XC3S200A-4FT256C - 4032-Cell Spartan-3A FPGA | AMD Xilinx
MPN: XC3S200A-4FT256C ✗ End of LifeXC3S200A-4FT256C Overview
A field-programmable gate array is a reconfigurable digital integrated circuit whose logic, memory, signal processing, and I/O resources are configured after manufacture. Within the semiconductor hierarchy, an FPGA is a programmable logic device, while the Spartan-3A family occupies the low-to-medium density segment of the Xilinx product portfolio. It is intended for embedded systems requiring parallel processing, deterministic control, dedicated interfaces, or hardware-assisted data handling without the cost of a large application-specific integrated circuit.
Key features include support for 26 single-ended and differential I/O standards, including TMDS, PPDS, SSTL3 Class I and Class II, and full hot-swap compatibility. The 195 user I/Os make the part suitable for bridging external memory, programmable logic controllers, communications links, display interfaces, and general-purpose digital control. The Spartan-3A architecture also supports interface intellectual property for PCI, PCI Express, USB, FireWire, CAN, SPI, and I2C designs.
The XC3S200A-4FT256C operates from a 1.2 V core supply and is specified for the commercial temperature range of 0 °C to 85 °C. Its 256-ball package measures 17 mm by 17 mm and uses a square ball-grid layout. Configuration and programming are handled through the dedicated configuration interface described in the Spartan-3A family documentation, allowing the same hardware platform to be reprogrammed for multiple bitstreams.
Typical applications include industrial control and data-acquisition systems, video processing, network-interface adapters, industrial Ethernet equipment, display controllers, communications modules, and embedded storage systems. The combination of 4032 logic cells, 195 I/Os, and a 256-ball package provides substantial integration in a compact surface-mount footprint.
A key design consideration is that legacy FPGA availability and lifecycle status can constrain new production designs. Verify current sourcing, configuration-file support, toolchain compatibility, and the exact ball-grid layout before committing a board revision to this device. This page also consolidates technical specifications, drop-in alternatives, application guidance, and design notes for faster engineering evaluation.
Drop-in alternatives for XC3S200A-4FT256C — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC3S200A-4FT256C (same form factor and footprint) — differing in Package, Device Type, Logic Cells, Operating Temperature, Package Code.
XC3S200A-4FTG256C
✅ Drop-In📋 Reference alternative (not in catalog)
XC3S200A-4FTG256I
✅ Drop-InContact for price
View Datasheet →XC3S200A-5FT256C
✅ Drop-In📋 Reference alternative (not in catalog)
XC3S200AN-4FT256C
✅ Drop-In📋 Reference alternative (not in catalog)
XC3S200AN-4FTG256C
✅ Drop-In📋 Reference alternative (not in catalog)
XC3S200A-4FT256C Maximum Ratings & Electrical Characteristics
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-3A |
| Logic Cells | 4032 cells |
| Configurable Logic Blocks | 448 CLBs |
| System Gates | 200000 gates |
| User I/O | 195 I/O |
| Package | 256-ball FTBGA |
| Package Code | FT256 / LBGA |
| Package Dimensions | 17 mm x 17 mm |
| Terminal Count | 256 balls |
| Terminal Form | Ball |
| Mounting Type | Surface Mount |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -4 |
| Maximum Frequency | 667 MHz |
| Operating Temperature | 0 °C to 85 °C |
| I/O Standards Supported | 26 single-ended and differential standards |
| Supported Signaling Standards | TMDS, PPDS, SSTL3 Class I and Class II |
| Hot-Swap Support | Full hot-swap compliance |
| Interface IP Support | PCI, PCI Express, USB, FireWire, CAN, SPI, I2C |
| RoHS Status | Compliant |
| Lead-Free Status | Lead free |
XC3S200A-4FT256C 17 mm x 17 mm Pin Configuration Guide
Pin configuration for XC3S200A-4FT256C (17 mm x 17 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC3S200A-4FT256C.
Refer to the datasheet for full pin configuration.
Typical Applications
XC3S200A-4FT256C is suitable for 6 applications: Industrial Control and Data Acquisition, Video and Display Interface Processing, Communications and Network Interface Cards, Programmable Logic and Storage Controllers, Industrial Automation and Motion Control, Embedded Instrumentation and Signal Conditioning.
Industrial Control and Data Acquisition
The XC3S200A-4FT256C fits industrial controllers that must combine sequential logic, parallel sampling, and several external interfaces on one programmable device. Its 4032 logic cells and 195 user I/Os can support state machines, timing generation, data conditioning, and communication bridges without a separate processor for every function. The 1.2 V core supply simplifies power partitioning, while the commercial 0 °C to 85 °C rating covers typical factory environments. Verify every I/O standard against the actual sensor and actuator electrical requirements.
Recommended
Video and Display Interface Processing
The Spartan-3A device is well suited to display and video interface blocks because it supports TMDS, PPDS, and SSTL3 Class I and Class II signaling alongside differential I/O standards. The 195 user I/Os permit concurrent parallel pixel data, control, and auxiliary signal connections, and 4032 logic cells are sufficient for timing generation, format conversion, and limited pixel processing. A complete design should use the manufacturer's I/O and display interface IP and verify timing against the target panel specification.
Recommended
Communications and Network Interface Cards
With 195 user I/Os, the XC3S200A-4FT256C can implement parallel packet handling, channel multiplexing, clock-domain control, and protocol adaptation in communications equipment. Its supported standards and IP ecosystem include interfaces for PCI, PCI Express, USB, FireWire, CAN, SPI, and I2C, enabling a common FPGA fabric to serve multiple peripheral buses. The -4 speed grade targets moderate clock rates, so high-speed lanes should be checked against the selected I/O standard and timing constraints.
Recommended
Programmable Logic and Storage Controllers
The XC3S200A-4FT256C is appropriate for legacy programmable-logic designs that require deterministic control of external memory, bus arbitration, or accelerator logic. Its 448 configurable logic blocks and 4032 logic cells provide implementation space for address generation, command sequencing, error handling, and data-path registers. Engineers should confirm the supported external memory interface and selected I/O standard in the Spartan-3A documentation, then validate timing for the actual memory device rather than relying on nominal device frequency.
Recommended
Industrial Automation and Motion Control
The XC3S200A-4FT256C can consolidate encoder decoding, pulse timing, motor-command sequencing, safety interlocks, and communication logic in an automation controller. Deterministic parallel logic is preferable to a general-purpose processor when precise event timing and isolated I/O are required. The 195 I/Os provide ample connections for encoders, digital outputs, and field buses, but each bank must satisfy the voltage, termination, and hot-swap requirements of the connected equipment.
Recommended
Embedded Instrumentation and Signal Conditioning
The FPGA is suitable for instrumentation that performs parallel sampling, digital filtering, calibration tables, threshold detection, and data formatting before sending results to a host processor. Its 4032 logic cells support multiple fixed-function pipeline stages, while 195 I/Os allow broad multiplexing of sensor inputs and status signals. Keep analog conditioning outside the FPGA, select the correct I/O voltage, and use the -4 speed grade timing reports to establish whether the sampling pipeline closes at the intended clock frequency.
Recommended
Recommended Products Summary
Engineering reference data for XC3S200A-4FT256C — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC3S200A-4FTG256C | XC3S200A-4FTG256I | XC3S200A-5FT256C | XC3S200AN-4FT256C | XC3S200AN-4FTG256C |
|---|---|---|---|---|---|---|
| Package | 256-ball FT BGA (FT256) | 256-ball FT BGA (FT256) | 256-ball FT BGA (FT256) | 256-ball FT BGA (FT256) | 256-ball FT BGA (FT256) | 256-ball FT BGA (FT256) |
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3AN | Spartan-3AN |
| Logic Cells | 4032 cells | 4032 cells | 4032 cells | 4032 cells | 4032 cells | 4032 cells |
| System Gates | 200000 gates | 200000 gates | 200000 gates | 200000 gates | 200000 gates | 200000 gates |
| User I/O | 195 I/O | 195 I/O | 195 I/O | 195 I/O | 195 I/O | 195 I/O |
| Speed Grade | -4, 280 MHz | -4, 280 MHz | -4, 280 MHz | -5, 333 MHz | -4, 280 MHz | -4, 280 MHz |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Operating Temperature | 0 °C to 85 °C | 0 °C to 85 °C | -40 °C to 100 °C | 0 °C to 85 °C | 0 °C to 85 °C | 0 °C to 85 °C |
Key Differentiators
- Closest same-configuration ordering alternative (vs XC3S200A-4FTG256C)
- Industrial-temperature migration option (vs XC3S200A-4FTG256I)
- Additional timing headroom without changing the footprint (vs XC3S200A-5FT256C)
- Spartan-3AN migration path (vs XC3S200AN-4FT256C)
Design Notes
Do not treat every 256-ball Spartan-3A ordering option as automatically interchangeable. Speed grade, temperature grade, lead-free suffix, and Spartan-3AN-specific behavior can change even when the package and logic-cell counts match. Preserve the exact target suffix in new designs, compare the ordering tables, and recompile the RTL for the proposed replacement.
The FT256 package is a dense ball-grid device, so board construction, via-in-pad capability, solder-paste stencil design, and reflow profile all affect assembly yield. Use the manufacturer package drawing for ball coordinates and keep the BGA footprint identical to the original XC3S200A-4FT256C design. Check via dimensions, solder-mask clearance, and pad expansion against the fabricator's BGA process guidelines.
Separate the 1.2 V core rail from any externally supplied I/O reference voltages and verify bank-by-bank voltage compatibility. Place decoupling capacitance at the power and ground balls identified in the package documentation, then estimate total supply current from the utilized resources and I/O toggle rates. Leave configuration and startup current margins when designing the power tree.
Select the I/O standard from the external device's electrical requirements rather than from the nominal logic function. Differential pairs require the package-defined pin relationships, controlled impedance, and termination appropriate to the selected standard. Run timing and signal-integrity simulations with the actual board stack-up because the listed device frequency does not describe every external interface.
Legacy FPGA obsolescence creates both sourcing and migration risk. Before committing new production hardware, confirm that the required configuration tools, bitstream generation, and programming cables remain supported. If the product will remain in service for many years, evaluate a modern programmable-logic family with a documented migration path rather than assuming a second-source suffix is sufficient.
Compliance Information
The component is described as RoHS compliant and lead free. Automotive qualification, REACH status, halogen-free status, and conflict-minerals declarations are not stated in the available product information.