Microcontroladores

Produtos (18756)

DSPIC33FJ06GS001T-I/SO - 16-bit 40 MIPS SMPS DSC | Microchip
DSPIC33FJ06GS001T-I/SO

DSPIC33FJ06GS001T-I/SO - 16-bit 40 MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ06GS001T-I/SO is a 16-bit dsPIC33F SMPS digital signal controller (DSC) delivering up to 40 MIPS performance with 6 KB (2K x 24) of FLASH program memory and 256 bytes of RAM, housed in an 18-pin SOIC package rated for -40C to +85C industrial operation. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33FJ GS family sits between general-purpose MCUs and dedicated digital power ICs: it runs the control loop of switching power supplies in firmware while providing purpose-built PWM, ADC, and analog-comparator peripherals for closed-loop regulation. Key features include a high-speed 16-bit dsPIC core at 40 MIPS, dedicated high-resolution PWM outputs tailored for switch-mode power-supply topologies, an on-chip ADC with fast conversion rates for current- and voltage-feedback sampling, and analog comparators that support cycle-by-cycle current limiting without CPU intervention. The 6 KB self-programming FLASH supports field firmware updates, while the 256-byte RAM holds control-loop state variables. Architecturally, the device pairs a DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator) with C-friendly MCU addressing, allowing deterministic single-cycle MAC operations for Proportional-Integral compensation loops. The GS family data sheet (Microchip document DS75018, family dsPIC33FJ06GS001/101A/102A/202A) details the SMPS-focused peripheral set. Typical applications include AC-DC power supplies with power factor correction, DC-DC converters, LLC and flyback control, LED drivers, and digital battery chargers. Microchip offers an interleaved PFC reference design producing up to 350 W from universal input, demonstrating the family in production-grade digital power. When designing, verify that the 6 KB program memory and 256-byte RAM budget accommodate your compensator and state machine, and follow the datasheet decoupling and VDD/AVSS pin connection guidelines for analog noise performance. This page adds value beyond the datasheet by consolidating distributor availability, pricing tiers, drop-in alternatives, and practical design notes in one place.

Cotação Contato
DSPIC33FJ06GS001T-I/SS - 16-bit DSC 40 MIPs 6KB Flash | Microchip
DSPIC33FJ06GS001T-I/SS

DSPIC33FJ06GS001T-I/SS - 16-bit DSC 40 MIPs 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS001T-I/SS is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance with 6 KB (2K x 24) of FLASH program memory, 256 bytes of RAM, and a 20-pin SSOP surface-mount package operating from a 3.3 V supply. A digital signal controller combines the deterministic control flow of a microcontroller (MCU) with the mathematical throughput of a digital signal processor (DSP). Within the power-management hierarchy, the dsPIC33F GS family sits at the intersection of general-purpose MCUs and dedicated digital power ICs, providing a single-chip solution for closed-loop switch-mode power supply (SMPS) control. Key features include high-speed PWM peripherals purpose-built for digital power conversion, a high-speed 10-bit ADC, on-chip comparators, and connectivity via I2C, SPI, UART/USART, IrDA, and LINbus. The 40 MIPS core executes DSP instructions such as multiply-accumulate, enabling fast loop compensation in firmware. Architecturally, the device pairs a 16-bit modified Harvard RISC core with a 24-bit instruction word, hardware looping, and single-cycle MAC, so control-law calculations complete within tight PWM interrupt windows. The GS family was designed specifically for digital power: peripheral interconnects allow ADC results to trigger PWM updates with minimal CPU latency. Typical applications include AC-DC converters, DC-DC converters, power factor correction (PFC) stages, and uninterruptible power supplies (UPS), where deterministic PWM control and fast analog feedback are essential. It is also used in LED drivers and battery chargers. Design consideration: the -I grade part is rated -40C to +85C; for +125C environments choose the /E temperature variant in the same family. This page synthesizes distributor listings, cross-reference data, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS101A-I/P - 16-bit 40 MIPS DSC, 6KB Flash | Microchip
DSPIC33FJ06GS101A-I/P

DSPIC33FJ06GS101A-I/P - 16-bit 40 MIPS DSC, 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101A-I/P is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS from its dsPIC33F core, with 6 KB (2K x 24) of FLASH program memory, 256 words of SRAM, and an integrated high-speed PWM, ADC and analog comparators, housed in an 18-pin PDIP (0.300 inch / 7.62 mm) through-hole package. A digital signal controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller. In the product hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it is a 16-bit microcontroller (digital signal controller -> microcontroller -> embedded processor) optimized for closed-loop, real-time control loops such as digital power conversion and motor control. Key features include a 16-bit modified Harvard architecture executing at up to 40 MIPS, 24-bit-wide FLASH instructions, dual analog comparators with programmable references, and the high-speed PWM module with dedicated time base and dead-time control that defines the GS (SMPS) family. The -I suffix specifies the industrial temperature range of -40C to +85C. The device is fabricated in CMOS technology and operates from a 3.3 V supply (2.5 V to 3.6 V range per the family datasheet). The high-speed PWM supports complementary, push-pull and independent outputs, making the part a compact controller for switch-mode power supplies (SMPS), power factor correction (PFC) stages, and DC-DC converters. A single 10/12-bit ADC channel set and comparator outputs allow fast analog feedback loops without external components. Typical applications include interleaved PFC front ends (Microchip's 350 W interleaved PFC reference design is based on this family), digital AC-DC and DC-DC power supplies, LED drivers, and battery chargers. Design consideration: choose the PDIP package for prototyping and low-volume through-hole boards; for production SMT, the same die is offered in SOIC and SSOP packages, but those are not footprint-compatible with the 18-pin DIP. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS101A-I/SS - 16-bit DSC 40 MIPS 6KB Flash | Microchip
DSPIC33FJ06GS101A-I/SS

DSPIC33FJ06GS101A-I/SS - 16-bit DSC 40 MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101A-I/SS is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 6 KB of Flash program memory (2K x 24) and 256 bytes of RAM, housed in a 20-pin SSOP (SS) surface-mount package. It belongs to the SMPS-focused dsPIC33FJ GS family, integrating a high-speed PWM module, 10-bit ADC, and analog comparators purpose-built for digital power conversion. A digital signal controller combines the computational throughput of a DSP core with the peripheral set and interrupt architecture of a microcontroller. In the power-management hierarchy, the dsPIC33FJ GS family sits between generic MCUs and dedicated digital power ASICs, giving designers programmable control loops for switch-mode power supplies, inverters, and battery chargers. Key differentiators include a 40 MIPS core at 3.0V-3.6V (30 MIPS at 2.5V-3.0V), a high-resolution PWM module supporting complementary outputs with dead-time control, DSP-engine multiply-accumulate instructions for PID and filter algorithms, and an industrial temperature grade of -40C to +85C. The 6 KB self-programming Flash supports field firmware updates in deployed power supplies. The SMPS peripheral architecture is optimized for closed-loop digital power: fast analog-to-digital conversion synchronized to the PWM period, on-chip comparators for cycle-by-cycle current limiting, and deterministic interrupt latency that preserves control-loop stability. The 16-bit modified Harvard architecture executes two instructions per cycle at maximum clock, and the DSP engine accelerates proportional-integral control and signal conditioning. Typical applications include interleaved power factor correction (Microchip reference designs demonstrate 350 W universal-input PFC using this device), LLC and flyback AC-DC converters, DC-DC bricks, digital lighting ballasts, and battery chargers where adaptive control algorithms replace fixed-function analog controllers. Design consideration: at full 40 MIPS the device requires a 3.0V-3.6V supply; if your rail is 2.5V-3.0V, derate to 30 MIPS or verify timing margins in the control loop. Also budget the small 256-byte RAM carefully - control-loop state variables and compensation coefficients must fit. This page synthesizes distributor pricing, drop-in alternatives, design notes, and application guidance not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33FJ06GS101AT-E/SO - 16-bit DSC 40 MIPs 6KB Flash | Microchip
DSPIC33FJ06GS101AT-E/SO

DSPIC33FJ06GS101AT-E/SO - 16-bit DSC 40 MIPs 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101AT-E/SO is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 40 MIPs of core performance with 6KB (2K x 24) of FLASH program memory, 256 bytes of RAM, and dedicated SMPS PWM peripherals, housed in an 18-pin SOIC (7.50 mm body width) package rated for -40C to +125C extended automotive temperature operation. A Digital Signal Controller combines the compute characteristics of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above a basic MCU: it executes DSP-class multiply-accumulate instructions while integrating specialized control loops, making the dsPIC33F family a natural fit for switch-mode power supply (SMPS), power conversion, and digital power applications. Key features include the 16-bit dsPIC core running at 40 MIPS, high-resolution SMPS PWM outputs purpose-built for peak-current-mode and voltage-mode power converter control, and serial connectivity via I2C, SPI, UART/USART, IrDA, and LINbus. The extended temperature rating (-40C to +125C) and AEC-Q100 automotive qualification support under-hood and industrial environments where consumer-grade parts cannot survive. Architecturally, the dsPIC33F core uses a modified Harvard pipeline with a 24-bit instruction word, hardware DSP engine, and deterministic interrupt latency. The 6KB self-programmable FLASH supports field firmware updates, while the compact 256-byte RAM budget keeps register-heavy control loops disciplined - engineers typically allocate RAM statically and avoid dynamic allocation. Typical applications include digital SMPS and AC-DC converter control, LED drivers, battery chargers, power factor correction stages, and automotive auxiliary power modules. The SMPS PWM peripheral directly targets these topologies with fast analog comparators and programmable dead time. A key design consideration: with only 256 bytes of RAM, plan the control-loop variable map before writing firmware, and verify FLASH erase/write endurance for any in-field update scheme. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS101AT-I/SO - 16-bit 40 MIPS DSC 6KB Flash | Microchip
DSPIC33FJ06GS101AT-I/SO

DSPIC33FJ06GS101AT-I/SO - 16-bit 40 MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101AT-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33FJ GS101 family, delivering up to 40 MIPS at 3.3V with 6KB (2K x 24) of Flash program memory and 256 bytes of RAM, housed in an 18-pin SOIC (SO) package with industrial temperature rating (-40C to +85C). A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC such as the dsPIC33F sits between a general-purpose MCU and a dedicated DSP, making it the natural control engine for switched-mode power conversion where fast, deterministic closed-loop control is required. Key features of the GS101 variant center on its digital power peripherals: high-speed PWM outputs with sub-nanosecond-resolution-capable control suitable for power-conversion topologies, an on-chip high-speed 10-bit ADC for fast current and voltage sampling, and analog comparators for cycle-by-cycle current limiting. The 40 MIPS core executes a modified Harvard 16-bit instruction set with DSP multiply-accumulate instructions, enabling tight control loops for peak-current-mode or voltage-mode regulation. Technically, the dsPIC33FJ06GS101 runs from a single 3.0V to 3.6V supply and supports internal PLL clocking so a low-cost external crystal can generate the full-speed instruction clock. In-circuit serial programming (ICSP) and debugging via the two-wire programming interface allow firmware updates through standard Microchip tools (MPLAB X IDE with the MPLAB XC-DSC compiler and PICkit/ICD programmers). Typical applications include AC-DC and DC-DC power supplies, power factor correction (PFC) stages, LED drivers, battery chargers, and digital lighting ballasts. The integrated high-speed PWM plus fast ADC combination removes the need for external analog control circuitry in many designs. When designing with this device, budget the 256-byte RAM carefully: control-loop variables, ADC buffers, and the software stack must fit comfortably, so prefer static allocation and avoid large local arrays in interrupt service routines. This page synthesizes distributor pricing, drop-in same-package alternatives, datasheet sourcing, and practical design notes not found in the manufacturer product listing alone.

Cotação Contato
DSPIC33FJ06GS101AT-I/SS - 16-bit 40 MIPS DSC 6KB Flash | Microchip
DSPIC33FJ06GS101AT-I/SS

DSPIC33FJ06GS101AT-I/SS - 16-bit 40 MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101AT-I/SS is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 40 MIPS performance at 3.3V, with 6KB (2K x 24) of FLASH program memory and 256 bytes of RAM, housed in a 20-pin SSOP (SS, 5.30mm width) package supplied in tape and reel. A Digital Signal Controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC is a class of microcontroller optimized for closed-loop control loops such as switch-mode power supplies (SMPS), power factor correction, and digital lighting ballasts, where fast multiply-accumulate (MAC) operations and precise PWM generation are required. Key features of this device include the 16-bit dsPIC33F core executing up to 40 million instructions per second, DSP-engine instructions with dual operand fetch for single-cycle MAC operations, 6KB of self-programmable flash, and an industrial operating temperature range of -40C to +85C indicated by the -I suffix. The AT suffix denotes a tape-and-reel packaging variant of the A-revision silicon. The GS-series architecture is specifically tuned for digital power conversion: the core supports the MAC instruction that concurrently fetches two data operands from memory while multiplying two W registers and accumulating the result in the same cycle, per the dsPIC33FJ06GS101/X02 family datasheet. Programming and in-circuit debugging are supported via ICSP (In-Circuit Serial Programming) using two device I/O pins plus the reset line, compatible with the MPLAB SNAP and PICkit programmers, and development is supported by the MPLAB XC-DSC C/C++ compiler. Typical applications include switch-mode power supplies, AC-DC and DC-DC converters, power factor correction stages, LED drivers, battery chargers, and digital lighting control where high-speed closed-loop control is mandatory. When designing with this device, budget the limited 256 bytes of RAM carefully, since control-loop state variables and compensation coefficients must fit within it; most GS-series designs keep ISR-heavy control code in assembly-optimized or tightly written C. This page synthesizes distributor availability data, drop-in family alternatives, and practical design guidance not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS102-I/MM - 16-bit 40MIPS DSC 6KB Flash | Microchip
DSPIC33FJ06GS102-I/MM

DSPIC33FJ06GS102-I/MM - 16-bit 40MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS102-I/MM is a 16-bit digital signal controller (DSC) from the dsPIC33F GS digital-power family, delivering 40 MIPS performance with 6KB (6K x 8) of FLASH program memory and 256 bytes of RAM, housed in a 28-lead QFN-S (6x6 mm) package with exposed pad. A digital signal controller combines the compute power of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33F GS family sits between general-purpose MCUs and dedicated digital-power ASICs, providing programmable control loops for switch-mode power conversion where analog controllers lack flexibility and pure MCUs lack deterministic PWM and ADC throughput. Key features include a 16-bit fixed-point DSP engine with a barrel shifter and dual internal buses, high-speed PWM peripherals purpose-built for multi-loop digital power supplies, an on-chip ADC and comparators for fast current- and voltage-loop feedback, and operation across an industrial temperature range of -40C to +85C from a 3.0V to 3.6V supply. The exposed-pad QFN package provides low-inductance grounding and compact 6x6 mm board footprint. The CMOS architecture runs up to 40 MIPS (with the device clocked from an internal PLL), giving deterministic execution of PI/PID control loops at switching frequencies typical of AC-DC and DC-DC converters. Boundary-scan support aids production test, and low-power modes reduce standby consumption in always-on power systems. Typical applications include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, and uninterruptible power supplies, where the device provides full digital control of power conversion and system management functions in a single chip. For design, keep the exposed thermal pad soldered to a solid ground pour for signal integrity of high-frequency PWM switching; budget the 6KB flash carefully, as digital-power control plus state management code rarely exceeds this without optimization. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS102A-E/SO - 16-bit 40 MIPS DSC 28-SOIC | Microchip
DSPIC33FJ06GS102A-E/SO

DSPIC33FJ06GS102A-E/SO - 16-bit 40 MIPS DSC 28-SOIC | Microchip

The Microchip Technology DSPIC33FJ06GS102A-E/SO is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ06GS family, delivering 40 MIPS performance, 6KB (2K x 24) of Flash program memory, and 256 bytes of RAM, powered from a single 3.3V supply in a 28-pin SOIC package (7.50 mm body width) in extended temperature grade (-40C to +125C). A Digital Signal Controller combines the compute architecture of a microcontroller with the math throughput of a DSP engine. In the power-management hierarchy, this SMPS-focused DSC sits at the heart of digital power conversion systems, executing control-loop firmware for switch-mode power supplies instead of analog control ICs. The dsPIC33F family features a modified Harvard architecture with a 16-bit data path, DSP multiply-accumulate instructions, and rich on-chip analog peripherals. Key features for digital power include a high-speed PWM module purpose-built for switch-mode power supply topologies, an on-chip 10-bit ADC capable of sampling multiple channels simultaneously, and integrated analog comparators that enable fast overcurrent protection without external circuitry. These peripherals allow multi-loop control of converters such as buck, boost, flyback, and PFC stages entirely in firmware. Architecturally, the dsPIC33 RISC core executes most instructions in a single cycle at up to 40 MIPS, and the ADC-PWM trigger coordination provides deterministic loop timing critical for stable digital control. The 'A' revision of the GS102 improves errata relative to the original DSPIC33FJ06GS102, and the -E suffix guarantees operation across the extended -40C to +125C industrial range. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and digital lighting ballasts, where the high-speed PWM and fast comparators directly address SMPS control requirements. Design consideration: plan firmware around ADC end-of-sample interrupts triggering the PWM duty update each switching cycle, and use the Microchip MPLAB X IDE with the XC16 compiler or the XC-DSC compiler for development; ICSP programming requires PGECx/PGEDx pin pairs used together. This page synthesizes distributor availability data, drop-in alternatives within the same 28-SOIC footprint, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS102A-I/SP - 16-bit DSC 40 MIPS 6KB | Microchip
DSPIC33FJ06GS102A-I/SP

DSPIC33FJ06GS102A-I/SP - 16-bit DSC 40 MIPS 6KB | Microchip

The Microchip Technology DSPIC33FJ06GS102A-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33F GS family, delivering 40 MIPS performance, 6 KB (2K x 24) of Flash program memory, and 256 bytes of RAM in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package rated from -40C to +85C. A digital signal controller combines the compute throughput of a DSP core with the peripheral set and ease of use of a microcontroller. Within the power-management IC hierarchy, the dsPIC33FJ06GS102A sits in the SMPS-focused GS subfamily: it integrates a high-speed PWM module, a high-speed 10-bit ADC, and analog comparators specifically architected for closed-loop digital switch-mode power conversion. Key features include a 16-bit dsPIC33F core executing at 40 MIPS from a 3.0V to 3.6V supply, on-chip connectivity peripherals (I2C, SPI, UART/USART with IrDA and LIN support), brown-out detect/reset, and dual programmable PGEC/PGED ICSP programming channel pairs for in-circuit debugging. The 24-bit instruction word with DSP multiply-accumulate and barrel shifter accelerates control-loop mathematics such as PID and PFC compensation. The GS architecture was purpose-built for digital power: the high-resolution PWM supports complementary outputs, dead-time insertion, and fault protection, while the fast ADC can sample at converter-switching frequency with simultaneous or sequential channel scanning, enabling multi-loop control in a single controller. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies, and battery chargers. The 28-pin SPDIP package also makes it convenient for prototyping and low-volume industrial control boards. Design consideration: the device operates at 3.3V nominal (3.0V to 3.6V), so level shifting is required when interfacing with 5V legacy logic; use the paired PGECx/PGEDx channel for ICSP. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing references as of 2026-09-26.

Cotação Contato
DSPIC33FJ06GS102A-I/SS - 16-bit DSC 40 MIPs 6KB Flash | Microchip
DSPIC33FJ06GS102A-I/SS

DSPIC33FJ06GS102A-I/SS - 16-bit DSC 40 MIPs 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS102A-I/SS is a 16-bit digital signal controller (DSC) delivering 40 MIPs performance with 6KB (2K x 24) of Flash program memory and 256 bytes of RAM, housed in a 28-pin SSOP (5.30 mm width) package. It operates from a 3.3V supply across an industrial temperature range of -40C to +85C. A digital signal controller combines the computational throughput of a DSP with the control peripherals and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits above a basic MCU because it adds high-resolution PWM, fast analog-to-digital conversion, and analog comparators in a single chip, making it the natural controller choice for switch-mode power conversion where timing precision and fast control loops are essential. Key features include the dsPIC33F 16-bit core at up to 40 MIPs, high-speed PWM modules purpose-built for power conversion, a high-speed 10-bit ADC, and multiple analog comparators. These peripherals directly support multi-loop digital control of SMPS topologies without external analog control circuitry, reducing BOM cost and improving loop flexibility. The GS102A variant belongs to the dsPIC33FJ06GS family documented in the Microchip data sheet DS-75018B covering dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302 devices. In-circuit debugging and In-Circuit Serial Programming (ICSP) are supported through any PGECx/PGEDx pin pair using tools such as MPLAB SNAP, which connects via a standard 8-pin interface using two device I/O pins plus the reset line. Typical applications include AC to DC converters, DC to DC converters, Power Factor Correction (PFC) stages, and uninterruptible power supplies (UPS), as well as battery chargers and LED drivers. The high-speed PWM and on-chip comparators enable peak-current-mode and voltage-mode digital control in compact footprints. When designing with this device, choose one PGECx/PGEDx pair and keep it dedicated to programming and debugging; mixing pairs between ICSPCLK and ICSPDAT will prevent connection. Provide adequate decoupling on the 3.3V rail and respect the 28-SSOP thermal limits in enclosed power supplies. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet, adding selection value for digital power engineers.

Cotação Contato
DSPIC33FJ06GS102A-I/TL - 16-bit 40 MIPS DSC 6KB Flash | Microchip
DSPIC33FJ06GS102A-I/TL

DSPIC33FJ06GS102A-I/TL - 16-bit 40 MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS102A-I/TL is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS core performance with 6KB (2K x 24) of FLASH program memory and 256 bytes of RAM, packaged in a 36-pin VTLA (5x5 mm) surface-mount QFN-style package and supplied in tube packaging. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy, the DSC sits above a plain MCU because it adds DSP-class multiply-accumulate capability, making it the preferred controller class for digital switch-mode power supplies (SMPS), power factor correction, and closed-loop motor control where deterministic loop timing matters. The GS102A family variant is purpose-built for digital power conversion. Its headline peripherals are a High-Speed PWM module with fine-grained duty-cycle and dead-time resolution, a high-speed 10-bit ADC, and multiple analog comparators - the exact analog/control trio required to close current and voltage loops in modern converters. The 40 MIPS core executes control-loop mathematics quickly enough for multi-loop topologies, and the 6KB self-programming FLASH (2K x 24 instruction words) suits compact, fixed-function power firmware. Typical applications named in the Microchip datasheet include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, and uninterruptible power supplies (UPS). The integrated high-speed PWM and comparators allow hysteretic or peak-current-mode control to be implemented with minimal external circuitry. Design consideration: the device operates from a 3.3V supply and offers multiple PGECx/PGEDx pin pairs; In-Circuit Serial Programming (ICSP) and in-circuit debugging via MPLAB SNAP or PICkit require a PGEC/PGED pair to be used consistently (for example, PGEC2 with PGED2). This page adds value beyond the manufacturer datasheet by consolidating distributor availability, drop-in family alternatives, compliance status, and practical SMPS design notes in one place. Note: Microchip lists the dsPIC33FJ06GS102A as In Production on its official product page, while some distribution partners report the /TL tube-packaged variant as obsolete at their location; verify current sourcing before committing to new designs.

Cotação Contato
DSPIC33FJ06GS102AT-E/SO - 16-bit 40 MIPS DSC | Microchip
DSPIC33FJ06GS102AT-E/SO

DSPIC33FJ06GS102AT-E/SO - 16-bit 40 MIPS DSC | Microchip

The Microchip Technology DSPIC33FJ06GS102AT-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33FJ06GS102A family, delivering 40 MIPS performance with 6KB (2K x 24) of FLASH program memory, 256 bytes of RAM, and a 3.3V supply in a 28-pin SOIC package. It is automotive-qualified to AEC-Q100 and rated for -40C to +125C operation. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). DSCs sit in the power-management hierarchy between general-purpose MCUs and dedicated DSPs: they execute tight control loops for switch-mode power conversion while retaining the interrupt structure, timers, and I/O flexibility that embedded designers expect from Microchip PIC architectures. Key features include the 16-bit dsPIC33F core executing up to 40 MIPS, on-chip SMPS-optimized PWM peripherals purpose-built for power-supply control, and system-level safety functions such as Brown-out Detect/Reset (BOR), Power-on Reset (POR), and a Watchdog Timer (WDT). The 24-bit instruction word with 2K x 24 program memory organization supports deterministic real-time control code. The device uses the CMOS dsPIC33F architecture with a barrel shifter, hardware multiply-accumulate support for filter and control-loop mathematics, and boundary-scan (JTAG-class) debug capability. The dedicated high-resolution PWM modules make it a natural fit for voltage-mode, current-mode, and multi-phase digital power topologies that would otherwise require analog controllers. Typical applications include switched-mode power supplies (SMPS), automotive motor-control and LED-lighting modules, power factor correction (PFC) stages, and battery chargers - anywhere the combination of 40 MIPS, AEC-Q100 qualification, and SMPS PWM peripherals shortens development time. Design consideration: this is a 3.0V to 3.6V part - level-shift or translate any 5V sensor or host interfaces, and program the device via ICSP using the MPLAB XC-DSC compiler toolchain. This page synthesizes distributor availability data, drop-in alternatives, and engineering design guidance not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS102AT-E/TL - 16-bit DSC, 40 MIPs, 6KB Flash | Microchip
DSPIC33FJ06GS102AT-E/TL

DSPIC33FJ06GS102AT-E/TL - 16-bit DSC, 40 MIPs, 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS102AT-E/TL is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 40 MIPs performance with 6KB (2K x 24) of Flash program memory, 0.25KB of RAM, and a 3.3V supply, housed in a 36-pin VTLA (5x5 mm) exposed-pad package. It is AEC-Q100 qualified for automotive applications. A Digital Signal Controller combines the computational capability of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). Within the power-management hierarchy, a DSC such as the dsPIC33FJ06GS102A sits at the heart of digital power conversion systems, replacing analog control loops with firmware-driven algorithms such as peak current mode control, voltage mode control, and power factor correction. Key features include the 16-bit dsPIC RISC core running at up to 40 MIPs, dedicated SMPS PWM peripherals optimized for switching power supplies, 6KB self-programmable Flash, and AEC-Q100 automotive qualification with an extended -40C to +125C (E-grade) operating temperature range. The exposed-pad VTLA package improves thermal dissipation for high-switching-frequency designs. Architecturally, the device pairs the DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator, dual operand fetch) with the SMPS-focused PWM module, enabling deterministic cycle-by-cycle control of converters operating at hundreds of kHz. Program memory is organized as 2K x 24-bit instruction words. Typical applications include AC-DC and DC-DC power supplies, digital lighting ballasts, battery chargers, automotive power modules, and embedded control systems requiring DSP-level math with MCU-style peripherals. A key design consideration is supply integrity: use proper decoupling on the 3.3V rail and a solid ground connection to the exposed thermal pad for both EMI and thermal performance. This page synthesizes distributor availability, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33FJ06GS102AT-I/MM - 16-bit 40 MIPS DSC 6KB Flash | Microchip
DSPIC33FJ06GS102AT-I/MM

DSPIC33FJ06GS102AT-I/MM - 16-bit 40 MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS102AT-I/MM is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ GS family delivering up to 40 MIPS of performance, with 6KB (2K x 24) of FLASH program memory and 256 bytes of RAM, housed in a 28-pin QFN-S (6x6 mm) surface-mount package with exposed thermal pad. A Digital Signal Controller combines the computational throughput of a Digital Signal Processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). In the power-management hierarchy, the dsPIC33FJ GS family sits at the top of the dsPIC33F line for digital power conversion, pairing a 16-bit modified Harvard CPU with dedicated analog and PWM hardware. Key features highlighted by distributors include high-speed PWM modules, on-chip analog-to-digital conversion and analog comparators, making this part explicitly targeted at Switch-Mode Power Supply (SMPS) and digital power control applications. The GS family architecture provides deterministic execution of control loops, with DSP instructions (MAC, DSP multiply) accelerating compensator algorithms. The device operates from a single 3.3V supply (3.0V to 3.6V range per distributor data) across the industrial -40C to +85C temperature range, indicated by the I temperature suffix. The T suffix denotes tape-and-reel delivery for automated assembly. Typical applications include digital switch-mode power supplies, AC-DC and DC-DC converters, power factor correction stages, LED drivers, and battery chargers, where the dedicated high-speed PWM peripherals close digital control loops with microsecond-scale updates. Designers should plan for the modest 256-byte RAM when structuring control variables and avoid deep C stacks; the MPLAB XC-DSC compiler provides fine control over code generation for these resource constraints. This page adds value beyond the datasheet by synthesizing distributor pricing tiers, verified drop-in alternatives, application guidance, and FAQ content not found on the manufacturer page.

Cotação Contato
DSPIC33FJ06GS102AT-I/SO - 16-bit DSC 40 MIPS 6KB Flash | Microchip
DSPIC33FJ06GS102AT-I/SO

DSPIC33FJ06GS102AT-I/SO - 16-bit DSC 40 MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS102AT-I/SO is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering up to 40 MIPS performance from 6KB (2K x 24) of Flash program memory with 256 bytes of RAM, operating at 3.3V in a 28-pin SOIC package supplied on tape and reel. It belongs to the SMPS-optimized GS series, which integrates peripherals specifically designed for digital switch-mode power-supply and power-conversion control. A Digital Signal Controller combines the deterministic interrupt latency and control peripherals of a microcontroller with the multiply-accumulate throughput of a DSP core. In the power-management hierarchy, DSCs sit between general-purpose MCUs and dedicated digital-power ASICs, offering programmable flexibility for loop compensation, sequencing, and telemetry in one chip. Key features include a 16-bit modified Harvard architecture with DSP engine (17-bit x 17-bit single-cycle MAC), 40 MIPS operation at 3.3V, high-resolution PWM modules suited to peak-current-mode and voltage-mode converter topologies, and a 10-bit ADC with simultaneous multi-channel sampling for fast feedback loops such as current sharing and voltage-mode control. The 6KB self-programming Flash supports field firmware updates, while 256 bytes of RAM accommodate control-loop state variables and PI/PID coefficients. Architecturally, the dsPIC33F GS core pairs a 16-bit RISC CPU with hardware multiply/divide and dual operand fetch, sustaining single-cycle MAC operations that keep digital control-loop latencies predictable. The GS peripheral set is tailored to digital power: complementary PWM outputs with dead-time insertion, fault inputs for cycle-by-cycle current limiting, and ADC triggers synchronized to the PWM period. Typical applications include AC-DC and DC-DC converter digital control, power factor correction (PFC) stages, LED drivers, battery chargers, and solar micro-inverter sub-circuits. The 40 MIPS core closes current loops in the tens-of-kilohertz range required by these topologies. A key design consideration is that the industrial-grade I-temperature variant is specified for -40C to +85C; for -40C to +125C environments select the E-temperature DSPIC33FJ06GS102AT-E/SO, which shares the same die and footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS102AT-I/SS - 16-bit 40MIPS DSC 6KB Flash | Microchip
DSPIC33FJ06GS102AT-I/SS

DSPIC33FJ06GS102AT-I/SS - 16-bit 40MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS102AT-I/SS is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ GS family delivering up to 40 MIPs at 3.3V, with 6KB (2K x 24) of FLASH program memory, in a 28-pin SSOP surface-mount package with 5.30 mm body width, supplied in tape and reel. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller, sitting in the product hierarchy between a general-purpose MCU (such as a PIC18) and a dedicated DSP. In a digital power system, the DSC executes the control loop - for example a proportional-integral compensator running at switching frequency - while also handling housekeeping tasks like sequencing, telemetry and communication. The GS family is purpose-built for digital switch-mode power conversion. Key features include a high-speed 16-bit core with DSP engine, peripherals supporting multi-loop control topologies such as Power Factor Correction (PFC), and an architecture optimized for AC-DC converters, DC-DC converters and UPS applications, as documented on the Microchip dsPIC33FJ06GS102A product page. The 6KB FLASH with 2K x 24 word organization suits compact, deterministic control firmware, and the industrial temperature rating (-40C to +85C) covers most commercial and industrial environments. Technically, the device executes C and hand-optimized assembly via the MPLAB XC-DSC C/C++ compiler, which provides full access to DSC hardware capabilities including DSP multiply-accumulate instructions. The 40 MHz-class clock system yields 40 MIPs, sufficient for closed-loop control of converters switching at hundreds of kilohertz with single-cycle MAC throughput. Typical applications include digital AC-DC and DC-DC power supplies, power factor correction stages, uninterruptible power supplies, LED drivers and battery charging systems - anywhere a fast, deterministic control loop replaces analog compensation. When designing, budget program memory carefully: 2K x 24 words fills quickly once control loops, state machines and communication are combined, so consider the 16KB GS202 variant for headroom. This page adds value beyond the manufacturer datasheet by consolidating distributor availability, drop-in alternatives, pricing tiers and practical design notes in one citable reference. Pricing shown reflects distributor data as of 2026-09-26.

Cotação Contato
DSPIC33FJ06GS202-E/MM - 16-bit DSC 6KB Flash 28-QFN | Microchip
DSPIC33FJ06GS202-E/MM

DSPIC33FJ06GS202-E/MM - 16-bit DSC 6KB Flash 28-QFN | Microchip

The Microchip Technology DSPIC33FJ06GS202-E/MM is a 16-bit digital signal controller (DSC) combining a dsPIC33F core, 6 KB of self-programming Flash memory, 1 KB of SRAM, high-speed PWM modules, comparators, and an ADC, packaged in a 28-pin QFN-S (MM) 6x6 mm surface-mount package with an extended -40C to +125C operating temperature range. A digital signal controller is a hybrid device that merges the deterministic control structure of a microcontroller with the mathematical throughput of a DSP. Within the power-management hierarchy, the dsPIC33F 'GS' family sits between general-purpose MCUs and dedicated digital-power ASICs: it is a 16-bit MCU/DSP that closes control loops in switch-mode power supplies, lighting ballasts, and battery chargers entirely in firmware. Key features of this part include the high-speed PWM peripheral purpose-built for power conversion, on-chip analog comparators for cycle-by-cycle current limiting, and an ADC that samples the power stage directly. The '-E' temperature grade (up to +125C ambient) supports mounted environments near hot power stages, and the 28-QFN footprint minimizes loop inductance for switching converters. Architecturally, the dsPIC33F core provides multiple internal buses, a barrel shifter, DSP multiply-accumulate instructions, and IEEE 1149.2-compatible JTAG boundary scan, with In-Circuit and In-Application programming supported through Flash self-write. Peripheral Pin Select (PPS) allows remapping of PWM and communication functions to available pins, easing PCB layout in dense power designs. Typical applications include AC-DC and DC-DC digital power supplies, LED drivers, battery chargers, power factor correction stages, and uninterruptible power supplies, where the GS DSC executes voltage, current, and PFC control loops in firmware. When designing with this device, budget the 6 KB Flash carefully: the digital control loop, compensation, and state machine typically fit, but complex communication stacks may not, so verify code size early in the project. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS202-I/SP - 16-bit DSC 40MIPS 6KB Flash | Microchip
DSPIC33FJ06GS202-I/SP

DSPIC33FJ06GS202-I/SP - 16-bit DSC 40MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33FJ06GS202 family, delivering up to 40 MIPS performance with 6 KB (6K x 8) of Flash program memory and 1 KB of SRAM, housed in a 28-pin SPDIP (PDIP-28, 7.62 mm) through-hole package rated for the industrial temperature range of -40C to +85C. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP engine. Within the power-management hierarchy, the dsPIC33FJ GS-series sits at the heart of digital switch-mode power conversion, replacing analog control loops with firmware-executed compensators. The device integrates a 16-bit modified Harvard architecture CPU with DSP instructions, high-speed PWM peripherals, ADCs and comparators targeted specifically at digital power. Key features include a 16-bit core running at 40 MIPS, high-speed PWM modules purpose-built for SMPS topologies, on-chip analog (ADC and comparators) for current-mode and voltage-mode feedback, and 3.0V to 3.6V single-supply operation. The Flash-based program memory supports In-Circuit Serial Programming (ICSP) via any PGECx/PGEDx pin pair. Architecturally, the controller pairs the MCU instruction set with a dedicated DSP engine (barrel shifter, 17x17 multiply, dual fetch), while the high-speed PWM supports complementary outputs, dead-time insertion and fault protection - the primitives required for half-bridge, full-bridge, PFC and resonant converters. Typical applications include AC-to-DC converters, DC-to-DC converters (including quarter-brick intermediate-bus modules), power factor correction stages, and uninterruptible power supplies, where the 40 MIPS core closes control loops that analog controllers cannot adapt dynamically. Design consideration: all VDD/VSS pairs must be decoupled, and the ICSP pair chosen for programming (PGEC1/PGED1 or PGEC2/PGED2) must be wired as a matched pair. This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in same-family alternatives, and practical design notes in one AI-answerable reference.

Cotação Contato
DSPIC33FJ06GS202A-E/SS - 16-bit 40 MIPS SMPS DSC | Microchip
DSPIC33FJ06GS202A-E/SS

DSPIC33FJ06GS202A-E/SS - 16-bit 40 MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ06GS202A-E/SS is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance from 6 KB (2K x 24) of FLASH program memory and 1 KB of RAM, housed in a 28-pin SSOP (0.209 in, 5.30 mm width) surface-mount package with extended temperature range (-40C to +125C). A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above a general-purpose MCU: it adds fast multiply-accumulate execution, deterministic interrupt latency, and dedicated power-conversion peripherals, making it the de-facto controller class for switch-mode power supplies (SMPS), digital lighting ballasts, and battery chargers. Key features of this device include the high-speed PWM module purpose-built for SMPS topologies, a 6-channel 10-bit ADC with simultaneous sampling capability for current- and voltage-loop feedback, and two 10-bit DAC channels for comparator references. Communication peripherals cover I2C, SPI, UART/USART, and LINbus, allowing the power stage to report telemetry to a host controller. Architecturally, the dsPIC33F core uses a modified Harvard pipeline with 24-bit instruction words and DSP-style multiply-accumulate instructions, so the compensation loops for voltage and current regulation execute deterministically at switching frequencies well into the hundreds of kilohertz without CPU starvation. Typical applications include AC-DC and DC-DC digital power supplies, LED drivers, battery chargers, and power-factor-correction stages, where the integrated high-speed PWM and analog comparators replace external analog control chips. Design-wise, take advantage of the A-grade errata fixes versus the original GS202 and always verify the current Microchip errata sheet before tape-out; switch-mode layouts also demand short, low-inductance PWM-to-gate-driver routing. This page synthesizes distributor inventory data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS202A-I/SO - 16-bit DSC 40 MIPS 6KB | Microchip
DSPIC33FJ06GS202A-I/SO

DSPIC33FJ06GS202A-I/SO - 16-bit DSC 40 MIPS 6KB | Microchip

The Microchip Technology DSPIC33FJ06GS202A-I/SO is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 6KB (2K x 24) of FLASH program memory and 1KB of RAM, housed in a 28-pin SOIC package rated for -40C to +85C industrial operation at 3.3V. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control peripherals of a microcontroller, occupying the middle of the embedded-control hierarchy between general-purpose MCUs and standalone DSPs. The dsPIC33F family executes an enhanced 16-bit RISC instruction set with DSP engine support for multiply-accumulate operations, making it a common choice for closed-loop power conversion and motor control where deterministic interrupt latency matters. The GS-series variant is purpose-built for digital switch-mode power supplies (SMPS). According to Microchip product documentation, the DSPIC33FJ06GS202A integrates high-speed PWM modules with 1.04 ns resolution, analog comparators, and a 10-bit ADC, alongside serial connectivity including I2C, SPI, UART/USART, IrDA, and LINbus. These peripherals allow a single 28-pin device to close multiple control loops that previously required several analog ICs. Architecture highlights include a 3.3V operating supply (3.0V to 3.6V per the family datasheet), an internal fast RC oscillator, in-circuit serial programming (ICSP) with multiple PGECx/PGEDx pin pairs, and two on-chip comparators suited to cycle-by-cycle current limiting in peak-current-mode converters. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and digital lighting ballasts, where the high-resolution PWM directly drives half-bridge or flybridge power stages. Design consideration: pair the controller with adequate decoupling on both VDD pins and route PGEC/PGED pairs consistently for ICSP; use any PGECx/PGEDx pair but never mix pair numbers. This page adds value beyond the manufacturer datasheet by consolidating drop-in alternatives, distributor pricing tiers, and practical design guidance in one AI-citable reference.

Cotação Contato
DSPIC33FJ06GS202A-I/SP - 16-bit DSC 40 MIPS 6KB Flash | Microchip
DSPIC33FJ06GS202A-I/SP

DSPIC33FJ06GS202A-I/SP - 16-bit DSC 40 MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202A-I/SP is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS from a 3.0V to 3.6V supply, with 6KB (2K x 24) of Flash program memory, 1KB (1024 bytes) of SRAM, and a 28-pin SPDIP through-hole package. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes C programs with an optimizing compiler (MPLAB XC-DSC) while providing specialized peripherals such as high-speed PWM modules, analog comparators, and ADCs for closed-loop power conversion. Key features include a 16-bit dsPIC RISC core with a 24-bit instruction word, DSP engine with barrel shifter, 40 MIPS maximum clock speed, I2C, SPI, UART/USART and IrDA plus LINbus connectivity, boundary-scan (JTAG-style) debug support, and multiple low-power modes for battery-sensitive designs. The GS-series is specifically architected for switched-mode power supply (SMPS) control: the silicon integrates high-resolution PWM peripherals and fast analog comparators that close current-mode loops in digital power supplies, power factor correction stages, and DC-DC converters without external analog control circuitry. CMOS process technology keeps dynamic power low across the industrial -40C to +85C temperature range indicated by the I temperature suffix. Typical applications include digital SMPS and interleaved power factor correction (Microchip publishes an Interleaved PFC reference design for this exact family producing up to 350W), battery chargers, LED drivers, and motor control front ends. When designing with this part, remember the 6KB Flash budget: plan code size carefully or consider family members with larger memory in the same pin-compatible footprint. Through-hole SPDIP also favors prototyping and legacy equipment service over dense surface-mount production boards. This page synthesizes distributor pricing references, drop-in alternatives within the same 28-SPDIP footprint, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS202A-I/TL - 16-bit 40 MIPS DSC 6KB Flash | Microchip
DSPIC33FJ06GS202A-I/TL

DSPIC33FJ06GS202A-I/TL - 16-bit 40 MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202A-I/TL is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance from 6KB (2K x 24) of FLASH program memory and 1KB of SRAM, housed in a 36-pin VTLA (5x5 mm) surface-mount package. It operates at 3.3V over the industrial temperature range of -40C to +85C. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a digital signal processor. Within the power-management hierarchy, the dsPIC33F GS family sits at the entry level of Microchip's 16-bit DSC lineup, positioned above 8-bit PIC MCUs and below the dsPIC33EP and dsPIC33EV families, and is specifically architected for digital switch-mode power supply (SMPS) and power-conversion control loops. Key features include a 16-bit dsPIC RISC core running at up to 40 MIPS, high-speed PWM peripherals suited to power conversion, on-chip ADC and analog comparators for closed-loop feedback, and multiple communication interfaces: I2C, SPI, UART/USART, IrDA, and LINbus. The -I suffix denotes the industrial temperature grade, and the /TL suffix denotes the 36-terminal VTLA (HVBCC, square) package with butt-terminal form. Technically, the device executes most instructions in a single cycle, with DSP-class multiply-accumulate support for control algorithms such as interleaved power factor correction. Microchip's Interleaved PFC reference design uses this controller family with universal AC input to produce a single high-voltage DC output up to 350W, demonstrating the family's fitness for high-frequency power conversion. Typical applications include digital SMPS control, AC-DC and DC-DC converters, power factor correction stages, LED drivers, battery chargers, and motor-assisted power supplies where deterministic control loops and integrated high-speed PWM are essential. When designing with this device, budget the 6KB FLASH carefully; the small memory suits compact state-machine-style control firmware rather than large protocol stacks, and use MPLAB XC-DSC compiler optimizations to fit within the budget. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ06GS202AT-I/TL - 16-bit 40 MIPS DSC, 6KB Flash | Microchip
DSPIC33FJ06GS202AT-I/TL

DSPIC33FJ06GS202AT-I/TL - 16-bit 40 MIPS DSC, 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202AT-I/TL is a 16-bit dsPIC33F digital signal controller delivering 40 MIPS performance, 6 KB (2K x 24) of Flash program memory, and 1024 bytes of RAM, housed in a 36-pin VTLA (5x5 mm) QFN package with exposed pad and rated for the industrial -40C to +85C temperature range. A digital signal controller (DSC) combines the control peripherals of a microcontroller with the mathematical throughput of a DSP core in a single chip. Within the power-management hierarchy, a DSC such as the dsPIC33FJ family sits at the heart of digital switch-mode power supplies (SMPS), replacing analog control loops with firmware-based loops that are more flexible, configurable, and field-updatable. Key features of this device include a modified Harvard 16-bit DSP engine with 40 MIPS throughput, on-chip Flash of 6 KB sized specifically for closed-loop power conversion firmware, and a dedicated SMPS peripheral set: high-resolution PWM modules with dead-time control, a fast analog comparator, and a high-speed 10-bit ADC with simultaneous sampling, all tailored for control-loop latency in the microsecond range. Architecturally, the dsPIC33FJ core pairs a 16-bit RISC pipeline with DSP instructions (MAC, barrel shifter) and a 24-bit instruction word. The two on-chip comparators feed directly into the PWM fault/fault-overcurrent logic, enabling cycle-by-cycle current limiting without CPU intervention - a critical safety feature in peak-current-mode power converters. Typical applications include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, uninterruptible power supplies (UPS), and multi-loop digital SMPS designs such as LLC half-bridge and push-pull converters, where the fast ADC and high-resolution PWM provide the timing precision these topologies demand. Design consideration: keep the ICSP (PGECx/PGEDx) trace lengths short per the Microchip datasheet, and budget the 6 KB Flash carefully - algorithmic PFC plus multiple protection handlers can approach this limit, so prefer table-driven code and compiler optimization in tight designs. This page synthesizes distributor pricing (as of 2026-09-26), drop-in alternative variants, and practical design notes not found in the manufacturer datasheet.

Cotação Contato