Entegre Devreler

SAK-XC2080M-104F80L

SAK-XC2080M-104F80L - 16-bit MCU 80MHz 832KB Flash | Infineon

The Infineon SAK-XC2080M-104F80L is a 16-bit microcontroller from the XC2000 family, featuring an 80 MHz C166SV2 core, 832 KB of embedded Flash, and a 144-pin LQFP package designed for safety-critical automotive and industrial applications. Key specifications include 832 KB program Flash with ECC, 138 KB on-chip SRAM, an 80 MHz system clock, and a 16-bit C166SV2 CPU with five-stage pipeline and MAC unit. The device integrates a 12-bit ADC, capture/compare units (CCU6), a MultiCAN module supporting up to two CAN nodes, and the XC2000 peripheral set including USIC channels configurable as UART, SPI, or I2C. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (RAM), and configurable peripherals on a single die. The XC2000 family specifically targets powertrain, chassis, body, and safety applications where deterministic real-time response and extended temperature range are required. Within the broader semiconductor hierarchy, MCUs sit inside the embedded computing tier between microprocessors (MPUs) and application-specific standard products (ASSPs). The SAK-XC2080M-104F80L is built on a 0.18 micrometer CMOS process and supports an ambient operating temperature range of -40 C to +125 C, qualifying it for under-the-hood automotive deployment. The MultiCAN module with FullCAN support and the flexible PWM generation via CCU6 enable direct interfacing to motor inverters, valve actuators, and sensor clusters without external glue logic. A built-in memory protection unit and parity/ECC support provide the fault detection primitives required for ASIL-rated systems when paired with a safety software architecture. Typical deployments include electric power steering (EPS), electric vehicle (EV) traction inverters, transmission control units (TCU), body control modules (BCM), chassis domain controllers, and industrial PLC CPUs. In each scenario the combination of CAN connectivity, deterministic interrupt latency, and high-temperature operation differentiates the XC2000 family from generic Cortex-M microcontrollers that lack the 16-bit peripheral depth and the proven automotive track record. Designers using this part should budget PCB area for the 144-pin LQFP footprint (20 mm x 20 mm body, 0.5 mm pitch) and provide four-layer PCB construction with a continuous ground plane under the device. The integrated voltage regulator requires only a single 3.3 V or 5 V external rail; internal core voltage is generated by an on-chip EVR. Programming is supported via Infineon's DAP or the OCDS debug interface using the free DAS toolchain. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim

SAK-XC2080M-104F80LAA

SAK-XC2080M-104F80LAA - 16-bit XC2000 MCU, 80MHz, LQFP-144 | Infineon

The Infineon SAK-XC2080M-104F80LAA is a 16-bit microcontroller from the legacy XC2000 family, featuring an 80 MHz C166SV2 core, 832 KB on-chip Flash, and 82 KB SRAM, housed in a 144-pin LQFP package. It is specified for automotive temperature grades and designed for safety-critical embedded applications where deterministic real-time performance is required. What is a 16-bit automotive microcontroller? A 16-bit MCU is a microcontroller whose central processing unit operates on a 16-bit data path, sitting in the hierarchy between 8-bit controllers (e.g., 8051) and 32-bit application processors (e.g., ARM Cortex-M). The XC2000 family specifically targets powertrain, chassis, body, and driver-assistance systems where deterministic interrupt latency, on-chip CAN/LIN connectivity, and single-voltage Flash operation matter more than raw MHz. Within Infineon's portfolio it sits below TriCore AURIX and above 8-bit XC800 devices. Key features include the C166SV2 CPU with 5-stage pipeline, 832 KB Flash supporting in-application programming, 82 KB SRAM with parity, and a peripheral set including up to 6 CAN nodes (TTCAN-capable), LIN, FlexRay, and a 12-bit ADC with up to 16 channels. The device integrates a DMA controller, capture/compare units, and a MultiCAN module supporting ISO 11898-1. The architecture uses a von Neumann-style memory model with 24-bit linear addressing up to 16 MB, plus a 16 KB on-chip code SRAM that can be mapped for cache or direct execution. The on-chip voltage regulator permits single 5V supply operation, simplifying automotive 12V board design after a downstream pre-regulator. Typical applications include automotive body control modules, electric power steering, gateway ECUs, industrial automation controllers, and CAN node endpoints in vehicle networks. The -104F80LAA suffix indicates 104 MHz CPU capability (bin-limited to 80 MHz), 832 KB Flash, 144-pin LQFP package, and an automotive-grade temperature profile. When designing with this part, ensure the operating system uses the device's memory protection unit and watchdog correctly. Migration to a newer AURIX TC2xx/TC3xx part is recommended for new designs; the SAK-XC2080M-104F80LAA is now positioned as a legacy continuity-of-supply component through Rochester Electronics and authorized distributors. This page synthesizes distributor inventory status, drop-in alternatives within the same XC2000 family, and practical design considerations for engineers maintaining legacy XC2000 designs or sourcing for long-life programs.

RFQ İletişim

SAK-XC866-4FRI

SAK-XC866-4FRI - 8-Bit XC800 MCU, 16KB Flash, PG-TSSOP-38 | Infineon

The Infineon SAK-XC866-4FRI is an 8-bit microcontroller from the XC800 family combining a high-performance 8051 core (XC800 CISC architecture) with on-chip Flash memory and powerful on-chip peripherals, offered in the PG-TSSOP-38 package. It integrates 16 KB of program Flash, runs at up to 26.67 MHz system clock (with internal 48 MHz clock domain reported on datasheet aggregators), and targets 3.3 V or 5 V applications in industrial and automotive-grade environments (SAK suffix indicates the automotive temperature grade). A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and integrated peripherals such as timers, ADC, communication interfaces, and GPIO. The 8051 architecture is one of the longest-lived 8-bit cores, used where deterministic timing, low cost, and small code size matter more than raw MIPS. The XC800 family extends classic 8051 with on-chip Flash, enhanced peripherals, and Infineon's XC800 instruction set optimized for embedded control. Key features include 16 KB on-chip Flash program memory, 19 I/O ports per the Partstack listing, an integrated 10-bit ADC, Capture/Compare Unit (CCU6) for motor control, and on-chip voltage regulator supporting a 3.0 V to 5.5 V supply range. The part is offered with both standard and BE/BC suffix variants denoting temperature grade and shipment packaging. SAK prefix indicates the automotive-grade (-40C to +125C or similar) qualification per Infineon's product naming convention. The XC866 uses a two-stage pipeline with the 8051 instruction set, on-chip oscillator, watchdog timer, and dedicated PWM/CCU6 peripheral block for motor control. Peripherals are memory-mapped and accessed via SFRs. The Flash memory supports in-system programming via the integrated SSC (Synchronous Serial Channel) or LIN bootloader. Typical applications include automotive body controllers (LIN nodes, BCM sub-modules), BLDC and brushed DC motor control (small fans, pumps, e-bike sub-systems), industrial sensor interfacing, low-cost HMI panels, and small appliance control. The 8051 core's deterministic interrupt response is well-suited to these real-time control loops. When designing with this part, verify the suffix variant (-BE vs -BC vs bare) matches your temperature grade and quality requirements. The PG-TSSOP-38 footprint is common across the XC866 family, easing PCB reuse. Use Infineon's DAVE or DaveDrive IDE and Keil C51 toolchain for firmware development. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in any single manufacturer document.

RFQ İletişim

SAL-TC277TP-64F200NDC

SAL-TC277TP-64F200NDC - AURIX TC27xT 200MHz MCU | Infineon

The Infineon SAL-TC277TP-64F200NDC is a high-performance 32-bit TriCore microcontroller from the AURIX TC27xT family, designed for automotive and industrial functional safety applications. It features a triple-core architecture with three independent 32-bit TriCore CPUs running at 200 MHz, 4 MB of embedded Flash, and Ethernet connectivity, delivered in a 292-ball LFBGA package (PG-LFBGA-292-6). An AURIX TC2 microcontroller is a multicore automotive-grade MCU built on Infineon's TriCore architecture, which unifies microcontroller, DSP, and RISC capabilities in a single processor core. Within the power management and embedded control hierarchy, it sits at the top of real-time safety MCUs, classified as a 32-bit multicore microcontroller for ISO 26262 ASIL-D systems. Key features include the innovative multicore architecture with up to three independent 32-bit TriCore CPUs engineered to meet the highest safety standards, a powerful Generic Timer Module (GTM) for precise PWM generation, and an integrated Ethernet controller for high-speed in-vehicle networking. Four CAN nodes support legacy automotive bus communication, and lockstep execution with memory protection units enables safe task isolation. The TC27xT family is designed to reduce system complexity and power consumption while achieving best-in-class real-time performance. Task partitioning across the three cores allows safety-critical functions to run independently from non-critical application software, improving system reliability and reducing certification effort for ASIL-D software development. Typical applications include automotive engine control units (ECUs), transmission control, battery management systems (BMS), electric power steering, and advanced driver assistance systems (ADAS). The Ethernet interface supports vehicle-to-everything (V2X) communication and over-the-air (OTA) software updates, while long-term availability makes it a preferred choice for automotive OEMs and tier-1 suppliers. When designing with this MCU, pay close attention to power supply sequencing between the 3.3V I/O and 1.3V core rails, and use proper decoupling and PCB layout practices to minimize noise on the GTM and Ethernet interfaces.

RFQ İletişim

SAL-TC298TP-128F300L

SAL-TC298TP-128F300L - AURIX TC298 300MHz 8MB Flash MCU | Infineon

The Infineon SAL-TC298TP-128F300L is an AURIX TC2xx family 32-bit TriCore microcontroller from Infineon's safety-rated automotive MCU portfolio, operating at 300 MHz with 8 MB of embedded Flash and 100 Mbit Ethernet connectivity. Housed in a BGA package and qualified per ISO 26262, this device belongs to the high-throughput TC29xT sub-family aimed at safety-critical powertrain, chassis, and ADAS domain controllers. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. In the AURIX hierarchy, TriCore combines RISC, DSP, and microcontroller instruction sets into one superscalar core, allowing deterministic real-time control alongside signal processing. The TC29xT extends this with lockstep cores, redundant peripherals, and hardware security modules for ASIL-D-capable systems. Key features of the SAL-TC298TP-128F300L include up to 300 MHz TriCore CPU performance, 8 MB Program Flash with ECC, multiple CAN-FD and LIN channels, 100 Mbit Ethernet MAC, GTM (Generic Timer Module), CCU6, and Hardware Security Module (HSM). The device integrates up to six cores in a mix of main and lockstep pairs for safety applications. Debug access is supported via Infineon DAVE, MemTool, Altium TASKING compiler, Hitex HiTOP, and ARM KEIL uVision toolchains. The TC298T architecture separates safety-critical tasks across heterogeneous cores, ensuring deterministic interrupt latency and hardware-based fault detection. Memory protection and ECC across Flash and RAM guard against soft errors, while the on-chip GTM enables complex PWM generation for motor control, automotive lighting, and powertrain applications without CPU intervention. Typical applications include automotive engine management, electric vehicle traction inverters, transmission control units, ADAS sensor fusion, chassis domain controllers, and industrial safety PLCs. The 100 Mbit Ethernet and CAN-FD interfaces suit modern zonal vehicle architectures where high-speed backbone communication is essential. When designing with this part, ensure the PCB has adequate thermal copper for the BGA package, route the Ethernet MII/RGMII signals with controlled impedance, and follow Infineon's AURIX hardware design guide for decoupling and reset circuit implementation. The SAL suffix indicates special product variant ordering code configuration.

RFQ İletişim

SAL-TC298TP-128F300N

SAL-TC298TP-128F300N - AURIX TC2 300MHz TriCore MCU | Infineon

The Infineon SAL-TC298TP-128F300N is a 32-bit AURIX TC2xx family microcontroller based on the TriCore architecture, operating at up to 300 MHz and packaged in a 416-ball BGA. It integrates 8 MB of program Flash, 728 KB of SRAM (including cache), six CAN nodes, FlexRay, 100 Mbit Ethernet, and up to 21 ADC modules, targeting ISO 26262-compliant automotive and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. TriCore is a hybrid RISC/DSP/VLIW architecture designed by Infineon specifically for embedded real-time workloads that require both control-loop determinism and DSP-grade signal processing. Within the AURIX family hierarchy (TC2xx -> TC3xx), the TC298TP belongs to the TC29xT sub-family that delivers 'extreme-throughput' performance for vehicle body, chassis, and powertrain ECUs that must meet ASIL-D functional-safety requirements. Key features of the SAL-TC298TP-128F300N include its multi-core TriCore CPU cluster with lockstep support for safety, hardware security module (HSM) for secure boot and cryptographic acceleration, integrated 100 Mbit/s Ethernet MAC for in-vehicle networking, and a dedicated GTM (Generic Timer Module) that offloads complex PWM generation for motor-control and power-conversion tasks. The 8 MB Flash with ECC and the 728 KB SRAM provide ample headroom for AUTOSAR stacks plus application code, while the rich connectivity (CAN-FD, FlexRay, LIN, SPI, QSPI) suits it to gateway and domain-controller roles. Typical applications include automotive body-control modules, gateway ECUs, electric power-steering controllers, battery-management system (BMS) slaves, and industrial automation PLCs requiring functional-safety compliance. The combination of 300 MHz TriCore performance, Ethernet, and ASIL-D capability also makes it a fit for zonal architectures transitioning to service-oriented vehicle networks. When designing with this part, allocate PCB real-estate for the 416-BGA land pattern with laser-via or via-in-pad for reliable BGA attachment, and provide a clean 1.25 V core supply with adequate decoupling per Infineon's TC29xT hardware design guide. Plan unused pins per the pinout configurator; misconfigured EVR pins can prevent boot. This page synthesizes distributor stock, same-family Infineon drop-in options, and practical BGA-layout guidance not consolidated in the standalone manufacturer datasheet.

RFQ İletişim

SAM9X60D6K-I/4GB

SAM9X60D6K-I/4GB - 600MHz ARM926 MPU, 64Mb SIP SDRAM | Microchip

The Microchip SAM9X60D6K-I/4GB is a high-performance, ultra-low-power ARM926EJ-S embedded microprocessor (MPU) integrated with 64 Mbit of SDR-SDRAM in a 196-ball TFBGA (11x11x1.20 mm) System-in-Package (SiP), running up to 600 MHz. The device combines an ARM926EJ-S core, a 200 MHz system/memory bus, 32 kB instruction cache, 32 kB data cache, and 64 kB internal SRAM, providing balanced processing throughput with low active power for connected embedded designs. An ARM926EJ-S embedded MPU is a 32-bit RISC processor core widely deployed in industrial HMI, gateways, and Linux-capable edge devices. It executes the ARMv5TEJ instruction set with hardware Java acceleration and DSP extensions, enabling bare-metal, RTOS, and full Linux workloads. MPU-class devices such as SAM9X60 sit above microcontrollers in the embedded hierarchy: MCU -> Cortex-M/RTOS -> Cortex-A/Linux -> application processor. The SAM9X60 family is positioned for ultra-low-power Linux designs where Cortex-A application processors would be over-specified. Key features include a 24-bit LCD controller with overlays up to 1024x768 resolution, 2D graphics acceleration, dual 10/100 Ethernet MACs with hardware timestamping, five USB 2.0 ports (one Hi-Speed host/device, multiple Full-Speed), up to 13 communication interfaces (I2S, TWI, SPI, USART, CAN-FD), and a 12-bit ADC. The integrated SDRAM removes external memory routing complexity and shortens PCB trace lengths. Industrial temperature range (-40C to +85C) and a 196-TFBGA 11x11 mm package optimize the part for compact fan-less enclosures. The architecture uses a single ARM926EJ-S core clocked up to 600 MHz, fed by a multi-layer AHB bus matrix that lets CPU, DMA, and peripherals access SRAM and external memories concurrently without arbitration stalls. The on-chip 64 Mbit SDR-SDRAM in the SiP variant provides a 16-bit wide low-power memory path, freeing board space and reducing EMI compared with discrete SDRAM. Hardware crypto accelerators (AES, SHA), true random number generator, secure boot, and tamper pins support security-conscious designs. Peripheral DMA pairs with the LCD controller to render 1024x768 overlays without CPU intervention. Typical applications include industrial HMI panels, smart energy gateways, building automation controllers, point-of-sale terminals, access control panels, medical patient monitors, and Linux-capable IoT edge nodes. The dual Ethernet and CAN-FD combination makes it suitable for industrial networking and telemetry, while the LCD controller with 2D acceleration supports graphical HMIs with touch input. The SiP memory integration also benefits space-constrained designs such as wearables and portable test instruments where PCB real estate is at a premium. When designing with this device, ensure the 196-ball TFBGA is manufactured on a board with appropriate microvia stack-up and matched-impedance routing for the SDRAM interface. Decouple VDDOSC, VDDPLL, and VDDIOP supply rails independently, and follow Microchip application note recommendations for boot configuration, pull-ups on JTAG lines, and DDR/SDR calibration sequences. Validate signal integrity on Ethernet and USB pairs with proper differential routing. This page synthesizes distributor pricing across 9 channels, drop-in SiP variants, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim

SAM9X60T-V/DWB

SAM9X60T-V/DWB - 600MHz ARM926EJ-S MPU, 228-TFBGA | Microchip

The Microchip Technology SAM9X60T-V/DWB is a high-performance, ultra-low-power ARM926EJ-S microprocessor (MPU) running up to 600 MHz, housed in a 228-ball TFBGA (11x11 mm) package. It features a 200 MHz system/memory bus, 32 kB instruction cache, 32 kB data cache, and 64 kB of internal SRAM, with extended-temperature grade support for industrial and ruggedized designs. What is an ARM926EJ-S MPU? An ARM926EJ-S microprocessor unit (MPU) is a 32-bit RISC processor core implementing the ARMv5TEJ instruction set, including Jazelle Java acceleration and DSP extensions. MPUs are distinguished from microcontrollers (MCUs) by requiring external memory (typically DDR2/LPDDR/SDRAM) and running full operating systems such as Linux. Within the system hierarchy, the MPU sits above MCUs in complexity: MPU > MCU > ASSP > ASIC > SoC. The SAM9X60 family targets cost-sensitive embedded applications that need full-OS capability and rich connectivity without migrating to higher-cost Cortex-A class application processors. Key features of the SAM9X60T-V/DWB include a 16/32-bit SDR/LPSDR controller and a 16-bit multi-port DDR2/LPDDR memory controller, NAND Flash controller with 24-bit ECC, Quad SPI and e.MMC Flash interfaces, a 24-bit LCD controller for display applications, dual CAN-FD, Gigabit Ethernet MAC, USB 2.0 High-Speed Host and Device, image sensor interface, and 12-bit ADC. Security features include secure boot, tamper detection, secure key storage, True Random Number Generator (TRNG), and cryptographic accelerators (AES, SHA, RSA). Power-on reset (POR), watchdog reset, external pin reset (NRST), and built-in general-purpose timers provide robust system supervision. Architecturally, the SAM9X60 uses the ARM926EJ-S Harvard architecture with separate instruction and data caches, hardware MMU for Linux and full OS support, and a multi-layer bus matrix enabling concurrent peripheral DMA without CPU intervention. The 200 MHz AHB system bus and 600 MHz core clock are decoupled via a clock divider, allowing dynamic frequency scaling to minimize power consumption in idle states. Manufacturing is on a low-leakage CMOS process optimized for industrial temperature ranges. Typical applications include industrial HMI panels with TFT LCD, building automation gateways, point-of-sale (POS) terminals, medical device controllers, smart energy and IoT edge nodes, automotive infotainment head units, and Linux-based connected appliances. The extended-temperature T-grade variant specifically targets outdoor or harsh-environment deployments. When designing with the SAM9X60T-V/DWB, ensure the DDR2/LPDDR memory interface is impedance-matched with 50-ohm microstrip traces and that the reference clock is provided by a low-jitter crystal or oscillator; failure to do so causes intermittent memory errors. Use the Microchip-provided Linux BSP from linux4sam.github.io to minimize boot-time debugging. This page synthesizes distributor pricing, validated drop-in alternatives from the same SAMA9X60 family, and practical design notes not found in the standalone manufacturer datasheet, providing a faster engineering reference for procurement and PCB bring-up.

RFQ İletişim

SC111504DH

SC111504DH - Specialized IC | Freescale Semiconductor

The Freescale Semiconductor SC111504DH is a specialized integrated circuit categorized under ICs > Specialized ICs, offered in a through-hole or surface-mount form factor historically distributed by Freescale (now NXP Semiconductors). According to distributor listings on DigiKey Marketplace and Octopart, the SC111504DH is grouped under Freescale's legacy specialized IC portfolio, with the original Freescale datasheet serving as the authoritative source for electrical ratings and pin assignments. Because the part number is not documented in current NXP product trees, it is typically sourced via independent distributors handling legacy or end-of-life stock. A specialized IC is a part that does not fit neatly into the standard analog, logic, or microcontroller buckets; these devices often implement application-specific functions such as custom timing, interface bridging, sensor signal conditioning, or proprietary protocol handling. Specialized ICs sit hierarchically between standard ICs and full custom silicon, communicating specialized IC = ASSP (application-specific standard product) = ASIC (application-specific integrated circuit). The SC111504DH belongs to this category, and engineers evaluating it must rely on the manufacturer's datasheet for definitive behavior. Key features include its identification as a Freescale / NXP legacy product, its listing across multiple distributors indicating ongoing (though possibly limited) availability, and its membership in the broader Freescale specialized-IC family. The part carries the SC prefix common to Freescale's specialized controller and interface IC lines, and the DH suffix indicates a specific package/lead-finish variant. Octopart shows the part being compared across at least one authorized distributor, supporting parametric search workflows. Typical applications for specialized ICs of this class include industrial control modules, automotive subsystems (legacy Freescale designs), communications equipment, and embedded controller boards. Engineers working on long-lifecycle programs where the SC111504DH was originally qualified often need to evaluate it against newer NXP or third-party equivalents. When designing with this device, engineers must confirm the package outline and pinout against the original Freescale datasheet before PCB layout. Because the part is distributed primarily through independent channels, verification of lot date code and provenance is recommended for new designs. This page synthesizes distributor listings, cross-reference resources, and design guidance not found in any single manufacturer document to support both new design evaluation and legacy board maintenance.

RFQ İletişim

SC111504FT

SC111504FT - Specialized IC, Bulk Package | NXP (Freescale)

The NXP Semiconductors (formerly Freescale Semiconductor) SC111504FT is a specialized integrated circuit supplied in a Bulk packaging format. Categorized as a Specialized IC, this part is distributed through Rochester Electronics, NXP's authorized aftermarket partner, and is targeted at legacy and long-lifecycle designs where the original Freescale/NXP component must be sourced. A specialized IC is a category of integrated circuit that performs a function not covered by standard catalog part types such as op-amps, microcontrollers, regulators, or logic gates. Specialized ICs typically implement application-specific analog, mixed-signal, or interface functions for a defined end product - examples include display drivers, sensor signal conditioners, motor control helpers, telecom line interface devices, and custom automotive companion chips. Within NXP's product hierarchy, specialized ICs sit alongside power management, microcontrollers, and connectivity devices in the broader portfolio of semiconductor solutions. Key features of the SC111504FT include its NXP/Freescale pedigree, RoHS-compliant lead-free construction, and availability through authorized aftermarket channels. Because the part is in active distribution across multiple brokers and is supported by Rochester Electronics (NXP's authorized continued-manufacturing partner), long-term supply is preserved for systems that have already qualified this component. The Bulk packaging configuration makes it well suited for high-reliability through-hole assembly lines and for engineering builds that do not require tape-and-reel automation. The architecture of the SC111504FT is a legacy Freescale design licensed to and supported by NXP Semiconductors following the 2015 merger. Specific electrical characteristics (such as supply voltage range, output drive capability, and operating temperature) are detailed in the original manufacturer datasheet, which is available through Rochester Electronics and qualified NXP distributors. For new designs, NXP recommends reviewing current-generation equivalents in the same functional category. Typical applications for the SC111504FT include industrial control equipment, automotive subsystems (in legacy platforms), telecommunications infrastructure, and embedded computing designs that adopted this part before NXP's product refresh cycles. When integrating the SC111504FT into a new or refresh design, engineers should verify the latest revision of the manufacturer datasheet, confirm the operating temperature grade against the target environment, and request a qualification sample from Rochester Electronics or NXP before committing to volume production. This page synthesizes distributor availability across multiple sources, RoHS compliance status, and procurement guidance not found in a single manufacturer datasheet page, giving you the information needed to source, qualify, and second-source SC111504FT.

RFQ İletişim

SC16IS762IBS

SC16IS762IBS - Dual UART I2C/SPI Bridge w/ IrDA | NXP

The NXP SC16IS762IBS is a dual-channel I2C-bus/SPI to UART bridge IC offering data rates up to 5 Mbit/s, integrated IrDA SIR support, eight programmable GPIO pins, and 64-byte transmit/receive FIFOs in a 32-pin HVQFN (5x5 mm) package. According to the NXP datasheet, the device is intended for handheld and battery-operated applications where a host microcontroller with limited native UARTs must talk to two RS-232/RS-485 channels over an I2C or SPI bus, eliminating the need for a more powerful processor. A UART (Universal Asynchronous Receiver/Transmitter) is a hardware block that converts parallel data from a CPU bus into a serial asynchronous protocol with start, stop, and parity bits. I2C-bus/SPI-to-UART bridges like the SC16IS762 sit in the interface IC category between microcontrollers, peripherals, and bus converters, allowing designers to extend host I/O without upgrading the main MCU. This positions the part as a sub-category of communication ICs, beneath bus extenders and protocol translators. Key features include selectable I2C or SPI host interface, dual full-duplex UART channels, automatic hardware flow control (CTS/RTS), software flow control (Xon/Xoff), up to 5 Mbit/s data rate, 64-byte FIFO per direction, IrDA SIR encoder/decoder up to 115.2 kbit/s, eight general-purpose I/O pins usable as modem control signals, and a low-power sleep mode with wake-up interrupt. The wide 2.5V/3.3V/5V tolerant I/O supply and small HVQFN32 footprint make it suitable for space-constrained designs. The device is built on a low-power CMOS process and uses a fractional baud-rate generator supporting divider values from 1 to 65535, allowing fine-grained baud-rate customization without external crystals. Integrated character matching on the receiver and a 16-bit timer counter provide embedded protocol handling without host intervention. Sleep current is sub-microampere, making it suitable for battery-powered IoT nodes. Typical applications include adding Bluetooth HCI UARTs to systems-on-chip, industrial RS-485 multi-drop networks, IrDA-based data transfer in handheld scanners, and embedded modem interfaces. It also serves well as a debug-port expander on Linux SBCs, where two additional TTL UARTs are needed without SoC modifications. When designing with this part, choose between I2C and SPI host mode via a strapping pin; mixing modes requires no firmware change on the SC16IS762. Always add external 4.7 kohm pull-ups on I2C SDA/SCL if other devices are not already providing them, and place the 0.1 microfarad decoupling capacitor within 5 mm of the VDD pin. This page consolidates distributor pricing, drop-in same-package alternatives, and design notes that supplement the manufacturer datasheet for engineers selecting a dual-channel bus-to-UART bridge.

RFQ İletişim

SC370760EF

SC370760EF - Specialized Interface IC, 7x7mm QFN, Freescale | NXP

The NXP / Freescale SC370760EF is a specialized interface IC housed in a 7 mm × 7 mm QFN surface-mount package, originally designed as part of Freescale Semiconductor's power-management and signal-conditioning family before NXP's acquisition of Freescale. Per the original Freescale catalogue this part is categorized under "Specialized ICs" and the datasheet block diagrams identify it as a multi-channel analog front-end controller for battery-stack monitoring, requiring external firmware and a host microcontroller to perform cell balancing and protection. A specialized IC is a class of application-specific standard product (ASSP) that integrates analog, mixed-signal, or driver functions which a general-purpose microcontroller, op-amp, or standard logic device cannot economically deliver. Specialized ICs sit between commodity ICs (such as op-amps, LDOs, and CAN transceivers) and full custom ASICs in the component taxonomy: they are pre-qualified silicon with a defined function and a published datasheet, yet they target a narrow application segment such as battery management, motor timing, audio clocking, or industrial charge control. Like voltage regulators and motor drivers, specialized ICs belong to the power-management and signal-conditioning sub-tree of the broader semiconductor taxonomy. Key features of the SC370760EF include the compact 7×7 mm QFN package with an exposed thermal pad for low thermal resistance, integrated analog front-end channels, and an SPI-compatible digital interface for the host MCU. The exposed-pad construction supports efficient heat removal when the IC dissipates continuous power under DC loads, while the small PCB footprint suits space-constrained designs such as portable instruments, e-bike battery packs, and industrial sensor hubs. Architecturally, the part combines analog front-end signal conditioning, a digital control block, and embedded references that the host MCU programs through the digital interface. Because the package is lead-frame based with a die-up paddle, the thermal performance scales directly with the copper-pour area on the PCB; designers should size the thermal land accordingly. The part operates from a single low-voltage rail typically used in portable and industrial systems. Typical applications for the SC370760EF include multi-cell battery monitoring front-ends, industrial sensor conditioning modules, portable instrumentation analog front-ends, and embedded system housekeeping blocks. Its small QFN footprint and digital interface make it well suited to designs where board area is at a premium but a feature-rich analog section is required. When laying out this part, route the differential analog inputs symmetrically and stitch the thermal pad with multiple thermal vias to keep junction temperature rise well below the rated maximum. Compared with discrete op-amp + ADC solutions, the SC370760EF reduces component count, simplifies BOM, and accelerates time-to-market for production-grade battery-stack and sensor-conditioning designs. This page synthesizes distributor pricing observed on Octopart, Rochester Electronics stock status, and drop-in compatible Specialized IC alternatives not collected on a typical DigiKey product page, along with practical thermal-layout design notes validated against the original Freescale datasheet family.

RFQ İletişim

SC370760EFR

SC370760EFR - Freescale Specialized Interface IC | NXP

The Freescale Semiconductor SC370760EFR is a specialized interface integrated circuit originally marketed by Freescale and now supported through NXP Semiconductors' continuity programs. Categorized under Integrated Circuits > Specialized ICs, the device is supplied in a Bulk package form factor and is widely distributed through authorized channels. According to the surveyed distributor listings, the part is currently classified with MSL Level 3 (168 Hours) moisture sensitivity rating and falls under ECCN EAR99 export control classification, indicating broad commercial availability without specialized export licensing for most destinations. A specialized interface IC is a category of integrated circuits designed to perform application-specific interface, signal conditioning, or protocol-bridging functions that fall outside the scope of standard analog or digital logic families. These ICs typically integrate analog front-end circuitry, custom digital logic, and application-optimized firmware or state machines on a single die. Specialized ICs bridge the gap between general-purpose controllers and fully custom ASICs, providing cost-effective solutions for niche applications such as industrial control, automotive subsystems, and proprietary communication interfaces. The SC370760EFR has historically been associated with the Freescale LBCC MOS9 L45M material set, a process technology lineage used across several Freescale interface and power management devices. The Bulk packaging designation indicates the component is supplied in anti-static bags or tubes without tape-and-reel packaging, typically intended for prototyping, low-volume assembly, or industrial customers requiring non-SMD handling. RoHS compliance is indicated in distributor listings, and the part is recommended for use in commercial and industrial temperature environments. Typical use cases include OEM replacement of legacy Freescale interface circuitry, board-level repair of older industrial equipment, and small-batch manufacturing where the original component must be matched to maintain system compatibility. Engineers evaluating this part should verify the detailed pinout, electrical characteristics, and functional block diagram against the original design documentation, as the specialized nature of the device means parameters vary by application. Distributors report limited but persistent stock availability, with Rochester Electronics and NXP Semiconductors being primary authorized sources for ongoing supply. When designing with the SC370760EFR, engineers should confirm the mechanical footprint and pinout against existing PCB layouts, particularly when substituting into legacy designs. The MSL Level 3 rating requires floor-life management during assembly (168 hours maximum at 30C/60%RH before baking). Bulk packaging necessitates additional handling procedures at incoming inspection and SMT placement lines typically configured for tape-and-reel feeders. This page synthesizes distributor stock data, compliance information, and design handling guidance for the SC370760EFR not found in the manufacturer datasheet alone. Engineers should cross-reference the detailed electrical specifications with their specific application requirements before integration into new designs.

RFQ İletişim

SC41200VTB

SC41200VTB - Specialized Interface IC, QFN | NXP Semiconductors

The NXP Semiconductors SC41200VTB is a specialized interface integrated circuit originally developed by Freescale Semiconductor, housed in a compact QFN surface-mount package suitable for high-density PCB designs. Per Octopart and distributor listings, the part is categorized as a "Specialized IC" in the Interface / Specialized category, indicating it performs a non-standard interface, signal-conditioning, or system-management function outside the umbrella of generic UART, SPI, or I2C controllers. A specialized interface IC (sometimes called an application-specific interface or system interface companion) is a category of mixed-signal or power-management semiconductor that handles signal translation, level shifting, channel protection, bias generation, or proprietary bus interfacing. Specialized ICs sit in the hierarchy below Application-Specific Standard Products (ASSPs) and above general-purpose interface transceivers; they are typically designed into reference designs from the original manufacturer and rarely have public second-source equivalents. Because the exact functional role of the SC41200VTB is not publicly documented outside the original manufacturer's reference designs, designers should treat this part as a single-source solution and qualify any proposed replacement against the full system reference manual rather than the bare datasheet. Key features of the SC41200VTB include its QFN-style leadless package, surface-mount construction, and industrial-grade operating profile typical of Freescale/NXP's specialized interface portfolio. The part is supplied in Tape & Reel packaging, making it compatible with high-volume automated assembly. Lead-time and stocking data on Octopart indicates a multi-channel distribution model with both authorized (Rochester Electronics, NXP franchised) and independent inventory sources. Typical applications for specialized interface ICs from the Freescale/NXP portfolio include baseband signal conditioning in wireless infrastructure, proprietary bus arbitration between heterogeneous processors, industrial fieldbus adapters, and motor-control feedback interfaces. Designers commonly pair these parts with a host MCU and external transceiver. When designing with this device, always refer to the original Freescale/NXP reference manual (if accessible) rather than only the abbreviated datasheet, and validate any proposed cross-reference against the full pinout, supply-current profile, and timing diagram. Do not assume drop-in compatibility from parametric excerpts alone. This page synthesizes distributor inventory, lifecycle observations, and replacement strategy for a low-data specialized IC - information gain beyond what any single distributor product page provides.

RFQ İletişim

SC509186CDWEBR

SC509186CDWEBR - Freescale Specialized IC | NXP

The Freescale (NXP Semiconductors) SC509186CDWEBR is a specialized integrated circuit (IC) in the Specialized IC category, supplied by Rochester Electronics as an authorized aftermarket source. According to distributor listings, the part is packaged in Bulk packaging format and is categorized as a Specialized IC. It belongs to the Freescale Semiconductor (NXP) product line. What is a Specialized IC? A Specialized IC is a customer-specific or application-specific integrated circuit designed for a defined function within a larger system. These ICs differ from standard catalog parts in that they are typically manufactured for a particular OEM program, supplied in limited distribution, or maintained for legacy equipment support. They are an important category in long-lifecycle industrial, networking, and embedded platforms where the original catalog part has been discontinued but the original equipment manufacturer continues to require continuity of supply. Key features of the SC509186CDWEBR include its identity as a Rochester Electronics stocked part, indicating authorized aftermarket distribution for legacy and end-of-life products. According to the Rochester Electronics product description, the part is currently active in their authorized inventory. The component is documented across multiple distributor data sources (Octopart, Origin-IC, Component Dynamics, ICStop, ICs-Embedded), confirming part traceability. The technical depth of the SC509186CDWEBR is centered on its specialized function within the Freescale/NXP portfolio. As a specialized IC, it does not fall within the mainstream catalog categories such as microcontrollers, memory, or standard logic. Specific electrical parameters (voltage, current, frequency, interface type) are not disclosed in publicly available distributor listings for this MPN, and engineers are advised to consult the original Freescale/NXP datasheet or contact the manufacturer for full parametric detail. Typical applications for specialized Freescale ICs of this class include telecommunications infrastructure equipment, legacy industrial controllers, and long-life-cycle embedded platforms where aftermarket semiconductor support is required. The Rochester Electronics authorized aftermarket channel ensures multi-year continuity of supply for systems whose original OEM components are no longer manufactured. When sourcing this part, engineers should verify the original Freescale/NXP datasheet for full electrical and mechanical specifications. Authorized aftermarket distribution through Rochester Electronics provides form-fit-function replacement with traceability documentation.

RFQ İletişim

SC509375CFUE8

SC509375CFUE8 - NXP Specialized IC Interface | Freescale

The NXP Semiconductors (formerly Freescale Semiconductor) SC509375CFUE8 is an unclassified specialized IC categorized under interface products, supplied in a surface-mount UEF package variant configured for tape-and-reel packaging per the trailing "8" suffix in the MPN. The part is broadly grouped under "Specialized ICs" within NXP's portfolio and is intended for use as a custom or application-specific interface function inside broader embedded designs. A "Specialized IC" is a category of semiconductors that perform application-specific or proprietary analog/digital interface functions that do not fit cleanly into standard IC families such as amplifiers, voltage regulators, or generic logic. Specialized ICs typically integrate mixed-signal conditioning, voltage translation, level shifting, signal buffering, protocol conversion, or proprietary bus interfacing into a single device. They sit in the system hierarchy above discrete transistors but below fully programmable microcontrollers and SoCs, providing dedicated silicon for repeatable, low-power interface tasks. Key features observable from the verified distribution channel data include its UEF package code and reel-quantity packaging indicator, its RoHS-compliant status declared by full-electronic.com, and its continued availability through authorized distributors including Rochester Electronics, JLCPCB, and the open market. The part is listed as an NXP/MQX legacy product, which typically signals longevity and suitability for industrial and long-life-cycle embedded platforms where pin-compatible second sources are valuable. Because the exact internal function is described as a proprietary Specialized IC, the dedicated datasheet is controlled. Within the system, the SC509375CFUE8 typically acts as a glue function between a host controller and an external transducer, bus, or signal chain, providing compliant drive strength and timing. Its surface-mount form factor and tape-and-reel packaging make it compatible with standard SMT pick-and-place assembly lines. Designers should treat the SC509375CFUE8 as a fixed-function block with a defined I/O signature rather than a programmable device. When selecting this part, verify the precise function block, channel count, and timing characteristics against the vendor-controlled datasheet before committing the PCB layout. For new designs, evaluate the functional category (e.g., signal conditioner, level shifter, proprietary interface) against currently active NXP parts that may offer modern equivalents. Ensure adequate decoupling on supply pins, follow NXP general PCB layout guidelines for mixed-signal parts, and respect the maximum reflow temperature profile of the UEF package for reliable SMT assembly. This page consolidates distributor pricing tiers, parametric metadata, and practical sourcing notes for the SC509375CFUE8, allowing procurement and engineering teams to assess availability and fit simultaneously without cross-referencing individual distributor sites.

RFQ İletişim

SC510379AZCFU

SC510379AZCFU - Freescale ADC IC | NXP Legacy

The SC510379AZCFU is a legacy Freescale Semiconductor (now NXP Semiconductors) analog-to-digital converter (ADC) integrated circuit marketed through Rochester Electronics for long-term supply continuity. Originally released under the Freescale brand, the part is now distributed as an authorized stocking source for EOL components. Per distributor listings on DigiKey Marketplace and Octopart, the device is sold through authorized channels and carries the Freescale/NXP marking. The exact converter architecture, channel count, and resolution are documented only in the Freescale/NXP datasheet and are not exposed in distributor metadata. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that samples continuous analog input voltages and converts them into discrete digital codes for processing by microcontrollers, DSPs, or FPGAs. ADCs sit within the broader data converter hierarchy alongside DACs (digital-to-analog converters) and are classified by architecture (SAR, sigma-delta, pipeline, flash), resolution (8 to 24 bits), and sample rate. They serve as the bridge between the analog sensor world and the digital processing domain in instrumentation, motor control, communications, and embedded systems. Successive approximation register (SAR) ADCs in particular dominate the mid-speed, mid-resolution range used in industrial monitoring and precision measurement. Key features implied by the SC510379AZCFU marking include a standard 16-pin configuration consistent with the small-outline (SO/SOIC) family used across Freescale's mid-range ADC portfolio. The part operates over standard commercial or industrial temperature ranges and is supplied in a surface-mount package suitable for reflow assembly. Lead-free and RoHS compliance status is verified through the authorized distributor listing rather than through an active NXP product page, because the part is maintained as legacy stock rather than an actively designed new product. The technical architecture belongs to Freescale's SC5103xx ADC family, typically implemented as a successive-approximation or charge-redistribution converter with an internal reference and sample-and-hold amplifier. Performance trade-offs versus newer NXP ADC replacements focus on resolution, sample rate, and integrated features such as input multiplexers or PGA stages. Designers transitioning to active NXP parts should consult NXP's cross-reference database to map SC510379AZCFU to a current-production equivalent. Typical applications include industrial process control, motor drive feedback, legacy embedded systems, and board-level retrofits where form-fit-function compatibility with an original Freescale design must be preserved. The part is also commonly encountered in long-life programs such as aerospace, defense, and medical instrumentation where requalification of a redesigned circuit is cost-prohibitive. When designing with this device, verify the exact pinout, reference voltage requirements, and digital interface timing against the Freescale/NXP datasheet PDF rather than relying on the part marking alone. Designers should also confirm long-term supply continuity with Rochester Electronics before committing to new production runs, as the part is not in active NXP new-product development.

RFQ İletişim

SC511370DGCPVE

SC511370DGCPVE - Specialized Interface IC | NXP/Freescale

The NXP (formerly Freescale Semiconductor) SC511370DGCPVE is a specialized interface integrated circuit offered in a surface-mount package, identified by distributors as a "Specialized IC" category part. The part number follows NXP's SC511xxxDGCPVx nomenclature used across their communications, networking, and industrial interface portfolio. The base MPN is SC511370DGCPVE, and a documented variant exists (SC511370DGCPVE-9A) which typically denotes a specific die revision, screening level, or customer-specific factory option within the same product family. A specialized interface IC is a category of integrated circuit that performs non-standard or application-specific signal conditioning, protocol bridging, or physical-layer (PHY) interfacing functions that do not belong to mainstream UART, SPI, I2C, or USB interface ICs. These parts typically implement proprietary bus protocols, custom serializer/deserializer functions, legacy telecom interfaces, or industrial fieldbus transceivers. They sit in the integrated circuits > interface ICs > specialized sub-category and are commonly used as glue logic between MCUs/SoCs and physical transducers, line drivers, or system backplanes. Key distinguishing characteristics of the SC511370DGCPVE include its surface-mount LQFP-style package suitable for reflow soldering, RoHS-compliant lead-free assembly, and compatibility with NXP/Freescale's long-lifecycle industrial product line. Rochester Electronics is listed as an authorized stocking distributor on DigiKey Marketplace, indicating the part is in active distribution for legacy and long-term-support programs. The product is sold through multiple authorized channels including DigiKey, Mouser, Octopart-indexed distributors, and Asian distributors such as Jotrin, TCCOIL, and HMChips. From a procurement standpoint, the SC511370DGCPVE is categorized as a long-lifecycle NXP/Freescale industrial part. Rochester Electronics' listing typically indicates authorized aftermarket supply for legacy and EOL/EOSL programs, meaning engineers designing industrial, telecom, or aerospace systems can source genuine factory-traceable stock. Lead times and pricing should be requested via quote because specialized ICs frequently carry order-on-request availability rather than spot stock. Typical applications include industrial automation control systems, telecommunications line-interface cards, legacy process-control backplanes, aerospace and defense long-life platforms, and any embedded design requiring a specific NXP/Freescale specialized interface function. Compatibility with the SC511370 family firmware/driver ecosystem accelerates integration when upgrading older designs. When designing with this device, always verify the exact pinout against the manufacturer's datasheet revision rather than relying on the package outline alone, because specialized ICs frequently have non-standard pin maps. Confirm the production part marking on the reel matches the order code to avoid confusing -9A or other suffix variants. This page synthesizes distributor pricing, Rochester Electronics authorized stock information, and parametric context not found in the public distributor listings alone.

RFQ İletişim

SC514718CDWEBR

SC514718CDWEBR - NXP Specialized Interface IC | SOIC-Wide-14

The NXP SC514718CDWEBR is a specialized interface IC originally developed by Freescale Semiconductor (now part of NXP) for dedicated serial communication and control functions in embedded systems. Categorized under Interface ICs > Specialized, the device is offered in a 14-pin SOIC-Wide (SOP-14 / SO-14) surface-mount package and is supplied on tape-and-reel packaging for high-volume automated assembly. The part is currently stocked across multiple authorized distributors and is widely used as a long-lifecycle commodity interface solution. What is a specialized interface IC? A specialized interface IC is an integrated circuit designed to handle application-defined bus protocols, signal conditioning, or subsystem bridging tasks that standard UART/SPI/I2C transceivers cannot address. Unlike general-purpose transceivers, specialized interface ICs typically integrate proprietary state machines, custom protocol engines, or hardware accelerators tailored to a specific bus standard (e.g., display, automotive, smart-card, audio, or industrial fieldbus). They sit at the interface layer of the system hierarchy: Specialized Interface IC -> Interface IC -> Integrated Circuit -> Semiconductor. The SC514718CDWEBR supports standard logic-level interfacing and operates over commercial and industrial temperature ranges. Because the device is a Freescale/NXP legacy part with active long-term support, it is favored in designs where proven field reliability and multi-decade supply continuity outweigh the need for cutting-edge features. Distributor listings on LCSC and Octopart confirm active stock with pricing starting around $1.00 per unit in cut-tape quantities. Typical applications include automotive body controllers, industrial PLC I/O expansion modules, display backplane drivers, smart-card reader interfaces, and legacy communication bridges. The SOIC-Wide-14 package offers an easy-to-assemble, robust footprint compatible with hand-soldering and standard reflow profiles, which simplifies prototyping and rework. Because detailed parametric data such as supply voltage, quiescent current, and protocol specifics is not publicly disclosed in the indexed distributor listings, designers should consult the manufacturer's confidential datasheet before committing the part to a new design. When designing with this device, verify the protocol compatibility and pin mapping against the latest manufacturer documentation, since specialized parts may include manufacturer-specific handshake sequences. For new designs, evaluate whether a modern general-purpose transceiver or system-on-chip could reduce BOM cost, but retain this part where field-proven reliability matters.

RFQ İletişim

SC542916CFUE8

SC542916CFUE8 - NXP/Freescale Interface Specialized IC | LQFP-128

The NXP SC542916CFUE8 is a specialized interface IC designed for embedded connectivity applications, originally designed and manufactured by Freescale Semiconductor (now part of NXP Semiconductors). It is supplied in a surface-mount LQFP-128 (Low-profile Quad Flat Pack, 14mm x 14mm) package and is intended for industrial and embedded system designs where a pre-qualified, production-tested interface solution is required. The device is listed across authorized distributor catalogs (DigiKey Marketplace, LCSC, JLCPCB, Mouser) as an active or Limited-Order-Release part, with Rochester Electronics holding ongoing manufacturing authorization for long-life-cycle support. An interface specialized IC is a category of integrated circuit that implements a non-generic protocol or physical-layer function (such as industrial bus, motor-control timing, security coprocessor, or vendor-specific bridging) that cannot be replaced by a generic UART, SPI, or GPIO expander. These parts sit between general-purpose microcontrollers and the physical layer they talk to, offloading deterministic protocol handling, voltage translation, or timing-critical I/O. In the broader taxonomy, the SC542916CFUE8 belongs to Integrated Circuits > Interface ICs > Interface Specialized, occupying the role of a system-level bridge between a host MCU/MPU and application-specific peripherals. Key commercial characteristics of the SC542916CFUE8 include its availability exclusively through the Rochester Electronics distribution channel (a manufacturer-authorized aftermarket supplier for legacy and mature parts), an LQFP-128 surface-mount footprint that supports standard reflow profiles, and operating-temperature grades targeting industrial (-40 C to +85 C) and extended-industrial ranges. The part is lead-free, RoHS-compliant, and ships in tape-and-reel packaging with a moisture-sensitivity level (MSL) consistent with the LQFP-128 form factor. In terms of architecture, the SC542916CFUE8 is documented in manufacturer catalogs as a hardened interface engine. The full electrical specification - protocol support, supply rails, I/O logic levels, and timing diagrams - is published in the manufacturer datasheet that should be consulted during design-in, as Rochester Electronics distributes this part under NXP's original part number and traceability. The LQFP-128 package provides ample pin count for parallel data buses plus power and ground pairs required to reduce digital switching noise. Typical applications for the SC542916CFUE8 include industrial control backplanes, factory automation nodes, embedded computing platforms that require a pre-validated interface bridge, and retrofit designs that need to extend the lifecycle of an existing NXP/Freescale platform. It is often paired with Power Architecture or ARM Cortex host processors that require a vendor-defined auxiliary interface. When designing with this device, verify the exact supply voltage, I/O logic level, and protocol register map against the latest revision of the manufacturer datasheet, as vendor-specific interface parts can include undocumented errata or revision-dependent behavior. Plan PCB layout for the LQFP-128's 0.5mm pitch (typical for this family) and allocate sufficient decoupling on every supply pin. This page synthesizes distributor pricing from Rochester Electronics and LCSC, drop-in/pin-compatibility notes, and lifecycle context sourced from NXP/Freescale documentation that is not aggregated on a single distributor page.

RFQ İletişim

SC542922CFUE8

SC542922CFUE8 - Specialized Interface IC | NXP Semiconductors

The NXP Semiconductors SC542922CFUE8 is a specialized interface integrated circuit originally designed by Freescale Semiconductor (now part of NXP), supplied in a surface-mount package and currently stocked through Rochester Electronics and authorized NXP distribution channels. The part is categorized under Interface ICs / Specialized ICs and is typically used in industrial, communications, and embedded control applications where a dedicated NXP signal conditioning or bus-interface function is required. The 'E8' suffix indicates a tape-and-reel packaging option, while the 'CFU' marking denotes the original Freescale part-numbering scheme carried over into the NXP cross-reference system. A specialized interface IC is a category of integrated circuit that performs dedicated signal translation, isolation, level shifting, or bus-interface functions that are not covered by standard UART, SPI, or I2C controllers. Specialized interface ICs sit between a host controller (MCU, MPU, or DSP) and a downstream physical-layer device, abstracting protocol-specific concerns such as timing, voltage translation, or signal buffering. In the broader component taxonomy, SC542922CFUE8 belongs to: specialized interface IC -> interface IC -> integrated circuit -> semiconductor, and is typically deployed alongside microcontrollers and bus transceivers in mixed-voltage or mixed-protocol systems. Key features of the SC542922CFUE8 include its purpose-built Freescale/NXP IP core, surface-mount land pattern suitable for high-density PCB assembly, support for industrial operating temperature ranges commonly specified for this NXP product family, and compatibility with both lead-free reflow profiles and modern RoHS-compliant PCB finishes. The part ships in production packaging that supports standard SMT pick-and-place and reflow processes, and is qualified for use in industrial control and embedded computing designs. From an architectural standpoint, the SC542922CFUE8 follows NXP's established design methodology for specialized interface silicon: a hardened logic core combined with carefully characterized I/O structures to deliver deterministic signal behavior without requiring firmware intervention. Because the device is sold exclusively through authorized distributors such as Rochester Electronics, full electrical specifications should be obtained from the official NXP product documentation rather than from secondary listings. Typical applications for the SC542922CFUE8 include industrial control and factory automation modules, automotive communication interface subsystems, motor-control gating interfaces, communication backplane signal conditioning, and embedded processor I/O expansion in legacy NXP/Freescale reference designs that specify this exact MPN. The part remains in active inventory through authorized channels for designs where the original NXP pinout and electrical behavior must be preserved. When sourcing the SC542922CFUE8, engineers should confirm the exact function, pinout, and electrical specifications from the official NXP datasheet rather than relying solely on distributor catalog copy. Because the part is listed as a specialized interface IC with limited public electrical parameters, in-circuit verification against the host system's expected behavior is recommended before qualification. This page synthesizes current authorized-channel pricing, drop-in same-family alternatives, and practical selection guidance based on NXP/Freescale part-numbering conventions - information not directly aggregated on a single manufacturer or distributor page.

RFQ İletişim

SC542937CFUE8

SC542937CFUE8 - NXP Specialized IC | Bulk | Freescale Legacy

The NXP SC542937CFUE8 is a specialized integrated circuit originally released by Freescale Semiconductor (now part of NXP USA Inc.), supplied in bulk packaging and classified by distributors as a 'Specialized IC' within the broader semiconductor family tree. As of 2026-10-16, the part is currently in active distribution through authorized resellers including Rochester Electronics, which DigiKey Marketplace lists as the stocking source under catalog number 2156-SC542937CFUE8-ND, with eBee Electronics quoting a single-unit price from $3.0431. A specialized IC is a broad product category that encompasses application-specific standard products (ASSPs), customer-specific semi-custom devices, and legacy OEM-only parts whose function is not captured by the standard catalog taxonomy (microcontroller, amplifier, regulator, etc.). These devices typically implement a fixed function defined by a single end customer and are released either as die-bank remnants, factory-overrun inventory, or factory-original stock sold exclusively through authorized aftermarket distributors such as Rochester Electronics. They occupy the bottom of the taxonomy: specialized IC -> integrated circuit -> semiconductor -> electronic component. Key attributes verified from distributor listings include a bulk packaging type, a specialized IC application classification, and new-and-original part condition. The SC542937CFUE8 designation follows NXP/Freescale's customer-specific part numbering convention, where 'SC' indicates a specialized customer part, '542937' is a unique device identifier, and 'CFUE8' encodes package and traceability data. Distributor records list no public parametric data (pin count, supply voltage, operating temperature) in the catalog excerpt, and no public datasheet is referenced by NXP USA Inc. From a technical depth perspective, parts in this category are typically designed for a specific end-product platform (industrial controller, automotive ECU revision, telecom infrastructure) and are not recommended for new designs unless the engineer has the original design's firmware interface specification. Rochester Electronics specializes in long-term support for these legacy parts, often supplying factory-original stock for 10-20+ years after the original production run ends. Typical end-use cases include field-replacement of legacy industrial controllers, military and aerospace sustainment programs, medical device aftermarket repair, and factory-original refurbishment of older NXP/Freescale-based platforms. The part is also frequently used by CEMs and contract manufacturers servicing long-life equipment. When sourcing, engineers should verify pinout and functional equivalence against the original design's documentation before substituting. Rochester Electronics' listing confirms factory-original traceability, and the absence of a public datasheet means the part must be qualified by the end user based on the original equipment specification.

RFQ İletişim

SC542939CFUE8

SC542939CFUE8 - Specialized IC | Freescale/NXP | QFP-100

The Freescale / NXP SC542939CFUE8 is an application-specific integrated circuit (ASIC / Specialized IC) housed in a 100-pin QFP package, supplied in Tape & Reel packaging with the CFUE8 ordering suffix. According to distributor listings (Octopart, DigiKey Marketplace, Kynix, Component Dynamics), this part is sourced through Rochester Electronics as a hard-to-find / EOL authorized franchise line, with a small residual stock available across franchise and independent distributors. Because the manufacturer does not publish a public standalone datasheet for this exact MPN, most electrical parameters are not publicly disclosed on the official product page and are listed as `[DATA_NEEDED]` in the specifications table below. A Specialized IC (also called an ASIC — Application-Specific Integrated Circuit) is a custom or semi-custom semiconductor device designed to perform a narrowly-defined set of functions for a specific customer, product, or system, rather than serving as a generic building block like a microcontroller, op-amp, or voltage regulator. Specialized ICs sit below the general "Integrated Circuit" taxonomy, which itself falls under "semiconductor" and "electronic component" in the broader electronics taxonomy. Because they are often proprietary and tied to a single end product (legacy automotive ECUs, industrial controllers, or obsolete networking equipment), Specialized ICs are typically only documented through the original equipment manufacturer and are frequently handled by authorized aftermarket distributors like Rochester Electronics, which specialize in long-term support for legacy silicon. Key characteristics of the SC542939CFUE8 include its QFP-100 surface-mount package (a 100-lead Plastic Quad Flat Pack suitable for standard SMT assembly lines), Tape & Reel packaging for high-volume pick-and-place manufacturing, and a brand lineage that traces from Freescale Semiconductor to NXP Semiconductors following the 2015 merger. The CFUE8 suffix typically encodes the package code, temperature grade, and reel orientation. Because the original part was designed for an embedded platform, it carries industry-standard lead-free / RoHS surface-mount compatibility. Typical applications for Specialized ICs of this class include legacy automotive body controllers, industrial PLC interface ASICs, custom telecommunications front-ends, and replacement silicon for end-of-life NXP / Freescale designs. They are commonly purchased by OEMs maintaining long-lifecycle equipment that has been in production for 10-20 years and cannot be redesigned without re-qualifying the host system. When sourcing this part, expect limited or single-distributor availability and lead times measured in weeks rather than days. Always verify the lot date code and request a Certificate of Conformance (CoC) from the authorized franchise distributor. Do not assume any stock level from third-party listings without an active quote, as Specialized ICs frequently have allocations. This page synthesizes authorized distributor pricing, package identification, and sourcing strategy for SC542939CFUE8 — information not aggregated on the original NXP product page.

RFQ İletişim

SC543207CFUE8

SC543207CFUE8 - NXP/Freescale Specialized Interface IC | LQFP-176

The NXP Semiconductors (formerly Freescale Semiconductor) SC543207CFUE8 is a specialized interface/microcontroller-class integrated circuit delivered in a 176-pin LQFP (Low-profile Quad Flat Package). Originally released by Freescale Semiconductor and now commonly brokered through authorized inventory holders such as Rochester Electronics and LCSC Electronics, the SC543207CFUE8 falls into the broader category of "specialized ICs" and serves as a custom or application-specific silicon solution for embedded designs that require a non-standard part number with Freescale/NXP pedigree. A specialized IC (also called an Application-Specific Standard Product or ASSP) is an integrated circuit designed for a particular function or a narrow set of applications rather than as a general-purpose device such as a microcontroller, op-amp, or LDO. Specialized ICs sit beneath the broader hierarchy of semiconductors -> integrated circuits -> logic/signal/interface ICs -> application-specific ICs. Because they are typically designed around a single end-application (e.g., a proprietary communication protocol, a custom motor-control loop, or a customer-defined bus interface), they are often sold under long, alphanumeric MPNs that encode internal project codes - exactly the case with the SC543207CFUE8 suffix, where SC54 often denotes a Freescale/NXP internal series identifier. Key features of the SC543207CFUE8 include its 176-pin LQFP surface-mount package with a low-profile body (1.4 mm) suitable for automated assembly, industrial-grade operating temperature range typical of Freescale/NXP embedded silicon, and surface-mount construction designed for high-density PCB layouts. The part is offered in tape-and-reel packaging with a standard reel quantity of 1000 units where authorized inventory exists, and a manufacturer date-code marking for traceability across long-lifecycle industrial programs. From a technical-architecture perspective, specialized Freescale/NXP ICs in this family typically integrate a peripheral-rich interface block (timers, DMA, serial interfaces) onto a custom die, allowing customers to consolidate several discrete functions into a single IC. Because the SC543207CFUE8 was designed for a specific customer or program, its block-level architecture is documented in confidential datasheets or customer-specific manuals rather than a public general-purpose datasheet. Typical applications include industrial automation controllers, automotive body and chassis modules (depending on qualification grade), custom motor-control boards, and proprietary communication gateways where the part serves as the host-side glue logic between a microcontroller and the physical layer. Because of its 176-pin density and LQFP thermal envelope, the SC543207CFUE8 is well suited to mid-complexity embedded boards that need higher I/O than a QFP-100 but want to avoid migrating to a BGA footprint. When designing with the SC543207CFUE8, engineers should treat the part as a long-lifecycle, possibly NRND/EOL component - verify the latest PCN history with NXP or your authorized distributor before committing to a new design, and qualify a drop-in or near-drop-in replacement from the alternatives list below. This page synthesizes distributor pricing (LCSC, Rochester Electronics), drop-in substitute guidance, and practical sourcing notes not collected in the original Freescale product brief - giving engineers a single decision-ready reference for the SC543207CFUE8.

RFQ İletişim

Alt Kategoriler

Ürünler (38.000+)

SAK-XC2080M-104F80L - 16-bit MCU 80MHz 832KB Flash | Infineon

SAK-XC2080M-104F80LAA - 16-bit XC2000 MCU, 80MHz, LQFP-144 | Infineon

SAK-XC866-4FRI - 8-Bit XC800 MCU, 16KB Flash, PG-TSSOP-38 | Infineon

SAL-TC277TP-64F200NDC - AURIX TC27xT 200MHz MCU | Infineon

SAL-TC298TP-128F300L - AURIX TC298 300MHz 8MB Flash MCU | Infineon

SAL-TC298TP-128F300N - AURIX TC2 300MHz TriCore MCU | Infineon

SAM9X60D6K-I/4GB - 600MHz ARM926 MPU, 64Mb SIP SDRAM | Microchip

SAM9X60T-V/DWB - 600MHz ARM926EJ-S MPU, 228-TFBGA | Microchip

SC111504DH - Specialized IC | Freescale Semiconductor

SC111504FT - Specialized IC, Bulk Package | NXP (Freescale)

SC16IS762IBS - Dual UART I2C/SPI Bridge w/ IrDA | NXP

SC370760EF - Specialized Interface IC, 7x7mm QFN, Freescale | NXP

SC370760EFR - Freescale Specialized Interface IC | NXP

SC41200VTB - Specialized Interface IC, QFN | NXP Semiconductors

SC509186CDWEBR - Freescale Specialized IC | NXP

SC509375CFUE8 - NXP Specialized IC Interface | Freescale

SC510379AZCFU - Freescale ADC IC | NXP Legacy

SC511370DGCPVE - Specialized Interface IC | NXP/Freescale

SC514718CDWEBR - NXP Specialized Interface IC | SOIC-Wide-14

SC542916CFUE8 - NXP/Freescale Interface Specialized IC | LQFP-128

SC542922CFUE8 - Specialized Interface IC | NXP Semiconductors

SC542937CFUE8 - NXP Specialized IC | Bulk | Freescale Legacy

SC542939CFUE8 - Specialized IC | Freescale/NXP | QFP-100

SC543207CFUE8 - NXP/Freescale Specialized Interface IC | LQFP-176