer to the datasheet for full pin configuration.
Typical Applications
THS1030IDW is suitable for 6 applications: Communications Signal Acquisition, Industrial Control and Instrumentation, Medical Monitoring, Imaging and Video Capture, Test and Measurement, Power and Battery Monitoring.
Communications Signal Acquisition
The THS1030IDW is suitable for digitizing intermediate-frequency or baseband communications signals when the system needs 30 MSPS throughput and 10-bit resolution. Its configurable single-ended or differential input lets the same converter interface with balanced receiver chains or single-ended driver outputs. The parallel digital output supports direct capture by FPGA or logic, while 57 dB SNR and 60 dB SFDR provide useful dynamic-performance limits. Clock jitter, input bandwidth, reference stability, and digital timing remain the principal system considerations when establishing reliable acquisition at the maximum sampling rate.
Recommended
Industrial Control and Instrumentation
The THS1030IDW can digitize rapidly changing sensor or control signals in industrial instrumentation because it supports 30 MSPS sampling in a 3 V to 5.5 V supply range. Its differential input option reduces sensitivity to common-mode disturbance when paired with balanced sensor front ends, while single-ended operation simplifies lower-cost measurement channels. The 10-bit result and out-of-range indication provide a practical basis for thresholding and process-control decisions. Designers should budget conversion latency, define external clocking, and isolate noisy actuator and switching paths from the analog input network.
Recommended
Medical Monitoring
The THS1030IDW is applicable to medical monitoring front ends when the required signal bandwidth and resolution fit its 30 MSPS, 10-bit conversion capability. Differential input can support balanced bio-signal amplifier outputs, while the 57 dB SNR and ±0.3 LSB differential nonlinearity characterize the converter's signal integrity. The parallel output can feed an FPGA or embedded processor for filtering and feature extraction. A production medical design must separately address patient protection, isolation, leakage, electromagnetic compatibility, alarm behavior, and the regulatory quality process applicable to the finished instrument.
Recommended
Imaging and Video Capture
The THS1030IDW can serve as a video digitization element in imaging systems requiring a 10-bit, 30 MSPS parallel-interface ADC. The converter supports single-ended or differential analog input, allowing selection according to the image-sensor output architecture and analog front end. Its 60 dB SFDR and adjustable internal reference help define the usable signal-to-distortion budget, while the out-of-range indicator can flag overload conditions. System design must account for sensor timing, horizontal and vertical blanking intervals, black-level offset, clock distribution, and pixel-data latency.
Recommended
Test and Measurement
The THS1030IDW is appropriate for waveform digitization, automated test equipment, and laboratory instruments requiring 30 MSPS sampling with a 10-bit parallel output. The input architecture can support either a single-ended source or a differential driver, while the adjustable reference allows the analog range to be aligned with the measured signal. The 57 dB SNR and 60 dB SFDR are useful for setting realistic acquisition expectations. Front-end bandwidth, anti-alias filtering, clock accuracy, grounding, trigger coordination, and calibration determine whether system-level accuracy approaches the converter's intrinsic performance.
Recommended
Power and Battery Monitoring
The THS1030IDW can capture rapidly changing power-system voltages when a 10-bit, 30 MSPS measurement path is sufficient. Differential input is useful for sensing across a shunt or bridge with common-mode voltage, and single-ended input can monitor a conditioned feedback node. The converter's power-down mode can support intermittent acquisition, while the out-of-range indicator helps identify overload conditions. Calibration, isolation, input protection, reference behavior, and the 3 V to 5.5 V supply requirement must be addressed before using the part for protection or safety-critical decisions.
Recommended
Recommended Products Summary
Engineering reference data for THS1030IDW — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Package | 28-pin SOIC |
| Brand | Texas Instruments |
| Resolution | 10 bit |
| Maximum Sampling Rate | 30 MSPS |
| Number of Channels | 1 channel |
| Input Configuration | Single-ended or differential |
| Supply Voltage Range | 3 V to 5.5 V |
| Differential Nonlinearity | ±0.3 LSB |
| Signal-to-Noise Ratio | 57 dB |
| Spurious-Free Dynamic Range | 60 dB |
| Output Interface | Parallel |
| Operating Temperature Range | -40 °C to +85 °C |
Key Differentiators
- 30 MSPS throughput in a 10-bit converter (vs TLC876)
- Selectable single-ended or differential analog input (vs TLC876)
- Integrated acquisition-status and control features (vs TLC876)
Design Notes
Place the required input, reference, and supply bypass components close to their associated THS1030IDW pins and follow the manufacturer datasheet's recommended layout. Keep analog-input traces short, controlled-impedance, and away from clock and high-current digital paths. Use a continuous ground reference under the device and separate noisy return currents from the converter and reference ground connections.
Treat the external clock and parallel output bus as controlled timing interfaces. Route clock traces away from analog inputs, use a low-jitter source, account for output setup and hold requirements, and terminate or appropriately condition buses where their topology requires it. Verify acquisition timing at the receiving FPGA or logic rather than relying only on the nominal 30 MSPS converter rate.
Operate the converter only within the specified 3 V to 5.5 V supply range and apply the manufacturer's recommended bypass network. Check analog and digital supply sequencing and ensure that power-down transitions do not leave external clocks or connected logic in an undefined interface state. Use the datasheet's current and timing limits to size the supply and verify startup behavior over the complete operating range.
Do not treat THS1030IDWR as a distinct drop-in alternative: it is the tape-and-reel ordering form of the same device. Also do not treat the 28-TSSOP THS1030CPWR as a board-level drop-in for the 28-SOIC THS1030IDW. Verify footprint, pin assignment, input range, clock polarity, output timing, reference voltage, acquisition latency, and power sequencing before approving any substitution.
Compliance Information
The industrial temperature grade and -40 °C to +85 °C operating range are identified, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration was present in the verified information.