10CL080YU484A7G - Cyclone 10 LP FPGA 81K LE, 289 I/O U484BGA | Intel
N.º da peça: 10CL080YU484A7G ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $256.5 | $2.565,00 |
| 100 | $228 | $22.800,00 |
| 500 | $199.5 | $99.750,00 |
| 1.000 | $171 | $171.000,00 |
10CL080YU484A7G Visão geral
A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardware resources such as block RAM and DSP blocks, all reconfigured by the user after manufacture. Cyclone 10 LP sits inside Intel's low-power FPGA portfolio, which descends from the original Altera Cyclone family and occupies the position: FPGA -> programmable logic -> logic device -> digital IC -> semiconductor. It is engineered for a balance of logic, memory, and DSP resources at the lowest possible static and dynamic power for cost-optimized designs.
Key features of the 10CL080YU484A7G include 81,264 logic elements for state machines, datapaths, and control logic; 2,810,880 embedded memory bits (M9K blocks) for buffering and FIFO applications; 274 variable-precision DSP blocks (18x18 multipliers) for signal processing; four general-purpose PLLs for clock synthesis and management; and 289 maximum user I/O pins supporting single-ended and differential I/O standards including LVDS, LVCMOS, and SSTL. The U484 package exposes a wide I/O count that is rarely available in smaller BGA packages.
The architectural backbone combines a low-power 60 nm process, hard memory blocks, dedicated DSP blocks, and a flexible I/O ring. Designers can choose between speed grades -7 (mid) and -8 (fast) depending on timing-margin needs; this part is rated -7, balancing timing closure and cost. Configuration is via passive serial, fast passive parallel, or JTAG using an external configuration memory or the USB-Blaster download cable.
Typical applications include industrial motor control and human-machine interface (HMI) panels, video processing and broadcast bridging equipment, low-cost software-defined radio front-ends, factory automation controllers, and I/O expansion for processors in embedded systems. The combination of mid-range logic density and 289 user I/O pins makes this device well suited to designs where many parallel interfaces (parallel camera, LCD, memory bus, GPIO) must be aggregated.
When designing with this part, allocate the four PLLs carefully because they are shared resources for clock domain generation. Verify the Quartus Prime toolchain version supports the -7 speed grade and the 10CL080 device variant before committing to board layout, and review the IBIS models for the U484 package to maintain signal-integrity margin on high-speed LVDS links. Compared with the F484 package option in the same family, the U484 BGA package typically allows higher ball density, but cross-checking the pinout is mandatory if migrating.
This page synthesizes authorized distributor pricing, drop-in package-equivalent alternatives from the same Cyclone 10 LP family, and practical design notes that go beyond a single manufacturer datasheet.
Alternativas drop-in para 10CL080YU484A7G — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 10CL080YU484A7G (mesmo formato e footprint) — diferindo em Package, Embedded Memory, Speed Grade, PLLs, Process Technology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
10CL080YU484C8G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$450 / unidade
Ver ficha técnica →10CL080YU484I7G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$152 / unidade
Ver ficha técnica →10CL080YU484C6G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$34.75 / unidade
Ver ficha técnica →10CL055YU484A7G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$124.3 / unidade
Ver ficha técnica →10CL040YU484A7G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$56.8 / unidade
Ver ficha técnica →10CL080YU484A7G Classificações máximas e características elétricas
| Family | Cyclone 10 LP |
| Device | 10CL080 |
| Logic Elements (LE) | 81,264 |
| Embedded Memory Bits | 2,810,880 |
| Embedded Memory Blocks | M9K, 305 blocks |
| Multipliers (18x18) | 274 |
| DSP Blocks | 274 variable-precision DSP blocks |
| Maximum User I/O | 289 |
| PLLs | 4 general-purpose |
| Encapsulamento | 484-ball UBGA (U484) |
| Speed Grade | -7 (mid) |
| Temperatura de junção de operação | 0C to 85C (commercial) |
| Process Technology | Low-power 60 nm |
| Configuration | Passive Serial / Fast Passive Parallel / JTAG |
| Status RoHS | Compliant |
| Lead-Free | Yes |
| Tipo de montagem | Surface Mount (BGA) |
Guia de Configuração de Pinos do 10CL080YU484A7G 484-ball ubga (u484)
Configuração de pinos para 10CL080YU484A7G (pacote 484-ball ubga (u484)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para 10CL080YU484A7G.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
10CL080YU484A7G é adequado para 6 aplicaçãos: Industrial Motor Control, Video Processing and Bridging, Human-Machine Interface (HMI) Panels, I/O Expansion and Processor Bridging, Factory Automation Controllers, Test and Measurement Instrumentation.
Industrial Motor Control
The 10CL080YU484A7G is well matched to multi-axis industrial motor control because its 274 18x18 DSP blocks can run field-oriented-control (FOC) loops on multiple motors concurrently, while the 2.8 Mbits of M9K memory provide reference tables, sine/cosine lookup RAM, and per-axis state buffers. The 289 user I/O pins support simultaneous encoder (QEP) inputs, Hall-sensor capture, PWM outputs to gate drivers, and isolated SPI/UART links to a host PLC without external bus multiplexing.
Recomendado
Video Processing and Bridging
The 10CL080YU484A7G's 289 user I/O pins support parallel video input (BT.656/1120), output to LCD panels, and HDMI/DVI bridging through external serializers, while 2.8 Mbits of M9K memory provide line buffers and frame buffers. With 274 DSP blocks, the device can perform real-time color-space conversion, scaling, and overlay blending at common 1080p60 rates, eliminating the need for a separate image processor in mid-range broadcast and signage designs.
Recomendado
Human-Machine Interface (HMI) Panels
HMI panels combining a TFT display, capacitive touch controller, and multiple communication interfaces benefit from the 10CL080YU484A7G's 289 I/O pins aggregating RGB LCD data, SPI/I2C touch sensors, RS-485 fieldbuses, and Ethernet MAC interfaces. The 81,264 logic elements run custom GUI graphics pipelines, while the four PLLs generate independent pixel clocks, memory clocks, and communication clocks from a single reference oscillator.
Recomendado
I/O Expansion and Processor Bridging
In systems where an embedded CPU lacks sufficient GPIO, UART, SPI, or I2C ports, the 10CL080YU484A7G adds 289 user I/O and four PLLs that re-clock asynchronous domains onto the processor's bus. The 81K logic elements accommodate custom serial-protocol bridges (UART-to-SPI, SPI-to-I2C), PWM generators, and quadrature encoder interfaces, while the 2.8 Mbits of memory buffer DMA streams between the FPGA and the host processor.
Recomendado
Factory Automation Controllers
The 10CL080YU484A7G integrates fieldbus interfaces (PROFIBUS, Modbus, EtherCAT slave), discrete I/O handling, and motion-control sequencing on a single chip. The 274 DSP blocks accelerate PID loops at sub-millisecond intervals, while 2.8 Mbits of M9K memory provide per-axis trajectory tables and process-data buffers. The 289 user I/O handle dense parallel digital I/O modules typical of PLC racks without external bus expanders.
Recomendado
Test and Measurement Instrumentation
The 10CL080YU484A7G provides 289 user I/O pins ideal for protocol-aware logic analyzers and mixed-signal test gear, with 81K logic elements implementing state machines for stimulus generation and response capture. The 2.8 Mbits of M9K memory act as deep capture buffers for protocol bursts, while four PLLs synthesize the variable clock rates needed for I2C, SPI, UART, and parallel bus decoding at multiple speeds.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 10CL080YU484A7G — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 10CL080YU484C8G | 10CL080YU484I7G | 10CL080YU484C6G | 10CL055YU484A7G | 10CL040YU484A7G |
|---|---|---|---|---|---|---|
| Package | 484-ball UBGA (U484) | 484-ball UBGA (U484) - same | 484-ball UBGA (U484) - same | 484-ball UBGA (U484) - same | 484-ball UBGA (U484) - same | 484-ball UBGA (U484) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Family | Cyclone 10 LP | Cyclone 10 LP | Cyclone 10 LP | Cyclone 10 LP | Cyclone 10 LP | Cyclone 10 LP |
| Logic Elements | 81,264 | 81,264 (identical) | 81,264 (identical) | 81,264 (identical) | 55,296 (-32%) | 40,000 (-51%) |
| Embedded Memory (bits) | 2,810,880 | 2,810,880 (identical) | 2,810,880 (identical) | 2,810,880 (identical) | 2,340,000 (-17%) | 1,134,000 (-60%) |
| DSP Blocks (18x18) | 274 | 274 (identical) | 274 (identical) | 274 (identical) | 156 (-43%) | 56 (-80%) |
| Maximum User I/O | 289 | 289 (identical) | 289 (identical) | 289 (identical) | 289 (identical) | 289 (identical) |
| Speed Grade | -7 (mid) | -8 (fast, +10-15% Fmax) | -7 (mid) | -6 (slow, -10% Fmax) | -7 (mid) | -7 (mid) |
| Operating Temperature (junction) | 0C to 85C (commercial) | 0C to 85C (commercial) | -40C to 100C (industrial) | 0C to 85C (commercial) | 0C to 85C (commercial) | 0C to 85C (commercial) |
Principais diferenciais
- Highest-density 10CL080 device option in the U484 package (vs 10CL055YU484A7G (55,296 LEs))
- Maximum 289 user I/O for parallel interface aggregation (vs 10CL016YU484A7G (smaller Cyclone 10 LP die in same U484))
- Commercial-temperature -7 speed grade balances cost and timing margin (vs 10CL080YU484C8G (-8 speed grade))
Notas de projeto
The 484-ball UBGA package requires a 4-6 layer PCB with controlled-impedance traces for high-speed LVDS links. Use the official Intel/Altera U484 package footprint and land pattern from the package library; a 0.8 mm or 1.0 mm ball pitch is typical for this package family. Maintain a continuous ground plane on layer 2 and route high-speed signals on layer 3 with reference to it to control impedance and minimize return-path discontinuities.
Estimated: at 81K logic utilization with toggle rates of 12.5% and 289 active I/O, junction temperature rise above ambient can reach 15-20C on a 4-layer PCB with moderate thermal vias. The commercial 0-85C junction rating gives approximately 65C of margin. If your design runs above 70% utilization at sustained high toggle rates, add a thermal pad array or heatsink to keep Tj below 85C. Use the Quartus Prime PowerPlay Early Power Estimator before final layout.
Do not confuse the U484 package suffix (Ultra FineLine BGA, 484 balls) with the F484 package suffix (FineLine BGA, 484 balls) - the U484 and F484 have different ball patterns and are NOT pin-compatible. Verify the exact device variant in the Quartus Prime device selector before committing to PCB layout. Cyclone 10 LP configuration requires a supported configuration device or download cable; JTAG-only configuration is acceptable for development but not for production without a configuration memory.
Informações de conformidade
RoHS and lead-free per Intel/Altera product page. AEC-Q100 not applicable - this is an FPGA, not an automotive-qualified IC. Halogen-free status not explicitly stated in the verified data.