Microcontroladores

Produtos (18756)

DSPIC33FJ128MC804-H/ML - 16-bit 128KB Flash Motor Control DSC | Microchip
DSPIC33FJ128MC804-H/ML

DSPIC33FJ128MC804-H/ML - 16-bit 128KB Flash Motor Control DSC | Microchip

The Microchip DSPIC33FJ128MC804-H/ML is a 16-bit Digital Signal Controller (DSC) that fuses a dsPIC30/33-class DSP engine with PIC24/dsPIC33 MCU peripherals, housed in a 44-pin QFN (8x8 mm) exposed-pad package. It provides up to 128 KB of Flash program memory with a 24-bit instruction word width, 16 KB of on-chip SRAM, an 8-channel DMA controller, a 40 MHz maximum operating frequency, and dedicated Motor Control PWM peripherals that make it the central controller for high-speed, repetitive closed-loop motor control loops. The -H temperature grade designation supports an extended -40C to +150C ambient operating window targeting harsh-environment industrial and automotive under-hood deployments. According to Microchip documentation, the device is pin-compatible with the broader dsPIC33FJ128MC family in the same 44-pin QFN footprint, and shares a very high degree of compatibility with PIC24HJ and dsPIC30F families, enabling drop-in migration paths across controller tiers. The wide 3.0 V to 3.6 V core voltage range is typical for dsPIC33F-class devices. A Digital Signal Controller (DSC) is a hybrid MCU/DSP architecture that integrates a microcontroller's deterministic peripheral set with a digital signal processor's single-cycle MAC (multiply-accumulate) engine. In the broader taxonomy, a DSC sits between a microcontroller (MCU) and a pure DSP, belonging to the embedded controller category within the semiconductor hierarchy. DSCs are typically classified as: digital signal controller -> microcontroller/MCU -> embedded processor -> semiconductor. They are optimized for time-critical control loops where both fast math (filtering, FFT, Park/Clarke transforms) and deterministic IO (PWM, ADC, encoder) must be serviced inside tight control periods on the order of microseconds. Key features include an integrated DSP engine with single-cycle 16x16 MAC, dual 40-bit accumulators, and zero-overhead looping. Advanced analog is provided through a 10/12-bit ADC, multiple PWM channels with complementary outputs and dead-time control for three-phase motor drives, plus comparators and op-amps for current sensing. The device includes up to five 16-bit timers/counters, two serial I/O ports (typically configured as UART/SPI/I2C), and Peripheral Pin Select (PPS) remapping so any digital peripheral can be routed to most digital I/O pins. Architecturally, the 40 MHz core delivers 40 MIPS, with deterministic interrupt latency suitable for field-oriented control (FOC) loops that complete ADC conversion, math (Clark/Park transform), and PWM update within single-digit microseconds. The exposed thermal pad (EP) of the QFN-44 package provides a low thermal resistance path from die to PCB copper, essential for the -H grade's elevated ambient operating envelope. The 8-channel DMA engine offloads data movement between peripherals and SRAM, freeing the CPU for control math. Typical applications include precision motor control (BLDC, PMSM, ACIM, SRM) for industrial drives and appliance fans, automotive mechatronic modules operating under the -H temperature window, digital power conversion (PFC, LLC, full-bridge), and power-factor-corrected lighting ballasts. The DSP engine is also commonly used for sensorless motor control using observer-based back-EMF estimation. When designing with this device, follow Microchip's recommended PCB layout: stitch the EP to a large unbroken copper ground plane with at least 16 thermal vias on a 0.3-0.5 mm pitch, keep the decoupling ceramic (100 nF + 4.7 uF) within 2 mm of VDD/VSS pins, and place the analog AVdd filter ferrite bead close to the IC. Also place the analog reference decoupling (100 nF + 10 uF) at the AVdd/AVss pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet page alone.

Cotação Contato
DSPIC33FJ128MC804-H/PT - 16-bit DSC 128KB Flash Motor Control TQFP-44
DSPIC33FJ128MC804-H/PT

DSPIC33FJ128MC804-H/PT - 16-bit DSC 128KB Flash Motor Control TQFP-44

The Microchip Technology DSPIC33FJ128MC804-H/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, delivering 128KB of Flash program memory and 16KB of SRAM in a 44-pin TQFP (10x10 mm) package. The device operates from a 3.0V to 3.6V supply, executes instructions at 20 MIPS from a maximum 40 MHz internal clock, and integrates dedicated motor-control PWM, a 16-bit ADC, CAN, DMA, and a DSP engine optimized for high-speed repetitive computation. A Digital Signal Controller combines a microcontroller with a DSP engine. The MCU host supplies deterministic real-time control flow, while the on-chip DSP engine accelerates single-cycle MAC operations and zero-overhead looping for transforms, filters, and state estimators. Within the Microchip taxonomy this places the part in: DSC -> 16-bit MCU with DSP -> motor-control DSC -> dsPIC33F family. The same architecture underpins PIC24 and dsPIC30F migration paths, allowing designers to move code with minimal rework across families. Key features include 128KB (128K x 8) Flash, 16KB SRAM, 8 DMA channels, five 16-bit timers, two serial I/O ports, a 16-channel 10-bit ADC with 500 ksps conversion rate, dedicated Motor Control PWM (6 outputs), ECAN module, and an operating temperature range of -40C to +150C (H temp grade). On-chip peripherals are remapped through Peripheral Pin Select (PPS), giving the same silicon multiple pinout personalities. The dsPIC33F core is built on a Harvard architecture with 24-bit instruction and 16-bit data paths, using a modified Harvard memory layout and dual-port SRAM. The integrated 40 MHz oscillator with PLL plus the 17-bit x 17-bit single-cycle hardware multiplier deliver predictable real-time throughput for closed-loop field-oriented control (FOC) and digital filtering. Typical applications include 3-phase BLDC and PMSM motor drives, AC induction motor control, uninterruptible power supplies (UPS), power conversion, advanced sensorless control, industrial automation, and automotive body electronics. The CAN interface and high-temp H grade also suit chassis and traction-related nodes in commercial vehicles. When designing with this part, plan PWM dead-time, ADC sampling alignment, and DMA channel priority early. The PPS remapper is powerful but introduces pin-conflict analysis - locking the pin map before PCB layout avoids costly respins. At 40 MHz and full peripheral activity, use 4-layer routing to keep digital return currents away from the analog AVSS/AVDD pair. This page combines distributor pricing, AEO-optimized technical FAQ, drop-in replacement options, and engineering design notes that go beyond the manufacturer datasheet to support sourcing, comparison, and design decisions.

Cotação Contato
DSPIC33FJ128MC804-I/ML - 16-bit DSC 40MIPS 128KB Flash 44-QFN | Microchip
DSPIC33FJ128MC804-I/ML

DSPIC33FJ128MC804-I/ML - 16-bit DSC 40MIPS 128KB Flash 44-QFN | Microchip

The Microchip DSPIC33FJ128MC804-I/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, integrating a high-performance DSP engine with an enhanced MCU core. It runs up to 40 MIPS, includes 128 KB of Flash program memory and 16 KB of SRAM, and is housed in a 44-pin QFN (8x8 mm) package with 35 digital I/O pins. The device is engineered for high-speed, repetitive computation and closed-loop control. What is a Digital Signal Controller? A DSC combines a microcontroller's deterministic interrupt-driven control capability with a DSP's single-cycle MAC data path. In the signal-processing hierarchy it sits between a microcontroller (MCU) and a full DSP, making it the preferred choice for motor control, power conversion, and sensor-fusion applications where both control loops and signal math run concurrently. As a member of the dsPIC33F family, this part also shares peripheral and instruction-set compatibility with the PIC24HJ and dsPIC30F families, simplifying firmware migration. Key features include a built-in 16-channel, 10-bit/12-bit ADC with up to 500 ksps conversion rate, multiple PWM modules with dedicated Motor Control PWM outputs, 8 DMA channels, five 16-bit timers, and Peripheral Pin Select (PPS) for flexible digital-peripheral routing. Communication peripherals include UART, SPI, I2C, ECAN, and a Parallel Master Port, enabling integration into industrial and automotive embedded networks. The DSP engine features dual 40-bit accumulators and a single-cycle 16x16 MAC, supporting efficient real-time control loops. The advanced analog block combines high-speed ADCs with comparator outputs, while dedicated Motor Control PWM hardware drives 3-phase inverter stages with hardware dead-time insertion, fault inputs, and complementary outputs. Typical applications include BLDC/PMSM motor drives, sensorless field-oriented control (FOC), digital power converters (PFC, LLC, full-bridge SMPS), industrial variable-frequency drives, solar micro-inverters, and automotive sensor interfaces. The wide operating temperature range and low-power Idle/Sleep modes suit industrial and automotive environments. When designing with this part, ensure proper decoupling (0.1 uF + bulk) near VDD pins and follow Microchip's application note AN1078 (sensorless FOC) for tuning. The QFN thermal pad must be soldered to a continuous ground pour for thermal performance. This page synthesizes distributor pricing, drop-in same-package variants, and practical design notes not collated in the manufacturer datasheet, giving procurement and firmware teams an at-a-glance decision matrix.

Cotação Contato
DSPIC33FJ128MC804-I/PT - 16-bit DSC, 128KB Flash, 44-TQFP | Microchip
DSPIC33FJ128MC804-I/PT

DSPIC33FJ128MC804-I/PT - 16-bit DSC, 128KB Flash, 44-TQFP | Microchip

The Microchip DSPIC33FJ128MC804-I/PT is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from a 128 KB Flash program memory and 16 KB SRAM in a 44-pin TQFP (10x10 mm) package. The device integrates a DSP-enhanced Harvard architecture with a single-cycle MAC, hardware multiplier/accumulator, and up to 4M instruction words of linear program memory addressing for high-speed, repetitive control-loop math. A Digital Signal Controller (DSC) is a hybrid MCU/DSP class of microcontroller that combines a deterministic 16-bit microcontroller core with DSP-grade datapath elements (single-cycle 16x16 MAC, dual 40-bit accumulators, barrel shifter). DSCs sit in the hierarchy between general-purpose MCUs and standalone DSPs, and are most often used where a closed-loop control law must execute every PWM cycle. The dsPIC33F family in particular targets motor control, power conversion, and high-density sensor fusion. Key feature highlights of this part include up to nine 16-bit PWM outputs with dedicated Fault inputs, a 10-bit ADC at up to 1.1 Msps with as many as 13 input channels, two analog comparators, and a 16-bit/32-bit peripheral pin-select (PPS) remap engine for flexible I/O mapping. The part also exposes two UART, two SPI, and one I2C serial interface, plus a Parallel Master Port (PMP) for external bus expansion. On-chip oscillators and a 5-timer module (Timer1-5) are included; no external crystal is strictly required for full-speed operation. Architecturally, the part uses a modified Harvard bus with separate program and data paths, plus a DMA controller (8 channels) that offloads peripheral-data movement so the CPU is free to run control loops. The motor-control PWM (MCPWM) block supports complementary outputs with programmable dead-time, center-aligned or edge-aligned modes, and ADC triggering - a hardware-level combination that few general-purpose MCUs can match. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) sensorless FOC drives, solar micro-inverters and PFC stages, industrial PLCs, and digital power supplies. A common use is a 3-phase sensorless FOC running at 20 kHz PWM with the dsPIC doing Clarke/Park transforms and an SMO observer on top of the MCPWM and ADC. Design tip: when migrating from the dsPIC30F or PIC24 families, peripheral register maps and PPS I/O assignments differ - validate code on the new silicon. For multi-channel motor control, allocate DMA channels to ADC reads before the CPU touches them to keep ISR time below 5 us. This page combines datasheet specifications, distributor pricing tiers, and curated drop-in alternatives sourced from Microchip's dsPIC33F family - information synthesized for engineers evaluating this DSC for production designs.

Cotação Contato
DSPIC33FJ128MC804T-I/ML - 16-Bit DSC 40MIPS 128KB Flash Motor Control | Microchip
DSPIC33FJ128MC804T-I/ML

DSPIC33FJ128MC804T-I/ML - 16-Bit DSC 40MIPS 128KB Flash Motor Control | Microchip

The Microchip DSPIC33FJ128MC804T-I/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, integrating a 40 MIPS (40 MHz) DSP-enhanced CPU with 128 KB of Flash program memory and 16 KB of SRAM in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. This combination targets high-speed, repetitive math-intensive control loops typical of motor control, digital power conversion, and advanced sensor processing, all handled by a single chip that combines MCU determinism with DSP throughput. What is a DSC? A Digital Signal Controller is a microcontroller class that integrates a digital signal processor with a microcontroller on a single die. This hybrid architecture sits in the hierarchy as DSC -> MCU -> microprocessor -> semiconductor. Unlike a pure microcontroller, a DSC includes dedicated hardware multiply-accumulate (MAC) units, barrel shifters, and a DSP engine that allows single-cycle MAC operations, while retaining the deterministic interrupt response and rich peripheral set of an MCU. The dsPIC33F family specifically targets motor control and digital power, adding dedicated PWM, high-speed ADC, and quadrature encoder interfaces. Key features include 128 KB of self-programmable Flash, 16 KB of SRAM, up to 40 MIPS operation (16-bit native data path), an integrated 10-bit A/D converter capable of up to 1.1 Msps with up to 9 channels, motor-control PWM with up to 8 outputs, a hardware quadrature encoder interface, and 8-channel DMA for high-throughput data movement. The device also integrates CAN 2.0B, I2C, SPI, and UART interfaces, plus up to 35 digital I/O lines - features that reduce external component count in space-constrained designs. The architecture employs a modified Harvard bus with separate program and data paths. The DSP engine adds single-cycle 16x16 MAC plus 32-bit accumulator, allowing efficient execution of control loops - field-oriented control (FOC) for brushless DC motors, digital PFC, and audio processing run efficiently on this platform. The 40 MIPS sustained throughput means control-loop update rates of 20-50 kHz are typical, well above the 10 kHz floor needed for smooth torque in most motor control applications. Typical applications include brushless DC motor (BLDC) and PMSM drives using FOC, industrial servo control, switched-mode power supply (SMPS) digital control loops, automotive body and powertrain ECUs, and industrial sensor platforms that demand DSP throughput paired with low-latency I/O. When designing with this device, careful PCB layout around the exposed thermal pad is essential for heat extraction. The internal 1.1 Msps ADC, while fast, requires careful analog front-end conditioning and a clean analog ground to achieve rated ENOB at high sample rates - designers should follow Microchip's AN1078 (sensorless FOC) and AN1299 reference layouts for predictable results.

Cotação Contato
DSPIC33FJ128MC804T-I/PT - 16-bit 40MIPS DSC, 128KB Flash | Microchip
DSPIC33FJ128MC804T-I/PT

DSPIC33FJ128MC804T-I/PT - 16-bit 40MIPS DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33FJ128MC804T-I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family that integrates DSP compute power with MCU peripherals on a single die, delivering 40 MIPS at 40 MHz in a 44-pin TQFP (PT) 10x10 mm package. It features 128 KB of Flash program memory and 16 KB of SRAM data memory, providing ample headroom for closed-loop motor-control and power-conversion algorithms. The device is industrial-grade (I) with an operating temperature range of -40C to +85C and is offered in tape-and-reel (T) packaging. A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a Digital Signal Processor (DSP): it retains deterministic interrupt-driven MCU peripherals (timers, UART, I2C, SPI, PWM) while adding a hardware multiplier, barrel shifter and dual 40-bit accumulators that accelerate single-cycle MAC operations on fractional and integer data. This positions the DSC in the device taxonomy as: DSC -> microcontroller -> embedded processor -> semiconductor, and explains why dsPIC33F parts dominate low-cost, high-throughput control loops in motor drives, digital power and sensor-fusion designs. Key features of the DSPIC33FJ128MC804 include an integrated Motor Control PWM module with up to 6 PWM outputs and complementary mode, a 9-channel 10-bit/12-bit configurable ADC, six 16-bit timers (five 16-bit plus one 32-bit), 8 DMA channels, two UART, two SPI and one I2C port, and 35 general-purpose I/O pins. The wide 3.0-3.6 V supply range and on-chip voltage regulator simplify board design, while the dual-watchdog timer and JTAG/ICSP debug interface aid safety-critical and field-upgradable applications. Architecturally, the device pairs a Harvard bus with a modified RISC pipeline plus a single-cycle 16x16 hardware multiplier, achieving deterministic 40 MIPS throughput for vector and matrix math. Native fractional arithmetic (1.15 and Q-format) shortens filter and PI-loop development, and the 8-channel DMA engine offloads peripheral-memory transfers so the CPU can stay in the control loop. Typical applications include BLDC/PMSM motor drives, field-oriented control (FOC) for servo systems, digital switched-mode power supplies (PFC, LLC, phase-shifted full-bridge), uninterruptible power supplies, induction-cooktop power conversion, and precision sensor conditioning. Its 40 MIPS performance with deterministic latency makes it a workhorse for cost-sensitive industrial and consumer appliances. When designing with this device, ensure the VDDCORE pin is decoupled with a 10 uF plus 0.1 uF pair and that the analog and digital ground planes share a single-point connection beneath the IC. Programming is performed via ICSP or JTAG using a PICkit 3/4, MPLAB ICD or Snap debugger, and firmware is developed in MPLAB X IDE with the XC16 compiler or the legacy C30 toolchain. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ12GP201-E/SO - 16-bit DSC 12KB Flash 40MIPS | Microchip
DSPIC33FJ12GP201-E/SO

DSPIC33FJ12GP201-E/SO - 16-bit DSC 12KB Flash 40MIPS | Microchip

The Microchip Technology DSPIC33FJ12GP201-E/SO is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, featuring a high-performance modified Harvard CPU with DSP-enhanced instruction set, 12 KB of on-chip Flash program memory, 1 KB of RAM, and 40 MIPS execution speed at 40 MHz, all housed in an 18-pin SOIC package. What is a dsPIC33F Digital Signal Controller? A Digital Signal Controller is a hybrid class of embedded processor that combines the deterministic interrupt response and peripheral integration of a microcontroller with the computational throughput of a digital signal processor (DSP). The dsPIC33F family targets motor control, digital power conversion, and sensor signal conditioning, sitting in the taxonomy as MCU -> DSC -> 16-bit DSC -> dsPIC33F -> general-purpose variant. Compared to a plain 16-bit MCU, the dsPIC33F adds a single-cycle MAC (multiply-accumulate) engine and dual 40-bit accumulators, enabling real-time FIR/IIR filtering and PID loops without offloading to a separate DSP. Key features of this specific device include 21 general-purpose I/O pins, an enhanced 16-bit timer/capture/compare/PWM module set, a 10-bit A/D converter with up to 8 input channels, and on-chip nanoWatt power management modes that drop quiescent current dramatically during idle. The 12 KB Flash supports self-programming, and the 1 KB SRAM is dual-ported to the DMA engine for low-overhead data movement. At the architectural level, the modified Harvard bus gives the CPU simultaneous access to program and data memories, while the DSP engine exposes a single-cycle 16x16-bit MAC plus two 40-bit accumulators with saturation logic. This is what enables dsPIC parts to handle closed-loop motor control and PFC algorithms in firmware without an external math coprocessor. Typical applications include BLDC and PMSM motor control, sensorless fan/pump drives, digital power supply control loops, and industrial sensor signal conditioning. The 18-SOIC footprint suits cost-sensitive, space-constrained designs that still need DSP throughput. When designing with this part, evaluate supply voltage carefully: the device operates from 3.0 V to 3.6 V, so a regulated 3.3 V rail is mandatory. Plan oscillator routing early, since the internal FRC drift may require periodic recalibration against a stable reference for precision timing. This page synthesizes distributor pricing, drop-in same-brand alternatives, and practical design guidance not aggregated on any single distributor or manufacturer page, giving the engineer a single decision-ready reference.

Cotação Contato
DSPIC33FJ12GP201-I/SO - 16-bit DSC, 12KB Flash, 40 MIPS | Microchip
DSPIC33FJ12GP201-I/SO

DSPIC33FJ12GP201-I/SO - 16-bit DSC, 12KB Flash, 40 MIPS | Microchip

The Microchip DSPIC33FJ12GP201-I/SO is a 16-bit Digital Signal Controller (DSC) that combines DSP compute throughput with MCU peripheral integration, running up to 40 MIPS at a 40 MHz oscillator in an 18-pin SOIC package. It integrates 12 KB of Flash program memory and 1 KB of RAM, operates from a 3.0 V to 3.6 V supply, and supports the industrial -40C to +85C temperature range. A Digital Signal Controller is a hybrid class of microcontroller that adds a hardware single-cycle MAC (multiply-accumulate) engine, dual 40-bit accumulators, and a DSP-oriented instruction set to a traditional MCU core. DSCs occupy a specific position in the embedded hierarchy: above 8-bit MCUs (PIC16/PIC18), parallel to 16-bit MCUs (PIC24F/PIC24H), and below 32-bit MCUs (PIC32/MIPS M4K). The dsPIC33F family in particular targets 3.3 V designs that require deterministic DSP performance for motor control, power conversion, and audio processing, while keeping a seamless migration path to PIC24F, PIC24H, and dsPIC30F devices. Key features of the DSPIC33FJ12GP201-I/SO include the 40 MIPS CPU, 12 KB self-programmable Flash, 1 KB SRAM, 21 I/O pins, integrated 10-bit ADC with multiple input channels, three 16-bit timers, an input capture module, output compare/PWM module, I2C, SPI, and UART interfaces, plus a 16-bit dsPIC DSC core with DSP engine. The integrated peripherals make this part a strong fit for low-pin-count DSP applications where the MCU and signal-processing path must share a single chip. The architecture uses a modified Harvard bus with separate program and data paths, allowing the DSP engine to fetch two operands per cycle. This is what enables the 40 MIPS figure to also imply real-time DSP throughput: each instruction can perform a 16 x 16-bit multiply with 32-bit accumulation in one cycle, which is the foundation for digital filter, PID, and FFT routines used in closed-loop control and audio effects. Typical applications include BLDC/PMSM motor control, switched-mode power supply (SMPS) digital control loops, LED lighting drivers, Class-D audio amplifiers, sensor signal conditioning, and low-cost digital filters in industrial and consumer embedded products. Its 21 I/O pins and 18-pin SOIC footprint make it well suited to space-constrained designs that still need real-time signal processing. When designing with this device, ensure your MCLR, AVDD, and AVSS pins are properly decoupled with 100 nF and bulk capacitors, and reserve the SOT-23-compatible SOIC-18 footprint with 1.27 mm pitch so the same PCB can accept pin-compatible variants such as the DSPIC33FJ12GP202 or PIC24FJ12GA201 family members. This page synthesizes distributor pricing, drop-in compatible variants, application companion parts, and PCB-aware design notes that go beyond the manufacturer datasheet's pin and register tables, giving engineers an integrated reference for BOM selection and layout decisions.

Cotação Contato
DSPIC33FJ12GP201T-I/SO - 40 MIPS 16-bit DSC, 12KB Flash | Microchip
DSPIC33FJ12GP201T-I/SO

DSPIC33FJ12GP201T-I/SO - 40 MIPS 16-bit DSC, 12KB Flash | Microchip

The Microchip Technology DSPIC33FJ12GP201T-I/SO is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, delivering 40 MIPS of computational performance from a dsPIC core in an 18-pin SOIC package. The device integrates 12 KB of Flash program memory and 1 KB of RAM, operates from a 3.0 V to 3.6 V supply, and includes up to 21 programmable digital I/O pins with Peripheral Pin Select flexibility. The 'T' suffix indicates tape-and-reel packaging and the 'I' denotes an industrial -40 C to +85 C operating temperature range, while the '/SO' package code designates the 7.50 mm wide 18-SOIC footprint. A Digital Signal Controller (DSC) is a hybrid class of microcontroller that combines the deterministic interrupt response and peripheral set of a traditional MCU with the high-throughput multiply-accumulate (MAC) engine of a DSP. In the broader hierarchy, a DSC belongs to the microcontroller family, which itself sits under embedded processors and semiconductors. The dsPIC33F sub-family is the 3.3 V, 40 MIPS generation that brought single-cycle MAC and DSP-aware instruction set extensions to Microchip's PIC-compatible architecture, bridging 8-bit PIC and 32-bit PIC32 designs. Key features include 16-bit timers, a 10-bit ADC with multiple conversion channels, multiple communication peripherals (I2C, IrDA, SPI, UART/USART), brown-out detection, and nanoWatt power management. The Peripheral Pin Select (PPS) block allows remapping of digital peripherals to most I/O pins, simplifying PCB routing when peripherals must move due to layout constraints. Five-volt tolerant digital inputs ease interfacing to legacy 5 V logic. Typical applications include motor control (BLDC, PMSM, stepper), digital power conversion (SMPS, PFC), sensor signal conditioning, audio processing, low-cost DSP-enabled industrial control, and consumer appliance control boards. The 18-SOIC footprint is particularly attractive for cost-sensitive designs and hand-repairable prototypes where a through-hole-feel package is preferred over QFN. When designing with this part, ensure the MCLR pin is pulled high through a proper pull-up, place the required decoupling capacitors (typically 10 uF bulk + 0.1 uF ceramic) close to the supply pins, and respect the Flash programming voltage requirements on the ENVPP/VCAP pin configuration. The 'T' suffix is critical for SMT assembly - non-'T' variants ship in tubes. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, including cross-brand context engineers ask about.

Cotação Contato
DSPIC33FJ12GP202-E/ML - 16-bit DSC, 40 MIPS, 12KB Flash | Microchip
DSPIC33FJ12GP202-E/ML

DSPIC33FJ12GP202-E/ML - 16-bit DSC, 40 MIPS, 12KB Flash | Microchip

The Microchip DSPIC33FJ12GP202-E/ML is a high-performance 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, delivering 40 MIPS of processing power with 12 KB of on-chip Flash and 1 KB of SRAM in a 28-pin QFN (6x6 mm) package with exposed thermal pad. A Digital Signal Controller is a hybrid architecture that combines the deterministic interrupt response and rich peripheral set of a microcontroller with the single-cycle MAC (multiply-accumulate) engine of a DSP. Within the broader taxonomy, the dsPIC33F sits between general-purpose PIC24 MCUs and high-end dsPIC30F devices, optimized for embedded control loops that also require real-time signal processing - motor control, power conversion, and sensor fusion being canonical examples. The DSPIC33FJ12GP202 integrates a 16-bit timer/capture/compare module, multiple 10/12-bit ADCs with on-chip sample-and-hold, I2C, SPI, and UART peripherals, plus a nanoWatt power management unit that drops quiescent current below typical values during Sleep. The 40 MIPS core enables single-cycle 16x16-bit MAC operations and supports fractional (Q15) arithmetic natively for efficient DSP filter implementations. The "-E" suffix denotes the Extended industrial temperature grade (-40C to +125C), and the "/ML" suffix designates the 28-pin QFN surface-mount package. The device is part of a migration-friendly family: code can move to PIC24F, PIC24H, or dsPIC30F parts with compatible peripheral pin select mappings. Typical applications include sensor signal conditioning, BLDC/PMSM motor control (note: dsPIC33FJ12MC202 is the dedicated motor-control variant), digital power conversion, audio processing, and industrial automation control loops. The exposed pad on the QFN package is the primary thermal dissipation path and must be soldered to a sufficient copper pour on the PCB. Designers should plan for code-development using Microchip's MPLAB X IDE with the XC16 compiler, plus the dsPIC DSP library for filter and transform primitives. Note that the 'GP' (General Purpose) suffix here is distinct from the 'MC' (Motor Control) family - choose MC variants for advanced motor-control PWM with up to 6 outputs and complementary PWMs. This page synthesizes distributor pricing, same-family pin-compatible alternatives, and practical QFN PCB-layout guidance not aggregated elsewhere.

Cotação Contato
DSPIC33FJ12GP202-E/SS - 40 MIPS 16-bit DSC, 12KB Flash | Microchip
DSPIC33FJ12GP202-E/SS

DSPIC33FJ12GP202-E/SS - 40 MIPS 16-bit DSC, 12KB Flash | Microchip

The Microchip Technology DSPIC33FJ12GP202-E/SS is a high-performance 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, integrating a DSP engine with an MCU core and delivering up to 40 MIPS (Million Instructions Per Second) of processing throughput. Housed in a 28-pin SSOP (Shrink Small Outline Package), it provides 12 KB of Flash program memory (12K x 8) and 1 KB of SRAM, with up to 21 programmable digital I/O pins. A Digital Signal Controller (DSC) is a hybrid architecture that combines the deterministic interrupt response and peripheral set of a microcontroller with the single-cycle MAC (multiply-accumulate) DSP engine needed for high-speed math. Within the broader taxonomy, the dsPIC33F sits between traditional 16-bit MCUs (PIC24F/H) and higher-end 32-bit Cortex-M parts, making it a natural fit for cost-sensitive embedded signal processing where deterministic real-time behavior matters more than raw clock speed. Key features of this variant include the extended (E) operating temperature range of -40C to +125C, Peripheral Pin Select (PPS) for flexible digital peripheral remapping, 5V-tolerant digital inputs with 3.0-3.6V output drive, and the nanoWatt Technology power management suite for sleep-mode current reduction. The 40 MIPS core executes most instructions in one cycle, while the DSP engine adds a 40-bit accumulator and barrel shifter for sensor and audio DSP. Architecturally, the device uses a Harvard bus with separate program and data paths, a hardware DSP engine (single-cycle 16x16 MAC), and peripherals that include multiple timers, a 10-bit A/D converter (ADC) with up to 1 Msps, UART, I2C, SPI, and Input Capture/Output Compare/PWM modules. The E suffix designates the -40C to +125C industrial/automotive temperature range, and the SSOP package is the 28-pin 5.30 mm-wide Shrink Small Outline Package. Typical applications include automotive sensor signal conditioning, motor control preprocessing, low-cost audio processing, sensor fusion front-ends, and general-purpose embedded control where DSP math is needed. The extended temperature range also makes the part suitable for industrial and AEC-Q100-grade automotive deployments when paired with appropriate system-level qualification. When designing with this DSC, plan oscillator and PLL configuration carefully because MIPS scaling affects both DSP throughput and ADC acquisition timing. Use PPS to route digital peripherals to convenient pins without PCB rework, and observe the 5V-tolerant input and 3.3V output drive limits when interfacing to legacy 5V logic. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33FJ12GP202-I/ML - 16-bit DSC, 40 MIPS, 28-QFN | Microchip
DSPIC33FJ12GP202-I/ML

DSPIC33FJ12GP202-I/ML - 16-bit DSC, 40 MIPS, 28-QFN | Microchip

The Microchip Technology DSPIC33FJ12GP202-I/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, delivering 40 MIPS of processing performance in a 28-pin QFN (6x6 mm) package. It integrates a high-performance dsPIC33F CPU core with DSP engine, on-chip Flash program memory and SRAM, a 10-bit/12-bit ADC, multiple timers, and 21 general-purpose I/O pins. The supply range is 3.0 V to 3.6 V, and the part carries the -I (industrial) temperature grade of -40C to +85C. A Digital Signal Controller (DSC) is a hybrid class of microcontroller that pairs a deterministic 16-bit MCU core with a single-cycle multiply-accumulate (MAC) DSP engine. In the broader taxonomy, DSCs belong to microcontrollers -> embedded controllers -> signal-processing ICs, sitting between classical MCUs (no DSP throughput) and standalone DSPs (no MCU peripherals). The dsPIC33F family specifically targets cost-sensitive real-time control loops where the host MCU must also run a Kalman filter, an FFT, a power-control compensator, or audio/voice codecs concurrently with housekeeping tasks. Key features of the DSPIC33FJ12GP202-I/ML include up to 12 KB of Flash program memory, 1 KB of SRAM, a 10-bit A/D converter with up to 10 channels at 500 ksps, two comparators, a UART, an SPI, and an I2C port. The DSP engine executes a 16x16-bit MAC in one cycle, supports fractional (1.15) and integer arithmetic, and offers zero-overhead looping for FIR/IIR filter primitives. The CPU achieves deterministic 25 ns instruction cycle at 40 MIPS, with an on-chip 8 MHz internal RC oscillator that can be multiplied by the on-chip PLL. Typical applications include switched-mode power supply (SMPS) digital control, motor control for small BLDC/PMSM fans and pumps, sensor conditioning, audio processing (echo cancellation, equalization, noise suppression), and industrial sensor interfaces. The 40 MIPS budget is sufficient for running an FOC motor loop, a digital Class-D amplifier compensator, or a predictive maintenance vibration analysis alongside system management code. When designing with this device, ensure decoupling is generous (100 nF + 10 uF near VDD/AVDD pins) and that analog and digital ground planes are split under the QFN pad. The exposed thermal pad must be soldered to a copper pour of at least 1 sq. inch for reliable thermal performance. Programming is supported via ICSP over PGECx/PGEDx pins, and the part is compatible with the MPLAB X IDE, XC16 compiler, and Microchip's MPLAB Xpress cloud toolchain. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not all available from a single distributor page.

Cotação Contato
DSPIC33FJ12GP202-I/SO - 16-bit DSC, 40MIPS, 28-SOIC | Microchip
DSPIC33FJ12GP202-I/SO

DSPIC33FJ12GP202-I/SO - 16-bit DSC, 40MIPS, 28-SOIC | Microchip

The Microchip DSPIC33FJ12GP202-I/SO is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F general-purpose family, integrating a high-performance DSP engine with a single-cycle MCU core at up to 40 MIPS (10 MIPS per MHz when clocked at 40 MHz). Housed in a 28-pin SOIC package, it delivers DSP capability in a compact, surface-mount footprint with 21 programmable digital I/O pins. A Digital Signal Controller (DSC) is a hybrid microcontroller that combines a deterministic MCU instruction set with a dedicated DSP engine (single-cycle MAC, dual 40-bit accumulators, barrel shifter). It sits in the hierarchy: DSC -> microcontroller -> embedded processor -> semiconductor. DSCs are used where MCU bit-banging cannot meet real-time signal-processing bandwidth but a full DSP processor is overkill. Key features include 12 KB Flash program memory, 1 KB SRAM data memory, on-chip 16-bit timers, a 10-bit ADC with up to 1 Msps, plus DSP-oriented peripherals such as a motor-control PWM module (typical for the GP2 family naming). The device operates from 3.0 V to 3.6 V, supports industrial -40C to +85C, and offers 5V-tolerant digital inputs with 4 mA sink on all I/O pins for direct interface to external logic. The architecture is Harvard-based, with separate program and data buses, allowing simultaneous fetch of an instruction and a data operand. The DSP engine uses two 40-bit accumulators and a single-cycle 16x16-bit MAC, enabling efficient implementation of control loops, digital filters (FIR/IIR), and power-conversion math such as PID and space-vector modulation without software emulation overhead. Typical applications include digital power conversion (SMPS, PFC, LLC), LED lighting drivers, motor control (BLDC, PMSM, sensored/sensorless), sensor signal conditioning, audio processing, and industrial automation. The part is supported by Microchip's MPLAB X IDE, MPLAB XC16 compiler, and dsPIC33 DSP library for filter, FFT, and motor-control primitives. Designers should plan around the 28-pin SOIC budget, route VDD/VSS pairs with decoupling, and use Peripheral Pin Select to remap digital functions. For firmware migration, code is portable to dsPIC33FJ12GP201 (smaller Flash variant in the same family) and to PIC24F/H MCUs that share peripherals. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and design notes not found in the manufacturer datasheet, giving engineers an actionable buying and engineering reference in one place.

Cotação Contato
DSPIC33FJ12GP202-I/SP - 16-Bit DSC, 40 MIPS, 12KB Flash | Microchip
DSPIC33FJ12GP202-I/SP

DSPIC33FJ12GP202-I/SP - 16-Bit DSC, 40 MIPS, 12KB Flash | Microchip

The Microchip Technology DSPIC33FJ12GP202-I/SP is a 16-bit Digital Signal Controller (DSC) in the dsPIC33F family, delivering up to 40 MIPS of processing performance with an integrated DSP engine, packaged in a 28-pin SPDIP (Skinny Plastic DIP) through-hole format. The device integrates 12 KB of Flash program memory and 1 KB of RAM, providing the headroom required for digital-filter, control-loop, and motor-control firmware on a single chip. It is qualified for the industrial -40C to +85C operating range (I-temp suffix). A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP), combining deterministic interrupt-driven control with single-cycle MAC (multiply-accumulate) instructions for fixed-point DSP workloads. Within the broader hierarchy, this part sits as: dsPIC33F -> dsPIC33F General Purpose family -> 16-bit DSC -> microcontroller -> embedded processor -> semiconductor. The DSP engine operates on 16-bit data with 40-bit accumulators, giving the device the numerical headroom needed for cascaded biquad filters, FFT kernels, and PID-style compensators. Key features include 40 MHz maximum operating frequency (50 ns instruction cycle), 21 general-purpose I/O pins shared with peripheral functions, an on-chip 10-bit ADC with up to 1.1 Msps conversion rate, plus Motor-Control PWM, Input Capture, Output Compare, UART, SPI, I2C, and a 16-bit Timer module. Code security via Flash code-protect and a 16-bit wide instruction path round out the device. The 3.0 V to 3.6 V supply range and 21 I/O pins are characteristic of the GP (General Purpose) sub-family. Architecturally, the dsPIC33FJ12GP202 uses a Harvard architecture with separate program and data paths, allowing the DSP engine to fetch data while the CPU prefetches the next instruction. This dual-pipeline design eliminates stalls in tight DSP loops and supports zero-overhead looping, which is essential for deterministic real-time control. The on-chip 10-bit ADC and dedicated PWM modules are tuned for closed-loop motor and power-conversion feedback. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) sensorless field-oriented control (FOC), switched-mode power supply (SMPS) digital control loops, sensor signal conditioning with on-chip FIR/IIR filtering, and industrial sensor-interface nodes. The 12 KB program-memory budget is well-matched to small real-time control loops without requiring external memory. Pair this DSC with a gate-driver IC and a three-phase inverter stage to build a complete low-voltage motor drive. When designing with this part, place the 28-pin SPDIP socket on a 0.1-inch grid and provide a local 10 uF + 0.1 uF decoupling pair within 5 mm of VDD/AVDD. Use the on-chip FRC oscillator with PLL for free-running 40 MIPS operation, or attach an external 8 MHz crystal for precision timing in motor-control PWM modules. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ12GP202T-I/ML - 16-bit DSC, 40 MIPS, 12KB Flash | Microchip
DSPIC33FJ12GP202T-I/ML

DSPIC33FJ12GP202T-I/ML - 16-bit DSC, 40 MIPS, 12KB Flash | Microchip

The Microchip Technology DSPIC33FJ12GP202T-I/ML is a 16-bit Digital Signal Controller (DSC) that combines the performance of a DSP with the simplicity of a microcontroller, delivering 40 MIPS at up to 40 MHz and integrating 12 KB (12K x 8) of on-chip Flash program memory together with 1 KB of SRAM, all housed in a compact 28-pin QFN (6x6 mm) package. As part of the dsPIC33F general-purpose family, the device offers seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar pinouts, enabling designers to scale performance without redesigning the board. A Digital Signal Controller (DSC) is a hybrid architecture that augments a microcontroller's deterministic control peripherals with a true DSP engine capable of single-cycle MAC operations. DSCs sit hierarchically within the broader class of microcontrollers (MCU), which themselves belong to embedded processors, ultimately under the umbrella of semiconductors. They are typically deployed in closed-loop control and signal-conditioning applications where the math throughput of a DSP is needed alongside the interrupt-driven determinism of an MCU. Key differentiating features of the DSPIC33FJ12GP202T-I/ML include a high-performance modified Harvard CPU with a hardware multiplier, nanoWatt technology for power-managed sleep modes, 16-bit wide data path, and a peripheral set tailored to motor control and power conversion (the GP-family designation reflects this general-purpose emphasis). The integrated DSP engine executes single-cycle 16x16 MAC operations, enabling efficient implementation of digital filters, FFT kernels, PID loops, and field-oriented control (FOC) algorithms. Communication peripherals typically include UART, SPI, I2C and selectable 10/12-bit ADC channels. From an architectural standpoint, the dsPIC33F core uses a 24-bit instruction word with two 40-bit accumulators and a 16-bit working register array, providing exceptional dynamic range for fixed-point DSP. The Flash is rated for endurance suitable for in-application self-programming and bootloader use, while the nanoWatt power-management modes (Idle, Sleep and Deep Sleep) trade wake-up latency for quiescent current reduction. Typical applications span digital power conversion (SMPS, PFC), motor control (BLDC, PMSM, stepper), sensorless field-oriented control, LED lighting drivers, uninterruptible power supplies, and consumer audio effects processing. The 28-QFN footprint is particularly suited to space-constrained designs where DSP throughput is required on a small PCB area. The "T" suffix in the MPN denotes tape-and-reel packaging, "I" denotes the industrial -40C to +85C operating temperature range, and "ML" identifies the 28-pin QFN package. When designing with this part, place a 10 uF plus 0.1 uF decoupling pair adjacent to every VDD/AVDD pin, keep the analog and digital ground returns separated until they meet at a single-point star near the QFN thermal pad, and follow Microchip's recommended in-circuit serial programming (ICSP) layout for the PGECx/PGEDx pins to avoid programming failures in production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving an engineer a faster decision basis than the raw 28-QFN device documentation.

Cotação Contato
DSPIC33FJ12GP202T-I/SO - 40 MIPS 16-bit DSC, 12KB Flash, 28-SOIC
DSPIC33FJ12GP202T-I/SO

DSPIC33FJ12GP202T-I/SO - 40 MIPS 16-bit DSC, 12KB Flash, 28-SOIC

The Microchip Technology DSPIC33FJ12GP202T-I/SO is a 40 MIPS 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, combining DSP performance with MCU peripherals in a 28-pin SOIC wide (300 mil) package. It integrates 12 KB of Flash program memory, 1024 bytes of SRAM, and supports up to 21 programmable digital I/O pins while operating from a 3.0V to 3.6V supply. A Digital Signal Controller (DSC) is a hybrid class of microcontroller that adds single-cycle MAC (multiply-accumulate) DSP capability to a standard MCU core. The dsPIC33F architecture fuses a modified Harvard MCU with a DSP engine, making it suitable for closed-loop control, digital filtering, and audio/voice processing. Within the broader taxonomy, this places the device in the chain: dsPIC33F -> DSC -> microcontroller -> embedded processor -> semiconductor. Key specifications include a 40 MHz maximum operating frequency (40 MIPS), 16-bit data path, integrated peripherals such as a 10/12-bit ADC, timers, UART/SPI/I2C, and PWM outputs suitable for motor control and power conversion. The device also features nanoWatt power management for sleep modes, 5V-tolerant digital inputs, and Peripheral Pin Select (PPS) that remaps digital functions onto any I/O pin. The industrial -40C to +85C temperature range supports commercial and industrial deployment. The DSP engine executes a 16x16-bit signed fractional/integer MAC in a single cycle, enabling efficient IIR/FIR filtering, FFT, and PID control loops. Combined with deterministic interrupt latency, the architecture is well suited for real-time embedded control applications. Code compatibility with the PIC24F/PIC24H MCU and dsPIC30F DSC families enables seamless firmware migration across performance points. Typical applications include digital motor control (BLDC, PMSM, stepper), switched-mode power supply (SMPS) digital control loops, sensor signal conditioning, LED lighting control, and low-cost audio effects processing. The wide SOIC-28 footprint simplifies hand-prototyping and rework in low-volume designs. When designing with this device, ensure the 3.3V rail is well decoupled (10uF bulk plus 0.1uF ceramic near each VDD/VSS pair) and that unused I/O pins are configured as outputs to minimize current draw. Code protection fuses should be evaluated for production firmware security.

Cotação Contato
DSPIC33FJ12MC201-E/P - 16-bit Motor Control DSC, 12KB Flash | Microchip
DSPIC33FJ12MC201-E/P

DSPIC33FJ12MC201-E/P - 16-bit Motor Control DSC, 12KB Flash | Microchip

The Microchip Technology DSPIC33FJ12MC201-E/P is a 16-bit Digital Signal Controller (DSC) optimized for motor control applications, integrating DSP functionality with a high-performance MCU architecture in a 20-pin PDIP package. It features a 40 MHz operating speed, 12 KB Flash program memory, 1 KB RAM, and 16-bit working registers in the programmer's model. The device operates from a 3.0V to 3.6V supply and provides up to 21 I/O ports for interfacing with external motor drivers, sensors, and feedback circuits. A Digital Signal Controller (DSC) is a hybrid architecture that combines a microcontroller's deterministic control capabilities with a digital signal processor's computational throughput. Within the taxonomy, a DSC sits between microcontrollers and DSPs, enabling single-chip implementations of closed-loop control algorithms such as field-oriented control (FOC), space vector modulation, and PI/PID compensation. The dsPIC33FJ12MC201 belongs to the dsPIC33F family, which targets motor control, power conversion, and sensorless control applications with on-chip peripherals like PWM, ADC, and quadrature encoder interfaces. Key features of the DSPIC33FJ12MC201 include a 40 MHz clock with 16 MIPS instruction throughput, a single-cycle 16x16-bit hardware multiplier, and dual 40-bit accumulators that enable efficient DSP operations. The device includes a Flash-based program memory architecture, supporting in-circuit serial programming (ICSP) and runtime self-programming. Integrated peripherals include multiple PWM modules for three-phase motor drive, a 10-bit ADC with multiple channels, and UART/SPI/I2C communication interfaces for system connectivity. Technically, the DSPIC33FJ12MC201-E/P uses a modified Harvard architecture with separate program and data buses, allowing simultaneous fetch and access. The 'E' suffix indicates an extended operating temperature range of -40C to +125C, suitable for industrial and harsh-environment deployments. The device supports seamless migration options to PIC24F, PIC24H MCUs, and dsPIC30F DSCs in similar packages, enabling design reuse across product families. Typical applications include BLDC and PMSM motor controllers, sensorless fan and pump drivers, small appliance motor drives, and low-cost industrial automation modules. The 20-pin PDIP package suits through-hole designs, prototype boards, and educational development platforms where socketed mounting is preferred. When designing with this part, ensure proper decoupling of all VDD/VSS pairs and follow Microchip's dsPIC33F Family Reference Manual guidance for motor-control peripheral configuration. The PDIP package's larger thermal mass supports continuous operation without heatsinking at typical motor-control duty cycles. This page synthesizes distributor pricing, same-family drop-in alternatives from the Site MPN list, and practical motor-control design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33FJ12MC201-E/SO - 16-bit Motor Control DSC, 40MHz, 20-SOIC | Microchip
DSPIC33FJ12MC201-E/SO

DSPIC33FJ12MC201-E/SO - 16-bit Motor Control DSC, 40MHz, 20-SOIC | Microchip

The Microchip DSPIC33FJ12MC201-E/SO is a high-performance 16-bit Digital Signal Controller (DSC) engineered for motor control applications, integrating DSP functionality with a 16-bit MCU architecture. The device operates at up to 40 MIPS from a 3.0V to 3.6V supply, integrates 12 KB of Flash program memory, 1 KB of RAM, and is housed in a 20-pin SOIC (7.50 mm width) wide-body package. The -E suffix indicates an extended temperature grade of -40C to +125C suitable for industrial and harsh-environment deployments. A Digital Signal Controller (DSC) is a hybrid architecture that combines the deterministic interrupt response and peripheral set of a microcontroller with the single-cycle MAC, hardware loop buffer, and DSP arithmetic engine of a digital signal processor. In the broader taxonomy it sits between an MCU and a DSP, and within Microchip's portfolio it forms part of the dsPIC33F family targeting closed-loop control, power conversion, and motor drive. The DSPIC33FJ12MC201 in particular is the smaller Flash variant of the MC201/202 motor-control family, sharing peripheral IP with the larger dsPIC33FJ32 and dsPIC33FJ64 MC devices for seamless migration. Key features of the DSPIC33FJ12MC201 include a 40 MHz internal oscillator with PLL (giving 40 MIPS throughput), dual 16-bit analog comparators with programmable reference, a 10-bit ADC with 500 ksps, motor-control PWMs with complementary outputs and programmable dead time, plus a 16-bit motor-control PWM module. Communication peripherals include I2C, SPI, and UART interfaces. The 12 KB self-programmable Flash and 1 KB SRAM enable small-footprint field-oriented control (FOC) or trapezoidal BLDC algorithms with full state-machine handling on-chip. Architecturally, the device uses a modified Harvard bus with separate 16-bit data and 24-bit instruction paths, a 16 x 16-bit single-cycle MAC, and a 40-bit accumulator with barrel shifter. The C-compiler-friendly instruction set, sixteen 16-bit working registers, and zero-overhead hardware DO/REPEAT loops make it well suited to real-time control loops where deterministic instruction counts matter. Typical applications include sensorless and sensored BLDC/PMSM motor drives, low-voltage DC motor control, fan and pump controllers, small appliance motor drive, and switched-mode power supply digital control. The AEC-Q100 qualification (per third-party listings) also opens it to automotive body and HVAC actuator subsystems. A key design tip: keep the analog AVdd rail decoupled with a 10 uF bulk plus 0.1 uF ceramic placed within 5 mm of the AVdd pin, and avoid routing the PWM outputs adjacent to the analog comparator inputs to minimize switching noise coupling into the current-sense path. This page synthesizes distributor pricing, drop-in alternatives from the same dsPIC33FJ12MC family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33FJ12MC201-E/SS - 16-bit Motor Control DSC, 40MHz, SSOP-28 | Microchip
DSPIC33FJ12MC201-E/SS

DSPIC33FJ12MC201-E/SS - 16-bit Motor Control DSC, 40MHz, SSOP-28 | Microchip

The Microchip DSPIC33FJ12MC201-E/SS is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, featuring 12 KB Flash program memory, 1 KB RAM, a 40 MHz operating frequency, and integrated DSP functionality optimized for motor control. Housed in a 28-pin SSOP package with the -E (Extended) temperature grade of -40C to +125C, the device integrates a high-performance 16-bit modified-Harvard MCU core with DSP extensions, a 10-bit ADC, PWM modules, and a 16-bit motor-control PWM peripheral. A Digital Signal Controller (DSC) is a hybrid processor class that combines the deterministic interrupt response and peripheral set of a microcontroller (MCU) with the multiply-accumulate (MAC) throughput and single-cycle MAC hardware of a Digital Signal Processor (DSP). The dsPIC33F family is positioned in the hierarchy as: DSC -> 16-bit DSC -> dsPIC33F family -> motor-control DSC, sitting alongside general-purpose microcontrollers (MCU) in Microchip's portfolio and serving applications that require closed-loop control at high update rates (typically 10-50 kHz PWM). Key features of this part include a 40 MIPS CPU, single-cycle 16x16 MAC, dual 40 MHz 16-bit timers, a 6-channel motor-control PWM with complementary outputs and dead-time control, a 10-bit 1.1 Msps ADC with up to 6 analog inputs, and a 21-I/O count spread across the SSOP-28 footprint. The -E temperature grade extends the operating range to +125C, making the part suitable for under-hood automotive and harsh industrial environments. The architecture uses a 24-bit instruction word with a variable-length opcode field and a 16-bit data path. Program memory is Flash with self-programming support, and data EEPROM emulation is available. The motor-control PWM supports center-aligned, edge-aligned, and multi-mode operation with hardware fault inputs, eliminating software timing jitter in critical shutdown paths. Typical applications include BLDC and PMSM motor drives, sensorless and Hall-sensor FOC fan/ pump controllers, small appliance motor control, drone ESCs, automotive body electronics (door modules, mirror adjust), and HVAC blower control. The combination of deterministic PWM and DSP throughput makes the part well suited to field-oriented control (FOC) implementations on low-cost 3-phase inverter stages. When designing with the DSPIC33FJ12MC201, ensure the VDD/VSS decoupling follows the 100 nF + bulk capacitor recommendation from the datasheet and that the motor-control PWM fault pin is wired to the gate-driver fault output for hardware shutdown latency below 1 us. Plan code size against the 12 KB Flash limit; for state-space observers or sensorless FOC, the I/P or larger Flash variants in the family may be required.

Cotação Contato
DSPIC33FJ12MC201-I/SO - 16-bit Motor Control DSC, 40 MIPS | Microchip
DSPIC33FJ12MC201-I/SO

DSPIC33FJ12MC201-I/SO - 16-bit Motor Control DSC, 40 MIPS | Microchip

The Microchip DSPIC33FJ12MC201-I/SO is a 16-bit Digital Signal Controller (DSC) optimized for motor-control applications, integrating DSP and MCU functionality in a single 20-pin SOIC package. It features a 40 MIPS modified Harvard architecture, 12 KB Flash program memory, 1 KB RAM, and a high-performance 16-bit timer/capture/compare/PWM subsystem tailored for brushless DC, PMSM, AC induction, and switched reluctance drives. The variant suffix "-I/SO" denotes the industrial temperature grade (-40C to +85C) and the 0.300-inch wide 20-pin SOIC package with 7.5 mil pitch. A Digital Signal Controller (DSC) is a specialized microcontroller that combines a general-purpose 16-bit MCU core with hardware-level DSP capability (single-cycle MAC, barrel shifter, dual 40-bit accumulators) and tightly integrated analog/motor-control peripherals. In the broader taxonomy, the dsPIC33F family sits between 8/16-bit PIC microcontrollers and full DSP processors; it belongs to the power management > motor control IC family and is widely used as a cost-effective bridge between fixed-point DSP and standard MCU solutions. Key specifications include up to 21 I/O pins, six PWM channels with complementary or independent outputs, a 10-bit ADC with up to 500 ksps conversion rate, and 3.0 V to 3.6 V single-supply operation. The 16-bit DSC core performs single-cycle multiply-and-accumulate operations, while dual 40-bit accumulators enable fractional arithmetic and fast Park/Clarke transforms required for sensorless vector control. Hardware fault timers and dead-time control are integrated into the PWM module, simplifying UL/IEC 60730 safety-certified drive design. Typical applications include ceiling fan and pump variable-frequency drives, low-voltage BLDC motor controllers for appliances, hobby drones and RC ESCs, sensorless PMSM controllers for e-mobility auxiliaries, and small industrial servo drives. The wide operating voltage and robust motor-control PWM make it a strong fit for 12 V / 24 V / 48 V brushless platforms requiring deterministic real-time control. When designing with this part, allocate sufficient decoupling (100 nF ceramic plus 4.7 uF bulk) close to VDD/AVDD pairs, and keep the analog ground and digital ground returns separated until they join at the exposed pad or a single-point ground. Use Microchip's MPLAB X IDE with the XC16 compiler and the dsPICE FOC or Motor Control Library to accelerate algorithm development.

Cotação Contato
DSPIC33FJ12MC201T-I/SO - 16-bit 40MIPS 12KB Flash Motor Control DSC | Microchip
DSPIC33FJ12MC201T-I/SO

DSPIC33FJ12MC201T-I/SO - 16-bit 40MIPS 12KB Flash Motor Control DSC | Microchip

The Microchip Technology DSPIC33FJ12MC201T-I/SO is a high-performance 16-bit Digital Signal Controller (DSC) from the dsPIC33F family optimized for motor control applications, integrating DSP functionality with a 40 MIPS MCU core in a 20-pin SOIC (SO) package. The device features 12 KB Flash program memory, 1 KB RAM, and is offered in tape and reel packaging for high-volume assembly. A Digital Signal Controller (DSC) is a hybrid architecture that combines a microcontroller (MCU) control loop with a Digital Signal Processor (DSP) computation engine. DSCs sit in the hierarchy: microcontroller -> DSC -> DSP -> embedded processor, and are particularly well-suited to closed-loop control tasks where both deterministic real-time response and high-rate numerical computation are required simultaneously, such as field-oriented control (FOC) of three-phase motors. Key features include 16-bit data path, 40 MIPS execution, 21 I/O pins, an integrated 6-channel PWM module with dedicated motor-control peripherals, 12-bit ADC, and operation from 3.0 V to 3.6 V. The dsPIC33FJ12MC201 is specifically architected with motor-control centric peripherals including a Motor Control PWM (MCPWM) module, quadrature encoder interface (QEI), and high-speed analog comparators, eliminating external logic in typical BLDC and PMSM drive designs. Typical applications include sensorless and sensored BLDC motor drives, PMSM servo control, ceiling fans and pumps, e-bike controllers, small appliances, and DC-DC converter digital control loops. The 20-SOIC footprint simplifies hand prototyping and rework while still supporting the motor-control PWM duty cycles needed for switching frequencies above 20 kHz. Designers should provide adequate decoupling (100 nF + 10 uF bulk) close to VDD/AVDD pins and follow Microchip's dsPIC33F motor-control reference design layouts to minimize PWM glitch injection into the ADC sampling window. The 'T' suffix indicates Tape and Reel packaging, while the 'I' suffix indicates the -40C to +85C industrial temperature grade.

Cotação Contato
DSPIC33FJ12MC201T-I/SS - 40 MIPS Motor Control DSC | Microchip
DSPIC33FJ12MC201T-I/SS

DSPIC33FJ12MC201T-I/SS - 40 MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33FJ12MC201T-I/SS is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family optimized for motor control applications, delivering 40 MIPS at 40 MHz with 12 KB Flash and 1 KB SRAM in a 20-pin SSOP package. The part operates from 3.0 V to 3.6 V and exposes 13 I/O pins, making it suitable for compact BLDC, PMSM, AC induction, and stepper motor control boards where board area and BOM cost are tightly constrained. What is a DSC? A Digital Signal Controller (DSC) is a hybrid device that combines a microcontroller (MCU) with a digital signal processor (DSP) on a single die. In the taxonomy: DSC -> DSP+MCU hybrid -> microcontroller -> embedded processor -> semiconductor. DSCs execute deterministic motor-control algorithms like field-oriented control (FOC) and space-vector PWM at speeds that a generic MCU cannot reach, while retaining the interrupt structure, peripherals, and C-friendly toolchain of a microcontroller. The dsPIC33F family adds a 40-bit wide accumulator and dual-port SRAM, enabling 16-bit math with extended headroom for closed-loop current and torque loops. Key specifications include 12 KB on-chip Flash (11 K x 24 instruction words), 1 KB SRAM, 16-channel 10-bit ADC at 1.1 Msps (or 12-channel 12-bit ADC at 500 ksps on later revs), up to 6 PWM outputs with complementary mode and dead-band, plus a dedicated quadrature encoder interface. The device supports nanoWatt power-saving modes (idle, sleep, deep sleep), typically draws <50 mA active and low microamp sleep current, and is specified for -40 C to +85 C (industrial) per the -I suffix. The DSP engine executes one MAC per instruction cycle through its X and Y data read buses and a 40-bit dual-accumulator pipeline, allowing single-cycle FFT and IIR operations needed for sensorless FOC estimators. Hardware peripherals (PWM, ADC, QEI) are deterministic and tightly coupled to the motor-control loop, removing interrupt jitter that complicates time-critical switching on a generic MCU. Code is generated through MPLAB X IDE with the dsPIC DSC compiler suite and Motor Control Library, which ships drop-in FOC and scalar-V/Hz blocks tuned for this silicon. Typical applications include BLDC ceiling fans and HVAC blowers, low-voltage brushed-DC pumps, sensorless PMSM drives up to ~300 W, small appliances (mixers, blenders, vacuums), and battery-powered personal-mobility motors (e-bike torque-assist boards). Tape-and-reel packaging supports high-mix SMT assembly. Design consideration: route the analog ground and digital ground as a single point at the device's VSS pin and place the PWM dead-band configuration in SFR _FBCLKDIV before enabling the PWM generator to avoid first-cycle glitches. The Motor Control Library is revision-controlled; verify the algorithm revision and dsPIC DSC compiler version you re-use. This page combines distributor pricing, pinout detail, AEC-Q100-style grade indicators, and drop-in alternatives so an engineer can shortlist, validate, and order the part in a single workflow.

Cotação Contato
DSPIC33FJ12MC202-E/ML - 16-Bit Motor Control DSC, 40 MIPS, 28-QFN | Microchip
DSPIC33FJ12MC202-E/ML

DSPIC33FJ12MC202-E/ML - 16-Bit Motor Control DSC, 40 MIPS, 28-QFN | Microchip

The Microchip Technology DSPIC33FJ12MC202-E/ML is a 16-bit Digital Signal Controller (DSC) in the dsPIC33F family, optimized for motor-control applications and housed in a 28-pin QFN package (6x6 mm). It combines a high-performance 16-bit MCU architecture with on-chip DSP capability, achieving up to 40 MIPS throughput at a 3.3 V supply. The device integrates 12 KB of program Flash, 1 KB of SRAM, and a 16-bit nanoWatt technology power-management block, while its peripheral set includes dedicated motor-control PWM, a 10-bit ADC, and multiple timers. According to the Microchip dsPIC33FJ12MC201/202 datasheet, this part is a member of a seamless migration family that bridges to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages, giving designers a scalable upgrade path across motor-control platforms. What is a Digital Signal Controller? A DSC is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP): it executes deterministic control loops like an MCU while also performing real-time signal processing on motor currents, sensor feedback, and audio. Within the broader taxonomy, the DSC sits below the digital signal processor family and above the general-purpose microcontroller family in the embedded-semiconductor hierarchy, which itself belongs to integrated circuits in power-management-adjacent embedded systems. Key differentiating features include the dsPIC33F core with single-cycle 16x16 MAC, dual 40-channel motor-control PWM modules with flexible duty, dead-time and fault inputs, and an extended temperature range from -40C to +125C suitable for industrial and AEC-Q100-grade environments. The integrated nanoWatt power-management block provides multiple idle and sleep modes that reduce active current draw, while 16 KB of auxiliary Flash on select variants supports self-programming for field updates. The QFN-28 package exposes a thermal pad, lowering thermal resistance and enabling compact PCB layouts for high-density drives. Architecturally the device uses a Harvard bus with separate program and data paths, a hardware multiply-accumulate engine, and a peripheral engine that offloads PWM and ADC sequencing from the core, freeing MIPS for control algorithms. The 40 MIPS sustained throughput enables sensorless Field-Oriented Control (FOC) of three-phase BLDC and PMSM motors without external DSP co-processors, while integrated op amps on select signals reduce BOM. Typical applications include low-voltage three-phase BLDC and PMSM motor drives, ceiling fans and pumps, e-bike controllers, drone ESCs, and small appliance inverters. Industrial and automotive auxiliary drives such as HVAC blowers and power-window modules also benefit from the wide temperature range and robust PWM peripherals. The compact 28-QFN footprint suits space-constrained PCBs used in LED drivers and sensor hubs. When designing with this device, ensure the input supply is decoupled with both 100 nF and 10 uF capacitors placed close to the VDD pins and that the EP (thermal pad) is soldered to a sufficiently large copper pour to meet the datasheet's 31 C/W thermal resistance target. Designers should also budget adequate PWM timer headroom when using complementary outputs with dead-time insertion to avoid shoot-through. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33FJ12MC202-E/SO - 16-bit Motor Control DSC, 12KB Flash | Microchip
DSPIC33FJ12MC202-E/SO

DSPIC33FJ12MC202-E/SO - 16-bit Motor Control DSC, 12KB Flash | Microchip

The Microchip DSPIC33FJ12MC202-E/SO is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ12MC family, integrating DSP functionality with a high-performance 16-bit MCU architecture optimized for motor control. Operating at up to 40 MIPS with a 40 MHz core clock, the device integrates 12 KB of Flash program memory and 1 KB of SRAM in a 28-pin SOIC wide-body (SO) package. Its 16-bit architecture with DSP extensions delivers deterministic motor-control throughput at 3.0V to 3.6V single-supply operation. A digital signal controller (DSC) is a class of microcontroller that combines a standard MCU instruction set with a dedicated DSP engine, enabling real-time control loops, digital filtering, and power-conversion math on a single chip. Within the broader taxonomy, the dsPIC33FJ12MC202 belongs to the DSC -> microcontroller -> embedded controller -> semiconductor hierarchy, sitting between general-purpose MCUs and standalone DSPs. This architecture makes it ideal for time-critical closed-loop applications such as BLDC, PMSM, and AC induction motor drives. Key differentiating features include a 6-channel PWM module dedicated to motor control with complementary or independent output modes, a 10-bit ADC with up to 8 channels and 1.1 Msps conversion, a 16-bit timer/capture/compare block, and three 16-bit general-purpose timers. The nanoWatt power management unit provides Idle, Sleep, and Deep Sleep modes with sub-microamp standby current, allowing battery-backed designs to retain state without significant drain. Communication interfaces include UART, SPI, and I2C for telemetry and supervisory control. Typical applications cover brushless DC motor drives, sensorless PMSM controllers, low-cost field-oriented control (FOC) platforms, appliance pumps and fans, robotic servo loops, and automotive body modules. The 28-SOIC footprint simplifies PCB layout for through-hole-style prototyping while still supporting surface-mount assembly. Compared to PIC24F/H MCUs of the same pin package, the dsPIC33FJ12MC202 adds the DSP engine and dedicated PWM; relative to dsPIC30F DSCs, the '33FJ series offers faster ADC, lower power, and shorter interrupt latency. Design considerations include ensuring adequate decoupling on AVDD/VDD rails, placing the 28-SOIC on at least 4-layer PCB to keep ground bounce under control during high-current PWM switching, and using the JTAG/ICSP interface for firmware development. The -E industrial temperature grade supports -40C to +125C operation, making the part suitable for harsh-environment industrial and under-hood automotive subsystems. This page synthesizes distributor pricing, drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and design-in decisions.

Cotação Contato