PIC24EP512GP204-E/PT - 16-bit 70 MIPS MCU, 512KB Flash | Microchip
Артикул: PIC24EP512GP204-E/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.92 | $8,92 |
| 10 | $7.99 | $79,90 |
| 100 | $7.04 | $704,00 |
| 500 | $6.31 | $3.155,00 |
| 1.000 | $5.62 | $5.620,00 |
PIC24EP512GP204-E/PT Обзор
A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, internal Flash program memory, RAM, and a rich set of peripherals including timers, communication interfaces, and analog blocks. PIC24E MCUs sit in the hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> microcontroller -> embedded processor -> semiconductor. The PIC24E family uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, balancing deterministic interrupt response, code density, and DSP-class arithmetic on a single deterministic core.
Key features include up to 70 MIPS performance, integrated operational amplifiers, analog comparators, a Charge Time Measurement Unit (CTMU), Peripheral Trigger Generator (PTG), and advanced PWM peripherals. The PIC24EP512GP204 also incorporates a 10/12-bit ADC with superior analog performance, multiple UART/SPI/I2C interfaces, and configurable I/O. The integrated op amps and CTMU eliminate external analog components for sensor conditioning, while PTG enables complex timing/sequencing without continuous CPU intervention.
The PIC24EP512GP204 uses Microchip's enhanced PIC24E core with hardware multiply/divide and DSP engine support, providing deterministic interrupt latency and C-friendly architecture. Its 512 KB Flash supports large application code, while the 48 KB SRAM accommodates data buffers for communication stacks (TCP/IP, USB) and signal processing. High-speed PWM up to 1 ns resolution and CTMU enable precise timing-critical tasks such as capacitive touch sensing and motor control loop execution.
Typical applications include industrial control systems, motor control (BLDC/PMSM), high-end sensor signal conditioning, LED lighting control, power-conversion digital control, and USB device/host interfaces. The combination of op amps, comparators, and CTMU is particularly well-suited for sensor fusion, automotive body modules, and intelligent battery management.
When designing with this device, ensure that the core voltage supply is properly decoupled and that unused op amp/comparator inputs are tied to known voltage levels to minimize leakage. For EMI-sensitive applications, place the IC's analog and digital ground returns separately back to a star-ground point.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для PIC24EP512GP204-E/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24EP512GP204-E/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Operating Temperature, Core Architecture, CTMU.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24EP512GP204-I/PT
✅ Прямая замена✓ В наличии
$6.85 / шт.
Открыть даташит →PIC24EP512GP204-E/ML
✅ Прямая замена✓ В наличии
$7.49 / шт.
Открыть даташит →PIC24EP256GP204-E/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24EP256GP204-I/PT
✅ Прямая замена✓ В наличии
$5.62 / шт.
Открыть даташит →PIC24EP128GP204-E/PT
✅ Прямая замена✓ В наличии
$4.25 / шт.
Открыть даташит →PIC24EP512MC204-E/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24EP256MC204-E/PT
✅ Прямая замена✓ В наличии
$3.42 / шт.
Открыть даташит →PIC24EP512GP204-E/PT Максимальные параметры и электрические характеристики
| Core | PIC24E (16-bit dsPIC/PIC24 family) |
| Maximum CPU Speed | 70 MIPS / 70 MHz |
| Program Flash Memory | 512 KB (170K x 24) |
| SRAM | 48 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| Диапазон рабочих температур | -40C to +125C (Industrial, E suffix) |
| Корпус | 44-pin TQFP (PT) |
| Тип монтажа | Surface Mount |
| I/O Pins | 35 (approx) |
| Communication Interfaces | I2C, SPI, UART, IrDA, USART |
| ADC | 10/12-bit (1 MSPS, multiple channels) |
| Integrated Op Amps | Yes (internal) |
| Comparators | Yes (internal) |
| CTMU | Yes (Charge Time Measurement Unit) |
| Peripheral Trigger Generator (PTG) | Yes |
| High-Speed PWM | Yes (PWM with up to 1 ns resolution) |
| Статус RoHS | Compliant |
| Lead-Free | Yes |
Конфигурация выводов PIC24EP512GP204-E/PT
| Контакт 1 | OSC1/CLKI/RA0 — Crystal oscillator input / external clock / GPIO RA0 |
| Контакт 2 | OSC2/CLKO/RA1 — Crystal oscillator output / GPIO RA1 |
| Контакт 3 | AN0/CVD0/RB0 — Analog input 0 / Cap touch / GPIO RB0 |
| Контакт 4 | AN1/CVD1/RB1 — Analog input 1 / Cap touch / GPIO RB1 |
| Контакт 5 | AN2/CVD2/RB2 — Analog input 2 / Cap touch / GPIO RB2 |
| Контакт 6 | AN3/CVD3/RB3 — Analog input 3 / Cap touch / GPIO RB3 |
| Контакт 7 | AN4/CVD4/RB4 — Analog input 4 / Cap touch / GPIO RB4 |
| Контакт 8 | AN5/CVD5/RB5 — Analog input 5 / Cap touch / GPIO RB5 |
| Контакт 9 | VSS — Ground reference |
| Контакт 10 | VDD — Positive supply (3.0-3.6 V) |
| Контакт 11 | AN6/CVD6/RB6 — Analog input 6 / Cap touch / GPIO RB6 |
| Контакт 12 | AN7/CVD7/RB7 — Analog input 7 / Cap touch / GPIO RB7 |
| Контакт 13 | AN8/RB8 — Analog input 8 / GPIO RB8 |
| Контакт 14 | AN9/RB9 — Analog input 9 / GPIO RB9 |
| Контакт 15 | CVREF+/AN10/RB10 — Comparator Vref+ / Analog input 10 / GPIO RB10 |
| Контакт 16 | CVREF-/AN11/RB11 — Comparator Vref- / Analog input 11 / GPIO RB11 |
| Контакт 17 | AN12/RB12 — Analog input 12 / GPIO RB12 |
| Контакт 18 | AN13/RB13 — Analog input 13 / GPIO RB13 |
| Контакт 19 | AN14/RB14 — Analog input 14 / GPIO RB14 |
| Контакт 20 | AN15/RB15 — Analog input 15 / GPIO RB15 |
| Контакт 21 | VSS — Ground reference |
| Контакт 22 | VDD — Positive supply (3.0-3.6 V) |
| Контакт 23 | OC1/RC0 — Output Compare 1 / GPIO RC0 |
| Контакт 24 | OC2/RC1 — Output Compare 2 / GPIO RC1 |
| Контакт 25 | OC3/RC2 — Output Compare 3 / GPIO RC2 |
| Контакт 26 | OC4/RC3 — Output Compare 4 / GPIO RC3 |
| Контакт 27 | OC5/RC4 — Output Compare 5 / GPIO RC4 |
| Контакт 28 | OC6/RC5 — Output Compare 6 / GPIO RC5 |
| Контакт 29 | RC6 — GPIO RC6 (UART TX alternate) |
| Контакт 30 | RC7 — GPIO RC7 (UART RX alternate) |
| Контакт 31 | RC8 — GPIO RC8 |
| Контакт 32 | RC9 — GPIO RC9 |
| Контакт 33 | VSS — Ground reference |
| Контакт 34 | VDD — Positive supply (3.0-3.6 V) |
| Контакт 35 | PGEC1/RA0 — ICSP clock / Programming (alt RA0) |
| Контакт 36 | PGED1/RA1 — ICSP data / Programming (alt RA1) |
| Контакт 37 | SDA1/RA2 — I2C1 SDA / GPIO RA2 |
| Контакт 38 | SCL1/RA3 — I2C1 SCL / GPIO RA3 |
| Контакт 39 | RA4 — GPIO RA4 |
| Контакт 40 | RA5 — GPIO RA5 |
| Контакт 41 | RA6 — GPIO RA6 |
| Контакт 42 | RA7 — GPIO RA7 |
| Контакт 43 | MCLR — Master Clear reset (active low) |
| Контакт 44 | VSS — Ground reference |
Типичное применение
PIC24EP512GP204-E/PT подходит для 7 применениеs: Industrial Motor Control (BLDC / PMSM), High-End Sensor Signal Conditioning, Capacitive Touch and HMI Interfaces, Power Conversion Digital Control, USB Device / Embedded Host, Automotive Body and Convenience Modules, LED Lighting and Driver Control.
Industrial Motor Control (BLDC / PMSM)
The PIC24EP512GP204-E/PT is well suited to sensorless and sensored BLDC/PMSM motor control through its 70 MIPS core, dedicated high-speed PWM with 1 ns edge resolution, integrated op amps for current sensing, and comparators for zero-cross detection. The 512 KB Flash accommodates field-oriented control (FOC) and sensorless observer algorithms in C, while the 48 KB SRAM holds PI controller state, Park/Clarke transforms, and ADC sample buffers. The CTMU and PTG offload timing-critical ADC triggers from the CPU, enabling deterministic commutation at 20-50 kHz PWM frequencies without jitter. Compared with discrete analog motor control, this integration reduces BOM count by 30-40% and PCB area by ~50% in compact motor-drive modules.
Рекомендуется
High-End Sensor Signal Conditioning
The PIC24EP512GP204-E/PT's integrated op amps and analog comparators enable direct interface with bridge sensors (load cells, pressure transducers) without external instrumentation amplifiers. Its CTMU provides precision time-based capacitance measurement for humidity, proximity, and flow sensors, while the 10/12-bit ADC at up to 1 MSPS samples conditioned analog signals with low latency. The 512 KB Flash supports complex linearization and calibration algorithms, and the 48 KB SRAM buffers multi-channel sensor streams. Operating from -40C to +125C, it meets industrial sensor-hub requirements and is suitable for factory-floor instrumentation, weighing scales, and HVAC transmitter designs.
Рекомендуется
Capacitive Touch and HMI Interfaces
The PIC24EP512GP204-E/PT leverages its integrated CTMU and mTouch library to implement up to 25 capacitive touch channels with hardware-based capacitance-to-digital conversion, eliminating the need for an external touch controller. Its 70 MIPS core runs debouncing, gesture recognition, and backlight control in C, while the 512 KB Flash supports multi-language UI firmware. The 35 I/O pins drive character/graphic LCDs or RGB LEDs directly. Compared with separate touch IC + MCU solutions, integrating touch sensing and HMI control into a single MCU reduces system cost by 20-30% in appliances, consumer electronics, and industrial control panels.
Рекомендуется
Power Conversion Digital Control
The PIC24EP512GP204-E/PT is widely used as the digital controller in digital-power converters (PFC, LLC, full-bridge, phase-shifted full-bridge). Its high-resolution PWM enables tight regulation of DC-DC and AC-DC converters at switching frequencies of 100-500 kHz, while the integrated op amps close current/voltage loops without external components. The 70 MIPS core executes voltage-mode and current-mode control loops with sub-microsecond latency, and the 512 KB Flash supports complex state machines and adaptive digital-control algorithms. The 48 KB SRAM holds control loop state, look-up tables, and communication protocol stacks for PMBus or proprietary interfaces in telecom and server SMPS designs.
Рекомендуется
USB Device / Embedded Host
The PIC24EP512GP204-E/PT (with the GP204 base peripherals) supports USB device and embedded host operation through its USB 2.0 full-speed peripheral, enabling it to function as a CDC, HID, or MSC device with software stacks. The 512 KB Flash hosts USB class drivers and application code, while the 48 KB SRAM handles USB endpoint buffers and protocol stacks. Combined with the 70 MIPS core, the device can run USB communication concurrently with real-time control tasks. Typical uses include USB-to-UART bridges, USB data loggers, USB HID input devices, and embedded host controllers interfacing to USB mass storage or HID peripherals in industrial and consumer designs.
Рекомендуется
Automotive Body and Convenience Modules
The PIC24EP512GP204-E/PT's industrial -40C to +125C temperature rating and integrated peripherals suit it for non-safety automotive body applications including seat control, mirror adjustment, lighting controllers, HVAC blend doors, and instrument cluster sub-functions. The 70 MIPS core runs CAN/LIN stacks (with external transceivers), PWM drives LEDs and motors, and the integrated op amps sense position feedback. The 512 KB Flash supports multi-application firmware and OTA update bootloaders. Note that this part is not AEC-Q100 qualified - for AEC-Q100 needs, designers should consider dsPIC33EP variants or other AEC-qualified families.
Рекомендуется
LED Lighting and Driver Control
The PIC24EP512GP204-E/PT's high-resolution PWM and 35 I/O pins drive multi-channel LED lighting fixtures (RGBW, tunable-white, architectural, stage lighting) with smooth dimming down to 0.1% without flicker. Its 70 MIPS core executes DMX-512, DALI, or proprietary lighting protocols alongside LED dimming math, while the integrated comparators implement over-temperature protection by sensing NTC thermistors. The 512 KB Flash supports complex lighting effects, color science (CIE 1931), and remote firmware updates via UART. Compared with dedicated LED drivers, this MCU adds significant flexibility for custom effects and IoT-connected lighting designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24EP512GP204-E/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24EP512GP204-I/PT | PIC24EP512GP204-E/ML | PIC24EP256GP204-E/PT | PIC24EP256GP204-I/PT | PIC24EP128GP204-E/PT | PIC24EP512MC204-E/PT | PIC24EP256MC204-E/PT |
|---|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-44 (PT) 10x10mm | TQFP-44 (PT) - same | QFN-44 (ML) - different body | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same |
| Program Flash Memory | 512 KB | 512 KB (same) | 512 KB (same) | 256 KB (-50%) | 256 KB (-50%) | 128 KB (-75%) | 512 KB (same) | 256 KB (-50%) |
| SRAM | 48 KB | 48 KB (same) | 48 KB (same) | 48 KB (same) | 48 KB (same) | 48 KB (same) | 48 KB (same) | 48 KB (same) |
| Maximum CPU Speed | 70 MIPS / 70 MHz | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) |
| Integrated Op Amps / CTMU | Yes (both) | Yes (both) | Yes (both) | Yes (both) | Yes (both) | Yes (both) | Yes (both) | Yes (both) |
| Peripheral Variant | GP (General Purpose) | GP (same) | GP (same) | GP (same) | GP (same) | GP (same) | MC (Motor Control) | MC (Motor Control) |
| Approx. Unit Price (USD, qty 1) | 8.92 | 7.50-8.50 | 9.00-10.00 | 7.50-8.50 | 6.50-7.50 | 6.00-7.00 | 9.00-10.00 | 7.50-8.50 |
Ключевые отличия
- Highest Flash density in the GP204 pin-compatible family (против PIC24EP256GP204-E/PT)
- Industrial -40C to +125C operating temperature (против PIC24EP512GP204-I/PT)
- Integrated op amps, comparators, and CTMU (против PIC24EP512MC204-E/PT)
Заметки по проектированию
The PIC24EP512GP204-E/PT operates from a single 3.0-3.6 V supply; decouple VDD/VSS pairs with a 100 nF ceramic capacitor placed within 5 mm of each VDD pin and a bulk 10 uF tantalum or ceramic capacitor on the main supply rail. For noise-sensitive analog designs, add a ferrite bead in series with AVDD (if exposed) and use a separate analog ground island. The E industrial grade supports operation to 125C, but power dissipation at 70 MIPS (~150 mW typical) requires thermal relief copper pours under the TQFP thermal pad connection.
Route the 70 MHz oscillator traces (OSC1/OSC2) as short, length-matched, ground-shielded traces with a guard ring tied to analog ground; keep them away from high-current switching nodes and PWM outputs. Place the crystal load capacitors within 3 mm of OSC1/OSC2 pins, and route the MCLR line with a 10 kohm pull-up to VDD and a 100 nF capacitor to ground near the pin. For USB applications using the GP variant, route D+/D- as a 90-ohm differential pair with matched length and impedance-controlled traces.
Do not exceed the absolute maximum supply voltage of 4.0 V on VDD - even brief transients above 3.6 V can damage the internal Flash memory and op amp circuits. Always configure unused I/O pins as outputs driving low (or inputs with internal weak pull-ups) to minimize supply leakage. The CTMU requires a 1 nF to 100 nF calibration capacitor on a dedicated CVD pin for accurate capacitance measurement - omitting this calibration step degrades touch-sensing accuracy by 30-50%. For motor-control applications, ensure dead-time configuration in PWM mode avoids shoot-through in half-bridges.
When routing SPI buses at speeds above 10 MHz, place a 33 ohm series damping resistor at the source end to reduce ringback. Keep SPI traces length-matched within 5 mm for clock and data, and isolate them from analog signals with a ground-shielded path. For UART communications above 115200 bps in noisy industrial environments, use the integrated IrDA encoder/decoder block with an external IrDA transceiver to improve noise immunity by 20 dB.
Информация о соответствии
RoHS and lead-free compliant per Microchip product page. Not AEC-Q100 qualified - for AEC-Q100 needs consider dsPIC33EP variants or other AEC-qualified families. Halogen-free status not explicitly stated in verified web data.