MAX3243ECAI+ - 3V/5V 250kbps RS-232 Transceiver
Артикул: MAX3243ECAI+ ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.43 | $3,43 |
| 10 | $3.43 | $34,30 |
| 100 | $3.43 | $343,00 |
| 500 | $3.43 | $1.715,00 |
| 1.000 | $3.43 | $3.430,00 |
MAX3243ECAI+ Обзор
An RS-232 transceiver is an interface IC that converts between digital logic-level signals and RS-232 voltage levels. The MAX3243 family belongs to the interface-IC hierarchy and is used where a UART or other digital controller must communicate with a PC, terminal, modem, or other RS-232 equipment. Its multiple drivers and receivers support both standard serial links and additional status or control signals.
Key features include automatic shutdown when no valid receiver signal is detected, automatic wakeup when a valid signal returns, and enhanced ESD protection. The manufacturer describes protection to ±15kV using the air-gap discharge test and ±8kV using the contact-discharge test. The available data also identifies the device as a 3/5 transceiver with a 250kbps data-rate capability.
The MAX3243E architecture is intended for low-power serial-interface systems. Automatic shutdown can reduce supply consumption when the RS-232 connection is idle, while wakeup allows the interface to reactivate without a continuously active supply state. The device is designed for 3V-powered equipment where RS-232 voltage generation and signal conditioning are required despite low logic supply voltage.
Typical applications include PC serial-port interfaces, industrial control equipment, data acquisition systems, point-of-sale terminals, and embedded serial adapters. The combination of multiple drivers, five receivers, automatic power management, and ESD protection supports both data transfer and hardware status signaling in compact embedded systems.
Designers should verify the exact pin assignments, external charge-pump capacitors, logic levels, and RS-232 line requirements against the manufacturer datasheet. PCB layout should keep the interface traces short, provide suitable return paths, and account for the elevated RS-232 voltage levels at the driver outputs.
Аналоги без доработки для MAX3243ECAI+ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MAX3243ECAI+ (тот же форм-фактор и посадочное место) — отличается по Data Rate, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MAX3243CAI
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ICL3243CAZ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ICL3243CAZ-T
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX3243CAI+
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX3243EAI
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX3243ECAI+ Характеристики
| Product Type | 3/5 RS-232 transceiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Скорость передачи данных | 250kbps |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Interface Standard | EIA/TIA-232 and V.28/V.24 |
| Automatic Shutdown | Yes |
| Automatic Wakeup | Yes |
| Air-Gap ESD Protection | ±15kV |
| Contact-Discharge ESD Protection | ±8kV |
| Корпус | 28-pin SSOP |
| Тип монтажа | Surface mount |
| Ток потребления | 1µA shutdown feature described by manufacturer |
| Special Outputs | ROUT2B and INVALID always enabled |
| Compliance Status | RoHS and REACH status not stated in verified data |
Руководство по цоколевке MAX3243ECAI+ в корпусе 28-pin ssop
Цоколевка для MAX3243ECAI+ (корпус 28-pin ssop). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для MAX3243ECAI+.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MAX3243ECAI+ подходит для 8 применениеs: DE-9 PC Serial Port, Embedded UART Serial Adapter, Industrial Data Acquisition, Point-of-Sale Terminal, Serial Port Test Equipment, Modem and Communication Equipment, Low-Power Serial Peripherals, RS-232 Port Expansion.
DE-9 PC Serial Port
MAX3243ECAI+ fits a DE-9 DTE interface because it provides three line drivers and five receivers, matching the multi-signal nature of a conventional PC serial connector. The 3.0V-to-5.5V supply range allows it to sit beside embedded UART logic without requiring a 5V-only interface. The verified Maxim Integrated description specifically identifies the device as ideal for DE-9 DTE applications. External charge-pump capacitors, connector protection, and signal routing must follow the datasheet reference layout.
Рекомендуется
Embedded UART Serial Adapter
MAX3243ECAI+ is suitable for an embedded controller that exposes a legacy RS-232 port through a UART. Its three drivers and five receivers provide more channels than a basic one-direction link, while automatic shutdown and wakeup can reduce power use when the cable is idle. The 250kbps capability supports higher-rate serial links than conventional low-speed RS-232 ports, although the complete UART, cable, and timing design must support that rate.
Рекомендуется
Industrial Data Acquisition
MAX3243ECAI+ can provide the RS-232 interface between a data-acquisition controller and a host computer or service terminal. Its 3V operation supports compact embedded systems, and the multiple drivers and receivers allow both command/data channels and status signaling to be managed in one package. The available verified data does not specify industrial temperature grades or isolation, so a product revision should be checked before using it in a harsh or safety-related environment.
Рекомендуется
Point-of-Sale Terminal
A point-of-sale terminal can use MAX3243ECAI+ to connect a low-voltage controller to an RS-232 receipt printer, scanner, or service interface. The 3.0V-to-5.5V supply range is useful in compact systems, while automatic shutdown helps avoid unnecessary supply activity when the serial link is idle. The ±15kV air-gap and ±8kV contact-discharge ratings add board-level transient protection, but cable shielding, grounding, and connector selection remain important parts of the overall system protection.
Рекомендуется
Serial Port Test Equipment
MAX3243ECAI+ is appropriate for test and measurement equipment that needs to present an RS-232-compatible port to a device under test. Three drivers and five receivers can support multiple handshake and status lines, while the 250kbps maximum data rate helps cover high-speed legacy serial test links. For laboratory use, verify the complete datasheet electrical characteristics, especially receiver thresholds, driver slew behavior, and supply-current conditions, because those details are not included in the supplied snippets.
Рекомендуется
Modem and Communication Equipment
MAX3243ECAI+ supports communication equipment requiring a multi-line RS-232 interface. The three drivers and five receivers provide flexibility for transmit, receive, modem-control, and status signals, while the EIA/TIA-232 and V.28/V.24 references align it with established serial-interface practice. Its low-voltage supply operation makes it useful in compact communication products. The designer must still verify line termination, connector signaling, and whether the 250kbps rate is acceptable for the target modem or cable.
Рекомендуется
Low-Power Serial Peripherals
MAX3243ECAI+ is useful in battery-operated or power-conscious serial peripherals because its verified product description includes approximately 1µA shutdown supply current and automatic wakeup. When no valid receiver signal is present, the interface can shut down its supply and drivers; when activity resumes, wakeup supports reactivation. Actual battery-life benefits depend on the system duty cycle, external capacitors, pull networks, and UART behavior, so the shutdown current should be verified under the intended test conditions.
Рекомендуется
RS-232 Port Expansion
MAX3243ECAI+ can expand a controller with one UART into a more capable RS-232 port by providing three transmit channels and five receive channels in one package. This allows data, flow-control, ring-indicator, and validity signals to share the same interface IC, reducing the number of separate level-shifting channels. The device's ROUT2B and INVALID outputs are always enabled according to the verified data, which is useful for monitoring link status. Final pin mapping and direction must be taken from the current manufacturer datasheet.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MAX3243ECAI+ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MAX3243CAI | ICL3243CAZ | ICL3243CAZ-T | MAX3243CAI+ | MAX3243EAI |
|---|---|---|---|---|---|---|
| Package | SSOP-28 | SSOP-28 | SSOP | SSOP | SSOP-28 | SSOP-28 |
| Brand | Maxim Integrated | Maxim Integrated | Intersil | Intersil | Maxim Integrated | Maxim Integrated |
| Automatic Shutdown and Wakeup | Yes | Not stated in verified comparison | Not stated in verified comparison | Not stated in verified comparison | Not stated in verified comparison | Not stated in verified comparison |
Ключевые отличия
- High integration for multi-line RS-232 ports (против MAX3243CAI)
- Automatic power management (против MAX3243CAI)
- ESD protection for external serial lines (против MAX3243CAI)
Заметки по проектированию
Place the MAX3243ECAI+ charge-pump capacitors and the RS-232 connector-side protection components close to the IC and connector exactly as shown in the manufacturer layout guidance. Keep the high-voltage RS-232 traces away from UART, clock, and sensitive analog nets. The supplied data confirms the 28-pin SSOP package and 3.0V-to-5.5V operating range, but the exact capacitor values and pin names must be taken from the current datasheet.
Design the supply rail for the 3.0V-to-5.5V operating range and account for the charge-pump and driver current demanded by the RS-232 outputs. Do not assume that the approximately 1µA shutdown figure applies to active transmission; the manufacturer data describes it in conjunction with automatic shutdown. Check the current under the intended load and ensure the source can handle startup and cable-driver transients.
Do not treat an SSOP-28 package match as sufficient proof of interchangeability. Confirm the numbered pins, supply range, receiver thresholds, driver outputs, AutoShutdown behavior, INVALID output, and ROUT2B output for any replacement. The verified cross-reference material supports MAX3243CAI and ICL3243CAZ as candidates, but it does not provide complete electrical tables for every suffix.
RS-232 drivers intentionally produce large voltage swings, so keep the interface path compact and provide a solid ground reference. Use cable shielding and connector grounding appropriate to the installation rather than relying only on the IC's ±15kV air-gap and ±8kV contact-discharge ratings. Validate conducted and radiated emissions with the final enclosure, cable, and load configuration.
Информация о соответствии
The verified data does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for MAX3243ECAI+.