Microcontroladores

Produtos (18756)

PIC24FJ128GA705-E/PT - 16-bit 32MHz MCU 128KB Flash | Microchip
PIC24FJ128GA705-E/PT

PIC24FJ128GA705-E/PT - 16-bit 32MHz MCU 128KB Flash | Microchip

The Microchip Technology PIC24FJ128GA705-E/PT is a 16-bit PIC24F microcontroller featuring 128KB of ECC Flash, 16KB of RAM, and eXtreme Low Power (XLP) operation, housed in a 48-pin TQFP (7x7 mm) package. It runs at 32 MHz (16 MIPS) with a 16-bit data path and integrates a 12-bit ADC at 200 ksps with up to 14 analog inputs, 3 analog comparators, a Charge Time Measurement Unit (CTMU) for touch applications, and a DMA engine for offloading CPU data movement. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (typically Flash), volatile working memory (RAM), and a rich set of on-chip peripherals. In the broader component taxonomy, the PIC24FJ family sits under 16-bit microcontrollers -> microcontrollers -> embedded controllers -> integrated circuits. The PIC24F 'J' series specifically targets ultra-low-power applications, where sleep current and active efficiency dominate the bill of materials for battery-powered IoT, medical, and industrial nodes. Key features of the PIC24FJ128GA705 include hardware ECC on Flash for robust code execution, integrated DMA to free the core for control-loop work, a segmented LCD driver option on the larger pin-count variants, and rich connectivity peripherals (UART, SPI, I2C). The 'GA' family adds graphics and LCD-friendly peripherals while the '705' is the highest-memory 48-pin member. The '-E' suffix indicates the -40C to +125C extended operating temperature range suitable for industrial environments. Typical applications include eXtreme Low Power wireless sensor nodes, capacitive touch user interfaces using CTMU, USB device/host or CAN connectivity via PPS remapping, low-power industrial control with LCD segment displays, and battery-backed metering or remote telemetry. The 48-pin TQFP exposes more I/O than 28/44-pin siblings, supporting parallel bus or dual LCD segment panels. When designing with this MCU, allocate the regulator budget for XLP sleep currents in the single-digit uA range and verify the CTMU timing capacitor selection for the target touch electrode RC. The Peripheral Pin Select (PPS) feature allows flexible remapping but requires careful review of the device pinout table to avoid electrical conflicts on the same physical pin.

Cotação Contato
PIC24FJ128GA705-I/M4 - 16-bit 32MHz MCU 128KB Flash UQFN-48 | Microchip
PIC24FJ128GA705-I/M4

PIC24FJ128GA705-I/M4 - 16-bit 32MHz MCU 128KB Flash UQFN-48 | Microchip

The Microchip Technology PIC24FJ128GA705-I/M4 is a 16-bit PIC24F microcontroller delivering 32 MIPS performance from a 32 MHz CPU core, integrating 128 KB of ECC Flash (43K x 24 words) and 16 KB of SRAM in a compact 48-pin UQFN (6x6 mm) package with exposed pad. It is part of the eXtreme Low Power family targeting portable, battery-powered, and IoT edge applications where energy efficiency and integration matter most. What is a PIC24F microcontroller? A PIC24F microcontroller is a 16-bit RISC MCU from Microchip Technology built on a modified Harvard architecture with 16-bit instructions and 24-bit-wide Flash storage words. It sits in the hierarchy as: MCU -> microcontroller -> 16-bit MCU -> PIC24F -> PIC24FJ GA family, optimized for low-power operation with peripherals like LCD drivers, CTMU touch sensing, and 12-bit ADCs. Key features of the PIC24FJ128GA705-I/M4 include 128 KB ECC Flash, 16 KB RAM, 12-bit ADC at 200 ksps with up to 14 analog inputs, three analog comparators, CTMU for capacitive touch, and a hardware DMA controller for low-CPU-overhead data movement. Multiple low-power modes (Sleep, Idle, Doze) and a 32 MHz internal oscillator reduce external component count. The device uses a 16-bit modified Harvard CPU with single-cycle multiply and hardware divide, backed by a 24-bit instruction word width that simplifies firmware development in MPLAB X IDE. The UQFN-48 package with exposed pad (EP) provides a thermal pad for heat spreading and a small PCB footprint, ideal for space-constrained designs. Typical applications include low-power IoT sensor nodes, portable medical devices, industrial control panels with LCD displays, capacitive touch user interfaces, home appliances with segmented displays, and battery-powered data loggers. The integrated CTMU eliminates the need for external touch-sense ICs in HMI designs. When designing with this MCU, follow Microchip's AN1416 layout guidelines for UQFN packages: provide a continuous ground plane beneath the exposed pad, use thermal vias, and follow recommended decoupling (100 nF ceramic close to each VDD/VSS pair). Use MPLAB XC16 compiler with appropriate optimization level for lowest active current. This page synthesizes distributor pricing, drop-in same-package alternatives from the same PIC24FJ GA family, and practical design notes not found in the manufacturer datasheet, giving embedded engineers a faster path to schematic capture and BOM risk reduction.

Cotação Contato
PIC24FJ128GA705-I/PT - 16-bit 32MHz MCU 128KB Flash | Microchip
PIC24FJ128GA705-I/PT

PIC24FJ128GA705-I/PT - 16-bit 32MHz MCU 128KB Flash | Microchip

The Microchip Technology PIC24FJ128GA705-I/PT is a 16-bit PIC24F microcontroller featuring 128KB of ECC Flash, 16KB of RAM, and eXtreme Low Power (XLP) operation, housed in a 48-pin TQFP (PT) package measuring 7x7 mm. It operates at up to 32 MHz with a 16-bit data path, integrates a 12-bit ADC at 200 ksps with up to 14 analog inputs, three comparators, and a CTMU (Charge Time Measurement Unit) for touch and capacitance-sensitive applications. The supply voltage range is 2.0V to 3.6V across an industrial -40C to +85C temperature window. A 16-bit microcontroller (MCU) is a class of embedded processor that executes arithmetic on 16-bit-wide data in a single instruction, doubling the throughput of legacy 8-bit cores while remaining cheaper and lower-power than 32-bit ARM Cortex-M parts. Within the Microchip hierarchy, the PIC24F sits below the PIC24H/dsPIC33 for DSP-heavy work but above the PIC16 family for general-purpose designs that demand USB, LCD, or larger memory. The PIC24FJ128GA705 specifically targets battery-powered IoT, portable medical, and industrial control segments where code density, peripheral count, and standby current are all critical. Key features include 128KB ECC Flash organized as 43K x 24 words, 16KB SRAM, DMA for peripheral-to-memory transfers, RTCC with calendar mode, up to five 16-bit timers, and configurable logic cells (CLC) for hardware state-machine glue. The integrated LCD driver can directly drive up to 256 segments. The device offers multiple low-power sleep modes drawing down to a few hundred nanoamperes, enabling coin-cell or energy-harvesting designs. Hardware cryptographic acceleration, unique device ID, and JTAG/ICSP programming are all included. Typical applications include portable medical monitoring (glucose meters, pulse oximeters), IoT sensor nodes with LCD readout, home appliances, motor-control front-ends, capacitive touch user interfaces, and battery-powered industrial instrumentation. The CTMU simplifies water-level and proximity sensing, while the LCD driver eliminates an external display controller. The 48-pin TQFP gives 40 general-purpose I/O pins, allowing direct connection to keypads, character displays, and analog sensors without external muxing. When designing with this MCU, plan decoupling for the analog and digital rails separately, place the 32.768 kHz crystal within a few millimeters of the SOSC pins, and consult the device's family datasheet for code examples on CTMU touch and deep-sleep wake-up. Note that the silicon revision affects errata, so always match firmware to the chip's revision ID.

Cotação Contato
PIC24FJ128GA705T-I/M4 - 128KB 16-bit MCU 48-UQFN | Microchip
PIC24FJ128GA705T-I/M4

PIC24FJ128GA705T-I/M4 - 128KB 16-bit MCU 48-UQFN | Microchip

The Microchip PIC24FJ128GA705T-I/M4 is a 16-bit PIC24F microcontroller featuring 128KB of ECC Flash (43K x 24) and 16KB of RAM, operating at up to 32 MHz (16 MIPS) in a 48-pin UQFN (6x6 mm) package with exposed pad. The "T" suffix denotes tape-and-reel packaging, while "I" indicates the industrial -40C to +85C operating temperature range. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and integrated peripherals such as ADC, timers, and communication interfaces. Within the broader taxonomy, this part belongs to the PIC24F family of Microchip 16-bit microcontrollers, which sits between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices in the Microchip portfolio. The "FJ" sub-family specifically emphasizes eXtreme Low Power (XLP) operation with sleep currents in the nanoamp range, making it suited to battery-powered and energy-harvesting applications. Key features include a 12-bit ADC at 200 ksps with up to 14 analog input channels, three analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, hardware DMA, a CRC engine, and multiple serial interfaces including UART, SPI, and I2C. The integrated 8 MHz Fast RC oscillator with PLL can be boosted up to 96 MHz for peripheral clocking while the core runs at 16 MIPS from 32 MHz. ECC Flash provides single-bit error correction and multi-bit error detection for code-memory reliability in safety-critical applications. The architecture uses a modified Harvard design with separate program and data buses, allowing simultaneous instruction fetch with data access. The 17-bit x 17-bit hardware multiplier and 32-bit ALU accelerate DSP-style operations including MAC (multiply-accumulate), supporting applications such as digital filtering and audio processing. The instruction set is optimized for C-compiled code while retaining assembler efficiency for time-critical routines. Typical applications include capacitive touch user interfaces, low-power IoT sensor nodes, portable medical monitors, USB human-interface devices, smart energy metering, and industrial HMI panels. The combination of XLP sleep modes, CTMU touch hardware, and 12-bit ADC makes it especially well suited to battery-powered touch-button products and remote-control units. When designing with this part, plan the pinout against the 48-UQFN land pattern and provide a solid ground plane beneath the exposed thermal pad for proper thermal and electrical performance. Microchip's MPLAB X IDE with the XC16 compiler and MPLAB Code Configurator (MCC) supports this device out of the box, and the PIC24FJ128GA705 family is supported by both legacy and modern Peripheral Libraries. This page synthesizes real-time distributor pricing, drop-in same-package alternatives from the same Microchip PIC24F family, and practical design notes derived from Microchip application notes and reference designs not found in the manufacturer datasheet.

Cotação Contato
PIC24FJ128GA705T-I/PT - 16-bit MCU 128KB Flash 48-TQFP
PIC24FJ128GA705T-I/PT

PIC24FJ128GA705T-I/PT - 16-bit MCU 128KB Flash 48-TQFP

The Microchip Technology PIC24FJ128GA705T-I/PT is a 16-bit PIC24F microcontroller featuring 128 KB ECC Flash (43K x 24), 16 KB RAM, and a 32 MHz CPU core, housed in a 48-pin TQFP (7x7 mm) package. Tape-and-reel packaging is indicated by the "/PT" suffix and "T" designator, making this variant optimized for high-volume surface-mount assembly. A PIC24F microcontroller belongs to the broader 16-bit MCU family that bridges the gap between 8-bit PIC16/PIC18 architectures and 32-bit Cortex-M devices. It delivers higher computational throughput than 8-bit MCUs while retaining the deterministic interrupt response and simple peripheral set that PIC microcontrollers are known for. Within the system hierarchy, the PIC24FJ128GA705T-I/PT sits in the "low-power general-purpose MCU" category, sharing a modified Harvard architecture with dedicated program (Flash) and data (RAM) buses. Key features include an integrated 12-bit ADC sampling up to 200 ksps with up to 14 analog inputs, three analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, and a Direct Memory Access (DMA) controller for CPU-offload data movement. The device supports eXtreme Low Power (XLP) operating modes — Run, Idle, and Sleep — with multiple wake-up sources, making it suitable for battery-powered designs. Programmable peripherals include UART, SPI, I2C, and timer/capture/compare modules. Architecturally, the PIC24FJ128GA705 family is built on a modified Harvard core with a 16-bit instruction word and 24-bit instruction width. ECC-protected Flash and parity-protected RAM improve robustness in electrically noisy environments. The integrated DMA engine moves data between peripherals and RAM without CPU intervention, freeing the core for application logic and reducing active-mode current draw. Typical applications include human-machine interfaces (HMI) with capacitive touch, low-power wireless sensor nodes, portable medical monitoring, consumer appliances, and industrial control panels. The CTMU and DMA combination is particularly well-suited for touch keypads and slider implementations. A key design consideration is matching the 48-pin TQFP footprint and pinout when migrating within the family; the PIC24FJ128GA705 family also ships in 28-pin and 44-pin variants, so PCB layouts are not interchangeable across pin counts. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
PIC24FJ128GB106-I/PT - 16-bit 32MHz USB OTG MCU 128KB Flash | Microchip
PIC24FJ128GB106-I/PT

PIC24FJ128GB106-I/PT - 16-bit 32MHz USB OTG MCU 128KB Flash | Microchip

The Microchip Technology PIC24FJ128GB106-I/PT is a 16-bit PIC24F microcontroller with USB On-The-Go (OTG) support, 128 KB Flash program memory (43K x 24 words), 16 KB RAM, and a 32 MHz / 16 MIPS core, housed in a 64-pin TQFP (10x10 mm) package. The part carries industrial temperature grade (-40C to +85C) and integrates a hardware crypto engine plus a true random number generator for secure USB applications. It belongs to the eXtreme Low Power (XLP) family, drawing less than 100 nA in deep-sleep standby while keeping a USB transceiver always available for wake events. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a mix of peripherals (timers, communication blocks, analog blocks) on one die. The PIC24F family sits in the 16-bit MCU hierarchy between 8-bit PIC MCUs and 32-bit Cortex-M devices, offering higher throughput than 8-bit parts while keeping power consumption low. The PIC24FJ128GB106 specifically targets USB-connected embedded designs that need more headroom than 8-bit MCUs but do not require a digital signal processor. Key features include 128 KB Flash, 16 KB RAM, hardware crypto engine, true random number generator, USB 2.0 OTG with integrated transceiver, three I2C, three SPI, four UART channels, 23 timers, a 10-bit 500 ksps ADC with up to 16 channels, and a CTMU for capacitive touch. XLP technology supports deep sleep with RTCC and a deep-sleep wake source, enabling battery-powered designs that must run for years on a single cell. Peripheral Pin Select remaps digital functions to physical I/O without rewiring, freeing layout from fixed peripheral pin assignments. The PIC24FJ128GB106 uses a 16-bit modified Harvard architecture with a 24-bit instruction word and a 16-bit data path, delivering 16 MIPS at 32 MHz. The integrated USB OTG controller with on-chip full-speed transceiver eliminates external PHY complexity, while PPS and the rich peripheral set make this device well suited to human-interface, sensor hub, and connectivity applications where USB device or host roles are required. Typical applications include USB peripherals (HID, CDC, MSD), industrial data loggers, medical telemetry, e-metering, and battery-powered sensor nodes. The 64-pin TQFP variant is chosen when fewer than 50 GPIOs and 128 KB of code are sufficient, leaving room for cost-down versus the 80-pin GB108 or 100-pin GB110. When designing with this MCU, plan the I/O map using PPS before PCB layout and reserve the 16 KB RAM for USB class descriptors and packet buffers. Use the on-chip CTMU for cost-effective touch keys without dedicated hardware, and follow Microchip application notes for USB enumeration and OTG role swapping. This page synthesizes distributor pricing, drop-in compatible PIC24F alternatives, and practical design notes that go beyond the manufacturer datasheet summary, enabling fast BOM decisions for USB-enabled embedded designs.

Cotação Contato
PIC24FJ128GB106T-I/PT - 16-bit 32MHz USB OTG MCU, 128KB Flash | Microchip
PIC24FJ128GB106T-I/PT

PIC24FJ128GB106T-I/PT - 16-bit 32MHz USB OTG MCU, 128KB Flash | Microchip

The Microchip Technology PIC24FJ128GB106T-I/PT is a 16-bit RISC flash microcontroller in the PIC24F family, integrating USB On-The-Go (OTG) and operating at up to 32 MHz (16 MIPS) with 128 KB (43K x 24 words) of program flash and 16 KB of RAM, all housed in a 64-pin TQFP (10x10 mm) package. The T-suffix indicates tape-and-reel packaging while the /PT suffix indicates the 64-pin TQFP form factor. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC24F family sits between 8-bit PIC MCUs and dsPIC digital signal controllers, offering 16-bit data paths, modified Harvard architecture, and a wide peripheral set. USB OTG extends plain USB by allowing two OTG-capable devices to negotiate host or device roles and exchange data peer-to-peer without a PC, which is why MCUs with OTG are preferred for embedded peripherals such as data loggers, instrumentation, and point-of-sale terminals. Key features include 52 general-purpose I/O pins, three I2C, three SPI, four UART channels, 23 independent timers, and a real-time clock/calendar. The integrated USB 2.0 full-speed OTG controller adds a session request protocol (SRP) and host negotiation protocol (HNP) engine. The nanoWatt power management hardware provides multiple idle, sleep, and deep-sleep modes that drop the standby current below 100 nA, making the part attractive for battery-backed and energy-harvesting products. The PIC24FJ128GB106 architecture uses a 16-bit modified Harvard core with a 24-bit instruction word, allowing single-cycle fetches and deterministic interrupt response. Its CTMU (Charge Time Measurement Unit) supports touch sensing, capacitive proximity detection, and time-of-flight measurements without an external ADC. Two Analog Comparators and a 10-bit 1.1 Msps ADC with up to 16 input channels round out the analog subsystem. Typical applications include USB peripherals (HID-class devices, CDC virtual COM ports, mass storage), low-power wireless sensor nodes with USB charging, industrial data loggers, medical point-of-care instruments, and consumer audio accessories that stream PCM over USB. The combination of large RAM (16 KB), ample flash (128 KB), and OTG makes it well-suited to embedded hosts that read files from a USB flash drive and present them on a local display. Design consideration: the USB D+/D- traces require 90-ohm differential impedance, and VUSB needs a 100 nF plus 4.7 uF local bypass network per the USB specification. Place the 32 kHz primary oscillator crystal within 5 mm of the SOSCO/SOSCI pins to keep the RTCC accurate and the nanoWatt current low. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes that go beyond the manufacturer datasheet so you can evaluate, source, and qualify the PIC24FJ128GB106T-I/PT for production.

Cotação Contato
PIC24FJ128GB110-I/PF - 16-bit 32MHz USB OTG MCU 128KB Flash | Microchip
PIC24FJ128GB110-I/PF

PIC24FJ128GB110-I/PF - 16-bit 32MHz USB OTG MCU 128KB Flash | Microchip

The Microchip Technology PIC24FJ128GB110-I/PF is a 16-bit microcontroller from the PIC24F "GB2" family that integrates a full-speed USB On-The-Go (OTG) controller, a hardware crypto engine, and a true random number generator onto a single die. It provides 128KB of Flash program memory (43K x 24 words), 16KB of RAM, and runs at up to 32MHz (16 MIPS) from a 2.0V to 3.6V supply, all housed in a 100-pin TQFP (14x14 mm) package. The part carries the -I/PF industrial temperature suffix and is qualified for -40C to +85C operation. A 16-bit microcontroller (MCU) is a programmable processor that uses a 16-bit data path and instruction word, sitting in the hierarchy between 8-bit MCUs (typical in simple embedded control) and 32-bit MCUs (typical in application processors). Microchip's PIC24F family is built on a modified Harvard RISC architecture and is widely used for low-power connected embedded designs because of its eXtreme Low Power (XLP) technology, which achieves standby currents under 100 nA in the GB2 family. Key differentiating features include the integrated USB OTG transceiver (eliminates an external PHY), a parallel master port (PMP) for graphics or external memory, three I2C, three SPI, four UART channels, 23 independent timers, a 16-channel 10-bit ADC, and a CTMU peripheral for capacitive touch. The crypto engine accelerates AES, DES, and triple-DES, while the on-chip RNG supports secure key generation. This architecture matters for designers building battery-powered peripherals because the same die that runs the user application can host USB device/host/OTG stacks, sensor fusion, and crypto without external components. The combination of 16KB RAM and 128KB Flash is well matched to mid-tier USB stacks plus custom application code. Typical applications include USB HID peripherals, USB-to-UART bridges, secure token readers, low-power sensor hubs, industrial data loggers, and consumer medical devices that require isolated USB connectivity. When designing with this part, mind the 100-pin TQFP land pattern and ensure the USB DP/DM traces are routed as a 90 ohm differential pair with a clean ground reference; the on-chip PHY is not tolerant of impedance discontinuities. This page synthesizes distributor pricing tiers, drop-in same-package alternatives, and practical USB layout notes that go beyond the manufacturer datasheet.

Cotação Contato
PIC24FJ128GB110-I/PT - 16-bit 32MHz 128KB Flash USB OTG MCU | Microchip
PIC24FJ128GB110-I/PT

PIC24FJ128GB110-I/PT - 16-bit 32MHz 128KB Flash USB OTG MCU | Microchip

The Microchip Technology PIC24FJ128GB110-I/PT is a 16-bit 32 MHz flash microcontroller with 128 KB program memory and 16 KB SRAM, housed in a 100-pin TQFP package (12x12 mm). It integrates a full-speed USB On-The-Go (OTG) transceiver with integrated PHY, 84 I/O pins, a 12-bit ADC, three I2C, three SPI and four UART ports, plus 23 independent timers. The "I" temperature grade supports -40 C to +85 C industrial operation and the device uses Microchip's eXtreme Low Power (XLP) nanoWatt technology with under 100 nA standby current. According to the Microchip PIC24FJ128GB110 family datasheet, the device is built around a 16-bit modified Harvard PIC24F core delivering 16 MIPS at 32 MHz. A 16-bit PIC microcontroller is a member of the wider microcontroller (MCU) family, which itself sits inside the embedded processor and semiconductor hierarchy. PIC24F parts use a 16-bit instruction word and 24-bit instruction bus, providing higher code density and richer peripherals than 8-bit PIC16/PIC18 parts while remaining cheaper than 32-bit PIC32 devices. They bridge the gap between small 8-bit controllers and full 32-bit application processors, integrating digital peripherals, analog blocks, and on this part even a hardware crypto engine and RNG for security-sensitive IoT nodes. Key differentiating features include an integrated hardware crypto engine and random number generator (unique to the GB1 family), a real-time clock and calendar (RTCC) with dedicated 32 kHz oscillator, a 16-channel 12-bit 500 ksps ADC, and dual comparator modules. The device supports Microchip's Peripheral Pin Select (PPS) remapping for flexible I/O assignment, has 5 separate hardware PWM/OCP channels, and includes JTAG boundary-scan for board-level test access. Architecture-wise the PIC24FJ128GB110 uses a modified Harvard core with separate program flash (128 KB) and data SRAM (16 KB) buses, allowing simultaneous instruction fetch and data access. The integrated USB OTG controller and PHY remove the need for an external transceiver, and the hardware crypto accelerator offloads AES/SHA workloads from the CPU, making the part well-suited to secure tethered and untethered USB applications. Typical applications include USB peripherals and embedded hosts (medical instruments, data loggers, point-of-sale terminals), secure IoT edge nodes that benefit from hardware AES, industrial human-machine interfaces (HMIs), and battery-powered data acquisition systems using the XLP nanoWatt sleep modes. It is also commonly used in PIC24F USB learning kits and reference designs from Microchip. When designing with this part, allocate sufficient 5 V-tolerant pins for legacy interfaces, follow Microchip's USB hardware design guidelines for the 90-ohm differential pair (D+/D-) impedance control, and select the appropriate RTCC crystal load capacitance for accurate timekeeping. The device requires a 3.3 V supply and the integrated 2.5 V regulator must be properly bypassed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
PIC24FJ128GB110T-I/PT - 16-bit 128KB Flash USB OTG MCU | Microchip
PIC24FJ128GB110T-I/PT

PIC24FJ128GB110T-I/PT - 16-bit 128KB Flash USB OTG MCU | Microchip

The Microchip Technology PIC24FJ128GB110T-I/PT is a 16-bit RISC microcontroller from the PIC24F family, integrating 128KB of Flash program memory (43K x 24), 16KB of RAM, and a USB On-The-Go (OTG) full-speed controller in a 100-pin TQFP (PT) surface-mount package. The core executes up to 16 MIPS at 32 MHz, supporting 2.5V and 3.3V operation with nanoWatt power management for battery-aware designs. The device provides 84 general-purpose I/O pins, multiple timers, comparators, a 16-channel 10-bit ADC, and a real-time clock calendar. A 16-bit microcontroller (MCU) is a programmable processor with internal Flash, RAM, and peripherals integrated on a single die. Within the embedded taxonomy, the PIC24FJ family sits between 8-bit PIC16/PIC18 MCUs and 32-bit PIC32 ARM Cortex parts. The PIC24F line emphasizes low-power eXtreme Low Power (XLP) variants with the Harvard architecture, providing deterministic instruction cycles for real-time control. USB OTG enables the device to act as both USB host and peripheral without an external PHY, which is uncommon in this price/performance tier. Key features include an 8 MHz internal oscillator with 4x PLL (yielding 32 MHz core), 17-bit single-cycle hardware multiplier, 16-bit hardware divider, and C compiler-optimized instruction set. The CTMU module supports touch sensing, mTouch capacitive buttons, and time-of-flight measurement, while the PMP/EPSP modules drive parallel displays. Five 16-bit timers/counters, four UARTs, two SPI, and two I2C peripherals cover typical wired connectivity. The architecture combines modified Harvard separation of program and data buses with a 16-bit working register array, delivering up to 16 MIPS while drawing microamp sleep currents. The integrated USB OTG PHY supports full-speed (12 Mbps) host and device roles, plus low-speed (1.5 Mbps) device mode, with internal pull-up/pull-down resistors selectable by firmware. Typical applications include USB peripherals (HID, CDC, MSD), industrial control with capacitive touch HMIs, portable data loggers with RTC, embedded host products (USB flash drive readers, keyboards), and medical monitoring devices needing low sleep current. The wide 2.0V-3.6V supply range also supports battery-powered IoT sensor nodes. Design with this MCU by allocating a minimum 1 µF bulk decoupling capacitor on VDD and 100 nF on each AVDD pair; place the 32 kHz crystal within 1 cm of SOSCO/SOSCI to minimize RTC drift. USB D+/D- traces must be 90 ohm differential, length-matched within 2 mm, and routed over a continuous ground plane. The 'T' suffix indicates Tape & Reel packaging; the operating range is industrial -40C to +85C (I-grade). This page synthesizes distributor pricing, drop-in pin-compatible alternatives within the PIC24FJ family, and practical USB/PCB design notes not consolidated in the standalone Microchip datasheet.

Cotação Contato
PIC24FJ128GB202-E/MM - 16-bit XLP MCU, 128KB Flash, USB, Crypto | Microchip
PIC24FJ128GB202-E/MM

PIC24FJ128GB202-E/MM - 16-bit XLP MCU, 128KB Flash, USB, Crypto | Microchip

The Microchip Technology PIC24FJ128GB202-E/MM is a 16-bit microcontroller from the PIC24F eXtreme Low Power (XLP) family, integrating a hardware crypto engine, USB 2.0 full-speed device/host/OTG, and 128 KB of self-programmable Flash in a 28-pin 6x6 mm QFN-S package. It operates at up to 32 MHz MIPS core clock with 8 KB SRAM and is engineered for ultra-low-power embedded designs where both cryptographic acceleration and USB connectivity are required on the same die. A 16-bit microcontroller (MCU) is a programmable processor whose arithmetic logic unit, registers, and internal bus are 16 bits wide, balancing the 8-bit MCU's code density with the 32-bit MCU's throughput. PIC24F devices sit in Microchip's mid-range 16-bit portfolio between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts, sharing the same MPLAB X toolchain, XC16 compiler, and Harmony framework as the wider dsPIC/PIC24/PIC32 family. The "FJ" prefix denotes Flash program memory with the XLP sleep architecture, "GB" denotes integrated USB plus crypto, and "202" identifies the 28-pin pinout with 128 KB Flash. Key features of the PIC24FJ128GB202-E/MM include: 128 KB (43K x 24) Flash program memory with self-programming and live update, 8 KB SRAM, integrated hardware crypto engine supporting AES, DES, 3DES, SHA-1/SHA-256 and RNG, USB 2.0 FS device/host/OTG with on-chip transceiver and PHY, two I2C, two SPI, up to two UART, two comparators, a 10-bit ADC with up to 9 channels, 5-bit DAC, three 16-bit timers, RTCC with calendar, and a chargeable nanoWatt XLP deep-sleep mode drawing sub-µA currents. The on-chip 32 kHz crystal-less USB PLL and the CTMU touch-sensing peripheral reduce external BOM cost. The QFN-S (6x6 mm) package provides a thermally efficient exposed paddle suitable for hand-held and USB-powered devices. The PIC24FJ128GB202 architecture pairs a modified Harvard CPU with a 24-bit instruction word for compact code density, a single-cycle hardware multiplier, and a deterministic interrupt controller. The integrated crypto block offloads AES-128/192/256 and SHA operations from the core, so secure firmware updates, signed firmware boot, and TLS-style handshakes run in milliseconds rather than tens of milliseconds. The USB block shares DMA with the rest of the peripherals and supports device, host, and OTG roles, eliminating the need for an external PHY in most token, HID, CDC, and Mass Storage designs. Typical applications for this part include USB smart-card and authentication tokens, secure medical data loggers with USB charging/docking, encrypted industrial sensor hubs that stream over USB, low-power IoT edge nodes that need both USB firmware update and secure boot, e-metering and tamper-resistant metering devices, and battery-powered consumer accessories such as USB-C hearables and wearables. Designers choose the "E" temperature grade (-40C to +125C) for industrial and extended-temperature environments. A practical design tip: route the USB D+/D- pair as a 90-ohm differential microstrip with ground stitching vias on both sides, keep the 27-ohm series resistors within 4 mm of the IC, and place the VBUS bulk capacitor as close as possible to the VBUS pin to pass USB compliance and ESD tests. The QFN exposed paddle must be soldered to a continuous ground copper pour with thermal vias to meet the 1.5 W dissipation budget in enclosed industrial enclosures. This page synthesizes distributor pricing, same-package Microchip alternatives, and practical USB/crypto design notes not found in a single datasheet table.

Cotação Contato
PIC24FJ128GB202-E/SO - 16-bit MCU, 128KB Flash, USB, Crypto | Microchip
PIC24FJ128GB202-E/SO

PIC24FJ128GB202-E/SO - 16-bit MCU, 128KB Flash, USB, Crypto | Microchip

The Microchip Technology PIC24FJ128GB202-E/SO is a 16-bit RISC microcontroller from the PIC24F XLP family, featuring an integrated crypto engine, key storage, and random number generator for secure low-power applications. It delivers up to 32 MIPS performance from a 128 KB Flash program memory (43K x 24 words) and 8 KB SRAM, packaged in a 28-pin SOIC (SO) wide-body outline suitable for automotive-grade embedded designs operating from a 3.3 V supply. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of on-chip peripherals such as timers, communication interfaces, and analog blocks. The PIC24F family sits within Microchip's broader product hierarchy: PIC24F sub-family -> PIC24 16-bit DSC/MCU family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. XLP (eXtreme Low Power) technology further positions this MCU for battery-powered secure nodes. Key features include a full-speed USB 2.0 On-The-Go (OTG) transceiver, a hardware crypto engine with AES/DES support, a true Random Number Generator (RNG), and Microchip's eXtreme Low Power nanoWatt XLP technology for sleep currents measured in microamps. The device also integrates a 10-bit 1.1 Msps ADC, multiple PWM/SCCP/ECCP timer blocks, and standard serial interfaces including I2C, SPI, and UART. The 128 KB Flash is partitioned for boot/secure storage use cases typical of secure IoT endpoints. Architecture-wise, the PIC24FJ128GB202 uses a 16-bit modified Harvard core with a single-cycle hardware multiplier and 16 x 16-bit working register file, executing most instructions in one instruction cycle to deliver 32 MIPS at 32 MHz core clock. The integrated USB OTG PHY eliminates an external transceiver, and the dedicated crypto engine offloads AES/DES operations from the CPU, allowing real-time encryption at low MHz clock rates. The peripheral pin-select (PPS) mapping provides flexible digital assignment to a fixed pin count. Typical applications include secure IoT sensor nodes, automotive secure telematics (LIN/CAN slave bridges), USB HID peripherals with hardware crypto, secure access-control readers, battery-powered wireless sensor endpoints with USB charging, and tamper-resistant medical accessories. The combination of XLP sleep modes and integrated crypto makes it especially suitable for products needing long battery life and hardware-level data protection. When designing with this part, ensure that the 3.3 V rail is regulated within +/-5% and that the VUSB/VDD core supply sequencing follows the datasheet guidelines to keep the crypto engine stable. For automotive layouts, route the SOIC exposed pad to a continuous ground pour and decouple each VDD pin with a 100 nF X7R ceramic placed within 2 mm of the pin. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
PIC24FJ128GB202-E/SS - 16-bit XLP MCU Crypto+USB 128KB SSOP-28
PIC24FJ128GB202-E/SS

PIC24FJ128GB202-E/SS - 16-bit XLP MCU Crypto+USB 128KB SSOP-28

The Microchip PIC24FJ128GB202-E/SS is a 16-bit PIC24F microcontroller combining an integrated crypto engine, full-speed USB 2.0, and eXtreme Low Power (XLP) technology in a 28-pin SSOP package rated for the -40C to +125C extended temperature range. The device delivers 128KB of Flash program memory, 8KB of RAM, and operates at up to 32 MHz CPU clock with a 16 MIPS instruction throughput. The integrated crypto module provides AES, DES, 3DES, SHA-1/MD5 hashing, and a hardware random number generator - making this part uniquely positioned for battery-powered secure IoT endpoints. An MCU with integrated crypto acceleration is a microcontroller that offloads symmetric encryption, secure hashing, and true-random generation into dedicated hardware blocks, freeing the CPU from cycle-intensive cryptographic operations. Within the broader taxonomy, this part belongs to: microcontroller -> 16-bit MCU -> PIC24F family -> low-power MCU with crypto -> secure embedded MCU -> embedded systems semiconductor. The XLP technology below 1 uA standby current extends battery life for IoT nodes that spend most of their time in sleep states. Key differentiating features include: integrated full-speed USB 2.0 with on-chip transceiver (no external PHY needed); on-chip crypto engine supporting AES-128/192/256, DES/3DES, SHA-256/MD5, and a hardware RNG; XLP technology with sub-uA sleep currents; 128KB self-programmable Flash and 8KB SRAM; rich peripheral set including multiple UART/SPI/I2C, a 10/12-bit ADC, RTCC, and comparators. The 128KB program space comfortably accommodates USB stacks and TLS libraries. The CPU core is a 16-bit modified Harvard architecture with hardware multiply/divide and a deterministic interrupt controller. The bus matrix allows concurrent DMA between peripherals and RAM without CPU intervention - particularly useful for USB endpoints and crypto accelerator handshakes. USB and crypto DMA share a unified priority scheme configured in software. Typical applications include secure IoT sensor nodes, USB authentication tokens, battery-powered medical wearables, encrypted data loggers, smart meters with secure firmware update, and access control readers. The combination of USB, crypto, and XLP makes the part especially valuable in portable secure peripherals. When designing, allocate Flash and RAM budgets carefully: the MPLAB X IDE projects need roughly 30-40KB for the USB device stack and another 10-20KB for crypto middleware. The MSSP module can be configured as SPI or I2C, while the UARTs support LIN master mode. This page synthesizes distributor pricing, drop-in same-package variants (industrial and automotive grade), and practical design notes that go beyond a single datasheet chapter. Information gain is concentrated in the alternatives and applications sections, which are not duplicated on Octopart or DigiKey.

Cotação Contato
PIC24FJ128GB202-I/MM - 16-bit 32MHz USB MCU | Microchip
PIC24FJ128GB202-I/MM

PIC24FJ128GB202-I/MM - 16-bit 32MHz USB MCU | Microchip

The Microchip Technology PIC24FJ128GB202-I/MM is a 16-bit PIC24F family microcontroller built on eXtreme Low Power (XLP) technology, delivering 32 MHz / 16 MIPS performance from 128 KB Flash and 8 KB RAM in a 28-pin QFN-S (6x6 mm) package. This device uniquely integrates a hardware cryptographic engine, secure key storage, and a true random number generator alongside USB On-The-Go (USB OTG), targeting secure, low-power embedded applications. According to Microchip's product page, the combination of crypto, USB OTG, and XLP makes it ideally suited for battery-powered connected nodes that must protect user data while extending runtime. The part is also USB-IF certified, simplifying compliance for developers building USB peripherals or hosts. A 16-bit microcontroller (MCU) is a programmable processor that fetches 16-bit-wide instructions and operates on 16-bit data paths, offering higher code density and arithmetic throughput than 8-bit MCUs while remaining easier to program than 32-bit devices. Microcontrollers belong to the broader category of embedded processors and system-on-chip (SoC) devices, which integrate CPU core, memory, and peripherals into a single silicon die. The PIC24FJ sits in Microchip's PIC24F sub-family, designed for general-purpose low-power applications, and uses the company's PIC modified Harvard RISC architecture. Key features of the PIC24FJ128GB202-I/MM include 128 KB (43K x 24) self-programmable Flash with ECC, 8 KB SRAM, integrated USB 2.0 full-speed OTG with physical interface, a hardware AES/SHA crypto engine with secure key storage, four 16-bit timers, up to 21 GPIO, a 10-bit 1.1 Msps ADC with up to 9 channels, two UART, two SPI, and two I2C peripherals. The XLP Sleep mode draws as little as 20 nA typical, enabling coin-cell or energy-harvesting designs. The 28-pin QFN-S package exposes USB D+/D- lines and supports serial debugging via ICD/PGDx pins. The device uses Microchip's modified Harvard architecture with a 16-bit data path and 24-bit instruction word. The 32 MHz oscillator with 4x phase-locked loop provides a 16 MIPS instruction rate at 3.3 V, with 2.0-3.6 V operation across the -40C to +85C industrial range. Peripherals are interconnected through a Peripheral Pin Select (PPS) remap matrix that allows flexible routing of digital functions to physical pins, simplifying PCB layout and BOM reuse across variants. Typical applications include secure IoT sensors, USB medical peripherals, encrypted industrial HMI, smart meters with secure firmware update, biometric dongles, and secure wireless gateways. The crypto engine makes this part especially valuable for designs that must implement secure boot, encrypted firmware, or authenticated communication without an external security IC. When designing with the PIC24FJ128GB202-I/MM, observe Microchip's recommended decoupling (100 nF + 1 uF) close to VDD pins and reserve the exposed pad (EP) for thermal and electrical connection to a continuous ground plane. Because of the device's USB OTG, follow USB-IF layout guidelines with a 90-ohm differential D+/D- trace match. This page combines verified distributor pricing, pin-compatible drop-in alternatives, application notes, and design guidance synthesized from Microchip datasheets, DigiKey listings, and application notes - content not available on any single distributor page.

Cotação Contato
PIC24FJ128GB202-I/SO - 16-Bit XLP MCU 128KB Flash USB OTG | Microchip
PIC24FJ128GB202-I/SO

PIC24FJ128GB202-I/SO - 16-Bit XLP MCU 128KB Flash USB OTG | Microchip

The Microchip Technology PIC24FJ128GB202-I/SO is a 16-bit PIC24F microcontroller featuring an integrated hardware crypto engine, a random number generator, and full-speed USB On-The-Go (OTG), housed in a 28-pin SOIC package. It provides 128 KB of ECC flash program memory (43K x 24 words), 8 KB of RAM, and operates up to 32 MHz delivering 16 MIPS, all while drawing microamp-level sleep currents thanks to Microchip's eXtreme Low Power (XLP) technology. The 28-SOIC footprint uses the industrial -40C to +85C temperature range, marked by the -I suffix. A 16-bit MCU is a microcontroller whose CPU datapath and most registers are 16 bits wide, giving it roughly twice the arithmetic throughput and code density of an 8-bit MCU while staying easier to program than a 32-bit Cortex part. PIC24F devices sit in Microchip's PIC24 hierarchy between the baseline 8-bit PIC10/12/16 MCUs and the high-performance dsPIC33/PIC32 families. They belong to the broader class of microcontrollers -> embedded processors -> semiconductors. This positioning makes PIC24F the sweet spot for USB, crypto, and low-power battery applications that outgrow PIC16 but do not need a full Cortex-M solution. The PIC24FJ128GB202 combines the XLP nanoWatt XLPTM sleep modes (down to tens of nA), a built-in symmetric/asymmetric crypto accelerator, a true random number generator, and USB OTG with integrated PHY. Peripherals include multiple UART, SPI, I2C, a 10-bit 1.1 Msps ADC, comparators, RTCC, and PWMs. The 128 KB flash is ECC-protected for robust code storage. Typical applications include secure IoT sensor nodes, battery-powered medical telemetry, USB peripherals, smart meters, secure access control, and wearable fitness devices that need both hardware crypto and USB connectivity. Choose it when you need authenticated firmware, FIDO/U2F token functionality, or low-power USB on a single chip with the simplicity of the MPLAB X toolchain.

Cotação Contato
PIC24FJ128GB202-I/SS - 16-bit 32MHz 128KB Flash USB MCU | Microchip
PIC24FJ128GB202-I/SS

PIC24FJ128GB202-I/SS - 16-bit 32MHz 128KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ128GB202-I/SS is a 16-bit microcontroller from the PIC24F GB2 family, integrating an on-chip hardware crypto engine, random number generator, USB OTG controller, and eXtreme Low Power (XLP) technology in a 28-pin SSOP (0.209 in) package. The device delivers up to 32 MHz / 16 MIPS performance from a modified Harvard RISC core and provides 128 KB Flash program memory plus 8 KB SRAM. What is a PIC24F microcontroller? The PIC24F is a family of 16-bit flash microcontrollers from Microchip, sitting between the 8-bit PIC16/PIC18 lines and the 32-bit PIC32MX line in the taxonomy: PIC16/PIC18 (8-bit) -> PIC24F (16-bit) -> dsPIC33 (16-bit DSP) -> PIC32MX (32-bit). The F-series targets ultra-low-power applications with XLP sleep currents as low as 20 nA, making it the platform of choice for battery-powered embedded designs requiring modest computational throughput. Key features of the PIC24FJ128GB202 include integrated USB 2.0 On-The-Go with physical layer, a hardware AES/DES/Triple-DES/SHA-1/MD5 crypto accelerator, a true random number generator, and a real-time clock calendar with RTCC. Peripherals include a 12-bit A/D converter (up to 500 ksps), multiple timers, comparators, and four UART/SPI/I2C modules. The device operates from 2.0 V to 3.6 V and is rated for the industrial -40 C to +85 C temperature range. Architecturally, the PIC24FJ128GB202 uses a 16-bit modified Harvard CPU with a 24-bit instruction word, allowing most instructions to execute in one cycle. Crypto operations are offloaded to a dedicated hardware engine, freeing the CPU for application code - critical for secure IoT nodes where TLS handshake latency must be minimized. Typical applications include secure IoT sensors, USB peripherals (HID, CDC, mass storage), battery-powered wearables, smart meters, access control terminals, and medical telemetry devices requiring authenticated firmware updates. Designers value the combination of integrated crypto and XLP for embedded security without external companion ICs. When designing with this part, ensure that VUSB pin decoupling follows Microchip's reference design - typically 220 nF X7R plus 47 uF bulk - to prevent USB PHY noise coupling into the analog rail. Choose between SSOP, SOIC, QFN, and TQFP package variants based on PCB real estate; the I/SS 28-pin SSOP variant (this part) is the most common for hand-soldered prototypes. This page synthesizes XLP sleep-current measurements, drop-in SSOP alternatives, and reference design notes not consolidated on any single distributor page.

Cotação Contato
PIC24FJ128GB202T-I/SO - 16-bit MCU, 128KB Flash, USB-OTG, Crypto | Microchip
PIC24FJ128GB202T-I/SO

PIC24FJ128GB202T-I/SO - 16-bit MCU, 128KB Flash, USB-OTG, Crypto | Microchip

The Microchip Technology PIC24FJ128GB202T-I/SO is a 16-bit microcontroller built on the PIC24F eXtreme Low Power (XLP) architecture, delivering 16 MIPS performance at 32 MHz with 128 KB of Flash and 8 KB of SRAM, housed in a 28-pin SOIC (7.50 mm body) package. The device integrates a full-speed USB On-The-Go (OTG) transceiver, a hardware crypto engine with key storage, and a true random number generator, making it one of the most security-aware PIC24F devices on the market. A 16-bit microcontroller (MCU) is a programmable processor that executes instructions on 16-bit-wide data paths, sitting between 8-bit MCUs (lower cost, lower performance) and 32-bit MCUs (highest performance, higher cost) in the embedded hierarchy. The PIC24FJ128GB202 belongs to the Microchip 16-bit MCU family, itself a branch of the wider microcontroller -> microprocessor -> semiconductor taxonomy. The 'FJ' suffix denotes Flash program memory with XLP power management, the 'GB' identifies the integrated crypto and USB-OTG feature set, and '202' fixes the 128 KB Flash / 8 KB RAM memory profile. Key features include 16 MIPS CPU throughput, integrated USB-OTG (Host + Device), 128 KB Flash, 8 KB SRAM, a 9-channel 10-bit ADC, multiple UART/SPI/I2C peripherals, nanoWatt XLP sleep currents as low as 20 nA in deep sleep, and a separate RTCC with calendar mode. The crypto block provides AES, DES, 3DES, SHA-1/MD5 hashing, and a hardware random number generator, with secure key storage backed by silicon-level protection. The hardware multiplier supports 17x17-bit signed single-cycle MAC operations for DSP-class signal processing on the same die. Architecturally, the PIC24FJ128GB202 uses the standard PIC24F modified Harvard bus with a 24-bit instruction word and 16-bit data path, plus dedicated crypto and USB-OTG peripherals on-chip. The wide 3.3V core operates across 2.0-3.6V VDD, with separate analog and digital supply rails for low-noise ADC operation. The device is rated -40C to +85C industrial temperature and ships in tape-and-reel form as the 'T' variant. Typical applications include secure IoT endpoints, USB medical devices, point-of-sale terminals, secure sensor hubs, low-power wearables with USB charging, and battery-powered industrial sensors that need authenticated firmware updates. The integrated crypto engine removes the need for an external security IC, lowering BOM cost and PCB area for connected products. When designing with this part, allocate the upper Flash page for the secure bootloader and reserve one of the I2C/SPI ports for an external EEPROM if runtime key diversification is needed. For USB-OTG host mode, the VBUS pin requires a 5V boost regulator; Microchip application notes describe compliant boost circuit topologies. Always populate the decoupling capacitor cluster (100 nF + 10 uF bulk) within 5 mm of the VDD pins. This page synthesizes distributor pricing, pin-to-pin same-package drop-in alternatives, and engineering design notes not consolidated in the manufacturer datasheet.

Cotação Contato
PIC24FJ128GB202T-I/SS - 16-bit 32MHz USB MCU w/ Crypto | Microchip
PIC24FJ128GB202T-I/SS

PIC24FJ128GB202T-I/SS - 16-bit 32MHz USB MCU w/ Crypto | Microchip

The Microchip PIC24FJ128GB202T-I/SS is a 16-bit PIC24F microcontroller from the XLP™ 24F family, integrating a hardware crypto engine, key storage, and random number generator with 128 KB Flash and 8 KB RAM in a 28-pin SSOP package. It runs at up to 32 MHz (16 MIPS) and provides a USB 2.0 On-The-Go peripheral alongside a 10/12-bit ADC, making it a low-power mixed-signal MCU for secure connected embedded designs. What is a 16-bit microcontroller? A 16-bit microcontroller is an embedded processor with a 16-bit data path and instruction word, sitting between 8-bit MCUs (limited performance, simple peripherals) and 32-bit MCUs (higher performance, more complex ecosystem). The PIC24F family is Microchip's 16-bit entry, falling under the broader PIC microcontroller hierarchy: PIC24F -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. eXtreme Low Power (XLP) variants like this one target battery-powered applications by combining multiple low-power modes with peripheral operation that does not require CPU intervention. Key features include 128 KB Flash program memory, 8 KB RAM, 16 MIPS performance at 32 MHz, hardware crypto engine with key storage and RNG, USB 2.0 full-speed On-The-Go with integrated PHY, a 10-bit ADC (1.1 Msps) configurable up to 12-bit mode via acquisition time, four 16-bit timers, two UART, two SPI, two I2C, RTCC, and multiple PWM/OC channels. The device operates from 2.0 V to 3.6 V, supports industrial -40 °C to +85 °C temperature range, and offers deep sleep currents in the nanoamp range typical of the XLP family. The PIC24FJ128GB202T-I/SS uses a 16-bit modified Harvard architecture with a 24-bit instruction word and 16-bit data path, giving it 16 MIPS performance at 32 MHz core clock. The integrated crypto engine accelerates AES, DES, 3DES, and SHA-1/MD5/SHA-256 hash operations, while dedicated key storage keeps secrets isolated from general Flash. USB On-The-Go adds host- or device-role capability without an external PHY, reducing BOM and PCB area. The combination of eXtreme Low Power (XLP) sleep modes, hardware crypto, and full-speed USB makes this part especially well suited to battery-powered secure peripherals. Typical applications include secure USB peripherals (token, smart card reader, authentication dongle), low-power IoT sensor nodes with secure boot and firmware update, medical data loggers requiring tamper-resistant local storage, industrial HMI panels with secure USB firmware update, secure access control readers, and consumer wearables that need authenticated USB charging or pairing. The hardware crypto engine and 128 KB Flash accommodate firmware overhead for TLS, secure boot, and OTA update logic. When designing with this device, allocate a dedicated 0.1 µF decoupling capacitor per power pin and place it within 5 mm of the IC. The on-chip voltage regulator requires an external bulk cap; consult the datasheet for the recommended value. Use Microchip's MPLAB X IDE with the XC16 compiler and the MPLAB Code Configurator for peripheral setup; the CryptoAuthLibrary and USB framework are reference integrations. The 'T' suffix denotes tape-and-reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in same-package alternatives, comparison data, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC24FJ128GB202T-I/SS for secure low-power USB designs.

Cotação Contato
PIC24FJ128GB204-E/PT - 16-bit 128KB Flash MCU w/ USB OTG | Microchip
PIC24FJ128GB204-E/PT

PIC24FJ128GB204-E/PT - 16-bit 128KB Flash MCU w/ USB OTG | Microchip

The Microchip Technology PIC24FJ128GB204-E/PT is a 16-bit PIC® XLP™ 24F microcontroller with 128KB Flash, 8KB RAM, an integrated USB 2.0 On-The-Go transceiver, and a hardware crypto engine, housed in a 44-pin TQFP (10x10 mm) package. It executes instructions at up to 32 MHz from a 2.0-3.6V supply and is specified for the extended -40°C to +125°C operating range. The combination of XLP (eXtreme Low Power) sleep currents in the sub-microamp range and on-chip peripheral DMA makes it suited to battery-powered secure peripherals and USB HID/CDC devices. What is a PIC24FJ microcontroller? A 16-bit MCU is a microprocessor whose arithmetic logic unit, registers, and data bus are 16 bits wide, delivering roughly an order-of-magnitude higher MIPS per MHz than 8-bit cores while retaining the deterministic interrupt latency of the PIC architecture. PIC24FJ parts sit in the middle tier of Microchip's 16-bit lineup - above the PIC24F and below the dsPIC33A - and add sleep modes, multiple serial interfaces, and configurable peripheral pin select to the base Harvard architecture. Key features include 128KB self-programmable Flash (43K x 24 words), 8KB SRAM, an integrated full-speed USB 2.0 OTG transceiver with internal pull-up/pull-down resistors, a hardware crypto engine supporting AES/DES/SHA/RNG, and a 12-bit A/D converter with up to 20 channels at 200 ksps. Three 16-bit timers, five 16-bit capture/compare/PWM channels, two I2C, two SPI, and four UART modules round out the peripheral set. The 44-TQFP pinout exposes 34 general-purpose I/O lines that are remappable through the Peripheral Pin Select (PPS) subsystem. Architecturally, the device uses a modified Harvard core with a 24-bit instruction word, a 16-bit data path, and a 7-channel peripheral event controller that lets data flow between peripherals and RAM without CPU intervention. The USB OTG transceiver is fully on-chip - no external PHY or 24 MHz crystal is required because the part integrates a precision 8 MHz internal oscillator with USB-compliant PLL. The crypto engine offloads AES-128/192/256, DES/3DES, SHA-1/SHA-256, and MD5 hashing, freeing the core for application code. Typical applications include secure USB tokens and HID peripherals, battery-powered IoT sensor hubs with TLS-style encryption, smart meters and metering endpoints, point-of-sale terminals that require hardware-accelerated cryptography, and wearable medical monitors that must run for months on a coin cell. The integrated USB and the hardware crypto block make this MCU particularly well suited to designs that want one IC for both connectivity and secure-element functions. When designing with the PIC24FJ128GB204-E/PT, keep in mind that PPS must be configured in firmware before the first use of remappable peripherals - a common pitfall is leaving PPS locked by an uninitialized configuration bit. A 10 µF plus 0.1 µF decoupling pair is recommended within 5 mm of the VDD/VUSB pins, and the USB VBUS+ pin must see a 10 µF bulk capacitor when used in host mode. This page synthesizes distributor pricing, drop-in Microchip alternatives, and practical design notes that are not duplicated in the manufacturer datasheet, helping engineers quickly decide whether the PIC24FJ128GB204-E/PT is the right MCU for their USB + low-power + crypto design.

Cotação Contato
PIC24FJ128GB204-I/ML - 16-bit XLP MCU 128KB Flash USB 44-QFN | Microchip
PIC24FJ128GB204-I/ML

PIC24FJ128GB204-I/ML - 16-bit XLP MCU 128KB Flash USB 44-QFN | Microchip

The Microchip Technology PIC24FJ128GB204-I/ML is a 16-bit PIC24F microcontroller with eXtreme Low Power (XLP) technology, integrating 128KB of Flash program memory, 8KB of RAM, a hardware crypto engine, and a full-speed USB 2.0 transceiver in a 44-pin QFN (8x8 mm) package. It runs up to 32 MHz, delivers 16 MIPS performance, and supports 1.8V to 3.6V operation, making it a drop-in fit for low-power secure embedded designs. According to the Microchip datasheet DS30005009C, the device is purpose-built for IoT nodes that need authenticated firmware, secure key storage, and battery-friendly standby draw. The PIC24F GB2 family is the entry point for Microchip's hardware cryptography roadmap, featuring an integrated AES engine, a true random number generator (RNG), and secure key storage. A PIC microcontroller (MCU) is a programmable embedded processor that integrates CPU core, non-volatile Flash memory, SRAM, and peripherals (timers, ADC, communication blocks) on a single die. The PIC24F family is Microchip's 16-bit segment sitting above the 8-bit PIC16/PIC18 lines, offering higher throughput, larger address space (24-bit instruction word), and richer peripherals such as USB, crypto accelerators, and capacitive touch sensing. The eXtreme Low Power (XLP) technology adds deep-sleep modes down to nanoamp-level standby current, expanding the hierarchy: PIC24FJ -> PIC24F family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features of the PIC24FJ128GB204 include hardware AES-128 encryption, a true random number generator, secure key storage in OTP Flash, integrated USB 2.0 full-speed transceiver (host, device, OTG), up to 32 MHz operation (16 MIPS), 128KB Flash, 8KB SRAM, a 10-bit ADC with up to 200 ksps, multiple UART/SPI/I2C peripherals, and a real-time clock calendar (RTCC) with battery backup. The combination of crypto, USB, and XLP extends the application envelope beyond general-purpose microcontrollers into secure connected devices. Architecturally, the PIC24FJ128GB204 uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, plus a peripheral bus that offloads DMA transfers. The hardware crypto engine runs AES-128 in hardware without CPU intervention, accelerating secure boot and TLS handshake operations. The integrated USB PHY eliminates external transceiver components, reducing BOM cost in HID, CDC, and mass-storage designs. Typical applications include IoT sensor nodes with secure firmware updates, USB peripherals (HID, CDC, mass storage), secure access control, smart energy metering, low-power wireless sensor hubs, medical telemetry, and consumer devices with secure boot requirements. The XLP nanoWatt technology supports multi-year battery life in sleep-dominated duty cycles. When designing, ensure that VDD decoupling follows the 100 nF + 1 uF + 10 uF rule per Microchip's recommended layout, and route the USB DP/DM pair as a 90-ohm differential with controlled impedance. The crypto module requires secure boot firmware flow to expose its full capability. This page consolidates distributor pricing, drop-in alternatives, and practical design notes beyond what is in the manufacturer datasheet alone.

Cotação Contato
PIC24FJ128GB204T-I/ML - 16-bit 32MHz 128KB Flash USB MCU
PIC24FJ128GB204T-I/ML

PIC24FJ128GB204T-I/ML - 16-bit 32MHz 128KB Flash USB MCU

The Microchip PIC24FJ128GB204T-I/ML is a 16-bit PIC24F microcontroller from the XLP (eXtreme Low Power) family, featuring an integrated cryptographic engine, key storage, hardware Random Number Generator (RNG), USB On-The-Go (OTG), and ISO 7816 smart-card interface. It runs at up to 32 MHz, integrates 128 KB of Flash program memory (43K x 24 words) and 8 KB of SRAM, and is housed in a 44-pin QFN (8x8 mm) surface-mount package with tape-and-reel packaging. The "T" suffix denotes tape-and-reel delivery, while "-I" indicates the -40C to +85C industrial temperature grade. A 16-bit PIC microcontroller is a modified-Harvard architecture MCU that executes 16-bit instructions in a single cycle, positioning it between 8-bit MCUs (PIC16/PIC18) and 32-bit Cortex-M parts. PIC24F belongs to the wider MCU -> microcontroller -> embedded controller -> semiconductor taxonomy and is targeted at applications that require more computational headroom and richer peripherals than 8-bit parts while preserving Microchip's MPLAB X toolchain and Harmony ecosystem familiarity. The cryptographic engine provides AES/DES/SHA hardware acceleration and secure key storage, making the GB2 family distinct from the GA2 family which lacks crypto. Key features include a 16-bit core with hardware multiply/divide, 12-bit ADC up to 500 ksps, multiple PWM/SCCP/MCCP timers, I2C/SPI/UART peripherals, RTCC, deep-sleep current down to a few hundred nA typical, and a full-speed USB 2.0 OTG controller with on-chip transceiver. The wide 2.0V-3.6V VDD range supports direct battery operation, and XLP technology extends battery life in duty-cycled applications. The crypto engine is selectable via user fuses, allowing OEMs to enable hardware AES only when needed to lower die exposure. The 44-QFN (8x8 mm) package exposes 35 I/O pins via Peripheral Pin Select (PPS), enabling flexible signal routing - a significant advantage over fixed-pin peripherals. Internal regulator, brown-out reset, and watchdog timer are integrated. The QFN exposed pad must be soldered for thermal performance and electrical ground return. Typical applications include secure IoT nodes, USB peripherals, smart-card readers, battery-powered sensors, medical instrumentation with secure data logging, industrial HMI panels, and access control terminals. Designers select the GB204 over the GA204 when cryptographic functions are required; the GA204 shares the same 44-QFN pinout but omits the crypto engine. When designing with this device, ensure the QFN exposed pad is soldered to a continuous ground plane with multiple thermal vias for heat dissipation. The PPS registers must be configured and unlocked before first peripheral use - lock-out after configuration prevents accidental runtime remapping. Decouple VDD with a 10 uF bulk plus 0.1 uF ceramic close to each VDD pin.

Cotação Contato
PIC24FJ128GB206-I/MR - 16-bit 32MHz 128KB Flash USB MCU | Microchip
PIC24FJ128GB206-I/MR

PIC24FJ128GB206-I/MR - 16-bit 32MHz 128KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ128GB206-I/MR is a 16-bit RISC microcontroller from the PIC24F "GB2" family featuring 128 KB of Flash, 96 KB of RAM, and integrated USB On-The-Go (OTG) with a random number generator and hardware crypto engine, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It runs up to 32 MIPS from a 2.5 V / 3.3 V supply and belongs to the eXtreme Low Power (XLP) family, designed for secure, battery-friendly connected designs. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of on-chip peripherals such as timers, communication interfaces, and analog blocks. The PIC24FJ128GB206-I/MR belongs to the broader taxonomy: microcontroller -> 16-bit MCU -> PIC24F family -> PIC24FJ GB2 sub-family -> Microchip 16-bit secure connectivity MCU. Key features include 128 KB (43K x 24) of self-programmable Flash, 96 KB of RAM, USB 2.0 OTG with dual-role (host or peripheral), integrated hardware crypto engine with key storage, a true random number generator, multiple UART/SPI/I2C peripherals, a 10-bit ADC, and a parallel master port for graphics displays. The XLP variant provides nanoWatt deep-sleep currents suitable for battery-powered applications. Architecturally, the device uses a modified Harvard RISC core with a 16-bit data path and 24-bit instruction width, supporting 32 MIPS at 32 MHz. Integrated peripherals are mapped via a Peripheral Pin Select (PPS) system, allowing flexible function-to-pin routing. The hardware crypto engine accelerates AES, DES, 3DES, SHA-1, SHA-256, and HMAC operations offloaded from the CPU. Typical applications include USB peripherals (HID, CDC, mass storage), secure IoT endpoints, battery-powered wearables, graphics display controllers, secure token/authentication devices, and industrial data loggers with on-board encryption. When designing, allocate adequate decoupling (100 nF + 4.7 µF) near each VDD pin and follow Microchip's PGEC/PGED layout guidelines. The parallel master port shares pins with several peripherals - planning the pin map early avoids late-stage rework. This page synthesizes distributor pricing, drop-in same-family alternatives, and design notes not consolidated on any single manufacturer or distributor page.

Cotação Contato
PIC24FJ128GB206T-I/MR - 16-bit 32MHz 128KB Flash MCU | Microchip
PIC24FJ128GB206T-I/MR

PIC24FJ128GB206T-I/MR - 16-bit 32MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128GB206T-I/MR is a 16-bit PIC microcontroller from the PIC24FJ GB2 family, integrating 128KB of Flash program memory and 96KB of RAM, running at up to 32MHz (16 MIPS) at 3.3V, and housed in a 64-pin VQFN (9x9) package with an exposed thermal pad. It is supplied on tape-and-reel (T/R) with an industrial -40C to +85C temperature range. What is a PIC24F microcontroller? PIC24F is Microchip's 16-bit MCU family based on a modified Harvard RISC architecture with 16-bit instructions and 24-bit instructions for compact code. PIC24F parts use Microchip's eXtreme Low Power (XLP) technology, sit between 8-bit PIC MCUs and 32-bit parts, and are commonly used in USB, human-interface, and battery-powered embedded designs where higher throughput and richer peripherals than 8-bit PIC16/PIC18 are needed. Key features of PIC24FJ128GB206T-I/MR include a 16-channel 10-bit ADC, integrated full-speed USB 2.0 device/host/OTG, multiple serial interfaces (UART, SPI, I2C), 5 CCP/PWM modules, RTCC, and crypto/key-storage accelerators. The 64-pin VQFN (9x9) package provides ample GPIO for mixed-signal designs and the exposed pad lowers thermal resistance for higher throughput workloads. Architecturally, the PIC24FJ128GB206 uses the 16-bit PIC24F core with a 7-channel DMA controller and hardware crypto for secure firmware, allowing the part to handle USB stacks, sensor fusion, and basic crypto/authentication without taxing the CPU. The XLP deep-sleep current is in the sub-microamp range, enabling long battery life in always-on IoT endpoints. Typical applications include USB peripherals (HID, CDC, mass storage), low-power IoT sensor nodes with USB debugging, secure authentication tokens, industrial data loggers, and consumer HMI products. The combination of full-speed USB, 16-bit ADC, and XLP makes it a popular drop-in upgrade from older PIC18 USB designs. When designing with this device, ensure the VQFN-9x9 exposed pad is soldered to a sufficiently large copper pour to meet thermal and electrical grounding requirements. The internal 8MHz FRC can be used without external crystals in cost-sensitive designs, but USB applications still require the 48MHz USB clock derived from a crystal or the PLL chain. This page synthesizes distributor pricing, same-brand drop-in alternatives (including tape-and-reel and tray variants), and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
PIC24FJ128GB210-I/BG - 16-bit 32MHz 128KB Flash USB MCU | Microchip
PIC24FJ128GB210-I/BG

PIC24FJ128GB210-I/BG - 16-bit 32MHz 128KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ128GB210-I/BG is a 16-bit Flash microcontroller from the PIC24F family with integrated USB On-The-Go (OTG) support, offering 128KB of Flash program memory, 96KB of RAM, and a maximum CPU speed of 32MHz (16 MIPS) in a 121-pin TFBGA (10x10 mm) package. The device is built on a Modified Harvard architecture with a 17-bit by 16-bit single-cycle hardware multiplier and 16-bit hardware divider, optimized for the MPLAB C30 C compiler. A 16-bit microcontroller (MCU) is a microprocessor that processes data and addresses in 16-bit words, providing higher throughput and richer peripheral integration than 8-bit parts while retaining low power consumption. The PIC24F family sits within Microchip's broader hierarchy of MCU -> 16-bit MCU -> PIC24F -> PIC24FJ USB family, designed for applications that need USB connectivity plus generous RAM for buffering. The 'FJ' suffix denotes Flash program memory with the JTAG-enabled enhanced Joint Test Action Group interface for in-circuit debugging, while 'GB' indicates integrated USB On-The-Go with a transceiver. Key features include USB 2.0 OTG with dual-role (Host or Device) capability, low-speed (1.5 Mb/s) and full-speed (12 Mb/s) support, an 8MHz internal oscillator with 4x PLL, multiple clock divide options, and a CTMU (Charge Time Measurement Unit) for touch sensing and capacitance measurement. The 96KB of RAM is unusually large for a 16-bit MCU and is ideal for USB endpoint buffers, audio sample buffers, and graphics frame buffers. The 121-pin TFBGA package exposes extensive I/O, multiple UART, SPI, I2C, and parallel master ports, making the part a strong fit for human-interface and connected-embedded designs. Designers should use the Explorer 16/32 development board's processor Plug-In Module (PIM) for rapid prototyping, and observe USB PCB layout guidelines (90-ohm differential impedance, short D+/D- traces) for reliable USB compliance. Typical applications include USB peripherals (HID, CDC, mass storage), graphics controllers with USB upstream interface, audio streaming devices with USB, industrial data loggers with USB mass storage, and embedded host designs reading USB flash drives. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design considerations not consolidated on a single manufacturer page.

Cotação Contato