Microcontroladores

Produtos (18688)

ATSAM4E16CA-CU - 120MHz Cortex-M4 1MB Flash MCU | Microchip
ATSAM4E16CA-CU

ATSAM4E16CA-CU - 120MHz Cortex-M4 1MB Flash MCU | Microchip

The Microchip Technology ATSAM4E16CA-CU is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 120 MHz with 1 MB (1M x 8) of embedded flash memory, 128 KB of SRAM, and a 100-ball TFBGA (9x9 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the heart of embedded systems. The SAM4E family sits within Microchip's SMART ARM-based MCU portfolio, positioned above the Cortex-M3 based SAM3/SAM4N lines by adding a floating point unit (FPU), DSP instructions, and high-bandwidth peripherals such as an Ethernet MAC for industrial connectivity applications. Key features include the ARM Cortex-M4 core with a 2 KB instruction cache operating at up to 120 MHz, hardware FPU and Thumb-2 instruction support for efficient math-intensive firmware, a Memory Protection Unit (MPU) for robust multi-task software, and a peripheral set spanning UART/USART, SPI, TWI (I2C), PWM, ADC, and Ethernet connectivity. The 1 MB flash supports in-system programming, while the high data bandwidth architecture suits control loops and protocol stacks simultaneously. Technically, the device integrates the Cortex-M4 with DSP extensions, enabling single-cycle MAC operations useful for digital filtering and motor control algorithms. The 2 KB cache reduces flash wait-state penalties at 120 MHz, and the MPU allows privileged/unprivileged code partitioning for safety-oriented designs. Supply operation is specified at 1.2 V core / 3.3 V I/O per distributor data, with industrial temperature support. Typical applications include industrial automation and networking nodes using the on-chip Ethernet MAC, motor control and power conversion leveraging the FPU and PWM peripherals, and connected sensing or gateways that need flash density for communication stacks. The ATSAM4E16CA-CU fits these roles where 120 MHz performance, 1 MB flash, and wired connectivity converge. Design-wise, plan power sequencing between the 3.3 V I/O domain and the 1.2 V core domain, and use bypass capacitors on all VDDIO/VDDCORE ball groups per the datasheet power distribution guidelines. Firmware can be developed in Atmel Studio / Microchip Studio with the SAM4E software package, and the device is programmed via SWD or JTAG. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a complete selection view in one place.

USD $6,68 Em estoque
ATSAM4E16CA-CUR - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4E16CA-CUR

ATSAM4E16CA-CUR - 120MHz Cortex-M4 MCU 1MB Flash | Microchip

The Microchip Technology ATSAM4E16CA-CUR is a 32-bit ARM Cortex-M4 microcontroller with 1 MB (1M x 8) on-chip Flash memory, 128 KB SRAM, and a core clock speed of up to 120 MHz, housed in a 100-ball TFBGA (9x9 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and a rich set of peripherals into one chip, forming the complete embedded controller at the heart of an electronic system. Within the MCU hierarchy, the SAM4E family sits in the high-performance 32-bit tier, above 8-bit MCUs such as the PIC16 series and below application processors, and is commonly deployed in industrial control, consumer products, and connectivity equipment. Key differentiating features include the ARM Cortex-M4 core with an integrated Floating Point Unit (FPU), DSP instructions, and Thumb-2 instruction set, which enable efficient signal processing and math-heavy firmware. The 2 KB cache increases effective memory bandwidth, and the Memory Protection Unit (MPU) supports robust, partitioned firmware architectures. The 1 MB Flash supports complex application images, while the 100-TFBGA (9x9) footprint delivers high I/O density in a compact surface-mount package. Technically, the SAM4E architecture combines a high data bandwidth bus matrix with the 120 MHz Cortex-M4, allowing Flash execution, DMA transfers, and peripheral activity to proceed concurrently. The DSP instructions accelerate filter algorithms, while the hardware FPU eliminates costly software floating-point emulation in control loops, motor control algorithms, and sensor fusion calculations. Typical applications include industrial automation controllers, motor drives, and embedded networking equipment, where the combination of 120 MHz processing, FPU math capability, and 1 MB program memory matches demanding control and communication workloads. For design, note that the -CUR suffix denotes Tape and Reel packaging and an industrial temperature grade; Microchip recommends Revision B material for new prototypes and production per the product page notice. Plan the power and clocking scheme for the 120 MHz operating point using the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives within the SAM4E and related SAM4 families, and practical design notes not found in the manufacturer datasheet alone.

USD $7,48 Em estoque
ATSAM4E16CB-AN - Cortex-M4 120MHz 1MB Flash MCU | Microchip
ATSAM4E16CB-AN

ATSAM4E16CB-AN - Cortex-M4 120MHz 1MB Flash MCU | Microchip

The Microchip Technology ATSAM4E16CB-AN is a 32-bit ARM Cortex-M4 microcontroller with a floating point unit, 1 MB (1M x 8) Flash memory, 120 MHz maximum CPU clock, and a 128 Kbytes SRAM subsystem, housed in a 100-pin LQFP (14 x 14 mm) surface-mount package. A microcontroller (MCU) integrates a processor core, memory, and peripherals on a single silicon die, sitting at the heart of embedded control systems within the broader hierarchy of ARM Cortex-M processor-based devices. The SAM4E Series belongs to Microchip's (formerly Atmel) high-performance SAM family, positioned above the SAM4S entry line by adding an Ethernet MAC and CAN controller for connectivity-focused designs. Key features include the ARM Cortex-M4 core with 2 Kbytes instruction cache, Memory Protection Unit (MPU), DSP instructions and single-cycle MAC, Thumb-2 instruction set, and an FPU for efficient floating-point computation. Peripherals span a 10/100 Ethernet MAC, CAN 2.0B, USB 2.0 device port, multiple USARTs, SPI, TWI, 12-bit ADC and DAC, PWM channels, and a rich timer set. Architecturally, the multi-layer bus matrix delivers high data bandwidth between the 120 MHz core, SRAM banks, and DMA channels, allowing peripherals to move data without CPU intervention. The DSP/FPU extension makes it suitable for control-loop mathematics such as PID, FFT, and motor-control transforms executed in hardware. Typical applications include industrial Ethernet and CAN networking nodes, motor control and power conversion, building automation gateways, and medical instrumentation that needs deterministic 32-bit processing with on-chip networking. Design consideration: the 'AN' temperature suffix denotes the extended temperature range per the ordering code, and Microchip recommends Revision B silicon for new prototypes and production, so verify the device revision marking on the package top. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,30 Em estoque
ATSAM4E16CB-ANR - 120MHz Cortex-M4, 1MB Flash MCU | Microchip
ATSAM4E16CB-ANR

ATSAM4E16CB-ANR - 120MHz Cortex-M4, 1MB Flash MCU | Microchip

The Microchip Technology ATSAM4E16CB-ANR is a 32-bit ARM Cortex-M4 microcontroller running at 120 MHz with 1 MB of embedded Flash memory and an integrated floating point unit (FPU), housed in a 100-pin LQFP (14x14 mm) surface-mount package rated for extended temperature operation. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and a rich set of peripherals onto one chip, forming the computational heart of embedded systems. Within the power-management hierarchy, MCUs sit above simple logic devices and below application processors; the SAM4E family belongs to Atmel/Microchip's ARM Cortex-M line of general-purpose 32-bit microcontrollers targeted at industrial control, connectivity, and high-bandwidth data processing. Key features of the ATSAM4E16CB-ANR include the high data bandwidth architecture highlighted by Microchip, a hardware FPU for efficient single-precision math, and 1 MB (1M x 8) of on-chip Flash program memory. The Cortex-M4 core with DSP instructions accelerates control loops, digital filtering, and sensor fusion algorithms. Extended temperature qualification makes the device suitable for industrial and outdoor environments. The SAM4E series differentiates itself through its connectivity-oriented peripheral set: Microchip positions the SAM4E16C as a Cortex-M4 MCU with FPU and high data bandwidth architecture, targeted at applications that move substantial data between peripherals and memory. The multi-layer bus matrix sustains concurrent DMA transfers alongside core execution, minimizing interrupt latency in communication-heavy designs. Typical applications include industrial automation controllers, networked sensing nodes, motor control systems, and embedded gateways where 120 MHz processing, hardware floating point, and 1 MB of Flash support both control and computation duties in a single chip. Design consideration: when migrating from other SAM4 or SAM3 parts, verify peripheral-clock configuration and revision status - Microchip recommends Revision B devices for prototypes and production, so confirm your board uses the current silicon revision. This page synthesizes distributor pricing data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, making it a complete engineering reference for the ATSAM4E16CB-ANR.

Cotação Em estoque
ATSAM4E16CB-CN - Cortex-M4 120MHz 1MB MCU | Microchip
ATSAM4E16CB-CN

ATSAM4E16CB-CN - Cortex-M4 120MHz 1MB MCU | Microchip

The Microchip Technology ATSAM4E16CB-CN is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz with 1 MB (1M x 8) of embedded Flash memory, housed in a 100-ball TFBGA (9x9 mm) package qualified for extended temperature operation. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded systems hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. The SAM4E family belongs to Microchip (formerly Atmel) ARM-based MCU portfolio, targeting industrial and connectivity applications that need both processing throughput and rich analog integration. Key features of the ATSAM4E16CB-CN include an ARM Cortex-M4 core with a 2 KB cache, Memory Protection Unit (MPU), DSP instructions, and a hardware Floating Point Unit (FPU) executing Thumb-2 instructions. It integrates dual 12-bit ADC and 12-bit DAC channels, Full-Speed USB, an Ethernet MAC, and multiple serial interfaces (USART, SPI, TWI), giving it a high data-bandwidth architecture suited for communication-heavy designs. Architecturally, the Cortex-M4 pipeline with FPU offloads float-intensive control loops and signal processing from software, while the 2 KB cache sustains execution efficiency from on-chip Flash at 120 MHz. The extended temperature (-CN suffix) grade and MRL B (Microchip Reel Label) TFBGA, GREEN packaging make it suitable for harsh environments and lead-free, RoHS-aligned assembly flows. Typical applications include industrial automation controllers, networked sensor gateways using the Ethernet MAC and USB, and motor control or power conversion systems that leverage the FPU, dual ADCs, and PWM peripherals. The 9x9 mm TFBGA footprint also fits space-constrained embedded designs. Design consideration: the 100-ball fine-pitch BGA requires controlled-impedance, microvia-capable PCB fabrication and X-ray inspection for assembly, so verify your manufacturing partner supports 0.8 mm ball-pitch BGA assembly before layout. Note that Microchip recommends Revision B parts for new designs and prototypes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single verified reference for the ATSAM4E16CB-CN.

USD $3,79 Em estoque
ATSAM4E16CB-CNR - 120MHz Cortex-M4 1MB Flash MCU | Microchip
ATSAM4E16CB-CNR

ATSAM4E16CB-CNR - 120MHz Cortex-M4 1MB Flash MCU | Microchip

The Microchip Technology ATSAM4E16CB-CNR is an ARM Cortex-M4 microcontroller (MCU) running at 120 MHz with 1 MB (1M x 8) embedded Flash memory, housed in a 100-ball TFBGA (9x9 mm) package. It belongs to the SAM4E family and integrates a floating point unit (FPU) and a high data bandwidth architecture targeted at connected industrial and consumer applications. A microcontroller is a single-chip embedded computer that combines a processor core, memory, and peripherals on one die; the SAM4E sits within the hierarchy of 32-bit MCU -> ARM Cortex-M core family -> embedded microcontroller -> system-on-chip building block. The Cortex-M4 core with FPU executes DSP-class instructions while maintaining deterministic, low-latency interrupt handling that real-time embedded firmware demands. Key features of the ATSAM4E16CB-CNR include 1 MB of on-chip Flash, full-speed USB device operation, dual ADC/DAC converters, and an extended industrial temperature grade with RoHS/GREEN packaging (MRL B, Tape & Reel per Mouser listing data). The high-bandwidth bus matrix allows Flash, SRAM, and peripherals to operate concurrently, maximizing throughput for control loops and communication stacks. Technical depth: the device implements the Cortex-M4 pipeline with hardware FPU, and the SAM4E peripheral set couples a high-speed USB interface with precision analog conversion, making it well suited to systems that need both fast digital I/O and signal acquisition on a single chip. Microchip recommends Revision B silicon for new prototype and production designs. Typical applications include industrial control nodes, USB-connected instruments, motor control and power conversion platforms, and embedded gateways that benefit from integrated analog and USB connectivity in a compact 9x9 mm ball-grid footprint. Design consideration: BGA-100 assembly requires a controlled reflow profile and X-ray inspection capability; verify land-pattern and ball-map data in the manufacturer datasheet before layout release. This page synthesizes distributor pricing, verified drop-in alternatives, and sourcing data not consolidated on the manufacturer product page.

USD $9,64 Em estoque
ATSAM4E16EA-AUR - 120MHz Cortex-M4 1MB Flash MCU | Microchip
ATSAM4E16EA-AUR

ATSAM4E16EA-AUR - 120MHz Cortex-M4 1MB Flash MCU | Microchip

The Microchip Technology ATSAM4E16EA-AUR is a 32-bit ARM Cortex-M4 microcontroller running at 120 MHz with 1 MB (1M x 8) embedded Flash memory, housed in a 144-pin LQFP (20 x 20 mm) surface-mount package on Tape & Reel. Based on the Atmel/Microchip SAM4E series, it integrates a hardware floating point unit (FPU), DSP instructions, and a high data bandwidth bus architecture for embedded control applications. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, forming the lowest level of the embedded-system hierarchy: ARM Cortex-M4 core -> SAM4E MCU family -> embedded processing -> semiconductor device. MCUs replace discrete processor-plus-memory combinations where integration, power efficiency, and cost matter most. Key features of the ATSAM4E16EA include the Cortex-M4 core with FPU at up to 120 MHz, 1 MB Flash and 128 KB SRAM for code and data, Ethernet MAC and CAN peripherals for networked industrial designs, USB device support, and multiple serial interfaces (USART, SPI, I2C/TWI). Operating voltage is 1.62V to 3.6V with an industrial temperature rating. Architecturally, the SAM4E series pairs the high-bandwidth multi-layer bus matrix with DMA on most peripherals, letting the FPU-accelerated core keep signal-processing loops deterministic while communication channels move data without CPU intervention. This makes the part well suited to motor control, gateways, and human-machine interface nodes. Typical applications include industrial automation controllers, Ethernet-connected embedded gateways, motor drives, and building control systems where the CAN and Ethernet MAC reduce external component count. Design consideration: for new designs Microchip recommends considering Revision B silicon for prototypes and production; also plan decoupling and clock layout per the manufacturer hardware design guidelines. This page synthesizes distributor pricing, drop-in family alternatives, application pairings, and practical design notes not found in the manufacturer datasheet.

USD $11,00 Em estoque
ATSAM4E16EB-AN - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4E16EB-AN

ATSAM4E16EB-AN - 120MHz Cortex-M4 MCU 1MB Flash | Microchip

The Microchip Technology ATSAM4E16EB-AN is a 32-bit ARM Cortex-M4 microcontroller running at 120 MHz with 1 MB embedded Flash and a 144-pin LQFP (20x20 mm) package. It integrates a floating point unit (FPU), 117 general-purpose I/O lines, and a rich connectivity set including Ethernet MAC, CAN bus, USB, SPI, UART/USART, IrDA, SD/SDIO, and EBI/EMI external bus interface. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded systems from industrial automation to consumer devices. The SAM4E series belongs to Microchip's (formerly Atmel) 32-bit SAM ARM flash MCU family, positioned above the SAM3 and SAM4N series where high bandwidth, Ethernet, and math-intensive processing are required. Key differentiating features include the 120 MHz Cortex-M4 core with hardware FPU for single-precision math, a high data bandwidth bus architecture, integrated 10/100 Ethernet MAC, dual CAN 2.0B controllers, a 12-bit ADC, PWM channels, DMA, and safety peripherals such as brown-out detect, power-on reset, and a watchdog timer. This combination suits networked and control-oriented designs that would otherwise require multiple chips. Technically, the device operates from a 1.2V/3.3V supply scheme (3.3V main, 1.2V core regulation) and is offered in extended temperature, green/RoHS packaging. The Flash-based program memory supports in-system programming, and the external bus interface allows glueless attachment of SRAM, NOR Flash, and LCD modules. Typical applications include industrial Ethernet gateways, motor control and solar inverter systems, building automation nodes, and embedded networking equipment where CAN, Ethernet, and USB must coexist on one 120 MHz controller. Design consideration: the LQFP-144 is a fine-pitch (0.5 mm) surface-mount package - plan 4-layer PCB stackups and verify Ethernet PHY magnetics placement early; pinout planning against the 117 I/O budget is essential before routing. This page synthesizes distributor pricing, stock data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet, as of 2026-09-20.

USD $8,20 Em estoque
ATSAM4E16EB-ANR - Cortex-M4 120MHz 1MB MCU | Microchip
ATSAM4E16EB-ANR

ATSAM4E16EB-ANR - Cortex-M4 120MHz 1MB MCU | Microchip

The Microchip Technology ATSAM4E16EB-ANR is a 32-bit ARM Cortex-M4 microcontroller (MCU) running at 120 MHz with 1 MB (1M x 8) embedded Flash memory, housed in a 144-pin LQFP (20x20 mm) surface-mount package supplied on Tape & Reel. A microcontroller is a single-chip computer that integrates a processor core, memory, and peripherals such as UARTs, SPI, I2C, ADCs, and timers on one die. Within the embedded-systems hierarchy, a 32-bit MCU such as the SAM4E family sits above 8-bit MCUs (like Microchip PIC16 devices) and below application processors, serving real-time industrial and connectivity tasks. Key features include the ARM Cortex-M4 core with a floating point unit (FPU), which accelerates DSP and control-loop math; a high data bandwidth bus architecture for fast peripheral throughput; and 1 MB of Flash for substantial application code. The SAM4E series integrates an Ethernet MAC and USB device port for networked nodes, per the SAM4E16E product family description from Microchip. The revision B silicon (the B suffix in ATSAM4E16EB) is the version Microchip recommends for new prototypes and production, offering corrected errata over revision A. Supply voltage is 3.3 V with 1.2 V internal core operation, per distributor parametric listings (1.2V/3.3V). The extended temperature suffix supports demanding industrial environments, and the GREEN, MRL-B designation indicates RoHS-compliant matte-tin lead finish. Typical applications include industrial automation nodes with Ethernet connectivity, motor control systems leveraging the FPU for field-oriented control, embedded gateways, and test and measurement equipment requiring 120 MHz compute headroom. Design consideration: allocate PCB decoupling per the SAM4E16E datasheet power supply recommendations and verify errata for revision B silicon before final tape-out. As an LQFP-144 device, plan for 0.5 mm fine-pitch soldering and adequate ground-plane thermal relief. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, per verified web data as of 2026-09-20.

USD $12,24 Em estoque
ATSAM4E16EB-CN - Cortex-M4 120MHz 1MB Flash MCU | Microchip
ATSAM4E16EB-CN

ATSAM4E16EB-CN - Cortex-M4 120MHz 1MB Flash MCU | Microchip

The Microchip Technology ATSAM4E16EB-CN is a 32-bit ARM Cortex-M4 microcontroller (MCU) running at 120 MHz with 1 MB (1M x 8) of embedded Flash memory, integrated FS USB, dual ADC/DAC analog front ends, and a floating point unit, housed in a 144-ball LFBGA (10 x 10 mm) package with extended temperature and green (RoHS-style) MRL B material designation. A 32-bit microcontroller is the central processing element of an embedded system, combining a processor core, memory, and peripherals on a single silicon die. Within the power-management hierarchy of embedded devices, the MCU sits above simple 8-bit controllers and below application processors, making it the standard choice for real-time control, connectivity, and human-interface tasks. The SAM4E family is Microchip (formerly Atmel) ARM Cortex-M4 line of general-purpose MCUs. Key differentiating features include the Cortex-M4 core with a hardware floating point unit (FPU) for efficient DSP and math-intensive code, a high data bandwidth bus architecture, 120 MHz maximum operating frequency, and 1 MB of on-chip Flash for large application firmware images. The full-speed USB device port and dual ADC/DAC analog subsystem reduce external component count in measurement and communication designs. Architecturally, the SAM4E16E series targets applications that need both compute throughput and deterministic real-time behavior. The ARMv7E-M architecture supports DSP instructions, and the FPU accelerates single-precision math used in motor control algorithms, sensor fusion, and communication stacks. The extended-temperature (-CN) grading supports deployment outside benign office environments. Typical applications include industrial motor control and automation nodes, embedded networking equipment with USB connectivity, and precision data acquisition systems that leverage the dual ADC/DAC resources. Design consideration: BGA packages require controlled-impedance multilayer PCB fabrication and reflow assembly; confirm your CM and inspection capability (X-ray for ball integrity) before committing to the 144-LFBGA footprint. This page synthesizes distributor pricing and availability, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

USD $6,05 Em estoque
ATSAM4E16EB-CNR - Cortex-M4 120MHz 1MB MCU | Microchip
ATSAM4E16EB-CNR

ATSAM4E16EB-CNR - Cortex-M4 120MHz 1MB MCU | Microchip

The Microchip Technology ATSAM4E16EB-CNR is a 32-bit ARM Cortex-M4 microcontroller running at 120 MHz with 1 MB (1M x 8) of embedded Flash memory, housed in a 144-ball LFBGA (10x10 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals on one die, sitting at the heart of the embedded-systems hierarchy: MCU -> embedded processor -> SoC. The SAM4E family belongs to Microchip (formerly Atmel) ARM-based flash MCU lineup, positioned for industrial and connectivity-oriented designs that need both processing throughput and rich analog/digital integration. Key features of the ATSAM4E16EB-CNR include the ARM Cortex-M4 core with hardware floating point unit (FPU), a high data bandwidth bus architecture, 1 MB of on-chip Flash for code storage, and a 120 MHz maximum operating frequency. The extended-temperature, green (RoHS-oriented) LFBGA package supports high-density PCB layouts where a 10x10 mm footprint conserves board area compared with larger LQFP alternatives. Technically, the SAM4E16E series combines the Cortex-M4 pipeline with Microchip's SAM peripheral set, targeting applications such as industrial networking, gateways, and control nodes where the MCU must service multiple communication interfaces concurrently. The floating point unit accelerates control-loop math (PID filtering, DSP routines) without software emulation overhead, and the wide Flash array supports large protocol stacks and OTA-style firmware images. Typical applications include industrial automation controllers, building automation and gateways, embedded networking equipment, and motor-control or instrumentation nodes that benefit from 120 MHz deterministic execution and hardware FPU math. Design consideration: BGA packages require controlled-impedance, fine-pitch PCB fabrication with X-ray inspection capability for rework; plan your stack-up and land-pattern (per the Microchip LFBGA144 footprint in the datasheet) before committing layout. This page synthesizes distributor pricing, drop-in alternatives from the SAM4E family, and practical design notes not found in the manufacturer datasheet, giving engineers a single citable reference for sourcing and selection decisions.

Cotação Em estoque
ATSAM4E8CA-AN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAM4E8CA-AN

ATSAM4E8CA-AN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM4E8CA-AN is a 32-bit ARM Cortex-M4 flash microcontroller delivering 120 MHz core frequency, 512 KB (512K x 8) embedded Flash, and 128 KB SRAM in a 100-pin LQFP (14x14 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded systems hierarchy: MCU -> embedded processor -> ARM Cortex-M family -> system-on-chip. The SAM4E series belongs to Microchip (formerly Atmel) SMART ARM-based MCU portfolio, which targets connectivity, control, and sensing applications. Key features include an ARM Cortex-M4 core with hardware floating point unit (FPU), a high data bandwidth bus architecture, and a rich peripheral set including Ethernet MAC, USB, CAN, and high-speed ADC channels. The 120 MHz operating frequency with single-cycle FPU makes this part suited for motor control and communications tasks that require deterministic math performance. Technically, the ATSAM4E8CA-AN operates from a 1.2V core / 3.3V I/O supply domain per distributor specification data, uses gull-wing terminals in a square LQFP body, and is rated for industrial temperature applications. The 512 KB Flash array supports in-system programming, and the peripheral DMA controller offloads data movement from the CPU, improving real-time behavior in communication-heavy designs. Typical applications include industrial automation controllers, Ethernet-connected sensor nodes, motor control drives, and building management systems where a Cortex-M4 with integrated Ethernet removes the need for an external MAC. A key design consideration: verify Flash sizing against firmware roadmap. If code growth is expected, the pin-compatible 1 MB ATSAM4E16CA variants in the same 100-pin LQFP footprint provide a low-risk upgrade path without PCB rework. This page synthesizes distributor pricing, drop-in alternatives, design notes, and cross-reference guidance not found on the manufacturer datasheet alone.

USD $6,05 Em estoque
ATSAM4E8CA-AU - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAM4E8CA-AU

ATSAM4E8CA-AU - 120MHz Cortex-M4 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM4E8CA-AU is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 120 MHz, integrating 512 KB of flash memory and a 100-pin LQFP (14x14 mm) package. As a member of the SAM4E series, it combines DSP and floating-point instruction capability with a high-bandwidth bus architecture for embedded control and connectivity applications. A microcontroller (MCU) is a single-chip computer that merges a processor core, nonvolatile flash memory, SRAM, and a rich set of peripherals onto one die. Within the power management hierarchy of embedded systems, the MCU sits at the top of the control chain, coordinating sensors, actuators, and communication interfaces. The SAM4E family belongs to Microchip (formerly Atmel) SMART ARM-based MCU portfolio, positioned between general-purpose SAM4S parts and Ethernet-focused industrial controllers. Key differentiating features include the Cortex-M4 core with hardware FPU and Thumb-2 DSP instructions operating at 120 MHz, 512 KB of embedded flash with dual-bank boot capability, and an integrated 10/100 Ethernet MAC. The high data-bandwidth multi-layer bus matrix allows flash execution and peripheral DMA traffic to proceed without contention, sustaining deterministic real-time response. Architecturally, the device employs the ARMv7E-M profile with a 3-stage pipeline, nested vectored interrupt controller, and multiple DMA-enabled peripherals. Per Microchip's product page for the ATSAM4E8C, Microchip recommends Revision B silicon for new prototype and production designs, reflecting an active lifecycle and process maturity. Typical applications include industrial networking nodes leveraging the Ethernet MAC, motor control and digital power conversion exploiting the FPU and ADC peripherals, and building automation or IoT gateways requiring 32-bit headroom. Supply voltage per distributor data spans 1.2 V core domains with 1.62 V to 3.6 V I/O operation in the -AU industrial temperature grade. Design consideration: budget PCB decoupling on all VDDIO/VDDCORE pins and verify Ethernet PHY pairing early, since the on-chip MAC requires an external PHY such as the KSZ8081RNB over RMII. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7,45 Em estoque
ATSAM4E8CA-CU - 120MHz ARM Cortex-M4 MCU 512KB | Microchip
ATSAM4E8CA-CU

ATSAM4E8CA-CU - 120MHz ARM Cortex-M4 MCU 512KB | Microchip

The Microchip Technology ATSAM4E8CA-CU is a 32-bit ARM Cortex-M4 microcontroller from the SAM4E series running at 120 MHz with 512 KB (512K x 8) of embedded Flash memory, housed in a 100-ball TFBGA package measuring 9x9 mm. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, forming the lowest complete level of an embedded system hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. MCUs are the workhorses of embedded electronics, executing control, sensing, and connectivity tasks in everything from appliances to industrial automation. The ARM Cortex-M4 architecture used here is a 32-bit RISC core widely adopted across the microcontroller industry. Key features of the ATSAM4E8CA-CU include the 120 MHz Cortex-M4 core with a floating point unit (FPU) for efficient DSP and math operations, 512 KB of on-chip Flash for code storage, and the high data bandwidth bus architecture that Microchip highlights for the SAM4E family. Per the Microchip product page, the SAM4E8C features an FPU and a high data bandwidth architecture targeted at connectivity and control applications. Technically, the device belongs to Microchip (formerly Atmel) SMART ARM-based Flash MCU portfolio. The Cortex-M4 core integrates hardware divide, single-cycle MAC, and optional single-precision FPU, enabling closed-loop control algorithms and signal processing without an external coprocessor. The Flash-based program memory allows in-system reprogramming for field upgrades. Typical applications include industrial control and automation nodes, connectivity gateways and bridges, and consumer or building-control systems where a 120 MHz MCU with floating point capability reduces time-to-market. The 9x9 mm TFBGA footprint suits space-constrained, two-sided PCB layouts. Design consideration: BGA packages require controlled-impedance PCB fabrication, X-ray inspection capability for rework, and via-in-pad or dog-bone fanout routing on the 0.8 mm ball pitch typical of this package class. This page synthesizes distributor pricing, verified drop-in alternatives within the SAM4E/SAM4S families, and practical design notes not found in the manufacturer datasheet.

USD $8,45 Em estoque
ATSAM4E8CA-CUR - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip
ATSAM4E8CA-CUR

ATSAM4E8CA-CUR - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip

The Microchip Technology ATSAM4E8CA-CUR is a 32-bit ARM Cortex-M4 flash microcontroller from the SAM4E family, running at up to 120 MHz with 512 KB (512K x 8) of embedded Flash memory, housed in a 100-ball TFBGA (9 x 9 mm) package supplied on tape and reel. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the top of the embedded-processing hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. The SAM4E series belongs to Microchip's SMART ARM-based Flash MCU portfolio, which consolidates the former Atmel SAM product line under the Microchip brand. Key features of the ATSAM4E8CA-CUR include the ARM Cortex-M4 core with a hardware floating point unit (FPU), enabling single-cycle MAC and DSP instructions, and a high data bandwidth bus architecture per the manufacturer's product page. The 512 KB Flash array supports in-system programming, and the 100-TFBGA footprint packs extensive I/O into a 9 x 9 mm ball grid array suitable for two-layer ball-out routing. Technically, the SAM4E8C integrates the Cortex-M4 with the SAM4E peripheral set, which the manufacturer targets at connectivity-oriented embedded designs; the -CU ordering code denotes the TFBGA-100 package with industrial temperature ordering, delivered in tape-and-reel packing for automated pick-and-place assembly. Supply voltage references for this family are listed as 1.2V (core) / 3.3V (I/O) in distributor specification data. Typical applications include industrial networking nodes, embedded control systems, data-acquisition and logging equipment, and connected devices where the combination of 120 MHz DSP-capable processing, 512 KB Flash, and compact BGA packaging fits space-constrained PCBs. A key design consideration is that TFBGA packages require controlled-impedance, fine-pitch PCB fabrication; verify your board house supports the 0.8 mm ball pitch footprint and plan power distribution and decoupling per the manufacturer datasheet before layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3,24 Em estoque
ATSAM4E8CB-CN - Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4E8CB-CN

ATSAM4E8CB-CN - Cortex-M4 MCU 120MHz 512KB Flash | Microchip

The Microchip Technology ATSAM4E8CB-CN is a 32-bit ARM Cortex-M4 microcontroller with floating point unit (FPU), running at up to 120 MHz, integrating 512KB of Flash memory and up to 128KB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. A microcontroller unit (MCU) is a single-chip computer that combines a processor core, memory, and peripherals on one die. Within the semiconductor hierarchy, the SAM4E8C belongs to the ARM Cortex-M4-based flash MCU family, positioned above simple 8-bit MCUs (such as PIC16 devices) and within the broader class of embedded processors and power-management-oriented system-on-chip devices. The ARM Cortex-M4 core provides a 3-stage pipeline, single-cycle DSP instructions, and a hardware FPU. Key features include the 120 MHz maximum operating frequency with 2KB branch cache for zero-wait-state flash execution bandwidth, a high data bandwidth bus architecture, single-precision floating point acceleration, and extended temperature operation indicated by the -CN temperature suffix and the TFBGA GREEN extended-temp ordering code reported by distributors. The SAM4E family also integrates a rich peripheral set for connectivity, analog measurement, and advanced timing control. Architecturally, the device pairs the Cortex-M4 with an ARM AMBA high-bandwidth bus matrix, allowing the core, DMA channels, and peripherals to operate concurrently. The 2KB cache reduces effective flash wait states at 120 MHz, sustaining near-zero-wait-state performance for real-time control loops such as motor control and digital power conversion. Typical applications include industrial automation and motor control, consumer and embedded systems requiring a 32-bit upgrade path, and connectivity gateways using the family's advanced communication peripherals. Design consideration: verify Flash density against family variants before layout reuse - the same 100-ball TFBGA footprint serves both the 512KB ATSAM4E8C and the 1024KB ATSAM4E16C, enabling firmware-size headroom migration without PCB changes. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6,45 Em estoque
ATSAM4E8CB-CNR - 120MHz Cortex-M4 MCU 512KB | Microchip
ATSAM4E8CB-CNR

ATSAM4E8CB-CNR - 120MHz Cortex-M4 MCU 512KB | Microchip

The Microchip Technology ATSAM4E8CB-CNR is a 32-bit ARM Cortex-M4 microcontroller with floating point unit, running at up to 120 MHz, with 512 KB of embedded Flash memory, housed in a 100-ball TFBGA (9x9 mm) package for extended temperature operation. A microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals on one die, forming the lowest layer of the embedded systems hierarchy: MCU -> embedded processor -> system-on-chip. The SAM4E series belongs to Microchip (formerly Atmel) SMART ARM-based flash MCU family, positioned for connectivity-rich industrial and consumer applications. Key features of the ATSAM4E8CB-CNR include the Cortex-M4 core with hardware FPU for single-precision math, a 2 KB cache that sustains high data bandwidth from Flash, and a rich peripheral set highlighted by an integrated 10/100 Mbps Ethernet MAC with IEEE 1588 precision time protocol support, enabling single-chip networked nodes without external MAC devices. Architecturally, the SAM4E series combines the 120 MHz Cortex-M4 with multi-layer bus matrix (HSMCI, EBI/SMC external bus interface) for parallel data throughput, plus DMA-driven peripherals that offload the CPU. The flash accelerator and cache structure minimize wait states, allowing deterministic real-time execution. Atmel-11157 is the family datasheet covering SAM4E16E/SAM4E8E/SAM4E16C/SAM4E8C devices including the ATSAM4E8C. Typical applications include industrial Ethernet-connected nodes (gateways, sensors with network interfaces), building automation controllers, consumer appliances with connectivity, and motor control systems that benefit from the FPU and 120 MHz performance. Design consideration: the 100-TFBGA (9x9 mm, 0.8 mm ball pitch) requires controlled-impedance PCB fabrication and X-ray inspection capability; confirm Ethernet magnetics pairing and supply sequencing against the family datasheet before layout. This page synthesizes distributor availability data, family datasheet references, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $6,20 Em estoque
ATSAM4E8EA-AU - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAM4E8EA-AU

ATSAM4E8EA-AU - 120MHz Cortex-M4 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM4E8EA-AU is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 120 MHz with 512 KB (512K x 8) of embedded Flash memory, 2 KB instruction cache, and a 144-pin LQFP (20 x 20 mm) surface-mount package. It integrates a Floating Point Unit (FPU), DSP instructions, and a Memory Protection Unit (MPU), making it a high-performance embedded controller for connectivity-rich industrial designs. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals into one chip, forming the lowest tier of the embedded processing hierarchy that spans from MCUs up to application processors and SoCs. The SAM4E family belongs to Microchip (formerly Atmel) SMART ARM-based MCU portfolio, positioned for applications that need both compute performance and rich communication peripherals. Key features of the ATSAM4E8EA-AU include the ARM Cortex-M4 core with Thumb-2 instruction set, DSP and single-cycle MAC instructions for signal processing, an FPU for efficient floating-point math, and a 2 KB cache that sustains near-zero-wait-state execution at 120 MHz. Peripheral richness includes Ethernet MAC with IEEE 1588 support, dual CAN controllers, USB device port, multiple USART/SPI/TWI serial channels, a 12-bit ADC with 2 MspS conversion capability, PWM channels, and an on-chip temperature sensor, enabling industrial networked designs with a single IC. Architecturally, the device uses a high data bandwidth multi-layer bus matrix connecting the Cortex-M4 core to Flash, SRAM, and DMA channels, allowing peripherals to transfer data without CPU intervention. The Flash accelerator and cache mitigate flash wait-state penalties at 120 MHz operation. Green industrial-grade (TEMPMRL) qualification supports extended industrial ambient temperatures. Typical applications include industrial automation gateways and PLC I/O modules using the Ethernet and dual CAN interfaces, motor control and power conversion leveraging the FPU and PWM peripherals, and embedded networking equipment, POS terminals, and building automation nodes requiring USB and Ethernet connectivity. When designing with this MCU, budget Flash wait states and use the cache-friendly code layout, and decouple all VDDIO/VDDCORE supply domains per the manufacturer datasheet layout guidance. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-20.

USD $10,98 Em estoque
ATSAM4E8EA-AUR - 120MHz ARM Cortex-M4 MCU 512KB | Microchip
ATSAM4E8EA-AUR

ATSAM4E8EA-AUR - 120MHz ARM Cortex-M4 MCU 512KB | Microchip

The Microchip Technology ATSAM4E8EA-AUR is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 120 MHz with 512 KB (512K x 8) embedded flash and 128 KB SRAM, housed in a 144-pin LQFP (20 x 20 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest level of the embedded systems hierarchy: MCU -> embedded processor -> computing system. The SAM4E family belongs to Microchip's (formerly Atmel) SMART ARM-based MCU portfolio, targeting industrial connectivity applications that require both control performance and rich connectivity. Key features of the ATSAM4E8EA-AUR include the ARM Cortex-M4 core with a 2 KB cache, a hardware Floating Point Unit (FPU), DSP instructions, Thumb-2 instruction set support, and a Memory Protection Unit (MPU). The high data bandwidth architecture enables deterministic real-time execution while the FPU accelerates control algorithms such as PID loops and digital filtering. Technical depth: the Cortex-M4 core with 2 Kbytes cache reduces flash wait-state penalties at 120 MHz operation, while the MPU supports functional-safety-oriented software partitioning. Embedded flash allows in-field firmware updates without external memory. Typical applications include industrial automation, building and factory control, gateways and connectivity nodes, and motor control systems that leverage the DSP and FPU capability of the Cortex-M4 core. Design consideration: verify supply voltage, peripheral set, and I/O configuration against the official SAM4E datasheet before layout, and confirm the 144-LQFP (20x20) footprint dimensions against the land pattern data. This page synthesizes distributor pricing, stock status, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

USD $7,45 Em estoque
ATSAM4E8EA-CU - Cortex-M4 120MHz 512KB MCU | Microchip
ATSAM4E8EA-CU

ATSAM4E8EA-CU - Cortex-M4 120MHz 512KB MCU | Microchip

The Microchip ATSAM4E8EA-CU is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 120 MHz, with 512KB of embedded Flash memory, a 2KB instruction cache, and a floating point unit (FPU), housed in a 144-ball LFBGA package measuring 10x10 mm. A microcontroller (MCU) is a single-chip computing device that integrates a processor core, program memory, data memory, and peripherals on one die, forming the lowest level of the embedded-system hierarchy (embedded system -> MCU -> CPU core). The SAM4E series belongs to Microchip's SMART ARM-based flash MCU family, positioned for high-performance industrial and connectivity applications where 32-bit processing and hardware math acceleration are required. Key features of the ATSAM4E8EA-CU include the ARM Cortex-M4 core with DSP instructions and Thumb-2 instruction set, a Memory Protection Unit (MPU) for robust software partitioning, a 2KB cache that improves execution efficiency from Flash, and a high data bandwidth bus architecture. The 512KB (512K x 8) Flash accommodates large application images including RTOS stacks, communication protocol stacks, and OTA updatable firmware. The device operates from a 1.2 V core supply with 3.3 V I/O, and is supplied in industrial temperature grade, lead-free green LFBGA packaging. The fine-pitch ball grid array saves PCB area compared with LQFP alternatives, which matters in dense multi-board industrial designs. The built-in FPU executes single-precision floating point in hardware, removing software emulation overhead in control loops and signal processing. Typical applications include industrial automation controllers, motor control, IoT gateways, and connected sensing nodes where the Cortex-M4 performance class and Flash capacity fit control and communication duties simultaneously. Design consideration: LFBGA packages require controlled-impedance PCB fabrication with fine-pitch assembly; confirm your CMOS/PCB process supports ball pitch before layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,64 Em estoque
ATSAM4E8EB-AN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAM4E8EB-AN

ATSAM4E8EB-AN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM4E8EB-AN is a 32-bit ARM Cortex-M4 flash microcontroller from the Atmel | SMART SAM4E series, running at up to 120 MHz with 512 KB (512K x 8) of embedded Flash and 128 KB of SRAM, housed in a 144-pin LQFP (20 x 20 mm) surface-mount package. It includes a hardware floating point unit (FPU) for efficient single-precision math. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals into one chip, forming the heart of an embedded system. Within the MCU hierarchy, the SAM4E family sits in the high-performance 32-bit segment, above 8-bit AVR parts and below application processors, targeting industrial and connectivity-driven designs. Key features include the 120 MHz Cortex-M4 core with FPU, 2 KB of cache memory for predictable Flash execution, 512 KB of program Flash, and a rich peripheral set highlighted by an integrated 10/100 Ethernet MAC for networked nodes. Advanced connectivity peripherals reduce external component count and BOM cost in communication-centric products. Technically, the SAM4E architecture pairs the Cortex-M4 pipeline with a multi-layer bus matrix and 2 KB cache, sustaining near-zero-wait-state execution and deterministic interrupt latency. The on-chip Ethernet MAC with DMA offloads frame handling from the CPU, while serial peripherals (USART, SPI, I2C) and timers support industrial protocols and control loops. Extended-temperature, green (halogen-free, RoHS-oriented) packaging supports harsh industrial environments. Typical applications include industrial automation gateways and networked sensor nodes using the 10/100 Ethernet MAC, building automation and HVAC controllers, and test/measurement or data-logging systems that need the FPU for signal processing at 120 MHz. For design, budget the 512 KB Flash and 128 KB SRAM early - the cache mitigates but does not eliminate wait states, and Ethernet applications should reserve SRAM for DMA descriptors and frame buffers. Verify pin multiplexing on the 144-LQFP before finalizing the PCB, since many pins serve multiple peripheral functions. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-20.

USD $9,60 Em estoque
ATSAM4E8EB-ANR - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAM4E8EB-ANR

ATSAM4E8EB-ANR - 120MHz Cortex-M4 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM4E8EB-ANR is a 32-bit ARM Cortex-M4 flash microcontroller in the SAM4E series, running at 120 MHz with 512 KB of embedded flash memory and 128 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) surface-mount package rated for -40C to +105C operation. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the basis of embedded systems. The SAM4E family sits within Microchip's SMART ARM-based MCU portfolio: Cortex-M4 core -> 32-bit microcontroller -> embedded processing. The -B suffix denotes Revision B silicon, which Microchip recommends for both prototypes and new production designs. Key features of the ATSAM4E8EB-ANR include the ARM Cortex-M4 core with an integrated floating point unit (FPU), which accelerates DSP and math-intensive firmware; a high data bandwidth bus architecture; 512 KB (512K x 8) of flash for program storage; and 128 KB of SRAM for data buffers and stack. The extended industrial temperature grade (-40C to +105C) supports harsh environments. Architecturally, the SAM4E8E targets applications needing both processing throughput and rich connectivity, with a multi-layer bus matrix that lets DMA, Ethernet-class peripherals, and the core operate concurrently with minimal contention. The 120 MHz clock enables single-cycle flash access with prefetch buffering to keep pipeline stalls low. Typical applications include industrial automation controllers, networking and communication equipment, and embedded systems requiring deterministic floating point processing such as motor control and sensing nodes. When designing with this device, verify that your supply chain references the Revision B silicon (-B suffix), since Microchip recommends Revision B for new designs and production, while earlier steppings may differ errata-wise. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, adding sourcing and selection value beyond raw specification tables.

USD $6,45 Em estoque
ATSAM4E8EB-CN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAM4E8EB-CN

ATSAM4E8EB-CN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM4E8EB-CN is a 32-bit ARM Cortex-M4 flash microcontroller with integrated FPU, running at 120 MHz, with 512KB of embedded Flash and a 144-ball LFBGA (10x10 mm) package. A microcontroller unit (MCU) is a single-chip embedded computer that integrates a processor core, memory, and programmable peripherals on one die, sitting within the broader hierarchy of semiconductor devices: Cortex-M4 core -> ARM 32-bit MCU -> microcontroller -> embedded processor. The SAM4E series belongs to Atmel (now Microchip) SMART ARM-based Flash MCU family, designed for connectivity-centric embedded systems. Key features include the high-performance Cortex-M4 core with hardware floating point unit (FPU), 2KB instruction cache for improved flash execution efficiency, and 128KB of SRAM for data buffering. The SAM4E family integrates advanced connectivity peripherals, most notably a 10/100 Ethernet MAC, alongside UART, USART, SPI, I2C (TWI) and CAN interfaces, plus a 12-bit ADC and PWM channels for control tasks. The device operates from 1.2V, 2.5V, and 3.3V supply domains per the Arrow listing, with extended temperature support per Mouser data. Technically, the SAM4E achieves 1.25 DMIPS/MHz from the Cortex-M4 pipeline, and the 2KB cache allows zero-wait-state execution from Flash at 120 MHz, mitigating flash access latency. The Ethernet MAC with DMA offloads network stack processing from the CPU, making it well suited for connected industrial nodes. Typical applications include industrial Ethernet gateways, building automation and HVAC controllers, networked sensor nodes, and motor-control systems where the FPU accelerates control-loop math. Design consideration: BGA packages require controlled-impedance PCB stackups and X-ray inspection capability; plan the fanout strategy early and consider the LQFP-packaged SAM4E8EA sibling if BGA assembly is not available. This page synthesizes distributor availability, drop-in family alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet. Pricing shown as of 2026-09-20.

USD $8,51 Em estoque
ATSAM4LC2AA-AU - 48MHz Cortex-M4 MCU, 128KB Flash | Microchip
ATSAM4LC2AA-AU

ATSAM4LC2AA-AU - 48MHz Cortex-M4 MCU, 128KB Flash | Microchip

The Microchip Technology (Atmel) ATSAM4LC2AA-AU is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 48 MHz with 128KB of embedded flash memory, housed in a 48-pin TQFP (7x7 mm) package. It delivers class-leading low-power operation: 90 uA/MHz in active mode, 1.5 uA in sleep mode, and wake-up times down to 1.5 us. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, forming the lowest layer of the embedded systems hierarchy (embedded IC -> microcontroller -> ARM Cortex-M MCU -> SAM4L family). The SAM4L series belongs to Microchip's ARM-based flash MCU portfolio, designed for ultra-low-power battery-operated and energy-harvesting systems. Key features include the 32-bit ARM Cortex-M4 core with 48 MHz maximum frequency, 128KB (128K x 8) flash memory, an integrated segment LCD controller, hardware cryptography accelerators, and USB device/host capability. These features allow the SAM4LC2 to drive displays, secure data, and connect to USB hosts without external components, reducing BOM cost in portable products. Technically, the device combines the Cortex-M4 processing pipeline with Microchip's low-power peripheral bus architecture and a flexible event system that lets peripherals communicate without CPU intervention. Multiple sleep modes with rapid wake-up, plus dynamic clock gating, make it suitable for duty-cycled applications where average current, not peak performance, dominates battery life. Supply voltage is 3.3 V, typical of industrial and portable logic levels. Typical applications include battery-powered metering and data loggers, segment-LCD human-machine interfaces, portable medical and wellness devices, and USB-connected sensor nodes. The LCD controller plus low sleep current directly benefits instruments that must show readings continuously on a coin-cell or primary battery. When designing with this MCU, budget power by exploiting sleep modes and the event system; wake-up from sleep in as little as 1.5 us allows frequent duty cycling without latency penalties. Verify flash and SRAM sizing against code footprint before committing, since the 128KB flash tier is the smallest in parts of this pinout family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4,05 Em estoque