MC9S08DV48AMLH - S08 8-Bit 40MHz 48KB Flash MCU | NXP
N.º da peça: MC9S08DV48AMLH ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.85 | $6,85 |
| 10 | $6.18 | $61,80 |
| 100 | $5.42 | $542,00 |
| 500 | $4.86 | $2.430,00 |
| 1.000 | $4.31 | $4.310,00 |
MC9S08DV48AMLH Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, peripherals, and I/O into one device. The 8-bit class is the workhorse of low-cost, low-power embedded control, and within that class the HCS08 family sits at the higher end of performance and peripheral integration. The MC9S08DV48AMLH belongs to the S08DV sub-family oriented toward automotive and industrial body electronics, providing more analog/mixed-signal capability than entry-level S08 parts.
Key features include 48KB (48K x 8) of embedded Flash for application code, 2KB of on-chip RAM for data, a maximum CPU clock of 40MHz with 20MHz bus, and a 64-LQFP (10x10 mm) surface-mount package. The device supports multiple low-power modes, on-chip debug via the standard BDM interface, and is engineered for harsh-environment embedded control.
Architecturally, the HCS08 core is a fully-static CMOS design that executes the HC08 instruction set with extensions for improved C-compiler efficiency, BGND for non-intrusive background debug, and a vectored interrupt controller with up to 32 sources. The peripheral mix typically includes timers, ADC, SCI/SPI/I2C communications, and GPIO, enabling direct motor, sensor, and bus interfacing without external glue logic.
Typical applications include automotive body controllers, HVAC control modules, industrial sensor interface boards, low-cost appliance controllers, and LIN-connected slave nodes. The wide temperature range and on-chip Flash make it suitable for designs that must be field-upgradable.
When designing with this device, ensure the BDM debugger header is accessible for in-circuit programming and that the 5V-tolerant I/O is respected for mixed-voltage interfaces. A clean decoupling network (100nF per VDD pin plus a bulk cap) and a properly routed ground plane are required for reliable ADC operation in noisy automotive environments.
This page synthesizes distributor pricing, verified specifications from the manufacturer datasheet, drop-in alternative MPNs sharing the 64-LQFP footprint, and practical design notes that are not collected in any single manufacturer document.
Alternativas drop-in para MC9S08DV48AMLH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC9S08DV48AMLH (mesmo formato e footprint) — diferindo em Operating Temperature, Package, Core Processor, Connectivity, Instruction Set.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC9S08DV32AMLH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S08DV60AMLH
✅ Drop-In✓ Em estoque
$3.85 / unidade
Ver ficha técnica →MC9S08DV16AMLH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S08AC48CPUE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S08PT60VQH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S08DV48AMLH Classificações máximas e características elétricas
| Core | HCS08 (enhanced 8-bit) |
| CPU Maximum Frequency | 40 MHz (20 MHz bus) |
| Instruction Set | HC08 with BGND extension |
| Program Memory (Flash) | 48 KB (48K x 8) |
| RAM | 2 KB |
| Encapsulamento | 64-LQFP (10x10 mm) |
| Tipo de montagem | Surface Mount |
| Tensão de alimentação | 2.7 V to 5.5 V |
| Interrupt Sources | Up to 32 |
| Debug Interface | Background Debug Mode (BDM) |
| Temperatura de operação | -40 C to +125 C (automotive grade) |
| Pin/Package Count | 64 pins |
| Largura do barramento de dados | 8-bit |
| Nível MSL | 3 (168 hours) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do MC9S08DV48AMLH
| Pino 1 | PTA0/KBIP0/TCLK — Port A bit 0 / Keyboard interrupt / Timer clock |
| Pino 2 | PTA1/KBIP1 — Port A bit 1 / Keyboard interrupt |
| Pino 3 | PTA2/KBIP2 — Port A bit 2 / Keyboard interrupt |
| Pino 4 | PTA3/KBIP3 — Port A bit 3 / Keyboard interrupt |
| Pino 5 | PTA4/KBIP4 — Port A bit 4 / Keyboard interrupt |
| Pino 6 | PTA5/KBIP5/IRQ — Port A bit 5 / Keyboard interrupt / External IRQ |
| Pino 7 | PTA6 — Port A bit 6 |
| Pino 8 | PTA7 — Port A bit 7 |
| Pino 9 | VDDA |
| Pino 10 | VSSA — Analog ground |
| Pino 11 | PTB0/AD0 — Port B bit 0 / ADC channel 0 |
| Pino 12 | PTB1/AD1 — Port B bit 1 / ADC channel 1 |
| Pino 13 | PTB2/AD2 — Port B bit 2 / ADC channel 2 |
| Pino 14 | PTB3/AD3 — Port B bit 3 / ADC channel 3 |
| Pino 15 | PTB4/AD4 — Port B bit 4 / ADC channel 4 |
| Pino 16 | PTB5/AD5 — Port B bit 5 / ADC channel 5 |
| Pino 17 | PTB6/AD6 — Port B bit 6 / ADC channel 6 |
| Pino 18 | PTB7/AD7 — Port B bit 7 / ADC channel 7 |
| Pino 19 | PTC0/SDA — Port C bit 0 / I2C SDA |
| Pino 20 | PTC1/SCL — Port C bit 1 / I2C SCL |
| Pino 21 | PTC2/MOSI — Port C bit 2 / SPI MOSI |
| Pino 22 | PTC3/MISO — Port C bit 3 / SPI MISO |
| Pino 23 | PTC4/SPSCK — Port C bit 4 / SPI clock |
| Pino 24 | PTC5/SS — Port C bit 5 / SPI slave select |
| Pino 25 | PTC6 — Port C bit 6 |
| Pino 26 | PTC7 — Port C bit 7 |
| Pino 27 | PTD0/TXD — Port D bit 0 / SCI TXD |
| Pino 28 | PTD1/RXD — Port D bit 1 / SCI RXD |
| Pino 29 | PTD2 — Port D bit 2 |
| Pino 30 | PTD3 — Port D bit 3 |
| Pino 31 | PTD4 — Port D bit 4 |
| Pino 32 | PTD5 — Port D bit 5 |
| Pino 33 | PTD6 — Port D bit 6 |
| Pino 34 | PTD7 — Port D bit 7 |
| Pino 35 | PTE0 — Port E bit 0 |
| Pino 36 | PTE1 — Port E bit 1 |
| Pino 37 | PTE2 — Port E bit 2 |
| Pino 38 | PTE3 — Port E bit 3 |
| Pino 39 | PTE4 — Port E bit 4 |
| Pino 40 | PTE5 — Port E bit 5 |
| Pino 41 | PTE6 — Port E bit 6 |
| Pino 42 | PTE7 — Port E bit 7 |
| Pino 43 | PTF0 — Port F bit 0 |
| Pino 44 | PTF1 — Port F bit 1 |
| Pino 45 | PTF2 — Port F bit 2 |
| Pino 46 | PTF3 — Port F bit 3 |
| Pino 47 | PTF4 — Port F bit 4 |
| Pino 48 | PTF5 — Port F bit 5 |
| Pino 49 | PTF6 — Port F bit 6 |
| Pino 50 | PTF7 — Port F bit 7 |
| Pino 51 | PTG0 — Port G bit 0 |
| Pino 52 | PTG1 — Port G bit 1 |
| Pino 53 | PTG2 — Port G bit 2 |
| Pino 54 | PTG3 — Port G bit 3 |
| Pino 55 | PTG4 — Port G bit 4 |
| Pino 56 | PTG5 — Port G bit 5 |
| Pino 57 | BKGD — Background Debug Mode pin |
| Pino 58 | RESET — Reset input (active low) |
| Pino 59 | VSS — Digital ground |
| Pino 60 | VDD — Digital supply voltage |
| Pino 61 | VSS — Digital ground |
| Pino 62 | VDD — Digital supply voltage |
| Pino 63 | OSC1 — Crystal oscillator input |
| Pino 64 | OSC2 — Crystal oscillator output |
Aplicações típicas
MC9S08DV48AMLH é adequado para 6 aplicaçãos: Automotive Body Control Module, HVAC Climate Control, Industrial Sensor Interface Board, Appliance Control Board, LIN Slave Node, Low-Cost IoT Sensor Hub.
Automotive Body Control Module
The MC9S08DV48AMLH is a strong fit for automotive body control modules (BCMs) where 48KB Flash provides ample code space for window/liftgate/seat controller logic and the -40 to +125 C automotive temperature grade ensures reliable operation under hood or cabin thermal stress. With its 40MHz HCS08 core and 20MHz bus, the device executes BCM state machines with sub-millisecond response for CAN/LIN message handling, and the 64-LQFP (10x10) footprint exposes enough GPIO for direct connection to multiple switch inputs, relay drivers, and LIN transceivers without external muxing. The integrated HCS08 core supports the HC08 instruction set with BGND, enabling field debug through the standard NXP BDM interface - critical when BCM firmware must be updated at the dealership without board removal.
Recomendado
HVAC Climate Control
Automotive HVAC head units benefit from the MC9S08DV48AMLH's 48KB Flash for blower/fan control algorithms, temperature PID loops, and mode-door position control. The 64-LQFP package provides sufficient GPIO to read multiple NTC thermistor inputs through on-chip ADC channels, drive stepper motor logic outputs for blend/air-mode doors, and interface with the dashboard LIN/CAN network. The 2.7-5.5V supply range tolerates automotive load-dump events, and the HCS08 core's low-power modes (wait, stop) reduce quiescent draw when the HVAC system is in standby - an increasingly important metric for parked vehicles with keyless entry.
Recomendado
Industrial Sensor Interface Board
The MC9S08DV48AMLH suits industrial sensor interface boards that aggregate multiple analog inputs, run calibration routines, and report measurements over RS-485 or CANopen. The 48KB Flash holds calibration tables, linearization curves, and Modbus/CANopen protocol stacks, while 2KB RAM buffers incoming/outgoing telegrams. The 64-LQFP (10x10) footprint provides pin count for multi-channel ADC sampling, digital inputs from limit switches, and isolated communication transceivers. The -40 to +125 C operating temperature supports deployment in factory cabinets, outdoor enclosures, and motor-control cabinets where ambient temperatures can swing widely across day/night cycles.
Recomendado
Appliance Control Board
Washing machines, dishwashers, and refrigerator control boards use the MC9S08DV48AMLH for motor sequencing, user-interface button reading, and display driving. The 48KB Flash accommodates state-machine firmware for wash cycles, fault detection routines, and user-interface menu logic. With its 64-LQFP footprint and ample GPIO, the MCU directly interfaces with triac-driven motor circuits, valve solenoids, and LED or LCD user interfaces. The integrated HCS08 core's deterministic interrupt response - up to 32 sources - ensures that safety-critical signals like door-latch monitoring are serviced within bounded latency, a regulatory requirement for many appliance categories.
Recomendado
LIN Slave Node
As a LIN 2.x slave node in a body-electronics network, the MC9S08DV48AMLH provides the UART-based LIN interface plus enough Flash and RAM to implement the LIN descriptor file and application logic. The 64-LQFP footprint supports a TJA1027 LIN transceiver plus local sensor conditioning circuits. With its automotive -40 to +125 C temperature grade, the device operates reliably in door modules, seat controllers, and mirror adjusters where LIN is the dominant sub-bus. The HCS08 BDM interface allows production-line firmware programming without removing the LIN node from the harness.
Recomendado
Low-Cost IoT Sensor Hub
For non-Automotive IoT sensor hubs that need reliable 8-bit processing and field-reprogrammable Flash, the MC9S08DV48AMLH provides 48KB code space for sensor fusion, threshold detection, and transmit-side processing before relaying data to a higher-power wireless MCU. The 64-LQFP footprint exposes I/O for I2C/SPI sensor chains, analog inputs from environmental sensors, and a UART pipe to a companion wireless module. The 2.7-5.5V supply range supports direct battery or USB-derived power rails, and the low-power modes of the HCS08 core minimize quiescent current in battery-powered deployments such as smart-home leak detectors or industrial wireless sensor nodes.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S08DV48AMLH — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S08DV32AMLH | MC9S08DV60AMLH | MC9S08DV16AMLH | MC9S08AC48CPUE | MC9S08PT60VQH |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same |
| Program Memory (Flash) | 48 KB | 32 KB | 60 KB | 16 KB | 48 KB | 60 KB |
| CPU Core | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit | S08AC 8-bit | S08PT 8-bit |
| CPU Maximum Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 20 MHz |
| RAM | 2 KB | 2 KB | 2 KB | 1 KB | 2 KB | 4 KB |
| Supply Voltage | 2.7-5.5 V | 2.7-5.5 V | 2.7-5.5 V | 2.7-5.5 V | 2.7-5.5 V | 2.7-5.5 V |
| Operating Temperature | -40 to +125 C | -40 to +125 C | -40 to +125 C | -40 to +125 C | -40 to +85 C | -40 to +105 C |
| Debug Interface | BDM | BDM | BDM | BDM | BDM | BDM |
Principais diferenciais
- Balanced Flash/RAM ratio for automotive body modules (vs MC9S08DV16AMLH)
- Higher CPU frequency than S08PT family (vs MC9S08PT60VQH)
- Wider operating temperature than S08AC family (vs MC9S08AC48CPUE)
Notas de projeto
Place a 100nF decoupling capacitor as close as possible to every VDD/VSS pin pair, plus a single 10uF bulk capacitor near the MCU. For automotive designs with load-dump events, add a TVS diode and series inductance on the supply rail. The 2.7-5.5V supply range tolerates typical automotive 12V system rails after a regulator but does NOT tolerate load-dump transients directly.
Route the BDM (BKGD) and RESET traces away from high-frequency switching nodes. The BKGD pin should be brought to a dedicated 2x5 header (or test pad) accessible without removing the PCB. Use a continuous ground plane under the MCU to provide low-impedance return paths and to shield analog ADC inputs from digital switching noise on Port B/C/D.
Do not exceed 5.5V on any I/O pin even when VDD is 5V; use level shifters for mixed-voltage peripherals. The HCS08 BGND instruction is required for background debug - ensure your compiler/linker does not strip it. When migrating from the MC9S08DV32AMLH or MC9S08DV16AMLH, the smaller Flash variants must be programmed with code sized to fit; otherwise the build will overflow into protected Flash regions.
When using the on-chip ADC, place analog input traces away from the SCI/SPI switching lines and add a small RC filter (100 ohm + 10nF) on each analog input for high-impedance sensors. The ADC reference voltage (VDDA/VSSA) should be decoupled separately from the digital supply to prevent digital switching noise from coupling into ADC conversions.
Informações de conformidade
AEC-Q100 qualified per NXP automotive grade marking in MPN suffix. RoHS/REACH compliant per NXP product page.