Микроконтроллеры

Товары (18693)

STM32U585ZIT6 - 160MHz Cortex-M33, 2MB Flash MCU | ST
STM32U585ZIT6

STM32U585ZIT6 - 160MHz Cortex-M33, 2MB Flash MCU | ST

The STMicroelectronics STM32U585ZIT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M33 core running at 160 MHz, with 2 MB of Flash memory and 786 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. An MCU (microcontroller unit) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, sitting at the center of the embedded-system hierarchy: microcontroller -> embedded processor -> semiconductor device. The STM32U5 series belongs to ST's ultra-low-power STM32 family, and the STM32U585 line extends the STM32U575 with an integrated hardware cryptographic accelerator, making it a power-management IC plus security hub for battery-powered designs. Key features include Arm TrustZone hardware isolation, an FPU (floating-point unit) for single-precision math, 240 DMIPS of processing performance, and a rich peripheral set typical of the STM32U5 family, including multiple low-power modes for extended battery life in portable products. Architecturally, the Cortex-M33 core implements the Armv8-M mainline profile, allowing secure and non-secure code domains to coexist. The hardware crypto block offloads AES and hashing operations from software, preserving CPU cycles while meeting common security requirements for connected devices. Typical applications include battery-powered wearables and medical sensors, smart-metering and building-automation nodes, and IoT edge devices that require both long battery life and secure firmware and data handling. When designing with this device, plan power-mode transitions early: the ultra-low-power value is realized only when firmware aggressively uses stop and standby modes with the right peripheral wakeup sources. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet, with pricing and stock references as of 2026-09-06.

Запрос цены Контакты
STM32U595ZJT6 - Ultra-Low-Power Cortex-M33 MCU 160MHz 4MB Flash | STMicroelectronics
STM32U595ZJT6

STM32U595ZJT6 - Ultra-Low-Power Cortex-M33 MCU 160MHz 4MB Flash | STMicroelectronics

The STM32U595ZJT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the high-performance Arm Cortex-M33 RISC core with TrustZone and FPU. It operates at a frequency of up to 160 MHz and features 4 Mbytes of Flash memory and 2.5 Mbytes of SRAM, making it suitable for a wide range of power-sensitive applications. An ultra-low-power microcontroller (MCU) is a type of integrated circuit designed to minimize energy consumption while providing computational capabilities. It typically integrates a processor core, memory, and peripherals on a single chip, enabling battery-powered or energy-harvesting devices to operate for extended periods. The STM32U5 series represents the pinnacle of ST's ultra-low-power portfolio, offering advanced power management features such as multiple low-power modes, adaptive voltage scaling, and a highly efficient DC-DC converter. Key features of the STM32U595ZJT6 include a 160 MHz Arm Cortex-M33 core with TrustZone for hardware-enforced security, 4 Mbytes of Flash memory, 2.5 Mbytes of SRAM, and a rich set of peripherals including multiple UARTs, SPIs, I2Cs, USB, and advanced analog capabilities. The device also integrates a cryptographic accelerator, a true random number generator, and a secure boot mechanism, making it ideal for IoT and security-critical applications. From a technical perspective, the STM32U595ZJT6 leverages a 40nm process technology, enabling exceptional energy efficiency. It supports a wide supply voltage range from 1.71V to 3.6V, and its power consumption can be as low as 19 µA in standby mode with RTC. The MCU also features a Chrom-ART Accelerator for graphics, a digital filter for sigma-delta modulators, and a 14-bit ADC with hardware oversampling, providing high precision for sensor interfacing. Typical applications include smart meters, wearable devices, medical monitoring equipment, industrial sensors, and IoT edge nodes. The combination of ultra-low power, high performance, and advanced security makes it a preferred choice for designers who need to balance energy efficiency with computational capability. When designing with this device, it is crucial to pay attention to the power supply decoupling and the selection of the appropriate low-power mode to maximize battery life. The STM32CubeU5 software package provides comprehensive drivers and examples to accelerate development.

Запрос цены Контакты
STM32U599ZJT6 - Ultra-Low-Power Cortex-M33 MCU 160MHz 4MB Flash | ST
STM32U599ZJT6

STM32U599ZJT6 - Ultra-Low-Power Cortex-M33 MCU 160MHz 4MB Flash | ST

The STM32U599ZJT6 is an ultra-low-power microcontroller from STMicroelectronics' STM32U5 series, built around the high-performance Arm Cortex-M33 32-bit RISC core with TrustZone and FPU. It operates at up to 160 MHz and integrates 4 MB of Flash memory and 2.5 MB of SRAM, making it suitable for a wide range of power-conscious embedded applications. The device is available in a 144-pin LQFP package (20x20 mm) and supports a supply voltage range of 1.71 V to 3.6 V, with an operating temperature range of -40°C to +85°C or +125°C depending on the variant. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals. The STM32U5 series represents the ultra-low-power segment of STM32 MCUs, targeting battery-powered and energy-harvesting applications where power efficiency is critical. The Cortex-M33 core adds TrustZone security and DSP instructions, positioning this MCU within the broader hierarchy of Arm-based embedded processors, from simple 8-bit MCUs to high-end application processors. Key features of the STM32U599ZJT6 include the Arm Cortex-M33 core with TrustZone, a floating-point unit (FPU), 4 MB of dual-bank Flash memory, and 2.5 MB of SRAM. It supports a rich set of peripherals, including multiple UART, SPI, I2C, USB, and advanced analog features such as a 14-bit ADC. The device also integrates a Chrom-ART Accelerator for graphics and a hardware cryptographic accelerator, enhancing its suitability for secure and display-oriented applications. The ultra-low-power design incorporates FlexPowerControl, allowing independent power domains and low-power background autonomous mode (LPBAM) for peripherals with DMA. From a technical depth perspective, the STM32U599ZJT6 leverages ST's patented ultra-low-power technology, achieving exceptional energy efficiency. The Cortex-M33 core with TrustZone provides hardware-enforced security, isolating critical code and data. The device includes a rich set of communication interfaces, including Ethernet, USB OTG, and CAN FD, enabling connectivity in industrial and IoT applications. The 144-pin LQFP package offers a balance between I/O count and board space, with a thermal resistance suitable for moderate power dissipation. Typical applications include smart meters, medical devices, wearable electronics, and industrial sensors. The ultra-low-power consumption and advanced security features make it ideal for battery-powered devices that require long operational life and secure data handling. The high Flash and SRAM capacities support complex firmware and real-time operating systems. When designing with this MCU, careful attention to power supply decoupling and PCB layout is essential to achieve the specified low-power performance. The device supports multiple low-power modes, and designers should leverage the LPBAM feature to minimize power consumption in standby states. Additionally, the TrustZone security features require proper configuration to ensure secure boot and runtime isolation.

Запрос цены Контакты
STM32WB30CEU6 - 2.4GHz Wireless MCU with BLE 5.0 | STMicroelectronics
STM32WB30CEU6

STM32WB30CEU6 - 2.4GHz Wireless MCU with BLE 5.0 | STMicroelectronics

The STM32WB30CEU6 is a dual-core wireless microcontroller from STMicroelectronics, integrating a 32-bit Arm Cortex-M4 application processor running at 64 MHz and a dedicated Arm Cortex-M0+ network processor for the 2.4 GHz radio stack. It supports Bluetooth Low Energy 5.0, 802.15.4 (Zigbee, Thread), and proprietary 2.4 GHz protocols, making it a versatile solution for IoT and smart connected devices. The device is housed in a 48-pin UFQFPN package (7x7 mm) with an exposed pad, offering a compact footprint for space-constrained designs. A wireless MCU (Microcontroller Unit) is a system-on-chip that combines a general-purpose microcontroller core with an integrated radio transceiver, enabling wireless communication without external RF chips. In the system hierarchy, a wireless MCU sits above a standalone MCU and below a full application processor, providing a balance of processing power, connectivity, and low power consumption. The STM32WB30CEU6 exemplifies this category by pairing a powerful Cortex-M4 for application code with a Cortex-M0+ that offloads the real-time radio stack, ensuring deterministic wireless performance. Key features include 512 KB of flash memory and 96 KB of SRAM, sufficient for complex applications and over-the-air (OTA) updates. The radio supports BLE 5.0 with 2 Mbps data rate, long range, and advertising extensions, as well as Zigbee 3.0 and Thread for mesh networking. The device operates from 1.71V to 3.6V, with multiple low-power modes including Sleep, Stop, and Standby, consuming as low as 1.6 uA in Standby mode with RTC. It also integrates a 12-bit ADC, multiple timers, and a rich set of communication interfaces (SPI, I2C, USART, LPUART). The dual-core architecture is a key differentiator: the Cortex-M0+ runs the wireless protocol stack (e.g., BLE stack) independently, while the Cortex-M4 runs the user application. This separation improves real-time performance and simplifies certification. The device also features a hardware cryptographic accelerator (AES-256) and a true random number generator (TRNG) for secure connections. Typical applications include smart home devices (sensors, locks, lighting), industrial wireless sensors, healthcare wearables, and asset tracking. The integrated radio and low power consumption make it ideal for battery-powered IoT nodes that require long battery life and reliable wireless connectivity. When designing with the STM32WB30CEU6, pay attention to the RF layout: use a 32 MHz crystal for the radio and a 32.768 kHz crystal for the RTC, and ensure a clean ground plane under the antenna. The device supports firmware updates via the built-in bootloader, simplifying field updates.

Запрос цены Контакты
STM32WB30CEU7 - 2.4GHz Dual-Core Wireless MCU | STMicroelectronics
STM32WB30CEU7

STM32WB30CEU7 - 2.4GHz Dual-Core Wireless MCU | STMicroelectronics

The STM32WB30CEU7 is a dual-core wireless microcontroller from STMicroelectronics, combining an Arm Cortex-M4 application processor running at 64 MHz with a dedicated Arm Cortex-M0+ network processor for Bluetooth Low Energy 5.0 and 802.15.4 (Zigbee, Thread) connectivity. It is housed in a 48-pin UFQFPN package (7x7 mm) and offers 512 KB of flash memory and 96 KB of SRAM, making it suitable for a wide range of IoT and smart connected devices. A wireless MCU (Microcontroller Unit) integrates a general-purpose processor with a radio transceiver on a single chip, enabling embedded systems to communicate wirelessly without external RF components. The STM32WB30CEU7 belongs to the STM32WB series, which is part of the broader STM32 family of 32-bit Arm Cortex-M microcontrollers. This architecture allows developers to leverage the rich STM32 ecosystem, including STM32CubeMX, STM32CubeWB firmware packages, and extensive middleware support for BLE and Zigbee protocols. Key features of the STM32WB30CEU7 include a 2.4 GHz radio supporting BLE 5.0 (with 2 Mbps, long range, and advertising extensions) and 802.15.4 (Zigbee 3.0, Thread), a 12-bit ADC with up to 16 channels, multiple communication interfaces (USART, SPI, I2C, USB 2.0 FS), and a rich set of timers. The dual-core architecture offloads real-time radio stack processing to the Cortex-M0+, freeing the Cortex-M4 for application code, which improves system responsiveness and power efficiency. The device operates from a 1.71V to 3.6V supply and features multiple low-power modes, including Sleep, Stop, and Standby, with typical current consumption as low as 2.8 uA in Stop mode with RTC. The integrated SMPS (Switched-Mode Power Supply) can be enabled to reduce RF power consumption, making it ideal for battery-powered devices. The radio achieves a sensitivity of -96 dBm for BLE and -100 dBm for 802.15.4, ensuring reliable communication in challenging environments. Typical applications include smart home devices (sensors, locks, lighting), industrial wireless sensor networks, healthcare wearables, and asset tracking. The STM32WB30CEU7 is also supported by the STM32Cube ecosystem, which provides a comprehensive set of tools, middleware, and examples to accelerate development. When designing with this device, pay attention to the RF layout: use a proper ground plane, place decoupling capacitors close to the supply pins, and follow the antenna design guidelines in the datasheet. The device requires a 32.768 kHz crystal for the RTC and a 32 MHz crystal for the radio, both of which must be placed near the corresponding pins to minimize parasitic capacitance.

Запрос цены Контакты
STM32WB35CEU6 - 2.4GHz Wireless MCU with BLE 5.4 | STMicroelectronics
STM32WB35CEU6

STM32WB35CEU6 - 2.4GHz Wireless MCU with BLE 5.4 | STMicroelectronics

The STM32WB35CEU6 is a dual-core wireless microcontroller from STMicroelectronics, integrating a 64 MHz Arm Cortex-M4 application processor and a 32 MHz Arm Cortex-M0+ radio processor in a single UFQFPN-48 package. It supports Bluetooth Low Energy 5.4 and 802.15.4 (Zigbee, Thread) protocols, making it a versatile solution for IoT, smart home, and industrial wireless applications. A wireless MCU is a microcontroller that combines a general-purpose processing core with a radio transceiver on a single chip, enabling wireless communication without external RF components. The STM32WB35CEU6 belongs to the STM32WB series, which is part of the broader STM32 family of 32-bit Arm Cortex-M microcontrollers. This integration reduces system cost, board space, and design complexity compared to discrete MCU-plus-radio solutions. Key features include 512 KB of flash memory and 128 KB of SRAM, providing ample space for application code and data. The device operates from 1.71V to 3.6V supply voltage and supports an extended temperature range of -40°C to +85°C. It includes a rich set of peripherals: 12-bit ADC, multiple timers, USART, SPI, I2C, and a USB 2.0 FS interface. The radio subsystem delivers +6 dBm output power and -96 dBm sensitivity for BLE, ensuring reliable wireless links. The dual-core architecture allows the Cortex-M0+ to handle the radio stack independently, offloading the main Cortex-M4 core for application processing. This separation improves real-time performance and reduces power consumption. The device also features a TrustZone-compatible secure enclave (via STM32CubeWB firmware) for secure key storage and authentication, enhancing IoT security. Typical applications include smart home devices (sensors, locks, lighting), industrial wireless sensor networks, healthcare wearables, and asset tracking. The integrated radio and rich peripherals enable compact, low-power designs. For example, in a smart thermostat, the STM32WB35CEU6 can manage temperature sensing, display control, and BLE communication with a smartphone app. When designing with this device, pay attention to antenna matching and PCB layout for optimal RF performance. Use the reference design from ST's application notes (e.g., AN5185) for the balun and antenna. Also, ensure proper decoupling of the supply pins and follow the recommended power sequencing to avoid latch-up.

Запрос цены Контакты
STM32WB50CGU6 - Dual-Core Wireless MCU BLE 5.0 | STMicroelectronics
STM32WB50CGU6

STM32WB50CGU6 - Dual-Core Wireless MCU BLE 5.0 | STMicroelectronics

The STM32WB50CGU6 is a dual-core wireless microcontroller from STMicroelectronics, integrating a 32-bit Arm Cortex-M4 application processor running at 64 MHz and a dedicated Arm Cortex-M0+ network processor for Bluetooth Low Energy (BLE) 5.0 and IEEE 802.15.4 wireless protocols. It comes in a UFQFPN-48 (7x7 mm) package, offering a compact solution for connected embedded applications. A wireless MCU (Microcontroller Unit) is a system-on-chip that combines a general-purpose microcontroller core with a radio transceiver, enabling wireless communication in embedded systems. The STM32WB50CGU6 belongs to the STM32WB series, which is part of the broader STM32 family of 32-bit Arm Cortex-M microcontrollers. This hierarchy places it within the categories of wireless microcontrollers, microcontrollers, and embedded processors, making it a key component in the Internet of Things (IoT) ecosystem. Key features include 1 Mbyte of flash memory and 128 Kbytes of SRAM, providing ample storage for application code and data. The device supports BLE 5.0 with a data rate of 2 Mbps, along with Zigbee 3.0 and Thread protocols via IEEE 802.15.4. It operates from a 1.71V to 3.6V supply, with a typical current consumption of 4.5 mA in RX mode and 4.5 mA in TX mode at 0 dBm. The integrated balun eliminates the need for external RF matching components, simplifying PCB design. The dual-core architecture allows the Cortex-M0+ to handle the wireless protocol stack independently, offloading the main Cortex-M4 core for application processing. This separation enhances real-time performance and reduces power consumption. The device includes a rich set of peripherals, including UART, SPI, I2C, ADC, timers, and GPIOs, along with hardware cryptographic acceleration (AES, RSA, ECC) for secure communication. Typical applications include smart home devices, industrial wireless sensors, healthcare wearables, and asset tracking systems. The STM32WB50CGU6 is particularly suited for battery-powered devices due to its low power consumption and support for multiple low-power modes, including Stop and Standby modes. When designing with this device, ensure proper antenna layout and RF decoupling to achieve optimal wireless performance. The device requires a 32 MHz crystal for the RF subsystem and a 32.768 kHz crystal for the RTC, which should be placed close to the respective pins. Additionally, the supply voltage must be decoupled with a 100 nF capacitor near each VDD pin to minimize noise.

Запрос цены Контакты
STM32WB55CEU6 - Dual-Core Wireless MCU with BLE 5.4 | STMicroelectronics
STM32WB55CEU6

STM32WB55CEU6 - Dual-Core Wireless MCU with BLE 5.4 | STMicroelectronics

The STMicroelectronics STM32WB55CEU6 is a dual-core wireless microcontroller that integrates a 64 MHz Arm Cortex-M4 application processor with a 32 MHz Arm Cortex-M0+ radio processor, enabling concurrent Bluetooth Low Energy 5.4 and IEEE 802.15.4 (Zigbee, Thread) connectivity. It comes in a 48-pin UFQFPN package (7x7 mm) and offers 512 KB of flash memory and 128 KB of SRAM, making it suitable for a wide range of IoT, smart home, and industrial wireless applications. A wireless MCU (Microcontroller Unit) is a system-on-chip that combines a general-purpose microcontroller core with a radio transceiver, allowing embedded systems to communicate wirelessly without external host processors. In the system hierarchy, the STM32WB55CEU6 sits at the application processor level, managing both the user application and the wireless protocol stack, with the Cortex-M0+ core dedicated to real-time radio tasks. This dual-core architecture offloads the main CPU, ensuring deterministic wireless performance and lower power consumption. Key features include a 2.4 GHz radio supporting BLE 5.4, Zigbee 3.0, and Thread, with a transmit power of up to +6 dBm and a receiver sensitivity of -96 dBm for BLE. The device supports a supply voltage range of 1.71V to 3.6V, with multiple low-power modes including Sleep, Stop, and Standby, achieving as low as 1.62 uA in Standby mode with RTC. It also integrates a rich set of peripherals: 12-bit ADC, multiple timers, USART, SPI, I2C, USB 2.0 FS, and a Touch Sensing controller. The STM32WB55CEU6 is built on ST's ultra-low-power technology, featuring a proprietary radio IP that balances performance and energy efficiency. The dual-core design allows the Cortex-M0+ to handle the wireless protocol stack independently, while the Cortex-M4 runs the application, reducing software complexity and improving real-time responsiveness. The device also includes a hardware cryptographic accelerator (AES-256) and a true random number generator (TRNG) for secure wireless communication. Typical applications include smart home hubs, wireless sensor nodes, asset tracking beacons, and industrial IoT gateways. Its support for multiple wireless protocols in a single chip makes it ideal for products that need to bridge BLE and Zigbee/Thread networks. The integrated USB and rich analog peripherals further expand its use in portable medical devices and wearable electronics. When designing with this device, pay attention to the RF layout: use a 50-ohm impedance-controlled antenna trace and place decoupling capacitors close to the VDD pins. The dual-core architecture requires careful firmware partitioning to avoid resource contention between the two cores. Also, ensure the supply voltage stays within 1.71V to 3.6V and consider using the SMPS (switched-mode power supply) mode for improved efficiency in battery-powered designs.

Запрос цены Контакты
STM32WB55VCQ6 - Dual-Core 64MHz Wireless MCU | STMicroelectronics
STM32WB55VCQ6

STM32WB55VCQ6 - Dual-Core 64MHz Wireless MCU | STMicroelectronics

The STMicroelectronics STM32WB55VCQ6 is a multiprotocol wireless 32-bit MCU with a 64 MHz Arm Cortex-M4 core with FPU, a dedicated 32 MHz Cortex-M0+ core, and a 2.405 GHz to 2.48 GHz radio in a 129-UFBGA package. It supports Bluetooth Low Energy, IEEE 802.15.4-2011, Bluetooth v5.3, Thread, and Zigbee according to the verified distributor and manufacturer sources. A wireless system-on-chip combines a microcontroller, radio, memory, and security-related peripherals on one integrated device. In the STM32WB family, the Cortex-M4 executes application software while the Cortex-M0+ handles real-time low-level radio operations. This architecture is intended for low-power Bluetooth and IEEE 802.15.4 products, including sensor nodes, industrial wireless devices, connected controls, and energy-conscious portable equipment. The verified data identifies a 256 Kbyte memory configuration, a 64 MHz Cortex-M4 operating frequency, a 32 MHz Cortex-M0+ frequency, a 2405 MHz to 2480 MHz operating band, and a maximum data rate of 2000 kbps. The radio specification includes -100 dBm sensitivity and 6 dBm output power. These figures make the device suitable for short-range wireless links where compactness, low power, and integrated protocol support matter. The STM32WB55VCQ6 is identified as an ultra-low-power dual-core MCU with Bluetooth LE capability and RF functionality. Its wireless feature set combines Bluetooth Low Energy and 802.15.4 radio support in one package, reducing the need for separate radio components in compatible designs. Protocol availability and exact feature activation must still be checked against the manufacturer datasheet and product documentation for the selected firmware configuration. Typical applications include Bluetooth Low Energy wearables, industrial sensor networks, smart-building controls, wireless remote devices, Thread-connected equipment, and Zigbee products. The integrated dual-core design can help separate real-time radio tasks from application processing, while the 2.4 GHz radio supports common short-range wireless standards. Designers should pay attention to the 129-UFBGA package, required power-supply decoupling, RF layout practices, antenna implementation, and the device's specified operating temperature range of -40 C to +85 C. Verify all pin assignments and exposed-pad connections against the official datasheet before layout or production substitution. This page consolidates the verified manufacturer and distributor references, exact available pricing information, package and pinout requirements, protocol capabilities, and engineering-oriented selection guidance for STM32WB55VCQ6.

Запрос цены Контакты
STM32WLE5JC - 32-bit Arm Cortex-M4 LoRa SoC | STMicroelectronics
STM32WLE5JC

STM32WLE5JC - 32-bit Arm Cortex-M4 LoRa SoC | STMicroelectronics

The STMicroelectronics STM32WLE5JC is a 32-bit Arm Cortex-M4 microcontroller with integrated LoRa transceiver, designed for long-range, low-power wireless applications. It operates at up to 48 MHz and features 256 KB of flash memory and 64 KB of SRAM. The device is housed in a 48-pin UFQFPN package (7x7 mm) and supports a supply voltage range of 1.8V to 3.6V. A System-on-Chip (SoC) integrates a microcontroller core with a radio transceiver on a single die, enabling compact and cost-effective designs for IoT and smart agriculture. The STM32WLE5JC combines an Arm Cortex-M4 core with a LoRa (Long Range) modem, providing sub-GHz wireless connectivity with excellent sensitivity and low power consumption. This integration reduces system complexity and bill of materials compared to discrete MCU + radio solutions. Key features include a LoRa modem supporting frequencies from 150 MHz to 960 MHz, a transmit power of up to +22 dBm, and a receiver sensitivity of -123 dBm at 10.4 kbps. The device also includes an AES-256 hardware encryption engine, a true random number generator (TRNG), and multiple low-power modes including Sleep, Stop, and Standby. The integrated SMPS (switched-mode power supply) enhances efficiency, reducing current consumption to as low as 1.4 uA in Standby mode with RTC. The STM32WLE5JC is built on ST's advanced 40nm process technology, balancing performance and power efficiency. The Arm Cortex-M4 core with FPU (floating-point unit) and DSP instructions enables complex signal processing, while the LoRa modem handles spread-spectrum modulation for robust long-range communication. The device supports both LoRa and (G)FSK modulation, offering flexibility for various wireless protocols. Typical applications include smart agriculture (soil moisture monitoring, livestock tracking), smart metering (gas, water, electricity), asset tracking, and industrial IoT sensors. The long-range capability and low power consumption make it ideal for battery-powered devices requiring years of operation. The integrated radio eliminates the need for external RF components, simplifying PCB design and reducing time-to-market. When designing with the STM32WLE5JC, pay attention to the RF matching network and antenna design to achieve optimal range. The device requires a 32 MHz crystal for the radio and a 32.768 kHz crystal for the RTC. Proper decoupling of the supply pins and a clean ground plane are essential for reliable RF performance. The SMPS can be configured to optimize efficiency versus noise trade-offs.

Запрос цены Контакты
STM8AF5266TCY - Automotive 8-bit MCU, 64KB Flash, 24MHz | STMicroelectronics
STM8AF5266TCY

STM8AF5266TCY - Automotive 8-bit MCU, 64KB Flash, 24MHz | STMicroelectronics

The STM8AF5266TCY is an automotive-grade 8-bit microcontroller from STMicroelectronics, featuring a 24 MHz CPU core, 64 Kbytes of Flash memory, and integrated true data EEPROM. It is housed in a 32-pin LQFP package with gull-wing terminals, providing a compact solution for automotive body electronics and industrial control applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a processor core, memory, and programmable input/output peripherals. In the automotive domain, 8-bit MCUs like the STM8AF5266TCY serve as the 'brain' of electronic control units (ECUs), managing functions such as window lifts, seat control, and lighting. They sit within the broader hierarchy of embedded processing, from simple 4-bit controllers to complex 32-bit systems-on-chip, offering a balance of cost, power efficiency, and real-time responsiveness for dedicated control tasks. Key features of the STM8AF5266TCY include 25 I/O lines, 10-bit ADC channels, PWM channels, and a rich set of communication interfaces including LIN, CAN, USART, SPI, and I2C. The device operates over a supply voltage range of 3V to 5.5V, making it suitable for direct battery connection in automotive environments. The integrated true data EEPROM allows for non-volatile data storage without external components, simplifying system design and reducing BOM cost. The STM8AF5266TCY is built on ST's advanced 8-bit core architecture, which delivers up to 20 MIPS at 24 MHz, providing ample processing headroom for real-time control loops. The inclusion of a CAN controller enables robust communication in automotive networks, while the LIN interface supports lower-cost sub-networks for body electronics. The device also features a 10-bit ADC with multiple channels, enabling direct sensor interfacing for temperature, position, and current sensing. Typical applications include automotive body control modules, lighting control, seat and mirror adjustment, and industrial automation. The wide operating voltage range and automotive qualification make it a reliable choice for harsh environments. For designs requiring higher memory, the STM8AF52A9TCY offers 128 Kbytes of Flash in the same package, providing a scalable upgrade path. When designing with this MCU, ensure proper decoupling of the power supply pins and consider the thermal characteristics of the LQFP-32 package. The device supports in-application programming (IAP) and in-circuit debugging, facilitating firmware updates and system diagnostics in the field.

Запрос цены Контакты
STM8AF5268TCY - 8-bit Automotive MCU, 32KB Flash, LQFP48 | STMicroelectronics
STM8AF5268TCY

STM8AF5268TCY - 8-bit Automotive MCU, 32KB Flash, LQFP48 | STMicroelectronics

The STM8AF5268TCY is an 8-bit automotive-grade microcontroller from STMicroelectronics, based on the STM8A core. It operates at a maximum frequency of 24 MHz and provides 32 KB of Flash program memory, 2 KB of RAM, and 1 KB of EEPROM. The device is housed in a 48-pin LQFP package (7x7 mm) and is designed for a wide range of automotive body and chassis applications. An 8-bit microcontroller (MCU) is a compact integrated circuit that executes instructions on 8-bit data words, typically used for control-oriented tasks in embedded systems. The STM8A core is an enhanced 8-bit architecture with a three-stage pipeline, offering high code density and efficient execution for cost-sensitive automotive modules. As a member of the STM8AF series, this MCU sits within the broader hierarchy of microcontrollers, which are themselves a subset of integrated circuits used in electronic control units (ECUs) across the automotive industry. Key features include a rich set of peripherals: two UARTs, two SPI interfaces, two I2C interfaces, a 10-bit ADC with up to 16 channels, multiple 16-bit timers, and a CAN 2.0B controller. The device supports a supply voltage range of 3.0V to 5.5V, making it compatible with both 3.3V and 5V systems. It also includes an internal 16 MHz RC oscillator and a low-power RTC, reducing external component count. The automotive qualification (AEC-Q100 Grade 1) ensures operation from -40°C to +150°C ambient temperature, suitable for under-hood environments. The STM8AF5268TCY is built on a robust 130nm embedded Flash process, providing high reliability and endurance (up to 100k write/erase cycles). The CAN controller supports both 2.0A and 2.0B protocols, enabling seamless integration into vehicle networks. The device also features a 10-bit ADC with programmable sampling time, which is essential for accurate sensor readings in engine management and battery monitoring. Typical applications include body control modules (BCM), door and window control, seat control, HVAC (heating, ventilation, and air conditioning) systems, and lighting control. Its CAN interface makes it ideal for distributed automotive networks, while the low-power modes (Halt, Active-Halt, Wait) help meet stringent quiescent current requirements in battery-backed systems. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100nF capacitors placed close to the device. The internal RC oscillator is factory-calibrated to ±1% accuracy, but for applications requiring higher precision, an external crystal can be connected to the OSC_IN/OSC_OUT pins. The device supports in-application programming (IAP) via the bootloader, simplifying firmware updates in the field.

Запрос цены Контакты
STM8AF5286TCY - 8-bit Automotive MCU, 64KB Flash, LQFP64 | STMicroelectronics
STM8AF5286TCY

STM8AF5286TCY - 8-bit Automotive MCU, 64KB Flash, LQFP64 | STMicroelectronics

The STMicroelectronics STM8AF5286TCY is an 8-bit automotive-grade microcontroller based on the STM8A core, operating at up to 24 MHz. It features 64 KB of Flash program memory, 6 KB of RAM, and 2 KB of EEPROM, all in a 64-pin LQFP package. This device is designed for automotive body electronics, motor control, and safety-critical applications, with an extended temperature range of -40°C to +150°C and AEC-Q100 qualification. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a subset of the broader microcontroller family, which includes 16-bit and 32-bit devices. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, lower power consumption, and simpler architecture, making it ideal for cost-sensitive, high-volume automotive and industrial applications. The STM8A core is an enhanced 8-bit architecture with a three-stage pipeline, delivering up to 20 MIPS at 24 MHz. Key features include a 24 MHz maximum CPU frequency, 64 KB Flash with read-while-write capability, 6 KB SRAM, and 2 KB true EEPROM with up to 300k write/erase cycles. The device integrates a 10-bit ADC with up to 16 channels, two 16-bit timers, one 8-bit timer, a UART, SPI, and I2C interfaces. It also includes a CAN 2.0B controller, making it suitable for automotive networking. The LQFP64 package provides 52 I/O pins, with 5V-tolerant inputs for direct interfacing with legacy automotive sensors and actuators. The STM8AF5286TCY is built on ST's proprietary 130nm embedded Flash process, which balances performance, power efficiency, and reliability. The core operates from a 3.3V to 5V supply, with a low-power mode consuming as little as 1 µA in halt mode. The device includes a comprehensive set of safety features, including a window watchdog, clock security system, and a cyclic redundancy check (CRC) unit, supporting ISO 26262 ASIL-B functional safety requirements. Typical applications include automotive body control modules (BCM), power window and seat control, HVAC control, and motor control for pumps and fans. The CAN interface enables communication with the vehicle's network, while the robust I/O and wide temperature range ensure reliable operation in harsh environments. The device is also used in industrial automation and smart sensors where automotive-grade reliability is required. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100nF and 4.7µF capacitors. The NRST pin requires an external pull-up resistor and a capacitor for reliable reset. For CAN communication, a CAN transceiver such as the TJA1051 is required. The device supports in-application programming (IAP) via the UART or CAN, enabling firmware updates in the field.

Запрос цены Контакты
STM8AF5288TCY - 8-bit Automotive MCU, 64KB Flash, 24MHz | STMicroelectronics
STM8AF5288TCY

STM8AF5288TCY - 8-bit Automotive MCU, 64KB Flash, 24MHz | STMicroelectronics

The STM8AF5288TCY is an 8-bit automotive-grade microcontroller from STMicroelectronics, based on the high-performance STM8A core. It operates at a maximum frequency of 24 MHz and provides 64 KB of Flash program memory, 6 KB of RAM, and 2 KB of EEPROM. The device is housed in a 48-pin LQFP package (7x7 mm) and is designed for a wide range of automotive body and chassis applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a CPU, memory, and peripherals. In the automotive domain, 8-bit MCUs like the STM8AF5288TCY are widely used for cost-sensitive, real-time control tasks such as window lift, wiper control, and lighting modules. They offer a balance of performance, power efficiency, and deterministic behavior, making them ideal for safety-critical and time-constrained applications. Key features of the STM8AF5288TCY include a 24 MHz CPU clock, 64 KB Flash with read-while-write capability, 6 KB SRAM, and 2 KB true data EEPROM with up to 300k write/erase cycles. It integrates a 10-bit ADC with up to 16 channels, multiple timers (including a 16-bit advanced control timer), and standard communication interfaces such as SPI, I2C, and UART. The device also features a CAN 2.0B controller, making it suitable for in-vehicle networking. The STM8A core is based on a Harvard architecture with a 3-stage pipeline, achieving up to 20 MIPS at 24 MHz. It includes an extended instruction set with hardware multiply and divide, and supports a wide operating voltage range of 3.0V to 5.5V. The MCU is AEC-Q100 qualified (Grade 1, -40°C to +125°C), ensuring reliable operation in harsh automotive environments. Typical applications include body control modules, door modules, seat control, HVAC control, and lighting systems. The integrated CAN interface enables communication with other ECUs in the vehicle network, while the rich timer and ADC peripherals support motor control and sensor interfacing. When designing with this MCU, ensure proper decoupling of the power supply pins and a clean ground plane. The EEPROM endurance of 300k cycles allows frequent data logging, but careful management of write operations is recommended to maximize lifetime. For safety-critical applications, the built-in watchdog timer and clock security system should be enabled.

Запрос цены Контакты
STM8AF5289TCY - 8-bit Automotive MCU, 128KB Flash | STMicroelectronics
STM8AF5289TCY

STM8AF5289TCY - 8-bit Automotive MCU, 128KB Flash | STMicroelectronics

The STM8AF5289TCY is an 8-bit automotive-grade microcontroller from STMicroelectronics, featuring a high-performance STM8A core running at up to 24 MHz. It integrates 128 KB of Flash program memory, 6 KB of RAM, and 2 KB of EEPROM, making it suitable for body control modules, motor control, and other automotive applications. The device operates over a supply voltage range of 3.0V to 5.5V and is available in a 64-pin LQFP package. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, typically used for embedded control applications. It integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals such as timers, ADCs, and communication interfaces. In the automotive domain, 8-bit MCUs like the STM8AF series provide a cost-effective solution for real-time control tasks, bridging the gap between simple logic ICs and more complex 32-bit processors. They are part of the broader microcontroller hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> integrated circuit. Key features of the STM8AF5289TCY include a 24 MHz maximum CPU frequency, 128 KB Flash with read-while-write capability, 6 KB SRAM, and 2 KB true EEPROM with up to 300k write/erase cycles. It offers a rich set of peripherals: two 16-bit timers, one 8-bit timer, a 12-bit ADC with up to 16 channels, and multiple communication interfaces including SPI, I2C, UART, and LIN. The device is AEC-Q100 qualified, ensuring reliability for automotive environments, and operates over a temperature range of -40°C to +150°C. Technically, the STM8A core is based on a Harvard architecture with a 3-stage pipeline, achieving up to 20 MIPS at 24 MHz. The Flash memory supports in-application programming (IAP) and in-circuit programming (ICP), enabling firmware updates in the field. The EEPROM is separate from Flash, allowing data storage without affecting program memory. The device includes a comprehensive set of safety features, such as a watchdog timer, clock security system, and low-voltage detection, which are essential for automotive safety-critical applications. Typical applications include automotive body control modules (BCM), window lift and mirror control, HVAC control, and motor control for pumps and fans. The STM8AF5289TCY's robust communication interfaces (LIN, SPI, I2C, UART) make it ideal for in-vehicle networking, while its high-temperature rating and AEC-Q100 qualification ensure reliable operation under harsh conditions. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100nF capacitors placed close to the pins. The NRST pin requires a 100nF capacitor to ground for reliable reset. For automotive applications, consider using the internal watchdog and clock security system to enhance system reliability. The device supports low-power modes (Wait, Active-Halt, Halt) to reduce current consumption in standby conditions.

Запрос цены Контакты
STM8AF52AATCY - 8-bit Automotive MCU, 128KB Flash, LQFP64 | STMicroelectronics
STM8AF52AATCY

STM8AF52AATCY - 8-bit Automotive MCU, 128KB Flash, LQFP64 | STMicroelectronics

The STMicroelectronics STM8AF52AATCY is an 8-bit automotive-grade microcontroller based on the STM8A core, operating at up to 24 MHz. It features 128 KB of Flash program memory, 6 KB of RAM, and 2 KB of EEPROM, all in a 64-pin LQFP package. This device is designed for automotive body electronics, motor control, and safety-critical applications, offering a robust set of peripherals including CAN, LIN, SPI, I2C, UART, and a 10-bit ADC. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, typically used for embedded control applications where cost, power, and simplicity are prioritized over raw processing power. The STM8A core is an enhanced 8-bit architecture with a three-stage pipeline, allowing most instructions to execute in a single clock cycle. This places the STM8AF52AATCY in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor, and it competes with other 8-bit automotive MCUs like the Renesas RL78 and Microchip PIC18 families. Key features include a wide operating voltage range of 3.0V to 5.5V, an operating temperature range of -40°C to +150°C (AEC-Q100 Grade 0), and a rich set of communication interfaces. The integrated CAN 2.0B controller and LIN support make it ideal for automotive networking. The 10-bit ADC with up to 16 channels enables precise sensor monitoring, while the advanced timer peripherals support PWM generation for motor control. The device also includes a true EEPROM with up to 300k write/erase cycles, eliminating the need for external EEPROM in many designs. Architecturally, the STM8AF52AATCY uses a Harvard architecture with separate program and data memory buses, allowing simultaneous instruction fetch and data access. The core includes a 24-bit program counter, 16-bit stack pointer, and a rich instruction set optimized for control applications. The Flash memory is organized into 128 KB with read-while-write capability, enabling firmware updates without halting the system. The device also features a flexible clock system with internal and external oscillators, including a low-power RC oscillator for standby modes. Typical applications include automotive body control modules (BCM), power window and seat control, HVAC systems, and motor control for pumps and fans. The CAN interface allows seamless integration into vehicle networks, while the LIN interface supports low-cost sub-networks. The wide temperature range and AEC-Q100 qualification ensure reliable operation in harsh automotive environments. When designing with this MCU, pay attention to the power supply decoupling: place a 100nF capacitor close to each VDD pin and a 4.7uF bulk capacitor on the main supply. The STM8A core is 5V tolerant, but ensure the ADC reference voltage is stable for accurate conversions. Also, configure the option bytes correctly for the desired clock source and watchdog settings before production.

Запрос цены Контакты
STM8AF6166 - 8-bit Automotive MCU, 32KB Flash | STMicroelectronics
STM8AF6166

STM8AF6166 - 8-bit Automotive MCU, 32KB Flash | STMicroelectronics

The STMicroelectronics STM8AF6166 is an 8-bit automotive-grade microcontroller based on the STM8A core, operating at up to 16 MHz with 32 KB of Flash memory and 2 KB of RAM. It is housed in a 48-pin LQFP package and is designed for body electronics, motor control, and other automotive applications requiring robust performance and reliability. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a CPU, memory, and peripherals. The STM8A family is optimized for automotive environments, offering a wide operating temperature range (-40°C to +150°C) and compliance with AEC-Q100 standards. As a member of the STM8A series, it provides a cost-effective solution for real-time control tasks in vehicles. Key features include a 16 MHz CPU clock, 32 KB of program Flash, 2 KB of RAM, and 1 KB of EEPROM with error correction code (ECC). It integrates a 10-bit analog-to-digital converter (ADC) with up to 10 channels, two 16-bit timers, one 8-bit timer, and a UART, SPI, and I2C interface. The device operates from a 3.0V to 5.5V supply, making it suitable for direct battery connection in automotive systems. The STM8AF6166 uses a Harvard architecture with a pipeline, achieving up to 16 MIPS at 16 MHz. It includes an embedded boot ROM for in-application programming (IAP) and supports single-wire debug (SWIM) for programming and debugging. The MCU features a low-power mode with a typical current consumption of 10 µA in halt mode, extending battery life in always-on applications. Typical applications include automotive body control modules (BCM), window lift control, seat control, and motor control for pumps and fans. Its robust EMC performance and wide temperature range make it ideal for under-hood and in-cabin electronics. The integrated EEPROM allows for storing calibration data and fault codes without external memory. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100 nF capacitors placed close to the device. The SWIM pin should be pulled up with a 10 kΩ resistor for reliable programming. For automotive applications, consider using the internal watchdog timer to enhance system reliability.

Запрос цены Контакты
STM8AF6226TCY - 8-bit Automotive MCU, 8KB Flash, 16MHz | STMicroelectronics
STM8AF6226TCY

STM8AF6226TCY - 8-bit Automotive MCU, 8KB Flash, 16MHz | STMicroelectronics

The STM8AF6226TCY is an 8-bit automotive-grade microcontroller from STMicroelectronics, featuring an STM8A core running at up to 16 MHz. It integrates 8 KB of Flash memory, 1 KB of RAM, and 128 bytes of EEPROM, making it suitable for cost-sensitive automotive body and lighting applications. The device is offered in a 32-pin LQFP package (7x7 mm) and operates over a wide temperature range of -40°C to +150°C, meeting AEC-Q100 Grade 0 requirements. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a subset of the broader microcontroller family, which includes 16-bit and 32-bit devices. In the hierarchy of embedded systems, an 8-bit MCU sits below 16-bit and 32-bit parts, offering lower cost and power consumption while still providing sufficient performance for control-oriented tasks such as reading sensors, driving actuators, and managing communication protocols. The STM8A core is an enhanced 8-bit architecture with a three-stage pipeline, enabling most instructions to execute in a single clock cycle. Key features of the STM8AF6226TCY include a 16 MHz maximum CPU frequency, 8 KB of Flash with read-while-write capability, 1 KB of SRAM, and 128 bytes of true EEPROM. It also integrates a 10-bit analog-to-digital converter (ADC) with up to 7 channels, two 16-bit timers, one 8-bit timer, and a UART, SPI, and I2C interface. The device supports a supply voltage range of 3.0V to 5.5V, making it compatible with standard automotive battery systems. Its low-power modes, including Active-Halt and Halt, help reduce current consumption to as low as 1.5 µA in Halt mode. From a technical architecture perspective, the STM8AF6226TCY is built on a high-density Flash process, providing robust data retention and endurance. The embedded EEPROM supports up to 300,000 write/erase cycles, which is critical for storing calibration data and fault codes in automotive applications. The device also includes a clock security system (CSS) that detects clock failures and automatically switches to an internal oscillator, enhancing system reliability. The ADC offers a conversion time of 3 µs at 4 MHz, enabling real-time monitoring of analog signals such as battery voltage and temperature. Typical applications include automotive body control modules, lighting control (LED and halogen), seat control, window lift, and sensor interfaces. The wide temperature range and AEC-Q100 qualification make it ideal for under-hood and in-cabin environments where reliability is paramount. The device's rich peripheral set allows designers to consolidate multiple discrete components into a single MCU, reducing BOM cost and board space. When designing with the STM8AF6226TCY, ensure proper decoupling of the VDD and VDDA pins with 100 nF ceramic capacitors placed close to the device. The NRST pin should be connected to a 100 nF capacitor to ground for reliable reset operation. For automotive applications, consider using the internal watchdog timer (IWDG) to prevent software lockups, and implement a brown-out reset (BOR) to handle voltage dips during cranking.

Запрос цены Контакты
STM8AF6246TCY - Automotive 8-bit MCU, 32KB Flash | STMicroelectronics
STM8AF6246TCY

STM8AF6246TCY - Automotive 8-bit MCU, 32KB Flash | STMicroelectronics

The STM8AF6246TCY is an automotive-grade 8-bit microcontroller from STMicroelectronics, featuring a high-performance STM8A core with Harvard architecture and a 3-stage pipeline. Operating at a maximum CPU frequency of 16 MHz, it delivers up to 10 MIPS for industry-standard benchmarks, making it suitable for real-time automotive control applications. The device integrates 32 Kbytes of Flash program memory and true data EEPROM, along with a 10-bit ADC, multiple timers, and communication interfaces including LIN, SPI, and I2C. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, designed for embedded control tasks. It integrates a processor core, memory (Flash, RAM, EEPROM), and peripherals (timers, ADC, communication interfaces) on a single die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers cost-effectiveness, low power consumption, and ease of use for dedicated control functions. The STM8A core is specifically optimized for automotive applications, balancing performance with deterministic real-time behavior. Key features of the STM8AF6246TCY include AEC-Q10x qualification for automotive reliability, a wide supply voltage range of 3V to 5.5V, and an operating temperature range of -40°C to 125°C. The device provides 25 I/O ports, 2048 bytes of RAM, and 7 ADC channels in the LQFP-32 package. The integrated true data EEPROM allows for non-volatile data storage without external components, simplifying system design and reducing BOM cost. The STM8A core's Harvard architecture enables simultaneous instruction and data access, improving throughput compared to Von Neumann designs. The 3-stage pipeline further enhances execution efficiency, achieving an average of 1.6 cycles per instruction. This architectural efficiency, combined with the 16 MHz clock, delivers 10 MIPS performance, sufficient for closed-loop control algorithms, sensor processing, and communication protocol handling in automotive systems. Typical applications include body control modules, automotive lighting control, window lift and mirror control, and sensor interfaces. The LIN interface makes it ideal for low-cost automotive sub-networks, while the 10-bit ADC enables direct connection to analog sensors such as temperature and position sensors. The wide operating temperature range and AEC-Q10x qualification ensure reliable operation in harsh automotive environments. When designing with this MCU, consider the power supply decoupling: place a 100nF ceramic capacitor close to each VDD pin and a 4.7uF bulk capacitor near the power input. The STM8A core requires a stable clock source; use the internal RC oscillator for cost-sensitive designs or an external crystal for precision timing applications. Proper layout of the ADC input pins is critical to minimize noise and maintain conversion accuracy.

Запрос цены Контакты
STM8AF6266TCY - 8-bit Automotive MCU, 32KB Flash, LQFP-32 | STMicroelectronics
STM8AF6266TCY

STM8AF6266TCY - 8-bit Automotive MCU, 32KB Flash, LQFP-32 | STMicroelectronics

The STMicroelectronics STM8AF6266TCY is an 8-bit automotive-grade microcontroller based on the STM8A core, operating at up to 16 MHz. It features 32 KB of Flash program memory, 2 KB of RAM, and 1 KB of EEPROM, all in a 32-pin LQFP package. This device is designed for body electronics, motor control, and sensor applications in automotive environments, with an extended temperature range of -40°C to +150°C and AEC-Q100 qualification. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and peripherals integrated onto one integrated circuit. It is a type of embedded controller that executes instructions sequentially, processing data in 8-bit chunks. In the system hierarchy, an 8-bit MCU is a subset of microcontrollers, which are a type of embedded processor, which in turn falls under the broader category of integrated circuits (ICs) used in electronic systems. The STM8A core is an enhanced 8-bit architecture with a three-stage pipeline, delivering up to 16 MIPS at 16 MHz, making it suitable for real-time control tasks. Key features include a 16 MHz maximum CPU frequency, 32 KB Flash with read-while-write capability, 2 KB SRAM, and 1 KB true data EEPROM with up to 300k write/erase cycles. The device integrates a 10-bit ADC with up to 10 channels, two 16-bit timers, one 8-bit timer, a UART, SPI, and I2C interfaces. It also includes a CAN 2.0B controller, making it ideal for automotive networking. The LQFP-32 package offers a compact footprint with 25 general-purpose I/O pins, and the device operates from a 2.95V to 5.5V supply voltage. Technically, the STM8AF6266TCY uses a Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and data access. The embedded EEPROM supports byte-level programming and erasing, which is critical for storing calibration data and fault codes in automotive applications. The device also features a robust clock system with an internal 16 MHz RC oscillator, an external crystal oscillator, and a phase-locked loop (PLL) for clock multiplication. The CAN controller supports both 2.0A and 2.0B protocols, with message filtering and a 3-message mailbox. Typical applications include automotive body control modules (BCM), window lift and mirror control, HVAC control, and sensor interfaces. The CAN interface enables communication with the vehicle's main network, while the high-temperature rating and AEC-Q100 qualification ensure reliability in harsh under-hood environments. The low-power modes (Wait, Active-Halt, Halt) help reduce current consumption in battery-powered or always-on systems. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100 nF capacitors placed close to the device. The VCAP pin requires a 470 nF capacitor for internal regulator stability. For CAN communication, a CAN transceiver such as the TJA1050 is needed to interface with the physical bus. The device supports in-application programming (IAP) via the UART or CAN, enabling firmware updates in the field.

Запрос цены Контакты
STM8AF6286TCY - 8-bit Automotive MCU, 64KB Flash, 24MHz | STMicroelectronics
STM8AF6286TCY

STM8AF6286TCY - 8-bit Automotive MCU, 64KB Flash, 24MHz | STMicroelectronics

The STM8AF6286TCY is an 8-bit automotive-grade microcontroller from STMicroelectronics, featuring a high-performance STM8 core running at up to 24 MHz. It integrates 64 KB of Flash memory, 6 KB of RAM, and 2 KB of EEPROM, making it suitable for a wide range of automotive body and safety applications. The device is offered in a 32-pin LQFP package, providing a compact footprint for space-constrained designs. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, typically used for embedded control applications. It integrates a processor core, memory, and peripherals on one chip, enabling cost-effective and efficient control of electronic systems. In the automotive domain, 8-bit MCUs are widely used for body control modules, lighting control, and sensor interfacing, where moderate processing power and low power consumption are essential. Key features of the STM8AF6286TCY include a 24 MHz CPU clock, 64 KB of Flash memory with read-while-write capability, 6 KB of RAM, and 2 KB of true data EEPROM with up to 300k write/erase cycles. It also offers a rich set of peripherals: two UARTs, one SPI, one I2C, a 10-bit ADC with up to 10 channels, and multiple 16-bit timers. The device operates over a supply voltage range of 3.0V to 5.5V and is specified for the automotive temperature range of -40°C to +150°C, meeting AEC-Q100 Grade 0 requirements. The STM8 core is based on a Harvard architecture with a 3-stage pipeline, achieving up to 20 MIPS at 24 MHz. It includes an extended instruction set with hardware multiply and divide, and supports a wide range of addressing modes. The Flash memory is organized with error correction code (ECC) for enhanced reliability, and the EEPROM is designed for high endurance, making it ideal for storing calibration data and fault codes in automotive systems. Typical applications include automotive body control modules (BCM), lighting control (LED and HID), seat control, window lift, and sensor interfaces. The device's robust ESD protection and wide operating temperature range make it well-suited for harsh automotive environments. Additionally, its low power modes (Active-Halt, Halt) help reduce battery drain in always-on systems. When designing with the STM8AF6286TCY, ensure proper decoupling of the VDD and VDDA pins with 100nF capacitors placed close to the pins. The device supports in-application programming (IAP) via the bootloader, allowing firmware updates in the field. For EMI-sensitive applications, use the internal clock divider and enable the clock security system to monitor the external crystal.

Запрос цены Контакты
STM8AF6366 - Automotive 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics
STM8AF6366

STM8AF6366 - Automotive 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics

The STM8AF6366 is an automotive-grade 8-bit microcontroller from STMicroelectronics, featuring an advanced STM8A core with Harvard architecture and a 3-stage pipeline. It operates at a maximum CPU frequency of 16 MHz, delivering up to 10 MIPS for industry-standard benchmarks. The device offers from 16 to 32 Kbyte of Flash program memory and integrated true data EEPROM, making it suitable for a wide range of automotive body electronics, lighting, and motor control applications. It is available in a 32-pin LQFP (7x7 mm) package, which is compact and suitable for space-constrained PCB designs. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a type of embedded processor designed for control-oriented applications, often used in automotive, industrial, and consumer electronics. The STM8A family is part of the broader STM8 series, which is known for its cost-effectiveness, robustness, and ease of use. The STM8AF6366 sits in the medium-density segment of the STM8A product line, providing a balance of memory, performance, and peripheral integration for automotive systems. Key features of the STM8AF6366 include a 10-bit analog-to-digital converter (ADC) with up to 16 multiplexed channels, multiple communication interfaces (UART, SPI, I2C), and a variety of timers including a 16-bit advanced control timer for PWM generation. The device is AEC-Q10x qualified, ensuring reliability for automotive environments. It also features low-power modes, an integrated watchdog timer, and a clock security system for enhanced system robustness. From a technical perspective, the STM8A core is based on a Harvard architecture with separate instruction and data buses, enabling efficient execution. The 3-stage pipeline allows for an average of 1.6 cycles per instruction, resulting in high performance at a modest clock frequency. The integrated true data EEPROM provides non-volatile storage for calibration data or parameters, which is critical in automotive applications where data retention is essential. The device operates over a supply voltage range of 3.0V to 5.5V, making it compatible with standard automotive power rails. Typical applications include automotive body control modules, lighting control (e.g., LED and HID), motor control for fans and pumps, and sensor interfaces. The STM8AF6366 is also used in aftermarket automotive electronics and industrial control systems where its automotive qualification and robust feature set are advantageous. Its wide operating temperature range (-40°C to +150°C) ensures reliable operation in harsh environments. When designing with the STM8AF6366, it is important to consider proper decoupling of the power supply pins and careful layout of the crystal oscillator circuit to minimize noise and ensure stable clock operation. The device's low-power modes should be utilized to meet energy efficiency requirements in battery-powered or energy-conscious applications.

Запрос цены Контакты
STM8AF6388 - 8-bit Automotive MCU, 64KB Flash | STMicroelectronics
STM8AF6388

STM8AF6388 - 8-bit Automotive MCU, 64KB Flash | STMicroelectronics

The STMicroelectronics STM8AF6388 is an 8-bit automotive-grade microcontroller based on the STM8A core, offering up to 64KB of Flash memory and 6KB of RAM in a 48-pin LQFP package. It operates over a supply voltage range of 3.0V to 5.5V and is designed for harsh automotive environments with an extended temperature range of -40°C to +150°C. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a subset of the broader microcontroller family, which falls under embedded systems and integrated circuits. The STM8A core is an enhanced 8-bit architecture with a three-stage pipeline, delivering up to 16 MIPS at 24 MHz, making it suitable for real-time control applications. Key features include 64KB of Flash memory with read-while-write capability, 6KB of SRAM, and 2KB of EEPROM with true data EEPROM. It integrates a 10-bit ADC with up to 16 channels, two 16-bit timers, one 8-bit timer, and a CAN 2.0B controller for automotive networking. The device also includes an SPI, I2C, and two UARTs for communication, along with a LIN interface for local interconnect networking. The STM8AF6388 is built on a high-density Flash technology, providing robust data retention and endurance. The automotive qualification (AEC-Q100) ensures reliability under extreme temperature and vibration conditions. The CAN controller supports both standard and extended frame formats, enabling seamless integration into vehicle networks. Typical applications include body control modules, automotive lighting control, sensor interfaces, and power window control. The device's low power consumption and wide voltage range make it ideal for battery-powered automotive systems. Its robust communication interfaces allow it to serve as a central node in distributed automotive networks. When designing with this MCU, ensure proper decoupling of the power supply pins and use the internal RC oscillator for cost-sensitive designs, or an external crystal for higher accuracy. The CAN bus requires proper termination resistors and common-mode chokes for EMC compliance.

Запрос цены Контакты
STM8AL3146TAY - 8-bit Ultra-Low-Power MCU, 16KB Flash | STMicroelectronics
STM8AL3146TAY

STM8AL3146TAY - 8-bit Ultra-Low-Power MCU, 16KB Flash | STMicroelectronics

The STM8AL3146TAY is an 8-bit ultra-low-power microcontroller from STMicroelectronics, featuring an STM8A core running at up to 16 MHz. It integrates 16 KB of Flash memory, 2 KB of RAM, and 1 KB of EEPROM, making it suitable for battery-powered and energy-harvesting applications. The device operates from a 1.8V to 3.6V supply and is available in a 32-pin LQFP (7x7) package. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a type of embedded processor used to control electronic systems, forming the core of many smart devices. In the hierarchy of computing devices, an 8-bit MCU is a subset of microcontrollers, which are a subset of embedded systems, which are a subset of electronic systems. The STM8AL3146TAY belongs to the STM8A family, which is designed for automotive and industrial applications requiring low power consumption and high reliability. Key features include multiple low-power modes (Wait, Active-Halt, Halt) with current consumption as low as 0.6 µA in Halt mode, a 12-bit ADC with up to 16 channels, two comparators, and a real-time clock (RTC). It also integrates a variety of communication interfaces: SPI, I2C, and UART, enabling flexible connectivity. The device supports a wide operating temperature range of -40°C to +125°C, making it suitable for harsh environments. The STM8AL3146TAY is built on a low-power 8-bit core with a Harvard architecture, featuring an extended instruction set and a single-wire debug interface (SWIM). It includes a 16-bit timer, a 16-bit low-power timer, and a watchdog timer for robust operation. The EEPROM allows data storage without external components, and the Flash memory supports in-application programming (IAP) for firmware updates. Typical applications include automotive body electronics (e.g., window lift, lighting control), industrial sensors, smart meters, and portable medical devices. Its ultra-low-power consumption extends battery life in remote monitoring systems, while the wide temperature range ensures reliable operation in automotive under-hood environments. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main supply. Use the low-power modes effectively to minimize average current consumption, and ensure the SWIM debug interface is accessible for programming and debugging.

Запрос цены Контакты