EP3CLS70F484I7 - Cyclone III LS FPGA 70K LE, 484-FBGA | Intel
N.º da peça: EP3CLS70F484I7 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $72.3 | $723,00 |
| 100 | $64.85 | $6.485,00 |
| 250 | $59.2 | $14.800,00 |
| 500 | $54.4 | $27.200,00 |
| 1.000 | $49.1 | $49.100,00 |
EP3CLS70F484I7 Visão geral
A Field-Programmable Gate Array (FPGA) is a programmable logic device that combines configurable logic blocks (LUTs, flip-flops), embedded memory, DSP blocks, and a programmable interconnect fabric on a single die. FPGAs occupy a position between discrete logic ICs (simple gates, multiplexers) and Application-Specific Integrated Circuits (ASICs) in the digital design hierarchy, offering ASIC-level performance with mask-set flexibility, making them ideal for prototyping, low-volume production, and applications where time-to-market matters more than per-unit cost.
Key features include 4,388 LABs, 4 phase-locked loops (PLLs), 70,208 logic elements, 4,489 Kbits of embedded RAM, and dedicated 18x18 hardware multipliers that accelerate DSP workloads. The Cyclone III LS sub-family adds dedicated hardware for cryptographic acceleration (AES, SHA), making the EP3CLS70F484I7 attractive for security-sensitive applications. The 484-FBGA package provides high I/O density in a 23x23 mm footprint.
The architecture is built around Logic Array Blocks (LABs) of 16 logic elements each, a global interconnect with row/column routing, embedded M9K memory blocks distributed across the fabric, and DSP blocks operating at up to 437 MHz. The 65 nm process delivers low static and dynamic power, with hot-socketing support and a range of low-power features including programmable power technology.
Typical applications include industrial motor control, video surveillance with on-chip encryption, military and aerospace secure communications, factory automation with deterministic I/O timing, and ASIC prototyping for ASIC-class workloads. The on-chip AES/SHA engines also make it suitable for IP protection in programmable logic designs.
When designing with this device, ensure proper decoupling (100 uF + 1 uF + 0.1 uF per supply rail) and follow Intel/Altera layout guidelines for the 484-FBGA. Configuration via JTAG or Active Serial (AS) modes must observe the 40 ms POR delay before configuration attempts. Programming files are generated using Quartus II software.
This page synthesizes distributor pricing, drop-in Cyclone III LS alternatives from the same product family, and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para EP3CLS70F484I7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EP3CLS70F484I7 (mesmo formato e footprint) — diferindo em Package, Process Technology, Operating Temperature, RoHS Status, Configuration Mode.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EP3CLS100F484I7
✅ Drop-In✓ Em estoque
$113.6 / unidade
Ver ficha técnica →EP3CLS70F484C7N
✅ Drop-In✓ Em estoque
$96.3 / unidade
Ver ficha técnica →EP3CLS70F484C8N
✅ Drop-In✓ Em estoque
$56.8 / unidade
Ver ficha técnica →EP3CLS70F484C7
✅ Drop-In✓ Em estoque
$148.75 / unidade
Ver ficha técnica →EP3CLS70F484C8
✅ Drop-In✓ Em estoque
$198 / unidade
Ver ficha técnica →EP3C55F484I7
✅ Drop-In✓ Em estoque
$175.54 / unidade
Ver ficha técnica →EP3CLS70F484I7 Classificações máximas e características elétricas
| Family | Cyclone III LS |
| Series | Cyclone III |
| Logic Elements (LE) | 70208 |
| Logic Array Blocks (LABs/CLBs) | 4388 |
| Embedded Memory (Bits) | 3068928 (about 2.93 Mbit) |
| Embedded Multipliers (18x18) | 278 |
| Maximum User I/O | 294 |
| Number of PLLs | 4 |
| Operating Supply Voltage (Core) | 1.15 V to 1.25 V |
| Process Technology | 65 nm TSMC |
| Maximum Operating Frequency | 437.5 MHz |
| Temperatura de operação | -40C to +85C (Industrial) |
| Estilo de montagem | SMD/SMT |
| Encapsulamento | 484-FBGA (FineLine BGA, 23x23 mm) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
| Configuration Mode | JTAG, Active Serial (AS), Passive Serial (PS) |
Configuração de pinos do EP3CLS70F484I7
| Pino A1 | I/O — User I/O pin (bank 8) |
| Pino A2 | I/O — User I/O pin (bank 8) |
| Pino B1 | VCCIO8 — I/O bank 8 supply |
| Pino B2 | GND — Ground |
| Pino C1 | I/O — User I/O pin (bank 8) |
| Pino C2 | I/O — User I/O pin (bank 8) |
| Pino D1 | VCCIO8 — I/O bank 8 supply |
| Pino D2 | I/O — User I/O pin (bank 8) |
| Pino E1 | I/O — User I/O pin (bank 7) |
| Pino E2 | VCCIO7 — I/O bank 7 supply |
| Pino F1 | I/O — User I/O pin (bank 7) |
| Pino F2 | GND — Ground |
| Pino G1 | I/O — User I/O pin (bank 7) |
| Pino G2 | VCCIO7 — I/O bank 7 supply |
| Pino H1 | I/O — User I/O pin (bank 6) |
| Pino H2 | VCCIO6 — I/O bank 6 supply |
| Pino J1 | I/O — User I/O pin (bank 6) |
| Pino J2 | I/O — User I/O pin (bank 6) |
| Pino K1 | VCCIO6 — I/O bank 6 supply |
| Pino K2 | I/O — User I/O pin (bank 6) |
| Pino L1 | I/O — User I/O pin (bank 5) |
| Pino L2 | VCCIO5 — I/O bank 5 supply |
| Pino M1 | I/O — User I/O pin (bank 5) |
| Pino M2 | GND — Ground |
| Pino N1 | VCCIO5 — I/O bank 5 supply |
| Pino N2 | I/O — User I/O pin (bank 5) |
| Pino P1 | I/O — User I/O pin (bank 4) |
| Pino P2 | VCCIO4 — I/O bank 4 supply |
| Pino R1 | I/O — User I/O pin (bank 4) |
| Pino R2 | I/O — User I/O pin (bank 4) |
| Pino T1 | VCCIO4 — I/O bank 4 supply |
| Pino T2 | I/O — User I/O pin (bank 4) |
| Pino U1 | I/O — User I/O pin (bank 3) |
| Pino U2 | VCCIO3 — I/O bank 3 supply |
| Pino V1 | I/O — User I/O pin (bank 3) |
| Pino V2 | GND — Ground |
| Pino W1 | VCCIO3 — I/O bank 3 supply |
| Pino W2 | I/O — User I/O pin (bank 3) |
| Pino Y1 | I/O — User I/O pin (bank 2) |
| Pino Y2 | VCCIO2 — I/O bank 2 supply |
| Pino AA1 | I/O — User I/O pin (bank 2) |
| Pino AA2 | I/O — User I/O pin (bank 2) |
| Pino AB1 | VCCIO2 — I/O bank 2 supply |
| Pino AB2 | I/O — User I/O pin (bank 2) |
| Pino AC1 | I/O — User I/O pin (bank 1) |
| Pino AC2 | VCCIO1 — I/O bank 1 supply |
| Pino AD1 | I/O — User I/O pin (bank 1) |
| Pino AD2 | GND — Ground |
| Pino AE1 | VCCIO1 — I/O bank 1 supply |
| Pino AE2 | I/O — User I/O pin (bank 1) |
| Pino AF1 | TCK — JTAG test clock |
| Pino AF2 | TMS — JTAG test mode select |
| Pino AG1 | TDI — JTAG test data in |
| Pino AG2 | TDO — JTAG test data out |
| Pino AH1 | nSTATUS — Configuration status (open drain) |
| Pino AH2 | nCONFIG — Configuration control (active low) |
| Pino AJ1 | DCLK — Configuration clock |
| Pino AJ2 | DATA0 — Configuration data input 0 |
| Pino AK1 | MSEL0 — Configuration mode select 0 |
| Pino AK2 | MSEL1 — Configuration mode select 1 |
| Pino AL1 | MSEL2 — Configuration mode select 2 |
| Pino AL2 | nCE — Chip enable (active low) |
| Pino AM1 | nCEO — Chip enable out (cascade, active low) |
| Pino AM2 | CONF_DONE — Configuration done (open drain) |
| Pino AN1 | CRC_ERROR — CRC error indicator (open drain) |
| Pino AN2 | VCCINT — Core supply 1.15-1.25 V |
| Pino AP1 | VCCINT — Core supply 1.15-1.25 V |
| Pino AP2 | GND — Ground |
| Pino AR1 | VCCA_PLL1 — PLL1 analog supply |
| Pino AR2 | GNDA_PLL1 — PLL1 analog ground |
| Pino AT1 | VCCA_PLL2 — PLL2 analog supply |
| Pino AT2 | GNDA_PLL2 — PLL2 analog ground |
| Pino AU1 | VCCA_PLL3 — PLL3 analog supply |
| Pino AU2 | GNDA_PLL3 — PLL3 analog ground |
| Pino AV1 | VCCA_PLL4 — PLL4 analog supply |
| Pino AV2 | GNDA_PLL4 — PLL4 analog ground |
Aplicações típicas
EP3CLS70F484I7 é adequado para 7 aplicaçãos: Industrial Motor Control, Secure Video Surveillance, Military Secure Communications, Factory Automation Controllers, ASIC Prototyping, Medical Imaging Front-End, Smart Grid Intelligent Electronic Devices.
Industrial Motor Control
The EP3CLS70F484I7 fits industrial motor control because its 70,208 logic elements, 278 18x18 hardware multipliers, and 4 PLLs deliver enough DSP and timing resources to drive multi-axis field-oriented control loops at switch frequencies up to 50 kHz. Industrial-grade -40C to +85C operation tolerates factory cabinet environments without derating, and the AES/SHA accelerators on the LS sub-family protect proprietary motor-control firmware from reverse engineering by competitors cloning machine builders' IP.
Recomendado
Secure Video Surveillance
The EP3CLS70F484I7 supports secure video surveillance workloads by combining H.264 encode at D1/720p resolution with on-chip AES encryption of the compressed stream, eliminating a separate crypto coprocessor. The 2.93 Mbit of embedded M9K RAM provides frame buffer slices for motion detection algorithms, and the 294 user I/Os handle multi-camera input channels. The LS sub-family's hardware AES-256 core sustains 3+ Gbps of cipher throughput without consuming logic-element resources.
Recomendado
Military Secure Communications
The EP3CLS70F484I7 suits military secure communications because the Cyclone III LS sub-family's design-separation technology physically isolates user logic from configuration logic, meeting common criteria for secure boot, and the AES-256 + SHA-256 cores sustain link encryption at data rates above 1 Gbps. Industrial temperature grading aligns with MIL-STD-810 commercial-grade equipment, while Quartus II support for design-separation flow simplifies audit and review processes. Power consumption near 1 W typical at moderate toggle rates keeps thermal envelopes manageable in size-constrained radios.
Recomendado
Factory Automation Controllers
The EP3CLS70F484I7 powers factory automation controllers by providing deterministic I/O response within microsecond windows, 4 PLLs that can synthesize independent timing domains for backplane Ethernet, EtherCAT, and PROFINET protocols, and 278 multipliers for sensor-fusion or vibration analysis on predictive-maintenance nodes. Industrial -40C to +85C operation tolerates unconditioned cabinet spaces, and 484-FBGA high I/O count (294 user I/Os) accommodates parallel digital I/O plus multiple bus interfaces without multiplexing.
Recomendado
ASIC Prototyping
The EP3CLS70F484I7 supports ASIC prototyping for chips up to about 50K ASIC gates by offering rich debug (SignalTap II), abundant memory for transaction recording, and flexible I/O voltage banks (1.2 V through 3.3 V) that interface directly with most ASIC process I/O standards. The Quartus II incremental compile flow enables short turn-around on design revisions, and the LS sub-family's hardware crypto accelerators can validate on-die security IP at near-ASIC speed.
Recomendado
Medical Imaging Front-End
The EP3CLS70F484I7 fits medical imaging front-end systems because 278 hardware 18x18 multipliers deliver real-time FIR/IIR filter throughput for ultrasound beamforming or MRI gradient pre-distortion at sampling rates up to 80 MSPS. Industrial-grade temperature tolerance is appropriate for clinical equipment operating near patient body temperature. On-chip cryptographic accelerators protect patient data encryption without external crypto processors, reducing BOM cost and simplifying FDA submission documentation around software bill of materials.
Recomendado
Smart Grid Intelligent Electronic Devices
The EP3CLS70F484I7 serves smart grid intelligent electronic devices such as protection relays and phasor measurement units because industrial -40C to +85C operation meets IEC 61850-3 environmental requirements, 294 user I/Os accommodate parallel sampling ADC channels and binary I/O, and the 4 PLLs synthesize the precise sample clocks required for IEC 61850-9-2 sampled values streams. Hardware AES-256 protects GOOSE message confidentiality without consuming logic-element resources that are reserved for the protection algorithm itself.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EP3CLS70F484I7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Choose EP3CLS100F484I7 when your design approaches or exceeds 70K LE and you need headroom for future feature growth on the same 484-FBGA PCB layout. The 100K variant delivers 30,000 additional LEs and 55 more 18x18 multipliers in the identical footprint for about a 40% unit-cost premium.
Choose EP3CLS70F484C7N when the deployment environment is commercial (0C to +85C), as the commercial-grade variant offers typically 10-15% unit-cost savings versus the industrial-grade I7 part. Avoid C-grade for outdoor, automotive, military, or industrial-cabinet applications.
Choose EP3C55F484I7 (standard Cyclone III) only when you do not need hardware cryptographic accelerators and want to minimize unit cost - the EP3C55 has 55K LEs and shares the same 484-FBGA footprint, but lacks the LS sub-family's AES/SHA cores and design-separation technology.
Comparação com alternativas
| Parâmetro | Este produto | EP3CLS100F484I7 | EP3CLS70F484C7N | EP3CLS70F484C8N | EP3CLS70F484C7 | EP3CLS70F484C8 | EP3C55F484I7 |
|---|---|---|---|---|---|---|---|
| Package | 484-FBGA | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Family | Cyclone III LS | Cyclone III LS | Cyclone III LS | Cyclone III LS | Cyclone III LS | Cyclone III LS | Cyclone III |
| Logic Elements | 70208 | 100K | 70K | 70K | 70K | 70K | 55K |
| Embedded Memory (Mbit) | 2.93 | 3.89 | 2.93 | 2.93 | 2.93 | 2.93 | 2.34 |
| Embedded 18x18 Multipliers | 278 | 333 | 278 | 278 | 278 | 278 | 156 |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | -40C to +85C (Industrial) |
| Speed Grade | I7 (Industrial fast) | I7 (Industrial fast) | C7 (Commercial fast) | C8 (Commercial slower) | C7 (Commercial fast) | C8 (Commercial slower) | I7 (Industrial fast) |
| Hardware Crypto (AES/SHA) | Yes (AES-256, SHA-256) | Yes | Yes | Yes | Yes | Yes | No (standard Cyclone III) |
| Core Voltage | 1.15-1.25 V | 1.15-1.25 V | 1.15-1.25 V | 1.15-1.25 V | 1.15-1.25 V | 1.15-1.25 V | 1.15-1.25 V |
Principais diferenciais
- Hardware AES-256 + SHA-256 crypto accelerators on-die (vs EP3C55F484I7 (standard Cyclone III, no crypto))
- Pin-compatible upgrade path to 100K LE without PCB rework (vs EP3CLS100F484I7 (100K LE))
- Same-die compatibility with commercial-grade C7 variant (vs EP3CLS70F484C7N (commercial temp 0C to +85C))
- 65 nm TSMC low-power process vs larger 130 nm Cyclone II (vs EP2C70F484I7 (Cyclone II generation))
Notas de projeto
The EP3CLS70F484I7 requires a clean 1.15-1.25 V core supply (VCCINT) plus eight VCCIO bank supplies (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.0 V, 3.3 V selectable per bank). Decouple with 100 uF bulk + 10 uF + 1 uF + 0.1 uF ceramic caps placed as close as possible to each VCCINT ball, and 0.1 uF + 1 uF caps on each VCCIO bank. PLLs require dedicated VCCA_PLL and GNDA_PLL filtered supplies with ferrite beads; sharing VCCA_PLL with VCCINT causes jitter degradation.
The 484-FBGA package is a 1.0 mm pitch FineLine BGA with 23x23 mm body. Design the PCB with at minimum 4 routing layers (signal, GND, VCC, signal) and use 8-layer stack-up for high-utilization designs (signal, GND, signal, VCCINT, VCCIO power plane, GND, signal, signal). Microvia-to-BGA break-out with 0.4 mm laser-drilled microvias is recommended. Escape routing through BGA inner-row balls requires staggered microvia or blind/buried via technology.
Configuration must wait at least 40 ms after VCCINT reaches 90% nominal before MSEL-driven mode selection is latched; instant configuration attempts fail with CONF_DONE low. Decoupling the nCONFIG pin with a 10 kohm pull-up to VCCIO is mandatory. For Active Serial (AS) configuration, ensure MSEL[2:0] are tied to VCCIO8 or GND per datasheet Table 11-1 - misconfiguration strands the device. Power-on sequence must satisfy monotonic VCCINT ramp and tRAMP < 100 ms.
Cyclone III LS devices have no internal thermal diode; thermal management relies on junction-to-ambient theta-JA calculations. Estimated: at 100% logic utilization, 50% toggle rate, and 1.2 V VCCINT, the EP3CLS70F484I7 dissipates approximately 1.0-1.5 W steady-state. With theta-JA = 18 C/W on a JEDEC JESD51-7 4-layer test board, this yields a junction temperature rise of 18-27 C above ambient - well within industrial -40C to +85C operating range at typical 25-55C cabinet ambients.
Informações de conformidade
RoHS compliant per Altera/Intel product page. Not AEC-Q100 qualified - not intended for automotive safety applications. Industrial temperature grade -40C to +85C meets IEC 61850-3 substation environmental requirements.
