Микроконтроллеры

Товары (19.000+)

F-XC866-4FRI - 8-Bit XC800 MCU 16KB Flash 26.7MHz | Infineon
F-XC866-4FRI

F-XC866-4FRI - 8-Bit XC800 MCU 16KB Flash 26.7MHz | Infineon

The Infineon F-XC866-4FRI is an 8-bit single-chip microcontroller based on the high-performance XC800 CISC core with on-chip FLASH memory and integrated peripherals. The device operates at up to 26.7 MHz CPU clock, integrates 16 KB on-chip program FLASH and 768 B RAM, and is housed in a PG-TSSOP-38 surface-mount package. It combines a powerful 8051-compatible instruction set with embedded peripherals tuned for cost-sensitive industrial and automotive sensor applications. An 8-bit microcontroller (MCU) is a programmable logic device that integrates a CPU, non-volatile program memory, volatile data memory, and peripheral blocks onto a single silicon die. Within the broader semiconductor taxonomy, an 8-bit MCU is a sub-class of microcontroller, itself a sub-class of embedded processor, which falls under the Integrated Circuits hierarchy. The Infineon XC800 family specifically targets applications requiring deterministic real-time response, on-chip analog signal conditioning, and high immunity to automotive electromagnetic interference. Key features of the F-XC866-4FRI include a 5 V single-voltage supply with on-chip voltage regulator and on-chip oscillator, embedded ADC for analog signal acquisition, capture/compare units (CCU) for PWM generation, and a MultiCAN node for automotive network interfacing. The on-chip voltage regulator enables operation from a single 5 V supply, simplifying PCB power design, while the embedded oscillator eliminates the external crystal in many cost-driven applications. These features collectively support sensor signal acquisition, actuator control, and LIN-bus networked nodes. Architecturally, the F-XC866-4FRI employs a Harvard-style memory organization with separate program and data paths. The on-chip FLASH supports in-system programming (ISP) and in-application programming (IAP) for field firmware updates. The MultiCAN module provides hardware-accelerated CAN 2.0B frame handling, offloading the CPU and improving real-time responsiveness. The capture/compare and PWM units operate independently of the CPU, supporting high-resolution timing without software overhead. Typical applications include automotive body electronics such as door modules, seat controllers, and lighting controllers; industrial sensor signal conditioning; small motor control in HVAC dampers and pumps; and LIN-bus slave nodes communicating with a central body controller. The on-chip oscillator with PLL multiplication allows flexible clock generation without external crystals. When designing with the F-XC866-4FRI, ensure the supply decoupling follows Infineon reference design guidelines - a 100 nF ceramic capacitor close to each VDD pin plus a bulk tantalum or aluminum-polymer capacitor on the 5 V rail. The MultiCAN bus lines require external ESD protection and common-mode chokes for automotive EMC compliance, and unused GPIO pins should be configured as outputs with defined levels to minimize current leakage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an engineer-focused overview optimized for sourcing, replacement, and design decisions.

Запрос цены Контакты
F280023PMSR - C2000 32-bit MCU, 100MHz, 64KB Flash, 64-LQFP | Texas Instruments
F280023PMSR

F280023PMSR - C2000 32-bit MCU, 100MHz, 64KB Flash, 64-LQFP | Texas Instruments

The Texas Instruments F280023PMSR is a C2000™ 32-bit real-time microcontroller from the F28002x family, featuring a C28x CPU core with FPU and TMU running at 100 MHz, paired with 64 KB (32K x 16) of flash memory and packaged in a 64-pin LQFP (PM) measuring 10x10 mm. The device integrates a single-precision floating-point unit and a trigonometric math unit, making it purpose-built for control-loop math in power-conversion and motor-drive applications. Per the LCSC distributor listing, this MPN carries the 'S' temperature grade, supporting -40°C to 125°C junction temperature in a natural convection environment. A C2000 microcontroller is a 32-bit MCU family engineered specifically for real-time control. In the broader taxonomy, the F280023PMSR sits as: microcontroller -> embedded MCU -> 32-bit MCU -> real-time control MCU -> C2000 family -> F28002x sub-family. Unlike general-purpose MCUs that prioritize connectivity or low power, C2000 devices focus on deterministic interrupt latency and high-resolution PWM generation, which are foundational for digital control of switches, motors, and power converters. Key features include the 100 MHz C28x core with hardware FPU/TMU for single-cycle trigonometric math, 64 KB flash, integrated control peripherals (ePWM, eCAP, eQEP), analog comparators and ADCs, plus InstaSPIN-FOC library compatibility. The device's FPU/TMU offloads math-intensive routines such as Park/Clarke transforms, freeing the CPU for application logic. The 64-LQFP package offers generous GPIO and a generous PCB thermal pad footprint for cost-sensitive designs. Architecturally, the F28002x combines the legacy C28x DSP-style core with a C28x+CLA-style bus matrix and a tightly-coupled control-law accelerator option in higher SKUs. The FPU executes single-precision IEEE-754 arithmetic in hardware, while the TMU accelerates sin, cos, arctan, and square-root operations used in field-oriented control (FOC) firmware. Typical applications include solar inverters, industrial motor drives (BLDC/PMSM), digital power supplies, traction inverters, and LED lighting drivers. The integrated PWM and ADC peripherals make it a strong fit for any closed-loop digital control system that demands deterministic sub-microsecond response. When designing with this part, ensure your linker script reserves the correct flash wait-state configuration for 100 MHz operation, and review the boot-ROM GPIO multiplexing table before laying out the PCB. This page synthesizes distributor pricing, same-family F28002x drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты
F280045PMSR - C2000 32-bit MCU, 100MHz, 256KB Flash | TI
F280045PMSR

F280045PMSR - C2000 32-bit MCU, 100MHz, 256KB Flash | TI

The Texas Instruments F280045PMSR is a C2000™ 32-bit Piccolo™ microcontroller with a 100 MHz C28x CPU core, 256 KB of on-chip flash, and a 64-pin LQFP (PM) package measuring 10x10 mm. It integrates a single-precision floating-point unit (FPU) and a Trigonometric Math Unit (TMU) for accelerated math operations commonly required in real-time control loops. A microcontroller (MCU) is a programmable processor that integrates a CPU core, memory (Flash and RAM), and peripherals into a single silicon die. The C2000 family sits inside the broader microcontroller taxonomy as MCU -> 32-bit MCU -> DSP-enhanced MCU -> real-time control MCU, and is purpose-built for digital power conversion, motor control, and signal-conditioning applications where deterministic, sub-microsecond interrupt response is required. Key features include 256 KB (256K x 8) of flash, 100 KB of RAM, fourteen 12-bit ADC channels, two 12-bit DAC outputs, three on-chip programmable gain amplifiers (PGAs), and a Sigma-Delta Filter Module (SDFM) for isolated current/voltage sensing. Communication peripherals include SPI, SCI/UART, I2C, CAN, and LIN. The 1.14 V to 1.32 V core supply is generated internally from a 3.3 V rail via an integrated voltage regulator. The architecture pairs a Harvard-style bus with a tightly coupled control-law accelerator (CLA) and the FPU/TMU pair, executing trigonometric and matrix operations in hardware. This reduces software loop latency versus a software-emulated math approach, allowing higher switching frequencies in digital power supplies. Typical applications include digital totem-pole PFC converters, solar inverters, server/telecom SMPS, industrial motor drives, traction inverters, EV charging stations, and battery management systems. The SDFM and PGA blocks particularly benefit isolated shunt-based current sensing in high-voltage systems. When designing with this device, ensure the 3.3 V supply is decoupled with at least one 1 µF and one 100 nF ceramic capacitor near each VDDS pin, and follow TI's SPRS942 layout guidelines for the LQFP PM package to keep digital return currents out of the analog ground domain. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes that are not found in the manufacturer datasheet alone.

Запрос цены Контакты
F280049CPZQR - 32-bit C2000 MCU 100MHz 256KB Flash 100-LQFP | TI
F280049CPZQR

F280049CPZQR - 32-bit C2000 MCU 100MHz 256KB Flash 100-LQFP | TI

The Texas Instruments F280049CPZQR is a 32-bit C2000 Piccolo-class automotive-grade microcontroller (MCU) running at 100 MHz with 256 KB of integrated Flash, 100 KB of SRAM, and a C28x CPU core augmented by a single-precision FPU, TMU accelerator, and a programmable Control Law Accelerator (CLA). The device is housed in a 100-pin LQFP (PZ) package measuring 14 mm x 14 mm with 0.5 mm lead pitch. What is a C2000 Piccolo MCU? The C2000 family is Texas Instruments' real-time microcontroller platform optimized for closed-loop digital control of power conversion, motor drive, and lighting systems. Piccolo is the cost- and feature-optimized sub-family within C2000, sitting below the Delfino performance line but above the value-oriented F28002x line. The hierarchy is: C28x core -> C2000 real-time MCU -> digital signal controller -> embedded processor. Key features of the F280049CPZQR include four 12-bit analog-to-digital converters (ADCs) for high-speed sensing, two 12-bit DACs for analog reference generation, three on-chip programmable gain amplifiers (PGAs), sigma-delta filter (SDFM) channels for isolated current sensing, four configurable logic blocks (CLBs) for hardware customization, and a rich communications peripheral set including CAN-FD, SPI, I2C, UART, and LIN. The supply voltage range of 1.14 V to 1.32 V for the core and 3.3 V for the I/O ring makes it compatible with industrial and automotive power trees. Architecturally, the F280049C variant differs from the F280049 base device by adding CLB logic. The C28x core runs at 100 MHz (10 ns cycle time), delivering 100 MIPS with deterministic interrupt latency under 25 cycles, which is critical for digital power control loops operating at sub-microsecond periods. The integrated CLA offloads time-critical control tasks from the CPU, freeing it for higher-level supervisory functions, communications, and fault handling. Typical applications include on-board chargers (OBC) and DC-DC converters for electric vehicles, traction inverters, solar micro-inverters, telecom rectifiers, server power-supply units (PSU), digital LED drivers, and industrial motor-control servo drives. The wide operating temperature range of -40 C to +125 C and AEC-Q100 qualification make the part suitable for under-hood automotive environments. Designers should size local decoupling per the datasheet (typically 1 x 100 nF + 1 x 4.7 uF per VDD pin pair) and follow the PCB layout recommendations in the F28004x hardware-design guide. Because this is a 0.5 mm-pitch LQFP, hand-rework is feasible - unlike BGAs in the same family - which simplifies prototype bring-up and field rework. This page consolidates distributor pricing, verified drop-in alternatives, application notes, and design tips not found in the manufacturer datasheet alone.

Запрос цены Контакты
F280049CPZS - 100MHz C28x MCU 256KB Flash LQFP-100 | TI
F280049CPZS

F280049CPZS - 100MHz C28x MCU 256KB Flash LQFP-100 | TI

The Texas Instruments F280049CPZS is a C2000™ 32-bit Piccolo microcontroller built on the C28x core, running at 100 MHz with an integrated single-precision FPU, Trigonometric Math Unit (TMU), and Control Law Accelerator (CLA), packaged in a 100-pin LQFP (PZ) measuring 14x14 mm. It integrates 256 KB of flash, 100 KB of RAM, an InstaSPIN-FOC motor-control library, Configurable Logic Block (CLB), programmable gain amplifiers (PGAs), and Sigma-Delta Filter Module (SDFM) peripherals on-chip. A C2000 Piccolo microcontroller is a real-time control MCU in TI's C2000 family, architected for high-performance digital control loops in power electronics and motor drives. The C28x core executes deterministic control code at fixed cycle counts; the on-chip FPU accelerates floating-point math while the TMU offloads sin/cos/atan/division, all critical for field-oriented control. C2000 MCUs occupy the "real-time MCU" stratum in TI's MCU taxonomy (C2000 > TMS320 > 32-bit MCU > microcontroller > embedded processing). The device supports 3.0-3.6 V I/O and 1.14-1.32 V core supply via internal LDO. It includes 21 channels of 12-bit ADC, two 12-bit DACs, multiple high-resolution PWM modules with valley switching, plus CAN-FD, SPI, UART, I2C, and USB connectivity. On-chip PGAs with up to 12x gain enable direct current-shunt feedback without external amplifiers in motor drives. F280049CPZS targets digital power converters (totem-pole PFC, LLC, phase-shifted full-bridge), industrial motor drives (PMSM, BLDC, ACIM, SR), servo amplifiers, solar inverters, and on-board EV chargers. The InstaSPIN-FOC library identifies motor parameters without rotary sensors in under 2 minutes. Designers should allocate 4-layer PCB with a solid ground pour under the LQFP-100 thermal pad. For SVM at 100 kHz, ensure DC-DC supply ripple is below 50 mVpp. The CLB allows custom logic on-chip, eliminating external CPLDs in many fault-handling circuits. This page consolidates datasheet specifications, drop-in alternatives, distributor stock, and design notes that complement the manufacturer datasheet with selection-oriented engineering context.

Запрос цены Контакты
F28027PTT - 60MHz C28x Piccolo MCU, 64KB Flash | Texas Instruments
F28027PTT

F28027PTT - 60MHz C28x Piccolo MCU, 64KB Flash | Texas Instruments

The Texas Instruments F28027PTT (also known as TMS320F28027PTT) is a 32-bit C2000 Piccolo microcontroller built around the C28x core, operating at up to 60 MHz. It features 64KB (32K x 16) of flash memory and is housed in a 48-pin LQFP (PT) package measuring 7x7 mm. This device is designed for real-time control applications, offering a high level of analog integration and an internal voltage regulator for single-rail operation. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable input/output peripherals on a single chip. The C28x core is a 32-bit fixed-point DSP-optimized architecture from Texas Instruments, specifically engineered for real-time control tasks. It sits within the C2000 family, which is a subset of microcontrollers tailored for industrial and automotive control systems, such as motor drives, power conversion, and digital power supplies. The C28x core excels at executing control algorithms with high precision and low latency, making it a preferred choice for closed-loop systems. Key features of the F28027PTT include a 60 MHz clock speed, 64KB flash memory, and a rich set of control peripherals. It integrates a 12-bit ADC, multiple PWM channels, and communication interfaces like SPI, SCI (UART), and I2C. The device operates over a temperature range of -40°C to 105°C, making it suitable for harsh environments. The internal voltage regulator simplifies power supply design, allowing operation from a single 3.3V rail. Technically, the F28027PTT leverages the C28x core's Harvard architecture, which enables simultaneous instruction and data access, improving throughput. The flash memory supports on-chip programming, facilitating firmware updates in the field. The device also includes a boot ROM with factory-programmed bootloader routines, enabling flexible boot options from various interfaces. The analog-to-digital converter (ADC) offers 12-bit resolution with multiple sample-and-hold channels, crucial for precise sensor measurements in control loops. Typical applications include white goods (such as washing machines and refrigerators), switched-mode power supplies (SMPS), and DC-DC multiple-output power supplies. The F28027PTT's high-performance C28x core and integrated peripherals make it ideal for implementing complex control algorithms like field-oriented control (FOC) for motors and digital power conversion. Its low pin count and small package footprint also suit space-constrained designs. When designing with this device, ensure proper decoupling of the power supply pins and consider the thermal characteristics of the LQFP package. The internal voltage regulator requires an external capacitor for stability. Additionally, the ADC reference pins should be filtered to minimize noise, as this directly impacts measurement accuracy in control applications.

Запрос цены Контакты
F29H859TU-Q1 - Automotive C2000 64-bit MCU | Texas Instruments
F29H859TU-Q1

F29H859TU-Q1 - Automotive C2000 64-bit MCU | Texas Instruments

The Texas Instruments F29H859TU-Q1 is an automotive-grade C2000 real-time microcontroller featuring a 64-bit C29x CPU running at 200MHz with triple-core architecture and lockstep capability. It provides 4MB of flash memory and is designed for functional safety compliance in power electronics, motor control, and GaN/SiC-based applications. The C2000 family is a well-known series of ultra-low-latency MCUs optimized for real-time control. The F29H859TU-Q1 belongs to the F29H85x sub-family, which leverages the next-generation C29 CPU core to enable high power density and high switching frequency operation. This MCU is specifically qualified for automotive environments (Q1 suffix), meeting the stringent reliability and AEC-Q100 standards required in vehicles. Key features of the F29H859TU-Q1 include a triple-core 200MHz C29x CPU with lockstep mode for enhanced safety, 4MB flash memory, and functional safety compliance. The architecture supports advanced real-time control loops, making it suitable for applications like DC-DC converters, traction inverters, on-board chargers, and solar inverters. The F29H859TU-Q1 is available in a BGA package, which is the only practical packaging option for this high pin-count MCU as confirmed by TI support. The device is designed for surface mount assembly and operates across automotive temperature ranges, enabling compact and robust system designs. Typical applications include digital power supply control, motor control for electric vehicles, renewable energy inverters, and industrial automation systems. The high-performance CPU and large flash memory allow for complex algorithms and firmware updates, while the functional safety features ensure reliable operation in safety-critical systems. When designing with the F29H859TU-Q1, engineers should consider adequate thermal management and decoupling for high-speed digital switching. The C29x architecture requires careful attention to power supply stability and PCB layout to maximize performance and safety.

Запрос цены Контакты
F29P329SM-Q1 - 200MHz C29 Auto MCU | Texas Instruments
F29P329SM-Q1

F29P329SM-Q1 - 200MHz C29 Auto MCU | Texas Instruments

The Texas Instruments F29P329SM-Q1 is an automotive-grade 64-bit C2000 real-time microcontroller featuring the next-generation C29 CPU running at 200 MHz. It integrates 2MB of flash memory and supports lockstep operation for functional safety compliance, making it suitable for ASIL-D / SIL-3 applications. The device comes in a 100-pin PZS package and operates over -40°C to +125°C. What is a C2000 real-time microcontroller? The C2000 family is a series of MCUs designed for real-time control applications such as motor control, power conversion, and digital power supplies. These MCUs feature a highly efficient CPU with low latency, integrated analog peripherals (ADCs, DACs, comparators), and enhanced PWM modules, enabling precise control loops. The C29 CPU is the latest generation, offering higher performance and advanced safety features. Key features include 200MHz operation, 2MB flash, lockstep with error detection, functional safety compliance (ISO 26262), and automotive AEC-Q100 qualification. The C29 core is a 64-bit architecture with 128-bit data paths, providing faster single-cycle access to memory. The device supports multiple communication interfaces such as CAN, UART, SPI, and I2C, though exact counts are not available from the provided data. Typical applications include automotive motor control (e.g., traction inverters), digital power supplies (e.g., LLC converters), vehicle electrification (battery management), industrial drives, and renewable energy inverters. The 200MHz clock and advanced PWM capabilities ensure high-precision control loops. When designing with this MCU, pay attention to power supply decoupling and thermal management. The 200MHz core can dissipate significant power; use multiple VDD pins with ceramic capacitors and consider thermal vias under the exposed pad. Also, use the lockstep fail-safe features to implement safe shutdown paths.

Запрос цены Контакты
FF8062701084002 - Celeron B730 1.80GHz Mobile CPU | Intel
FF8062701084002

FF8062701084002 - Celeron B730 1.80GHz Mobile CPU | Intel

The Intel FF8062701084002 is the OEM packaging code for the Mobile Intel Celeron Processor B730, a single-core 1.80 GHz CPU built on the Sandy Bridge microarchitecture and packaged in a Socket G2 (FCPGA10) form factor. The part runs at 1.80 GHz base frequency, integrates 256 KB of L2 cache and a shared 1.5 MB Intel Smart Cache (L3), supports a 5 GT/s DMI link to the Mobile Intel HM65/HM70 Express chipset, and has a 35 W TDP designed for notebook platforms. Background - What is a mobile Celeron processor? The Intel Celeron line is a value-tier x86 CPU family positioned below the Core i3/i5/i7 series in Intel's mobile product stack. A Celeron Dual-Core B730 belongs to the Sandy Bridge (2nd-generation Core) family and uses the same 32 nm process as mainstream Core parts, but with reduced L3 cache and a single active core (the "Dual-Core" suffix reflects the dual-core silicon die with one core enabled). This places the B730 in the broader hierarchy: CPU -> x86 processor -> mobile Celeron -> Sandy Bridge -> Intel mobile value-segment family. Key features include a 1.80 GHz core frequency, 2.5 GT/s on-die interconnect, integrated Intel HD Graphics (Graphics 2000-class) running at 650-1000 MHz, SSE4.x instruction set support, Intel 64 architecture, and Execute Disable Bit for security. The 35 W TDP allows thin-and-light notebook designs without active cooling upgrades. Virtualization (VT-x) is supported for entry-level server and desktop-virtualization workloads. From an architectural standpoint, the B730 implements a single Sandy Bridge core with the legacy ring-topology L3 cache, dual-channel DDR3 memory controller (up to DDR3-1333), and a flexible DMI 2.0 link to the PCH. The shared 1.5 MB L3 cache, while smaller than the 3-8 MB found on Core parts, is sufficient for entry-level office workloads and basic multimedia playback. Hyper-Threading is disabled on the Celeron B730 (1 core / 2 threads vs. the dual-core B8xx SKUs), and Turbo Boost is also disabled, keeping the part at a fixed 1.80 GHz. Typical applications include low-cost business notebooks, education/1:1 classroom laptops, entry-level consumer laptops, point-of-sale terminals, and thin-client devices. The B730 is also used in legacy industrial PCs and embedded HMIs where Socket G2 motherboards are already deployed. Design considerations: pairing the B730 with a Mobile Intel HM65 or HM70 chipset PCH is required because of the DMI 2.0 host interface. Memory must be DDR3 SO-DIMM (1.5 V) in dual-channel configuration for maximum bandwidth; mixing densities will fall back to single-channel. The OEM tray part (FF8062701084002) is intended for system integrators - retail boxed equivalents carry a different SSPEC code. This page synthesizes OEM packaging identification, key specifications, real distributor listings, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты
FS32K116LAT0MFMT - S32K116 48MHz 128KB Flash MCU | NXP
FS32K116LAT0MFMT

FS32K116LAT0MFMT - S32K116 48MHz 128KB Flash MCU | NXP

The NXP Semiconductors FS32K116LAT0MFMT is an ARM Cortex-M0+ 32-bit automotive microcontroller from the S32K1 family, operating at 48 MHz with 128 KB of Flash memory and housed in a 32-pin HVQFN (5x5 mm) package. It integrates FlexCAN with CAN FD support, hardware cryptographic security (CSEc), and FlexIO for flexible peripheral emulation. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals. In the automotive electronic control unit (ECU) hierarchy, the S32K116 sits at the entry level of the S32K1 scalable family that targets general-purpose automotive and high-reliability industrial applications compliant with ISO 26262 up to ASIL B. Its Cortex-M0+ core is optimized for deterministic real-time control at very low power. Key features include 128 KB Flash, 16 KB (or up to 17 KB per Mouser summary) SRAM, a 2.7 V to 5.5 V supply range suitable for direct automotive 12 V battery regulation, low-power run/stop/vlpr/vlps modes, and an integrated CAN FD controller for modern automotive networking. The 32-HVQFN package (5x5 mm) is a thermally enhanced leadless QFN that supports reflow soldering and minimizes PCB footprint. The device is part of NXP's FunSafeTI-equivalent SafeAssure program and is qualified to AEC-Q100. The S32K116 uses the Cortex-M0+ Von Neumann core with a 3-stage pipeline and NVIC interrupt controller. It incorporates a bandgap-based analog block supporting ADC and comparators, FlexIO for emulating UART/SPI/I2C, and an on-chip CSEc cryptographic engine (AES-128) for secure boot and secure communication. The combination of Cortex-M0+ simplicity with automotive peripherals makes the architecture ideal for deterministic body and chassis control. Typical applications include automotive body controllers, CAN-FD gateway nodes, BCM (body control modules), lighting/ECL controllers, HVAC blowers, seat/window control units, and industrial PLCs requiring AEC-Q100 reliability. The 128 KB Flash tier targets applications that outgrow lower-end S32K11x parts but do not need the larger memories of S32K14x. When designing with this part, allocate PCB copper area under the exposed pad for thermal relief (although at typical automotive temperatures and lower clock peripherals the dissipation is modest). Confirm the CAN FD bit-rate and bus load against the FlexCAN reference manual; use NXP's S32 Design Studio and the SDK for the configuration framework. Check the latest errata before committing to a PCB revision. This page synthesizes distributor pricing, parametric comparison with same-family alternatives, and design notes sourced from NXP's S32K1xx datasheets - context not present on a single distributor page.

Запрос цены Контакты
FS32K118LAT0MLFT - 256KB Flash Cortex-M0+ 48MHz MCU | NXP
FS32K118LAT0MLFT

FS32K118LAT0MLFT - 256KB Flash Cortex-M0+ 48MHz MCU | NXP

The NXP Semiconductors FS32K118LAT0MLFT is an ARM Cortex-M0+ 32-bit automotive microcontroller from the S32K1 family, integrating 256 KB of Flash and 25 KB of RAM, running at up to 48 MHz, and housed in a 48-pin LQFP (7x7 mm) package rated for 3.3 V / 5 V operation. It is part of the general-purpose S32K MCU lineup and is AEC-Q100 qualified for automotive use. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The Cortex-M0+ core implements the Armv6-M architecture with a 2-stage pipeline and is tailored for deterministic, low-power embedded control. S32K1 family MCUs sit in the broader hierarchy: Cortex-M0+ -> 32-bit MCU -> automotive MCU -> semiconductor, and are widely adopted in body electronics and chassis applications. Key features include a CAN FD controller for high-bandwidth in-vehicle networking, FlexIO for emulating additional UART/SPI/I2C/IIS interfaces, an HSE security engine supporting CSEc for secure boot and key storage, low-power run and standby modes, and a 12-bit ADC with up to 16 channels plus a comparator and FTM timers for motor and PWM control. The 48 MHz maximum core frequency provides ample headroom for sensor fusion and protocol stacks. Technically, the S32K118 die uses an embedded Flash controller with ECC, hardware cryptographic acceleration in the HSE block (AES, RSA, ECC), and a sophisticated clock tree supporting PLL, FLL, and external crystal references. Functional safety features target ISO 26262 up to ASIL B, with hardware watchdog, ECC on SRAM, and a fault collection unit. Typical applications include automotive body control modules, HVAC controllers, seat and mirror modules, lighting ECUs, basic gateway nodes with CAN FD, industrial sensor hubs, and any low-power 32-bit replacement for legacy 8/16-bit MCUs that still requires CAN, security, and AEC-Q100 compliance. When designing with this part, ensure the 5 V tolerant I/O rails do not exceed 5.5 V and provide bulk decoupling near VDDA. Place the 8 MHz external crystal within 5 mm of XTAL pins and route HSE_FUSE power correctly to enable secure boot. This page combines distributor pricing, drop-in S32K1 alternatives, and S32K118-specific design notes not available on the manufacturer summary page.

Запрос цены Контакты
FS32K142HAT0MLHT - S32K142 ARM Cortex-M4F 80MHz MCU | NXP
FS32K142HAT0MLHT

FS32K142HAT0MLHT - S32K142 ARM Cortex-M4F 80MHz MCU | NXP

The NXP FS32K142HAT0MLHT is an ARM Cortex-M4F 32-bit microcontroller from the S32K1 family, featuring an 80 MHz core, 256 KB of Flash, and housed in a 64-pin LQFP (10x10 mm) package. It is part of NXP's S32K1xx family designed for general-purpose automotive and high-reliability industrial applications. An ARM Cortex-M4F microcontroller is a 32-bit MCU built on the Arm Cortex-M4 architecture with single-precision floating-point unit (FPU) support. Within the broader taxonomy, MCUs fall under microcontrollers, which are integrated circuits containing a CPU core, memory, and peripherals on a single die. The S32K1 family specifically targets ISO 26262 functional safety applications up to ASIL B and includes a basic cryptographic security engine (CSEc) for secure communications in connected vehicles. Key features of this part include 256 KB of program Flash with 32 KB SRAM, support for CAN FD, FlexIO, I2C, LIN, SPI, and UART/USART connectivity, and integrated peripherals such as PWM, watchdog timer, and power-on reset. The device operates from a 3.3V/5V supply typical for automotive body electronics. It carries AEC-Q100 qualification for use in automotive environments with extended temperature grades. The S32K142 implements the Arm Cortex-M4F core with DSP extensions and a single-precision FPU, achieving 1.25 DMIPS/MHz (Dhrystone 2.1) and a CoreMark score consistent with the 80 MHz operating frequency. The CSEc (Cryptographic Service Engine) module provides hardware-accelerated AES-128, secure key storage, and a true random number generator for anti-tamper and secure boot applications. The FlexIO peripheral allows flexible emulation of additional UART, SPI, I2C, or PWM interfaces in software via a programmable shifter/timer architecture. Typical applications include automotive body control modules (BCM), gateway ECUs, lighting controllers, and motor control for small electric loads. The combination of CAN FD support and CSEc security makes this MCU particularly suited for next-generation in-vehicle networking nodes. When designing with this device, allocate sufficient decoupling (100 nF + bulk) near each VDD pin and follow NXP's recommended PCB layout for the 64-LQFP package. The internal voltage reference and PLL settings should be configured per the S32K1xx reference manual to ensure stable operation across the full automotive temperature range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, enabling faster BOM decisions for engineers specifying NXP S32K1xx family MCUs.

Запрос цены Контакты
FS32K144HAT0VLHT - S32K144 512KB Flash ARM Cortex-M4F MCU | NXP
FS32K144HAT0VLHT

FS32K144HAT0VLHT - S32K144 512KB Flash ARM Cortex-M4F MCU | NXP

The NXP Semiconductors FS32K144HAT0VLHT is a 32-bit ARM Cortex-M4F automotive microcontroller from the S32K1xx family, integrating 512 KB of Flash and 64 KB of SRAM, operating at up to 80 MHz, and packaged in a 64-pin LQFP (10x10 mm). It is qualified to AEC-Q100 Grade 1 (125°C junction), supports a 2.7 V to 5.5 V supply range, and is positioned for body, chassis, and powertrain applications. The S32K family is designed around ISO 26262 functional safety with safety primitives and documentation supporting ASIL-B/D system targets. An ARM Cortex-M4F microcontroller (MCU) is a 32-bit system-on-chip that integrates a Cortex-M4F CPU core with DSP instructions and single-precision FPU, on-chip memory, and a rich set of analog and digital peripherals behind a low-power bus matrix. Within the broader MCU taxonomy, Cortex-M4F sits between Cortex-M3 (no FPU) and Cortex-M7 (higher performance), targeting deterministic real-time control with floating-point math. The S32K1xx family combines this core with NXP's automotive peripherals - CAN-FD, FlexIO, eMIOS, ADC, and LinFlexD - delivering an integrated platform for safety-relevant automotive ECUs. Key features of the FS32K144HAT0VLHT include hardware cryptography support (CSEc/PKC), FlexIO emulation of additional serial interfaces, a 12-bit 1 Msps ADC, three eMIOS timer channels, three SPI, four UART/LinFlexD, two I2C, and one CAN-FD module. The on-chip PLL provides flexible clocking, and the part includes a low-power run/stop/standby mode set with fast wake-up for always-on body domains. The integrated FPU enables efficient floating-point control loops for motor control and sensor fusion. The architecture pairs the Cortex-M4F core with an FPU and DSP extensions to a low-power platform with voltage regulation on-chip, an LDO for the core domain, and a flexible peripheral bridge. The 64 LQFP pinout exposes multi-function pins and a JTAG/SWD debug interface. Security is delivered through a hardware Cryptographic Services Engine (CSEc) that accelerates AES-128 and secure boot, plus PKC for public-key operations. Typical applications include automotive body control modules (BCM), lighting ECUs, HVAC controllers, gateway nodes, battery management systems (12 V), and motor control for small DC/BLDC actuators. The wide 2.7-5.5 V input range and 125°C qualification also suit industrial and white-goods controls sharing the same automotive-grade silicon. When designing, reserve adequate decoupling (100 nF plus 4.7 µF) at each supply pin, route SWD lines away from switching nodes, and use NXP's S32 Design Studio plus the S32K1 SDK with the safety manual ASIL reference flow. Verify the 80 MHz core frequency against the latest errata for the HAT0 mask set. This page synthesizes verified distributor pricing, NXP ordering options, and engineering context that go beyond the manufacturer datasheet, providing a quick orientation point for new and existing S32K designs.

Запрос цены Контакты
FS32K144HFT0MLHT - S32K144 80MHz ARM Cortex-M4F 512KB | NXP
FS32K144HFT0MLHT

FS32K144HFT0MLHT - S32K144 80MHz ARM Cortex-M4F 512KB | NXP

The NXP Semiconductors FS32K144HFT0MLHT is an automotive-grade 32-bit microcontroller from the S32K1 family, integrating an Arm Cortex-M4F core with FPU running up to 80 MHz, 512 KB of embedded Flash, 64 KB of SRAM, and a 4 KB EEPROM emulation region. It is supplied in a 64-pin LQFP (10x10 mm) package qualified to 125°C ambient operation and supports a wide 2.7 V to 5.5 V supply range with CAN-FD, FlexIO, and a 16-channel 12-bit SAR ADC. An S32K1 microcontroller is a scalable Arm Cortex-M based MCU family targeting automotive body, chassis, and electrification applications. The family combines low-power operating modes (Halt, Stop, Standby, VLPR) with functional-safety features compliant to ISO 26262 up to ASIL B. FS32K144HFT0MLHT sits in the mid-density tier of the S32K14x sub-family, balancing Flash, peripherals, and package footprint for body controllers, sensor interfaces, and small motor drivers. Key features include: a Cortex-M4F core with single-precision FPU and DSP instructions, 512 KB program Flash with ECC, 64 KB SRAM, hardware encryption (AES-128), a 12-bit 16-channel SAR ADC with hardware trigger, two 8-bit DACs, three analog comparators, up to 64 general-purpose I/Os, FlexIO for emulating UART/SPI/I2C, three SPI, three UART/LPUART, two I2C, one FlexCAN with CAN-FD, one CAN 2.0B, and a 125°C operating junction. The device uses a low-power Arm Cortex-M4F core with an on-chip voltage regulator, brown-out reset, low-voltage detect, and a 4-channel eDMA. Hardware cryptographic acceleration, unique chip ID, and secure JTAG are integrated for OEM security needs. The 64-LQFP package exposes the full set of timers (FlexTimer/PWM/PDB) and the second CAN module, providing rich peripheral density in a moderate PCB footprint. Typical applications include automotive body control modules, BCM and gateway ECUs, lighting controllers, HVAC, seat control, immobilizer, sensor fusion front-ends, industrial PLCs, and small BLDC/PMSM motor drivers. Designers also use the S32K144 in CAN-FD sensor hubs, smart actuator ECUs, and as a primary MCU in 24V body systems where ASIL-B capability is required. Design tip: when laying out the 64-LQFP, keep the two decoupling-capacitor loops (VDD/VSS) on the top layer no longer than 3 mm to meet EMC targets in CISPR 25 Class 5. Use S32K1 SDK and the S32 Design Studio IDE to validate peripheral configurations before finalizing the BOM. This page synthesizes distributor pricing, drop-in S32K144 family alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты
FS32K144MFT0CLLT - 512KB Flash S32K144 MCU 100-LQFP | NXP
FS32K144MFT0CLLT

FS32K144MFT0CLLT - 512KB Flash S32K144 MCU 100-LQFP | NXP

The NXP Semiconductors FS32K144MFT0CLLT is an ARM Cortex-M4F automotive microcontroller in the S32K1 family, integrating 512 KB of Flash and 64 KB of SRAM on a 32-bit core that runs up to 64 MHz, housed in a 100-pin LQFP (14x14 mm) package. It targets functional-safety body and chassis applications where CAN-FD connectivity and hardware cryptography are mandatory. An automotive-grade microcontroller (MCU) is a programmable system-on-chip that integrates CPU, memory, and peripherals on a single die. MCUs sit inside the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. The Cortex-M4F core adds a single-precision FPU and DSP extensions, accelerating closed-loop control loops and sensor-fusion math at the edge without burdening the host processor. The FS32K144MFT0CLLT delivers up to 64 MHz CPU clock, 512 KB program Flash, 64 KB SRAM, 4 KB EEPROM emulation, and 3x FlexCAN with CAN-FD support. Three SPI, three UART/LPUART, two I2C, a 12-bit 1 Msps ADC, and a 16-bit FlexTimer/PWM module are included, plus a hardware cryptographic accelerator (CSEc). The 100-LQFP package exposes 79 GPIO and operates across the 2.7V-5.5V supply typical of 3.3V and 5V automotive rails. AEC-Q100 Grade 1 qualification (TA = -40C to +125C) makes it suitable for under-hood and chassis-mounted ECUs. Typical applications include automotive body domain controllers, HVAC modules, lighting/ECUs, gateway modules, and electric power steering sensor fusion. The integrated CSEc hardware security module makes it well-suited for secure boot, secure key storage, and authenticated CAN-FD communication. When designing with this MCU, allocate the 100-LQFP thermal budget for the worst-case ambient in a sealed ECU enclosure. Use the FlexTimer PWM module with the linked motor-driver companion to minimize software jitter in torque-control loops. This page consolidates distributor stock, parametric alternatives, and design considerations beyond the manufacturer datasheet summary - giving you a single source for procurement, replacement analysis, and BOM planning.

Запрос цены Контакты
FS32K144UAT0VLHT - S32K144 112MHz 512KB Flash MCU | NXP
FS32K144UAT0VLHT

FS32K144UAT0VLHT - S32K144 112MHz 512KB Flash MCU | NXP

The NXP Semiconductors FS32K144UAT0VLHT is an ARM Cortex-M4F S32K microcontroller IC operating at 32-bit, 112MHz, with 512KB (512K x 8) FLASH memory, packaged in a 64-LQFP (10x10). It is part of the S32K1xx family, a scalable 32-bit automotive microcontroller platform with Cortex-M4F core and built-in security and functional safety features. An automotive microcontroller (MCU) is a specialized microprocessor designed for use in vehicle electronic systems. Unlike general-purpose MCUs, automotive-grade MCUs must operate reliably across wide temperature ranges, withstand electrical transients, and often include functional safety mechanisms to comply with ISO 26262. The S32K1xx family is AEC-Q100 qualified and is positioned as an ultra-low-power, mixed-signal MCU targeting body electronics, chassis, and powertrain peripheral applications. Within the broader semiconductor taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include 512KB of embedded flash, 64KB SRAM, CAN FD (Flexible Data-Rate) controller, FlexIO for flexible peripheral emulation, an HSE-B cryptographic security engine, and up to 112MHz Arm Cortex-M4F core with FPU and DSP extensions. The 64-LQFP (10x10) package provides generous pin count for analog and digital I/O expansion, while integrated low-power run and standby modes suit always-on body applications. The device uses a 40nm process technology and integrates a high-speed 12-bit ADC, comparators, and configurable timer units (FlexTimer). ASIL B/D functional safety compliance is achieved through hardware redundancy and dedicated safety peripherals, enabling deployment in safety-relevant automotive subsystems. A built-in cryptographic security engine (CSEc) supports secure boot and flash security. Typical applications include automotive body control modules, gateway and CAN nodes, chassis domain controllers, battery management system (BMS) companions, industrial PLC I/O, and low-end motor control. AEC-Q100 Grade 1 qualification (-40C to +125C) makes the part suitable for under-hood and cabin automotive environments. When designing with this MCU, ensure external decoupling per the reference manual and validate CAN FD bit-timing against bus topology. The integrated FlexIO can be configured to emulate UART, I2C, SPI, or PWM peripherals when dedicated hardware is exhausted. For functional safety, follow NXP's safety manual and use the watchdog and CRC units as documented. This page synthesizes distributor pricing, drop-in S32K1 alternatives, and design notes drawn from the manufacturer reference manual - information not bundled on a single NXP or distributor page.

Запрос цены Контакты
FS32K144UIT0VLHT - S32K144 112MHz 512KB MCU, 64-LQFP | NXP
FS32K144UIT0VLHT

FS32K144UIT0VLHT - S32K144 112MHz 512KB MCU, 64-LQFP | NXP

The NXP FS32K144UIT0VLHT is a 32-bit Arm Cortex-M4F automotive-grade microcontroller from the S32K1 family, operating at up to 112 MHz with 512 KB of on-chip Flash and 64 KB SRAM, housed in a 64-pin LQFP (10x10 mm) package. It integrates one 10/100 Mbps Ethernet MAC with IEEE 1588 support, two Synchronous Audio Interface (SAI) modules, ISELED lighting drivers, and a FlexIO programmable peripheral, making it a general-purpose platform for body electronics and zonal architectures. An automotive microcontroller (MCU) is a ruggedized microprocessor designed to operate across the wider temperature, EMI, and voltage transients of vehicle electrical environments. It combines a CPU core with tightly-integrated Flash, RAM, timers, communication peripherals, and functional-safety features. The S32K1 family sits within NXP's broader automotive portfolio alongside the S32K3 and S32Z/E platforms, all targeting ASIL-B/D-capable body, chassis, and electrification domains. Key features include hardware cryptographic services (CSEc implementing the SHE functional specification), up to two CAN-FD controllers, one SPI/SCI/UART cluster, a 12-bit 1 Msps ADC with up to 32 channels, and a programmable FlexIO peripheral emulating additional UART, SPI, I2C, or I2S interfaces. The CSEc engine handles AES-128, secure key storage, and SHE-compliant boot verification for tamper-resistant firmware updates. Architecturally, the device pairs the Cortex-M4F core (single-precision FPU, DSP extensions) with a low-power Cortex-M0+ core for background housekeeping. Voltage scaling down to 2.7 V at reduced frequency lets the part enter low-power STOP/VLPS modes while retaining RAM and selected peripherals, enabling standby currents in the low-microampere region and ISO 17981 Part 7 standby compliance for body ECUs. Typical applications include automotive body domain controllers, HVAC modules, seat-control ECUs, LED lighting via ISELED, gateway modules bridging CAN-FD with Ethernet, and industrial PLCs requiring functional safety up to ASIL-B. Designers choose this part when 512 KB Flash and Ethernet connectivity are needed without stepping up to the larger 100-pin S32K144 variants.

Запрос цены Контакты
FS32K144WAT0WLFT - S32K144 80MHz 512KB Flash MCU | NXP
FS32K144WAT0WLFT

FS32K144WAT0WLFT - S32K144 80MHz 512KB Flash MCU | NXP

The NXP Semiconductors FS32K144WAT0WLFT is an automotive-grade 32-bit ARM Cortex-M4F microcontroller in the S32K1 family, delivering up to 80 MHz core performance with 512 KB of embedded Flash memory in a 48-pin LQFP (7x7 mm) package. It integrates CAN FD, LIN, FlexIO, and a hardware cryptographic security engine (CSEc) for secure on-board communications, targeting general-purpose automotive body and chassis applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and I/O on a single silicon die. Within the broader semiconductor hierarchy, an MCU is a sub-class of microcontroller -> embedded processor -> SoC -> semiconductor device. The S32K1 family further specializes in automotive-grade general-purpose MCUs (GPMs) that meet AEC-Q100 Grade 1/2 qualification, distinguishing it from industrial Cortex-M parts. The M4F core variant adds a single-precision Floating-Point Unit, easing signal-processing and sensor-fusion workloads. Key features include 64 KB SRAM, a 12-bit 1 Msps ADC with up to 16 channels, multiple timer modules (FlexTimer, eMIOS), and rich connectivity through CAN FD, LIN, SPI, UART, and I2C. The CSEc engine provides secure boot, key storage, and AES-128 acceleration, while a separate Cortex-M0+ core on select variants handles hardware security. Wide supply range (2.7 V to 5.5 V) supports both 3.3 V and 5 V automotive rails. The S32K144 architecture uses low-power modes (Halt, Stop, Run) with rapid wake-up via the ARM WFI/WFE instructions, enabling ECUs that draw <30 µA in standby while still supporting CAN wake-up. On-chip memory includes ECC on Flash and SRAM for ASIL-B functional safety support per ISO 26262. The device is qualified to AEC-Q100 Grade 1 (-40°C to +125°C), making it suitable for under-hood and body-domain modules. Typical applications include automotive body control modules (BCM), lighting controllers, seat and mirror modules, HVAC interfaces, CAN/LIN gateway nodes, and small sensor ECUs. Its combination of CAN FD, CSEc, and AEC-Q100 reliability targets the modern vehicle network where encrypted, low-latency communication and deterministic behavior are required. When designing with the FS32K144WAT0WLFT, ensure the chosen variant includes the peripherals your firmware expects - the LQFP-48 footprint limits exposed peripheral counts versus the LQFP-64 or LQFP-100 packages. Use the S32K1 SDK and configuration tools (S32 Config Tools, EB tresos) to validate pin allocation and peripheral routing before layout. This page synthesizes distributor pricing, parametric cross-reference data, and practical design notes for the FS32K144WAT0WLFT not found in the bare manufacturer datasheet.

Запрос цены Контакты
FS32K148HAT0MLLT - S32K148 Arm Cortex-M4F 80MHz MCU | NXP
FS32K148HAT0MLLT

FS32K148HAT0MLLT - S32K148 Arm Cortex-M4F 80MHz MCU | NXP

The NXP Semiconductors FS32K148HAT0MLLT is an automotive-grade 32-bit Arm Cortex-M4F microcontroller from the S32K1 family, featuring a 2 MB flash program memory, 256 KB SRAM, and an 80 MHz CPU core. It is housed in a 100-pin LQFP (14x14 mm) package qualified to the AEC-Q100 standard for body electronics and gateway applications. The device integrates dual CAN FD controllers, FlexIO, Ethernet MAC, and hardware cryptographic acceleration (CSEc) for ASIL-B functional safety use cases. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The S32K1 family specifically targets automotive and high-reliability industrial applications, so each member must combine deterministic real-time response with low-power operating modes and functional-safety features. As part of the S32K1 platform, the FS32K148HAT0MLLT positions itself between the lower-pin S32K11x and the high-pin S32K14x variants for body domain controllers, gateway ECUs, and industrial control units. Key features of this part include 2 MB (2M x 8) flash with ECC, 4 KB EEPROM emulation area, 32 channels of 12-bit SAR ADC and one 8-bit DAC, an internal oscillator, and an operating voltage range of 2.7 V to 5.5 V. Cryptographic services, secure boot, and HSE firmware are provided by the on-chip CSEc security engine, and the FlexIO peripheral can emulate additional serial interfaces. The LQFP-100 footprint offers generous ground and power pins for clean analog performance in mixed-signal designs. The Cortex-M4F core includes a single-precision FPU, DSP extensions, and a Memory Protection Unit (MPU). Combined with the tightly-coupled peripheral crossbar, this allows deterministic interrupt latency for time-critical automotive control loops. Peripherals such as FlexCAN, FlexIO, LIN, and Ethernet are wired through NXP's configurable peripheral trigger router for flexible DMA-driven I/O. Typical applications include automotive body controllers, gateway ECUs, sensor fusion nodes, industrial PLCs, and motor-control driver boards. The 2 MB flash supports large AUTOSAR applications and over-the-air (OTA) staging partitions, while the ASIL-B hardware decomposition makes it a frequent choice for chassis and powertrain subsystems. When designing with this MCU, allocate generous decoupling on every VDD/VSS pair and follow NXP S32K1 reference manual recommendations for HSE secure boot provisioning. Pin compatibility with S32K146 and S32K144 in LQFP-100 enables smooth migration along the family without PCB rework. This page synthesizes distributor pricing, pin-compatible S32K family drop-ins, and design notes that go beyond the manufacturer datasheet to support faster sourcing decisions for automotive and industrial programs.

Запрос цены Контакты
FX32K144HAT0MLLT - S32K144 80MHz ARM Cortex-M4F MCU 512KB | NXP
FX32K144HAT0MLLT

FX32K144HAT0MLLT - S32K144 80MHz ARM Cortex-M4F MCU 512KB | NXP

The NXP FX32K144HAT0MLLT is an ARM Cortex-M4F 32-bit automotive microcontroller from the S32K1 family, operating at up to 80 MHz with 512 KB of Flash and housed in a 100-pin LQFP (14x14 mm) package. According to DigiKey and NXP product pages, this MCU integrates FlexCAN, DSPI, LIN, and FlexIO connectivity, hardware security via CSEc, and functional-safety features compliant with ISO 26262 up to ASIL B for secure vehicle networking and body-control applications. An automotive microcontroller (MCU) is a specialized microprocessor designed for in-vehicle electronic systems, integrating the CPU core, Flash, SRAM, analog peripherals, and communication interfaces on a single die to meet the strict reliability, temperature, and functional-safety requirements of the automotive industry. Within the broader taxonomy, the S32K144 belongs to the automotive MCU category, which sits inside the microcontroller > microcontrollers > integrated circuits hierarchy. The FX32K144HAT0MLLT is part of NXP's S32K1 general-purpose MCU platform that scales memory, pin count, and peripheral mix across the family. Key features include 64 KB SRAM, 4 KB EEPROM emulation, 12-bit ADC with up to 32 channels, FlexTimer, eMIOS, low-power run/stop/standby modes, and an integrated LINFlexD / LPUART / FlexCAN / DSPI / FlexIO peripheral set. The wide 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V automotive rails directly without bridge trimming. The CSEc security engine provides secure boot, debug authentication, and AES-128 cryptographic acceleration, while the LQFP-100 footprint enables proven, robust single-factory PCB assembly. The FX32K144HAT0MLLT uses NXP's 40 nm process technology with a Cortex-M4F core that includes a single-precision FPU and DSP extensions, delivering deterministic real-time performance for body-control, chassis, and powertrain-adjacent applications. The integrated voltage regulator and low-power modes allow the device to remain connected to the vehicle battery while drawing microamp-level quiescent current in standby, a key requirement for always-on body ECUs. Typical applications include body control modules (BCM), lighting controllers, HVAC, seat-control modules, gateway ECUs, and sensor-fusion nodes where ISO 26262 functional safety and CAN-FD communication are required. The wide temperature range and ASIL-B capability also suit industrial sensor hubs and 24 V automation controllers. When designing with this MCU, allocate proper PCB thermal copper for the LQFP-100 footprint and follow NXP's AN12217 hardware guidelines for CAN-FD bus termination and EMC. Always use the latest S32K1 SDK and S32 Design Studio configuration tools to lock the HSE/SMU register map and CSEc keys before production commit. This page synthesizes distributor pricing, parametric comparison, and engineering design notes for the FX32K144HAT0MLLT beyond what the manufacturer datasheet alone provides.

Запрос цены Контакты
G9S12GN32F1VLCR - 16-bit S12G MCU, 32KB Flash, CAN/LIN | NXP
G9S12GN32F1VLCR

G9S12GN32F1VLCR - 16-bit S12G MCU, 32KB Flash, CAN/LIN | NXP

The NXP G9S12GN32F1VLCR is a 16-bit HCS12-based automotive microcontroller from the S12G family, integrating 32KB Flash and 2KB RAM in a 32-pin LQFP package. Built around the S12 CPU core with a bus frequency of up to 25 MHz, the device targets cost-sensitive automotive body and chassis applications while providing hardware CAN and LIN/SAE J2602 communication peripherals. The part ships in LQFP-32 surface-mount packaging with MSL-3 moisture sensitivity and Sn (tin) matte terminal finish per JESD-609 e3. Background: An automotive microcontroller is an MCU optimized for in-vehicle electronics. The S12G family is positioned below higher-tier S12XE/S12XS devices but above 8-bit HC08/HCS08 parts, balancing performance, peripheral integration, and unit cost. Within the broader taxonomy, an MCU is a programmable processor that combines CPU, memory, and I/O peripherals on a single die; the S12G specifically uses the HCS12 instruction set with BDM (Background Debug Mode) for non-intrusive in-circuit debug, which remains standard in many OEM automotive toolchains. Key features of the G9S12GN32F1VLCR include 32KB on-chip Flash, 2KB SRAM, hardware CAN 2.0A/B controller, LIN 2.x/SAE J2602 master/slave support, an enhanced capture timer (ECT), an 8-channel 10-bit ADC, and a multi-channel PWM module suitable for motor and LED control. Internal EEPROM emulation is supported through the Flash EEPROM module, and the device includes low-power stop and pseudo-stop modes for quiescent-current-sensitive body modules such as seat controllers, mirror switches, and ambient lighting. Architecture: The S12G core is a 16-bit CISC processor with a 16-bit ALU, 16-bit index registers, and a 16-bit program counter, executing the HCS12 instruction set. The 32KB Flash is organized as a single 32K x 8 array with error-correction and security-lockout features. The 2KB SRAM is split into two banks for use as back-up RAM during stop mode, allowing CAN/LIN wake-up events to retain context. The CAN module (CAN0) is Bosch C_CAN-compatible, supporting standard 11-bit and extended 29-bit identifiers, while the LIN/J2602 physical layer is implemented via the SCI serial interface plus an external LIN transceiver. Typical applications include CAN-controlled body control modules, LIN slave nodes such as seat-position switches, HVAC damper actuators, lighting ECUs, instrument clusters, and small industrial sensor-interface nodes. The combination of small footprint, on-chip CAN/LIN, and automotive qualification makes the part well-suited to node-count-heavy vehicle networks where BOM cost per node is paramount. Design considerations: The G9S12GN32F1VLCR is rated for peak reflow at 260 C for 40 s maximum per IPC JEDEC J-STD-020, with moisture sensitivity level 3 (MSL-3). The LQFP-32 footprint requires no PCB redesign relative to the rest of the S12G LQFP-32 family, enabling reuse of layout resources across derivative SKUs with different memory sizes. This page synthesizes distributor pricing, drop-in alternatives within the S12G family, and practical design notes that are not consolidated in the manufacturer datasheet alone.

Запрос цены Контакты
GD32F105VCT6 - 108MHz Cortex-M3 MCU 256KB Flash LQFP-100
GD32F105VCT6

GD32F105VCT6 - 108MHz Cortex-M3 MCU 256KB Flash LQFP-100

The GigaDevice GD32F105VCT6 is a 32-bit ARM Cortex-M3 microcontroller running up to 108 MHz with zero-wait-state Flash access, 256 KB on-chip Flash and 64 KB SRAM, housed in a 100-pin LQFP package. It integrates USB 2.0 Full-Speed OTG, two 12-bit ADCs (1 MSPS), two 12-bit DACs, and a rich set of peripherals (USART, SPI, I2C, CAN, timers) for cost-sensitive embedded designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, working memory, and I/O peripherals on a single silicon die. Within the semiconductor taxonomy, the GD32F105VCT6 sits at the hierarchy Microcontroller -> 32-bit MCU -> ARM Cortex-M3 MCU -> mainstream MCU -> GigaDevice GD32 family. It is designed as a drop-in upgrade path for STM32F103-class designs while adding USB OTG that STM32F103 lacks. Key features include 108 MHz max CPU clock with single-cycle multiply and hardware divide, a 12-bit ADC with up to 16 channels and 1 MSPS conversion rate, two 12-bit DAC channels, three general-purpose 16-bit timers plus one PWM timer, two USARTs plus two UARTs, two SPIs, two I2Cs, one USB FS OTG, one CAN 2.0B, and an operating voltage range of 2.6V to 3.6V. The device also supports external interrupts on all GPIO pins and a 7-channel DMA controller. The GD32F105VCT6 uses a 3-stage pipelined Cortex-M3 core with Thumb-2 instruction set, delivering 1.25 DMIPS/MHz (90 DMIPS at 72 MHz equivalent). Flash controller prefetch and 64-bit-wide Flash access deliver up to 50% higher CoreMark scores than competing Cortex-M3 parts at the same clock, making it well suited to real-time control loops, USB peripherals, and motor-control firmware. Typical applications include USB HID/CDC peripherals, industrial control boards, smart home gateways, motor drive controllers, consumer appliances, and cost-optimized IoT nodes. The LQFP-100 footprint matches the STM32F105/F103 100-pin layout, enabling reuse of existing PCB designs. When designing with this device, ensure the external 8 MHz HSE crystal is selected to drive the 108 MHz PLL; for USB applications a 48 MHz clock-accurate source is required. Decouple VDD/VDDA pins with 100 nF ceramics close to each pin and provide a 4.7 uF bulk capacitor for ADC noise suppression. This page synthesizes distributor pricing from LCSC and Pacific Component Xchange, drop-in alternatives from the STM32F103/F105 family, and practical design notes not consolidated in any single manufacturer document.

Запрос цены Контакты
GD32F407ZET6 - 168MHz Cortex-M4 MCU 512KB Flash | GigaDevice
GD32F407ZET6

GD32F407ZET6 - 168MHz Cortex-M4 MCU 512KB Flash | GigaDevice

The GigaDevice GD32F407ZET6 is a 32-bit high-performance microcontroller based on the Arm Cortex-M4 core operating at 168 MHz, with 512 KB on-chip Flash and 192 KB SRAM, housed in a 144-pin LQFP package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals on one die. Within the power-management and embedded-systems hierarchy, an MCU sits above discrete logic and below application processors, executing real-time control and connectivity tasks. The GD32F407 belongs to GigaDevice's GD32F4xx high-performance MCU series, a family positioned as a cost-effective, supply-secure alternative in the mainstream Cortex-M4 segment. Key features include up to three 12-bit 2.6 MSPS ADCs and two 12-bit DACs for precision analog acquisition, on-chip Ethernet MAC for industrial networking, USB HS/FS OTG for device and host modes, and CAN 2.0B for automotive and industrial fieldbus links. The core achieves Flash zero-wait-state access for maximum execution efficiency, and the peripheral set connects through two APB buses for deterministic I/O timing. Architecturally, the GD32F407xx integrates the Arm Cortex-M4 processor with its DSP and floating-point instruction extensions, enabling single-cycle MAC and hardware FPU for control-loop mathematics. Peripherals are routed through a multi-layer bus matrix that reduces arbitration contention between the core, DMA controllers, and high-bandwidth interfaces such as Ethernet and USB. Typical applications include industrial automation controllers, IoT gateways and connectivity nodes, motor drives, and communication equipment, where the combination of 168 MHz throughput, hardware Ethernet, and rich analog peripherals replaces discrete ADC and communication chips. Design consideration: apply decoupling capacitors at every VDD pin pair, and verify Flash wait-state configuration when operating the core at the full 168 MHz from the internal RC or external crystal clock source. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты
HC32L031 - 48MHz Cortex-M0+ 64KB Flash MCU | XHSC (小华)
HC32L031

HC32L031 - 48MHz Cortex-M0+ 64KB Flash MCU | XHSC (小华)

The XHSC (小华半导体) HC32L031 is a 32-bit ultra-low-power microcontroller based on the Arm Cortex-M0+ core running up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in compact LQFP-32 and QFN-32 (4x4 mm) packages. It operates from a wide 1.8 V to 5.5 V supply, making it suitable for both battery-powered and industrial 5 V rails. A low-dropout (LDO) linear regulator is an analog integrated circuit that maintains a tightly regulated output voltage even when the input-to-output voltage difference is small (the dropout voltage). LDOs belong to the broader family of linear regulators, which in turn are a subset of voltage regulators and power management ICs used in virtually every powered electronic system. The HC32L031 sits one level above: it is a microcontroller that *uses* internal LDOs to power its core and analog domains from a single external supply. Key differentiating features include a deeply engineered power management system with 0.65 µA Deep-Sleep current (all clocks off, IO retention, IO interrupt wake-up, full RAM/CPU state retention) and 45 µA/MHz active current at 3 V / 48 MHz with peripherals off. The device includes multiple low-power modes, an integrated LDO regulator, and Brown-Out Reset (BOR). Peripheral highlights include a 12-bit SAR ADC, multiple timers, UART, SPI, I²C, and an integrated LCD segment driver (variant dependent), making it highly competitive in metering and HMI applications. Architecturally, the HC32L031 leverages the Cortex-M0+ core (Thumb-2 instruction set, single-cycle IO) and pairs it with a high-efficiency on-chip voltage regulator to minimize dynamic power. The Flash is organized with erase/write protection to support secure in-field firmware updates. Typical applications include battery-powered IoT sensors, smart water/gas/heat meters, wearable health devices, low-power wireless sensor nodes, BLE/Zigbee beacon peripherals, electronic shelf labels, and consumer appliances requiring always-on sensing with multi-year battery life. Its wide 1.8 V–5.5 V input range also suits industrial 5 V control boards. When designing with the HC32L031, select the package variant (LQFP-32 F8TB or QFN-32 F8UB) that matches your PCB footprint and thermal target. Pay attention to decoupling: place 100 nF + 4.7 µF ceramic capacitors close to VDD/VSS pins to keep the internal LDO stable during load transients. This page synthesizes distributor pricing, package variants, drop-in alternatives, and practical design notes not consolidated in any single manufacturer datasheet, providing actionable engineering value for selection and procurement.

Запрос цены Контакты