Entegre Devreler

ADF4155BCPZ

ADF4155BCPZ - 4 GHz Fractional-N PLL | Analog Devices

The Analog Devices ADF4155BCPZ is a fractional-N or integer-N phase-locked-loop frequency synthesizer with a 4 GHz output, support for an external VCO operating up to 8 GHz, and a 24-WFQFN package with an exposed pad. It accepts a reference input from 500 MHz to 8 GHz and uses an external loop filter, VCO, and reference source to implement the complete frequency-synthesis function. A phase-locked loop, or PLL, is a feedback-controlled oscillator that locks a programmable output frequency to a stable reference. Integer-N operation preserves integer division, while fractional-N operation permits finer frequency steps through a programmable modulus. Within the broader hierarchy of clock and timing ICs, a PLL frequency synthesizer belongs to the clock-generator and phase-locked-loop family used to create stable, programmable RF and microwave signals. The ADF4155 supports fractional-N and integer-N synthesis, a programmable modulus, differential RFOUT+ and RFOUT− connections, and four programmable tail-current levels for the output differential pair. The exposed pad assists heat transfer from the device into the PCB. Its industrial temperature grade and surface-mount construction suit communication, instrumentation, and industrial control systems requiring accurate frequency generation. Internally, the reference signal passes through divider and phase-detector functions before controlling an external VCO through the external loop filter. The RFOUT+ and RFOUT− pins connect to the collectors of an NPN differential pair driven by the RF divider block. Programming the differential-pair tail current changes available output power, giving the system designer four current settings rather than one fixed output condition. Typical applications include cellular and wireless infrastructure, microwave radio equipment, instrumentation and test systems, radar-related signal sources, industrial RF control, and frequency conversion modules. The component is particularly appropriate when the designer wants a flexible integer-N or fractional-N architecture with an external VCO instead of an integrated fixed-frequency oscillator. Design the loop filter for the required phase margin and loop bandwidth rather than treating it as a generic RC network. Keep the reference, feedback, VCO, and RF traces short and controlled, and provide a low-impedance ground path around the exposed pad. Confirm the programmed divider, modulus, charge-pump current, reference frequency, and output power settings together because each affects lock behavior and phase noise. This product page combines the ADF4155BCPZ device specifications, package information, application guidance, and the electrically identical but differently packaged ADF4155BCPZ-RL7 option. It also identifies the engineering limits of substitution, helping designers distinguish a true same-footprint replacement from a merely similar PLL.

RFQ İletişim

ADF4156BCPZ

ADF4156BCPZ - 6.2GHz Fractional-N PLL | Analog Devices

The Analog Devices ADF4156BCPZ is a 6.2 GHz fractional-N frequency synthesizer with a 3-wire serial interface, programmable RF output phase, and cycle-slip reduction circuitry, housed in a 20-lead LFCSP package with an exposed pad. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable divider, and RF output stage to generate local-oscillator signals for wireless receivers and transmitters. A fractional-N frequency synthesizer is a clock-generation IC that synthesizes precise RF frequencies by dividing a stable reference below the requested output frequency and then multiplying that frequency through a phase-locked loop. The fractional-N architecture allows non-integer division ratios, providing fine frequency resolution without requiring an exceptionally high reference frequency. This makes the device suitable for communication systems that need accurate local-oscillator generation from a common reference source. Key features include operation up to 6.2 GHz, a minimum specified RF input frequency of 0.5 GHz, programmable output phase, and cycle-slip reduction for faster lock times without loop-filter changes. The manufacturer documents a maximum serial clock rate of 20 MHz and a 29-bit register transfer format. These characteristics support direct register programming while preserving control over frequency division, charge-pump current, reference settings, and output phase. The internal phase-frequency detector compares the divided feedback signal with the reference signal, while the charge pump drives an external loop filter. The resulting control voltage adjusts the internal voltage-controlled oscillator until the synthesized output reaches the programmed frequency. A stable reference and correctly sized passive loop-filter network are therefore fundamental to accurate locking, low phase noise, and deterministic acquisition behavior. Typical applications include wireless receiver and transmitter local oscillators, upconversion and downconversion chains, phase-controlled RF signal generation, and test equipment requiring programmable fractional frequency synthesis. The device is particularly useful where multiple RF functions must share a reference while retaining independent frequency and phase settings. PCB design should preserve short, controlled-impedance RF routing and keep the RF input path isolated from noisy digital and switching circuitry. The exposed thermal pad requires proper thermal and electrical layout according to the manufacturer guidelines. Adequate supply decoupling and a carefully designed loop filter are essential for stable lock performance and acceptable phase noise. This page combines the ADF4156BCPZ functional description, pin-compatible family references, application guidance, parameter comparisons, and practical layout considerations to support faster engineering evaluation. It also highlights the limits that must be checked before replacing a different synthesizer or reusing an existing RF board layout.

RFQ İletişim

ADF4156BRUZ

ADF4156BRUZ - 6.2 GHz Fractional-N PLL Synthesizer | Analog Devices

The Analog Devices ADF4156BRUZ is a 6.2 GHz fractional-N frequency synthesizer (PLL) with a minimum RF input frequency of 500 MHz, housed in a 16-lead TSSOP package measuring 0.173" wide by 4.40 mm and programmed over a 3-wire serial interface. It is built to implement local oscillators in the upconversion and downconversion sections of wireless receivers and transmitters. A fractional-N frequency synthesizer is a phase-locked loop that uses a programmable reference divider, a phase frequency detector, a charge pump, and a Sigma-Delta fractional interpolator to synthesize an output frequency that is not an integer multiple of the reference clock. This allows very fine frequency steps without a very high reference frequency, which reduces the reference oscillator's cost, size, and phase noise contribution. In the broader hierarchy it sits as a clock-and-timing IC, a subcategory of integrated circuits used for frequency generation, modulation, and clock distribution. Key features of the ADF4156 include the 6.2 GHz maximum RF input rate, a programmable reference divider, a precision charge pump, and low-noise digital phase frequency detector. The RF output phase is programmable, so a designer can set a specific phase relationship between the output and the reference, which is useful in phased-array and cancellation architectures. Cycle slip reduction circuitry is also built in, delivering faster lock times without requiring modifications to the external loop filter. Technically, the Sigma-Delta fractional interpolator divides the N counter into integer and fractional portions and uses a Sigma-Delta modulator to dither the fractional word, pushing quantization noise to high frequencies where it can be shaped out by the loop filter. Combined with the cycle slip reduction circuit, this gives fast lock with modest loop bandwidth and low in-band phase noise, while the programmable reference divider allows the device to accept a range of reference clock frequencies. Typical uses include wireless transceiver local oscillators, microwave upconverter and downconverter signal chains, cellular and Wi-Fi base station RF front ends, and low-cost laboratory or instrumentation signal sources where a stable, tunable LO is needed above 500 MHz. One key design consideration is the RF input slew rate: although the RF input specification is 0.5 GHz minimum, lower frequencies can be used if the minimum slew rate of 400 V/us is met, and a squaring LVDS driver such as the FIN1001 may be used to square up a slow-slew input. Loop filter component selection and reference jitter budgeting remain the two dominant noise contributors in the design. This page consolidates device specifications, drop-in family alternatives, parameter-by-parameter comparison rows, and practical RF design notes that are not gathered together on a single manufacturer or distributor listing.

RFQ İletişim

ADF4157BCPZ

ADF4157BCPZ - 6 GHz Fractional-N PLL | Analog Devices

The Analog Devices ADF4157BCPZ is a high-resolution 6 GHz fractional-N frequency synthesizer packaged in a 20-lead WFQFN exposed-pad package. It combines a 25-bit fixed fractional-N modulus, low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and Sigma-Delta fractional interpolator. Its specified RF operating range begins at 500 MHz and extends to 6 GHz, supporting subhertz frequency resolution at 6 GHz through programmable integer and fractional division. A fractional-N frequency synthesizer is a phase-locked-loop-based clock and frequency generator that synthesizes an output frequency from a stable reference. In the signal-chain hierarchy, the ADF4157 belongs to clock generation, PLL synthesis, and broader frequency-generation IC families. It is particularly useful when a system requires fine frequency resolution, programmable feedback ratios, and digital control over an RF output without replacing the synthesizer during configuration changes. Key characteristics include a 6 GHz maximum synthesis frequency, 25-bit fractional-N modulus, programmable reference division, and Sigma-Delta fractional interpolation. The low-noise PFD and precision charge pump support the synthesizer’s frequency-generation role, while the fractional interpolator permits programming values between integer feedback ratios. These functions make the device applicable to communication equipment, test instruments, RF signal chains, and frequency-generation subsystems. Technically, the ADF4157 uses a fractional-N architecture to achieve fine frequency resolution while allowing a relatively high prescaler value. The INT and FRAC registers define the integer and fractional feedback ratios, and the reference divider can be programmed to accommodate multiple reference frequencies. Its low-noise architecture also makes input signal quality, reference stability, loop-filter design, and power-supply implementation important parts of achieving predictable phase noise and spur performance. Typical uses include local-oscillator generation for RF communications, tunable clock generation for test and measurement equipment, microwave down-conversion systems, frequency-agile signal sources, and instrumentation requiring fine tuning resolution. The 500 MHz to 6 GHz RF range supports microwave systems while the fractional-N capability allows the output to be positioned at closely spaced frequencies around a chosen reference-derived channel. Designers should place the reference and RF input connections for controlled impedance and isolate sensitive routing from noisy digital and charge-pump paths. The loop filter, reference decoupling, supply bypassing, and exposed-pad thermal design require careful implementation. Verify lock behavior across temperature, supply tolerance, reference accuracy, and the complete intended tuning range before releasing a production board. This product page combines the manufacturer specifications, verified distributor listings, application-oriented design guidance, and a package-focused engineering comparison. It also distinguishes the exact ADF4157BCPZ orderable variant from packaging, package-format, and functionally different parts that are not true pin-to-pin drop-in replacements.

RFQ İletişim

ADF4157BRUZ

ADF4157BRUZ - 6 GHz Fractional-N Frequency Synthesizer | Analog Devices

The Analog Devices ADF4157BRUZ is a 6 GHz fractional-N frequency synthesizer with a 25-bit fixed modulus, delivering sub-hertz frequency resolution at 6 GHz while operating from a single 3.3 V supply in a 16-lead TSSOP package. It integrates a low-noise digital phase frequency detector, a precision charge pump, a programmable reference divider, and a Sigma-Delta based fractional interpolator for programmable fractional-N division. A fractional-N frequency synthesizer, also called a PLL frequency synthesizer, is a phase-locked loop that multiplies a low-frequency reference source to a high-frequency output while allowing fractional division ratios through digital interpolation. The result is a programmable local oscillator with the resolution of a fractional divider but the phase noise and spur performance of a multi-modulus integer-N architecture. Within the clock and timing hierarchy, this part sits between a crystal oscillator and a full RF transceiver front end. Key features of the ADF4157BRUZ include an RF input bandwidth reaching 6 GHz, a 25-bit fixed fractional modulus, a programmable charge pump current, and a separate VP pin that allows an extended tuning voltage for a higher tuning range on the VCO. The device supports 3.3 V operation with a documented supply current of 29 mA, and it includes a 3-wire serial interface for programming the INT and FRAC divider values, reference divider ratio, charge pump current, and power-down state. Architecturally, the ADF4157 uses a digital phase frequency detector to compare the divided feedback signal with the reference, with the resulting error driving the charge pump and external loop filter. The Sigma-Delta fractional interpolator distributes the fractional division error over many PFD cycles, which spreads the fractional spurs away from the carrier and improves the close-in phase noise floor. This makes the device suitable for demanding frequency plans where a single high-performance RF PLL would otherwise be required. Typical applications include cellular and mmWave transceiver local oscillators, microwave and radar frequency generation, test and measurement instrumentation, wireless infrastructure base station synthesis, and satellite communication modems. The TSSOP-16 body, 4.40 mm wide with 0.173 inch lead span, fits standard surface-mount assembly flows. When designing around this synthesizer, plan the loop filter for the target reference and VCO, keep the VTUNE node short and shielded from digital return currents, and decouple the VP pin separately from VCC. Confirm that the VCO can be pulled across the full tuning range and that the charge pump current setting matches the loop bandwidth target. This page consolidates the manufacturer part details, verified distributor inventory channels, pin-compatible drop-in alternatives, and practical loop-filter and layout guidance that engineers typically have to assemble from several separate sources.

RFQ İletişim

ADF4159CCPZ

ADF4159CCPZ - 13 GHz Fractional-N PLL Synthesizer | Analog Devices

The Analog Devices ADF4159CCPZ is a 13 GHz fractional-N frequency synthesizer with modulation, fast and slow waveform generation, one CMOS output, and a 24-lead WFQFN exposed-pad package. It uses a 25-bit fixed modulus for subhertz frequency resolution, while its low-noise digital phase-frequency detector operates up to 110 MHz according to the manufacturer datasheet. The device accepts CMOS reference input and is intended for programmable clock, modulation, and waveform-generation systems. A frequency synthesizer is a clock-and-timing semiconductor that locks an output frequency to a stable reference. In the PLL hierarchy, the ADF4159 belongs to the fractional-N synthesizer and phase-locked-loop categories, combining a programmable reference divider, phase detector, charge pump, Sigma-Delta fractional interpolator, feedback dividers, and output drive circuitry. This allows a single device to generate a precisely controlled RF or clock output while retaining fine frequency adjustment. Key verified features include operation to 13 GHz, a 25-bit fixed modulus, direct modulation, fast-ramp waveform generation, and both fast and slow waveform generation. The listed supply conditions include AVDD and VP from 2.7 V to 3.45 V and DVDD and SDVDD at 1.8 V. These features make the synthesizer useful where an adjustable RF clock, modulation source, or test waveform is needed rather than a fixed-frequency oscillator. Technically, the PLL compares the divided feedback signal with the divided reference signal. Its digital PFD and charge pump drive the tuning path, while the Sigma-Delta fractional interpolator permits fine fractional frequency control. The verified data also identifies a 110 MHz PFD frequency. Values such as phase noise, lock time, reference input frequency range, output power, and temperature limits were not supplied and must be verified in the complete manufacturer datasheet before design release. Typical uses include RF and microwave signal generation, communications test equipment, clock modulation, laboratory waveform sources, and closed-loop systems requiring programmable frequency. In these applications, the 13 GHz ceiling provides broad tuning coverage, the fractional-N architecture provides fine resolution, and the waveform functions reduce the need for separate modulation circuitry. A key design consideration is loop-filter and reference implementation. The external loop filter, charge-pump settings, reference divider, feedback dividers, and output matching network must be designed together because they determine loop dynamics and spectral performance. RF routing also requires controlled impedance and careful separation of sensitive feedback and reference paths. This page combines verified manufacturer and distributor facts, a conservative drop-in assessment, package guidance, and engineering-focused comparison and design notes. It distinguishes documented values from missing data so engineers can review the part without relying on unverified specifications.

RFQ İletişim

ADF4169CCPZ

ADF4169CCPZ - 13.5 GHz Fractional-N Synthesizer | Analog Devices

The Analog Devices ADF4169CCPZ is a 13.5 GHz fractional-N frequency synthesizer with modulation and fast and slow waveform generation capability in a 24-lead LFCSP-WQ surface-mount package. It uses a 25-bit fixed modulus to provide subhertz frequency resolution, while its low-noise digital phase-frequency detector, precision charge pump, and programmable reference divider support precision phase-locked-loop designs. A fractional-N frequency synthesizer is a clock-generation and timing IC that synthesizes an output frequency through a phase-locked loop. Its hierarchy extends from frequency synthesizer to phase-locked loop, clock and timing IC, and power-management-adjacent semiconductor. Unlike a simple integer-N divider, the ADF4169 supports fractional feedback division, allowing precise output-frequency settings without requiring an excessively high reference frequency. The ADF4169CCPZ supports a maximum synthesis frequency of 13.5 GHz and includes both fast and slow waveform generation for modulation. Its 25-bit fixed-modulus fractional architecture provides subhertz frequency resolution. The device also combines a low-noise digital phase-frequency detector and precision charge pump, features intended to support low phase noise and accurate loop operation in demanding RF signal chains. The device is suitable for frequency synthesis in RF communications, radar-related RF signal generation, test and measurement equipment, and other systems requiring programmable microwave or millimeter-wave-adjacent frequencies. Its fractional-N architecture is especially relevant when a system needs fine frequency granularity, rapid tuning, or controlled modulation rather than a fixed integer-divider output. A key design consideration is that fractional operation introduces fractional spurs. Designers should select the reference, loop filter, charge-pump settings, and output frequency carefully so that modulation requirements and spur performance can be met simultaneously. The external loop-filter component values and board layout should follow the manufacturer’s guidance rather than being selected from generic PLL assumptions. This page consolidates the verified 13.5 GHz frequency capability, 25-bit fractional architecture, package information, pricing reference, and application guidance for ADF4169CCPZ. It also distinguishes search-result comparison candidates from true drop-in alternatives because the supplied cross-reference data does not verify their package dimensions, pin assignments, or electrical compatibility.

RFQ İletişim

ADF4193BCPZ

ADF4193BCPZ - 3.5 GHz Fast-Settling PLL Synthesizer | Analog Devices

The Analog Devices ADF4193BCPZ is a low-phase-noise, fast-settling RF PLL frequency synthesizer with a 300 MHz to 3.5 GHz input range, an output range up to 470 MHz, and a 32-lead WFQFN exposed-pad package. The device is designed for precision local-oscillator generation in wireless receiver and transmitter upconversion and downconversion paths. A phase-locked loop, or PLL, is a frequency-control IC that compares a divided reference signal with a feedback signal and drives a phase-adjustable voltage-controlled oscillator until the two match. Within clock and timing ICs, a PLL frequency synthesizer belongs to the broader phase-locked-loop, clock-generation, and signal-chain control hierarchy. It is commonly used where a stable, programmable, or coherent local oscillator is required. The Analog Devices ADF4193 datasheet describes a low-noise digital phase-frequency detector and a precision differential charge pump. Its dual-band loop architecture uses narrow-loop operation for low phase noise and wide-loop operation for rapid acquisition. A programmable 4-wire serial interface provides register control, while an external loop filter and reference clock determine many practical lock-time and phase-noise results. The differential charge-pump and selectable loop-bandwidth architecture are central engineering features. According to the Analog Devices ADF4193 datasheet, Rev. G, the narrow loop bandwidth supports low phase noise and spur performance, while the wide bandwidth permits faster settling before normal narrow-band operation resumes. The topology is intended to preserve low-noise operation after the acquisition phase. Typical uses include GSM and EDGE base-station local oscillators, wireless receiver and transmitter conversion chains, instrumentation requiring a programmable RF reference, and test equipment needing a phase-coherent output. The low-noise PFD and differential charge pump make the part suitable for systems where close carrier spacing, reference-spur control, or rapid frequency changes affect receiver sensitivity and transmitter fidelity. PCB implementation requires careful treatment of the exposed pad, supply connections, reference input, RF output, and loop-filter network. Keep the loop-filter components close to their associated pins, provide low-inductance ground and power return paths, and follow the manufacturer land-pattern and thermal-layout guidance. Reference spur performance can also depend on isolation between the VCO and the reference path. This page combines the manufacturer specifications, exact-MPN sourcing records, same-package comparison context, and practical PLL layout guidance. It highlights where a designer must evaluate loop-filter design, reference isolation, settling behavior, and thermal implementation rather than relying only on headline frequency and package figures.

RFQ İletişim

ADF4196BCPZ

ADF4196BCPZ - 6 GHz Fast-Settling PLL | Analog Devices

Analog Devices ADF4196BCPZ is a low-phase-noise, fast-settling 6 GHz fractional-N PLL frequency synthesizer in a 32-lead WFQFN exposed-pad package. Its input frequency range extends from 400 MHz to 6 GHz, while its output frequency can reach 750 MHz. The device is intended for precision clock and local-oscillator generation where rapid acquisition, fractional-N frequency synthesis, and low phase noise are important. A phase-locked loop is a feedback-controlled frequency synthesizer. A PLL compares a divided reference signal with a feedback signal derived from its output, then adjusts a voltage-controlled oscillator until the two signals reach the required phase and frequency relationship. Fractional-N synthesis extends this architecture by dividing the feedback counter by a fractional value, allowing accurate synthesis without requiring a prohibitively high reference frequency or an extremely high prescaler ratio. The ADF4196 combines a fractional-N architecture with a stated maximum input frequency of 6 GHz. Its low-phase-noise design is valuable for receiver and transmitter local oscillators, where multiplier noise can degrade the useful signal-to-noise ratio. The fast-settling behavior is particularly relevant to frequency-stepping systems, including pulse Doppler radar and communication infrastructure operating under GSM/EDGE lock-time requirements. The ADF4196BCPZ uses a 32-lead exposed-pad package, providing 32 electrical connections plus a thermal and electrical land associated with the exposed pad. The package is supplied in tray format according to the product listing. Component selection should account for the complete PLL configuration: reference frequency, prescaler division, feedback division, integer and fractional settings, loop-filter values, output frequency range, and required lock time. Typical uses include wireless receiver and transmitter local oscillators, pulse Doppler radar frequency sources, base-station equipment, instrumentation, and test-and-measurement systems. In a local-oscillator implementation, the synthesizer generates a stable tone that is mixed with the received or transmitted signal to move it into or out of the desired frequency band. PCB implementation requires short, controlled- impedance connections, a carefully designed ground plane, clean separation between sensitive RF and digital control paths, and low-inductance placement of decoupling capacitors. The exposed pad should be connected to the appropriate ground or supply plane according to the device pinout and reference layout, and thermal performance should be checked under the highest expected operating frequency and output power. This product record combines the manufacturer identification, frequency range, package information, and application role of the ADF4196BCPZ with engineering guidance for PLL integration. Because no qualified same-package substitute was identified, the safest replacement decision is to evaluate the original ADF4196 family directly rather than assume that a similarly specified PLL is pin-to-pin compatible.

RFQ İletişim

ADF4208BRU

ADF4208BRU - Dual 2 GHz Integer-N PLL | Analog Devices

The Analog Devices ADF4208BRU is a dual RF phase-locked loop frequency synthesizer with a 2 GHz maximum input frequency, integer-N operation, and a 20-pin TSSOP package. Each synthesizer integrates a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a selectable dual-modulus prescaler. The verified ADF4206/ADF4208 datasheet identifies the part specifically as a dual RF PLL frequency synthesizer intended for wireless receiver and transmitter local oscillators. A frequency synthesizer is a clock-generation and timing-control semiconductor that locks an output oscillator to a stable reference frequency. The ADF4208 belongs to the PLL, frequency synthesizer, clock generator, and phase-locked loop product hierarchy. Its two independent synthesizer channels can support separate local-oscillator paths in wireless upconversion and downconversion circuits, reducing the number of discrete frequency-generation blocks required on a radio board. The verified feature summary lists operation from 5 MHz to 2 GHz, a 5.5 V power supply, selectable charge-pump supply for extended tuning-voltage operation, selectable charge-pump currents for 3 V systems, and an on-chip oscillator circuit. The selectable dual-modulus prescaler and programmable A, B, and reference counters provide the integer-N frequency-planning controls needed to derive stable local-oscillator outputs from a common reference. Each PLL channel combines digital phase-frequency detection with a precision charge pump and programmable dividers. The charge pump controls the tuning interface to an external voltage-controlled oscillator, while the prescaler and integer counters define the multiplication ratio. The on-chip oscillator offers an additional reference-source option where the board architecture cannot provide a suitable external reference. The integrated architecture is intended to simplify RF local-oscillator design while retaining programmable division and charge-pump settings. Typical uses include wireless receiver and transmitter local oscillators, upconverter and downconverter synthesis, RF transceiver frequency generation, and other communications equipment requiring deterministic phase locking. The dual-channel arrangement is particularly useful where a radio requires two related or independent synthesized frequencies. Because the exact tuning range, phase-noise values, lock-time limits, and operating-temperature limits are not included in the supplied verified excerpts, engineers should consult the complete manufacturer datasheet before finalizing bandwidth, spur, and temperature-margin calculations. When laying out the ADF4208BRU, place the reference and RF input paths away from charge-pump and digital-control return currents. Use a clean, low-impedance ground reference and follow the manufacturer's recommended decoupling arrangement. The external VCO loop filter remains a critical RF design element because it determines phase noise, reference spurs, lock behavior, and tuning-range stability. Validate the complete loop rather than treating the PLL IC as an isolated clock block. This page consolidates the verified manufacturer and distributor information, separates known parameters from missing engineering data, and adds practical guidance for RF layout, PLL loop design, and device selection. It also documents the absence of verified drop-in replacements instead of presenting unverified or packaging-only MPN variants as drop-in alternatives.

RFQ İletişim

ADF4208BRUZ

ADF4208BRUZ - 2 GHz Dual PLL Synthesizer | Analog Devices

The Analog Devices ADF4208BRUZ is a dual frequency synthesizer that combines two phase-locked loops, or PLLs, with a maximum synthesizer frequency of 2 GHz in a 20-lead TSSOP package. It is designed for wireless receiver and transmitter local-oscillator paths, where independent frequency synthesis is useful for upconversion and downconversion stages. The device uses CMOS-compatible signal connections, a selectable charge-pump supply, and selectable charge-pump currents. It operates from a 5.5 V power supply according to the manufacturer product description, while the charge-pump supply can be selected to support extended tuning-voltage operation and 3 V systems. A PLL frequency synthesizer is a timing IC that compares a reference signal with a divided feedback signal, drives a phase-frequency detector and charge pump, and locks a voltage-controlled oscillator to the target frequency. In the broader semiconductor hierarchy, a PLL belongs to the clock-and-timing IC family and ultimately to frequency-generation and phase-locking electronics. The ADF420x family targets radio-frequency signal chains in which a stable local oscillator is required for frequency conversion and channel selection. The ADF4208BRUZ provides a maximum output frequency of 2 GHz and incorporates two frequency-synthesizer circuits. Its low-noise digital phase-frequency detector supports the core locking function, while the charge-pump architecture controls the tuning interface to an external voltage-controlled oscillator. Selectable charge-pump current provides a means to balance loop bandwidth, phase-noise behavior, and reference-divider settings. The 3 V charge-pump option is particularly relevant to systems whose external VCO tuning range is limited. The 20-lead TSSOP package provides a compact surface-mount implementation for communications equipment. The manufacturer describes the ADF420x family as being used in the local-oscillator sections of wireless receivers and transmitters, where the dual architecture can support separate conversion paths or related synthesis functions. Its 2 GHz ceiling makes it applicable to RF systems operating below that frequency, including many cellular, microwave, and instrumentation signal chains. Typical applications include wireless receiver local oscillators, wireless transmitter upconversion chains, microwave downconversion stages, and low-phase-noise RF test equipment. The dual-synthesizer structure can also be useful in dual-band receivers, closed-loop reference systems, and communication modules that need two coordinated frequency sources. Care is required when choosing the reference, loop-filter components, RF output interface, and external VCO. For PCB implementation, use the manufacturer pin-description and test-point guidance when assigning the 20 TSSOP connections. Keep RF output and reference traces short, use a controlled ground return, and place loop-filter components close to their associated charge-pump and supply pins. The external VCO and feedback divider must support the intended output range, and the loop bandwidth should be calculated for the reference frequency and required phase-noise performance. This product page combines the manufacturer family description, distributor package information, strict same-package replacement analysis, application guidance, and design notes. It also distinguishes documented electrical facts from parameters that require confirmation against the complete ADF4208 datasheet, helping engineers plan RF layouts and drop-in evaluations efficiently.

RFQ İletişim

ADF4210BCP

ADF4210BCP - 1.2 GHz Dual RF/IF PLL | Analog Devices

Analog Devices ADF4210BCP is a dual RF/IF phase-locked-loop frequency synthesizer supporting input frequencies from 0 MHz to 1.2 GHz in a 20-lead LFCSP surface-mount package. It operates from a 2.7 V to 5.5 V power supply, includes a separate charge-pump supply that permits an extended tuning voltage in 3 V systems, and uses a three-wire serial interface for programming and control. A PLL, or phase-locked loop, is a frequency-control circuit that locks an output oscillator to a stable reference frequency. A frequency synthesizer expands that reference into programmable RF or IF frequencies for communication, instrumentation, broadcast, and test systems. Within the broader semiconductor hierarchy, the ADF4210BCP is a clock-and-timing IC, a frequency synthesizer, and ultimately a phase-locked-loop integrated circuit. Key features include a programmable dual-modulus prescaler with selectable RF and IF prescaler values of 8/9, 16/17, 32/33, or 64/65. Programmable RF and IF charge-pump currents support tuning-range adjustment. The device also provides analog and digital lock detection, a Fastlock mode for faster acquisition, and a power-down mode. These functions allow the synthesizer to be adapted to different reference frequencies, loop filters, and lock requirements. The ADF4210BCP combines an integer-N PLL architecture with programmable dual-modulus prescaling. Separate programming for the RF and IF paths allows one PLL to generate a range of output frequencies while supporting different prescaler ratios. The separate charge-pump supply, identified as VP, can extend the available tuning voltage beyond the principal supply level, which is useful when designing a low-voltage system around the device's 2.7 V minimum operating supply. Typical uses include RF and IF signal-chain synthesis in wireless receivers, transmitters, test equipment, and communications infrastructure. The 1.2 GHz maximum input frequency makes the device suitable for intermediate-frequency and radio-frequency synthesis stages where a programmable local oscillator or clock is required. Its three-wire serial interface simplifies connection to a host microcontroller, while digital lock detect provides a status signal for system sequencing. When designing a new board around the ADF4210BCP, verify the reference-divider ratio, prescaler selection, charge-pump current, loop-filter components, and required VCO tuning range before finalizing the schematic. The PLL reference and feedback paths are sensitive to noise, so use short, controlled-routing traces, adequate ground-plane connectivity, and appropriately placed loop-filter components according to the manufacturer datasheet. This product page consolidates the verified ADF4210 family information, distributor availability references, package details, and engineering design guidance into one searchable source. It also distinguishes confirmed device parameters from unavailable pricing and replacement data, helping engineers evaluate the ADF4210BCP without treating unverified values as manufacturer specifications.

RFQ İletişim

ADF4210BRU

ADF4210BRU - 1.2 GHz Dual RF/IF PLL | Analog Devices

Analog Devices ADF4210BRU is a dual RF/IF integer-N PLL frequency synthesizer with RF operation up to 550 MHz and IF operation up to 1.2 GHz, housed in a 20-lead TSSOP package. It operates from a 2.7 V to 5.5 V power supply and uses a separate charge-pump supply to support extended tuning-voltage operation in 3 V systems. The device provides programmable dual-modulus RF and IF prescalers, programmable charge-pump current, a 3-wire serial interface, analog and digital lock detection, Fastlock operation, and power-down capability. A phase-locked loop, or PLL, is a feedback-controlled frequency-generation circuit whose phase-locked output is referenced to an input oscillator. The ADF4210BRU belongs to the broader frequency synthesizer hierarchy, where a phase detector compares a divided feedback signal with a reference signal and the charge pump converts phase error into a tuning voltage for a voltage-controlled oscillator. This architecture allows a single synthesizer to support programmable frequency generation in RF and intermediate-frequency signal chains. The principal features are tightly aligned with demanding communications and frequency-generation designs. The 8/9, 16/17, 32/33, and 64/65 dual-modulus prescaler choices provide tradeoffs between division ratio and prescaler operating range. Programmable charge-pump current supports tuning-loop optimization, while the separate VP supply gives designers additional control over the tuning-voltage range. Analog and digital lock indicators provide both analog status information and a digital signal suitable for supervisory control. Fastlock operation allows the frequency synthesizer to change between programmed settings with reduced acquisition time compared with the normal lock sequence. The 3-wire serial interface supports programming through DATA, CLOCK, and LE functions, while power-down mode can reduce consumption when the synthesizer is not required. The industrial temperature grade and surface-mount TSSOP-20 package target compact, automated electronic assemblies, although the exact operating-temperature limits and package dimensions require confirmation in the manufacturer datasheet. Typical uses include local-oscillator generation for receivers, IF and RF frequency synthesis in communications equipment, frequency conversion in instrumentation, phase-related signal generation in industrial systems, and programmable local-oscillator architectures in test equipment. In each case, the combination of dual RF/IF synthesis, selectable prescalers, programmable charge-pump current, and lock-status reporting supports compact frequency-plan implementation. The main design consideration is the interaction among reference frequency, prescaler, charge-pump settings, loop filter components, and required lock time. Designers should use the manufacturer’s frequency-planning guidance and verify settling behavior in the final loop-filter implementation rather than assuming lock performance from the input frequency alone. The separate VP connection and external loop filter also require careful PCB layout to minimize noise and unwanted coupling. This product page combines the verified ADF4210 product-page capabilities with explicit data-availability limits, avoiding invented pricing, pin assignments, or lifecycle claims. It also distinguishes verified device functions from engineering assumptions that still require validation against the complete ADF4210 datasheet and the target reference oscillator, VCO, and loop-filter implementation.

RFQ İletişim

ADF4211BCP

ADF4211BCP - Dual RF/IF Integer-N PLL | Analog Devices

The Analog Devices ADF4211BCP is a dual RF/IF integer-N PLL frequency synthesizer supporting inputs up to 2 GHz and operating from a 5.5 V supply in a 20-pin LFCSP package. The device provides separate RF and IF synthesis paths, programmable dual-modulus prescalers, programmable charge-pump currents, and a separate charge-pump supply for extended tuning-voltage operation. These features make it suitable for local oscillators, clock generation, modulation and demodulation systems, and dual-band RF signal chains. A PLL frequency synthesizer is a timing and frequency-control IC that locks a voltage-controlled oscillator to a stable reference frequency. Within the broader hierarchy, a PLL belongs to the clock and timing IC family, which supports frequency generation, phase management, distribution, and modulation. The ADF4211BCP combines a programmable integer-N divider, frequency comparison, charge-pump output, reference-frequency division, and RF/IF prescaling in one integrated circuit. Verified device features include RF and IF prescaler paths, programmable dual-modulus operation, programmable charge-pump currents, a 5.5 V power supply, and a separate VP charge-pump supply. The separate VP rail allows the tuning voltage to extend beyond the nominal operating range when higher-range VCO tuning is required. Programmable prescaler and charge-pump settings give the system designer control over divider ratios, phase-detector behavior, and loop-current selection. The ADF4211BCP belongs to the ADF4211 dual PLL family and is identified in available listings as a clock generator, PLL, or frequency synthesizer. The provided manufacturer-related search data confirms an input range from 0 MHz to 2 GHz and describes the device as a dual RF/IF PLL. Family documentation also identifies 0.5 GHz, 1.2 GHz, 2.0 GHz, 2.7 GHz, and 3.0 GHz operating-band combinations associated with the product family, although the exact enabled path and divider configuration must be confirmed in the manufacturer datasheet. Typical uses include RF transceiver local oscillators, IF signal generation, communication receivers and transmitters, test equipment, and dual-channel clock synthesis. The dual architecture allows two related synthesis paths to share a reference while supporting different output frequencies. Designers should select the appropriate prescaler, divider, charge-pump current, loop filter, reference divider, and VCO tuning range for the target output plan. The principal design consideration is loop stability. Component values must be derived from the selected prescaler, PFD frequency, charge-pump current, VCO gain, and required phase-noise performance. PCB return paths, ground-plane continuity, supply bypassing, and isolation between noisy digital control lines and sensitive RF outputs are also critical in high-frequency implementations. This product record combines the verified ADF4211BCP specifications, package information, sourcing links, candidate family comparisons, and practical PLL design guidance. It is intended to help engineers evaluate clock-generation and RF/IF synthesis requirements before completing reference-design and loop-filter validation.

RFQ İletişim

ADF4212BRU

ADF4212BRU - Dual Integer-N 0.5/1.2GHz PLL | Analog Devices

The Analog Devices ADF4212BRU is a dual integer-N RF/IF phase-locked-loop frequency synthesizer with channel rates of 0.5 GHz/1.2 GHz, operating from a 2.7 V to 5.5 V supply and housed in a 20-pin TSSOP package. The device supports 3 V systems, provides programmable dual-modulus prescalers for RF and IF inputs, and offers programmable charge-pump currents for loop filtering and phase-noise optimization. A frequency synthesizer is a timing and control component that locks an output frequency to a stable reference by comparing a divided feedback signal with a reference oscillator. The phase-locked-loop, or PLL, hierarchy includes frequency synthesizer -> clock generator -> clock and timing IC -> integrated circuit. The ADF4212BRU occupies the RF/IF end of that hierarchy, where integer-N feedback division and phase comparison generate a controllable tuning voltage for an external voltage-controlled oscillator or frequency synthesizer core. The dual-channel architecture allows two independent RF or IF synthesis paths within one device. Separate charge-pump supply support permits extended tuning voltage where the system requires greater tuning range. According to the manufacturer product page and indexed datasheet material, the ADF4212 family supports programmable charge-pump currents and dual-modulus prescaling. These controls work with external loop-filter components, reference dividers, and feedback dividers to determine lock behavior, phase noise, and channel spacing. The ADF4212BRU is intended for RF and IF signal chains that require multiple related frequencies from a common reference. Typical uses include communications equipment, frequency conversion blocks, RF test and measurement systems, and instrumentation requiring precise phase alignment. The integer-N architecture favors channels that can be represented by integer division ratios relative to the reference frequency. Designers should account for the 2.7 V to 5.5 V supply range, preserve adequate headroom for the core, charge-pump, and external oscillator interfaces, and design the loop filter around the selected prescaler, charge-pump current, reference frequency, and required phase-noise performance. Printed-board layout must minimize reference and feedback-node noise coupling because both directly influence synthesized signal purity. This page consolidates verified manufacturer and distributor information, practical implementation guidance, procurement details, and a transparent assessment of replacement options. It also distinguishes confirmed product attributes from parameters that require checking in the current manufacturer datasheet before a board-level design is released.

RFQ İletişim

ADF4212BRUZ

ADF4212BRUZ - 2.7GHz PLL Synthesizer | Analog Devices

Analog Devices ADF4212BRUZ is a dual phase-locked-loop clock and frequency synthesizer IC with a maximum RF/IF input frequency of 2.7 GHz, a programmable dual-modulus prescaler, and a 20-lead TSSOP package. It operates from a 2.7 V to 5.5 V power supply and uses a separate charge-pump supply to support extended tuning voltage in 3 V systems. A phase-locked loop, or PLL, is a frequency-control architecture that locks an output signal to a stable reference frequency. The ADF4212BRUZ combines phase-frequency detection, programmable dividers, charge-pump current sources, reference counters, and a three-wire serial programming interface. Together with an external voltage-controlled oscillator and loop filter, these functions form a complete programmable frequency synthesizer used to generate stable local oscillator signals. Key features include support for dual-modulus prescaler ratios of 8/9, 16/17, 32/33, and 64/65. The device provides programmable charge-pump currents, analog and digital lock detection, and Fastlock operation for improved acquisition behavior. Its reference architecture includes a 15-bit R counter, while the serial interface controls the on-chip registers. These features support adjustable synthesis ratios while retaining precise phase comparison against the reference input. The ADF4212 family is designed for RF and IF signal chains where multiple related frequencies must be derived from one reference source. The maximum RF/IF input frequency is 2.7 GHz, making the device suitable for communication equipment, test instruments, microwave subsystems, and frequency-conversion stages that operate below the upper RF/IF limit. The maximum prescaler input must also remain below the relevant CMOS counter limit during frequency planning. Typical uses include local oscillator generation for RF transceivers, IF synthesis in receivers, clocking for microwave conversion blocks, and programmable laboratory test equipment. In each case, the reference frequency, prescaler ratio, feedback divider, charge-pump current, and external loop filter jointly determine lock range, phase noise, spur performance, and settling behavior. Circuit design requires an external VCO and loop filter because the ADF4212BRUZ does not include a voltage-controlled oscillator. Component tolerances and parasitic effects in the charge-pump and feedback paths can affect tuning behavior, so component selection and PCB placement should follow the reference design and layout guidance in the manufacturer datasheet. The three-wire interface also requires correct logic levels and timing when driven by a host controller. This product page organizes the ADF4212BRUZ electrical limits, application guidance, package information, and drop-in comparison options into one engineering reference. It also highlights the distinctions between frequency-range variants and helps designers assess whether a same-family alternative preserves the required RF range, package, and pin configuration.

RFQ İletişim

ADF4213BCP

ADF4213BCP - 3 GHz Dual RF/IF PLL Synthesizer | Analog Devices

The Analog Devices ADF4213BCP is a dual RF/IF PLL frequency synthesizer with a 0 MHz to 3 GHz input range, programmable RF and IF outputs, and a 20-pin LFCSP package with an exposed pad. It operates from a 5.5 V power supply and includes a separate charge-pump supply to support extended tuning-voltage ranges. A PLL frequency synthesizer belongs to the clock and timing IC category. It generates a stable output frequency by phase-locking an output to a reference clock through a programmable frequency divider, a phase-frequency detector, a charge pump, a loop filter, and a voltage-controlled oscillator. Dual RF/IF architectures let one device support two related synthesis paths while providing programmable charge-pump currents and a programmable dual-modulus prescaler for RF and IF signal chains. The documented feature set includes 550 MHz/1.2 GHz, 550 MHz/2.0 GHz, 1.0 GHz/2.7 GHz, and 1.0 GHz/3 GHz frequency options. The separate VP charge-pump supply allows the tuning voltage to extend beyond the limits imposed by a single-supply implementation, which is useful when the VCO requires a wide tuning range. The device also supports 3 V systems and provides programmable RF and IF charge-pump currents. The ADF4213BCP is intended for RF and IF frequency generation in receivers, transmitters, upconverters, downconverters, and test equipment. Its dual-channel architecture is useful when a system must synthesize coherent RF and IF frequencies from a common reference, while the programmable prescaler supports different input-frequency divisions. The exposed pad permits thermal conduction through the PCB, although copper area, via placement, and thermal performance still require board-level validation. Designers should preserve loop-filter stability, reference-line cleanliness, and controlled impedance on RF and IF paths. Because the exact phase-noise figures, lock range, temperature limits, and pin-level register map were not supplied in the retrieved records, they should be confirmed against the current Analog Devices ADF4213 data sheet, Rev. A, before release. The separate charge-pump supply also requires careful sequencing and rail planning. This page consolidates the verified manufacturer, distributor, and cross-reference records into a structured product view. It adds application guidance, engineering considerations, comparison parameters, and sourcing context that are not presented together in a distributor catalog, while clearly identifying specifications that still require confirmation from the manufacturer documentation.

RFQ İletişim

ADF4213BRUZ

ADF4213BRUZ - 3 GHz PLL Clock Synthesizer | Analog Devices

The Analog Devices ADF4213BRUZ is a single-channel PLL clock/frequency synthesizer IC capable of generating output frequencies up to 3 GHz. The device accepts a CMOS reference input, provides a clock output, and is housed in a 20-pin TSSOP package measuring approximately 0.173 inch by 4.40 mm in width. Its 3 GHz operating capability, programmable charge-pump supply, and support for 3 V systems make it suitable for RF and IF clock-generation designs. A PLL clock synthesizer, or phase-locked-loop frequency synthesizer, is a timing and clock-generation IC that compares a reference signal with a divided feedback signal. The loop then adjusts a controlled output until the phase and frequency relationship is correct. Within the integrated-circuit hierarchy, a PLL synthesizer belongs to clock and timing ICs, frequency synthesizers, and RF/IF signal-chain devices used to produce stable clocks for receivers, transmitters, converters, and test equipment. The ADF4213BRUZ supports reference inputs identified as CMOS and supplies a clock output. Its maximum frequency is 3 GHz, while the listed input-to-output ratio is 3:1. The device also includes a separate charge-pump supply, VP, allowing the tuning voltage to extend beyond the range of a conventional single-supply arrangement. This feature can improve tuning range in designs requiring broader frequency coverage or greater separation between adjacent channels. Analog Devices describes operation from 2.7 V to 5.5 V, with listed support for 3 V systems and a 5.5 V power-supply capability. The separate VP connection provides additional control over the internal charge-pump voltage, while the programmable charge-pump current supports tuning behavior. Because the device is a fractional-N architecture, engineers can obtain precise frequency ratios without requiring every output point to correspond to a direct integer division of the reference frequency. Typical applications include RF and IF signal chains, local oscillators, wireless transmitters and receivers, communication infrastructure, and frequency-generation modules. It is also appropriate for instrumentation requiring a programmable clock close to the 3 GHz operating limit. The TSSOP-20 surface-mount package supports compact board layouts, although RF trace control and careful grounding remain necessary when the output is used in high-frequency systems. The principal design consideration is the relationship between reference frequency, prescaler settings, feedback division, and the desired output. A phase-locked loop requires a valid reference and correctly configured divider values; otherwise, the synthesizer may fail to lock or produce an incorrect channel. Layout should minimize loop-board distance, maintain continuous return paths, and use controlled impedance for the output route when the clock has a high harmonic content. This product page combines the manufacturer-part identity, technical specifications, package details, application guidance, verified drop-in references, and practical selection considerations. It also distinguishes confirmed ADF4213BRUZ characteristics from alternatives requiring separate electrical and pin-level qualification before design substitution.

RFQ İletişim

ADF4216BRU

ADF4216BRU - Dual Integer-N PLL Synthesizer 1.2 GHz | Analog Devices

The Analog Devices ADF4216BRU is a dual RF PLL frequency synthesizer delivering a 550 MHz to 1.2 GHz RF output with an integer-N phase-locked loop architecture, packaged in a 20-lead TSSOP. It combines a low-noise digital phase frequency detector (PFD), a precision charge pump, programmable reference and RF/IF dividers, and a 3-wire serial interface in a single RF/IF local oscillator (LO) solution. A PLL frequency synthesizer is a closed-loop timing device in which a voltage-controlled oscillator (VCO) output is phase- and frequency-locked to a stable reference source through a phase frequency detector and charge pump. It sits in the RF and IF signal chain of wireless transmitters and receivers, converting a single low-frequency reference into the high, spectrally pure local oscillator tones required for up-conversion and down-conversion. The hierarchy runs from phase-locked loop to frequency synthesizer to clock and timing IC to integrated circuit. The ADF4216 supports programmable reference, RF, and IF N-divider ratios, selectable charge pump currents, and selectable dual-modulus prescalers of 16/17 for the IF chain and 64/65 for the RF chain. Because the loop is integer-N, the synthesizer frequency is the reference frequency multiplied by an integer ratio, giving excellent phase noise and very low reference feedthrough at the cost of fractional-N flexibility. A dedicated power-down mode shuts the part down for leakage control between burst transmissions. Operated from a 3 V to 5.5 V supply, the device integrates everything a designer needs for a dual-LO transceiver front end: two independent synthesizer channels that can drive both the RF and IF sections of a wireless receiver or transmitter. The 3-wire serial interface allows the divider ratios, prescaler, charge pump, and counter settings to be loaded from a host microcontroller or baseband processor. Typical applications include GSM and CDMA wireless handsets, wireless local loop and base-station equipment, WCDMA and TD-SCDMA transceiver front ends, RFID readers, microwave and satellite up/down converters, and instrumentation. In each case the device replaces separate oscillators and dividers while tightening phase noise and reducing board area. When designing around the ADF4216, pay close attention to loop filter component selection, reference phase noise, and the charge pump setting. A mismatched charge pump current and bandwidth combination produces high reference spurs, while an aggressive loop bandwidth trades phase noise for lock time. Keep the reference and RF traces short and well decoupled, and follow the grounding and decoupling layout recommended in the manufacturer datasheet. This page combines verified distributor and manufacturer information with drop-in alternatives, a parameter-by-parameter comparison table, and practical design notes that go beyond the raw datasheet tables, helping engineers shortlist, source, and lay out the part with confidence.

RFQ İletişim

ADF4218BRU

ADF4218BRU - 2.5GHz Dual RF PLL Synthesizer | Analog Devices

The Analog Devices ADF4218BRU is a dual, integer-N RF PLL frequency synthesizer covering 550 MHz to 2.5 GHz, with a 2.7 V to 5.5 V supply and a 20-pin TSSOP package. It provides independent synthesizers for RF and IF local oscillators in wireless receiver and transmitter circuits, using a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable integer divider, and selectable dual-modulus prescaler. A phase-locked loop, or PLL, is a feedback-controlled timing circuit that locks an output oscillator to a stable reference frequency. The oscillator and voltage-controlled oscillator form the complete frequency synthesizer, while the ADF4218BRU handles reference division, phase detection, charge-pump current generation, programmable integer-N division, and prescaling. In the wider semiconductor hierarchy, it is a clock-and-timing IC and frequency synthesizer used for RF signal generation and frequency conversion. The device supports RF prescaler choices of 16/17 or 64/65 and selectable charge-pump currents. Its three-wire serial interface allows reference frequency, prescaler, integer-N counter, charge-pump, and band-select programming. Available dual-synthesizer configurations include 550 MHz/1.2 GHz, 550 MHz/2.0 GHz, and 550 MHz/2.5 GHz, depending on the selected variant and operating setup. Each synthesizer path uses a digital phase-frequency detector to compare a divided feedback signal with the divided reference. The resulting phase error drives the charge pump and external loop filter, which in turn control a VCO. Designers select loop bandwidth, reference division, charge-pump current, and filter components to balance phase noise, lock time, spur performance, and reference-multiplier requirements. Typical uses include wireless handset RF and IF local oscillators, GSM receivers and transmitters, wireless infrastructure, instrumentation, and other RF up-conversion or down-conversion systems. The 20-pin TSSOP package is also suitable for compact, surface-mounted frequency-generation boards where the external VCO and loop filter can be placed close to the RF signal path. When designing around the ADF4218BRU, preserve the datasheet-specified decoupling and keep the reference, loop-filter, and VCO connections compact. The integrated divider and detector simplify frequency planning, but phase noise, lock range, and spur performance still depend heavily on the external VCO, loop filter, reference quality, and board layout. This page combines verified manufacturer and distributor information with practical PLL design considerations, source-backed alternatives, and a parameter comparison. It highlights where the ADF4218BRU fits and where ADF4216BRU, ADF4217BRU, or the web-referenced ADF4212LBRUZ-RL may require further qualification before substitution.

RFQ İletişim

ADF4251BCP

ADF4251BCP - 3.0 GHz Fractional-N Synthesizer | Analog Devices

Analog Devices ADF4251BCP is a dual fractional-N/integer-N frequency synthesizer with 3.0 GHz fractional-N operation, 1.2 GHz integer-N operation, and a 3.3 V power supply in a 24-terminal surface-mount chip carrier package. It combines fractional-N or integer-N synthesis with programmable dual-modulus prescalers, a 3-wire serial interface, programmable charge-pump currents, digital lock detect, and power-down control. A frequency synthesizer is a timing IC that generates a controlled output frequency from a stable reference. A fractional-N synthesizer can achieve fractional division ratios while retaining the coarse tuning range associated with integer-N architecture. Within the broader hierarchy, the ADF4251BCP is a PLL frequency synthesizer, a clock-and-timing IC, and a semiconductor intended for RF local-oscillator generation and signal conversion. Key features include RF prescaler options of 4/5 and 8/9, a programmable IF prescaler, and a separate charge-pump supply that permits an extended tuning voltage. The 3-wire serial interface enables digital programming, while digital lock detect provides a hardware indication of synthesizer lock status. These controls are useful when the oscillator must be adjusted in real time or monitored by a host controller. The synthesizer is intended to operate with an external voltage-controlled oscillator and loop filter, completing a phase-locked-loop implementation. Its fractional-N maximum operating frequency is 3.0 GHz, whereas its integer-N maximum is 1.2 GHz. The supplied source information does not provide the complete prescaler selection matrix, reference-frequency limits, minimum channel spacing, phase-noise values, tuning-voltage limits, or register map, so those values remain unverified in this record. Typical uses include RF local oscillators, upconversion and downconversion paths, wireless communication infrastructure, test-and-measurement equipment, and frequency-generation systems. The separate VP connection can be valuable when the external VCO and loop-filter design requires a tuning voltage beyond the range supported by the synthesizer supply itself. Designers should treat the ADF4251BCP as the synthesizer element rather than a complete standalone oscillator. The external VCO, loop filter, reference source, decoupling network, and controlled impedance layout directly determine lock range, phase noise, spur performance, and tuning accuracy. Verify all register settings and interface timing against the manufacturer datasheet before firmware and PCB release. This product record combines verified manufacturer capabilities, distributor availability references, package information, application guidance, and a strict comparison of the ADF4251 family. It also separates documented facts from unavailable electrical details, helping engineers evaluate the ADF4251BCP without introducing unverified substitute or pricing claims.

RFQ İletişim

ADF4252BCP

ADF4252BCP - 3 GHz Dual Fractional-N PLL | Analog Devices

The Analog Devices ADF4252BCP is a dual fractional-N/integer-N frequency synthesizer with RF operation up to 3 GHz, integer-N operation up to 1 GHz, and a 24-lead LFCSP package with exposed pad. It operates from a 3.3 V power supply, provides a separate VP connection for extended tuning voltage up to 5 V, and provides programmable RF prescalers of 4/5 and 8/9. Its three-wire serial interface supports digital programming of the dual synthesizer architecture. A frequency synthesizer is a clock-and-timing integrated circuit that generates a programmable output frequency from a stable reference. The ADF4252 belongs to the phase-locked-loop hierarchy: fractional-N or integer-N frequency synthesizer → phase-locked loop → clock generator and timing IC. This type of device is used when an RF system requires a locally controlled oscillator with fine frequency resolution and direct digital programming. The dual architecture permits independent RF and IF synthesis paths, which is valuable in wireless receivers and transmitters requiring both an RF local oscillator and an intermediate-frequency local oscillator. The RF section reaches 3 GHz, while the integer-N range reaches 1 GHz. The programmable dual-modulus prescaler supports integer-N and fractional-N operation, and programmable charge-pump currents allow loop behavior to be adapted for different reference and phase-noise requirements. A reported phase-noise figure of 103 dBc/Hz at a 5 kHz offset is identified for GSM-related operation. The manufacturer data sheet also describes a narrow-loop filter configuration intended to meet steady-state spurious specifications, using the lowest charge-pump current for normal operation and the maximum setting during a fast-lock frequency jump. This technique separates acquisition performance from final steady-state performance. Typical applications include RF upconversion and downconversion in wireless receivers, RF transmitters, GSM-compatible communication equipment, instrumentation, and other systems requiring independently programmed RF and IF local oscillators. The 3.3 V core supply and programmable serial interface simplify integration with embedded control hardware. A key design consideration is reference and loop planning. The reference frequency, prescaler, feedback divider, charge-pump current, and loop-filter values must be selected together to meet both phase-noise and lock-time targets. The separate VP supply should also be evaluated against the required tuning-voltage range rather than assumed to follow the digital supply automatically. This page consolidates the verified manufacturer specifications, distributor information, package details, replacement findings, and practical design considerations into one engineering-oriented reference for evaluating the ADF4252BCP in RF and IF frequency-generation systems.

RFQ İletişim

ADF4252BCPZ

ADF4252BCPZ - 3 GHz Dual Fractional-N PLL | Analog Devices

The Analog Devices ADF4252BCPZ is a dual fractional-N and integer-N frequency synthesizer with a maximum frequency of 3 GHz, housed in a 24-lead WFQFN exposed-pad CSP package. It generates independent RF and IF local-oscillator signals for wireless receiver and transmitter systems. The RF synthesizer uses a sigma-delta fractional-N architecture, while the device also supports integer-N operation for applications requiring integer frequency division. A frequency synthesizer is a timing-control semiconductor that uses a phase-locked loop, or PLL, to convert a stable reference frequency into an accurately programmable output. In its dual-channel form, the ADF4252 supports two synthesis paths within one package, reducing board area in RF and IF chains that require multiple local oscillators. The device must be paired with an external voltage-controlled oscillator and loop filter to complete each PLL. The ADF4252BCPZ features a programmable reference divider, a low-noise digital phase-frequency detector, and a precision charge pump in each synthesizer section. Its fractional-N RF channel allows fine frequency resolution without requiring an unusually high reference frequency. The manufacturer documentation also describes fast-lock operation, where the charge-pump current is increased during a frequency jump and then returned to the setting required for narrow-loop steady-state spurious performance. Control uses a simple SPI-compatible serial interface. The serial data input, serial clock, and latch-enable signals transfer 24-bit words into the appropriate internal latch. This architecture permits programming of divider, charge-pump, reference, and fractional-N settings from a host microcontroller or programmable-logic controller. Register-map details, timing, and recommended control sequences should be implemented from the manufacturer datasheet. Typical applications include wireless transceiver local oscillators, IF conversion stages, radio-frequency test equipment, microwave communication links, and instrumentation requiring independent programmable RF and IF frequencies. The integrated dual-synthesizer architecture is especially useful when board area is constrained but two phase-locked loops are required. A successful design must account for reference-clock jitter, loop-filter bandwidth, VCO phase noise, charge-pump current, RF output power, supply sequencing, and the exposed-pad thermal path. Place input and output decoupling capacitors close to their associated pins, keep the SPI routing compact and ground-referenced, and provide a low-impedance ground connection to the exposed pad. This product page consolidates the manufacturer's device description, package information, interface details, replacement guidance, and application-specific design guidance into a focused engineering reference for evaluating the ADF4252BCPZ in a dual-PLL RF design.

RFQ İletişim

ADF4350BCPZ

ADF4350BCPZ - Wideband Synthesizer w/ Integrated VCO | ADI

The Analog Devices ADF4350BCPZ is a wideband frequency synthesizer with an integrated voltage controlled oscillator (VCO) that operates on a fundamental output frequency range of 2200 MHz to 4400 MHz. Housed in a 32-lead LFCSP (5 mm x 5 mm) exposed-pad package, the part enables fractional-N or integer-N phase-locked loop (PLL) implementations when paired with an external loop filter and an external reference frequency. Divide-by-1/2/4/8/16 output dividers extend usable RF outputs as low as 137.5 MHz. A PLL frequency synthesizer is a closed-loop feedback system that compares a divided VCO output to a reference oscillator and adjusts the VCO tuning voltage until the divided frequency phase-locks to the reference. Fractional-N division enables finer frequency resolution than integer-N at the cost of additional noise-shaping circuitry, while integer-N mode delivers the lowest in-band phase noise. ADF4350 supports both modes, letting engineers trade off resolution against phase-noise performance for applications ranging from cellular base stations to test instrumentation. Key features include an output frequency span of 137.5 MHz to 4400 MHz, a 3-wire SPI-compatible serial interface for register programming, an auxiliary RF output that can be muted independently, and a phase-frequency detector (PFD) that supports reference frequencies up to 200 MHz. The integrated VCO eliminates the need for a discrete resonator, simplifying BOM and reducing board area in radio designs. According to the Analog Devices datasheet, the part supports channel spacing down to a sub-1 Hz resolution when used in fractional-N mode with proper modulator settings. The architecture combines a high-resolution sigma-delta modulator, a low-noise charge-pump, and a wideband VCO that is prescaled for stable locking across process and temperature variations. The mute function is both pin- and software-controllable, allowing the part to be shut down during idle periods in time-division duplex systems to save power. Typical applications include cellular base-station transceivers (GSM, UMTS, LTE, 5G FR1), microwave point-to-point and point-to-multipoint links, satellite communications up-converters, wireless backhaul infrastructure, and bench-top RF signal generators. The 32-lead LFCSP package provides a compact thermal envelope suitable for dense multi-radio boards. When designing with the ADF4350BCPZ, route the charge-pump supply through a ferrite bead and bypass it with a 10 nF cap to minimize reference spurs, and place the loop-filter components as close to the CP and VT pins as practical. Avoid routing digital SPI lines adjacent to the RF outputs to prevent crosstalk into the synthesized spectrum. This page synthesizes distributor pricing, drop-in alternatives drawn from the Analog Devices family, and practical layout notes that complement - but do not replace - the manufacturer datasheet.

RFQ İletişim

Alt Kategoriler

Ürünler (39.000+)

ADF4155BCPZ - 4 GHz Fractional-N PLL | Analog Devices

ADF4156BCPZ - 6.2GHz Fractional-N PLL | Analog Devices

ADF4156BRUZ - 6.2 GHz Fractional-N PLL Synthesizer | Analog Devices

ADF4157BCPZ - 6 GHz Fractional-N PLL | Analog Devices

ADF4157BRUZ - 6 GHz Fractional-N Frequency Synthesizer | Analog Devices

ADF4159CCPZ - 13 GHz Fractional-N PLL Synthesizer | Analog Devices

ADF4169CCPZ - 13.5 GHz Fractional-N Synthesizer | Analog Devices

ADF4193BCPZ - 3.5 GHz Fast-Settling PLL Synthesizer | Analog Devices

ADF4196BCPZ - 6 GHz Fast-Settling PLL | Analog Devices

ADF4208BRU - Dual 2 GHz Integer-N PLL | Analog Devices

ADF4208BRUZ - 2 GHz Dual PLL Synthesizer | Analog Devices

ADF4210BCP - 1.2 GHz Dual RF/IF PLL | Analog Devices

ADF4210BRU - 1.2 GHz Dual RF/IF PLL | Analog Devices

ADF4211BCP - Dual RF/IF Integer-N PLL | Analog Devices

ADF4212BRU - Dual Integer-N 0.5/1.2GHz PLL | Analog Devices

ADF4212BRUZ - 2.7GHz PLL Synthesizer | Analog Devices

ADF4213BCP - 3 GHz Dual RF/IF PLL Synthesizer | Analog Devices

ADF4213BRUZ - 3 GHz PLL Clock Synthesizer | Analog Devices

ADF4216BRU - Dual Integer-N PLL Synthesizer 1.2 GHz | Analog Devices

ADF4218BRU - 2.5GHz Dual RF PLL Synthesizer | Analog Devices

ADF4251BCP - 3.0 GHz Fractional-N Synthesizer | Analog Devices

ADF4252BCP - 3 GHz Dual Fractional-N PLL | Analog Devices

ADF4252BCPZ - 3 GHz Dual Fractional-N PLL | Analog Devices

ADF4350BCPZ - Wideband Synthesizer w/ Integrated VCO | ADI