Texas Instruments

THS1041IPW - 10-Bit 40-MSPS ADC with PGA | Texas Instruments

MPN: THS1041IPW ✓ Active
3 V Vdss 28-pin TSSOP Package
MOQ: 1 |

THS1041IPW Overview

The Texas Instruments THS1041IPW is a single-channel, 10-bit pipelined analog-to-digital converter with a 40 MSPS sampling rate, programmable gain amplifier, and internal precision clamp, housed in a 28-pin TSSOP package. It operates from a nominal 3 V supply over a -40 °C to +85 °C temperature range and supports parallel digital output.

An ADC is a data-converter IC that transforms a continuously varying analog voltage into a digital code. In the semiconductor hierarchy, the THS1041IPW is an ADC, a data converter, and an integrated circuit used for signal acquisition. Its 40 MSPS conversion rate makes it suitable for capturing waveforms and sensor signals whose relevant information changes rapidly, while the 10-bit resolution provides 1,024 possible digital codes per conversion.

The principal features include one analog input, pipelined conversion, 40 MSPS throughput, a parallel output interface, a programmable gain amplifier, and an internal precision clamp. The reported differential nonlinearity is 1 LSB, while integral nonlinearity is 1.5 LSB. These specifications characterize the converter's code accuracy against an ideal transfer function and help determine whether a particular sensor or acquisition system can preserve meaningful amplitude information.

The parallel architecture presents each conversion result across dedicated digital output pins rather than using a serial link. This reduces the amount of data that must be transferred during each 25 ns conversion interval and can simplify capture into suitable digital logic or embedded processing hardware. The programmable gain stage allows the analog signal to be scaled before digitization, potentially improving use of the converter's 10-bit code range.

Typical applications include industrial process monitoring, instrumentation, embedded control, data acquisition, and sensor measurement. The 40 MSPS sampling capability supports waveform observation and rapid event capture, while the -40 °C to +85 °C industrial temperature range supports equipment operating across extended industrial environments.

PCB implementation should prioritize short, controlled analog-input routing, solid supply decoupling, and a quiet return path for the parallel output bus. Because the converter uses a parallel interface at 40 MSPS, trace length matching and output-buffer timing deserve attention in high-speed acquisition designs.

This page combines the Texas Instruments device characteristics, verified distributor information, package guidance, practical design considerations, and clearly qualified drop-in alternatives. It also identifies which replacement claims require board-level and signal-integrity verification before production release.

Drop-in alternatives for THS1041IPW — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with THS1041IPW (same form factor and footprint) — differing in Package, Architecture, Operating Temperature Range.

Texas Instruments
Package: 28-pin TSSOP (PW)
Architecture: Pipelined
Operating Temperature Range: 0C to +70C (commercial grade)
Compare with THS1041IPW →
Texas Instruments
Package: 28-TSSOP (PW), 4.40 mm body width
Architecture: Pipelined
Compare with THS1041IPW →

THS1040IPW

✅ Drop-In
📦 28-pin TSSOP
Same 10-bit resolution, 40 MSPS rate, 3 V nominal supply, and 28-pin TSSOP footprint; headline ratings differ by 0%.

📋 Reference alternative (not in catalog)

THS1041CPWR

✅ Drop-In
📦 28-pin TSSOP
Same 10-bit resolution, 40 MSPS rate, and 28-pin TSSOP family; the ordering and temperature-grade codes differ while headline electrical ratings remain equal.

📋 Reference alternative (not in catalog)

THS1040CPWRG4

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
10 bit · 1 Input · 40 MSPS · Pipelined · 3 V · 3 V · Single-ended or Differential · ±0.45 LSB (typ)

Contact for price

View Datasheet →

THS1041IPW Maximum Ratings & Electrical Characteristics

Resolution 10 bit
Maximum Sampling Rate 40 MSPS
Channel Count 1 channel
Architecture Pipelined ADC
Analog Input Type 1 analog input
Output Interface 10-bit parallel output
Programmable Gain Amplifier Included
Internal Precision Clamp Included
Nominal Supply Voltage 3 V
Differential Nonlinearity 1 LSB
Integral Nonlinearity 1.5 LSB
Operating Temperature Range -40 °C to +85 °C
Package 28-pin TSSOP
Power Class Low-power ADC
Shipping Package Tube
Conversion Interval at 40 MSPS 25 ns

THS1041IPW tube Pin Configuration Guide

Pin configuration for THS1041IPW (tube package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

tube package pinout diagram for THS1041IPW

No detailed pinout data available for THS1041IPW.

Refer to the datasheet for full pin configuration.

Typical Applications

THS1041IPW is suitable for 6 applications: Industrial Sensor Measurement, High-Speed Data Acquisition, Waveform and Transient Monitoring, Test and Measurement Instrumentation, Embedded Control Systems, Communication and RF Monitoring.

🏭

Industrial Sensor Measurement

The THS1041IPW fits industrial sensor acquisition when a rapidly changing analog signal must be converted into 10-bit digital data. Its 40 MSPS sampling rate captures the input every 25 ns, while the programmable gain amplifier can scale a sensor output to use more of the converter's 1,024-code range. This is useful for pressure, position, vibration, and current-sensing front ends that require more timing margin than a low-rate general-purpose ADC. The parallel output also reduces the serial-data burden on the acquisition controller. Designers should set the gain and input bandwidth together, maintain short analog traces, and verify that the complete sensor-to-converter path does not introduce noise or aliasing outside the intended measurement band.

🖥️

High-Speed Data Acquisition

The THS1041IPW is appropriate for data-acquisition systems that need rapid conversion and direct parallel capture rather than a slow serial ADC interface. At 40 MSPS, the device produces a 10-bit result every 25 ns, enabling synchronized sampling of repetitive or transient waveforms. The 28-pin TSSOP package also supports compact instrumentation compared with many older high-speed converters. A practical implementation should account for output timing skew, board-routing delay, and acquisition-controller setup time. Use short, length-conscious digital routes, provide local bypass capacitance, and test the complete sampling chain for aperture-related error when accurate phase information is required.

📈

Waveform and Transient Monitoring

The 40 MSPS throughput of the THS1041IPW makes it useful for observing waveforms whose important features evolve quickly. A 10-bit conversion provides 1,024 amplitude levels, allowing the system to retain more detail than a 1-bit or coarse threshold detector. The internal precision clamp can help manage input overdrive, while the programmable gain stage can adapt the signal scale for a particular transducer. For transient monitoring, define the analog bandwidth before the anti-alias filter so that components outside the intended band do not fold into the sampled record. Confirm clamp behavior, recovery time, and settling behavior against the Texas Instruments datasheet for the specific input conditions.

🔧

Test and Measurement Instrumentation

The THS1041IPW can serve as the sampling element in laboratory and field instrumentation that evaluates changing analog quantities. Its single-channel architecture supports one signal at 40 MSPS, while the parallel digital output can feed logic, a buffer, or an embedded processor. The -40 °C to +85 °C operating range permits use across industrial ambient conditions when the rest of the instrument supports that range. For bench equipment, pay particular attention to reference and supply stability because converter linearity cannot compensate for analog-node instability. The 1 LSB DNL and 1.5 LSB INL ratings should be included in the uncertainty budget alongside resistor tolerances, comparator or amplifier offsets, and calibration error.

🧩

Embedded Control Systems

The THS1041IPW supports embedded control applications that need rapid sampling of an analog control or feedback variable without using a serial ADC protocol. The parallel 10-bit output can be connected to suitable digital logic or captured by a controller with dedicated input resources, and the 40 MSPS rate provides substantial timing margin over ordinary control-loop update rates. Programmable gain helps normalize different sensor ranges, although the selected gain must remain compatible with the converter's input limits. Embedded designers should avoid relying on nominal sampling rate alone; the analog front end, anti-alias filter, and controller timing must be analyzed together to prevent saturation, aliasing, or inaccurate data interpretation.

🌐

Communication and RF Monitoring

The THS1041IPW can be used for envelope, detector, or supervisory monitoring in communication equipment where a fast transient must be observed. Its 40 MSPS sampling capability offers much more temporal resolution than a low-rate instrumentation ADC, while the 10-bit parallel code supports direct digital evaluation. For RF-related measurements, place the converter behind the appropriate gain, filtering, and detector stages rather than connecting a high-frequency RF node directly. The key design trade-off is bandwidth versus resolution: 10-bit data does not guarantee 10-bit system accuracy if the analog path is noisy or nonlinear. Characterize the front end at the intended signal level and ensure the digital capture system can accept the converter's parallel output timing.

What is the conversion speed of the THS1041IPW?
The THS1041IPW converts at up to 40 MSPS, corresponding to a 25 ns interval between conversion results. According to the Texas Instruments datasheet listing, the device is a 10-bit, single-input pipelined ADC with a parallel output interface. This throughput is suitable for high-speed signal acquisition, waveform capture, and instrumentation when the source bandwidth and capture hardware can operate at the same rate.
What is the resolution and accuracy of the THS1041IPW?
The THS1041IPW provides 10-bit resolution, equivalent to 1,024 digital output codes per conversion. The Texas Instruments datasheet listing reports 1 LSB differential nonlinearity and 1.5 LSB integral nonlinearity. Differential nonlinearity describes code-width deviation from the ideal step, while integral nonlinearity describes deviation across the full transfer curve; both are important when evaluating small-signal measurement fidelity.
What features does the THS1041IPW include?
The THS1041IPW includes one analog input, a programmable gain amplifier, an internal precision clamp, a pipelined conversion architecture, and a 10-bit parallel output. The Texas Instruments datasheet identifies the device as a low-power 10-bit, 40 MSPS ADC. The gain stage can scale the incoming signal before conversion, while the precision clamp helps control overdrive behavior when the input exceeds the selected operating range.
What is the supply voltage of the THS1041IPW?
The THS1041IPW operates from a nominal 3 V supply. According to the verified Texas Instruments product descriptions, it is a 3 V, 10-bit, 40 MSPS low-power ADC in a 28-pin TSSOP package. Use the manufacturer datasheet's absolute-maximum and recommended operating-condition tables when designing the supply rails and decoupling network.
Where can I download the THS1041IPW datasheet PDF?
The THS1041IPW datasheet PDF is available through the Texas Instruments document listing linked in the product data, with a manufacturer-file mirror also listed on AllDataSheet. The manufacturer document is the preferred source for pin descriptions, recommended application circuits, timing diagrams, absolute-maximum ratings, and electrical characteristics. Use the PDF revision linked from the current Texas Instruments product page when approving a released design.
Where can I find the THS1041IPW pinout?
The THS1041IPW pinout is found in the pin-configuration table and package drawing in the Texas Instruments datasheet. The device is specified in a 28-pin TSSOP package with a parallel digital interface. Before routing a PCB, assign every power, ground, analog-input, clock, control, and data-output pin directly from the datasheet's numbered package diagram rather than inferring functions from signal names.
Is the THS1041IPW suitable for industrial sensor measurement?
The THS1041IPW is suitable for many industrial measurement systems because it combines 10-bit resolution, a 40 MSPS sampling rate, a programmable gain amplifier, and an operating range of -40 °C to +85 °C. According to the Texas Instruments datasheet listing, the device is specifically positioned for sensor measurement and data-acquisition applications. Verify the individual sensor bandwidth, required conversion latency, and system noise before finalizing the design.
What is the difference between THS1041IPW and THS1040IPW?
The THS1041IPW and THS1040IPW are closely related 10-bit, 40 MSPS, 28-pin TSSOP ADCs, and the cross-reference information identifies the THS1040IPW as a direct replacement with consistent terminals and packages. Their headline resolution, sampling rate, and nominal 3 V supply are unchanged, producing a 0% difference in those headline ratings. Review the manufacturer datasheets for pin-level timing and feature details before substitution.
When should I choose the THS1041IPW instead of another ADC?
Choose the THS1041IPW when the design needs one high-speed analog channel, 10-bit resolution, a 40 MSPS sampling rate, programmable gain, an internal precision clamp, and a 28-pin TSSOP footprint. It is particularly useful when parallel data capture is preferable to a serial interface. Choose another ADC if the application requires greater resolution, more channels, a different sampling rate, or an interface that better matches the system architecture.
Can THS1040IPW replace THS1041IPW without changing the PCB?
The THS1040IPW can be considered as a drop-in candidate because the verified comparison data identifies consistent terminals and packages and describes the THS1040IPW as a 28-TSSOP, 10-bit, 3 V ADC with matching performance characteristics. Its headline ratings match the THS1041IPW at 10 bits, 40 MSPS, and 3 V. Final approval still requires checking every pin, timing parameter, supply sequence, and acquisition-calibration requirement.
What can replace the THS1041IPW?
The THS1040IPW is the clearest pin-compatible replacement candidate identified for the THS1041IPW because both use a 28-pin TSSOP package and share 10-bit, 40 MSPS, and 3 V headline specifications. The THS1041CPWR is another same-package family candidate, with temperature-grade and ordering-code differences requiring review. Confirm the exact manufacturer datasheet for both parts before treating either as a production replacement.
Where can I buy THS1041IPW online and check stock?
Use the Request a Quote form on this page to ask about THS1041IPW availability, current lead time, and order handling. The form is the appropriate channel for a quote-based sourcing workflow and avoids publishing a stale stock count. Product identification should include the complete THS1041IPW ordering code, including its package and temperature-grade suffix.
What is the price of THS1041IPW?
The current THS1041IPW price depends on quantity, supply, and order configuration, so use the Request a Quote form on this page for a current quotation. Include the required quantity, shipment destination, and whether the part may be supplied in the stated tube packaging. The structured offer information on this page is updated from the current sourcing response rather than relying on an outdated historical catalog amount.
What is the lead time for THS1041IPW?
Submit the required quantity and delivery schedule through the Request a Quote form on this page to obtain the current THS1041IPW lead time. Lead time can change with supplier inventory and order volume, so it should be confirmed for each procurement event. Include the target shipment date and packaging preference in the request to obtain an actionable schedule.
Is THS1041IPW currently in stock?
Current THS1041IPW stock status should be confirmed through the Request a Quote form on this page rather than inferred from a distributor search page. Provide the required quantity and target delivery date so the sourcing team can return an availability commitment. For production planning, confirm whether any manufacturer lead time or lot-allocation constraint applies.
What are the key specifications of THS1041IPW that engineers should know?
The key THS1041IPW specifications are 10-bit resolution, 40 MSPS throughput, one analog input, a programmable gain amplifier, an internal precision clamp, a pipelined architecture, 10-bit parallel output, nominal 3 V operation, 1 LSB DNL, 1.5 LSB INL, and a -40 °C to +85 °C range. The device is packaged in a 28-pin TSSOP. These parameters place the part in the low-power, high-speed ADC category for industrial instrumentation and sensor acquisition.

Engineering reference data for THS1041IPW — comparison, design guidance, and compliance information.

Selection Guide

Choose the THS1041IPW for a single-channel, 10-bit acquisition system requiring up to 40 MSPS, parallel output, programmable gain, and an internal precision clamp in a 28-pin TSSOP package. It is well suited to industrial sensors, instrumentation, embedded measurement, and transient monitoring where the analog front end has already been bandwidth-limited. The THS1040IPW is the closest verified drop-in candidate when its equivalent 10-bit, 40 MSPS, 28-pin TSSOP characteristics satisfy the system, but the complete electrical tables must still be checked. Consider THS1041CPWR or THS1040CPWR when their exact ordering and temperature-grade codes fit production requirements. These are all same-package TI candidates, not cross-brand equivalents. If a design requires more than 10-bit resolution, multiple simultaneous channels, a serial interface, or substantially different sampling rate, move to a different ADC family rather than forcing a pin-compatible replacement.

Comparison with Alternatives

Parameter This Product THS1040IPW THS1041CPWR THS1040CPWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Resolution 10 bit 10 bit 10 bit 10 bit
Maximum Sampling Rate 40 MSPS 40 MSPS 40 MSPS 40 MSPS
Channel Count 1 channel 1 channel 1 channel 1 channel
Architecture Pipelined ADC Pipelined ADC Pipelined ADC Pipelined ADC
Nominal Supply Voltage 3 V 3 V 3 V 3 V
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C

Key Differentiators

  • Matches the verified 10-bit and 40 MSPS ratings of the THS1040IPW while retaining a programmable gain amplifier and internal precision clamp (vs THS1040IPW)
  • Provides a 40 MSPS, 10-bit parallel conversion function in a 28-pin TSSOP package (vs THS1041CPWR)
  • Combines single-channel acquisition with programmable gain and overdrive control (vs THS1040CPWR)

Design Notes

Route the analog input as a short, controlled-impedance trace directly to the converter. Place the input network, anti-alias filter, and local supply bypass components close to the relevant THS1041IPW pins, while keeping the parallel digital outputs away from the analog input. At 40 MSPS, even a small mismatch among clock and data routes can create sampling-point error, so use a consistent ground plane and avoid stubs or unnecessary vias in the acquisition path.

Treat the 10-bit parallel bus as a synchronous high-speed interface. Confirm output timing, clock requirements, and capture-device setup margins in the Texas Instruments datasheet, then match the PCB data traces to the same clock source where required. If the bus is long or noisy, use a register, latch, or dedicated capture device to reconstruct each conversion. Do not route the parallel outputs adjacent to the sensitive analog input without a grounded isolation strategy.

Provide a stable nominal 3 V rail and place the recommended bypass capacitors close to the supply and ground pins. Check the datasheet's supply-voltage tolerance, absolute-maximum limits, and power-up behavior before adding sequencing logic. Because the internal clamp and programmable gain stage respond to analog overdrive, verify that input transients cannot exceed the device ratings during startup, shutdown, or fault conditions.

Do not assume that a 40 MSPS converter can capture arbitrary bandwidth without an analog filter. Set the analog bandwidth below the Nyquist region, evaluate the programmable gain against the maximum input voltage, and include DNL, INL, offset, noise, and reference accuracy in the measurement uncertainty. When substituting a related ADC, compare the complete pin descriptions, timing diagrams, clamp behavior, and recommended application circuit rather than checking only resolution and sampling rate.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The -40 °C to +85 °C industrial operating range does not by itself establish AEC-Q100 qualification. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was found for the exact MPN.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

THS1041IPW datasheet THS1041IPW pinout THS1041IPW datasheet pdf THS1041IPW specifications THS1041IPW equivalent THS1041IPW replacement THS1041IPW vs THS1040IPW THS1041IPW 28-TSSOP footprint THS1041IPW price THS1041IPW stock Texas Instruments THS1041IPW THS1041IPW sensor measurement THS1041IPW data acquisition THS1041IPW cross reference

Related Components & Terms

Texas Instruments THS1041IPW THS1040IPW THS1041CPWR THS1040CPWR analog-to-digital converter ADC pipelined ADC data converter integrated circuit semiconductor programmable gain amplifier PGA internal precision clamp parallel output 10-bit resolution 40 MSPS differential nonlinearity integral nonlinearity nominal 3 V supply TSSOP-28 TSSOP package family surface-mount package industrial sensor measurement data acquisition
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details