WM8253SCDS/V - 16-Bit 6 MSPS CIS/CCD AFE | Cirrus Logic
MPN: WM8253SCDS/V ✓ ActiveWM8253SCDS/V Overview
An analog front end, or AFE, is the signal-conditioning and conversion section between an imaging sensor and the subsequent digital processing system. Its functional hierarchy is AFE → analog signal conditioner → ADC/ADC front end → semiconductor. In a CIS or CCD camera, the AFE conditions the sensor output and converts the resulting analog waveform into digital data. The WM8253SCDS/V combines a one-channel, 16-bit conversion path with the processing features needed for video-oriented imaging applications.
The device’s headline characteristics are its 16-bit conversion resolution, 6 MSPS operating rate, and single-channel architecture. The 4-bit wide output provides a compact digital interface between the AFE and downstream logic, while the 20-pin SSOP package supports surface-mount assembly. Its specified 132 mW power consumption is also an important consideration for thermally constrained camera modules and compact embedded imaging systems.
The WM8253SCDS/V is positioned for charge-coupled device and CMOS image sensor imaging rather than general-purpose standalone ADC use. A single converter channel makes it appropriate for designs where one sensor output is processed at a time and full multi-channel integration is not required. The 3.3 V operating voltage also places it alongside modern low-voltage digital imaging electronics, allowing the analog and digital portions of a camera design to operate within the same supply framework.
Typical applications include compact digital cameras, surveillance-camera imaging channels, industrial vision modules, and embedded CIS-based imaging systems. In these systems, the AFE accepts the sensor signal, performs analog conditioning and digitization, and presents a 4-bit-wide output to the associated image-processing or data-capture circuitry. A 6 MSPS conversion rate supports video-class signal capture, while the 16-bit representation preserves fine numerical detail from the analog stage.
Designers should verify the sensor interface requirements against the pin descriptions and recommended application circuit in the manufacturer datasheet before assigning signals. Pay particular attention to supply decoupling, analog grounding, clocking, data-output timing, and the distinction between SSOP pin numbering and the physical lead orientation. The 132 mW listed dissipation should also be checked against the module’s ambient temperature and available copper area.
This page organizes the manufacturer datasheet information, exact-MPN pricing evidence, package details, application guidance, and selection considerations into a practical engineering reference. It also distinguishes verified drop-in replacements from alternatives that cannot be confirmed as pin-compatible, helping designers avoid making a replacement decision from incomplete similarity data.
Drop-in alternatives for WM8253SCDS/V — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with WM8253SCDS/V (same form factor and footprint).
WM8253SCDS/RV
✅ Drop-InContact for price
View Datasheet →WM8253SCDS/V Maximum Ratings & Electrical Characteristics
| Product Type | Single-channel CIS/CCD analog front end |
| Converter Resolution | 16 bit |
| Number of Converters | 1 channel |
| Maximum Sampling Rate | 6 MSPS |
| Supply Voltage | 3.3 V |
| Power Consumption | 132 mW |
| Output Width | 4 bit |
| Supported Sensor Type | CIS and CCD |
| Application Category | Video analog front end |
| Package | 20-pin SSOP |
| Mounting Type | Surface mount |
| Order Code | WM8253SCDS/V |
| RoHS Status | Compliant |
WM8253SCDS/V 20-pin ssop Pin Configuration Guide
Pin configuration for WM8253SCDS/V (20-pin ssop package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for WM8253SCDS/V.
Refer to the datasheet for full pin configuration.
Typical Applications
WM8253SCDS/V is suitable for 6 applications: Compact Digital Camera, Surveillance Camera Imaging, Industrial Vision Module, CIS-Based Embedded Camera, CCD Camera Electronics, Machine Vision Sensor Interface.
Compact Digital Camera
The WM8253SCDS/V fits a single-channel CIS or CCD imaging path where the camera requires 16-bit conversion resolution and a 6 MSPS conversion rate from a 3.3 V supply. It can sit between the image sensor and downstream camera-processing electronics, conditioning the analog sensor output and providing a 4-bit-wide digital interface. The single-channel architecture is appropriate when only one sensor output is processed, while the 20-pin SSOP package supports compact surface-mount construction. Before finalizing the circuit, verify the sensor’s clocking, output coding, signal polarity, and required settling time against the manufacturer datasheet.
Recommended
Surveillance Camera Imaging
A surveillance camera can use the WM8253SCDS/V as a 3.3 V, single-channel AFE for a CIS or CCD sensor operating in a video-class signal chain. Its 6 MSPS conversion rate supports the listed video application, and the 16-bit conversion path provides greater numerical resolution than lower-resolution imaging front ends. The 4-bit-wide output offers a compact interface to the camera’s image-processing electronics. Design the analog input, clock, and data-output routing to minimize interference, then confirm synchronization and sensor-specific timing in the manufacturer datasheet.
Recommended
Industrial Vision Module
The WM8253SCDS/V is suitable for an industrial vision module that uses one CIS or CCD output channel and prioritizes compactness and 16-bit conversion resolution. Its 20-pin SSOP package, 3.3 V supply, 4-bit-wide output, and 6 MSPS operating rate fit a tightly integrated sensor interface. The listed 132 mW consumption should be included in the enclosure thermal assessment, particularly when the camera operates continuously alongside a processor. Validate the analog input range and timing with the selected sensor because the AFE must match the sensor’s output characteristics precisely.
Recommended
CIS-Based Embedded Camera
For an embedded CIS-based camera, the WM8253SCDS/V provides a 16-bit single-channel conversion path with a 6 MSPS maximum sampling rate. The device operates from 3.3 V and presents a 4-bit-wide output to the embedded image-processing stage, making it suitable for compact camera electronics. Its single-channel organization can simplify synchronization when only one sensor signal is required. PCB implementation should provide clean analog grounding, local supply decoupling, and controlled clock routing, with all signal assignments confirmed from the pin-description table in the manufacturer datasheet.
Recommended
CCD Camera Electronics
The WM8253SCDS/V can serve as the analog front end for a single CCD imaging channel when the system requires 16-bit conversion resolution and video-rate sampling. Its 6 MSPS operation, 3.3 V supply, and 4-bit-wide output fit a modern compact camera signal chain. Unlike a generic ADC, this device includes functions intended for CCD and CIS signal conditioning, so it should be evaluated against the sensor’s clocking scheme and signal interface. Validate gain, offset, clamping, and timing requirements from the manufacturer application information before layout release.
Recommended
Machine Vision Sensor Interface
A machine-vision camera interface can use the WM8253SCDS/V when the selected CIS or CCD provides one analog output and the downstream processor accepts a 4-bit-wide data interface. The 16-bit conversion resolution and 6 MSPS rate make the device appropriate for capturing detailed, video-class sensor data while keeping the analog front end compact. The 20-pin SSOP footprint reduces board area relative to many larger analog packages. Design for low-noise analog distribution, deliberate return paths, and short clock connections, and confirm that the sensor’s output coding is supported before committing the layout.
Recommended
Engineering reference data for WM8253SCDS/V — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Product Type | Single-channel CIS/CCD analog front end |
| Brand | Cirrus Logic |
| Package | 20-pin SSOP |
| Converter Resolution | 16 bit |
| Sampling Rate | 6 MSPS |
| Supply Voltage | 3.3 V |
| Power Consumption | 132 mW |
| Output Width | 4 bit |
| Number of Channels | 1 channel |
| Supported Sensors | CIS and CCD |
Key Differentiators
- Single-channel 16-bit imaging conversion (vs WM8253SCDS/RV)
- Video-class 6 MSPS conversion rate (vs WM8253SCDS/RV)
- Compact 4-bit-wide digital output (vs WM8253SCDS/RV)
Design Notes
Route the sensor input, clock, and analog supply connections away from digital output and processing signals. Keep the AFE close to the sensor or image connector so that sensitive analog traces remain short. Use a continuous ground reference beneath and around the device where the package drawing permits, and return sensor and digital currents to appropriate quiet and noisy ground regions. Confirm the exact SSOP pin orientation from the manufacturer datasheet before assigning PCB nets.
Place the required 3.3 V decoupling capacitors at the AFE supply pins using the values and topology specified in the manufacturer application circuit. Keep the supply path narrow enough to limit impedance but physically short to minimize transient voltage excursions. The listed 132 mW consumption must be checked against the maximum operating mode, ambient temperature, and available PCB copper. Do not use the single power figure as a substitute for a complete worst-case thermal calculation.
Do not treat a similar WM8253 order code as interchangeable without checking the manufacturer ordering table. The related WM8253SCDS/RV listing is associated with a different packing form, and the suffix may carry commercial or grade information in addition to packaging. Similarly, do not infer the pinout from a generic ADC diagram. Verify signal direction, supply pins, clocking, sensor-specific functions, and output timing directly against the exact MPN datasheet.
Account for the 6 MSPS conversion rate when routing the digital data outputs and clock signals. Use short point-to-point connections, avoid unnecessary stubs, and provide a nearby low-impedance return path for high-speed signals. If the 4-bit output connects to a processor or FPGA, confirm setup and hold timing, output drive capability, and clock phase from the timing tables. These checks are especially important when cable or connector transitions are present between the AFE and downstream logic.
Compliance Information
The exact-MPN distributor listing identifies the WM8253SCDS/V as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.