NXP Semiconductors

TJA1028T/5V0/20/1J - 5V LIN Transceiver with 70mA Regulator

MPN: TJA1028T/5V0/20/1J ✓ Active
70 mA Id 8-pin SOIC Package
MOQ: 1 |

TJA1028T/5V0/20/1J Overview

NXP Semiconductors TJA1028T/5V0/20/1J is a LIN bus transceiver with an integrated 5.0 V low-dropout voltage regulator, a maximum regulator output current of 70 mA, and a 20 kbit/s LIN data rate in an 8-pin SOIC package. It is designed for compact Local Interconnect Network nodes that need both bus communication and a local 5 V supply.

A LIN transceiver is an integrated bus interface that combines a physical-layer transmitter and receiver with the logic-level control and status functions required by Local Interconnect Network nodes. The TJA1028 belongs to the LIN transceiver hierarchy within vehicle and industrial interface semiconductors, while its internal regulator makes it a Mini System Basis Chip for space-constrained LIN nodes.

The device complies with LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. Its 5.0 V regulator variant can supply up to 70 mA, allowing external circuitry such as sensors, logic, or communication interfaces to use the same local supply. The 20 kbit/s bus rate matches conventional LIN application rates, while the integrated regulator reduces the number of discrete components required in compact modules.

The TJA1028 is designed to withstand high voltages present on a LIN bus and provides strong electrostatic-discharge performance for robust vehicle electronics. These protections are particularly important because LIN cables can connect remote nodes through long harness runs where external transients and electrostatic discharge events are more likely. The integrated regulator also requires correct input and output capacitors to maintain stable voltage regulation and acceptable transient performance.

Typical applications include LIN slave nodes in automotive body modules, seat and door controllers, climate-control submodules, sensor interfaces, lighting modules, and industrial LIN gateways. A 20 kbit/s communication rate is suitable for low-bandwidth command and status traffic rather than high-speed data transfer. The 5 V output is appropriate for low-power sensors, small controllers, logic blocks, and peripheral circuits that operate within the regulator's 70 mA capability.

For a robust PCB implementation, route the LIN connection away from sensitive analog paths, use the recommended ground-plane connection, and place the regulator input and output capacitors close to their associated pins. Confirm the external load current, bus termination strategy, wake-up requirements, and fault-management behavior against the manufacturer datasheet. Do not exceed the regulator or transceiver limits when adding external loads.

This page combines the verified TJA1028T/5V0/20/1J specifications with package guidance, application-oriented circuit considerations, and confirmed drop-in alternatives. It also provides a practical comparison for engineers evaluating replacements without changing the SO-8 PCB footprint.

Drop-in alternatives for TJA1028T/5V0/20/1J — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

TJA1028DT

✅ Drop-In
📦 8-pin SOIC
Functionally identical 5 V, 70 mA, 20 kbit/s LIN function; newer preferred SOI3+ process and modified package bill of materials

📋 Reference alternative (not in catalog)

TJA1028T/5V0/20/1

✅ Drop-In
📦 8-pin SOIC
Same 5 V, 70 mA, 20 kbit/s TJA1028T function; final ordering-code details differ by 0% in the identified functional ratings

📋 Reference alternative (not in catalog)

SIT1028Q

✅ Drop-In
📦 8-pin SOIC
Same integrated 5 V LDO and 20 kbit/s LIN function with pin-compatible placement; AEC-Q100 qualification is specified for the alternative

📋 Reference alternative (not in catalog)

TJA1028T/5V0/20/1J Specifications

Product Type LIN transceiver with integrated low-drop voltage regulator
LIN Bus Standard LIN 2.0
LIN Bus Standard LIN 2.1
Automotive Network Compliance SAE J2602
LIN Compliance ISO 17987-4:2016, 12 V
Integrated Regulator Output 5.0 V
Regulator Maximum Output Current 70 mA
LIN Data Rate 20 kbit/s
Package 8-pin SOIC
Mounting Type Surface mount
Automotive Qualification AEC-Q100 qualified

TJA1028T/5V0/20/1J 8-pin soic Pin Configuration Guide

Pin configuration for TJA1028T/5V0/20/1J (8-pin soic package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

8-pin soic package pinout diagram for TJA1028T/5V0/20/1J

No detailed pinout data available for TJA1028T/5V0/20/1J.

Refer to the datasheet for full pin configuration.

Typical Applications

TJA1028T/5V0/20/1J is suitable for 6 applications: Automotive LIN Sensor Node, Vehicle Body Control Module, Door and Seat Control Module, Climate Control Submodule, Industrial LIN Gateway, LED and Lighting Control Module.

🚗

Automotive LIN Sensor Node

TJA1028T/5V0/20/1J fits a compact automotive LIN sensor node because it combines a 20 kbit/s LIN interface with a 5.0 V regulator capable of supplying up to 70 mA. The node can use the integrated regulator for a compatible sensor, signal-conditioning circuit, or digital control logic without adding a separate LDO. LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 support makes it appropriate for standardized 12 V vehicle networks. The principal design constraint is total regulated load: sensor peaks, pull-ups, indicators, and logic must remain within the 70 mA regulator capability while maintaining valid LIN timing.

🚗

Vehicle Body Control Module

A body-control module can use TJA1028T/5V0/20/1J as a compact LIN node interface when the module needs command and status communication at 20 kbit/s. The integrated 5 V regulator serves low-power local logic or interface sections with up to 70 mA available, reducing board area compared with separate LIN transceiver and regulator arrangements. Automotive compliance support and the AEC-Q100-qualified ordering option are useful for vehicle programs. Engineers should account for regulator headroom, vehicle-bus transients, ESD protection, and startup sequencing before finalizing the body-module schematic.

🚗

Door and Seat Control Module

TJA1028T/5V0/20/1J is well suited to door, seat, and switch modules where a low-bandwidth LIN branch controls distributed functions. The 20 kbit/s interface supports command traffic for motors, switches, indicators, or position sensors, while the 5 V regulator can power lightweight control electronics up to a 70 mA combined load. Integrating both blocks into one SO-8 device reduces component count, routing, and enclosure space. The implementation must include suitable bus and ground protection, and it must preserve LIN timing margins across temperature and supply variation.

🏭

Climate Control Submodule

TJA1028T/5V0/20/1J can serve as the LIN interface in a climate-control submodule that exchanges setpoint, status, and fault information over a 20 kbit/s bus. Its integrated 5 V, 70 mA regulator is useful for local signal conditioning, logic, or communications circuits where a separate regulator would consume additional board area. The 12 V LIN compliance and AEC-Q100-qualified option support use in harsh vehicle environments. Designers should verify the regulator's behavior during startup, load transients, and loss of battery while ensuring that the external load does not exceed the stated 70 mA capability.

🏭

Industrial LIN Gateway

TJA1028T/5V0/20/1J can be used at the node side of an industrial LIN gateway when a compact interface must communicate with low-speed sensors or actuators. The 20 kbit/s data rate matches conventional LIN command traffic, and the integrated 5 V regulator can supply local interface electronics with a combined budget of up to 70 mA. Compliance with LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 provides a defined bus-compatibility basis. For industrial equipment, validate the exact temperature range, galvanic-environment requirements, grounding strategy, and protection needed for the installation wiring.

💡

LED and Lighting Control Module

TJA1028T/5V0/20/1J fits a compact LED or lighting command module when the LIN node carries configuration or status data rather than high-bandwidth video. The 20 kbit/s bus supports switch commands, brightness-state reporting, and diagnostic information, while the 5 V regulator can support compatible control logic up to 70 mA. Keeping the interface and local supply in one 8-pin SOIC simplifies compact lighting assemblies. Ensure that LED drivers, indicator currents, and any logic loads are included in the regulator budget, or use a separate supply when their demand exceeds what the integrated regulator can support.

Recommended Products Summary

TJA1028DT Functionally identical NXP 5 V LIN system-basis option Used in: Automotive LIN Sensor Node, Vehicle Body Control Module, Door and Seat Control Module, Climate Control Submodule, Industrial LIN Gateway, LED and Lighting Control Module SIT1028Q Pin-compatible integrated-LDO LIN transceiver Used in: Automotive LIN Sensor Node, Door and Seat Control Module, Climate Control Submodule, Industrial LIN Gateway TJA1028T/5V0/20/1 Same-family 5 V LIN transceiver Used in: Vehicle Body Control Module, LED and Lighting Control Module
What is TJA1028T/5V0/20/1J?
TJA1028T/5V0/20/1J is an NXP Semiconductors LIN transceiver with an integrated 5.0 V low-drop voltage regulator in an 8-pin SOIC package. It supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. According to the NXP TJA1028 datasheet, the regulator can deliver up to 70 mA, allowing the device to support local sensors, logic, or peripheral circuitry.
What are the key specifications of TJA1028T/5V0/20/1J?
The principal TJA1028T/5V0/20/1J specifications are a 5.0 V integrated regulator output, up to 70 mA of regulator current, a 20 kbit/s LIN data rate, and an 8-pin SOIC package. The NXP datasheet also identifies LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 compliance. These characteristics place it in the Mini System Basis Chip category for compact 12 V LIN nodes.
Where can I download the TJA1028T/5V0/20/1J datasheet PDF?
The official TJA1028T/5V0/20/1J datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1028.pdf. It is the preferred document for pin descriptions, electrical characteristics, application information, recommended external components, bus timing, and regulator operating conditions. The NXP product page for TJA1028T provides an additional entry point for lifecycle and ordering information.
Where can I find the TJA1028T/5V0/20/1J pinout?
Use the pin-description table in the official NXP TJA1028 datasheet to assign PCB tracks for TJA1028T/5V0/20/1J. The component is an 8-pin SOIC device, but individual terminal names and alternate-function details should be taken directly from that document before layout release. The manufacturer datasheet is also the authority for exposed-lead geometry, grounding, and test-point access.
Can TJA1028T/5V0/20/1J replace a standalone LIN transceiver and LDO?
Yes, TJA1028T/5V0/20/1J can consolidate a LIN physical-layer transceiver and a 5 V local regulator when the load current is within 70 mA and the required electrical behavior matches. The integration reduces component count and PCB area. It does not eliminate the need to check startup, transient response, capacitor selection, bus protection, and the total regulator load against the manufacturer limits.
Is TJA1028T/5V0/20/1J suitable for automotive LIN nodes?
TJA1028T/5V0/20/1J is suitable for 12 V automotive LIN applications because it supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016. The part is identified as AEC-Q100 qualified, and the manufacturer describes strong ESD performance and tolerance of high LIN-bus voltages. Production designs should still verify the exact operating-temperature grade and transient requirements.
TJA1028T/5V0/20/1J vs SIT1028Q — which is better for an automotive LIN node?
TJA1028T/5V0/20/1J and SIT1028Q are both described as pin-compatible Mini LIN system-basis devices with an integrated 5 V regulator and 20 kbit/s operation. The TJA1028 is supported by NXP documentation covering LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016, while the SIT1028Q is identified as AEC-Q100 qualified. Choose TJA1028 when NXP device documentation is preferred; evaluate SIT1028Q when its qualification and supply details meet the vehicle program.
What is the difference between TJA1028T/5V0/20/1J and TJA1028DT?
TJA1028T/5V0/20/1J and TJA1028DT are functionally identical according to NXP community information, but TJA1028DT uses the newer preferred SOI3+ process and a modified package bill of materials. The legacy TJA1028T/5V0/20 is not recommended for new designs, making TJA1028DT preferable for new SO-8 projects when procurement and qualification conditions are acceptable.
When should I choose TJA1028T/5V0/20/1J over TJA1028DT?
Choose TJA1028T/5V0/20/1J when maintaining an existing qualified 12 V LIN-node design requires continuity with the legacy TJA1028T family. Choose TJA1028DT for new designs because NXP identifies it as based on the preferred SOI3+ process and states that the older TJA1028T/5V0/20 is not recommended for new designs. Both provide a 5 V regulator, up to 70 mA, and 20 kbit/s LIN operation.
Is TJA1028T/5V0/20/1J suitable for a LIN sensor node?
TJA1028T/5V0/20/1J is suitable for a compact LIN sensor node when the combined load current remains at or below the regulator's 70 mA maximum. The 20 kbit/s LIN rate accommodates typical command and status traffic, while the integrated 5 V regulator can power compatible sensors and logic. Verify startup behavior, bus wake-up requirements, capacitor values, and the sensor's peak current.
What can replace TJA1028T/5V0/20/1J?
SIT1028Q is the clearest confirmed drop-in alternative for TJA1028T/5V0/20/1J because it is described as a pin-compatible Mini LIN system-basis chip with an integrated 5 V LDO and 20 kbit/s data rate. TJA1028DT is another same-package NXP option for functionally identical 5 V operation. Confirm qualification, lifecycle, temperature range, electrical limits, and PCB compatibility before substitution.
What is the best NXP equivalent for TJA1028T/5V0/20/1J?
TJA1028DT is the preferred NXP functional equivalent for TJA1028T/5V0/20/1J in new SO-8 designs. NXP information describes the devices as functionally identical while identifying TJA1028DT with the newer preferred SOI3+ process and modified package bill of materials. Existing production designs may retain the legacy TJA1028T/5V0/20/1J, subject to lifecycle and qualification review.
Where can I buy TJA1028T/5V0/20/1J online?
Use the Request a Quote form on this page to request TJA1028T/5V0/20/1J availability, lead time, and ordering support. The part is an 8-pin SOIC LIN transceiver with an integrated 5 V regulator rated to 70 mA. For a production purchase, identify the required quantity, shipment date, and any automotive qualification or traceability documentation your program requires.
What is the price of TJA1028T/5V0/20/1J?
The current commercial terms for TJA1028T/5V0/20/1J should be requested through the Request a Quote form on this page. The listing identifies the component as an 8-pin SOIC LIN transceiver with an integrated 5 V, 70 mA regulator and 20 kbit/s operation. A formal quote can reflect quantity, stock position, delivery schedule, and any required inspection or traceability documentation.
What is the lead time and stock status of TJA1028T/5V0/20/1J?
Request the current lead time and stock allocation for TJA1028T/5V0/20/1J through the Request a Quote form on this page. Provide the annual usage, forecast horizon, order quantity, and target delivery date so scheduling can reflect your actual production plan. The part is manufactured by NXP Semiconductors and is distributed in an 8-pin SOIC package.

Engineering reference data for TJA1028T/5V0/20/1J — comparison, design guidance, and compliance information.

Selection Guide

Choose TJA1028T/5V0/20/1J for a 12 V LIN node requiring a documented 5 V, 70 mA integrated regulator, 20 kbit/s communication, and an 8-pin SOIC footprint. It is particularly appropriate when an existing automotive design is already qualified around the legacy TJA1028T family. For new production designs, TJA1028DT is generally the stronger NXP choice because it is functionally identical but uses the preferred SOI3+ process; the legacy family is not recommended for new designs according to NXP. Consider SIT1028Q when an alternative supplier is acceptable and its AEC-Q100 qualification, electrical characteristics, lifecycle, and production traceability meet the program requirements. For any substitution, verify the regulator-current budget, bus limits, temperature grade, ESD rating, external capacitors, wake-up behavior, and exact PCB compatibility.

Comparison with Alternatives

Parameter This Product TJA1028DT TJA1028T/5V0/20/1 SIT1028Q
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors CoreChips
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Product Type LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator Mini LIN system-basis chip with integrated LDO
Integrated Regulator Output 5.0 V 5.0 V 5.0 V 5.0 V
LIN Data Rate 20 kbit/s 20 kbit/s 20 kbit/s 20 kbit/s

Key Differentiators

  • Integrated 5 V regulator supports local node electronics (vs SIT1028Q)
  • Preferred-process option exists for new designs (vs TJA1028T/5V0/20/1J)
  • Broad documented LIN-standard support (vs SIT1028Q)

Design Notes

Use the manufacturer pin-description table in the NXP TJA1028 datasheet when routing the 8-pin SOIC footprint. Place the recommended regulator input and output capacitors adjacent to their pins, provide a low-impedance ground connection, and route the LIN conductor away from sensitive analog or high-speed digital paths. Keep the exposed copper, solder mask, land pattern, and pin-1 orientation consistent with the selected package drawing.

Budget the complete load against the integrated regulator's 70 mA maximum, including sensor peaks, logic, pull-ups, and indicators. Verify startup, line-dropout, load-transient, and thermal behavior under the intended 12 V automotive or industrial supply conditions. Do not use the 5 V output as an unrestricted general-purpose rail when external circuitry can draw more than the regulator rating.

A LIN bus can experience external electrostatic discharge and wiring transients even when the transceiver is integrated with a regulator. Apply the protection and grounding arrangement specified by NXP, avoid long unprotected branches, and observe the device's maximum bus-voltage limits. Also confirm that a proposed replacement maintains the 5 V output, 20 kbit/s data rate, regulator-current capability, pin functions, and automotive qualification status.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The ordering listing identifies TJA1028T/5V0/20/1J as AEC-Q100 qualified. The NXP datasheet identifies compliance with LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current product documentation.

Related Searches

tja1028t datasheet TJA1028T/5V0/20/1J datasheet TJA1028T/5V0/20/1J datasheet pdf TJA1028T/5V0/20/1J pinout TJA1028T/5V0/20/1J equivalent TJA1028T/5V0/20/1J replacement TJA1028T/5V0/20/1J price TJA1028T/5V0/20/1J stock NXP TJA1028T/5V0/20/1J TJA1028T/5V0/20/1J vs TJA1028DT TJA1028T/5V0/20/1J SO-8 footprint TJA1028T/5V0/20/1J LIN sensor node

Related Components & Terms

NXP Semiconductors TJA1028T/5V0/20/1J TJA1028DT TJA1028T/5V0/20/1 SIT1028Q CoreChips LIN transceiver LIN bus Local Interconnect Network Mini System Basis Chip integrated voltage regulator low-dropout regulator 5 V regulator 70 mA output current 20 kbit/s data rate SO-8 package surface-mount IC LIN 2.0 LIN 2.1 SAE J2602 ISO 17987-4:2016 AEC-Q100 electrostatic discharge automotive electronics industrial LIN gateway
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details