Mga Microcontroller

Mga Produkto (19,000+)

STM8L151C8U3 - 16MHz Ultra-Low-Power 8-Bit MCU | STMicroelectronics
STM8L151C8U3

STM8L151C8U3 - 16MHz Ultra-Low-Power 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8L151C8U3 is an ultra-low-power 8-bit CISC microcontroller with a 16 MHz clock, 64 KB of Flash memory, 2 KB of RAM, and 41 I/O ports in a 48-pin UFQFPN package with an exposed pad. It operates from 1.8 V to 3.6 V and combines an STM8 CPU core with low-power design features for compact, energy-conscious embedded systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, program memory, data memory, peripherals, and I/O into one package. The STM8L151 belongs to the STM8L ultra-low-power MCU family, placing it within the hierarchy of 8-bit microcontroller, embedded controller, and semiconductor. Its combination of 64 KB Flash and 16 MHz processing is intended for control-intensive products requiring more program storage than the smallest STM8 devices. The 64 KB Flash provides room for application firmware, while the 16 MHz maximum clock supports responsive control tasks. A 41-port GPIO complement allows the device to connect sensors, indicators, communications interfaces, and discrete actuators. The manufacturer describes the STM8L15xx6/8 range as ultra-low-power, and the verified distributor listing identifies this member as an 8-bit MCU optimized around the 16 MHz clock and low-energy operation. The 48-pin UFQFPN package uses a 7 mm by 7 mm body and includes an exposed pad for improved package-level heat spreading. The exposed pad is normally connected to the ground plane in accordance with the manufacturer's land-pattern and thermal guidance. The 1.8 V to 3.6 V operating range supports low-voltage embedded systems, although the final design must preserve the device's supply-voltage and input-level limits for every connected peripheral. Typical design roles include compact sensor-hub controllers, battery-operated condition-monitoring equipment, low-power industrial controls, portable accessories, and embedded modules. The STM8L151C8U3 is most appropriate when an 8-bit architecture, 64 KB Flash, a relatively high I/O count, and ultra-low-power operation are more important than using a higher-cost 32-bit MCU with a much larger memory and peripheral footprint. Designers should confirm the exact pin functions, exposed-pad connection, decoupling requirements, clock configuration, and peripheral pin multiplexing against the official STM8L151C8 documentation. Software migration or alternate sourcing should not be based only on package dimensions or Flash capacity; peripheral assignments, electrical limits, and the complete 48-pin land pattern must also match. This page consolidates verified manufacturer and distributor information with package-aware replacement guidance, application fit, and engineering cautions. It is intended to make device selection and sourcing more efficient while clearly separating documented STM8L151C8U3 facts from details that require direct datasheet verification.

RFQ Kontak
STM8L151F2P6 - 16MHz 4KB Ultra-Low-Power MCU | ST
STM8L151F2P6

STM8L151F2P6 - 16MHz 4KB Ultra-Low-Power MCU | ST

STMicroelectronics STM8L151F2P6 is an 8-bit ultra-low-power microcontroller with a 16 MHz maximum clock, 4 KB Flash memory, 1 KB RAM, and a 20-pin TSSOP package. The STM8L151F2P6 supports a 1.8 V to 3.6 V supply range and provides up to 16 MIPS while retaining the CISC architecture and peripheral integration of the STM8L platform. An ultra-low-power microcontroller is an embedded controller designed to maintain useful processing, sensing, and communication functions while minimizing energy use during idle, sleep, and stop operating states. Within the product hierarchy, the STM8L151F2P6 is an 8-bit MCU, an embedded processing IC, and a member of the STM8L EnergyLite family. This makes it suitable for compact, battery-operated or energy-conscious systems in which low active and standby power are more important than high arithmetic throughput. Key device attributes include 16 MHz operation, 4 KB Flash, 1 KB RAM, a 1.8 V to 3.6 V supply range, and a 20-pin TSSOP package. The enhanced STM8 CPU core can execute up to 16 MIPS at 16 MHz, giving embedded control loops more scheduling capacity than lower-frequency 8-bit implementations. Its low-density integration also helps reduce board area, external memory requirements, and system complexity for compact control products. The STM8L151F2P6 belongs to a CISC-based STM8 architecture optimized for efficient control code rather than application-processor workloads. Its 4 KB Flash stores firmware while 1 KB RAM supports working state, stack operations, and peripheral buffering. The manufacturer product page identifies the STM8L151F2/3 low-density family as an ultra-low-power MCU family, while distributor data confirms the specific device's 8-bit architecture, 16 MHz clock, memory configuration, and package format. Typical applications include low-power sensor nodes, compact industrial controls, battery-powered instruments, energy-metering peripherals, home automation endpoints, and embedded monitoring modules. The 20-pin TSSOP package is particularly useful where a conventional large QFP footprint would be unnecessary but exposed-package or fine-pitch assembly would also be undesirable. Firmware and peripheral configuration should still be checked against the complete manufacturer datasheet before production use. Designers should account for the 1.8 V to 3.6 V operating range, verify that every connected sensor and actuator supports the selected rail, and confirm the exact pin functions in the manufacturer pinout. Low-power operation depends on firmware, clock configuration, peripheral activity, and board leakage, so measured current cannot be inferred from the headline 16 MHz specification alone. This product record combines the verified manufacturer and distributor information, a lifecycle assessment, procurement pricing, family alternatives, and practical selection guidance. It is intended to help engineers identify whether the 20-pin STM8L151F2P6 offers the required balance of Flash, RAM, speed, voltage, package size, and ultra-low-power behavior before beginning PCB and firmware development.

RFQ Kontak
STM8L151F3P3 - 16MHz 8KB Flash MCU | STMicroelectronics
STM8L151F3P3

STM8L151F3P3 - 16MHz 8KB Flash MCU | STMicroelectronics

The STMicroelectronics STM8L151F3P3 is an 8-bit ultra-low-power STM8L EnergyLite microcontroller with a 16 MHz enhanced STM8 CPU core, 8 KB Flash memory, and a 20-pin TSSOP package. Its headline specifications are 16 MHz operation, 8 KB Flash memory, and a 1.8 V to 3.6 V supply range, making it suitable for compact, battery-operated embedded systems. What is an ultra-low-power microcontroller? An MCU integrates a processor, programmable memory, peripherals, and I/O on one semiconductor device. The STM8L family is designed for energy-efficient embedded control, where the system may spend substantial time in low-power states between sensor readings, user actions, or communications. In the hierarchy of electronic components, an MCU is a semiconductor, a microcontroller, and an embedded processing device used for control and automation. The verified device information identifies an enhanced STM8 CPU core capable of up to 16 MIPS at 16 MHz, 8 KB Flash organized as 8K x 8, and 1 KB of RAM as indicated by the comparison data. The 20-pin TSSOP package supports surface-mount assembly and is specified for an operating supply of 1.8 V to 3.6 V. The MCU is positioned for low-power embedded control rather than high-performance computing, providing a balanced combination of processing speed, memory, and compact packaging. The STM8L151F3P3 can be used in sensor nodes, battery-powered instruments, simple industrial controls, consumer accessories, and low-power monitoring systems. Its 8-bit architecture is appropriate for sequential control, parameter reading, state management, and communication tasks where application complexity does not require a larger processor. Its TSSOP-20 package is also useful when a design needs a modest pin count and a conventional leaded surface-mount footprint. When designing a board around the STM8L151F3P3, verify the exact pin assignments and peripheral multiplexing in the manufacturer datasheet before finalizing the PCB. Provide stable decoupling near the power pins, confirm the clock and reset requirements, and account for the 1.8 V to 3.6 V supply range. Firmware should also be tested across the intended temperature, voltage, and low-power operating conditions. This product page combines the verified manufacturer and distributor information with practical sourcing, comparison, and design guidance. Pricing and availability should be checked with authorized distributors, while the manufacturer datasheet remains the controlling reference for electrical limits, pinout, memory behavior, and peripheral operation.

RFQ Kontak
STM8L151F3P6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151F3P6

STM8L151F3P6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151F3P6 is an 8-bit ultra-low-power microcontroller with up to 16 MIPS at 16 MHz, 8 KB of Flash memory, and a 20-pin TSSOP package. It is designed for compact, power-constrained embedded systems requiring low-power operation, RTC functions, timers, and integrated data EEPROM. The STM8L151x2/3 family uses an enhanced STM8 CPU core with a CISC architecture and optimized low-power modes. An ultra-low-power microcontroller is a semiconductor device designed to minimize energy consumption during standby, sleep, and active operation. The STM8L151x2/3 family combines an 8-bit CPU core, Flash program memory, EEPROM, timers, GPIO, communication peripherals, and low-power management in one compact package. This device family is suitable when a controller must balance fast control-loop execution with restricted energy budgets. The STM8L151F3P6 provides 8 KB of Flash, up to 256 bytes of EEPROM according to the device description, and operation up to 16 MHz. It is identified as an STM8L EnergyLite microcontroller in distributor listings and is available in a 20-pin TSSOP package. The part is intended for low-voltage embedded designs where the MCU must handle control, sensing, communication, and periodic sensing without a high-power processor. The enhanced STM8 core provides increased processing power while retaining CISC advantages such as compact instruction representation and efficient code density. A 24-bit linear addressing space supports organized access to memory-mapped peripherals. The low-power architecture helps designers select suitable operating modes during idle periods and wake the controller for defined events or scheduled tasks. Typical applications include low-power sensor nodes, industrial monitoring modules, battery-powered instruments, building automation controls, portable measurement equipment, and embedded consumer devices. The 20-pin TSSOP package is useful for PCB layouts where a relatively small through-hole-style surface-mount footprint is preferred and when the design does not require a large high-pin-count microcontroller. When designing around STM8L151F3P6, verify the exact peripheral configuration, clock setup, pin multiplexing, memory limits, and low-power behavior in the manufacturer datasheet. The P6 suffix and package markings should be confirmed against the ordered device, and firmware should be tested for all required sleep, wake-up, RTC, and communication paths before production release. This page combines the verified manufacturer product information, distributor specifications, package details, and application-oriented design guidance. It also distinguishes electrically similar devices from true pin-for-pin drop-in alternatives, helping engineers make a defensible sourcing or redesign decision rather than treating unrelated low-power MCUs as direct substitutes.

RFQ Kontak
STM8L151G3U6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G3U6

STM8L151G3U6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151G3U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz STM8 CPU, 8 KB Flash memory, 1 KB RAM, and a 28-pin UFQFPN 4x4 mm package. Its operating supply range is 1.8 V to 3.6 V, and the enhanced STM8 core provides up to 16 MIPS at 16 MHz for energy-efficient embedded control. The device is identified as an STM8L EnergyLite MCU and is suitable for compact, battery-operated systems. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while monitoring sensors, controlling actuators, and managing communication or timing functions. The STM8L family belongs to the 8-bit microcontroller hierarchy, where an embedded MCU integrates processor core, memory, GPIO, timers, and communication peripherals on one package. This integration reduces component count and supports portable, low-power industrial, sensor, consumer, and medical-control designs. Key verified features include 8 KB of Flash organized as 8K x 8, 16 MHz maximum clocking, 8-bit processing, a 1.8 V to 3.6 V supply range, and 28-pin UFQFPN packaging. The manufacturer describes the STM8L151x2/3 devices as offering increased processing power while maintaining an ultra-low-power architecture. The small 4x4 mm package supports space-constrained designs, while the exposed-pad construction requires careful PCB thermal and layout implementation. The STM8L151G3U6 is primarily controlled by its enhanced 8-bit STM8 core. Its memory arrangement provides a practical balance between firmware storage and working RAM for compact control tasks. The 16 MHz operating frequency supports responsive firmware execution, while the low-voltage operating range allows operation from common low-energy supply rails when the system power architecture supports them. Typical applications include battery-powered sensor nodes, compact industrial controllers, low-power IoT equipment, building automation modules, portable measurement products, and small consumer-device controllers. The device is particularly appropriate when board area, standby energy use, and a simple 8-bit control platform matter more than high arithmetic throughput. Designers should place decoupling capacitors close to the supply pins, follow the manufacturer’s exposed-pad land-pattern requirements, and verify signal-level compatibility with connected peripherals. Do not infer pin functions from the package count alone; use the official STM8L151G3 documentation for the complete pinout and exposed-pad connection. This page combines verified distributor and manufacturer information, same-family drop-in alternatives, comparison data, and practical design guidance for engineers evaluating STM8L151G3U6 sourcing and board compatibility.

RFQ Kontak
STM8L151G4U3 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G4U3

STM8L151G4U3 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151G4U3 is an ultra-low-power 8-bit STM8L microcontroller with a 16 MHz maximum CPU frequency, 16 KB of embedded Flash memory, and a 28-pin UFQFPN package measuring 4 mm by 4 mm. It operates from a 1.8 V to 3.6 V supply range, making it suitable for compact, battery-operated, and energy-conscious embedded systems. An ultra-low-power microcontroller is an integrated circuit designed to execute firmware while minimizing energy consumption. The STM8L family combines an 8-bit CPU, embedded nonvolatile memory, analog and digital peripherals, and low-power operating modes in one device. This positions the STM8L151G4U3 within the hierarchy of microcontroller, embedded processor, semiconductor, and low-power system-on-chip design. Key features include 16 KB of Flash, a 16 MHz CPU, and up to 1 KB of data EEPROM. The peripheral set described for this device includes an RTC, LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators. These integrated resources can reduce external component requirements in meter, sensor-node, industrial-control, and low-power consumer designs. The STM8L architecture provides a compact CISC-based platform with a broad selection of communications, timing, analog-conversion, and display-related peripherals. Because the verified product information identifies the part as an 8-bit ultra-low-power MCU, it is particularly appropriate for control tasks that require deterministic peripheral access and low standby power rather than the processing throughput of a 32-bit Cortex-M processor. Typical applications include low-power sensing nodes, compact industrial controllers, battery-powered meters, panel-control systems, and communication-enabled sensor modules. The integrated USART, I2C, and SPI interfaces support serial sensors and transceivers, while the ADC, DAC, and comparators enable local measurement, signal generation, and threshold detection without requiring separate analog devices. Designers should verify the exact pin multiplexing, clock configuration, low-power current, and peripheral operating limits in the manufacturer datasheet before layout freeze. A 28-pin UFQFPN also requires careful escape-routing and inspection because its fine-pitch pads are not suitable for conventional hand soldering without appropriate equipment and process control. This product page consolidates verified distributor pricing, package information, lifecycle-oriented selection guidance, and traceable comparison data with practical design notes. It is intended to help engineers identify the correct low-power MCU and evaluate genuinely same-package alternatives without implying that different architectures or package variants are drop-in replacements.

RFQ Kontak
STM8L151G4U6 - 16MHz 16KB Ultra-Low-Power MCU | ST
STM8L151G4U6

STM8L151G4U6 - 16MHz 16KB Ultra-Low-Power MCU | ST

The STMicroelectronics STM8L151G4U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz core, 16 KB of Flash memory, 2 KB of RAM, and a 28-pin UFQFPN package measuring 4 x 4 mm. Its 1.8 V to 3.6 V operating supply range and low-power-oriented STM8L architecture suit compact embedded products that need efficient control, sensing, communication, and low standby consumption. A microcontroller is an integrated circuit that executes embedded control software and connects external peripherals through digital and analog I/O. In the device hierarchy, the STM8L151G4U6 is an 8-bit MCU, part of the STM8L ultra-low-power family, and part of the broader embedded processor category. Its integrated flash memory stores firmware, while RAM supports execution state and application data. The supplied product data identifies 16 KB of Flash, 2 KB of RAM, a 16 MHz maximum clock, 28 pins, and operation from 1.8 V to 3.6 V. Search results also associate the STM8L151x4/6 family with RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparators. Exact peripheral availability, GPIO mapping, electrical limits, and low-power current figures must be checked against the manufacturer documentation for the exact ordering code. At 16 MHz, the device provides substantially more processing headroom than lower-clock 8-bit designs while retaining the simplicity of the STM8 architecture. The compact 4 x 4 mm UFQFPN package supports space-constrained assemblies, but its fine pitch requires careful PCB layout, solder inspection, and adequate thermal management during reflow and production. Typical uses include low-power sensor nodes, compact industrial controllers, battery-powered instruments, meter and keypad interfaces, communication modules, and small consumer appliances. Engineers should select peripheral functions by device variant rather than assuming every member of the STM8L151 family has identical resources. Firmware migration also depends on the exact pinout, clock tree, memory map, startup file, and development-tool configuration. For PCB implementation, verify the exposed-pad connection, decoupling requirements, SWIM programming access, and all alternate-function assignments in the official package drawing. Validate low-power modes against the actual peripheral set because stopping timers, ADC conversion, serial interfaces, or LCD-related circuitry can change achievable standby current. This page consolidates verified distributor specifications, family-level capabilities, sourcing references, and strict drop-in replacement findings. It separates confirmed STM8L151G4U6 values from family-level information so engineers can make a defensible sourcing and design decision without assuming unverified electrical or lifecycle details.

RFQ Kontak
STM8L151G6U3 - 16MHz 32KB Low-Power MCU | ST
STM8L151G6U3

STM8L151G6U3 - 16MHz 32KB Low-Power MCU | ST

STMicroelectronics STM8L151G6U3 is an ultra-low-power 8-bit microcontroller with a 16 MHz maximum clock, 32 KB of Flash memory, and a 28-pin UFQFPN package measuring 4 mm by 4 mm. It operates from a 1.8 V to 3.6 V supply and targets compact embedded systems that require energy-conscious control, mixed-signal measurement, and communication peripherals without requiring a high-end 32-bit processor. An ultra-low-power microcontroller, or ULP MCU, is an energy-efficient semiconductor designed to remain responsive while consuming minimal power during active operation, standby, and wake-up transitions. The STM8L151 belongs to the STM8L EnergyLite family within STMicroelectronics' broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor devices. Its low-power architecture makes it suitable for battery-operated sensors, portable instruments, industrial controls, and connected products that spend substantial time waiting for events. The STM8L151G6U3 provides 32 KB Flash, 2 KB of on-chip RAM, a 12-bit ADC, and a DAC according to the supplied manufacturer and distributor data. Its integrated peripheral set also includes an RTC, data EEPROM, timers, USART, I2C, SPI, comparators, and LCD support. These resources allow a compact design to sample analog inputs, maintain real-time information, communicate with sensors or external controllers, and drive a segment LCD without requiring several separate devices. The enhanced STM8 CPU core operates at up to 16 MHz, providing up to 16 MIPS according to the manufacturer family information. The device combines a 28-pin 4 mm by 4 mm UFQFPN package with analog and serial-interface functions, enabling high component density in space-constrained products. Its exact peripheral configuration, current consumption, timing limits, and absolute electrical limits should be confirmed against the current STMicroelectronics datasheet before a production design is released. Typical applications include low-energy environmental sensors, battery-powered measurement modules, compact industrial controllers, wearable accessories, smart-home endpoints, and small instrumentation products. For a sensor node, the ADC and timers can support periodic measurements while the RTC and low-power modes help control idle consumption. The USART, I2C, and SPI interfaces support external sensors, transceivers, memory, and host controllers, while LCD support is useful for local human-readable output. A critical design consideration is supply-voltage headroom. The MCU operates from 1.8 V to 3.6 V, so battery chemistry, regulator dropout, transient response, and brownout behavior must be evaluated together. Decoupling capacitors should be placed close to the supply pins, unused inputs should be configured appropriately, and low-power modes should be validated with the intended peripheral states rather than only with the core active. This page consolidates verified manufacturer and distributor information, package and interface guidance, pricing context, and practical application analysis. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet, supporting faster engineering comparison without treating unverified alternatives as drop-in replacements.

RFQ Kontak
STM8L151G6U6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics
STM8L151G6U6

STM8L151G6U6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics

The STM8L151G6U6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family. It operates at a clock speed of 16 MHz and features 32 KB of Flash memory, 2 KB of SRAM, and 1 KB of data EEPROM. The device is housed in a compact 28-pin UFQFPN (4x4 mm) package, making it ideal for space-constrained applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), which processes data in 8-bit chunks. It integrates a processor core, memory (Flash, SRAM, EEPROM), and programmable peripherals (timers, communication interfaces, ADC, DAC) on a single integrated circuit. In the system hierarchy, an 8-bit MCU is a type of embedded controller, which falls under the broader category of microcontrollers, which are themselves a subset of integrated circuits used in embedded systems. The STM8L151G6U6 is specifically optimized for ultra-low-power operation, targeting battery-powered and energy-harvesting applications. Key features of the STM8L151G6U6 include a 16 MHz CPU clock, 32 KB Flash memory, 2 KB SRAM, and 1 KB data EEPROM. It also integrates a 12-bit ADC, a 12-bit DAC, two comparators, an RTC, LCD driver, and multiple communication interfaces (USART, I2C, SPI). The device supports a wide supply voltage range of 1.8V to 3.6V, and its ultra-low-power modes include a Halt mode with 0.35 µA current consumption, making it suitable for battery-powered devices. The STM8L151G6U6 is built on ST's low-power 8-bit core, which is designed for energy efficiency. It features a modular peripheral set that is shared across STM8 and STM32 families, simplifying code migration. The device includes a 4-channel DMA controller, which offloads data transfer tasks from the CPU, improving overall system performance. The ultra-low-power design extends battery life in portable applications. Typical applications include portable medical devices, sensor nodes, smart meters, and industrial control systems. The device's low power consumption and rich peripheral set make it ideal for applications requiring long battery life and reliable operation. For example, in a wireless sensor node, the STM8L151G6U6 can wake up periodically, read sensors, and transmit data via its USART or SPI interface, then return to Halt mode to conserve power. When designing with the STM8L151G6U6, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to the VDD and VSS pins. The device's low-power modes require careful configuration of the clock system and peripheral clocks to achieve the specified current consumption. Additionally, the UFQFPN-28 package has an exposed pad that should be connected to ground for optimal thermal performance.

RFQ Kontak
STM8L151K4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151K4T6

STM8L151K4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L151K4T6 is an ultra-low-power 8-bit STM8L microcontroller rated up to 16 MHz, with 16 KB of Flash memory, 2 KB of RAM and 1 KB of data EEPROM in a 32-pin LQFP (7x7) package. The device combines an STM8 8-bit CPU with low-power operation, analog conversion, timers, RTC capability, LCD support, and serial peripherals, making it suitable for compact embedded systems that must balance processing capability, low standby demand and board area. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while retaining the processing, sensing and communication functions needed for embedded products. The STM8L151 belongs to the STM8L hierarchy of low-power 8-bit MCUs, with the STM8L151K4 family positioned between simpler low-cost STM8 devices and higher-density members with larger memory capacities. Its analog and timing resources allow the MCU to supervise sensors, operate human-interface controls and manage low-speed communications without requiring several discrete components. Key features include 16 KB Flash, 2 KB RAM, 1 KB EEPROM and a maximum 16 MHz clock. Integrated resources include an ADC, DAC, comparators, timers, USART, I2C and SPI interfaces, plus RTC and LCD-related capabilities identified for the STM8L151 family. These peripherals reduce external component count in battery-operated instruments, small industrial controls, sensor nodes and compact consumer equipment. The STM8L architecture is based on an 8-bit CISC-style core and provides an economical platform for control-oriented firmware. Its combination of EEPROM, RTC capability, analog peripherals and multiple communication interfaces allows designers to retain calibration data, acquire analog inputs, produce an analog output and exchange data with external sensors or actuators from one controller. The 32-LQFP package also exposes enough I/O for keypad scanning, display control and peripheral connections in space-constrained designs. Typical applications include battery-powered measurement instruments, compact energy meters, industrial sensor interfaces, LCD-based control panels, environmental monitoring, portable accessories and low-power building-control nodes. Its serial interfaces support sensors and external transceivers, while the timers and comparators simplify periodic sampling, edge detection and threshold-based control tasks. The principal design consideration is the operating-voltage envelope. Distributor data identifies 2.5 V and 3.3 V supply use, while an operating-power-supply indication of 3.6 V also appears in available material; designers must resolve the exact minimum and maximum limits against the manufacturer datasheet for the selected voltage variant before final schematic release. External bypass capacitors, oscillator requirements and unused-pin handling should follow ST's reference guidance. This page consolidates verified manufacturer and distributor information, same-package alternatives, parameter comparisons and practical selection guidance. It adds engineering context around memory, interfaces, analog functions and supply constraints while clearly identifying specifications that still require confirmation from the manufacturer datasheet.

RFQ Kontak
STM8L151K6T3 - 8-Bit 16MHz Ultra-Low-Power MCU | STMicroelectronics
STM8L151K6T3

STM8L151K6T3 - 8-Bit 16MHz Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K6T3 is an 8-bit ultra-low-power STM8L EnergyLite microcontroller with a 16 MHz clock, 32 KB Flash memory, 1 KB data EEPROM, and a 32-LQFP 7 x 7 mm package. It is designed for energy-sensitive embedded control applications that require low-power operation, compact integration, and embedded peripherals. The device operates from 1.8 V to 3.6 V and is available in the -40°C to +85°C temperature range. Its 41 I/O ports provide substantial external connectivity for sensors, human-interface equipment, and compact control systems. An ultra-low-power 8-bit microcontroller is a category of embedded semiconductor intended to minimize energy consumption while executing control tasks. Within the broader hierarchy, the STM8L151K6T3 belongs to the STM8L family, STM8 8-bit microcontrollers, and the microcontroller product class. Its EnergyLite architecture is relevant to battery-operated instruments, low-power sensors, meters, and portable equipment where duty-cycled sleep operation can extend operating time between battery replacements or maintenance visits. The STM8L151K6T3 provides 32 KB of Flash for firmware, 1 KB of data EEPROM for retained parameters, and a maximum clock frequency of 16 MHz. Its 41 I/O ports support external interfacing, while integrated 12-bit ADC and timer resources reduce the need for separate components. The 1.8 V to 3.6 V operating range accommodates common 2.5 V and 3.3 V system rails. The 32-LQFP package measures 7 x 7 mm and supports surface-mount manufacturing. The STM8L151K6T3 is positioned between simple 8-bit controllers and more complex 32-bit microcontrollers. It provides the direct addressing and compact peripheral set associated with the STM8 family while retaining a 16 MHz operating clock. The 32 KB Flash capacity supports more structured firmware than the smallest STM8 devices, and the inclusion of EEPROM and an ADC makes the part suitable for self-contained measurement and control nodes without extensive external circuitry. Typical applications include compact industrial control modules, battery-powered environmental sensors, electronic utility meters, compact keypads, and low-power human-interface devices. In a sensing product, the MCU can acquire analog measurements through its 12-bit ADC, apply control logic, and manage a low-duty-cycle operating profile. The 41 available I/O ports also make it practical to connect multiple digital inputs, displays, indicators, or communication interfaces. Designers should review the complete manufacturer datasheet for the exact pin assignments, peripheral multiplexing, oscillator options, and low-power modes before laying out the PCB. Particular attention should be paid to supply decoupling, analog-input routing, unused I/O handling, and the configuration of pins shared by multiple peripherals. These details are essential for reliable low-power operation and avoiding conflicts between LCD, timer, ADC, and communication functions. This page consolidates the verified manufacturer, distributor, and cross-reference information for the STM8L151K6T3, then adds application guidance, parameter comparisons, procurement context, and drop-in replacement analysis. It is intended to help engineers identify whether the 32 KB, 16 MHz, 8-bit configuration matches their PCB and firmware requirements before committing to a design.

RFQ Kontak
STM8L151K6T6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics
STM8L151K6T6

STM8L151K6T6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8L151K6T6 is an ultra-low-power 8-bit EnergyLite microcontroller with a 16 MHz clock, 32 KB Flash memory, 2 KB RAM and a 32-pin LQFP 7 x 7 mm package. It operates from 1.8 V to 3.6 V according to the available specification data. The device belongs to the medium-density STM8L151x4/6 family, combining an economical 8-bit architecture with low-power-oriented embedded features for compact control systems. An 8-bit microcontroller is a microprocessor core integrated with Flash memory, RAM, timers, serial interfaces, GPIO and other peripherals on one semiconductor package. The STM8L family sits within the broader embedded-controller hierarchy: MCU → microcontroller → embedded processing IC → semiconductor. Its low-power positioning makes it useful where the system must continue monitoring or controlling sensors while limiting energy consumption between active operations. The verified feature set includes 16 MHz maximum clock speed, 32 KB of Flash organized as 32K x 8, 2 KB RAM, an 8-bit instruction set and a 32-pin LQFP package. One indexed source lists 41 I/O ports, although the exact pin names and exposed functions were not included in the supplied data. The LQFP-32 package provides a conventional surface-mount footprint with accessible leads, making the MCU suitable for compact control boards assembled with standard pick-and-place and reflow processes. The STM8L151x4/6 architecture is designed for embedded control rather than high-compute workloads. Its Flash memory supports firmware storage, while the 2 KB SRAM provides working memory for control logic, state variables and peripheral buffers. Operating at up to 16 MHz provides sufficient processing bandwidth for digital control, sensor aggregation, human-interface input, communication tasks and supervisory functions without requiring a higher-complexity MCU. Typical uses include low-power sensor controllers, compact industrial control modules, battery-operated instruments, LCD-oriented control panels, access-control terminals and small automation nodes. The 1.8 V minimum operating voltage supports low-energy system architectures, while the 3.6 V maximum accommodates conventional 3.3 V equipment when the designer applies suitable decoupling and verifies absolute maximum limits. Designers should preserve the STM8L151x4/6 power and peripheral configuration during firmware bring-up, including clock initialization, flash programming, GPIO assignment and low-power mode transitions. Component availability, complete electrical characteristics and exact pin functions should be confirmed against the current STMicroelectronics datasheet before a production layout is released. This product record combines verified distributor specifications, an official manufacturer resource, comparison data and engineering-oriented application guidance. It also distinguishes genuine package-compatible options from broader functional alternatives, helping procurement and design teams evaluate replacement risk without relying on part-name similarity alone.

RFQ Kontak
STM8L151K6U3 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151K6U3

STM8L151K6U3 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K6U3 is an ultra-low-power 8-bit microcontroller with a 16 MHz core, 32 KB Flash memory, and a 32-pin 5 mm × 5 mm UFQFPN package. The verified distributor listing identifies the device as an STM8L EnergyLite MCU with 32 KB Flash, while the manufacturer positions the STM8L151K6 family as part of the STM8L ultra-low-power 8-bit portfolio. It combines an 8-bit CPU with embedded analog and serial peripherals for compact control, sensing, communications, and low-duty-cycle embedded products. An ultra-low-power microcontroller is an embedded semiconductor designed to complete control tasks while minimizing energy consumption between active processing intervals. In the system hierarchy, the STM8L151K6U3 belongs to the microcontroller class, within embedded processors and power-conscious embedded control. Its combination of Flash program memory, data EEPROM, real-time-clock capability, LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators allows one device to consolidate several discrete functions on a small PCB. Verified feature information identifies up to 32 KB Flash, 1 KB data EEPROM, RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparators. The distributor record also confirms 8-bit operation, a 16 MHz maximum frequency, and 32 KB organized as 32K × 8. These resources suit firmware that includes user-interface updates, sensor acquisition, local data logging, communication, timekeeping, and low-power state management without requiring a separate real-time clock or interface-conversion circuitry. The STM8L151K6U3 belongs to STMicroelectronics' STM8L low-power architecture rather than the ARM-based STM32 families. That distinction matters when replacing it: software, instruction set, peripheral implementation, and toolchain assumptions may differ even when another microcontroller offers similar nominal features. ST's product page identifies the medium-density STM8L151x4/6 devices, allowing engineers to distinguish the target from lower-density STM8L151x2/3 parts when planning a redesign. Typical applications include battery-powered utility meters, compact environmental sensors, industrial control modules, wearable accessories, instrument panels, and connected sensor nodes. The target's integrated ADC and comparators suit local analog monitoring, while USART, I2C, and SPI support external sensors, transceivers, displays, and data loggers. The RTC is useful for time-stamped measurements and scheduled low-power operation, although exact current, voltage, timer, ADC, and package-registration details must be taken from the manufacturer documentation. PCB implementation should follow the exact 32-pin UFQFPN land pattern and exposed-pad requirements in the manufacturer package information. Place decoupling capacitors close to supply pins, route sensitive analog inputs away from fast-switching nodes, and confirm thermal-pad soldering against the assembly process. Firmware and peripheral configuration should also use STMicroelectronics' STM8 toolchain rather than assuming STM32 compatibility. This product record combines verified manufacturer positioning, distributor specifications, sourcing links, interface coverage, and replacement-risk guidance. It is intended to accelerate engineering evaluation while clearly separating confirmed facts from parameters that still require confirmation from the official datasheet.

RFQ Kontak
STM8L151K6U6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics
STM8L151K6U6

STM8L151K6U6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8L151K6U6 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller operating up to 16 MHz, with 32 KB of Flash memory and a 32-pin UFQFPN package measuring 5 x 5 mm. The device combines a CISC processor core, LCD support, real-time-clock capability and 1 KB of data EEPROM in an energy-conscious platform for embedded control. An ultra-low-power microcontroller is an integrated semiconductor that combines a processor core, memory and peripherals while prioritizing low current consumption during active operation and sleep. The STM8L family belongs to the STM8 8-bit microcontroller hierarchy and addresses battery-powered instruments, compact sensors and low-power industrial products where energy efficiency and a compact footprint are more important than high arithmetic throughput. Verified listing data identifies up to 32 KB of programmable Flash, 16 MHz maximum clock speed, 41 I/O ports, LCD support and a real-time clock. The STM8L151K6U6 also includes 1 KB of data EEPROM, allowing calibration values, configuration data and operating counters to be retained without consuming Flash. Its 1.8 V to 3.6 V supply range supports both 2 V and 3.3 V system architectures. The STM8L architecture provides a direct CISC execution model and a broad set of embedded peripherals rather than an Arm Cortex application processor. Verified distributor information identifies the MCU as an 8-bit device with 16 MHz performance and 32 KB of Flash. The K6U6 designation corresponds to a 32-pin UFQFPN configuration, with an exposed thermal and electrical connection area supporting heat transfer and PCB integration. Typical uses include low-energy sensor nodes, compact LCD instruments, portable measurement products, battery-operated controls and embedded industrial modules. The LCD interface and real-time clock are particularly useful in metering and user-interface designs, while the 41 I/O ports provide connections for sensors, switches, displays and communication peripherals in a small 5 x 5 mm package. Designers should review the complete pin assignment and exposed-pad requirements in the manufacturer datasheet before layout because the supplied verification data does not publish a complete numbered pin table. Decoupling, exposed-pad grounding, programming access and low-power configuration also require board-level validation against the official device documentation. This page consolidates verified manufacturer and distributor information, transparent sourcing limitations, package guidance and engineering-focused comparisons for the STM8L151K6U6. It distinguishes directly comparable STM8L variants from devices that require package or firmware changes and helps procurement teams evaluate the exact 32 KB, 32-pin ordering code.

RFQ Kontak
STM8L151R8T6 - 16MHz 8-Bit 64KB Flash MCU | STMicroelectronics
STM8L151R8T6

STM8L151R8T6 - 16MHz 8-Bit 64KB Flash MCU | STMicroelectronics

The STMicroelectronics STM8L151R8T6 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz maximum core frequency, 64 KB of Flash program memory and 4 KB of RAM, housed in a 64-LQFP 10 x 10 mm package. It operates across a 1.8 V, 2.5 V or 3.3 V supply range and is designed for battery-operated, sensor-driven and connected embedded products. STM8L microcontrollers belong to the 8-bit microcontroller and energy-management MCU hierarchy, combining an enhanced STM8 CPU core with low-power operating modes, LCD-oriented peripherals and integrated analog resources. Their role in a system is to execute local control and measurement functions while keeping current consumption low enough for long operating life from a compact energy source. Key characteristics include 64 KB of embedded Flash, 4 KB of SRAM, a maximum clock frequency of 16 MHz and a 64-LQFP package. The STM8L151R8 family is positioned for applications requiring a balance of processing capability, low standby consumption and compact package size. The provided manufacturer and distributor references identify the device as part of the STM8L151x6/8 ultra-low-power family, which also includes STM8L152 and STM8L162 variants. The STM8L151R8T6 is suitable for energy-harvesting meters, industrial sensor nodes, wearable accessories, low-power control panels and small portable instruments. Because the device supports low-voltage operation and an LCD-oriented feature set, it can reduce the need for external components in display-driven designs. Its 64-LQFP outline also provides more I/O than the smaller STM8L151K6 package for designs requiring multiple external connections. When designing around this MCU, verify the exact operating voltage, pin multiplexing, clock configuration and low-power mode entry procedure against the STM8L151x6/8 datasheet. The STM8L151R8T6 is supplied in a tray-oriented ordering code, while STM8L151R8T6TR is the tape-and-reel ordering variant shown in distributor listings. The distinction between ordering formats is commercial rather than a change in the underlying device. This page combines verified manufacturer and distributor information with practical package, sourcing and design guidance. It also highlights the limits of the available data: detailed pin names, electrical timing curves, lifecycle declarations and volume pricing must be confirmed from the current manufacturer datasheet and authorized distributor inventory before a production release.

RFQ Kontak
STM8L152C6T6 - 8-bit Ultra-Low-Power MCU 32KB Flash | STMicroelectronics
STM8L152C6T6

STM8L152C6T6 - 8-bit Ultra-Low-Power MCU 32KB Flash | STMicroelectronics

The STM8L152C6T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family, featuring a 16 MHz STM8 core, 32 KB of Flash memory, 2 KB of RAM, and 1 KB of data EEPROM. It is housed in a 48-pin LQFP (7x7 mm) package and operates over a supply voltage range of 1.8V to 3.6V, with a temperature range of -40°C to 125°C. This device integrates a rich set of peripherals including an LCD driver, real-time clock (RTC), timers, USART, I2C, SPI, 12-bit ADC, 12-bit DAC, and comparators, making it ideal for battery-powered and energy-sensitive applications. An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, executing instructions on 8-bit words. It typically integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals (timers, communication interfaces, ADC) on a single die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but excels in ultra-low-power operation and cost-effectiveness for simple control tasks. The STM8L152C6T6 belongs to the STM8L ultra-low-power family, which is designed for applications where energy efficiency is paramount, such as portable medical devices, smart meters, and wireless sensor nodes. Key features of the STM8L152C6T6 include its ultra-low-power modes (Halt, Active-Halt, Wait) with current consumption as low as 0.35 µA in Halt mode, a 16 MHz CPU clock, and a 12-bit ADC with up to 28 channels. The integrated LCD driver supports up to 4x28 segments, enabling direct connection to segment LCDs without external drivers. The device also includes a true data EEPROM with up to 1 KB, allowing non-volatile data storage without external memory. The RTC provides accurate timekeeping with a separate clock domain, and the multiple communication interfaces (USART, I2C, SPI) facilitate connectivity with sensors and other peripherals. From a technical architecture perspective, the STM8L152C6T6 is built on a Harvard architecture with a 3-stage pipeline, achieving up to 16 MIPS at 16 MHz. The core includes an 8-bit accumulator, 16-bit index registers, and a 16-bit stack pointer, with a rich instruction set optimized for C and assembly programming. The device features a flexible clock system with multiple internal and external oscillator options, including a low-speed internal RC oscillator for low-power operation. The power management unit provides multiple low-power modes and a programmable voltage detector, enabling fine-grained control over energy consumption. Typical applications for the STM8L152C6T6 include smart meters (electricity, water, gas), portable medical devices (glucose meters, pulse oximeters), remote controls, and battery-powered sensor nodes. Its ultra-low-power consumption and integrated LCD driver make it particularly well-suited for devices that require long battery life and direct LCD display. The device is also used in industrial control and home automation systems where reliability and low power are critical. When designing with the STM8L152C6T6, engineers should pay attention to the power supply decoupling, placing a 100 nF capacitor close to each VDD pin and a 1 µF capacitor on the main supply. The VDDA pin should be connected to VDD through a ferrite bead to reduce noise for the ADC. Additionally, the LCD driver requires a charge pump capacitor (typically 100 nF) between the VLCD pin and ground, and the RTC requires a 32.768 kHz crystal for accurate timekeeping. Proper layout of the crystal and decoupling capacitors is essential for reliable operation.

RFQ Kontak
STM8L152C6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152C6U6

STM8L152C6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C6U6 is an ultra-low-power 8-bit microcontroller operating at up to 16 MHz, with 32 KB of Flash memory and a 48-pin UFQFPN package measuring 7 mm by 7 mm. It belongs to the STM8L EnergyLite family and integrates an RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and comparators for compact embedded-control designs. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, peripherals, and input/output interfaces on one device. The STM8L152C6U6 occupies the MCU → embedded controller → low-power microcontroller hierarchy and is designed to manage sensors, communications, displays, and control functions while minimizing energy consumption in battery-operated equipment. Verified product information identifies a 32 KB Flash configuration, 1 KB data EEPROM, 16 MHz maximum clock, and a 48-pin UFQFPN package. The integrated RTC and LCD support are especially useful for panel-based products, while USART, I2C, and SPI provide options for external sensors, transceivers, memory, and host connectivity. The ADC, DAC, and comparators broaden the device's usefulness for signal conditioning and threshold-based control. The STM8L152C6U6 is positioned for low-power embedded systems where an 8-bit architecture, compact package, and broad peripheral set are more appropriate than a high-performance application processor. Its feature set can reduce external component count by combining control, communication, analog conversion, timing, and display functions in one device. The manufacturer's product page identifies the device as a member of the STM8L ultra-low-power 8-bit family. Typical applications include battery-powered sensor nodes, industrial sensing modules, compact HMI controllers, meter and instrument electronics, communication equipment, and low-power embedded products. The 7 mm by 7 mm package supports dense PCB layouts, but pin assignment, exposed-pad requirements, power routing, and peripheral multiplexing must be checked against the manufacturer datasheet before layout release. For a new design, use the official STMicroelectronics documentation to confirm supply-voltage limits, pin multiplexing, decoupling requirements, clock configuration, and programming options. Because the supplied web data does not include a verified unit-price table or complete pin mapping, those details should be obtained from current manufacturer and distributor resources before purchasing or committing the PCB. This page combines verified distributor availability information, manufacturer-family positioning, package and memory details, interface capabilities, application guidance, and engineering-oriented sourcing notes. It is intended to support component selection and design planning without replacing the manufacturer datasheet for final electrical validation.

RFQ Kontak
STM8L152C8T6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152C8T6

STM8L152C8T6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C8T6 is an 8-bit ultra-low-power microcontroller with a 16 MHz enhanced STM8 CPU core, 64 KB Flash memory, 4 KB SRAM, and a 48-pin LQFP package measuring 7 mm by 7 mm. It operates from 1.8 V to 3.6 V and integrates an LCD controller, real-time clock, timers, USART, I2C, SPI, ADC, DAC, and comparators. An ultra-low-power microcontroller is an energy-efficient embedded processing device designed to conserve battery energy while still providing real-time control, communications, data acquisition, and user-interface functions. The STM8L152 family belongs to the STM8L low-power MCU hierarchy, combining an 8-bit CPU architecture with integrated analog and communication peripherals for compact, battery-operated equipment. Key features include 64 KB of Flash for firmware, 4 KB of data RAM, operation up to 16 MHz, and a 1.8 V to 3.6 V supply range. The integrated LCD controller supports compact segmented or matrix displays, while the RTC provides timekeeping for metering, logging, and scheduled control. The ADC, DAC, and comparators reduce the need for external discrete components in sensing and signal-generation systems. The STM8L152C8T6 combines several embedded peripherals on one device: USART for serial communication, I2C and SPI for bus-connected sensors and memory, timers for periodic and event-driven control, and analog converters for measurements and low-level output control. Its enhanced STM8 CPU core provides increased processing power relative to earlier STM8 devices while retaining an 8-bit architecture suited to control-oriented products. Typical applications include low-energy sensor nodes, compact industrial data loggers, battery-powered meters, LCD-equipped handheld instruments, smart building controls, and connected monitoring systems. Its 64 KB Flash capacity is useful for moderate protocol stacks, local configuration data, and application firmware, while the LCD and RTC simplify standalone instrument designs. Designers should preserve the required input-voltage range of 1.8 V to 3.6 V and account for the device's specified low-power operating modes. PCB layout should provide a stable decoupling network near the supply pins and adequate signal-integrity routing for external LCD, communication, and analog interfaces. Firmware selection must also verify that the selected clock and peripheral settings remain compatible with the intended energy budget. This product page combines verified manufacturer and distributor information with memory, interface, package, application, and replacement guidance. It also distinguishes confirmed drop-in candidates from options that require firmware, package, or feature verification before they can be used as true replacements.

USD $1.56 May Stock
STM8L152K4T6 - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics
STM8L152K4T6

STM8L152K4T6 - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152K4T6 is an 8-bit ultra-low-power microcontroller operating up to 16 MHz with 16 KB of Flash memory in a 32-pin LQFP 7 x 7 mm package. The device supports 2.5 V and 3.3 V operation and integrates 1 KB of data EEPROM, an LCD interface, real-time clock, timers, USART, I2C, SPI, ADC, DAC, and comparators. An ultra-low-power microcontroller is a compact embedded controller designed to maintain accurate digital control while minimizing energy use. The STM8L family belongs to the 8-bit microcontroller hierarchy and is intended for battery-powered, portable, industrial, sensing, and control products where low active and standby power can extend operating time between maintenance events. The STM8L152K4T6 combines that low-power positioning with a broad collection of mixed-signal and communications peripherals. Key features include 16 KB of Flash for firmware, 16 MHz maximum operating frequency, 1 KB of data EEPROM, and dedicated 2.5 V or 3.3 V supply operation. Integrated LCD support is useful in meter, keypad, and panel designs, while the RTC and low-power modes suit timekeeping applications. USART, I2C, and SPI interfaces provide practical options for sensors, transceivers, memory, and external controllers. The STM8L152K4T6 also integrates a 12-bit-class ADC, DAC, and comparators according to the family-level device description, allowing compact designs to perform analog measurement and control without requiring every conversion function in a separate IC. Its 32-pin LQFP package exposes the mixed-signal and digital resources required for medium-density embedded designs while remaining compatible with conventional leaded PCB assembly methods. Typical uses include low-energy sensor nodes, LCD utility meters, industrial condition-monitoring terminals, small appliance controllers, battery-powered instruments, and compact data-acquisition systems. The LCD interface, RTC, EEPROM, serial ports, ADC, DAC, and comparators make it especially useful when a single controller must combine display, measurement, timekeeping, and external communication. Designers should verify the exact pin configuration, operating limits, memory map, and peripheral electrical characteristics in the manufacturer datasheet before layout or production release. Production quantities also require board-level checks for decoupling, analog reference stability, LCD drive requirements, clock configuration, and low-power mode transitions. The verified distributor data supports availability and pricing references, but the available excerpts do not provide a complete timing, power-consumption, or absolute-maximum-rating table. This product page combines verified manufacturer and distributor information with practical purchasing, comparison, and design guidance. It distinguishes true same-package alternatives from broader functional alternatives and identifies unavailable technical details explicitly instead of estimating them.

RFQ Kontak
STM8L152K4U6 - 16MHz 8-Bit Ultra-Low-Power MCU | STMicroelectronics
STM8L152K4U6

STM8L152K4U6 - 16MHz 8-Bit Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152K4U6 is an 8-bit ultra-low-power microcontroller with a 16 MHz maximum clock, 16 KB of Flash memory, and a 32-pin UFQFPN package with an exposed pad, supplied in a tray. It belongs to the STM8L ultra-low-power family and integrates an RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and comparators. The device is designed for compact, low-energy embedded systems where a modest processing rate and broad peripheral integration are more important than high-bandwidth processing. An ultra-low-power microcontroller is a type of embedded controller optimized to minimize energy consumption during active operation, idle periods, and shutdown states. The STM8L family belongs to the broader hierarchy of 8-bit MCU, embedded controller, and semiconductor categories. STM8L152K4U6 devices combine an energy-conscious architecture with analog and digital peripherals, allowing a design to avoid adding separate interface, conversion, or timing components. Key features include a 16 MHz maximum operating frequency, 16 KB Flash, 1 KB data EEPROM, and 2.5 V or 3.3 V supply operation as identified by the verified distributor data. Integrated communication resources include USART, I2C, and SPI, while the analog subsystem includes an ADC, DAC, and comparators. The RTC and LCD controller support designs that must retain timekeeping or directly drive a low-power display without relying on a separate host processor. The STM8L architecture uses an 8-bit CISC-style microcontroller core and a modular peripheral arrangement. The verified source describes the STM8L152x4/6 family as part of the STM8L ultra-low-power 8-bit family. Because this product is specified as a 16 KB Flash device, firmware planning must be based on 16 KB rather than the larger memory capacity available to some family members. Exact RAM, current-consumption, accuracy, and absolute maximum ratings require confirmation in the manufacturer datasheet. Typical uses include battery-powered environmental sensors, compact industrial monitoring nodes, low-power instrument interfaces, LCD-based control panels, and portable measurement products. In these systems, the integrated ADC and comparators support local sensing, the serial interfaces support external sensors or data acquisition modules, and the RTC can provide time stamping or scheduled control functions without continuous external supervision. Design consideration: select decoupling and power-distribution components according to the manufacturer reference circuit, and verify the device's exact pin assignments before PCB layout because the verified excerpts do not provide a complete pin table. Do not infer that family members with different flash sizes, temperature grades, or package suffixes are interchangeable without checking their ordering information. The STM8L152K4U6 uses a 32-pin UFQFPN with an exposed pad, so land-pattern and thermal-via design must follow the official package drawing. This page consolidates the verified manufacturer and distributor excerpts, separates exact published facts from unresolved datasheet parameters, and identifies same-family alternatives with explicit engineering differences. It also provides comparison, sourcing, design, and selection guidance to reduce the risk of choosing an MCU based only on its displayed part number.

RFQ Kontak
STM8L152K6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152K6U6

STM8L152K6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152K6U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz maximum clock, 32 KB of Flash memory, and a 32-pin UFQFPN package measuring 5 mm by 5 mm. It belongs to the STM8L ultra-low-power family and is designed for energy-sensitive embedded control applications that require a compact microcontroller and a broad peripheral set. An ultra-low-power 8-bit microcontroller is a compact embedded-control platform designed to consume little energy while performing sensor reading, timing, communications, data acquisition, and local control functions. The STM8L family hierarchy connects this device to 8-bit microcontrollers, embedded controllers, and semiconductor components suited to battery-operated, industrial, and always-on equipment. Its small package also supports space-constrained designs. The verified product information identifies 32 KB of Flash, operation up to 16 MHz, and an STM8L152K6-class configuration in a 32-pin UFQFPN package. The product family also provides LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators according to the supplied datasheet search result. These interfaces make the device suitable for connected sensing, low-power instrumentation, and compact control panels. The STM8L152K6U6 combines an 8-bit CPU architecture with a broad set of embedded peripherals rather than relying on external interface devices. Timer resources can support periodic measurement and PWM generation, while the ADC and comparators can monitor analog inputs. USART, I2C, and SPI options permit integration with sensors, transceivers, memory, and human-interface modules. The 32 KB Flash capacity provides room for application firmware and configuration data. Typical uses include low-energy sensor nodes, compact environmental monitors, LCD-driven utility meters, industrial condition-monitoring equipment, and battery-powered accessories. In each case, the device can consolidate several small functions into one controller while keeping the board area limited by the 5 mm by 5 mm package. Designers must still verify operating limits, peripheral availability, and pin multiplexing against the complete manufacturer documentation. The principal design consideration is package and pin planning. A 32-pin UFQFPN footprint requires careful escape routing, exposed-pad thermal management where applicable, and reflow-profile control. Exact pin names, alternate functions, and electrical limits are not included in the supplied verified excerpts, so they should not be inferred from generic STM8 family diagrams before the complete manufacturer datasheet and package drawing are reviewed. This page consolidates the verified distributor and manufacturer information, package details, interface capabilities, pricing references, and constrained drop-in alternatives. It also identifies where complete electrical, pinout, lifecycle, and compliance data remain necessary for production qualification rather than presenting unverified values as specifications.

RFQ Kontak
STM8L152M8T6 - 16MHz 64KB Low-Power MCU | ST
STM8L152M8T6

STM8L152M8T6 - 16MHz 64KB Low-Power MCU | ST

The STMicroelectronics STM8L152M8T6 is an 8-bit STM8L EnergyLite ultra-low-power microcontroller with a 16 MHz maximum CPU frequency, 64 KB of embedded Flash memory, 2 KB of data EEPROM, and an 80-pin LQFP package measuring 14 x 14 mm. It integrates an RTC, LCD support, timers, and an enhanced STM8 CPU core, making it suitable for compact control systems where energy efficiency and peripheral integration are important. An ultra-low-power microcontroller is a semiconductor designed to complete control, measurement, and communication tasks while minimizing energy consumption during active operation, standby, and low-power states. The STM8L152M8T6 belongs to the STM8L family, combining a CISC-based STM8 core with embedded Flash and EEPROM in a surface-mount package. This hierarchy places it between general-purpose 8-bit microcontrollers and highly integrated embedded control devices. Key features include a maximum CPU frequency of 16 MHz, an 8-bit data bus, 64 KB of programmable Flash, and 2 KB of data EEPROM. The integrated RTC supports timekeeping-oriented designs, while LCD support reduces the component count of segmented human-interface panels. The STM8L152M8 series also provides dedicated timer resources, allowing the MCU to measure intervals, generate timing signals, and coordinate periodic system functions without an external timing IC. The enhanced STM8 CPU core provides increased processing power compared with earlier low-power members of the STM8 family, with operation up to 16 MHz. The device combines 64 KB Flash with a separate 2 KB EEPROM area for persistent data. Its 80-LQFP package provides a large pin count relative to the device footprint, supporting extensive peripheral routing while remaining compatible with standard surface-mount assembly. Operating voltage, RAM capacity, and detailed temperature limits are not stated in the supplied source data and should be confirmed in the manufacturer documentation before design release. Typical applications include low-power sensor-hub controllers, battery-operated instruments, industrial monitoring nodes, LCD-based user interfaces, real-time-clock systems, and compact embedded products that require more I/O than a small-package MCU can offer. The combination of 64 KB Flash, 16 MHz processing speed, EEPROM, RTC, LCD support, and timers allows a single device to consolidate several peripheral functions. Designers should confirm the complete pin assignment, supply-voltage limits, decoupling requirements, and low-power configuration strategy against the manufacturer datasheet before PCB release. Because the LQFP footprint contains 80 fine-pitch leads, board assembly should provide suitable land patterns, thermal-via strategy, and soldering profiles. Firmware must also validate the active, standby, and wake-up behavior required by the final power budget. This page consolidates verified manufacturer and distributor information, source-linked pricing, same-package alternatives, comparison parameters, and practical selection guidance. It is intended to accelerate engineering review while clearly identifying parameter areas that still require datasheet confirmation.

RFQ Kontak
STM8L152R8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics
STM8L152R8T6

STM8L152R8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics

The STM8L152R8T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics, part of the STM8L EnergyLite family. It features an enhanced STM8 CPU core running at up to 16 MHz, 64 KB of Flash memory, 4 KB of RAM, and 2 KB of data EEPROM. The device is housed in a 64-pin LQFP (10x10 mm) package and operates over a supply voltage range of 1.8V to 3.6V, with a temperature range of -40°C to 125°C. It integrates a rich set of peripherals including an LCD driver, real-time clock (RTC), timers, USART, I2C, SPI, ADC, DAC, and comparators, making it suitable for a wide range of low-power applications. An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, typically used in embedded systems where cost, power efficiency, and simplicity are prioritized over raw processing power. The STM8L152R8T6 belongs to the STM8L series, which is specifically designed for ultra-low-power operation, featuring multiple low-power modes (Wait, Low-power Run, Low-power Wait, Active-halt, and Halt) to minimize energy consumption. In the broader hierarchy, it sits as a microcontroller -> 8-bit MCU -> ultra-low-power MCU -> STM8L EnergyLite family, and is a key component in battery-powered and energy-harvesting applications. Key features include an ultra-low-power STM8 core with up to 16 MHz operation, 64 KB Flash with read-while-write capability, 4 KB RAM, 2 KB true data EEPROM with error correction code (ECC), and a 12-bit ADC with up to 28 channels. The device also integrates a 12-bit DAC, two comparators, an LCD driver supporting up to 8x40 segments, and a real-time clock with calendar and alarm functions. Its low-power design achieves typical current consumption of 3.4 µA in Halt mode with RTC on, and 0.35 µA in Halt mode without RTC, making it ideal for battery-powered devices. From a technical depth perspective, the STM8L152R8T6 uses a Harvard architecture with a 3-stage pipeline, allowing most instructions to execute in a single clock cycle. The Flash memory supports read-while-write, enabling firmware updates without halting the CPU. The device includes a flexible clock system with internal and external oscillators, a phase-locked loop (PLL) for frequency multiplication, and a clock security system for fail-safe operation. The ultra-low-power design is achieved through advanced process technology and multiple power domains, allowing independent power management of the core, peripherals, and I/O. Typical applications include portable medical devices (e.g., glucose meters, pulse oximeters), smart meters, wireless sensor nodes, and industrial control systems. The STM8L152R8T6's low power consumption and rich analog peripherals make it particularly well-suited for battery-powered applications where long battery life is critical. Its LCD driver and RTC also make it ideal for consumer electronics like digital thermometers and smart watches. When designing with this device, pay careful attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main power input. Additionally, configure the unused I/O pins to analog mode or low-power mode to minimize leakage current, and use the low-power modes effectively to extend battery life.

RFQ Kontak
STM8L162M8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics
STM8L162M8T6

STM8L162M8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics

The STM8L162M8T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family. It features a 16 MHz STM8 core, 64 KB of Flash memory, 4 KB of RAM, and 68 I/O pins in an 80-pin LQFP package (14x14 mm). Operating from 1.8V to 3.6V, it is designed for energy-efficient applications requiring long battery life. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, executing instructions sequentially. It integrates a processor core, memory (Flash, RAM), and peripherals (timers, UART, SPI, I2C, ADC) on one IC. In the hierarchy of embedded systems, an MCU is a type of integrated circuit, specifically a microcontroller, which falls under the broader category of semiconductors. The STM8L EnergyLite series is optimized for ultra-low-power operation, making it a key component in battery-powered and energy-harvesting designs. Key features include multiple low-power modes (Wait, Low-power Run, Low-power Wait, Active-halt, Halt) with current consumption as low as 0.3 µA in Halt mode, a 12-bit ADC, two comparators, a real-time clock (RTC), and a wide range of communication interfaces (USART, SPI, I2C). The device also includes an LCD driver (up to 8x40 segments), a 12-bit DAC, and a DMA controller, enhancing its versatility for sensor and display applications. The STM8L162M8T6 is built on a low-leakage CMOS process, achieving industry-leading energy efficiency. Its architecture supports fast wake-up times (as low as 4 µs) and dynamic voltage scaling, allowing designers to balance performance and power consumption. The integrated bootloader and in-application programming (IAP) capabilities simplify firmware updates in the field. Typical applications include portable medical devices (glucose meters, pulse oximeters), smart meters, wireless sensor nodes, and industrial process control. Its ultra-low-power modes and rich analog peripherals make it ideal for battery-powered systems where every microamp matters. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main supply. Use the low-power modes strategically to extend battery life, and ensure the crystal oscillator layout is clean to maintain accurate timing.

RFQ Kontak