STM32F072C8U6TR - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
N.º da peça: STM32F072C8U6TR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
STM32F072C8U6TR Visão geral
A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and I/O into one component. Within the hierarchy of embedded semiconductors, this MCU belongs to the ARM Cortex-M0 class of general-purpose 32-bit microcontrollers and is used to execute firmware, read sensors, control outputs, and manage communication interfaces. The Cortex-M0 architecture provides a compact instruction set and deterministic embedded-control platform, while the STM32F0 family targets cost-sensitive applications that require more than a basic 8-bit controller.
Verified features include a 48 MHz maximum CPU frequency, 64KB Flash organized as 64K x 8, 37 I/O, USB, CAN, and a 48-UFQFPN package with exposed pad. The 48 MHz clock provides additional processing headroom for protocol handling and control tasks compared with slower entry-level MCUs. USB and CAN connectivity can reduce the need for external interface components in connected industrial or embedded products, although the final design must still verify device-specific peripheral configurations.
The STM32F072C8U6TR is suited to applications that need moderate control performance, serial communication, and compact packaging. Its 64KB Flash capacity is appropriate for moderate firmware images, while the 48-pin package provides a substantial I/O count for sensors, actuators, communications, and control signals. Because the verified data does not provide RAM size, ADC details, timer resources, voltage limits, temperature range, or exact pin names, those parameters must be confirmed in the manufacturer datasheet before schematic or PCB sign-off.
Typical applications include industrial control nodes, USB-connected peripherals, CAN-based automation equipment, IoT sensing nodes, motor-control interfaces, and metering products. The exposed pad should be connected according to the manufacturer land-pattern and thermal guidance. Designers should preserve the required decoupling structure, route sensitive communications carefully, and confirm the exact pin multiplexing before finalizing a board layout.
This product data combines verified distributor specifications, manufacturer product information, sourcing links, and engineering selection guidance. It is intended to support initial design decisions, not to replace the complete STM32F072x8/xB datasheet, reference manual, errata documents, or board-level validation.
Alternativas drop-in para STM32F072C8U6TR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32F072C8U6TR (mesmo formato e footprint) — diferindo em Core, Flash Memory, Package.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM32F072C8U6
✅ Drop-In✓ Em estoque
$2.4344 / unidade
Ver ficha técnica →STM32F072C8T6TR
✅ Drop-In✓ Em estoque
$4.6378 / unidade
Ver ficha técnica →STM32G071C8U7TR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
HK32F072C8U6
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32F072C8U6TR Classificações máximas e características elétricas
| Core | ARM Cortex-M0, 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64KB (64K x 8) |
| Number of I/O Pins | 37 I/O |
| Connectivity | USB and CAN |
| Encapsulamento | 48-UFQFPN (7 x 7 mm) with exposed pad |
| Core Architecture | ARM Cortex-M0 |
| Product Family | STM32F0 |
| Device Type | 32-bit microcontroller |
| Communication Interfaces | USB and CAN |
| Tipo de montagem | Surface mount |
| Supplier Packaging | Tape and reel |
| Manufacturer Product Page | STM32F072C8 |
Guia de Configuração de Pinos do STM32F072C8U6TR 48-ufqfpn (7 x 7 mm) with exposed pad
Configuração de pinos para STM32F072C8U6TR (pacote 48-ufqfpn (7 x 7 mm) with exposed pad). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32F072C8U6TR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32F072C8U6TR é adequado para 7 aplicaçãos: Industrial Control Nodes, USB-CAN Gateway Equipment, IoT Sensor Nodes, Motor-Control Interfaces, USB-Connected Measurement Products, Metering and Embedded Automation, Compact Consumer Accessories.
Industrial Control Nodes
STM32F072C8U6TR fits compact industrial control nodes that need a 48 MHz Cortex-M0 core, 37 I/O, USB, and CAN in a 7 x 7 mm package. The 64KB Flash budget supports moderate supervisory and control firmware while leaving the MCU responsible for sensor conditioning, digital logic, actuator commands, and communication. Use CAN for distributed equipment and USB for configuration or service connectivity, subject to the exact peripheral and electrical details in the manufacturer documentation. The compact package helps reduce board area, but exposed-pad layout, decoupling, and thermal paths still require careful PCB implementation.
Recomendado
USB-CAN Gateway Equipment
The verified USB and CAN capabilities make STM32F072C8U6TR a candidate for USB-to-CAN gateway products. A gateway can use USB as a host-side service interface while CAN connects to industrial or vehicle equipment, allowing one MCU to coordinate protocol conversion, buffering, status reporting, and configuration. The 48 MHz Cortex-M0 core provides processing headroom, and the 48-UFQFPN package supports compact implementations. Firmware should include timeout handling, bus fault recovery, ESD protection, and isolation or protection appropriate to the external CAN environment.
Recomendado
IoT Sensor Nodes
STM32F072C8U6TR can serve as the local controller in a small IoT sensing node where the device must read inputs, apply control logic, and communicate status. Its 37 I/O provides room for digital sensors, switches, indicators, and actuator signals, while USB and CAN support wired connectivity. The 64KB Flash capacity is suited to moderate firmware rather than very large applications, so developers should budget memory carefully. Low-power behavior, sleep currents, analog performance, and exact peripheral mappings are not present in the supplied verified data and must be validated before battery-powered deployment.
Recomendado
Motor-Control Interfaces
STM32F072C8U6TR is suitable for the supervisory and interface portion of compact motor-control systems. Its 48 MHz processing capability can handle timing-sensitive control tasks, while 37 I/O allows connection to position sensors, switches, status LEDs, gate-driver control signals, and communication transceivers. USB and CAN can support tuning, diagnostics, and factory configuration. The exact timer features, PWM channels, encoder support, and motor-control performance are not supplied in the verified data, so a motor-control design must confirm the device's peripheral resources and electrical limits from the ST datasheet.
Recomendado
USB-Connected Measurement Products
STM32F072C8U6TR can support compact measurement and metering products that collect sensor data and expose it through USB. The 32-bit Cortex-M0 core at up to 48 MHz is appropriate for sequencing measurements, applying calibration, maintaining data buffers, and responding to host commands. The 37 I/O count leaves room for digital inputs, status outputs, and communication signals, while the 48-UFQFPN package supports space-constrained instruments. ADC characteristics, measurement accuracy, timer availability, and USB electrical implementation are not specified in the supplied sources and must be verified before selecting the MCU for precision measurement.
Recomendado
Metering and Embedded Automation
STM32F072C8U6TR is appropriate for metering and embedded automation products requiring a compact controller with wired connectivity. The device can coordinate digital measurement inputs, outputs, local status indication, configuration storage, and host communication through USB or CAN. Its 48 MHz Cortex-M0 core and 64KB Flash provide a balanced baseline for supervisory firmware without requiring a larger package. Because the supplied data does not confirm RAM, ADC, timer, temperature, or power specifications, production designs should verify memory headroom, calibration paths, watchdog behavior, and peripheral availability in the official documentation.
Recomendado
Compact Consumer Accessories
STM32F072C8U6TR can be used in compact consumer accessories that need USB connectivity, multiple I/O, and moderate embedded processing. Possible roles include configuration interfaces, status controllers, sensor hubs, and USB peripheral control. The 48-UFQFPN package helps minimize footprint, while the Cortex-M0 core and 64KB Flash support a focused firmware image. Consumer-product validation should include USB enumeration, ESD immunity, connector protection, power-supply behavior, and enclosure-related thermal effects. The verified web data does not state USB speed, endpoint count, or power characteristics, so those details require direct datasheet confirmation.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32F072C8U6TR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32F072C8U6 | STM32F072C8T6TR | STM32G071C8U7TR | HK32F072C8U6 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | Hua Hong Semiconductor |
Principais diferenciais
- Integrated connectivity in a compact package (vs Generic non-connected entry-level MCU)
- Higher stated CPU frequency than the package-only comparison candidate (vs STM32F072C8U6)
- Defined 64KB Flash baseline (vs STM32G071C8U7TR)
Notas de projeto
Use the manufacturer UFQFPN land pattern and follow the exposed-pad requirements for the STM32F072C8U6TR. Place decoupling capacitors close to the device power pins, preserve short return paths, and keep the exposed-pad copper connected to the specified thermal and electrical land. Do not infer the pinout from the package drawing alone; verify every signal and alternate function against the official STM32F072x8/xB datasheet.
Route USB and CAN-related signals with short, controlled-impedance paths where applicable, and provide the required connector, protection, and transceiver components. USB data pairs should be routed as a differential pair with minimized stubs and uninterrupted reference planes. CAN is a physical bus and normally requires a suitable transceiver, termination strategy, surge protection, and grounding or isolation appropriate to the installation environment.
Do not treat STM32F072C8U6, STM32F072C8U6TR, or another STM32F0 ordering code as interchangeable solely because the package name matches. Confirm the complete ordering information, temperature grade, flash option, pin assignments, and lifecycle status. The supplied data confirms 64KB Flash, 48MHz operation, USB, CAN, 37 I/O, and the 48-UFQFPN package, but it does not confirm RAM, voltage, ADC, timers, or thermal limits.
Informações de conformidade
The supplied verified data does not provide compliance statements for STM32F072C8U6TR. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current STMicroelectronics documentation.
