TLV2475CD - 4-Channel 6V 2.8MHz RRIO Op Amp | Texas Instruments
MPN: TLV2475CD ✓ ActiveTLV2475CD Overview
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high input impedance and low output impedance. The TLV2475 belongs to the CMOS operational-amplifier hierarchy and is intended for signal conditioning, voltage buffering, current-to-voltage conversion, filtering, and feedback control. Rail-to-rail inputs are useful when signals approach either supply rail, while rail-to-rail outputs improve output-voltage range under light or heavy loading.
Each amplifier channel consumes 600 µA and provides a 2.8 MHz gain-bandwidth product. The device also supports shutdown operation, has an input bias current of 2.5 pA, and is listed with a slew rate of 1.5 V/µs. These characteristics suit low-power sensor interfaces, portable instrumentation, audio signal paths, and industrial control systems where four independent analog channels reduce component count and simplify board allocation.
The TLV2475 family combines low-power biasing with rail-to-rail signal handling and high-drive outputs. Input bias current of 2.5 pA helps preserve the accuracy of high-impedance sensor interfaces, while the 2.8 MHz gain-bandwidth product supports moderate-frequency precision applications. The shutdown function can reduce power consumption when a subsystem is inactive, provided the application correctly handles shutdown behavior and signal states during transitions.
Typical uses include four-channel sensor acquisition, low-level signal conditioning, active filtering, voltage amplification, and buffer stages in portable measurement equipment. Because each channel is independent, the amplifier can also implement several unrelated analog functions on one package. Designers should still account for output settling, channel-to-channel behavior, load conditions, and the effect of shutdown timing when defining the system-level power sequence.
For layout, place input and feedback components close to the associated channel pins and route sensitive input traces away from digital and switching-current paths. Decoupling capacitors should be positioned near the supply pins, and unused amplifier inputs must be biased within the input common-mode range. The 16-pin SOIC footprint simplifies assembly, but thermal performance and stability should be checked against the actual output current and ambient temperature.
This page combines the manufacturer device description, exact catalog attributes, package information, replacement considerations, and practical design guidance. It also distinguishes verified pin-compatible alternatives from electrically similar devices that cannot be substituted without a PCB or functional change.
Drop-in alternatives for TLV2475CD — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with TLV2475CD (same form factor and footprint) — differing in Package.
TLV2475AIDR
✅ Drop-In📋 Reference alternative (not in catalog)
TLV2475IDR
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
TLV2475CD Maximum Ratings & Electrical Characteristics
| Number of Channels | 4 channels |
| Amplifier Type | CMOS operational amplifier |
| Maximum Supply Voltage | 6 V |
| Gain-Bandwidth Product | 2.8 MHz |
| Supply Current per Channel | 600 µA |
| Input Bias Current | 2.5 pA |
| Slew Rate | 1.5 V/µs |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Shutdown Support | Yes |
| Maximum Input Offset Voltage | 2200 µV |
| Package | 16-pin SOIC |
| Mounting Type | Surface mount |
TLV2475CD 16-pin soic Pin Configuration Guide
Pin configuration for TLV2475CD (16-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for TLV2475CD.
Refer to the datasheet for full pin configuration.
Typical Applications
TLV2475CD is suitable for 6 applications: Low-Power Sensor Signal Conditioning, Portable Instrument Front End, Active Filtering and Gain Stage, Industrial Current-Sense Conditioning, Audio and Communication Buffering, Power-Sequenced Control System.
Low-Power Sensor Signal Conditioning
The TLV2475CD is appropriate for conditioning outputs from high-impedance sensors because its 2.5 pA input bias current limits the error introduced by source impedance. Four channels can amplify or buffer several sensor signals in parallel, reducing board area in compact measurement systems. The 600 µA-per-channel supply current supports battery-operated operation, while rail-to-rail input capability improves signal utilization near the supply limits. The design must still verify the sensor's output range against the amplifier's common-mode limits and confirm output settling at the intended closed-loop gain.
Recommended
Portable Instrument Front End
The TLV2475CD can form the analog front end of a portable instrument that needs multiple low-power gain or buffer stages. Its 2.8 MHz gain-bandwidth product supports moderate-frequency measurement channels, and the four-channel 16-pin SOIC package reduces component count compared with separate single amplifiers. For portable equipment, the 600 µA per channel is a key efficiency consideration, while shutdown provides a way to control consumption during inactive intervals. Designers should include output settling time, load drive, and shutdown-state requirements in the signal-chain budget.
Recommended
Active Filtering and Gain Stage
The TLV2475CD is suitable for active filters and moderate-gain stages where four channels provide independent signal-processing paths. Its 2.8 MHz gain-bandwidth product must be considered alongside the required closed-loop gain and target phase margin, particularly when the amplifier drives a capacitive load. Rail-to-rail outputs improve usable signal swing in low-voltage systems, while rail-to-rail inputs help accept signals near the supply rails. Component tolerances, noise, and the amplifier's offset limits should be calculated together when setting filter gain and precision requirements.
Recommended
Industrial Current-Sense Conditioning
The TLV2475CD can amplify low-level voltage signals produced by current-sense networks in industrial or motor-control equipment. Rail-to-rail inputs help accommodate sensing schemes whose output lies close to ground, while the 2.8 MHz bandwidth provides margin for common-mode and filtering requirements above DC. The four channels allow simultaneous monitoring or multiple control-loop conditioning stages. Layout must keep the high-current shunt path away from the amplifier inputs, and system designers should verify common-mode transients, output swing, and supply behavior under the intended industrial conditions.
Recommended
Audio and Communication Buffering
The TLV2475CD is suitable for low-level audio or communication-signal buffering when four channels and modest bandwidth are sufficient. Rail-to-rail input and output operation improves signal range in low-voltage systems, while the 2.8 MHz gain-bandwidth product supports audio-frequency and control functions. High-drive output capability can simplify driving a moderate capacitive or resistive load. However, output noise, distortion, stability, and channel behavior should be evaluated against the signal amplitude and load, particularly when the input source is high impedance or the gain is set close to the amplifier's stable operating range.
Recommended
Power-Sequenced Control System
The TLV2475CD fits control systems that require several analog channels plus coordinated low-power operation. The common shutdown function can disable the amplifier section when the subsystem is inactive, helping reduce current beyond the normal 600 µA per channel. Rail-to-rail inputs and outputs are useful in mixed 3 V-to-6 V class rails, subject to the device's specified operating limits. Sequencing should be designed so shutdown does not expose downstream nodes to uncontrolled transients, and unused inputs should be biased within the valid common-mode range to prevent unstable behavior.
Recommended
Recommended Products Summary
Engineering reference data for TLV2475CD — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | TLV2475AIDR | TLV2475IDR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Number of Amplifier Channels | 4 channels | 4 channels | 4 channels |
| Process Technology | CMOS | CMOS | CMOS |
| Maximum Supply Voltage | 6 V | 6 V | 6 V |
| Gain-Bandwidth Product | 2.8 MHz | 2.8 MHz | 2.8 MHz |
| Supply Current per Channel | 600 µA | 600 µA | 600 µA |
| Input Bias Current | 2.5 pA | 2.5 pA | 2.5 pA |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Shutdown Function | Yes | Yes | Yes |
Key Differentiators
- Four independent low-power channels in one package (vs TLV2475AIDR)
- Rail-to-rail input and output operation (vs TLV2475AIDR)
- Shutdown support for subsystem power control (vs TLV2475IDR)
- Low input bias for high-impedance sources (vs TLV2475AIDR)
Design Notes
Place the supply-decoupling capacitor as close as practical to the device's supply and ground pins, and keep the connection loop short. For the 16-pin SOIC footprint, route sensitive input traces away from the supply pins and the pins associated with adjacent amplifier channels. Short feedback paths help preserve stability and bandwidth, while separating the shutdown control from sensitive analog inputs reduces coupling from digital control activity.
Account for the 2.8 MHz gain-bandwidth product when selecting the closed-loop gain and filter topology. High gain reduces bandwidth and phase margin, and capacitive loading can alter stability. Use feedback components with values appropriate for the target frequency, place them close to the relevant input and output pins, and verify the complete loaded circuit rather than assuming the amplifier will remain stable with every output load.
Do not leave an amplifier input floating. Every unused input must be biased within the valid input common-mode range, typically by connecting it to a defined low-impedance voltage near a valid rail. Also verify the maximum 6 V supply limit, rail-to-rail operating boundaries, output load, and shutdown state before power-up. These checks are especially important when the device operates from a battery or rail that can overshoot during transitions.
Estimated: with all four channels operating at a 6 V supply and 600 µA per channel, total supply current is approximately 2.4 mA and device power is approximately 14.4 mW. These are design estimates based on the specified 600 µA-per-channel current and maximum 6 V supply, not maximum power ratings. Recalculate for the actual supply voltage, channel state, and shutdown behavior used in the product.
Maintain a quiet analog ground path and place input-referenced components where they minimize parasitic pickup from surrounding circuitry. Because the input bias current is 2.5 pA, even a small input resistance can create a meaningful voltage offset, but high-value resistors can also increase thermal noise and susceptibility to board leakage. Select resistance values from the actual source impedance and environmental requirements rather than maximizing resistance indiscriminately.
Compliance Information
Compliance attributes were not stated in the available product and distributor results and therefore remain unknown.