XMC4504F100K512ACXQMA1 - Cortex-M4 120MHz MCU | Infineon
MPN: XMC4504F100K512ACXQMA1 ✓ ActiveXMC4504F100K512ACXQMA1 Overview
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. Within the embedded-control hierarchy, the Cortex-M4 core belongs to the Arm Cortex-M family of 32-bit RISC processors. The XMC4000 family combines that core with industrial-oriented peripherals, flash, SRAM, communications interfaces, and clock-management resources, making the XMC4504 suitable for control systems that need both computation and network connectivity.
The main architectural features are a 120 MHz operating frequency, 512 KB of flash, 128 KB of SRAM, and integrated Ethernet MAC functionality. Flash supports code storage and firmware updates, while SRAM provides working memory for protocol stacks, control state, diagnostics, and real-time tasks. The Ethernet MAC allows the controller to participate in a network without requiring a separate MAC block elsewhere in the system. Infineon identifies the device as part of its industrial XMC4000 microcontroller family.
The XMC4504-F100F512-AC ordering designation identifies a 120 MHz Cortex-M4 industrial microcontroller with 512 KB of flash and 128 KB of SRAM. This part is supplied in a PG-LQFP-100 package with an exposed pad and is offered in tray packaging according to the product listing. The exposed thermal pad provides a direct heat-transfer path into the PCB, while the large 100-pin package exposes the device's broader pin and peripheral configuration.
Typical applications include industrial Ethernet controllers, programmable automation equipment, connected sensor-hub systems, industrial gateways, motion-control equipment, and embedded data-acquisition platforms. In each case, the 512 KB flash capacity can hold application firmware and protocol components, while the 128 KB SRAM can support networking buffers and real-time control state. An external Ethernet PHY is still required for the physical network interface when the MCU supplies only the Ethernet MAC.
PCB design should prioritize clean supply decoupling, a solid thermal-pad connection, and controlled routing of high-speed Ethernet signals. Place the input and bypass capacitors close to their associated supply pins, connect the exposed pad to the appropriate ground plane, and follow the package and layout guidance in the Infineon datasheet. Validate the complete clock, PHY, magnetics, and signal-integrity implementation before production release.
This page consolidates the manufacturer specifications, memory and connectivity requirements, package characteristics, application guidance, and replacement considerations into a practical engineering reference. It also distinguishes confirmed ordering information from areas that require device-specific validation before schematic release or firmware deployment.
Drop-in alternatives for XMC4504F100K512ACXQMA1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XMC4504F100K512ACXQMA1 (same form factor and footprint) — differing in Package, SRAM, Ethernet, Operating Temperature, Processor Core.
XMC4504-F100F512-AC
✅ Drop-In📋 Reference alternative (not in catalog)
XMC4504F100K512ACXQMA1 Maximum Ratings & Electrical Characteristics
| Product Type | Industrial 32-bit microcontroller (1 unit) |
| Processor Core | Arm Cortex-M4 (1 core) |
| CPU Frequency | 120 MHz |
| CPU Word Length | 32 bit |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bit |
| SRAM | 128 KB |
| Ethernet | 1 Ethernet MAC |
| Supply Voltage | 1.3 V or 3.3 V |
| Package | PG-LQFP-100 with exposed pad |
| Pin Count | 100 pins |
| Microcontroller Series | XMC4000 (1 series) |
| Application Class | Industrial (1 classification) |
| Delivery Packaging | Tray (1 package format) |
| RoHS Status | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_qualified |
XMC4504F100K512ACXQMA1 pg-lqfp-100 with exposed pad Pin Configuration Guide
Pin configuration for XMC4504F100K512ACXQMA1 (pg-lqfp-100 with exposed pad package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XMC4504F100K512ACXQMA1.
Refer to the datasheet for full pin configuration.
Typical Applications
XMC4504F100K512ACXQMA1 is suitable for 6 applications: Industrial Ethernet Control Controller, Programmable Automation Equipment, Industrial Sensor Hub, Motion-Control Platform, Connected Data-Acquisition System, Industrial Communication Gateway.
Industrial Ethernet Control Controller
The XMC4504F100K512ACXQMA1 fits industrial Ethernet control systems that combine deterministic processing with network connectivity. Its 120 MHz Cortex-M4 core provides timing headroom for real-time control tasks, while 512 KB of flash can hold application firmware, communication stacks, and configuration data. The 128 KB of SRAM supports Ethernet buffers, state machines, diagnostics, and supervisory logic without requiring an external memory device for moderate working sets. Because the MCU provides an Ethernet MAC, the design will normally pair it with an external PHY and the required isolation or magnetics. The 100-pin LQFP package also provides access to a broad peripheral set for discrete I/O, counters, communications, and timing functions.
Programmable Automation Equipment
For programmable automation controllers, the XMC4504F100K512ACXQMA1 combines a 120 MHz Arm Cortex-M4 core with 512 KB of flash and 128 KB of SRAM. The flash capacity is suitable for holding operating firmware, motion or sequencing logic, parameter tables, and field-upgrade support, while SRAM accommodates task state and I/O buffering. Its Ethernet MAC supports connection to supervisory systems, operator panels, or plant networks for status reporting and remote diagnostics. The industrial XMC4000 positioning is appropriate for equipment where deterministic control and network management are both required. Firmware should use the manufacturer's peripheral configuration and interrupt guidance, and production validation should include brownout behavior, watchdog recovery, and network fault handling.
Industrial Sensor Hub
The XMC4504F100K512ACXQMA1 is well matched to an industrial sensor hub that gathers sensor information and forwards it over Ethernet. Its 120 MHz Cortex-M4 core can service multiple digital I/O channels, timing functions, and communication tasks, while 128 KB of SRAM provides space for measurement buffers and protocol state. A 512 KB flash partition can retain application code, calibration data, and network configuration, with remaining capacity available for firmware revisions. The Ethernet MAC enables centralized monitoring and remote configuration when combined with an external PHY. Designers should budget processing margin for filtering, timestamps, diagnostics, and secure network services so the control loop is not compromised by communication overhead.
Motion-Control Platform
The XMC4504F100K512ACXQMA1 can serve as the central controller in an embedded motion-control platform where a 120 MHz Cortex-M4 core, 512 KB flash, and 128 KB SRAM support real-time sequencing. Its processing performance can coordinate timers, capture functions, control loops, and supervisory communications, while the Ethernet MAC enables status exchange with a host or line controller. The exposed-pad LQFP-100 package benefits from a PCB layout that provides effective heat spreading and clean supply distribution. Firmware architecture should separate real-time control from network services, use deterministic interrupt priorities, and verify timing with the final clock configuration. External power stages and sensing chains remain outside the MCU and must be designed as separate functional blocks.
Connected Data-Acquisition System
For connected data-acquisition equipment, the XMC4504F100K512ACXQMA1 combines local processing with Ethernet communications in a single industrial controller. Its 512 KB flash can store acquisition firmware, configuration definitions, and data-processing routines, while 128 KB of SRAM can serve as a rolling sample buffer. The 120 MHz Cortex-M4 core allows acquired information to be filtered or scaled before transmission rather than sending every raw sample to a remote host. Its Ethernet MAC supports a networked architecture, although a PHY, magnetic network interface, and careful signal layout remain necessary. Engineers should define buffering behavior for sustained data rates and ensure that network processing does not starve the acquisition timing chain.
Industrial Communication Gateway
The XMC4504F100K512ACXQMA1 is suitable for a communication gateway that translates between an embedded control subsystem and an Ethernet network. The 120 MHz Cortex-M4 core can manage protocol processing and supervisory tasks, 128 KB of SRAM can support packet buffers and routing state, and 512 KB of flash can hold gateway firmware plus protocol definitions. The integrated Ethernet MAC provides a structured starting point for network connectivity, but a compatible PHY and network magnetics must be added at the hardware level. For reliable operation, include heartbeat monitoring, timeout recovery, secure boot or update planning where required, and watchdogs for independent fault recovery. Final protocol timing should be verified with realistic message sizes and network congestion.
Engineering reference data for XMC4504F100K512ACXQMA1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XMC4504-F100F512-AC |
|---|---|---|
| Package | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 |
| CPU Frequency | 120 MHz | 120 MHz |
| Flash Memory | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB |
| Ethernet | 1 Ethernet MAC | 1 Ethernet MAC |
| Supply Voltage | 1.3 V or 3.3 V | 1.3 V or 3.3 V |
Key Differentiators
- Exact manufacturer ordering designation for the same device configuration (vs XMC4504-F100F512-AC)
- Substantial local memory for firmware and working state (vs XMC4504-F100F512-AC)
- Integrated Ethernet MAC for networked industrial designs (vs XMC4504-F100F512-AC)
Design Notes
Connect the exposed pad to a low-impedance ground plane and provide uninterrupted copper beneath the package. The PG-LQFP-100 package exposes a large thermal-contact area, but its effectiveness depends on via distribution, solder coverage, and the PCB copper geometry. Use thermal vias where permitted by the manufacturer layout guidance and avoid placing long thermal discontinuities beneath the pad. Validate junction-temperature margin against the final switching activity and ambient operating condition.
Place all required supply capacitors close to their associated pins, with the shortest possible return path through the ground plane. Separate sensitive analog or low-level signal routing from high-current outputs and switching nodes. The 100-pin package leaves limited escape space for a dense industrial design, so complete pin assignment and placement before routing. Treat every unused pin according to the Infineon datasheet rather than leaving it electrically unaccounted for.
Design the Ethernet path as a controlled-impedance interface. Keep the MCU-to-PHY traces short, use a continuous reference plane, avoid stubs and test-point discontinuities, and follow the PHY and XMC reference-layout guidance. The Ethernet MAC does not include the physical network interface, so PHY selection, clocking, termination, isolation, magnetics, and connector implementation must be validated as a complete signal path.
Do not treat XMC4504-F100F512-AC and XMC4504F100K512ACXQMA1 as separate performance variants without checking the ordering table. The first is the manufacturer ordering designation, while the second is the extended commercial ordering code for the same configuration. Also avoid assuming that a generic 100-pin LQFP alternative is interchangeable: flash size, SRAM, Ethernet, peripheral assignment, voltage domains, and exposed-pad requirements must all match before PCB reuse is approved.
Compliance Information
The device is identified as an industrial MCU, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was included in the accessible product information.