Microcontroladores

Produtos (18756)

DSPIC33FJ32GP101T-I/SO - 16-bit 16 MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32GP101T-I/SO

DSPIC33FJ32GP101T-I/SO - 16-bit 16 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP101T-I/SO is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 16 MIPS performance with 32KB (11K x 24) of FLASH program memory and 2KB of RAM, housed in an 18-pin SOIC (7.50mm width) surface-mount package. Operating from a 2.5V to 3.3V supply, this Tape and Reel industrial-grade device (I suffix, -40C to +85C) combines microcontroller control with DSP capability in a single chip. A Digital Signal Controller is a hybrid of a microcontroller (MCU) and a digital signal processor (DSP). While an MCU handles general-purpose control tasks and a DSP excels at high-speed math, a DSC like the dsPIC33F family provides both: a 16-bit modified Harvard architecture CPU with DSP-engine instructions (MAC, dual operand fetch, 40-bit accumulators) plus peripherals such as ADCs, UARTs, SPI, I2C, and PWM outputs used in embedded control systems. Key features include the 16 MIPS dsPIC33F core with C compiler efficiency, 32KB self-programmable FLASH with 11K x 24 instruction-word organization, 5V-tolerant I/O pins, up to three external interrupts (two remappable), selectable open-drain outputs and internal pull-ups, and In-Circuit Serial Programming (ICSP) plus in-circuit debugging via just two device pins using tools such as the MPLAB SNAP. Architecturally, the dsPIC33F executes most instructions in a single cycle from a 24-bit instruction word. The DSP engine concurrently fetches two data operands while multiplying two W registers and accumulating the result, enabling efficient digital filter algorithms and high-speed precision control loops. Seamless migration paths exist to PIC24F/PIC24H MCUs and dsPIC30F DSCs, protecting software investment. Typical applications include motor control, digital power supplies, sensor signal conditioning with on-chip digital filtering, and embedded industrial control where deterministic DSP performance is needed under pressure. The 18-pin SOIC suits cost- and space-sensitive designs that still require genuine DSP throughput. Design consideration: the core is powered through an internal regulator - connect the VCAP pin to a low-ESR capacitor as specified in the datasheet; the device is rated for 3.3V operation and I/O must respect 5V-tolerant pin assignments. This page synthesizes distributor availability, drop-in alternatives, design guidance, and AEO-optimized Q&A not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP101T-I/SS - 16-Bit 16 MIPS 32KB DSC | Microchip
DSPIC33FJ32GP101T-I/SS

DSPIC33FJ32GP101T-I/SS - 16-Bit 16 MIPS 32KB DSC | Microchip

The Microchip Technology DSPIC33FJ32GP101T-I/SS is a 16-bit dsPIC33F general-purpose digital signal controller (DSC) delivering 16 MIPS of performance with 32KB (11K x 24) of FLASH program memory and 2KB (1K x 16) of RAM, housed in a 28-pin SSOP surface-mount package with 0.65mm terminal pitch. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. In the embedded hierarchy, this device sits between simple MCUs and full DSPs: its modified Harvard RISC core executes most instructions in a single cycle, making it well suited for digital filter algorithms and high-speed precision digital control loops that need to perform under pressure. Key features include a 16-bit dsPIC core rated at 16 MIPS, 32KB of self-programmable FLASH organized as 11K x 24, 2KB of on-chip RAM, operation from a nominal 3.3V supply (3.0V to 3.6V), and industrial temperature support from -40C to +85C. The device supports In-Circuit Serial Programming (ICSP) and in-circuit debugging through tools such as the MPLAB SNAP, which connects via a simple interface using two device I/O pins plus the reset line. The dsPIC33F architecture includes a DSP engine with hardware multiply-accumulate support, enabling efficient execution of FIR/IIR filters and PID control loops. Peripherals are arranged with Peripheral Pin Select (RPn remappable pins), letting designers route digital functions to available physical pins - valuable in compact 28-pin designs. Typical applications include motor-adjacent general-purpose control, power-supply digital control loops, sensor conditioning with digital filtering, industrial automation nodes, and portable instrumentation where 3.3V low-power operation is required. Design consideration: the dsPIC33FJ32GP101 family is a mature series; check lifecycle status for your production window and prefer the -E/SS extended-temperature variant when designs must span -40C to +125C. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33FJ32GP102-E/ML - 16-bit DSC 32KB Flash 16MIPS QFN-28 | Microchip
DSPIC33FJ32GP102-E/ML

DSPIC33FJ32GP102-E/ML - 16-bit DSC 32KB Flash 16MIPS QFN-28 | Microchip

The Microchip Technology DSPIC33FJ32GP102-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33FJ General Purpose family, executing up to 16 MIPS with 32KB (11K x 24) of Flash program memory, 2KB of RAM, and a 3.3V supply, housed in a 28-pin VQFN (6x6 mm) package with exposed pad and extended temperature rating (-40C to +125C). A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. The dsPIC33 family sits between general-purpose MCUs and dedicated DSPs in the embedded hierarchy: a 16-bit CPU, hardware multiply-accumulate (MAC), and division support let it run digital filters and high-speed control loops that would overwhelm an 8-bit MCU, while retaining Flash memory, interrupts, and peripheral sets familiar to MCU designers. Program with MPLAB X IDE using XC16 compiler; debug and flash via ICSP with tools such as MPLAB SNAP or ICD. Key features include the 16 MIPS core at 3.3V, 32KB self-programmable Flash, 2KB RAM, up to three 16-bit timers, output-compare and input-capture channels, a 10-bit ADC (up to 500 ksps) with multiple conversion channels, UART and SPI/I2C peripherals, and remappable peripheral pins (PPS) that let engineers route UART, SPI, and other digital functions to flexible I/O. Five-volt-tolerant pins and up to 20 selectable open-drain outputs with internal pull-ups simplify 5V legacy interfacing. The dsPIC33F core uses a modified Harvard architecture with a 24-bit instruction word and DSP engine providing single-cycle MAC and dual data fetches, which is what allows deterministic execution of FIR/IIR filter taps and PID loops at full 16 MIPS speed. Typical applications include motor control and digital power supplies, sensor signal conditioning with on-board filtering, industrial automation nodes, and consumer appliances requiring precise closed-loop control. The -E/ML extended temperature and AEC-Q100 qualification per distributor listings make it suitable for automotive and harsh-environment designs. Design tip: allocate the ADC sampling and PWM peripheral timings so control-loop ISR execution stays below 50% of CPU cycles, leaving headroom for communication stacks. This page synthesizes distributor pricing context, verified drop-in alternatives within the dsPIC33FJ 28-QFN family, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP102-E/SO - 16-Bit DSC 32KB Flash 28-SOIC | Microchip
DSPIC33FJ32GP102-E/SO

DSPIC33FJ32GP102-E/SO - 16-Bit DSC 32KB Flash 28-SOIC | Microchip

The Microchip Technology DSPIC33FJ32GP102-E/SO is a 16-bit dsPIC33F digital signal controller running at 16 MIPs with 32 KB (11K x 24) Flash program memory and 2 KB RAM, housed in a 28-pin SOIC Wide (SOIC-28) package. It combines a modified RISC DSP core with a full microcontroller peripheral set, targeting embedded motor control, digital power conversion, and sensor-processing designs that need DSP math throughput at MCU power budgets. A digital signal controller (DSC) is a hybrid device that merges the arithmetic engine of a digital signal processor (DSP) - single-cycle multiply-accumulate, barrel shifting, and fractional fixed-point math - with the timers, serial ports, ADC, and interrupt structure of a microcontroller (MCU). In the silicon taxonomy, a DSC sits between a general-purpose MCU and a dedicated DSP: it is a microcontroller with DSP instructions, or equivalently a DSP with MCU peripherals. The dsPIC33F family is Microchip's 16-bit DSC line, and the 'GP' suffix denotes the general-purpose variant of the dsPIC33FJ32GP102. Key differentiators of the DSPIC33FJ32GP102-E/SO include its 16 MIPs core throughput at 3.3 V, 32 KB Flash with 2 KB SRAM, a 10-bit ADC subsystem, and up to 35 general-purpose I/O pins on the 28-pin SOIC footprint. The 'E' temperature suffix denotes the extended industrial range of -40C to +125C, making the device suitable for thermally demanding embedded designs. The 28-pin SOIC Wide package allows conventional surface-mount assembly without fine-pitch BGA or QFN rework. The dsPIC33F core executes most instructions in a single cycle and provides hardware support for 16x16-bit multiplication and 32-bit accumulation, which accelerates PID control loops, digital filters, and Park/Clarke transforms used in field-oriented motor control. On-chip Flash supports in-circuit serial programming and self-programming, enabling field firmware updates. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, digital power supplies and DC-DC converters, industrial sensor conditioning, and automotive body electronics. The extended temperature rating and 3.3 V operation fit 24 V industrial buses and 12 V automotive rails with appropriate regulation. When designing with this device, keep the analog supply and ADC reference decoupled close to the pins, and reserve the SOIC-28 land pattern for adequate thermal relief. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP102-E/SP - 16-bit DSC 32KB Flash 16 MIPS | Microchip
DSPIC33FJ32GP102-E/SP

DSPIC33FJ32GP102-E/SP - 16-bit DSC 32KB Flash 16 MIPS | Microchip

The Microchip Technology DSPIC33FJ32GP102-E/SP is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ General Purpose family, delivering up to 16 MIPS at 32 MHz, with 32 KB (11K x 24) of Flash program memory, 2 KB of RAM, and 3.3V operation, housed in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package rated for -40C to +125C (E temperature grade). A Digital Signal Controller combines the compute architecture of a microcontroller with DSP-oriented features such as a hardware multiply-accumulate (MAC) engine, making it a hybrid between an MCU and a DSP. Within the power-management and control-system hierarchy, the dsPIC33F family sits alongside PIC24 16-bit microcontrollers, sharing the same core and peripherals but adding DSP instructions and a 40-bit wide accumulator for digital filter algorithms and high-speed precision digital control loops. Key differentiating specifications include the 16 MIPS dsPIC33 core with RISC instruction set, 32 KB self-programmable Flash, 5V-tolerant I/O pins on selected pins, up to 20 selectable open-drain outputs, and three external interrupts (two remappable) with Peripheral Pin Select (PPS) remapping that lets designers route UART, SPI, I2C, and input-capture functions to flexible pins. Architecturally, the device executes DSP filter algorithms and tight control loops efficiently thanks to single-cycle MAC, bit-reversed addressing, and dual operands, while the 2 KB RAM buffers control variables and communication frames. In-Circuit Serial Programming (ICSP) and In-Circuit Debug via MPLAB SNAP (or PICkit 3/4) use just two device I/O pins plus MCLR, easing field updates. Typical applications include digital power supplies, motor control assists, sensor signal conditioning with digital filtering, industrial automation nodes, and general-purpose embedded control where 16-bit math throughput at 3.3V is required. Design consideration: because this is the /SP through-hole SPDIP package in the extended-temperature E grade, verify board thermal targets and note the 3.3V supply rail tolerance when interfacing to 5V peripherals; 5V-tolerant input pins simplify such level interfacing without level shifters. This page synthesizes distributor pricing, drop-in same-package alternatives, pinout data, and practical design notes not consolidated on the manufacturer product page.

Cotação Contato
DSPIC33FJ32GP102-E/SS - 16-Bit 16 MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32GP102-E/SS

DSPIC33FJ32GP102-E/SS - 16-Bit 16 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP102-E/SS is a 16-bit digital signal controller (DSC) delivering up to 16 MIPS at 3.0 V to 3.6 V operation, with 32 KB (11K x 24) of FLASH program memory and 2 KB of RAM, housed in a 28-pin SSOP surface-mount package with 0.65 mm lead pitch and extended temperature rating (-40C to +125C). A digital signal controller combines the compute throughput of a digital signal processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). Within the power management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, and belongs to Microchip's dsPIC33FJ family of 16-bit flash-based controllers programmed through the MPLAB X IDE. Key features include a 16-bit CPU core executing DSP-class instructions such as multiply-accumulate (MAC) for digital filter algorithms, remappable peripheral I/O (RPn pins) that lets designers route peripherals to any compatible pin, 5V-tolerant input pins rated to 20 mA sink current with selectable open-drain outputs and internal pull-ups, three external interrupt sources (two remappable), and in-circuit plus in-application programming (ICSP and IAP) with up to three complex data breakpoints and run-time watch. Architecturally, the dsPIC33FJ32GP102 executes digital filter algorithms and high-speed precision digital control loops efficiently, which is exactly the workload profile Microchip designed the dsPIC33F series for. The flash-based program memory supports field upgrades, and the debug infrastructure (trace and run-time watch) shortens firmware bring-up when used with MPLAB Snap or compatible in-circuit debuggers. Typical applications include digital power supplies and power conversion, sensor signal conditioning and digital filtering, motor-adjacent general-purpose control, and embedded systems that need DSP arithmetic without a separate DSP chip. For design, note the strict 3.0 V to 3.6 V supply window; provide a regulated 3.3 V rail and place 0.1 uF decoupling close to each VDD pin. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP102-I/ML - 16-Bit DSC 16 MIPS 32KB Flash | Microchip
DSPIC33FJ32GP102-I/ML

DSPIC33FJ32GP102-I/ML - 16-Bit DSC 16 MIPS 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP102-I/ML is a 16-bit Digital Signal Controller (DSC) delivering up to 16 MIPS from a dsPIC33F core, with 32KB (11K x 24) of Flash program memory, 2KB of RAM, and a wide 3.0V to 3.6V operating supply, housed in a 28-pin VQFN (6x6 mm) exposed-pad package rated from -40C to +85C. A Digital Signal Controller combines the peripheral set and deterministic architecture of a microcontroller with the multiply-accumulate (MAC) engine of a DSP. In the power-management hierarchy, the dsPIC33FJ family sits between general-purpose MCUs (such as PIC18) and dedicated DSPs, making it a natural fit for real-time control loops where both firmware flexibility and math throughput are required. Key features include the 16-bit modified Harvard core with DSP instruction support (40-bit accumulators, single-cycle MAC), industrial temperature rating (I-suffix, -40C to +85C), a 10-bit ADC with simultaneous sampling capability, multiple UART/SPI/I2C serial ports with remappable peripheral pins (PPS), and in-circuit serial programming (ICSP) via MPLAB tools including MPLAB Snap and PICkit programmers. Architecturally, the dsPIC33FJ32GP102 executes most instructions in a single cycle at up to 16 MIPS (32 MHz oscillator with PLL), with hardware divide and modulo addressing for efficient filter implementations such as FIR/IIR. Flash program memory is self-writable, enabling field upgrades, and code protection options secure proprietary firmware. Typical applications include digital power supplies and PFC converters, motor control (BLDC/ACIM), sensor signal conditioning and filtering, industrial automation nodes, and portable instrumentation where deterministic interrupt latency and DSP math are valuable. Design consideration: the VQFN exposed pad should be soldered to a grounded copper pour for thermal relief and signal integrity, and the 3.3V rail requires 0.1uF decoupling on every VDD pin pair per Microchip layout guidelines. This page adds value beyond the Microchip datasheet by synthesizing distributor pricing, verified drop-in alternatives, and practical design notes in one citable reference.

Cotação Contato
DSPIC33FJ32GP102-I/SS - 16-Bit 16 MIPS DSC, 32KB Flash | Microchip
DSPIC33FJ32GP102-I/SS

DSPIC33FJ32GP102-I/SS - 16-Bit 16 MIPS DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP102-I/SS is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 16 MIPS at 3.3V, with 32KB (11K x 24) of Flash program memory, 2KB of RAM, and a 28-pin SSOP surface-mount package rated for -40C to +85C industrial operation. A digital signal controller combines the computational core of a 16-bit microcontroller with DSP-grade features such as a hardware barrel shifter, fixed-point multiply-accumulate support, and a modified Harvard multiple internal bus architecture. In the system hierarchy, a DSC sits between general-purpose MCUs and dedicated DSP chips, offering real-time control loops and digital filtering in a single low-cost device. Key features include the 16-bit dsPIC33F CPU running at up to 16 MIPS from an internal or external clock, 32KB self-programmable Flash with in-circuit and in-application programming, 2KB of RAM, three external interrupts (two remappable), and Peripheral Pin Select (RPn remappable pins) that let designers route digital peripherals to flexible I/O locations. The device also provides 5V-tolerant pins, selectable open-drain outputs, and on-chip pull-ups, easing 3.3V to 5V mixed-signal integration. Architecturally, the CMOS dsPIC33F core uses a fixed-point pipeline with DSP instruction support, enabling efficient FIR/IIR filtering, PID control, and fast Fourier routines. The remappable peripheral fabric and multiple data breakpoints support compact yet responsive embedded control firmware, programmed and debugged through the MPLAB X IDE with low-cost tools such as MPLAB Snap. Typical applications include digital power supplies and power-factor-correction loops, motor control and BLDC drives, sensor signal conditioning and digital filtering, and portable instrumentation, where the combination of 16 MIPS throughput and a small 28-pin footprint fits space-constrained industrial designs. A key design consideration is supply range: the device operates from 3.0V to 3.6V (2.5V/3.3V class), so 5V systems require level shifting or the 5V-tolerant input pins where permitted. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP102T-I/ML - 16-Bit 16 MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32GP102T-I/ML

DSPIC33FJ32GP102T-I/ML - 16-Bit 16 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP102T-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33FJ32GP102 family delivering 16 MIPS performance, 32KB (11K x 24) of Flash program memory, and 2KB of RAM, housed in a 28-pin VQFN (ML) 6x6 mm package with exposed thermal pad and operating from a 3.3V supply at up to 32 MHz Fcy-based clocking. A digital signal controller combines the compute architecture of a microcontroller with DSP-grade math capability. In the product hierarchy, the dsPIC33F sits between general-purpose MCUs and dedicated DSPs: it executes a modified Harvard, 16-bit instruction-word/24-bit data-word pipeline with hardware DSP multiply-accumulate (MAC) instructions, making it a single-chip solution for motor control, digital power, and signal conditioning where both control logic and fast math are needed. Key differentiating features include the 40-bit accumulator DSP engine with single-cycle MAC, hardware division support, 16 MIPS sustained throughput, and the Peripheral Pin Select (PPS) scheme that lets designers remap digital peripherals to available I/O pins - a major advantage in pin-limited 28-pin packages. On-chip peripherals include UART, SPI, and I2C ports, input capture/output compare channels, a high-speed 10-bit ADC, and an on-chip regulator requiring only a single external capacitor on the VCAP pin. Architecturally, the dsPIC33F core runs from an internal fast RC oscillator or external crystal/PLL combinations, providing flexible clock generation up to the rated MIPS ceiling. In-Circuit Serial Programming (ICSP) and in-circuit debugging are supported via just two I/O pins plus reset, compatible with low-cost tools such as MPLAB SNAP, PICkit 3/4, and ICD 3/4. Typical applications include sensorless and brushed DC motor control, digital power supplies (LLC, PFC), electronic lighting ballasts, and general-purpose embedded control that benefits from DSP math for filtering. Design consideration: the internal regulator requires a 4.7 uF to 10 uF, 16V low-ESR capacitor on VCAP; this pin must never be tied to VDD, a frequent root cause of non-startup in new layouts. This page consolidates distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP104-E/TL - 16-bit DSC 32KB Flash QFN-44 | Microchip
DSPIC33FJ32GP104-E/TL

DSPIC33FJ32GP104-E/TL - 16-bit DSC 32KB Flash QFN-44 | Microchip

The Microchip Technology DSPIC33FJ32GP104-E/TL is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ32GP104 General Purpose family, delivering 16 MIPS performance with 32KB (11K x 24) of Flash program memory and 2KB of RAM, housed in a 44-pin VTLA QFN package (6x6 mm) with an exposed pad. A Digital Signal Controller combines the deterministic control of a microcontroller (MCU) with the mathematical throughput of a Digital Signal Processor (DSP) in a single core. Within the semiconductor hierarchy, the dsPIC33F sits between general-purpose MCUs and dedicated DSP ICs, offering hardware multiply-accumulate (MAC), divide, and barrel shifter instructions that accelerate control loops and signal-processing routines while retaining MCU-class peripherals, interrupts, and I/O flexibility. Key features of this part include a 16-bit modified Harvard architecture core executing up to 16 MIPS, 32KB self-programmable Flash, automotive AEC-Q100 qualification, and extended temperature operation of -40C to +125C denoted by the -E grade suffix. According to Microchip datasheet 70000652f, the device I/O pins sink or source 10 mA or 6 mA (pin-specific) for standard VOH/VOL, up to 16 mA or 12 mA for non-standard levels, and offer up to 20 selectable open-drain outputs with integrated pull-ups and three external interrupts (two remappable). The dsPIC33F core integrates DSP engine features including a 17-bit x 17-bit multiplier, 40-bit accumulator, and dual operand fetch, enabling single-cycle MAC operations. Clock management via PLL allows the internal clock to run the core while external crystal frequency stays low, reducing EMI. Peripherals on this GP (General Purpose) family include UART, SPI, I2C serial interfaces and an analog-to-digital converter supporting sensor interfacing and communications. Typical applications span motor-adjacent sensing and general control, automotive body and comfort modules (leveraging AEC-Q100 qualification), industrial sensors, power-supply supervisory logic, and embedded systems requiring DSP-class math with MCU-style peripherals at 3.0V to 3.6V operation. For design, remember that 3.3V operation requires 5V-tolerant pin mapping verification in mixed-voltage systems; the datasheet notes 5V-tolerant pins, which simplifies interfacing with legacy 5V logic without level shifters. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

Cotação Contato
DSPIC33FJ32GP104T-E/ML - 16-bit DSC 32KB Flash 44-QFN | Microchip
DSPIC33FJ32GP104T-E/ML

DSPIC33FJ32GP104T-E/ML - 16-bit DSC 32KB Flash 44-QFN | Microchip

The Microchip Technology DSPIC33FJ32GP104T-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33F General Purpose family delivering 16 MIPS performance, 32KB (11K x 24) of FLASH program memory, and a 44-pin QFN (8x8 mm) exposed-pad package with extended -40C to +125C temperature rating. A digital signal controller combines the computational horsepower of a DSP with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes control loops and signal-processing algorithms (filters, transforms, PID) in a single chip, making it the standard choice for digitally controlled power supplies, motor drives, and sensor conditioning. Key features include the dsPIC33F core running at up to 16 MIPS, 2KB (1K x 16) of RAM, three analog comparators, a CTMU (Charge Time Measurement Unit) for capacitive-touch and time measurement, and an RTCC real-time clock/calendar. Connectivity spans I2C, SPI, UART/USART with IrDA and LINbus support. The core is supplied at 3.3V and the device is automotive AEC-Q100 graded in the E-temperature variant. Architecturally, the dsPIC33F uses a modified Harvard pipeline with a 24-bit instruction word, DSP multiply-accumulate instructions, and two 40-bit accumulators. The peripheral remapping capability lets designers route UART, SPI, and interrupt pins to selectable I/O, dramatically easing PCB layout around the dense 44-QFN footprint. Typical applications include digitally controlled power converters, industrial sensors, general-purpose embedded control requiring DSP math, capacitive-touch interfaces using the CTMU, and battery-powered instrumentation that exploits the RTCC. Design consideration: the T-E/ML is a Tape-and-Reel part rated to +125C; verify your thermal budget on the exposed pad, since the QFN relies on the PCB ground plane as the primary heat path. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP202T-I/SS - 16-Bit DSC 40MIPS 32KB | Microchip
DSPIC33FJ32GP202T-I/SS

DSPIC33FJ32GP202T-I/SS - 16-Bit DSC 40MIPS 32KB | Microchip

The Microchip Technology DSPIC33FJ32GP202T-I/SS is a 16-bit digital signal controller (DSC) from the dsPIC33F family that delivers 40 MIPS throughput with 32 KB of Flash program memory and 2 KB of SRAM, housed in a 28-lead SSOP package. It combines a modified RISC CPU core with a DSP engine, offering single-cycle 16x16-bit multiply-accumulate (MAC) operations for real-time control and signal processing. A digital signal controller (DSC) is a hybrid device that merges the deterministic interrupt handling and peripheral integration of a microcontroller (MCU) with the arithmetic throughput of a digital signal processor (DSP). In the system hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes control-loop code and signal-processing math on the same core, eliminating the need for two separate processors in motor control, power conversion, and sensor-fusion designs. The dsPIC33F family is Microchip's mainstream 16-bit DSC line, positioned above the PIC24 MCU family and below the dsPIC33E/dsPIC33C families. Key features of the DSPIC33FJ32GP202T-I/SS include 40 MIPS operation at 3.0 V to 3.6 V, 32 KB Flash with 2 KB SRAM, up to 35 general-purpose I/O pins, a 10-bit ADC, high-speed PWM outputs, and up to four high-speed comparators with direct connection to the PWM module. The device supports In-Circuit Serial Programming (ICSP) and in-circuit debugging through the PGECx/PGEDx pin pairs, enabling field firmware updates without removing the controller from the board. The dsPIC33F core uses a 24-bit instruction word with a 16-bit data path and a barrel shifter, allowing division and normalization in a single cycle. The DSP engine supports fractional and integer arithmetic, saturation logic, and two 40-bit accumulators, which are essential for implementing digital filters, Park/Clarke transforms, and PID loops in motor-control firmware. The 3.3 V CMOS process keeps dynamic power low while maintaining 40 MIPS at the maximum rated clock. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, digital power supplies, solar micro-inverters, automotive sensor conditioning, and industrial instrumentation. The combination of 40 MIPS, hardware PWM, and fast ADC makes the DSPIC33FJ32GP202T-I/SS well suited to closed-loop control where loop latency directly affects stability margins. When designing with this device, keep the ICSP trace between the programming connector and the PGECx/PGEDx pins as short as possible, and decouple every VDD pin with a 0.1 uF ceramic capacitor placed close to the package. The 28-lead SSOP footprint (0.65 mm pitch) requires careful solder-paste stencil design to avoid bridging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

Cotação Contato
DSPIC33FJ32GP204-E/ML - 16-bit 40MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32GP204-E/ML

DSPIC33FJ32GP204-E/ML - 16-bit 40MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP204-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33F General Purpose family, delivering 40 MIPS performance with 32KB (32K x 8) of Flash program memory and 2KB of SRAM, housed in a 44-pin QFN (8x8 mm) package with exposed pad. This AEC-Q100 qualified, extended-temperature (-40C to +125C) device operates from a 3.0V to 3.6V supply. A digital signal controller combines the deterministic control of a microcontroller unit (MCU) with the mathematical throughput of a digital signal processor (DSP) in a single RISC core. In the embedded systems hierarchy, the dsPIC33F sits between basic PIC16/PIC18 8-bit MCUs and full 32-bit DSP or ARM Cortex devices, making it the workhorse for control loops that need both C-language programmability and hardware multiply-accumulate (MAC) capability. Key features include a modified Harvard RISC CPU with DSP instruction extensions (40-bit accumulators, single-cycle MAC), up to four high-speed comparators with direct PWM connection, a 10-bit ADC, five 16-bit timers, and Peripheral Pin Select (PPS) for flexible peripheral-to-pin mapping on its 35 I/O. In-circuit serial programming (ICSP) and IEEE 1149.2-compatible JTAG boundary scan simplify manufacturing and debug. The architecture runs from internal PLL off an external crystal, achieving the full 40 MIPS rating without exotic clock circuitry. Flash program memory with self-programming support enables field firmware updates, and the peripheral set (UART, SPI, I2C, input capture, output compare/PWM) covers most mixed-signal control scenarios. The exposed-pad QFN package provides low-inductance grounding and good thermal performance for power-conversion-adjacent control tasks. Typical applications include automotive body and sensor modules (leveraging AEC-Q100 qualification), industrial automation and motor-control front ends, digital power supplies, and precision analog signal conditioning that pairs the integrated comparators and ADC with the DSP engine. When designing with this device, take advantage of Peripheral Pin Select early in layout to reduce board routing complexity, and provide clean 3.3V decoupling with a solid exposed-pad ground connection for analog accuracy. This page synthesizes distributor pricing data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
DSPIC33FJ32GP204-E/PT - 16-bit DSC, 40MHz, 32KB Flash | Microchip
DSPIC33FJ32GP204-E/PT

DSPIC33FJ32GP204-E/PT - 16-bit DSC, 40MHz, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP204-E/PT is a 16-bit digital signal controller (DSC) combining a dsPIC33 RISC core running at up to 40 MIPS with 32KB of Flash program memory, 2KB of SRAM, and a supply voltage range of 3.0V to 3.6V, housed in a 44-pin TQFP (PT) package in the extended temperature grade (-40C to +125C). A digital signal controller is a hybrid device that merges the deterministic control flow of a microcontroller with the mathematical throughput of a digital signal processor. Within the power-management and embedded-systems hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, offering single-cycle multiply-accumulate (MAC) instructions alongside conventional microcontroller peripherals, making it a natural fit for motor control, digital power conversion, and sensor signal processing. Key features include 40 MIPS performance at 3.3V operation, up to four high-speed comparators with direct output connections, a high-speed PWM module, a multi-channel 10-bit/12-bit ADC architecture, five timers, three external interrupt sources, and IEEE 1149.2-compatible JTAG boundary scan. In-circuit serial programming (ICSP) and in-application programming allow field firmware updates without removing the device from the PCB. Technically, the dsPIC33FJ family uses an enhanced 16-bit architecture with two program and two complex data breakpoints for advanced debugging, supporting hardware trace and run-time watch. The 32KB Flash is organized for efficient DSP loop execution, and the Harvard-style bus structure sustains single-cycle MAC throughput. Typical applications include digital power supplies (power factor correction, LLC converters), brushless DC and PMSM motor control, sensor conditioning with the on-chip comparators, and general embedded control where DSP math accelerates filtering algorithms. A key design consideration is supply decoupling: every VDD/VSS pair requires a 0.1uF ceramic capacitor placed within 2mm of the pin, and the 44-pin TQFP thermal pad routing to a ground pour keeps junction temperature within the -40C to +125C extended rating. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the Microchip datasheet. Pricing data is referenced as of 2026-09-27 from LCSC, DigiKey, and Octopart listings.

Cotação Contato
DSPIC33FJ32GP204-H/ML - 16-bit DSC 40 MIPS 32KB Flash | Microchip
DSPIC33FJ32GP204-H/ML

DSPIC33FJ32GP204-H/ML - 16-bit DSC 40 MIPS 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP204-H/ML is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 32KB (32K x 8) of FLASH program memory, a 3V to 3.6V supply range, and 35 I/O pins, housed in a 44-pin QFN (8x8 mm) surface-mount package. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. In the power-management hierarchy of embedded systems, the dsPIC33F family sits above basic MCUs and below application processors, offering single-cycle MAC and DSP instructions alongside general-purpose control peripherals such as high-speed PWM, ADC, and analog comparators. This hybrid makes DSCs a natural fit for closed-loop control and signal conditioning in a single chip. Key features include the 16-bit dsPIC33F core running at 40 MIPS, IEEE 1149.2-compatible JTAG boundary scan, in-circuit and in-application programming with two program and two complex data breakpoints, and up to four high-speed comparators with direct peripheral connectivity. The -H temperature option supports operation up to +125C, widening the usable thermal envelope versus industrial-grade variants. Architecturally, the dsPIC33FJ32GP204 pairs a modified Harvard 16-bit core with DSP engine support, providing deterministic interrupt latency and hardware multiply-accumulate suitable for filtering, control-law computation, and sensor fusion without external DSP co-processors. Typical applications include digital power supplies, motor control and BLDC drives, sensor signal conditioning, and general industrial control where PWM precision and analog integration matter. Design consideration: the 3.0-3.6V supply tolerance means 5V systems require level translation; plan decoupling and the exposed thermal pad ground connection carefully for QFN assembly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP204-I/ML - 16-bit DSC, 40 MIPS, 32KB Flash | Microchip
DSPIC33FJ32GP204-I/ML

DSPIC33FJ32GP204-I/ML - 16-bit DSC, 40 MIPS, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP204-I/ML is a high-performance 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from its dsPIC33F core, with 32 KB of Flash program memory, 2 KB of SRAM, and industrial temperature operation (-40C to +85C) in a 44-pin QFN (8x8 mm) surface-mount package. A Digital Signal Controller combines the deterministic control of a microcontroller with the math throughput of a DSP engine. In the power-management hierarchy, the DSC sits above a plain MCU: it pairs a PIC24-style 16-bit CPU with DSP multiply-accumulate instructions, making it a natural fit for closed-loop control such as digital power conversion and motor control, where firmware must execute PID loops at kHz rates. Key features include Peripheral Pin Select (PPS), which lets designers remap digital peripherals such as UART, SPI, and input capture to almost any I/O pin, dramatically easing PCB routing. The device integrates a high-speed ADC, up to four high-speed analog comparators with direct connections, and high-speed PWM outputs - the analog-intensive periphery that defines the GP (General Purpose) family. Dual program and complex data breakpoints plus IEEE 1149.2-compatible JTAG boundary scan support in-circuit debugging. Architecturally, the modified Harvard core issues instructions at 40 MHz (40 MIPS nominal), with hardware DSP multiply-accumulate, two address generation units, and zero-overhead looping. The 3.0V to 3.6V supply keeps the core in the modern low-voltage domain, while CMOS process technology balances performance against standby power. Typical applications include digital power supplies, battery chargers, sensor conditioning, and general-purpose embedded control that benefits from DSP filtering. It also suits industrial automation nodes where PPS simplifies board layout. A key design consideration: budget the 2 KB of SRAM carefully - DSP buffers for ADC sampling consume RAM quickly, and data pages in X/Y memory spaces must be planned at link time. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP204T-I/PT - 16-bit 40 MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32GP204T-I/PT

DSPIC33FJ32GP204T-I/PT - 16-bit 40 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP204T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33FJ32GP204 family delivering 40 MIPS performance, 32KB of Flash program memory and 2KB of SRAM, housed in a 44-pin TQFP (10 x 10 mm) surface-mount package. A digital signal controller combines the computational engine of a microcontroller (MCU) with the math acceleration of a digital signal processor (DSP). In the power-management hierarchy, the dsPIC33F family sits alongside general-purpose 16-bit MCUs such as the PIC24F, but adds DSP-class multiply-accumulate instructions and high-speed peripherals, making it a member of the broader embedded-processor category that spans MCU, DSC, and DSP product types. Key differentiating features include the 16-bit dsPIC core running at 40 MIPS (40 MHz clock), up to four high-speed comparators with direct PWM connection, high-speed PWM outputs, an analog-to-digital converter, and 35 general-purpose I/O lines. Communication options cover I2C, SPI, UART/USART, IrDA, and LINbus, enabling straightforward integration into industrial networks. Architecturally, the device uses a modified Harvard pipeline with dedicated DSP multiply-accumulate hardware, Flash program memory organized as 32K x 8 (11K x 24 instruction words), and a supply range of 3.0V to 3.6V. The -I suffix denotes the industrial operating temperature range of -40C to +85C, and the /PT suffix identifies the lead-free 44-pin TQFP tape-and-reel packaging. Typical applications include digital power supplies and power-factor-correction stages exploiting the high-speed PWM and comparators, motor control drives, sensor acquisition and filtering systems, and embedded control in industrial automation where 16-bit math and DSP instructions shorten control-loop execution time. Design consideration: guarantee a clean, decoupled 3.3V rail, since the analog peripherals (ADC, comparators) share AVDD/AVSS domains that are sensitive to switching noise from the PWM outputs. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

Cotação Contato
DSPIC33FJ32GP302-E/SP - 16-bit 40MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32GP302-E/SP

DSPIC33FJ32GP302-E/SP - 16-bit 40MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP302-E/SP is a 16-bit digital signal controller (DSC) delivering 40 MIPS from a modified Harvard architecture CPU, with 32 KB (32K x 8) of Flash program memory and a 3.0 V to 3.6 V supply, housed in a 28-pin SPDIP (SP) extended-temperature package. A digital signal controller is a hybrid device class that combines the deterministic interrupt behavior and control peripherals of a microcontroller with the math acceleration of a DSP core. In the semiconductor hierarchy, the dsPIC33FJ32GP302 sits between general-purpose MCUs (such as the PIC18 family) and full DSPs, making it a voltage-regulator-free, single-chip solution for embedded digital control loops. Key features include the 16-bit modified Harvard CPU with DSP instruction support, up to 40 MIPS operation, high-speed PWM outputs, multiple high-speed analog comparators with direct connection to PWM faults, and an on-chip ADC suited to motor-control and power-conversion feedback. The -E/SP suffix denotes an extended operating temperature range of -40C to +125C, which distinguishes it from the standard -I (industrial, -40C to +85C) variants of the same die. Technically, the CPU module in the dsPIC33FJ32GP302/304 family uses pipelined execution with hardware multiply-accumulate, barrel shifting, and modulo/bit-reversed addressing for efficient FIR and FFT filtering. The peripheral set targets closed-loop control: the motor-control PWM, input capture quadrature encoder interface, and fast comparators form a complete digital power or motor control subsystem on one chip. Typical applications include brushless DC and PMSM motor drives, switch-mode power supplies and digital lighting ballasts, and industrial control nodes where a 3.3 V extended-temperature controller with through-hole mountability simplifies prototyping and low-volume production. Design consideration: the device runs from a nominal 3.3 V rail; do not connect it directly to 5 V logic without level shifting, and pair PGECx/PGEDx pins correctly for ICSP programming. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with prices as of 2026-09-27.

Cotação Contato
DSPIC33FJ32GP302-I/SP - 16-bit 40 MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32GP302-I/SP

DSPIC33FJ32GP302-I/SP - 16-bit 40 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP302-I/SP is a high-performance 16-bit digital signal controller (DSC) delivering up to 40 MIPS at 40 MHz, with 32 KB of Flash program memory, operating from a 3.0 V to 3.6 V supply, housed in a 28-pin SPDIP package. A digital signal controller combines the compute structure of a microcontroller with DSP-grade arithmetic hardware. The dsPIC33F family sits within the broader hierarchy of microcontrollers (MCU -> digital signal controller -> digital signal processor), using a 16-bit modified Harvard architecture with an enhanced instruction set that includes significant DSP support, making it suitable for control loops that need fast, repetitive computation. Key features include the 16-bit dsPIC33 CPU with DSP engine, up to 40 MIPS instruction throughput, Flash program memory of 32 KB, and an on-chip DMA controller. Per the family datasheet, these devices integrate high-speed PWM, a 10-bit ADC, and up to four high-speed comparators with direct connection to the PWM for fast fault response. Technically, the device operates at 3.0 V to 3.6 V with industrial temperature range (-40C to +85C for the -I suffix), and supports In-Circuit Serial Programming (ICSP) and in-circuit debugging via PGECx/PGEDx pin pairs, compatible with Microchip MPLAB tools, SNAP, ICD and the Explorer 16/32 development board with PIM modules. Typical applications include digital power supplies, motor control, sensor signal processing, and general embedded control where DSP math accelerates filtering and control algorithms. When designing, note that all VSS and VDD pins must be connected, and ICSP requires using PGECx/PGEDx pins strictly as matched pairs. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP304-E/ML - 16-bit DSC 40MIPS 32KB Flash | Microchip
DSPIC33FJ32GP304-E/ML

DSPIC33FJ32GP304-E/ML - 16-bit DSC 40MIPS 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP304-E/ML is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance from a 32KB (32K x 8) Flash program memory, housed in a 44-pin QFN (8x8 mm) package with extended temperature rating (-40C to +125C). A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting within the broader hierarchy: DSC -> 16-bit microcontroller -> embedded processor -> semiconductor. The dsPIC33F family is Microchip's mainstream 16-bit DSC platform, executing an enhanced RISC instruction set with DSP engine, hardware multiply-accumulate, and optional DMA. Key features of this device include 40 MIPS core speed at 3.0V to 3.6V supply, 32KB self-programming Flash with ECC-class write endurance, 4KB SRAM, 35 general-purpose I/O, high-speed PWM outputs, up to four high-speed analog comparators, a multi-channel 10/12-bit ADC, and DMA controllers that offload data movement from the CPU. Architecturally, the dsPIC33F core pairs a 16-bit pipeline with a dedicated DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator, barrel shifter), enabling single-cycle MAC operations for filtering, FFT, and control-loop math. Peripheral Trigger Generator and DMA support deterministic real-time behavior needed for closed-loop power conversion and motor control. Typical applications include digital power supplies, sensor signal acquisition, motor control, and general-purpose embedded control where 8-bit MCUs run out of headroom but 32-bit devices are overkill. For design, decouple all VDD/VDDCORE pins with 0.1uF ceramics, connect VCAP to a low-ESR capacitor per Microchip's connection requirements (document 70292), and budget Flash carefully - 32KB is ample for control firmware but tight for protocol stacks. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GP304-I/ML - 16-bit 40MIPS 32KB Flash DSC | Microchip
DSPIC33FJ32GP304-I/ML

DSPIC33FJ32GP304-I/ML - 16-bit 40MIPS 32KB Flash DSC | Microchip

The Microchip Technology DSPIC33FJ32GP304-I/ML is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS from a 3.0V to 3.6V supply, with 32KB (32K x 8) of Flash program memory, 4KB of SRAM, and an 8x8 mm 44-QFN package with exposed pad. A Digital Signal Controller combines the computing core of a 16-bit microcontroller with the math-acceleration hardware of a DSP. In the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP, making it the default choice for closed-loop control of switched-mode power converters, motor drives, and digital signal conditioning where tight real-time deadlines and multiply-accumulate throughput are both required. Key features of the DSPIC33FJ32GP304 include a 16-bit modified Harvard core running 40 MIPs at 40 MHz (12 instruction clock cycles per loop at 3.3V), an 8-channel DMA controller that moves ADC and UART data without CPU intervention, a high-speed 12-bit ADC with up to 500 ksps conversion rate, and three 16-bit timers plus a 32-bit timer option. The General Purpose (GP) family also integrates input capture and output compare modules suited to encoder feedback and PWM generation. Architecturally, the dsPIC33FJ core pairs a 17-bit x 17-bit single-cycle hardware multiplier with 40-bit accumulators and dual operand fetch, executing DSP multiply-accumulate instructions in one cycle. The Flash program memory is self-programmable with an integrated write controller, and the device supports In-Circuit Serial Programming (ICSP) and In-Circuit Emulation (ICE) via the PICkit and ICD tool families. Typical applications include digital power supplies (PFC, LLC, buck/boost control loops), sensorless BLDC and PMSM motor control, solar inverters, battery chargers, and general-purpose embedded control needing analog integration such as portable instrumentation. Design-wise, keep the 3.3V rail within 3.0V to 3.6V, decouple all VDD/VSS pin pairs including the exposed thermal pad (which is the primary VSS connection), and reserve the PGD/PGC programming pins for ICSP access. This page adds value beyond the Microchip datasheet by consolidating distributor pricing tiers, verified drop-in family alternatives, application guidance, and lifecycle information in one place.

Cotação Contato
DSPIC33FJ32GP304T-I/ML - 16-bit 40 MIPS DSC, 32KB Flash | Microchip
DSPIC33FJ32GP304T-I/ML

DSPIC33FJ32GP304T-I/ML - 16-bit 40 MIPS DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP304T-I/ML is a 16-bit dsPIC33F Digital Signal Controller delivering up to 40 MIPS performance with 32KB (32K x 8) of Flash program memory and 35 I/O ports, housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. A Digital Signal Controller (DSC) combines the compute architecture of a microcontroller with the mathematical throughput of a digital signal processor. In the embedded-systems hierarchy, the dsPIC33F family sits between general-purpose MCUs (such as PIC18) and full DSPs, offering single-cycle MAC instructions, hardware divide, and DSP engine while retaining MCU-style peripherals, DMA, and interrupt latency behavior. Key features include a 16-bit modified Harvard RISC core running at 40 MIPS, 32KB self-programmable Flash with ECC-free erase/write support, DMA controllers for peripheral data transfer without CPU intervention, and an integrated analog portfolio - high-speed ADC, comparators, and CTMU-class peripherals typical of the GP (General Purpose) series. The device operates from a 3V to 3.6V single supply, targets the industrial temperature range (-40C to +85C, indicated by the -I suffix), and supports In-Circuit Serial Programming (ICSP) via the standard Microchip programming interface. Development is supported by MPLAB X IDE, the XC16 compiler, and the Explorer 16/32 Development Board, which accepts dsPIC PIM modules for rapid prototyping. Typical applications include motor control and digital power conversion, sensor signal processing and conditioning, industrial automation nodes, and portable instrumentation where DSP math meets real-time control loops. Design consideration: as with all dsPIC33F devices, pay attention to the two-stage Flash program counter prefetch and the need for decoupling on both AVDD and VDD rails; analog performance depends on a clean, separate AVDD supply domain. This page synthesizes distributor pricing data, pin-compatible alternatives, and practical design guidance not found in the manufacturer datasheet, providing a complete engineering decision resource in one place.

Cotação Contato
DSPIC33FJ32GS406-50I/MR - 16-Bit DSC 50MIPS 32KB Flash | Microchip
DSPIC33FJ32GS406-50I/MR

DSPIC33FJ32GS406-50I/MR - 16-Bit DSC 50MIPS 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GS406-50I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33F GS (Switch Mode Power Supply) family, delivering up to 50 MIPS performance with 32 KB (32K x 8) of Flash program memory and 4 KB of RAM, housed in a 64-pin VQFN (9x9 mm) package. Purpose-built for digital power conversion, it integrates high-speed PWM peripherals, a high-speed 10-bit ADC, and analog comparators on a single die. A digital signal controller combines the computational throughput of a DSP with the deterministic peripheral set and interrupt architecture of a microcontroller. Within the power-management IC hierarchy, the dsPIC33F GS family replaces analog control loops with firmware-based closed-loop control, enabling programmable compensation, soft-start, and fault handling in switched-mode power supplies. Key differentiating features include the SMPS-optimized high-speed PWM module with nanosecond-resolution duty-cycle updates, dedicated ADC sampling triggered directly by the PWM for loop synchronization, on-chip analog comparators for cycle-by-cycle current limiting, and a DSP engine with single-cycle MAC and dual operand fetch. The controller also provides QEI (quadrature encoder interface) support, multiple UART/SPI/I2C serial ports, and 5 timers per distributor listings. The modified Harvard 16-bit core executes most instructions in a single cycle, with hardware loop constructs and zero-overhead DO/REPEAT instructions that reduce ISR overhead in high-frequency control loops. Operating speed is set by an internal PLL from an external crystal, supporting the 50 MIPS (approximately 40 MHz class instruction timing noted in some distributor data; 50 MIPS is the headline rating across Mouser, DigiKey and Microchip materials). Typical applications include AC-DC power supplies, interleaved power factor correction (Microchip provides a dedicated interleaved PFC reference design for this family), DC-DC converters, digital lighting ballasts, battery chargers, and embedded motor control where QEI feedback is used. Design consideration: budget the 3.0V to 3.6V supply strictly and place the VDD/VSS decoupling network and AVDD filter close to the die; the high-speed PWM layout demands short gate-drive traces to minimize ringing. This page synthesizes distributor pricing, drop-in alternatives, pinout resources, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
DSPIC33FJ32GS606T-50I/MR - 16-bit 50 MIPS DSC 32KB | Microchip
DSPIC33FJ32GS606T-50I/MR

DSPIC33FJ32GS606T-50I/MR - 16-bit 50 MIPS DSC 32KB | Microchip

The Microchip Technology DSPIC33FJ32GS606T-50I/MR is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 32KB (32K x 8) of Flash program memory and 4KB of RAM, housed in a 64-pin VQFN (9x9 mm) exposed-pad package operating from a 3.3V supply. A digital signal controller combines the computational throughput of a DSP engine with the control peripherals and ease of use of a microcontroller. Within the power-management hierarchy, a DSC such as the dsPIC33F family member sits above a basic MCU: it executes closed-loop control algorithms for switching power supplies, digital lighting, and motor drives at switching frequencies in the hundreds of kilohertz while retaining general-purpose I/O and communication peripherals. Key differentiating features include the dedicated SMPS PWM module with high-resolution PWM outputs, a high-speed 12-bit ADC with simultaneous multi-channel sampling, four analog comparators, two quadrature encoder interfaces (QEI), and on-chip DAC channels. These peripherals eliminate external analog control circuitry in switched-mode power conversion designs. Architecturally, the dsPIC33FJ32GS606 integrates a 16-bit modified Harvard core with DSP multiply-accumulate instructions, operating up to 50 MIPS from an internal PLL. The GS (SMPS) variant of the dsPIC33F family is purpose-built for digital power: its PWM module supports complementary outputs, dead-time insertion, and current-limit trip inputs for cycle-by-cycle current limiting in half-bridge and full-bridge converters. Typical applications include AC-DC and DC-DC digital power supplies, power factor correction (PFC) stages - Microchip provides an interleaved PFC reference design for this controller - digital ballasts, uninterruptible power supplies, and battery chargers. Design consideration: the industrial temperature variant (-40C to +85C, suffix I) requires attention to VQFN exposed-pad thermal grounding; the exposed pad must be soldered to a ground plane for both thermal dissipation and signal integrity of the analog peripherals. This page synthesizes distributor pricing, drop-in family alternatives, and practical design guidance not found in the manufacturer datasheet, with pricing verified against LCSC, DigiKey, and Octopart as of 2026-09-27.

Cotação Contato