EP1810JC-45 - Classic EPLD, 48 Macrocells, 45ns, UV PLCC | Altera
Артикул: EP1810JC-45 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $32.75 | $327,50 |
| 100 | $27.2 | $2.720,00 |
| 500 | $23.4 | $11.700,00 |
| 1.000 | $21.1 | $21.100,00 |
EP1810JC-45 Обзор
A Classic EPLD (Erasable Programmable Logic Device) is a one-time- or UV-erasable non-volatile logic device that predates modern SRAM-based FPGAs and flash-based CPLDs. In the system hierarchy it sits between discrete 74-series glue logic and modern FPGA/CPLD architectures: each macrocell contains a programmable AND/OR array plus a flip-flop, and the global/local buses fan logic between the AND array and the macrocell register bank. Because the device is non-volatile and instantly reconfigurable without external boot memory, Classic EPLDs were widely used for address decoding, bus arbitration, state-machine control, and glue logic in 1980s and 1990s designs.
Key features of the EP1810JC-45 include 48 macrocells, 12 dedicated inputs plus 48 bidirectional I/O lines for 60 total usable I/Os, a 33.3 MHz maximum clock frequency, and a 5.25 V maximum supply voltage with CMOS technology. The part is offered in a commercial temperature grade (typically 0C to 70C) and supports both synchronous and asynchronous logic designs via per-macrocell flip-flops with individual clear, preset, and output-enable control. Programming is performed via a standard Altera programming algorithm through the dedicated programming pins.
Typical applications for the EP1810JC-45 include microprocessor address decoding, DMA control logic, peripheral-chip glue logic in 8-bit and 16-bit systems, bus-interface adapters, and replacement of multiple 74LS/74ALS TTL packages. The 2100-gate capacity also makes it usable for small state machines, interrupt controllers, and timing/sequencer functions in legacy industrial controllers and test equipment.
When designing with this device, ensure that the supply voltage does not exceed 5.25 V and that high-speed signals use the dedicated fast-input pins rather than I/O pins. The windowed ceramic package allows repeated UV erasure, which is essential for prototype iteration - plan for a 30-60 minute UV erase cycle when iterating logic designs. The part is now in NRND/last-time-buy status at Altera/Intel, so long-term designs should consider modern MAX series replacements.
This page synthesizes distributor pricing, package-level compatibility notes, and drop-in alternatives that are not consolidated in any single manufacturer document.
Аналоги без доработки для EP1810JC-45 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EP1810JC-45 (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Operating Temperature, Technology, Package, Package Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EP1810JC-35
✅ Прямая замена✓ В наличии
$5.48 / шт.
Открыть даташит →EP1810JC-25
✅ Прямая замена✓ В наличии
$6.8 / шт.
Открыть даташит →EP1810GI-45
✅ Прямая замена✓ В наличии
$56.4 / шт.
Открыть даташит →EP1810GM883B
✅ Прямая замена✓ В наличии
$125.4 / шт.
Открыть даташит →EP1810GC-35AB
✅ Прямая замена✓ В наличии
$9.95 / шт.
Открыть даташит →EP1810GC-35
✅ Прямая замена✓ В наличии
$177.12 / шт.
Открыть даташит →EP1810JC-45 Максимальные параметры и электрические характеристики
| Product Type | Classic EPLD (Erasable Programmable Logic Device) |
| Family | EP1810 (Classic EPLD Family) |
| Macrocells | 48 |
| Equivalent Gates | 2100 gates |
| Dedicated Inputs | 12 |
| I/O Pins | 48 |
| Total User I/O | 60 |
| Propagation Delay (tpd) | 45 ns |
| Максимальная тактовая частота | 33.3 MHz |
| Technology | CMOS, UV-erasable |
| Maximum Supply Voltage | 5.25 V |
| Корпус | PLCC-68 (QCCJ, J-Lead, windowed ceramic) |
| Число выводов | 68 |
| Package Code | QCCJ |
| Temperature Grade | Commercial |
| Тип монтажа | Surface Mount |
Конфигурация выводов EP1810JC-45
| Контакт 1 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 2 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 3 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 4 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 5 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 6 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 7 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 8 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 9 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 10 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 11 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 12 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 13 | GND — Ground |
| Контакт 14 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 15 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 16 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 17 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 18 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 19 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 20 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 21 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 22 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 23 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 24 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 25 | GND — Ground |
| Контакт 26 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 27 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 28 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 29 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 30 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 31 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 32 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 33 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 34 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 35 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 36 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 37 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 38 | GND — Ground |
| Контакт 39 | IN — Dedicated input pin |
| Контакт 40 | IN — Dedicated input pin |
| Контакт 41 | IN — Dedicated input pin |
| Контакт 42 | IN — Dedicated input pin |
| Контакт 43 | IN — Dedicated input pin |
| Контакт 44 | IN — Dedicated input pin |
| Контакт 45 | IN — Dedicated input pin |
| Контакт 46 | IN — Dedicated input pin |
| Контакт 47 | IN — Dedicated input pin |
| Контакт 48 | IN — Dedicated input pin |
| Контакт 49 | IN — Dedicated input pin |
| Контакт 50 | GND — Ground |
| Контакт 51 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 52 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 53 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 54 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 55 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 56 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 57 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 58 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 59 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 60 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 61 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 62 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 63 | GND — Ground |
| Контакт 64 | VCC — Power supply (5 V typical) |
| Контакт 65 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 66 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 67 | I/O — Bidirectional I/O pin (macrocell I/O) |
| Контакт 68 | I/O — Bidirectional I/O pin (macrocell I/O) |
Типичное применение
EP1810JC-45 подходит для 6 применениеs: Microprocessor Address Decoding, Bus Arbitration and DMA Control Logic, Peripheral Chip Glue Logic Replacement, Industrial Control State Machines, Legacy Test and Measurement Equipment, Telecommunications Interface Adapters.
Microprocessor Address Decoding
The EP1810JC-45's 48 macrocells and 12 dedicated fast inputs make it well-suited for microprocessor address decoding in 8-bit and 16-bit systems. With 2100 equivalent gates of capacity, the device can implement full 16-bit or 24-bit address decoders with chip-select outputs for ROM, RAM, and peripheral memory maps. The 45 ns tpd is fast enough for decode insertion in systems with clock frequencies up to ~15 MHz (with derating), and the UV-erasable ceramic package allows prototype iteration when refining memory maps during development.
Рекомендуется
Bus Arbitration and DMA Control Logic
Bus arbitration and DMA control logic benefit from the EP1810JC-45's 48 bidirectional I/O pins and dedicated flip-flops in each macrocell. The device can implement multi-master bus arbiters, HOLD/HLTA sequences, and DMA controller state machines that replace 4-6 discrete 74LS/ALS TTL packages per function. The 5 V CMOS technology matches TTL logic levels directly, eliminating level translators. The windowed ceramic package supports prototype iteration of arbitration algorithms before committing to a non-windowed production part.
Рекомендуется
Peripheral Chip Glue Logic Replacement
The EP1810JC-45 can replace entire boards of 74LS/74ALS glue logic in peripheral and interface cards. A single EP1810 implements 4-8 standard MSI functions (decoders, multiplexers, latches, parity generators) in one package, reducing board area by 60-70% and improving noise margins through lower aggregate switching current. The 33.3 MHz maximum clock frequency supports ISA bus and similar peripheral bus timings. Designers migrating legacy 74-series logic to a single EPLD gain PCB simplification and improved reliability.
Рекомендуется
Industrial Control State Machines
Industrial controllers and machine automation systems use the EP1810JC-45 for state-machine control of conveyor sequencers, packaging machinery, and process controllers. Each macrocell provides a dedicated flip-flop with clear/preset control, ideal for Mealy and Moore state machines. The 2100-gate capacity supports 16-32 state FSMs with 4-8 output actions. The 5 V supply and CMOS technology provide good noise immunity for factory-floor environments, though industrial-grade EP1810GI-45 is preferred for -40C to +85C operation.
Рекомендуется
Legacy Test and Measurement Equipment
Test and measurement instruments with EP1810JC-45 logic include timing generators, frequency counters, and protocol analyzers built in the 1990s. The device's deterministic 45 ns tpd makes it useful for precise timing circuits where CPLD/FPGA jitter would be unacceptable. Maintenance and repair of legacy T&M equipment is the primary current use case - the UV-erasable windowed ceramic package supports in-house reprogramming when logic updates are needed during service.
Рекомендуется
Telecommunications Interface Adapters
The EP1810JC-45 was widely used in telecommunications equipment for serial-interface adapters, T1/E1 framer glue logic, and X.25 protocol controllers. The 5 V CMOS technology directly interfaces with TTL-level telecom bus standards, and the 48 I/Os handle multiple serial channels plus control/status signaling. For legacy telecom systems still in service, the EP1810JC-45 provides proven reliability and field-validated operation, though new designs should migrate to modern MAX V or Lattice ispMACH CPLDs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EP1810JC-45 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EP1810JC-35 | EP1810JC-25 | EP1810GI-45 | EP1810GM883B | EP1810GC-35AB | EP1810GC-35 |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PLCC-68 (QCCJ) | PLCC-68 (QCCJ) - same | PLCC-68 (QCCJ) - same | PLCC-68 (QCCJ) - same | PLCC-68 (QCCJ) - same | PLCC-68 (QCCJ) - same | PLCC-68 (QCCJ) - same |
| Propagation Delay (tpd) | 45 ns | 35 ns (-22%) | 25 ns (-44%) | 45 ns (same) | 45 ns (same) | 35 ns (-22%) | 35 ns (-22%) |
| Macrocells | 48 | 48 (same) | 48 (same) | 48 (same) | 48 (same) | 48 (same) | 48 (same) |
| Max Clock Frequency | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz |
| Temperature Grade | Commercial | Commercial | Commercial | Industrial (-40C to +85C) | Military (MIL-STD-883B) | Commercial | Commercial |
| Package Type | Windowed ceramic (UV-erasable) | Windowed ceramic (UV-erasable) | Windowed ceramic (UV-erasable) | Windowed ceramic (UV-erasable) | Windowed ceramic (UV-erasable) | Plastic non-windowed (one-time-programmable) | Plastic non-windowed (one-time-programmable) |
| Supply Voltage Max | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V |
Ключевые отличия
- Speed grade position in EP1810 family (против EP1810JC-35)
- Windowed ceramic vs plastic package (против EP1810GC-35)
- Commercial vs industrial temperature grade (против EP1810GI-45)
Заметки по проектированию
The EP1810JC-45 operates from a single 5 V supply (4.5 V to 5.25 V range) with CMOS technology. Decouple VCC with a 0.1 uF ceramic capacitor placed within 5 mm of the VCC pin, plus a 10 uF tantalum bulk capacitor at the board power-entry point. Estimated: at 33.3 MHz with all 48 I/Os switching, dynamic current is approximately 30-50 mA. The four GND pins (13, 25, 38, 50) must all be connected for proper operation.
Do not confuse EP1810JC-45 (ceramic windowed, UV-erasable, prototyping) with EP1810GC-45 (plastic, one-time-programmable, production). Both share the PLCC-68 footprint but only the JC variant supports UV erasure for logic iteration. Also note: Classic EPLDs require a specific programming algorithm via dedicated programming pins - they cannot be programmed in-circuit like modern flash CPLDs.
The windowed ceramic QCCJ package has limited thermal dissipation - at 33.3 MHz with full I/O switching, the device dissipates approximately 250-400 mW. Commercial temperature grade (0C to 70C) is standard. For higher temperature or vibration environments, consider the EP1810GI-45 (industrial, -40C to +85C) or EP1810GM883B (MIL-STD-883 screened).
Place the EP1810JC-45 with pin 1 orientation matching the PLCC-68 socket orientation. Use a machined-pin PLCC socket (not the cheaper stamped sockets) for reliable prototyping cycles - the J-lead ceramic package contacts wear with repeated insertion. For UV erasure, ensure at least 25 mm of clearance above the quartz window for the UV eraser lamp.
Информация о соответствии
EP1810 family datasheet (1989) predates RoHS compliance documentation. RoHS/REACH status not stated in verified data - assume non-compliant for the original ceramic JC variant. The plastic GC variants may have later RoHS-compliant revisions; verify with the actual manufacturer before use in RoHS-required designs. AEC-Q100 not applicable - this is a commercial/industrial/military logic device.
