Microcontroladores

Produtos (19.000+)

EFM32ZG222F8-QFP48 - 24MHz 8KB Flash MCU | Silicon Labs
EFM32ZG222F8-QFP48

EFM32ZG222F8-QFP48 - 24MHz 8KB Flash MCU | Silicon Labs

The Silicon Labs EFM32ZG222F8-QFP48 is an ARM Cortex-M0+ Zero Gecko microcontroller with a 24 MHz maximum clock, 8 KB Flash memory, 2 KB RAM, and 37 digital I/O pins in a 48-pin TQFP package. It is designed for energy-sensitive embedded systems that require a compact 32-bit controller, low-power operation, and rapid wake-up behavior. A microcontroller is an embedded semiconductor that integrates a CPU core, program memory, data memory, peripherals, and I/O into one device. The EFM32 Zero Gecko family belongs to the 32-bit microcontroller -> embedded processor -> semiconductor hierarchy. Its ARM Cortex-M0+ core provides a compact instruction set and event-driven execution, while the low-energy architecture supports duty-cycled products in which the MCU spends most of its time asleep. The verified device data identifies a 24 MHz operating speed, 8 KB Flash organized as 8K x 8, 2 KB RAM, and two 16-bit timers. The manufacturer describes fast wake-up times and energy-saving modes as core platform features. A 1.98 V to 3.8 V supply range appears in the alternatives cross-reference data, and the package is a 48-pin TQFP measuring 7 x 7 mm. The 37 digital I/O pins provide connections for sensors, actuators, communications, and user controls. This MCU is suitable for compact industrial sensing, connected sensor nodes, building controls, portable instruments, and low-power embedded products. Its small memory footprint favors focused control tasks rather than complex graphical interfaces or large application workloads. The 48-pin TQFP also exposes more I/O than the smallest packages while remaining compatible with conventional leaded assembly processes. Designers should verify the exact peripheral pin assignments, programming interface, and operating-mode limits against the manufacturer datasheet before layout release. Decoupling, ground-return planning, and separation between analog and digital circuitry remain important when the MCU drives sensors or communication modules. This page combines verified manufacturer and distributor information with practical selection guidance, application context, and compatibility-focused alternative research. It is designed to help engineers evaluate the EFM32ZG222F8-QFP48 faster while retaining traceability to the supplied product data.

Cotação Contato
EFM8BB21F16G-C-QFN20R - 50MHz 16KB 8-Bit MCU | Silicon Labs
EFM8BB21F16G-C-QFN20R

EFM8BB21F16G-C-QFN20R - 50MHz 16KB 8-Bit MCU | Silicon Labs

Silicon Labs EFM8BB21F16G-C-QFN20R is an 8-bit EFM8 Busy Bee microcontroller with a 50 MHz CIP-51 core, 16 KB of Flash memory, and a 20-QFN 3x3 mm package. The verified distributor listing identifies 16 digital I/O and 2.5 V/3.3 V operation, while the related Mouser result confirms 2.25 KB RAM. Its compact package and integrated analog peripherals suit space-constrained embedded systems. An 8-bit microcontroller is a programmable semiconductor containing a CPU core, memory, digital I/O, timers, and peripherals on one integrated circuit. The EFM8 Busy Bee family combines an 8051-compatible architecture with enhanced peripherals, allowing compact embedded controllers to execute control logic, sample analog signals, and manage communications without requiring separate components. This MCU therefore sits between a basic microcontroller and a more complex mixed-signal embedded controller. The verified data highlights a 50 MHz operating speed, 16 KB Flash, 2.25 KB RAM, 16 digital I/O lines, and a 3x3 mm QFN-20 package. Related Silicon Labs family information lists a 12-bit ADC, analog comparators, programmable counter array channels, and additional communication peripherals. These integrated resources reduce board area and simplify designs requiring sensor acquisition, timing, or low-speed communication. The C-QFN20R ordering suffix identifies a packaged 20-QFN tape-and-reel configuration; the provided data does not independently establish every electrical limit for this exact suffix. The family datasheet should be used for package dimensions, pin functions, electrical characteristics, clocking, memory behavior, and programming details. Because the MCU integrates both digital and analog functions, careful grounding and short analog traces remain important. Typical uses include compact sensor controllers, consumer-electronics accessories, motor-control or timing subsystems, medical-device control boards, and industrial automation modules. The 20-QFN package reduces footprint compared with larger leaded packages, but exposed-pad thermal management and assembly process controls must be considered. The 50 MHz core provides useful headroom when coordinating peripheral activity and control tasks. For PCB design, use the manufacturer datasheet and reference-manual pin definitions rather than assuming package-side numbering. Place decoupling capacitors close to supply pins, provide a clean analog reference and ground arrangement, and verify exposed-pad copper against the package drawing. Confirm programming, clock, reset, and boot requirements before committing the layout. This page combines verified distributor and manufacturer information with application guidance, datasheet links, and a cautious replacement analysis. Because exact electrical and lifecycle fields were not supplied in the source data, they are marked as needed instead of being inferred. That approach keeps purchasing and design decisions traceable to verifiable EFM8BB2 documentation.

Cotação Contato
EFM8BB21F16I-C-QSOP24 - 50MHz 8051 MCU, 16KB Flash, QSOP-24 | Silicon Labs
EFM8BB21F16I-C-QSOP24

EFM8BB21F16I-C-QSOP24 - 50MHz 8051 MCU, 16KB Flash, QSOP-24 | Silicon Labs

The Silicon Labs EFM8BB21F16I-C-QSOP24 is an 8-bit CIP-51 8051-core microcontroller from the Busy Bee 2 (EFM8BB2) family, operating at up to 50 MHz with 16 KB of Flash and 2.25 KB of RAM in a 24-pin QSOP package. It integrates a 12-bit ADC, enhanced PWM, and precision analog peripherals in a compact surface-mount footprint designed for space-constrained embedded designs. The industrial-grade device operates from a 2.2 V to 3.6 V supply across -40 to +125 C. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and a set of programmable I/O and peripheral interfaces. The 8051 architecture, introduced by Intel in 1980 and still widely used today, is a CISC 8-bit core with an instruction set optimised for bit-level control and small-form-factor embedded code. Silicon Labs' EFM8 Busy Bee line modernises this core with a single-cycle CIP-51 implementation, integrated high-precision analog, and a low-power platform aimed at industrial, consumer, and embedded-control applications. Key features include a 50 MHz single-cycle 8051 core delivering ~50 MIPS, 16 KB in-system programmable flash, 2.25 KB RAM, a 12-bit 200 ksps ADC, multiple timers (5 x 16-bit), a 3-channel PCA for PWM/capture, I2C/SPI/UART communication peripherals, and on-chip temperature sensor. The 24-pin QSOP package supports up to 21 digital I/O pins in a small 8.7 mm x 3.9 mm footprint suitable for high-density PCB designs. Typical applications include industrial sensor interfaces, LED lighting controllers, motor-control signal conditioning, capacitive-touch front panels, and consumer peripherals. The wide -40 to +125 C operating range and AEC-Q100 readiness on related family members also suit the device for automotive body and HVAC subsystems when used with automotive-graded siblings. When designing with the EFM8BB21F16I-C-QSOP24, ensure the supply rail is decoupled with at least a 1 uF bulk and 100 nF ceramic capacitor pair placed close to the VDD pin. The device has no internal regulator; the supply must remain within 2.2 V-3.6 V at all times including transients. Use Simplicity Studio for configuration, flashing, and energy profiling during development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
EFM8BB51F16G-C-QFN20R - 50MHz 16KB 8051 MCU | Silicon Labs
EFM8BB51F16G-C-QFN20R

EFM8BB51F16G-C-QFN20R - 50MHz 16KB 8051 MCU | Silicon Labs

Silicon Labs EFM8BB51F16G-C-QFN20R is an 8-bit CIP-51 8051 Busy Bee microcontroller operating at 50 MHz, with 16 kB Flash, 1.28 kB RAM, and 16 GPIO in a 20-QFN 3 x 3 mm package. It is designed for compact embedded control applications requiring efficient 8051 processing, integrated flash memory, and a broad set of peripherals. An 8-bit microcontroller such as the EFM8BB51F16G-C-QFN20R is a programmable semiconductor that executes firmware, reads inputs, controls outputs, and manages communication or timing functions within a larger embedded system. The EFM8 Busy Bee family belongs to the broader 8-bit MCU and embedded-processing hierarchy, making it suitable for control-centric products where cost, compactness, and deterministic peripheral integration matter more than high-end processing performance. The device provides 4 x 16-bit timers and 3 PCA channels according to the manufacturer product information. Its 50 MHz operating frequency supports efficient execution of typical control logic, while 16 kB Flash stores firmware and 1.28 kB RAM supports working data. The 16 GPIO provide connections for sensors, switches, actuators, indicators, and other embedded-system signals within the 3 x 3 mm QFN-20 footprint. The EFM8BB51 family uses the wide-supply 5 V Busy Bee platform and is specified for operation from -40 °C to 85 °C. The supplied manufacturer page identifies additional communication peripherals, although the exact peripheral inventory is not enumerated in the verified web data. Applications include compact sensor controllers, industrial monitoring modules, building-control interfaces, communication equipment, and low-cost consumer devices. The principal design consideration is package and firmware compatibility. EFM8BB51F16G-C-QFN20R must be placed on a PCB footprint matching the 20-QFN 3 x 3 mm package, with careful attention to exposed-pad layout, power routing, decoupling, and signal integrity. The manufacturer EFM8BB51 datasheet should be used as the authoritative source for pin assignments, electrical limits, startup behavior, and programming details. This product page consolidates verified distributor specifications, manufacturer documentation, package information, sourcing context, and practical design guidance. Availability and pricing should be checked against current distributor records, while lifecycle and exact alternate-device suitability should be confirmed before production release.

Cotação Contato
EFM8LB11F32ES1-C-QFN24R - 8-bit 72MHz Laser Bee MCU, 32KB Flash | Silicon Labs
EFM8LB11F32ES1-C-QFN24R

EFM8LB11F32ES1-C-QFN24R - 8-bit 72MHz Laser Bee MCU, 32KB Flash | Silicon Labs

The Silicon Labs EFM8LB11F32ES1-C-QFN24R is a CIP-51 8051-core "Laser Bee" 8-bit microcontroller running at 72 MHz with 32 KB flash and 2.25 KB RAM in a 24-pin QFN (3x3 mm) package. It is supplied on a 3.3 V typical rail (2.2 V to 3.6 V) and integrates a 14-bit ADC, two 12-bit DACs, a 4-channel PWM, and the standard EFM8 peripheral set including I2C, SPI, and UART. Laser Bee is Silicon Labs' high-throughput 8-bit MCU family that retains the classic 8051 instruction set while pushing the core to a 72 MHz pipeline, achieving roughly 50 MIPS effective throughput. In the broader taxonomy, EFM8LB1 sits under 8-bit microcontrollers, which are themselves a sub-category of microcontrollers (MCU), embedded controllers, and finally integrated circuits (IC). Compared with older 8051 parts (typically 12 MHz, 1 MIPS/MHz), the Laser Bee core delivers 7-8x higher compute density, making it suitable where determinism of the 8051 is preferred but throughput of an ARM Cortex-M0+ is not required. The device integrates 32 KB single-cycle flash, 2.25 KB RAM, 13 digital I/O (20 per the supplier listing) plus analog, an internal 49 MHz ±2% HFO, and a hardware cryptographic accelerator is not included at this family tier. Peripherals visible from the part number suffix ("S1") include UART, SMBus/I2C, SPI, PCA, timers, and a 14-bit 12-channel SAR ADC. The "C" in the suffix indicates revision C silicon, which improves ADC linearity and lowers active current compared with revision A/B parts. Architecturally, the Laser Bee core is a single-cycle 8051 with branch prediction and a tightly-coupled flash controller; this avoids the multi-cycle fetch penalty of legacy 8051s. The internal 49 MHz HFO can drive the core directly or be divided, and a low-frequency 32 kHz oscillator backs RTC-mode sleep. The 14-bit ADC at 900 ksps and two 12-bit DACs provide direct analog I/O for sensor conditioning loops without external converters. Typical applications include BLDC motor control (FOC sensorless), USB-C power delivery (PD) negotiation, portable medical sensor read-out, and lighting-control modules requiring up to 20 PWM channels. This part also fits general-purpose 8051 socket upgrades in industrial HMI and HVAC controllers where the existing firmware stack must be preserved. When designing with this part, route the QFN-24 exposed pad (pin 25 / DAP) directly to a contiguous ground pour - this is the primary thermal and electrical return path. Keep ADC traces short and symmetric, and use a separate analog supply decoupling node if mixed-signal accuracy matters. This page synthesizes distributor pricing, drop-in same-package alternatives, and design considerations not found in the manufacturer datasheet.

Cotação Contato
EFM8LB12F64E-C-QFN24 - 72MHz 8051 MCU 64KB Flash QFN-24 | Silicon Labs
EFM8LB12F64E-C-QFN24

EFM8LB12F64E-C-QFN24 - 72MHz 8051 MCU 64KB Flash QFN-24 | Silicon Labs

The Silicon Labs EFM8LB12F64E-C-QFN24 is a CIP-51 8051-core 8-bit microcontroller from the Laser Bee EFM8LB1 family, delivering 72 MHz CPU performance with 64 KB Flash, 4.25 KB RAM, and a high-integration analog peripheral set, housed in a 24-pin QFN (3x3 mm) package. It integrates a 14-bit 12-channel ADC capable of up to 900 ksps, four 12-bit DACs, two low-current comparators, and four configurable logic units, providing an analog-rich MCU for optical modules and precision sensing. An 8-bit microcontroller (MCU) such as this EFM8LB1 device is a single-chip computer that combines an 8051-compatible CPU core, Flash program memory, RAM, and a rich set of analog and digital peripherals. Within the broader semiconductor taxonomy, an MCU falls under microcontrollers, which in turn sit inside the integrated-circuits hierarchy as one of the most widely deployed device families for embedded control. The 8051 architecture, originally introduced by Intel in 1980, remains one of the longest-lived CPU instruction sets in the industry. Key features include 6 x 16-bit timers, multiple communication interfaces (UART, SPI, I2C, and integrated CAN), an on-chip VDD monitor, a watchdog timer, a ±2% internal oscillator, and an internal calibrated temperature sensor with ±3 °C accuracy. The pipelined CIP-51 core executes most instructions in one to two system clocks, effectively doubling throughput versus a standard 8051 running at the same frequency. Typical applications include optical modules, LED lighting controllers, sensor signal conditioning, industrial control nodes, and consumer devices that require both analog precision and 8-bit MCU economics. The wide 2.2V to 3.6V supply range and small 3x3 mm footprint suit space-constrained PCB designs. When designing with this part, ensure decoupling capacitors are placed close to VDD pins, and that ADC inputs are referenced properly to minimize conversion noise. Developers can use Silicon Labs' Simplicity Studio with the built-in configuration wizards to accelerate firmware bring-up.

Cotação Contato
EFM8LB12F64E-C-QFP32 - 72MHz 8051 MCU 64KB Flash | Silicon Labs
EFM8LB12F64E-C-QFP32

EFM8LB12F64E-C-QFP32 - 72MHz 8051 MCU 64KB Flash | Silicon Labs

The Silicon Labs EFM8LB12F64E-C-QFP32 is a high-performance 8-bit 8051 (CIP-51) microcontroller from the Laser Bee family, delivering 72 MHz core performance with 64 KB Flash and 4.25 KB RAM in a 32-pin QFP (7x7 mm) package. It integrates a 14-bit, 20-channel ADC capable of up to 900 ksps, four 12-bit DACs, two low-current analog comparators with adjustable reference, and four configurable logic units, all in a compact surface-mount form factor. An 8051 microcontroller is a Harvard-architecture 8-bit MCU originally introduced by Intel in 1980 and now widely produced as a licensed core. The CIP-51 variant from Silicon Labs is a pipelined enhancement of the original 8051 instruction set, achieving single-clock-per-instruction execution that delivers roughly 8-12x the performance of the standard 8051 at the same clock rate. Within the broader taxonomy, the EFM8LB1 sits as: microcontroller (MCU) -> embedded controller -> 8-bit MCU -> 8051-family MCU -> CIP-51 core MCU -> Laser Bee performance line. Key features include a wide 2.2V to 3.6V supply range, six 16-bit timers, multiple communication peripherals (I2C/SPI/UART), an integrated CAN controller, on-chip VDD monitor, hardware watchdog timer, and a ±2% internal oscillator that eliminates the need for an external crystal in many designs. The device is well suited to cost-sensitive optical module, sensor hub, and motor-control applications. Typical applications include optical modules and transceivers, IoT sensor nodes, industrial control interfaces, LED lighting controllers, low-end motor control, and consumer appliances. Designers choose this part for its high analog integration and small footprint. When designing with the EFM8LB12F64E-C-QFP32, ensure decoupling capacitors are placed close to VDD pins and that unused debug pins (such as C2CK/C2D) are handled per the reference manual to prevent leakage. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate supply-chain resilience.

Cotação Contato
EFM8UB20F64G-A-QFP48 - 8-bit USB MCU, 64kB Flash | Silicon Labs
EFM8UB20F64G-A-QFP48

EFM8UB20F64G-A-QFP48 - 8-bit USB MCU, 64kB Flash | Silicon Labs

The Silicon Labs EFM8UB20F64G-A-QFP48 is a high-speed 8-bit CIP-51 (8051-compatible) microcontroller from the EFM8 Universal Bee family, integrating a full-speed USB peripheral with an on-chip transceiver and clock recovery. It operates at 48 MHz, contains 64 kB of Flash, 4.25 kB of RAM, and is housed in a 48-pin TQFP (7x7 mm) package for surface-mount assembly. An 8-bit microcontroller (MCU) is a microprocessor integrated on a single IC with program memory (Flash), data memory (RAM), and peripheral interfaces. The 8051 architecture, originally introduced by Intel in 1980, remains widely used in cost-sensitive embedded applications. The CIP-51 core used by Silicon Labs is a pipelined 8051 implementation that executes most instructions in 1-2 system clocks, delivering roughly 10x the throughput of a standard 8051 at the same clock. The EFM8UB20F64G-A-QFP48 belongs to the universal-bee sub-family, which adds USB 2.0 full-speed support and analog peripherals aimed at USB human-interface and communication devices. Key features include 40 digital I/O pins, 6 x 16-bit timers, 5 programmable counter array (PCA) channels, a 10-bit differential ADC with EMIF, two low-current analog comparators, and integrated USB with on-chip transceiver. The wide operating voltage range of 2.4 V to 3.6 V suits battery-powered and USB bus-powered designs, while internal oscillators reduce external component count. Architecturally, the device combines an 8-bit ALU with a 2-stage pipeline, 256 bytes of internal data RAM, and 4 kB of XRAM accessible via MOVX. The USB block includes a Serial Interface Engine (SIE), dedicated 1.024 kB USB FIFO buffer, and integrated 3.3 V regulator for USB signaling, enabling bus-powered operation without external USB components. Typical applications include USB human-interface devices (HID), USB-to-UART bridges, gaming peripherals, USB sensors, low-cost instrumentation, and embedded consumer products that require a small footprint with on-board USB. The 48-TQFP package exposes enough I/O for matrix keypads, displays, and multiple serial peripherals. When designing with this part, ensure the USB D+/D- traces are 90 ohm differential and routed as short as possible. Decouple VDD with 100 nF plus 4.7 uF bulk capacitors placed close to the pins, and follow Silicon Labs reference design guidelines for EMI/ESD on the USB connector. This page synthesizes distributor pricing, drop-in alternatives from the EFM8UB2 family, and practical design notes not consolidated in any single manufacturer document.

Cotação Contato
EFM8UB20F64G-B-QFN32 - 48MHz USB 8051 MCU, 64KB Flash | Silicon Labs
EFM8UB20F64G-B-QFN32

EFM8UB20F64G-B-QFN32 - 48MHz USB 8051 MCU, 64KB Flash | Silicon Labs

The Silicon Labs EFM8UB20F64G-B-QFN32 is a USB-capable 8-bit CIP-51 (8051-compatible) microcontroller from the EFM8 Universal Bee family, operating at 48 MHz with 64 kB on-chip Flash and 4 kB RAM, housed in a 32-pin QFN (5x5 mm) package. It integrates a USB 2.0 full-speed device controller, 25 digital I/O pins, six 16-bit timers, and a five-channel Programmable Counter Array (PCA) for PWM and timing functions, plus a 10-bit differential ADC with 20 input channels. The 'B' temperature grade variant supports an operating range of -40C to +105C, making it suitable for industrial and consumer USB HID, CDC, and composite device designs. An 8-bit microcontroller (MCU) is an integrated circuit containing a CPU, program memory (Flash), data memory (RAM), and programmable I/O peripherals on a single die. The 8051 architecture, originally introduced by Intel in 1980, remains one of the most widely deployed MCU cores due to its compact code density, deterministic interrupt response, and low cost. The CIP-51 core implemented in EFM8UB2 devices executes most instructions in 1-2 system clocks at 48 MHz, giving 8051-class peripherals performance comparable to many 16-bit cores while preserving the 8051 instruction set for code reuse. Key features of the EFM8UB20F64G-B-QFN32 include an integrated USB 2.0 full-speed (12 Mbps) PHY and transceiver that eliminates the need for external USB components, a 10-bit 200 ksps SAR ADC with 20 channels and true differential inputs for sensor measurements, and two on-chip low-current analog comparators with adjustable reference. The device supports I2C, SPI, and UART serial interfaces, an external memory interface (EMIF), and a four-channel DMA controller that offloads data movement between peripherals and RAM. The EFM8UB2 architecture uses a pipelined CIP-51 core with a peak throughput of 48 MIPS at 48 MHz, and the device offers multiple low-power modes - including a 0.1 uA typical stop-mode current with full RAM retention - that make it well-suited to USB bus-powered and battery-powered applications. The integrated USB peripheral includes an on-chip 3.3V LDO regulator and 1.5 kOhm pull-up resistors, simplifying USB bus-powered designs to a minimum external BOM. Typical applications include USB HID input devices such as keyboards, mice, and game controllers, USB-to-UART bridge dongles, USB CDC virtual COM ports, USB composite devices combining HID + CDC, USB charging-port controllers, and industrial sensor interfaces with USB diagnostics. The wide temperature grade and integrated USB also fit point-of-sale (POS) terminals, barcode scanners, and laboratory instrumentation front panels. When designing with the EFM8UB20F64G-B-QFN32, ensure that VBUS sensing is correctly wired to the VBUS pin and that the D+ and D- lines use 90 ohm differential routing per USB 2.0 signal-integrity guidelines. Use the on-chip LDO output (VDD) to power external pull-up resistors rather than routing 5 V VBUS directly to logic-level pins. The internal 5 V tolerant I/O allows direct interfacing with USB VBUS signals without external level shifters. This page synthesizes current distributor stock and pricing, same-family drop-in variants, and practical design guidance for the USB-capable EFM8UB2 family - information not consolidated in any single manufacturer datasheet.

Cotação Contato
EFM8UB20F64G-B-QFN32R - 48MHz 8051 USB MCU, 64kB Flash | Silicon Labs
EFM8UB20F64G-B-QFN32R

EFM8UB20F64G-B-QFN32R - 48MHz 8051 USB MCU, 64kB Flash | Silicon Labs

The Silicon Labs EFM8UB20F64G-B-QFN32R is a high-performance 8-bit Universal Bee microcontroller built on the pipelined CIP-51 8051 core, operating at 48 MHz with 64 kB Flash and 4 kB RAM in a 32-pin QFN (5x5 mm) package. It integrates a full-speed USB 2.0 controller, 25 digital I/O pins, six 16-bit timers, five PCA channels, and a 10-bit differential ADC with multiple channels. The -B temperature grade targets -40C to +85C operation, while the -R suffix denotes Tape and Reel packaging for high-volume assembly. A Universal Bee 8-bit MCU is a small-form-factor microcontroller that combines a legacy-compatible 8051 instruction set with modern peripherals such as USB, I2C/SMBus, SPI, and UART. It belongs to the broader category of embedded microcontrollers, which sit below microprocessors and microprocessors with caches in the system hierarchy: microcontroller -> embedded controller -> IC. Universal Bee parts specifically target cost-sensitive USB-enabled applications where 8-bit density, deterministic interrupt response, and USB 2.0 full-speed (12 Mbps) connectivity outweigh the throughput of 32-bit Cortex-M0/M0+ alternatives. Key features of the EFM8UB20F64G-B-QFN32R include the USB 2.0 full-speed device controller with on-chip transceiver, a 10-bit 200 ksps differential SAR ADC, two on-chip low-current analog comparators with adjustable reference, brown-out reset and supply supervisor, and a hardware cipher engine for AES-128. The 32-QFN package measures 5x5 mm with an exposed pad for low thermal impedance. The device supports 2.7 V to 5.25 V supply, making it directly compatible with battery and USB bus-powered designs. Typical applications for this part are USB HID peripherals (keyboards, mice, game controllers), USB-to-UART bridges, USB CDC virtual COM ports, industrial sensor interfaces, and low-cost consumer appliances needing USB connectivity. The combination of 64 kB code space and USB in a compact 32-QFN makes it especially attractive for space-constrained dongles and wearables. When designing with this MCU, reserve the exposed pad (EP) for a continuous ground plane and connect it to GND through at least four thermal vias. Add a 1 uF and a 100 nF decoupling pair as close as possible to the VDD pin. The USB D+/D- traces must be 90 ohm differential, length-matched within 150 mil, and routed over a continuous ground reference for impedance control. This page synthesizes distributor pricing, drop-in alternatives from the same EFM8UB2 family, and practical design notes that go beyond what is in the manufacturer datasheet alone.

Cotação Contato
ES32H747XIH6U - Dual-Core ARM Cortex-M7/M4 MCU 480MHz | STMicroelectronics
ES32H747XIH6U

ES32H747XIH6U - Dual-Core ARM Cortex-M7/M4 MCU 480MHz | STMicroelectronics

The STMicroelectronics ES32H747XIH6U is a high-performance dual-core 32-bit microcontroller pairing an ARM Cortex-M7 core running up to 480 MHz with an ARM Cortex-M4 core running up to 240 MHz, integrating 2 MB of Flash and approximately 1 MB of SRAM in a 240+25-pin TFBGA (14x14 mm) package. The two cores communicate via a hardware semaphore and a shared SRAM region, allowing designers to partition real-time control on the M4 from graphics, DSP, or user-interface workloads on the M7. An MCU (microcontroller unit) is a single-chip computer that combines a CPU core, non-volatile program memory, working RAM, and a rich set of on-chip peripherals. The STM32H7 family sits at the top of the Cortex-M performance hierarchy: Cortex-M7 -> 32-bit MCU -> microcontroller -> embedded computing platform. Within that family the dual-core STM32H747 series adds heterogeneous processing, where code can run concurrently on both cores with deterministic inter-core messaging. Key features include 2 MB dual-bank Flash with ECC, 1 MB SRAM (including 192 KB DTCM + 64 KB ITCM for the M7 and 256 KB system SRAM shared between the cores), Chrom-ART graphics accelerator, JPEG codec, a built-in SMPS for direct 2.7 V–3.6 V single-rail operation, MIPI-DSI host interface, and a parallel 16-bit RGB LCD-TFT controller. Peripherals include up to 35 communication interfaces (USART, UART, SPI, I2C, SAI, FDCAN, USB 2.0 FS+HS, SDMMC), three 12-bit ADCs (3.6 MSPS), two 12-bit DACs, and crypto/hash accelerators. Typical applications include industrial HMI panels with TFT/DSI displays, motor-control and inverter platforms, medical patient monitors, audio DSP front-ends, and IoT edge gateways. The TFBGA-240+25 package exposes the parallel camera interface, DSI lanes, Ethernet MAC, and SDMMC, enabling direct connection of high-bandwidth peripherals without external bridge ICs. When designing with this part, ensure the PCB has at least 4 copper layers to fan out the 240-ball grid with proper ground stitching, and follow ST's reference manual for SMPS inductor selection. Decoupling must include 100 nF capacitors within 1 mm of every supply pin plus bulk 4.7 µF on each supply rail.

Cotação Contato
ESP32-P4NRW16X - Dual-Core RISC-V MCU, 16MB PSRAM | Espressif
ESP32-P4NRW16X

ESP32-P4NRW16X - Dual-Core RISC-V MCU, 16MB PSRAM | Espressif

The Espressif Systems ESP32-P4NRW16X is a 32-bit high-performance microcontroller (MCU) SoC with a RISC-V dual-core high-performance (HP) microprocessor at up to 400 MHz-class performance, a single-core low-power (LP) microprocessor, and 16 MB of in-package PSRAM (OPI/HPI) in a 10 x 10 mm QFN-104 package. A microcontroller SoC integrates a processor core, memory, and peripherals on a single chip, sitting at the top of the embedded hierarchy: MCU -> system-on-chip (SoC) -> embedded system. The ESP32-P4 family extends the ESP32 product line by removing on-chip Wi-Fi/Bluetooth radio and instead focusing on compute, memory, and display/vision peripherals, pairing naturally with Espressif companion connectivity chips such as the ESP32-C6. Key features include the HP/LP dual-system architecture, where the LP single-core RISC-V processor keeps monitoring and wake-up tasks running while the HP cores sleep; 16 MB of in-package OPI/HPI PSRAM with a 1.8 V VDD_PSRAM rail; dedicated MIPI CSI and MIPI DSI interfaces for camera input and display output; and an industrial ambient temperature range of -40 to +85 C. Technically, the ESP32-P4 is built for rich HMI, edge computing, image processing, and voice processing. The HP system contains the dual-core RISC-V microprocessor with access to large internal memory, while hardware accelerated image and voice paths offload the CPU. Espressif recommends the v3.0-or-later reference schematic and at least a 4-layer PCB for new designs, and the series is currently supplied at chip revision v3.x. Typical applications include smart display HMI panels with MIPI DSI screens, camera/vision nodes using MIPI CSI image sensors, and voice-assistant endpoints with on-device audio processing. Paired with an ESP32-C6 for Wi-Fi 6 and 802.15.4, the P4 forms the compute engine of a modern connected HMI. Design consideration: because the in-package PSRAM operates at 1.8 V (VDD_PSRAM_0/1), power-rail sequencing and the recommended 4-layer stackup with solid ground planes are critical for signal integrity on the OPI PSRAM and MIPI buses. This page synthesizes distributor pricing, drop-in alternatives within the ESP32-P4 family, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
ESP32-P4NRW32X - Dual-Core RISC-V HMI MCU 32MB PSRAM | Espressif
ESP32-P4NRW32X

ESP32-P4NRW32X - Dual-Core RISC-V HMI MCU 32MB PSRAM | Espressif

The Espressif Systems ESP32-P4NRW32X is a high-performance 32-bit microcontroller built around a dual-core RISC-V HP (high-performance) processor plus a single-core RISC-V LP (low-power) coprocessor, with 32 MB of in-package PSRAM, housed in a 104-pin QFN package measuring 10 x 10 mm. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of the embedded systems hierarchy: SoC -> microcontroller -> embedded system. The ESP32-P4 is Espressif's flagship application-class MCU, positioned above the ESP32-S3 for compute-intensive embedded workloads. Key features include the HP/LP dual-system architecture that lets the LP core handle sleep-state housekeeping while the HP cores run demanding workloads, 32 MB of in-package PSRAM (the NRW32 variant) supporting large frame buffers, powerful image and voice processing capability, and rich HMI-oriented peripherals. Unlike most ESP32 family members, the ESP32-P4 focuses purely on compute; wireless connectivity is added externally via companion chips such as the ESP32-C6. Technically, the HP system contains the dual-core RISC-V processor with AI instruction extensions, an advanced memory subsystem, and integrated high-speed peripherals, while the LP system contains the single-core RISC-V low-power microprocessor. This split allows always-on voice wake-word detection or sensor polling at minimal power, waking the HP cores only when needed. Typical applications include rich Human-Machine Interfaces (HMI) with touch displays, edge computing nodes, image and camera processing pipelines, and voice processing endpoints. The large in-package PSRAM directly supports display frame buffers and AI model working sets without external memory routing. Design consideration: Espressif recommends the v3-or-later reference schematic for new designs and at least a 4-layer PCB for the 10 x 10 mm QFN-104 footprint; strapping pins must be reviewed against the ESP32-P4 datasheet before layout is frozen. This page synthesizes distributor pricing, drop-in alternatives, package guidance, and design notes not found in the manufacturer datasheet.

Cotação Contato
EZ80F91AZ050EG - 8-bit 50MHz eZ80 Acclaim MCU 256KB | Zilog
EZ80F91AZ050EG

EZ80F91AZ050EG - 8-bit 50MHz eZ80 Acclaim MCU 256KB | Zilog

The Zilog EZ80F91AZ050EG is an 8-bit microcontroller from the eZ80 Acclaim! flash family, operating at 50 MHz with 256 KB of on-chip flash program memory and 16 KB SRAM in a 144-pin LQFP package (20x20 mm). It supports Z80-compatible 64 KB addressing or full 24-bit 16 MB linear addressing for embedded networking and industrial control. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (SRAM), and peripherals on one die. The eZ80 is a CISC (Complex Instruction Set Computer) core — a Z80-compatible architecture that retains legacy object code while extending to 24-bit linear addressing, placing it in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include an integrated 10/100 Mbps Ethernet MAC (EMAC) with MII/RMII interface, a glueless external memory controller supporting SRAM/Flash/NAND/NOR, four 16-bit timers, a JTAG debug port, and 32 general-purpose I/O pins. The 50 MHz clock delivers up to 50 MIPS peak throughput — roughly 4x legacy Z80 — while preserving binary compatibility with the 1976-vintage Z80 instruction set, easing migration of installed Z80/SCC code bases. The eZ80F91 architecture pairs a Z80-pipeline-compatible CPU with a peripheral set optimized for connected embedded nodes: PHY-less Ethernet MAC, dual UARTs with IrDA, I2C, SPI, and an interrupt controller with vectored prioritization. On-chip voltage regulation supports a 3.3 V single-supply rail; an industrial-grade operating range of -40 °C to +85 °C suits unattended enclosures. Typical applications include point-of-sale terminals, industrial automation controllers, building-automation gateways, embedded serial-to-Ethernet bridges, and legacy Z80 retrofit designs. The combination of 16 MB linear address space and integrated EMAC positions this part as a drop-in upgrade for Z80-based systems needing TCP/IP connectivity without external NIC silicon. When designing with the EZ80F91AZ050EG, budget the 50 MHz core supply current around 70-100 mA typical, place the 0.1 µF/10 µF decoupling network within 5 mm of each VDD/VSS pair, and use the JTAG port (not legacy Z80 monitor ROM) for in-system flash programming during production. The 144-LQFP exposed pad must be soldered to a continuous ground pour to meet thermal-resistance derating in enclosed housings. This page synthesizes cross-distributor stock, RoHS/REACH status, and verified pin-compatible variants from the same Zilog eZ80F91 family — content not bundled in the manufacturer datasheet.

Cotação Contato
EZ80F91AZ050SG - 50MHz 256KB Flash eZ80 MCU | Zilog | 144-LQFP
EZ80F91AZ050SG

EZ80F91AZ050SG - 50MHz 256KB Flash eZ80 MCU | Zilog | 144-LQFP

The Zilog EZ80F91AZ050SG is an 8-bit eZ80 Acclaim! flash microcontroller running at 50 MHz with 256 KB of on-chip flash and 16 KB SRAM, housed in a 144-pin LQFP (20x20 mm) package. It supports both 24-bit linear addressing up to 16 MB of external memory and the legacy Z80-compatible 64 KB addressing mode, making it a drop-in upgrade path for classic Z80/HD64180 designs while retaining object-code compatibility. An 8-bit microcontroller (MCU) is a single-chip processor whose internal datapath and ALU are 8 bits wide; it integrates CPU, non-volatile program memory, working RAM, and peripherals on one die, and is typically used in cost-sensitive, deterministic, real-time embedded systems. The eZ80 Acclaim! family extends the classic Z80 instruction set architecture with a pipelined, single-cycle core and modern peripherals, positioning it between classic 8-bit MCUs and higher-end 32-bit ARM Cortex-M parts in both performance and ease of migration. Key features of the EZ80F91AZ050SG include a built-in 10/100 Mbps Ethernet MAC (EMAC) with MII/RMII interface, a multi-channel DMA controller, four 16-bit timers, a watchdog timer, and 32 general-purpose I/O lines. A peripheral set with USB 2.0 full-speed (function), I2C, SPI, two UARTs (one with IrDA), and an external memory interface gives the part a rich connectivity footprint for embedded communication designs. The architecture combines Z80 object-code compatibility with single-cycle instruction execution, a 24-bit linear address space for C compilers, and a deterministic interrupt structure. The on-chip EMAC and PHY-friendly MII/RMII interface enable direct connection to industrial Ethernet PHYs without an external controller, and the integrated DMA engine offloads block transfers for high-throughput serial or memory-to-memory operations. Typical applications include industrial Ethernet nodes (Modbus TCP, EtherNet/IP gateways), point-of-sale (POS) terminals, security and access-control panels, embedded communication routers, and legacy Z80/HD64180 system upgrades. The wide external memory bus (up to 16 MB) also makes the device suitable for data-logging and protocol-conversion products. When designing with the EZ80F91AZ050SG, allocate the decoupling network specified in the Zilog product specification (PS0192) on every VDD/VDDA pin pair and follow Zilog's recommended power-up sequence for EMAC and PLL bias pins. For new designs, prefer the lead-free AZ050EG suffix variant; the AZ050SG suffix is functionally equivalent and pin-compatible but uses a different lead-finish callout per Zilog ordering information. This page synthesizes Zilog product-specification data, distributor pricing and stock from DigiKey/Mouser/Octopart, same-family Zilog pin-compatible variants, and practical design notes that are not duplicated on a single distributor listing, so that an engineer can evaluate, source, and design with the part in one view.

Cotação Contato
EZ80F91GAZ0BEG - 50MHz 8-bit eZ80 MCU 256KB Flash | Zilog
EZ80F91GAZ0BEG

EZ80F91GAZ0BEG - 50MHz 8-bit eZ80 MCU 256KB Flash | Zilog

The Zilog EZ80F91GAZ0BEG is a high-performance 8-bit eZ80Acclaim! flash microcontroller built around the eZ80 CPU core, operating at a maximum clock speed of 50 MHz with single-cycle instruction fetch, and packaged in a 144-pin LQFP (20 mm x 20 mm). It integrates 256 KB of on-chip flash, 16 KB of SRAM, and a 10/100 Ethernet MAC with MII/RMII interface, making it a single-chip solution for connected embedded designs. An 8-bit microcontroller (MCU) is a programmable processor whose data path and arithmetic logic unit are 8 bits wide, optimized for cost-sensitive, deterministic control tasks. The eZ80 CPU extends the classic Z80 instruction set, allowing the device to operate in Z80-compatible 64 KB addressing mode or full 24-bit addressing mode that addresses up to 16 MB of linear memory, bridging legacy Z80 codebases with modern memory-intensive applications. The EZ80F91 family sits within Zilog's eZ80Acclaim! portfolio of flash microcontrollers, targeting embedded networking and industrial control. Key features of the EZ80F91GAZ0BEG include a 50 MHz CPU core with 10 MIPS peak performance, an on-chip 10/100 Ethernet MAC, a full-speed USB 2.0 (12 Mbps) device/host controller, two UARTs, I2C and SPI peripherals, an 8-channel 10-bit ADC, four 16-bit timers, and a real-time clock with separate power domain. The integrated crypto accelerator (when enabled) supports DES, 3DES, and AES, supporting the ZGATE security feature set. The eZ80F91 uses a 3-stage pipelined architecture and 16-MB linear memory map. The integrated Ethernet MAC, USB, and crypto blocks share the high-speed peripheral bus, while legacy Z80-compatible peripherals (UART, timers, GPIO) retain their original register mappings. This hybrid architecture allows developers to port Z80/Z180 code while adding modern connectivity. Typical applications include industrial control, embedded communication gateways, point-of-sale terminals, security and access control panels, building automation controllers, and networked sensor hubs. The integrated Ethernet and USB make it especially useful for low-cost networked devices. When designing with the EZ80F91GAZ0BEG, ensure the 3.0V to 3.6V supply is decoupled with a 100 nF ceramic capacitor near each VDD pin pair. The 50 MHz clock requires a 50 ppm crystal for USB and Ethernet timing accuracy. For industrial noise immunity, place a ferrite bead between the analog AVDD and digital VDD rails. This page synthesizes distributor pricing, application circuits, and pin-compatible alternatives not found in the manufacturer datasheet, helping engineers select and source the EZ80F91GAZ0BEG efficiently.

Cotação Contato
EZ80L92AZ020SG - eZ80 8-Bit MCU 20MHz ROMless LQFP-100 | Zilog
EZ80L92AZ020SG

EZ80L92AZ020SG - eZ80 8-Bit MCU 20MHz ROMless LQFP-100 | Zilog

The Zilog EZ80L92AZ020SG is an 8-bit eZ80 Acclaim! microcontroller IC operating at 20 MHz with a ROMless memory architecture, housed in a 100-pin LQFP (Low-profile Quad Flat Package). An 8-bit ROMless microcontroller is a class of embedded processor that executes program code stored entirely in external memory devices rather than on-chip flash or ROM. The ROMless approach gives system designers freedom to select external flash size, update firmware in the field, and build modular memory subsystems. The eZ80 core is a Z80-compatible architecture that executes instructions roughly 3x faster than a classic Z80 at the same clock frequency, while remaining binary-compatible with the vast Z80 software ecosystem. Key features of the EZ80L92AZ020SG include the 20 MHz eZ80 core, 24-bit linear address space supporting up to 16 MB of external memory, two UARTs with IrDA support, I2C and SPI serial interfaces, and six 16-bit timers. The device is lead-free and qualified for standard commercial temperature operation. Technically, the eZ80L92 integrates a Z80-compatible CPU core with a rich on-chip peripheral set and an external bus controller, enabling designs that mix legacy Z80 code with modern peripherals. The wide external memory interface allows glueless connection of SRAM, flash, and Ethernet companion devices from the eZ80 Acclaim! family ecosystem. Typical applications include industrial control systems, legacy Z80 equipment upgrades, Ethernet-connected embedded modules (such as the eZ80L92 module reference design), data loggers, and communication interface bridges. When designing with this ROMless device, budget external flash access wait states and lay out the address/data bus with controlled trace lengths for reliable 20 MHz operation. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
F-XC866-4FRI - 8-Bit XC800 MCU 16KB Flash 26.7MHz | Infineon
F-XC866-4FRI

F-XC866-4FRI - 8-Bit XC800 MCU 16KB Flash 26.7MHz | Infineon

The Infineon F-XC866-4FRI is an 8-bit single-chip microcontroller based on the high-performance XC800 CISC core with on-chip FLASH memory and integrated peripherals. The device operates at up to 26.7 MHz CPU clock, integrates 16 KB on-chip program FLASH and 768 B RAM, and is housed in a PG-TSSOP-38 surface-mount package. It combines a powerful 8051-compatible instruction set with embedded peripherals tuned for cost-sensitive industrial and automotive sensor applications. An 8-bit microcontroller (MCU) is a programmable logic device that integrates a CPU, non-volatile program memory, volatile data memory, and peripheral blocks onto a single silicon die. Within the broader semiconductor taxonomy, an 8-bit MCU is a sub-class of microcontroller, itself a sub-class of embedded processor, which falls under the Integrated Circuits hierarchy. The Infineon XC800 family specifically targets applications requiring deterministic real-time response, on-chip analog signal conditioning, and high immunity to automotive electromagnetic interference. Key features of the F-XC866-4FRI include a 5 V single-voltage supply with on-chip voltage regulator and on-chip oscillator, embedded ADC for analog signal acquisition, capture/compare units (CCU) for PWM generation, and a MultiCAN node for automotive network interfacing. The on-chip voltage regulator enables operation from a single 5 V supply, simplifying PCB power design, while the embedded oscillator eliminates the external crystal in many cost-driven applications. These features collectively support sensor signal acquisition, actuator control, and LIN-bus networked nodes. Architecturally, the F-XC866-4FRI employs a Harvard-style memory organization with separate program and data paths. The on-chip FLASH supports in-system programming (ISP) and in-application programming (IAP) for field firmware updates. The MultiCAN module provides hardware-accelerated CAN 2.0B frame handling, offloading the CPU and improving real-time responsiveness. The capture/compare and PWM units operate independently of the CPU, supporting high-resolution timing without software overhead. Typical applications include automotive body electronics such as door modules, seat controllers, and lighting controllers; industrial sensor signal conditioning; small motor control in HVAC dampers and pumps; and LIN-bus slave nodes communicating with a central body controller. The on-chip oscillator with PLL multiplication allows flexible clock generation without external crystals. When designing with the F-XC866-4FRI, ensure the supply decoupling follows Infineon reference design guidelines - a 100 nF ceramic capacitor close to each VDD pin plus a bulk tantalum or aluminum-polymer capacitor on the 5 V rail. The MultiCAN bus lines require external ESD protection and common-mode chokes for automotive EMC compliance, and unused GPIO pins should be configured as outputs with defined levels to minimize current leakage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an engineer-focused overview optimized for sourcing, replacement, and design decisions.

Cotação Contato
F280023PMSR - C2000 32-bit MCU, 100MHz, 64KB Flash, 64-LQFP | Texas Instruments
F280023PMSR

F280023PMSR - C2000 32-bit MCU, 100MHz, 64KB Flash, 64-LQFP | Texas Instruments

The Texas Instruments F280023PMSR is a C2000™ 32-bit real-time microcontroller from the F28002x family, featuring a C28x CPU core with FPU and TMU running at 100 MHz, paired with 64 KB (32K x 16) of flash memory and packaged in a 64-pin LQFP (PM) measuring 10x10 mm. The device integrates a single-precision floating-point unit and a trigonometric math unit, making it purpose-built for control-loop math in power-conversion and motor-drive applications. Per the LCSC distributor listing, this MPN carries the 'S' temperature grade, supporting -40°C to 125°C junction temperature in a natural convection environment. A C2000 microcontroller is a 32-bit MCU family engineered specifically for real-time control. In the broader taxonomy, the F280023PMSR sits as: microcontroller -> embedded MCU -> 32-bit MCU -> real-time control MCU -> C2000 family -> F28002x sub-family. Unlike general-purpose MCUs that prioritize connectivity or low power, C2000 devices focus on deterministic interrupt latency and high-resolution PWM generation, which are foundational for digital control of switches, motors, and power converters. Key features include the 100 MHz C28x core with hardware FPU/TMU for single-cycle trigonometric math, 64 KB flash, integrated control peripherals (ePWM, eCAP, eQEP), analog comparators and ADCs, plus InstaSPIN-FOC library compatibility. The device's FPU/TMU offloads math-intensive routines such as Park/Clarke transforms, freeing the CPU for application logic. The 64-LQFP package offers generous GPIO and a generous PCB thermal pad footprint for cost-sensitive designs. Architecturally, the F28002x combines the legacy C28x DSP-style core with a C28x+CLA-style bus matrix and a tightly-coupled control-law accelerator option in higher SKUs. The FPU executes single-precision IEEE-754 arithmetic in hardware, while the TMU accelerates sin, cos, arctan, and square-root operations used in field-oriented control (FOC) firmware. Typical applications include solar inverters, industrial motor drives (BLDC/PMSM), digital power supplies, traction inverters, and LED lighting drivers. The integrated PWM and ADC peripherals make it a strong fit for any closed-loop digital control system that demands deterministic sub-microsecond response. When designing with this part, ensure your linker script reserves the correct flash wait-state configuration for 100 MHz operation, and review the boot-ROM GPIO multiplexing table before laying out the PCB. This page synthesizes distributor pricing, same-family F28002x drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
F280045PMSR - C2000 32-bit MCU, 100MHz, 256KB Flash | TI
F280045PMSR

F280045PMSR - C2000 32-bit MCU, 100MHz, 256KB Flash | TI

The Texas Instruments F280045PMSR is a C2000™ 32-bit Piccolo™ microcontroller with a 100 MHz C28x CPU core, 256 KB of on-chip flash, and a 64-pin LQFP (PM) package measuring 10x10 mm. It integrates a single-precision floating-point unit (FPU) and a Trigonometric Math Unit (TMU) for accelerated math operations commonly required in real-time control loops. A microcontroller (MCU) is a programmable processor that integrates a CPU core, memory (Flash and RAM), and peripherals into a single silicon die. The C2000 family sits inside the broader microcontroller taxonomy as MCU -> 32-bit MCU -> DSP-enhanced MCU -> real-time control MCU, and is purpose-built for digital power conversion, motor control, and signal-conditioning applications where deterministic, sub-microsecond interrupt response is required. Key features include 256 KB (256K x 8) of flash, 100 KB of RAM, fourteen 12-bit ADC channels, two 12-bit DAC outputs, three on-chip programmable gain amplifiers (PGAs), and a Sigma-Delta Filter Module (SDFM) for isolated current/voltage sensing. Communication peripherals include SPI, SCI/UART, I2C, CAN, and LIN. The 1.14 V to 1.32 V core supply is generated internally from a 3.3 V rail via an integrated voltage regulator. The architecture pairs a Harvard-style bus with a tightly coupled control-law accelerator (CLA) and the FPU/TMU pair, executing trigonometric and matrix operations in hardware. This reduces software loop latency versus a software-emulated math approach, allowing higher switching frequencies in digital power supplies. Typical applications include digital totem-pole PFC converters, solar inverters, server/telecom SMPS, industrial motor drives, traction inverters, EV charging stations, and battery management systems. The SDFM and PGA blocks particularly benefit isolated shunt-based current sensing in high-voltage systems. When designing with this device, ensure the 3.3 V supply is decoupled with at least one 1 µF and one 100 nF ceramic capacitor near each VDDS pin, and follow TI's SPRS942 layout guidelines for the LQFP PM package to keep digital return currents out of the analog ground domain. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes that are not found in the manufacturer datasheet alone.

Cotação Contato
F280049CPZQR - 32-bit C2000 MCU 100MHz 256KB Flash 100-LQFP | TI
F280049CPZQR

F280049CPZQR - 32-bit C2000 MCU 100MHz 256KB Flash 100-LQFP | TI

The Texas Instruments F280049CPZQR is a 32-bit C2000 Piccolo-class automotive-grade microcontroller (MCU) running at 100 MHz with 256 KB of integrated Flash, 100 KB of SRAM, and a C28x CPU core augmented by a single-precision FPU, TMU accelerator, and a programmable Control Law Accelerator (CLA). The device is housed in a 100-pin LQFP (PZ) package measuring 14 mm x 14 mm with 0.5 mm lead pitch. What is a C2000 Piccolo MCU? The C2000 family is Texas Instruments' real-time microcontroller platform optimized for closed-loop digital control of power conversion, motor drive, and lighting systems. Piccolo is the cost- and feature-optimized sub-family within C2000, sitting below the Delfino performance line but above the value-oriented F28002x line. The hierarchy is: C28x core -> C2000 real-time MCU -> digital signal controller -> embedded processor. Key features of the F280049CPZQR include four 12-bit analog-to-digital converters (ADCs) for high-speed sensing, two 12-bit DACs for analog reference generation, three on-chip programmable gain amplifiers (PGAs), sigma-delta filter (SDFM) channels for isolated current sensing, four configurable logic blocks (CLBs) for hardware customization, and a rich communications peripheral set including CAN-FD, SPI, I2C, UART, and LIN. The supply voltage range of 1.14 V to 1.32 V for the core and 3.3 V for the I/O ring makes it compatible with industrial and automotive power trees. Architecturally, the F280049C variant differs from the F280049 base device by adding CLB logic. The C28x core runs at 100 MHz (10 ns cycle time), delivering 100 MIPS with deterministic interrupt latency under 25 cycles, which is critical for digital power control loops operating at sub-microsecond periods. The integrated CLA offloads time-critical control tasks from the CPU, freeing it for higher-level supervisory functions, communications, and fault handling. Typical applications include on-board chargers (OBC) and DC-DC converters for electric vehicles, traction inverters, solar micro-inverters, telecom rectifiers, server power-supply units (PSU), digital LED drivers, and industrial motor-control servo drives. The wide operating temperature range of -40 C to +125 C and AEC-Q100 qualification make the part suitable for under-hood automotive environments. Designers should size local decoupling per the datasheet (typically 1 x 100 nF + 1 x 4.7 uF per VDD pin pair) and follow the PCB layout recommendations in the F28004x hardware-design guide. Because this is a 0.5 mm-pitch LQFP, hand-rework is feasible - unlike BGAs in the same family - which simplifies prototype bring-up and field rework. This page consolidates distributor pricing, verified drop-in alternatives, application notes, and design tips not found in the manufacturer datasheet alone.

Cotação Contato
F280049CPZS - 100MHz C28x MCU 256KB Flash LQFP-100 | TI
F280049CPZS

F280049CPZS - 100MHz C28x MCU 256KB Flash LQFP-100 | TI

The Texas Instruments F280049CPZS is a C2000™ 32-bit Piccolo microcontroller built on the C28x core, running at 100 MHz with an integrated single-precision FPU, Trigonometric Math Unit (TMU), and Control Law Accelerator (CLA), packaged in a 100-pin LQFP (PZ) measuring 14x14 mm. It integrates 256 KB of flash, 100 KB of RAM, an InstaSPIN-FOC motor-control library, Configurable Logic Block (CLB), programmable gain amplifiers (PGAs), and Sigma-Delta Filter Module (SDFM) peripherals on-chip. A C2000 Piccolo microcontroller is a real-time control MCU in TI's C2000 family, architected for high-performance digital control loops in power electronics and motor drives. The C28x core executes deterministic control code at fixed cycle counts; the on-chip FPU accelerates floating-point math while the TMU offloads sin/cos/atan/division, all critical for field-oriented control. C2000 MCUs occupy the "real-time MCU" stratum in TI's MCU taxonomy (C2000 > TMS320 > 32-bit MCU > microcontroller > embedded processing). The device supports 3.0-3.6 V I/O and 1.14-1.32 V core supply via internal LDO. It includes 21 channels of 12-bit ADC, two 12-bit DACs, multiple high-resolution PWM modules with valley switching, plus CAN-FD, SPI, UART, I2C, and USB connectivity. On-chip PGAs with up to 12x gain enable direct current-shunt feedback without external amplifiers in motor drives. F280049CPZS targets digital power converters (totem-pole PFC, LLC, phase-shifted full-bridge), industrial motor drives (PMSM, BLDC, ACIM, SR), servo amplifiers, solar inverters, and on-board EV chargers. The InstaSPIN-FOC library identifies motor parameters without rotary sensors in under 2 minutes. Designers should allocate 4-layer PCB with a solid ground pour under the LQFP-100 thermal pad. For SVM at 100 kHz, ensure DC-DC supply ripple is below 50 mVpp. The CLB allows custom logic on-chip, eliminating external CPLDs in many fault-handling circuits. This page consolidates datasheet specifications, drop-in alternatives, distributor stock, and design notes that complement the manufacturer datasheet with selection-oriented engineering context.

Cotação Contato
F28027PTT - 60MHz C28x Piccolo MCU, 64KB Flash | Texas Instruments
F28027PTT

F28027PTT - 60MHz C28x Piccolo MCU, 64KB Flash | Texas Instruments

The Texas Instruments F28027PTT (also known as TMS320F28027PTT) is a 32-bit C2000 Piccolo microcontroller built around the C28x core, operating at up to 60 MHz. It features 64KB (32K x 16) of flash memory and is housed in a 48-pin LQFP (PT) package measuring 7x7 mm. This device is designed for real-time control applications, offering a high level of analog integration and an internal voltage regulator for single-rail operation. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable input/output peripherals on a single chip. The C28x core is a 32-bit fixed-point DSP-optimized architecture from Texas Instruments, specifically engineered for real-time control tasks. It sits within the C2000 family, which is a subset of microcontrollers tailored for industrial and automotive control systems, such as motor drives, power conversion, and digital power supplies. The C28x core excels at executing control algorithms with high precision and low latency, making it a preferred choice for closed-loop systems. Key features of the F28027PTT include a 60 MHz clock speed, 64KB flash memory, and a rich set of control peripherals. It integrates a 12-bit ADC, multiple PWM channels, and communication interfaces like SPI, SCI (UART), and I2C. The device operates over a temperature range of -40°C to 105°C, making it suitable for harsh environments. The internal voltage regulator simplifies power supply design, allowing operation from a single 3.3V rail. Technically, the F28027PTT leverages the C28x core's Harvard architecture, which enables simultaneous instruction and data access, improving throughput. The flash memory supports on-chip programming, facilitating firmware updates in the field. The device also includes a boot ROM with factory-programmed bootloader routines, enabling flexible boot options from various interfaces. The analog-to-digital converter (ADC) offers 12-bit resolution with multiple sample-and-hold channels, crucial for precise sensor measurements in control loops. Typical applications include white goods (such as washing machines and refrigerators), switched-mode power supplies (SMPS), and DC-DC multiple-output power supplies. The F28027PTT's high-performance C28x core and integrated peripherals make it ideal for implementing complex control algorithms like field-oriented control (FOC) for motors and digital power conversion. Its low pin count and small package footprint also suit space-constrained designs. When designing with this device, ensure proper decoupling of the power supply pins and consider the thermal characteristics of the LQFP package. The internal voltage regulator requires an external capacitor for stability. Additionally, the ADC reference pins should be filtered to minimize noise, as this directly impacts measurement accuracy in control applications.

Cotação Contato
F29H859TU-Q1 - Automotive C2000 64-bit MCU | Texas Instruments
F29H859TU-Q1

F29H859TU-Q1 - Automotive C2000 64-bit MCU | Texas Instruments

The Texas Instruments F29H859TU-Q1 is an automotive-grade C2000 real-time microcontroller featuring a 64-bit C29x CPU running at 200MHz with triple-core architecture and lockstep capability. It provides 4MB of flash memory and is designed for functional safety compliance in power electronics, motor control, and GaN/SiC-based applications. The C2000 family is a well-known series of ultra-low-latency MCUs optimized for real-time control. The F29H859TU-Q1 belongs to the F29H85x sub-family, which leverages the next-generation C29 CPU core to enable high power density and high switching frequency operation. This MCU is specifically qualified for automotive environments (Q1 suffix), meeting the stringent reliability and AEC-Q100 standards required in vehicles. Key features of the F29H859TU-Q1 include a triple-core 200MHz C29x CPU with lockstep mode for enhanced safety, 4MB flash memory, and functional safety compliance. The architecture supports advanced real-time control loops, making it suitable for applications like DC-DC converters, traction inverters, on-board chargers, and solar inverters. The F29H859TU-Q1 is available in a BGA package, which is the only practical packaging option for this high pin-count MCU as confirmed by TI support. The device is designed for surface mount assembly and operates across automotive temperature ranges, enabling compact and robust system designs. Typical applications include digital power supply control, motor control for electric vehicles, renewable energy inverters, and industrial automation systems. The high-performance CPU and large flash memory allow for complex algorithms and firmware updates, while the functional safety features ensure reliable operation in safety-critical systems. When designing with the F29H859TU-Q1, engineers should consider adequate thermal management and decoupling for high-speed digital switching. The C29x architecture requires careful attention to power supply stability and PCB layout to maximize performance and safety.

Cotação Contato