Ürünler (44.000+)

XC3S5000-4FG676I - 5M-Gate Spartan-3 FPGA | Xilinx
XC3S5000-4FG676I

XC3S5000-4FG676I - 5M-Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S5000-4FG676I is a Spartan-3 field-programmable gate array with 5 million system gates, 74,880 logic cells, up to 489 I/O, and a 630 MHz maximum clock in a 676-pin FBGA package. The -4 speed grade targets demanding FPGA designs, while the industrial-temperature I suffix supports junction temperatures from -40°C to 100°C. Manufactured using 90 nm SRAM FPGA technology, the device combines configurable logic, dedicated hardware resources, programmable I/O, and embedded block RAM in one package. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy: FPGA → field-programmable gate array → programmable logic device → semiconductor. Instead of implementing a fixed function with hardwired gates, the Spartan-3 architecture combines configurable logic blocks with programmable interconnect. This makes the device suitable for parallel processing, protocol bridging, control logic, signal acquisition, and embedded systems whose algorithms may evolve after design release. The XC3S5000-4FG676I provides 5 million system gates and 74,880 logic cells, with up to 489 I/O available through the 676-ball package. Its 630 MHz maximum clock supports demanding timing designs, while the 90 nm fabrication process and 1.2 V supply characterize this generation of programmable logic. The broad I/O count allows systems to connect substantial external memory, data converters, communications transceivers, and industrial interfaces without an external interface controller. Spartan-3 devices use configurable logic blocks, programmable routing resources, dedicated multipliers, block RAM, digital clock management, and programmable I/O blocks. The -4 designation identifies the performance grade, FG676 identifies the package configuration, and I identifies the industrial temperature option. Exact pin functions, differential-I/O capabilities, supported standards, and configuration requirements must be checked against the device pinout and the AMD/Xilinx DS099 family documentation before layout or firmware implementation. Typical applications include industrial control, telecommunications line-card and interface logic, high-speed data acquisition, digital signal processing, embedded video processing, storage controllers, and test-and-measurement equipment. The large logic capacity allows parallel datapaths and multi-channel processing, while the high I/O count supports memory-heavy and multi-interface designs. The 630 MHz ceiling provides substantial timing headroom for clocked pipelines, provided timing constraints, clocking, and physical implementation meet the design targets. A critical design consideration is that FPGA migration depends on exact package balls, configuration pins, supply sequencing, bank voltages, and supported I/O standards. A device with the same gate count is not automatically interchangeable unless its package ballout and electrical constraints are verified. Use the AMD/Xilinx DS099 Spartan-3 FPGA Family data sheet for the authoritative pin and parameter definitions, and validate the selected board configuration with the final bitstream and timing analysis. This product page consolidates the verified device identity, core resource figures, package information, design constraints, application guidance, and a validated same-package alternative candidate. It also distinguishes documented parameters from attributes that still require device-specific review, helping engineers identify whether the XC3S5000-4FG676I fits a legacy design before committing to sourcing or board rework.

RFQ İletişim
XC3S5000-4FG900C - 5M Gate Spartan-3 FPGA | Xilinx
XC3S5000-4FG900C

XC3S5000-4FG900C - 5M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S5000-4FG900C is a Spartan-3 field-programmable gate array with 5,000,000 system gates, 74,880 logic cells, 633 user I/Os, and a 630 MHz maximum clock rating in a 900-ball FBGA package. The device operates from a 1.2 V core supply and uses 90 nm fabrication technology. An FPGA is a semiconductor whose internal logic, routing, and I/O blocks are configured after manufacture. The FPGA hierarchy progresses from configurable logic blocks and programmable interconnect to a field-programmable gate array and then to a digital integrated circuit. This allows one physical device to implement digital control logic, interface protocols, signal processing, or embedded systems that would otherwise require several application-specific ICs. The Spartan-3 architecture supports a large fabric of 74,880 logic cells and 5 million system gates, making it suitable for designs with substantial parallel logic. Its 633 user I/Os provide connections to external memories, clocks, control signals, communications links, and mixed-signal systems. The -4 speed grade and commercial-temperature designation identify the device's performance and operating classifications, while the 900-ball FBGA supports dense PCB routing in high-pin-count systems. The XC3S5000 belongs to the Spartan-3 family, whose architecture uses configurable logic blocks, programmable routing, block RAM, dedicated multipliers, and programmable input/output resources. Unlike a fixed-function ASIC or mask-programmed device, the same FPGA can be reused for different logic functions when its configuration bitstream changes. The 90 nm process and 1.2 V core voltage position the device as a high-density, cost-oriented FPGA platform. Typical applications include industrial control systems, communications infrastructure, instrumentation, embedded processors, video and image processing, test equipment, and interface consolidation. Its 633 available I/Os are particularly useful when a design must bridge multiple external buses, memory devices, and control peripherals without using several discrete logic devices. Before layout, verify the exact 900-ball land pattern, power requirements, decoupling recommendations, configuration interface, and supported I/O standards in the manufacturer datasheet. Use the pin-definition tables and package drawings as the authority for PCB implementation, and include thermal and power-budget analysis in the final system design. This page combines the core Spartan-3 electrical and packaging characteristics with application guidance, compatibility-focused alternatives, comparison data, and practical design notes. It is intended to help engineers evaluate capacity, pin requirements, package implementation, and family-level replacement options before beginning a new FPGA design.

RFQ İletişim
XC3S5000-4FG900I - 5M Gate Spartan-3 FPGA | AMD
XC3S5000-4FG900I

XC3S5000-4FG900I - 5M Gate Spartan-3 FPGA | AMD

AMD Xilinx XC3S5000-4FG900I is a Spartan-3 field-programmable gate array with 5,000,000 system gates, 74,880 logic cells, 633 I/O, and up to 630 MHz performance in a 900-ball FBGA package. A field-programmable gate array, or FPGA, is a programmable digital logic device in which configurable logic blocks, programmable input/output resources, and internal interconnect are arranged to implement application-specific digital functions. An FPGA belongs to the broader semiconductor hierarchy of programmable logic devices and is commonly selected when parallel processing, flexible hardware updates, or dedicated interface logic justify a higher pin count than a small microcontroller or CPLD can provide. The XC3S5000-4FG900I represents the highest-density device in the Spartan-3 family. Its 5 million system gates and 74,880 logic cells provide substantial capacity for parallel data processing, control logic, protocol bridges, and embedded systems. The device uses 90 nm fabrication technology and a 1.2 V core supply. Its -4 designation identifies a specific speed grade, while the 900-ball package supports a large interface count and extensive I/O capability. The 633-I/O configuration makes this FPGA suitable for systems that need multiple high-speed interfaces, wide parallel buses, or substantial external connectivity. Compared with a discrete fixed-function ASIC, the Spartan-3 architecture permits logic changes through configuration rather than a silicon respin. The tradeoff is that configuration storage, tool support, power consumption, and PCB complexity must be considered in addition to raw logic capacity. Typical uses include communications equipment, industrial control, video and image processing, test equipment, embedded storage systems, and high-volume prototype or production logic platforms. Its large 900-ball FBGA footprint is appropriate for multilayer PCB designs with dense routing, careful power delivery, and controlled thermal performance. When planning a replacement or new design, verify the complete pinout, configuration interface, supported I/O standards, clock requirements, and core voltage sequencing against the manufacturer datasheet. Do not assume that another 900-ball Spartan-3 device is interchangeable solely because it uses a similar package; device density, speed grade, temperature grade, and pin functions must all be checked. This product record combines the identified Spartan-3 electrical and packaging characteristics with engineering-focused comparison information, drop-in replacement constraints, and practical PCB considerations. It helps distinguish a true same-footprint replacement from a merely similar FPGA that would require design changes.

RFQ İletişim
XC3S5000-5FG676C - 5M Gate Spartan-3 FPGA | AMD/Xilinx
XC3S5000-5FG676C

XC3S5000-5FG676C - 5M Gate Spartan-3 FPGA | AMD/Xilinx

The AMD/Xilinx XC3S5000-5FG676C is a Spartan-3 field-programmable gate array with 5 million system gates, 74,880 logic cells, and a maximum stated operating frequency of 725 MHz. The device uses 90 nm process technology, operates from a 1.2 V core supply, and is packaged in a 676-pin fine-pitch ball grid array. The commercial-grade C suffix corresponds to an operating-temperature range of 0°C to 85°C according to the published product information. A field-programmable gate array, or FPGA, is a programmable semiconductor containing configurable logic blocks, programmable interconnect, input/output resources, and embedded memory. FPGAs belong to the programmable-logic hierarchy, combining digital design flexibility with high-density parallel processing. The Spartan-3 family targets cost-sensitive embedded systems where designers require substantial logic capacity, multiple I/O, and field-updatable configurations without changing the assembled PCB. The XC3S5000-5FG676C provides 74,880 logic cells, 5 million system gates, and a 725 MHz stated maximum frequency. Its 676-ball package supports a high pin count compared with smaller FPGA packages, making it suitable for designs requiring extensive parallel interfaces. The 90 nm fabrication process and 1.2 V core supply are important for system planning because power dissipation, configuration requirements, and external I/O voltage levels must be evaluated as a complete power architecture. Its programmable logic can implement control logic, serial and parallel interfaces, protocol bridges, state machines, signal conditioning, and embedded datapaths. Designs can combine multiple fixed-function functions in one device, reducing component count and allowing configuration changes during product maintenance. Because an FPGA is programmed after fabrication, its internal architecture supports field updates, debugging, and product differentiation without physically replacing the IC. Typical uses include industrial automation, communications equipment, test and measurement systems, embedded control, video processing, and high-density interface aggregation. The large 676-ball package is especially relevant when a design requires many I/O sites or a substantial connector count. A smaller Spartan-3 device may be preferable when the system does not require the XC3S5000's 74,880 logic cells or high pin count. When designing a board around this FPGA, use the manufacturer datasheet and package documentation to verify every ball assignment, configuration interface, power rail, decoupling requirement, and I/O standard. The 1.2 V core supply and 725 MHz frequency figure describe the device itself, but actual clocking, performance, and power depend on the selected I/O standards, logic utilization, speed grade, configuration method, PCB construction, and thermal design. This page combines the published XC3S5000-5FG676C specifications, sourcing information, application guidance, and verified same-family alternatives into an engineering-focused reference for FPGA designers and component selectors.

RFQ İletişim
XC3S5000-5FG900C - 5M Gate Spartan-3 FPGA | Xilinx
XC3S5000-5FG900C

XC3S5000-5FG900C - 5M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S5000-5FG900C is a 5 million-system-gate Spartan-3 field-programmable gate array with 74,880 logic cells, a maximum frequency of 725 MHz, and a 1.2 V core supply in a 900-pin FG900 FBGA package. It is designed for cost-sensitive, high-volume programmable-logic systems that require substantial parallel processing capability in a surface-mount package. A field-programmable gate array is a digital semiconductor whose configurable logic blocks, programmable interconnects, and input/output resources are configured after manufacture. The FPGA category sits within programmable logic, alongside complex programmable logic devices, and provides hardware-level parallelism without the recurring silicon cost of a fully custom application-specific integrated circuit. The Spartan-3 architecture combines configurable logic, dedicated block RAM, dedicated multipliers, and programmable I/O within one device. The XC3S5000-5FG900C provides 5 million system gates, 74,880 logic cells, and a maximum frequency of 725 MHz. Its -5 designation identifies the performance grade, while the FG900 package designation identifies the 900-ball square FBGA configuration. A 1.2 V core supply and 90 nm process technology are also associated with this device, allowing it to target high-density logic, embedded processing, and interface-control applications where an FPGA implementation is more flexible than a fixed-function ASIC. The programmable resources let one physical design support multiple product variations through configuration rather than multiple fixed masks. Parallel logic can accelerate datapaths, protocol handling, packet filtering, and control functions that would otherwise require many discrete components. The large 900-pin package exposes substantial I/O and dedicated-function connectivity, but it also requires careful ball-grid layout planning, multilayer routing, and thermal-aware assembly practices. Typical applications include broadband access equipment, home networking, industrial control, communications infrastructure, and embedded control systems. The Spartan-3 device is appropriate when design flexibility, parallel processing, and field reconfiguration justify the complexity of a high-pin-count BGA package. It is also useful in legacy systems that depend on the established Spartan-3 toolchain and device ecosystem. PCB implementation should prioritize power integrity because the device uses a 1.2 V core and numerous high-speed I/O rails. Follow the manufacturer's recommended decoupling, ball assignments, and layer-stack guidance rather than improvising a high-density escape-routing strategy. Component placement should also account for the thermal characteristics of a large FBGA and the heat generated by sustained switching activity. This product overview combines the device's core architectural identifiers with practical guidance for replacement assessment, package planning, sourcing, and application selection. The comparison and design notes focus on engineering decisions that are not apparent from a catalog listing alone.

RFQ İletişim
XC3S500E-4FG320C - 500K Spartan-3E FPGA | AMD Xilinx
XC3S500E-4FG320C

XC3S500E-4FG320C - 500K Spartan-3E FPGA | AMD Xilinx

The AMD Xilinx XC3S500E-4FG320C is a Spartan-3E field-programmable gate array with 500,000 system gates, 10,476 logic cells, 368,640 RAM bits, and 232 user I/O in a 320-BGA package. It uses a 1.14 V to 1.26 V supply and supports a 0°C to 85°C operating range. A field-programmable gate array is a semiconductor device whose digital logic and interconnect can be configured after manufacture. The XC3S500E belongs to the Spartan-3E FPGA hierarchy, combining configurable logic blocks, block RAM, programmable I/O, and clocking resources in one integrated circuit. This places it between fixed-function logic devices and larger application-specific programmable arrays. The device provides 192 logic blocks, 368,640 bits of RAM, and 232 user I/O, making it suitable for parallel data processing, control logic, interface bridging, and embedded signal-processing designs. Its 320-BGA package provides a high pin count for systems requiring numerous digital connections while using surface-mount assembly. The “500E” designation identifies the high-density member of the Spartan-3E family, while the “-4” portion identifies its performance grade. The “FG320” suffix identifies the 320-BGA package configuration, and the final “C” identifies the commercial temperature grade. These ordering-code fields determine device selection without changing the fundamental FPGA architecture. Typical uses include industrial automation, video and image processing, communications equipment, storage controllers, instrumentation, and embedded control systems. The combination of 10,476 logic cells, 368,640 RAM bits, and 232 I/O allows multiple parallel processing paths and external interfaces to be implemented in one configurable device. PCB design should account for the large BGA footprint, high pin count, and multilayer-routing requirements. Follow the AMD Spartan-3E package pinout and PCB design guidance, provide the specified supply rails, decouple each supply group, and validate high-speed signal integrity before production release. This product record combines the exact ordering information, package details, resource counts, and device constraints with practical selection guidance, packaging considerations, and same-footprint Spartan-3E alternatives for engineering review.

RFQ İletişim
XC3S500E-4FG320I - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4FG320I

XC3S500E-4FG320I - 500K Gate Spartan-3E FPGA | AMD

The AMD XC3S500E-4FG320I is a Spartan-3E field-programmable gate array built for cost-sensitive digital systems, providing 500,000 equivalent system gates, 10,476 configurable logic cells, 368,640 RAM bits, and 232 user I/O in a 320-pin FBGA package. The -4 speed grade supports demanding control, interface, and signal-processing designs, while the 90 nm fabrication process targets high-volume consumer and embedded applications. An FPGA is a programmable digital semiconductor whose internal logic, interconnect, memory, and I/O blocks are configured after manufacture. Within the product hierarchy, the XC3S500E-4FG320I is a Spartan-3E FPGA, a member of the Spartan-3E family of programmable logic devices. Its advantage over a fixed-function mask-programmed ASIC is field programmability, allowing design revisions, shorter development cycles, and product differentiation without redesigning custom silicon. Key resources include 1,164 configurable logic blocks, 10,476 logic cells, 368,640 bits of block RAM, and 232 user I/O. The device is identified as operating with a 1.2 V supply and reaching 572 MHz under the stated operating conditions. Its 320-FBGA, 19 x 19 mm surface-mount package provides a high pin count for designs requiring substantial external connectivity. The -4 designation identifies the device performance grade, while the I suffix identifies the industrial-temperature configuration. The Spartan-3E architecture combines programmable logic with dedicated block RAM and versatile I/O resources, making it suitable for embedded control, data acquisition, protocol bridging, image processing, and general-purpose digital acceleration. Compared with mask-programmed ASICs, it permits firmware-like bitstream updates in the field. Compared with larger programmable devices, it maintains a more compact resource profile and a package option suited to I/O-intensive but cost-controlled systems. Typical uses include industrial control panels, network-interface equipment, video timing and scaler logic, consumer peripherals, and embedded instrumentation. A design may use the FPGA for parallel interface bridging, protocol conversion, state-machine control, or pre-processing before a processor handles higher-level software. The 232 user I/O and 368,640 RAM bits permit simultaneous external connections and moderate data buffering without relying on external memory for every function. PCB implementation requires careful BGA escape routing, decoupling, power integrity, and thermal management. Follow the AMD Spartan-3E Family Data Sheet DS312 for the exact ball map, pin electrical characteristics, configuration requirements, and recommended power architecture. Before substituting any equivalent, verify ball assignments, supported I/O standards, clock resources, configuration interface behavior, and the voltage requirements of the assembled board. This page combines device resources, verified source links, package characteristics, application guidance, and drop-in comparison criteria for engineers evaluating the XC3S500E-4FG320I. The comparison information also distinguishes true same-footprint device options from larger Spartan-3E packages that would require a board redesign and therefore are not treated as drop-in replacements.

RFQ İletişim
XC3S500E-4FT256I - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4FT256I

XC3S500E-4FT256I - 500K Gate Spartan-3E FPGA | AMD

The AMD/Xilinx XC3S500E-4FT256I is a Spartan-3E field-programmable gate array with 500,000 equivalent system gates, 10,476 logic cells, 1,164 configurable logic blocks, and 368,640 bits of block RAM. The device provides 190 programmable I/O pins and operates from a 1.2 V core supply in a 256-ball FTBGA package measuring 17 mm by 17 mm. Its -4 speed grade supports clocking up to 572 MHz, while the industrial suffix specifies operation from 0°C to 85°C. An FPGA is a semiconductor whose internal digital logic, interconnect, memory, and I/O can be configured after manufacture. The Spartan-3E family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, dedicated multipliers, and programmable input/output resources on one integrated circuit. This makes the XC3S500E suitable for designs requiring parallel data processing, control logic, protocol bridging, or high-speed interface termination. Principal resources include 10,476 logic cells distributed across 1,164 CLBs, together with 368,640 bits of onboard block RAM. The device offers 190 programmable I/O pins for external memory, communications links, control signals, and data buses. Its 90 nm fabrication technology and 1.2 V core supply define the core electrical characteristics, while the 256-FTBGA package supports compact, high-density surface-mount layouts. The Spartan-3E architecture combines programmable logic with dedicated block RAM and arithmetic resources. This allows designers to implement parallel datapaths without relying exclusively on external memory. The 572 MHz maximum clock figure applies to suitable device and design conditions, so final timing closure must account for the selected speed grade, logic mapping, routing, I/O standards, and board-level constraints. Typical uses include industrial control, communications equipment, instrumentation, video processing, embedded systems, and legacy processor or peripheral replacement. A design can place the FPGA between sensors or processors and external converters, or use its configurable logic to implement protocol conversion, data acquisition, timing, and control functions within one package. PCB design should follow the AMD package pinout, power-decoupling guidance, and ball-grid escape routing rules in DS312. Differential pairs and other sensitive signals require controlled impedance, while ground and supply distribution must be planned carefully for simultaneous switching activity. Toolchain, bitstream, and board-level validation are essential because legacy device migration can depend on software version and timing constraints. This product page combines device resource data, package characteristics, lifecycle information, replacement guidance, and practical PCB-design considerations to support faster engineering evaluation. It also distinguishes genuine same-footprint alternatives from package or resource variants that require redesign rather than simple replacement.

RFQ İletişim
XC3S500E-4PQ208I - Spartan-3E FPGA 208-BFQFP | AMD
XC3S500E-4PQ208I

XC3S500E-4PQ208I - Spartan-3E FPGA 208-BFQFP | AMD

The AMD XC3S500E-4PQ208I is a Spartan-3E field-programmable gate array in a 208-BFQFP package. It provides 500,000 system gates, 10,476 configurable logic cells, 158 user I/O, and a 4 speed grade. The industrial-temperature suffix I supports operation from 0°C to 85°C. These characteristics make the device suitable for cost-sensitive embedded control, communications, industrial automation, and consumer-equipment designs requiring programmable logic and substantial parallel I/O. A field-programmable gate array is a semiconductor whose digital logic and connectivity are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Spartan-3E family combines configurable logic blocks, programmable I/O, block RAM, dedicated arithmetic resources, and clock-management functions on one device. This integration allows a board to implement control logic, protocol handling, data acquisition, and peripheral interfaces without relying on a collection of discrete logic ICs. The XC3S500E-4PQ208I includes 10,476 configurable logic cells and 158 user I/O, providing high connectivity for parallel buses, industrial interfaces, and embedded processor peripherals. Its 4 speed grade is intended for designs operating below the 5 speed-grade ceiling. The 208-pin surface-mount package supports higher I/O density than the smaller 100-pin and 132-pin alternatives in the same family, while the 28 mm by 28 mm footprint requires careful PCB routing and thermal analysis. Spartan-3E devices use configurable logic blocks and distributed or block memory resources to implement digital systems whose requirements may evolve after hardware design begins. The XC3S500E family also supports dedicated multipliers, block RAM, and clock functions for designs requiring arithmetic, local storage, or multiple clock domains. Configuration, pin constraints, timing, and power behavior should be evaluated with the current AMD FPGA design tools before schematic sign-off. Typical applications include industrial automation controllers, telecommunications line-card logic, data-acquisition systems, embedded control platforms, and instrumentation. In these systems, the high I/O count can connect external memories, transceivers, sensors, and parallel processors, while programmable logic allows firmware-independent field updates. Designers should confirm timing closure for the intended clock frequency and verify that the selected I/O standards suit each interface. PCB implementation requires a stable multilayer structure, continuous ground-plane coverage, and careful decoupling around every supply pin. The 208-BFQFP lead pitch requires a qualified assembly process, and exposed programming and configuration signals must be routed away from high-speed nodes. A finished design should also include a defined startup or configuration strategy so the FPGA operates deterministically after power application. This page combines package, logic-resource, temperature, and application guidance with practical drop-in replacement analysis. It also organizes pin, procurement, and selection questions around the device's industrial Spartan-3E positioning, helping engineers compare footprint compatibility, temperature grade, speed grade, and lifecycle needs before releasing a PCB.

RFQ İletişim
XC3S500E-4PQG208C - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4PQG208C

XC3S500E-4PQG208C - 500K Gate Spartan-3E FPGA | AMD

The AMD XC3S500E-4PQG208C is a Spartan-3E field-programmable gate array with 500,000 equivalent system gates, 10,476 logic cells, 1,164 configurable logic blocks, and 158 inputs in a 208-pin PQFP package. The device uses a 1.2 V supply and is identified by the provided data as supporting up to 572 MHz. It is a surface-mount programmable logic device for embedded control, signal processing, interface bridging, and parallel data acquisition systems. A field-programmable gate array, or FPGA, is a programmable digital logic device whose configurable logic and interconnect resources can be programmed after manufacture. FPGAs sit above fixed-function logic devices and programmable gate arrays in the digital-semiconductor hierarchy: a design can use programmable logic to implement counters, state machines, ALUs, control logic, and interface circuits without requiring a custom ASIC. Spartan-3E devices provide a practical balance between logic capacity, device cost, and design flexibility for embedded systems. The verified specifications identify the XC3S500E-4PQG208C as a 500K-gate Spartan-3E FPGA with 10,476 logic cells, 1,164 CLBs, 158 inputs, and a maximum clock frequency of 572 MHz. The 208-PQFP package provides a leaded, inspectable footprint for conventional surface-mount assembly. The C suffix and the verified distributor listings identify the exact commercial ordering code; the supplied sources do not provide a complete temperature-grade or lifecycle classification. This FPGA is suitable for control and sequencing logic where multiple parallel channels, counters, timers, and state machines must be implemented in one device. Its logic capacity can also support moderate data paths and protocol interfaces. The 572 MHz maximum clock figure should be treated as a device-level headline value; actual achievable clock rates depend on the selected I/O standard, timing constraints, routing, logic depth, and the external memory or transceiver interface. Typical applications include industrial automation, test-and-measurement front ends, communications adapters, embedded control systems, and signal-processing support. The package is particularly useful where a leaded package is preferred over a fine-pitch BGA and where the design requires a moderate number of I/O connections. Designers should verify board pinout, configuration requirements, power sequencing, I/O standards, and signal-integrity margins against the manufacturer datasheet before layout release. The principal design consideration is package-related routing and signal integrity. A 208-pin PQFP requires adequate copper clearances and controlled escape routing, especially for high-speed clock and interface nets. Configuration storage, bank supply voltages, decoupling, and pinout details must be implemented exactly as specified in the AMD Spartan-3E documentation. This page combines verified distributor and AMD documentation references with application guidance, lifecycle caveats, package-specific design notes, and explicitly qualified replacement analysis for engineers evaluating the XC3S500E-4PQG208C.

RFQ İletişim
XC3S50A-4FT256C - 50K Spartan-3A FPGA | AMD | 256-FTBGA
XC3S50A-4FT256C

XC3S50A-4FT256C - 50K Spartan-3A FPGA | AMD | 256-FTBGA

AMD XC3S50A-4FT256C is a Spartan-3A field-programmable gate array with approximately 50,000 logic gates, 144 user I/O, and a 256-pin fine-pitch ball grid array package. The device operates from a 1.14 V to 1.26 V core-voltage range and is identified as a last-time-buy product. Its 4 speed grade supports cost-sensitive programmable logic applications where a compact, nonvolatile FPGA implementation is preferable to a fixed-function logic device. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and input/output functions are configured after manufacture. Within the FPGA hierarchy, the Spartan-3A family belongs to the low-to-medium-density programmable-logic segment. The XC3S50A combines approximately 50,000 gates, 144 I/O, and a 256-ball FTBGA package in a surface-mount device suitable for compact embedded control, interface, data-capture, and industrial automation equipment. The available specifications identify 144 user I/O, a 1.14 V to 1.26 V core-voltage range, and an approximate gate count of 50,000. These resources support parallel control logic, protocol interfaces, glue logic, and modest embedded processing systems. The C suffix identifies the commercial product variant, while the -4 portion denotes the device speed grade. Detailed RAM, clock, configuration, and I/O standards were not present in the supplied verified data and must be confirmed from the AMD Spartan-3A family datasheet before design release. The XC3S50A-4FT256C is supplied in tray packaging according to the available product listing. Its 256-pin fine-pitch BGA format creates a compact land pattern but requires careful PCB layout, via-in-pad or via-under-bump considerations, and assembly processes capable of handling closely spaced balls. Signal-integrity, power-delivery, thermal, and exact package-dimension guidance should be taken directly from the AMD DS529 family document and the device pinout information. Typical uses include industrial automation controllers, instrumentation, embedded communications, consumer interfaces, and cost-sensitive control systems. Because the part is listed as last time buy, new production should include lifecycle review, planned end-of-life inventory, and a qualified second source. Lead time is listed as 12 weeks, making procurement planning essential for designs that cannot tolerate a supply interruption. Design engineers should verify the exact pinout, supported I/O standards, configuration interface, memory resources, and power requirements in the AMD Spartan-3A family datasheet before layout release. This page consolidates the supplied distributor data, lifecycle information, pricing references, drop-in family variants, and practical implementation considerations to support engineering selection.

RFQ İletişim
XC3S50A-4FT256I - Spartan-3A 256-LBGA FPGA | AMD
XC3S50A-4FT256I

XC3S50A-4FT256I - Spartan-3A 256-LBGA FPGA | AMD

The AMD XC3S50A-4FT256I is a Spartan-3A field-programmable gate array in a 256-ball, square, surface-mount LBGA package. The -4 suffix identifies the device speed grade, the FT code identifies the 256-ball package configuration, and the final I indicates industrial-temperature grading. Verified distributor information identifies the device as an FPGA with 144 I/O, 55,296 gates, and 1,584 logic cells. It is positioned for designs that require programmable digital logic, parallel interfaces, embedded control, and compact system integration. A field-programmable gate array is a semiconductor whose digital configuration is defined after fabrication. The FPGA category sits above programmable logic devices and below configurable digital system components, combining configurable logic blocks, programmable I/O, and dedicated resources in one integrated circuit. This hierarchy allows engineers to implement control, communications, data acquisition, signal processing, and interface logic on hardware that can be revised without changing the printed circuit board. The Spartan-3A family provides configurable logic blocks containing lookup tables and flip-flops, along with programmable general-purpose I/O and dedicated multiplier and accumulator resources in DSP48A slices. Those DSP48A resources are useful for multiply-accumulate operations, while the 144-I/O configuration supports systems with substantial external bus and control connectivity. The exact switching, timing, configuration-memory, and electrical limits must be confirmed in the AMD DS529 Spartan-3A family data sheet before a design is released. The XC3S50A-4FT256I is differentiated by its combination of the -4 performance grade, industrial-temperature grading, and 256-ball LBGA package. The industrial marking makes it more appropriate for temperature-controlled factory, telecom, and test equipment than a commercial-temperature alternative. The compact 17 x 17 mm package also supports dense board layouts, although its 256-ball geometry requires careful inspection and assembly planning. Typical applications include industrial automation, telecommunications, embedded instrumentation, data-acquisition systems, and compact control platforms. In these systems, the FPGA can consolidate parallel interface logic, perform protocol conversion, coordinate control sequencing, or implement DSP pipelines. Pairing it with an external data converter, communications transceiver, and nonvolatile configuration storage can produce a complete embedded processing subsystem. Designers should treat the 256-LBGA footprint as a demanding assembly constraint. The board should use an appropriate ball pitch and copper-compatible surface finish, while assembly planning must account for inspection, cleaning, placement, and solder-joint verification. Power rails, configuration sequencing, decoupling, clocking, and I/O standards should be designed from the complete AMD datasheet rather than inferred solely from the ordering code. This page combines verified distributor specifications, package data, and the AMD DS529 family reference with practical considerations that are not visible in a basic distributor listing. It also separates documented facts from parameters that still require schematic-level and board-level verification, helping engineers evaluate the XC3S50A-4FT256I for industrial FPGA designs without relying on assumptions.

RFQ İletişim
XC3S50A-4FTG256C - 50K Spartan-3A FPGA | AMD
XC3S50A-4FTG256C

XC3S50A-4FTG256C - 50K Spartan-3A FPGA | AMD

The AMD XC3S50A-4FTG256C is a Spartan-3A field-programmable gate array with 50K logic gates, 55,296 logic cells, 1,584 configurable slices, and 144 user I/O in a 256-ball FTBGA package. It is manufactured on 90 nm CMOS technology, operates from a 1.2 V core supply, and is specified at a nominal 667 MHz performance point. The -4 designation identifies its speed grade, while the final C suffix identifies the commercial temperature grade. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O functions are configured after fabrication. An FPGA belongs to the programmable-logic device hierarchy, alongside CPLDs, and provides parallel hardware implementation of control, signal-processing, communications, and data-acquisition functions. The Spartan-3A family combines moderate logic density with a large I/O count in a cost-conscious architecture for embedded control and industrial equipment. The XC3S50A-4FTG256C provides 144 user I/O, giving it substantial connectivity for parallel buses, control signals, and external interfaces. Its 1,584 slices divide the 55,296 logic cells into parallel programmable resources for combinational and sequential logic. The 50K-gate description provides a relative scale for system architects, while the 667 MHz figure establishes the device's timing-performance class for clocked designs. The 256-ball FTBGA package supports compact PCB integration but requires careful escape routing, via-in-pad considerations, and thermal design. A 90 nm fabrication process and 1.2 V core supply place this device in an established low-power FPGA generation. Designers should use the AMD DS529 family data sheet for package dimensions, pin definitions, configuration requirements, bank voltage rules, and supported I/O standards. Typical uses include industrial control systems, instrument interfaces, digital signal-processing front ends, communications equipment, and embedded test systems. Its combination of 144 I/O and 1,584 slices is useful when an application needs many parallel external connections or moderate logic parallelism rather than the density of a larger FPGA. Configuration storage, clocking, power sequencing, and JTAG programming remain essential board-level functions. When replacing another device, verify the exact BGA ball map, power rails, configuration interface, I/O voltage standards, and speed grade rather than relying only on the logic-cell count. The C-grade suffix and -4 speed designation affect system timing and environmental requirements. Use the manufacturer's package pinout and configuration guidance to validate every board-level connection before production release. This product record combines the verified Spartan-3A device characteristics with package-aware replacement guidance, commercial sourcing instructions, and practical design notes for 256-ball FTBGA implementation. It is intended to accelerate initial component screening while preserving the verification work required for production-quality FPGA designs.

RFQ İletişim
XC3S50A-4TQ144C - 50K Spartan-3A FPGA | AMD/Xilinx
XC3S50A-4TQ144C

XC3S50A-4TQ144C - 50K Spartan-3A FPGA | AMD/Xilinx

The AMD/Xilinx XC3S50A-4TQ144C is a Spartan-3A field-programmable gate array with 55,296 system gates, 1,584 logic elements, 108 user I/Os, and a 144-pin TQFP package. Designed for high-volume, cost-sensitive commercial applications, the device uses a 90 nm process technology and a 1.2 V core. The “-4” grade identifies its performance speed grade, while the “C” suffix denotes the commercial temperature option. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O resources are configured after manufacture. An FPGA sits within the programmable-logic hierarchy above simple fixed logic devices and below software-configured processors. Unlike a mask-programmable ASIC, an FPGA allows design revisions, field updates, and logic changes without fabricating a new custom chip. The XC3S50A-4TQ144C combines a moderate logic capacity with 108 user I/Os in a surface-mount TQFP package. The primary headline features are 55,296 system gates, 1,584 logic elements, and 108 user I/Os. Search results also describe the device as a 50,000-system-gate Spartan-3A FPGA. Its 144-pin TQFP package provides 108 user I/Os for external interfaces and board-level connections, making this device suitable for compact embedded systems requiring substantial parallel connectivity. The Spartan-3A architecture combines configurable logic, programmable I/O, dedicated memory resources, and clock-management resources within a single programmable device. The 90 nm fabrication process supports a compact and cost-sensitive implementation compared with larger, more complex programmable-logic devices. The device’s combination of moderate gate capacity and high I/O availability allows designers to consolidate control, interface, and state-machine functions without using a discrete combination of multiple smaller devices. Typical applications include industrial control, instrumentation, communications equipment, consumer peripherals, embedded control, and general-purpose I/O expansion. The 108 user I/Os are especially useful for systems that need parallel data acquisition, digital control, display interfaces, or external memory connections. In these designs, the FPGA can implement parallel processing and control logic while its configuration system preserves update flexibility. A primary design consideration is supply voltage and I/O compatibility. The available source material specifies a 1.2 V core but does not provide the complete recommended operating ranges, I/O standard options, configuration memory requirements, or power-loss configuration behavior. These values must therefore be confirmed against the complete manufacturer datasheet before schematic capture, pin assignment, and PCB layout are released. This product data consolidates verified distributor specifications, package information, pricing, availability, and same-family replacement options with practical selection guidance. It adds value beyond a basic distributor listing by separating confirmed parameters from missing technical data and explaining where each Spartan-3A option is appropriate.

RFQ İletişim
XC3S50A-4TQ144I - 50K Spartan-3A FPGA | AMD/Xilinx
XC3S50A-4TQ144I

XC3S50A-4TQ144I - 50K Spartan-3A FPGA | AMD/Xilinx

The AMD/Xilinx XC3S50A-4TQ144I is a Spartan-3A field-programmable gate array with 50,000 system gates, 1,584 configurable logic cells, 55,296 RAM bits, and 108 I/O in a 144-LQFP package. It operates from a 1.14 V to 1.26 V core supply and is specified for an industrial junction-temperature range of -40°C to 100°C. The -4 suffix identifies the device speed grade, while the TQ144 package designation identifies the surface-mount 144-lead package used by the XC3S50A family. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior can be programmed after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and ultimately a semiconductor. Compared with a fixed-function application-specific integrated circuit, an FPGA allows parallel hardware functions, interface adaptation, and design revisions without changing the PCB. The Spartan-3A family is positioned for compact, cost-sensitive designs requiring moderate logic density and extensive user I/O. The Spartan-3A architecture provides five principal programmable functional elements, including configurable logic blocks, programmable interconnect, dedicated block RAM, input/output blocks, and configuration resources. Each configurable logic block contains four-input lookup tables and flip-flop resources for implementing combinational and sequential logic. The available 1,584 logic cells and 55,296 RAM bits support control logic, bus arbitration, low-speed communication interfaces, instrumentation, and general-purpose digital processing. With 108 I/O, the XC3S50A-4TQ144I offers more interface capacity than the smallest devices in the Spartan-3A family. The 144-LQFP package exposes those I/O along with configuration and power pins on a conventional surface-mount footprint. The 50,000-gate rating describes the family’s system-gate scale rather than a guaranteed clock rate, while the -4 speed designation and the manufacturer’s timing specifications determine actual performance. Configuration and pinout details should be verified against the DS529 family datasheet before PCB release. Typical applications include industrial control, telecommunications equipment, consumer electronics, embedded instrumentation, interface bridging, and low-density signal-processing systems. In each case, the combination of 1,584 logic cells, 55,296 RAM bits, 108 I/O, and a compact 144-lead package allows logic and interface functions to be consolidated without adopting a larger FPGA or a separate microcontroller for basic control tasks. Designers should preserve the required core-supply decoupling, use the manufacturer-recommended configuration interface, and confirm every signal’s I/O standard, drive strength, slew rate, and termination requirements against the DS529 datasheet. Programming tools, bitstream compatibility, and end-of-life considerations should also be reviewed because FPGA toolchains and family support evolve over time. This page consolidates verified distributor availability, package and resource details, drop-in replacement analysis, and practical design guidance into a compact engineering reference. It distinguishes documented device facts from parameters that still require manufacturer-data or board-level confirmation.

RFQ İletişim
XC3S50A-4TQG144C - Spartan-3A FPGA, 108 I/O | AMD
XC3S50A-4TQG144C

XC3S50A-4TQG144C - Spartan-3A FPGA, 108 I/O | AMD

The AMD XC3S50A-4TQG144C is a Spartan-3A field-programmable gate array with 15,840 logic cells, 108 user I/O, 1,584 internal configuration bits, and a 144-pin LQFP package. Its -4 speed designation supports operation up to 250 MHz, while 6.8 kB of block RAM provides dedicated on-chip storage for counters, packet buffers, and small data pipelines. The device is manufactured in a 1.2 V FPGA technology and targets compact embedded control, communications, instrumentation, and industrial logic systems. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and input/output behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, but provides substantially more configurable logic and routing resources. This makes it suitable for parallel data acquisition, protocol conversion, control sequencing, embedded signal processing, and other designs that benefit from hardware concurrency. Configuration data determines the implemented circuit, allowing design revisions without changing the PCB. The Spartan-3A architecture combines programmable logic blocks, dedicated block RAM, digital clock management resources, and selectable I/O standards in a single device. The 108 I/O positions give a board designer substantial connectivity in a 144-lead surface-mount package. The 250 MHz headline operating figure should not be interpreted as a guaranteed logic-clock rate for every arbitrary design; actual timing depends on the selected clocking resources, routing path, I/O standard, speed grade, and board conditions. The -4 suffix identifies the device speed grade, while the TQG144C portion identifies the 144-pin package and device-grade ordering information. This ordering code must be checked against the PCB footprint, temperature grade, and production requirements rather than treated as interchangeable with every XC3S50A suffix. The Spartan-3A family is an established programmable-logic platform, and the official DS529 family data sheet remains the primary document for configuration requirements, pin descriptions, electrical characteristics, and package drawings. Typical uses include industrial control and data acquisition, serial-interface bridging, embedded communications gateways, low-cost test equipment, and compact embedded processing systems. A microcontroller can handle supervisory control while the FPGA performs deterministic sampling, protocol conversion, or parallel computations in parallel with the processor. Such partitioning reduces pressure on a general-purpose CPU and can simplify timing-sensitive implementations. Board design should follow the AMD package pinout and configuration guidance exactly. Confirm that the LQFP-144 footprint, power rails, decoupling, configuration interface, and JTAG connections match the selected board revision. Because the Spartan-3A is a mature architecture, also verify software-tool support, bitstream compatibility, and the availability of any required configuration memory before committing the design to production. This product record combines the exact XC3S50A-4TQG144C identifiers with the AMD family data sheet and same-package replacement analysis. It also highlights practical configuration, layout, timing, and thermal checks that engineers can apply when qualifying an FPGA design for low-cost, compact, or industrial equipment.

RFQ İletişim
XC3S50A-4TQG144I - 50K Spartan-3A FPGA | AMD Xilinx
XC3S50A-4TQG144I

XC3S50A-4TQG144I - 50K Spartan-3A FPGA | AMD Xilinx

AMD Xilinx XC3S50A-4TQG144I is a Spartan-3A field-programmable gate array with 50,000 system gates, 1,584 configurable logic cells, 55,296 RAM bits, and 108 user I/O in a 144-LQFP package. The device operates from a 1.14 V to 1.26 V core supply and is implemented using 90 nm CMOS technology, with a stated maximum clock frequency of 667 MHz. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. The XC3S50A belongs to the Spartan-3A hierarchy of low-cost FPGAs, combining programmable logic with block RAM and a high pin count. This makes it a practical platform for embedded control, protocol conversion, signal conditioning, and data acquisition where a fixed application-specific integrated circuit would be too specialized. The principal device characteristics include 1,584 logic cells organized into 176 logic array blocks, 55,296 bits of block RAM, and 108 user I/O. Its -4 speed designation corresponds to the stated 667 MHz performance level, while the industrial I suffix identifies the extended-temperature grade. The -40 °C to 100 °C junction-temperature range supports industrial and otherwise temperature-demanding equipment, provided the board-level thermal design keeps the junction within its rated limit. Spartan-3A devices combine programmable logic fabric, configurable I/O blocks, dedicated block RAM, and internal clocking resources on one die. The 1.2 V core architecture reduces supply requirements while leaving the I/O structure capable of supporting external system connections. Design timing, however, depends on the selected clock region, logic depth, routing congestion, I/O standards, and external timing budget, so the 667 MHz figure should not be interpreted as a guaranteed operating frequency for every design. Typical uses include industrial automation modules with sensors and actuators, telecommunications interface equipment, embedded display and control systems, and low-cost data-acquisition products. The 108 available user I/O are particularly useful when the design must bridge multiple buses, capture parallel signals, or provide discrete control outputs while keeping the logic in reprogrammable hardware. The principal design consideration is the 144-LQFP footprint. Place all decoupling capacitors close to the supply pins, preserve the manufacturer-defined VCC and ground connections, and assign I/O standards only through supported pins. Use the AMD Spartan-3A family data sheet for the complete pin table, configuration requirements, and board-level power sequencing before fabrication. This page combines device specifications, application guidance, engineering design notes, and a focused replacement comparison to help engineers evaluate the XC3S50A-4TQG144I beyond a basic distributor parameter listing.

RFQ İletişim
XC3S50A-4VQ100C - 50K Spartan-3A FPGA | AMD | 100-TQFP
XC3S50A-4VQ100C

XC3S50A-4VQ100C - 50K Spartan-3A FPGA | AMD | 100-TQFP

AMD XC3S50A-4VQ100C is a Spartan-3A field-programmable gate array (FPGA) providing 1,584 logic cells, 55,296 RAM bits, 68 user I/Os, and approximately 50,000 logic gates in a 100-pin TQFP package. The device operates from a 1.14 V to 1.26 V core supply, uses 90 nm FPGA technology, and is implemented on a 0.667 GHz performance grade. A field-programmable gate array is a semiconductor device whose digital logic, memory, and I/O behavior are defined by a programmable configuration bitstream. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides reconfigurable parallel logic for cost-sensitive, I/O-intensive electronic products. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during development or, where configuration technology permits, after deployment. The Spartan-3A family targets high-volume designs requiring moderate logic density. This device includes 176 configurable logic blocks, 68 user I/Os, and 55,296 bits of block RAM. Supported configuration approaches include Master Serial mode using platform flash PROM, Master SPI mode using commodity serial flash, BPI mode using commodity parallel flash, Slave Parallel mode using SelectMAP or a processor, and Slave Serial mode. These interfaces allow the configuration source and board-level design to be selected according to cost, density, and update requirements. The XC3S50A-4VQ100C is identified as a -4 speed-grade device with 667 MHz performance, a 1.2 V core, and a commercial operating-temperature range of 0°C to 85°C junction temperature. Its 100-terminal surface-mount package provides 68 user I/O positions according to the verified distributor data. Configuration data is retained externally in a PROM or flash device, so the FPGA's implemented logic is not fixed at manufacture. Typical uses include industrial control interfaces, communication adapters, instrumentation, test equipment, embedded control, and general-purpose programmable logic. Its 68 I/Os make it appropriate for parallel data acquisition, control, bridging, and interface-conversion designs where a small pin count, legacy 90 nm economics, and reconfigurability are more important than the density offered by newer FPGA families. The primary design consideration is that configuration storage, programming, clocking, decoupling, and I/O voltage compatibility must be planned before schematic capture. Designers should use the AMD Spartan-3A family data sheet for the exact package pinout and device-specific constraints, and should verify the selected configuration PROM against the supported bitstream and interface requirements. This page consolidates the verified AMD and distributor specifications, exact package and resource information, commercially sourced alternatives, and practical replacement-selection guidance. It is intended to help engineers identify whether the XC3S50A-4VQ100C remains appropriate for an existing Spartan-3A design without overlooking temperature-grade or speed-grade differences.

RFQ İletişim
XC3S50A-4VQ100I - 50K Spartan-3A FPGA | AMD | Industrial
XC3S50A-4VQ100I

XC3S50A-4VQ100I - 50K Spartan-3A FPGA | AMD | Industrial

AMD XC3S50A-4VQ100I is a Spartan-3A field-programmable gate array with 50,000 system gates, 1,584 logic cells, 68 user I/Os, and a maximum stated performance of 667 MHz, supplied in a 100-pin TQFP package. The device operates from a 1.2 V core supply and is specified for industrial-temperature use from -40°C to +100°C. A Spartan-3A FPGA is a programmable logic device within the broader semiconductor and FPGA hierarchy. Unlike a fixed-function application-specific integrated circuit, it combines configurable logic, programmable interconnect, memory resources, and general-purpose I/O. Its 100-pin TQFP package makes it suitable for designs requiring moderate logic density and external peripheral connectivity without using a large ball-grid-array package. The XC3S50A-4VQ100I provides 1,584 logic cells and 68 I/Os, allowing designers to implement control logic, interface protocols, data acquisition, or embedded state machines in one programmable device. The -4 speed designation identifies its performance grade, while the I suffix identifies the industrial-temperature option reported in the verified product data. The 90 nm fabrication process and 1.2 V core supply are consistent with the Spartan-3A generation. Its architecture supports configuration from several serial and parallel memory interfaces, including Master Serial, Master SPI, BPI, Slave Parallel, SelectMAP, and Slave Serial modes. Configuration storage can therefore use commodity serial flash, parallel flash, or platform flash, depending on board-level requirements. The exact configuration file size, supported I/O standards, and recommended termination network are not included in the supplied source snippets. Typical uses include industrial automation, communications equipment, test and measurement systems, embedded control, and I/O-intensive consumer or industrial products. The 68 available I/Os support external sensors, displays, memory devices, and communications transceivers, while the 50K-gate device size is appropriate for moderate parallel logic rather than high-throughput processor applications. Design planning should include correct configuration-pin connections, suitable bypass capacitors, and a verified JTAG programming chain. The 100-TQFP footprint also requires careful escape routing for fine-pitch leads and adequate board area for power distribution. Because a detailed pin map and current pricing were not present in the supplied data, the package pinout is intentionally left unavailable and the commercial tiers require a current quotation. This product record consolidates verified distributor specifications, same-family drop-in candidates, application guidance, and practical FPGA design considerations. It is intended to help engineers assess package compatibility, configuration strategy, thermal requirements, and procurement without substituting unsupported electrical or lifecycle assumptions.

RFQ İletişim
XC3S50A-4VQG100C - 50K Spartan-3A FPGA VQFP-100 | AMD
XC3S50A-4VQG100C

XC3S50A-4VQG100C - 50K Spartan-3A FPGA VQFP-100 | AMD

The AMD Xilinx XC3S50A-4VQG100C is a Spartan-3A field-programmable gate array (FPGA) with 1,584 logic cells, 176 configurable logic blocks (CLBs) and 50,000 logic gates, packaged in a 100-pin VQFP (TQG100) surface-mount package with a 14 x 14 mm body. The device is built on a 90 nm CMOS process, uses a 1.2 V core supply and offers 68 user I/O, making it one of the smallest pin-count Spartan-3A options for cost-sensitive, I/O-intensive logic. A field-programmable gate array is a semiconductor whose internal interconnection and logic fabric are defined by a configuration bitstream loaded at power-up. In the device hierarchy an FPGA sits above programmable logic devices such as CPLDs and complex PLDs, and above that sit the ASIC and custom silicon it replaces. Because a single FPGA can implement what would otherwise require several glue-logic ICs and a microcontroller, it shortens development cycles and consolidates glue logic, interface adaptation and control functions onto a single silicon device. Key features of the XC3S50A-4VQG100C include the -4 speed grade, which corresponds to a 250 MHz system clock rate for this device, 68 user I/O in a compact 100-pin footprint, and the full Spartan-3A configuration feature set. Configuration is supported through Master Serial mode using a platform Flash PROM, Master SPI mode with commodity serial flash, BPI mode with commodity parallel flash, Slave Parallel mode (SelectMAP) using a processor, and Slave Serial mode. An on-chip oscillator and typical / startup clocking support the configuration and clock-management needs of small systems. Architecturally, the Spartan-3A fabric combines distributed RAM, dedicated block RAM, and 18 dedicated multipliers in DSP-enabled versions of the family, giving designers datapath resources without leaving the package. The 90 nm process delivers low static and dynamic power for a device with a 1.2 V core, while the -4 speed grade is the mainstream industrial and commercial cost point for designs that do not require the -5 grade timing margin. Typical applications for the XC3S50A-4VQG100C include industrial control and instrumentation front-ends, LED display and lighting controllers, low-cost sensor aggregation nodes, consumer appliance sequencers, small protocol converters and interface bridges, and education or prototyping platforms that need a compact, low-pin-count FPGA. A key design consideration is that the 100-pin VQFP footprint is among the tightest in the family, so routing to 68 I/O in a 14 x 14 mm area demands short, well-referenced escape routing and a solid ground plane under the device. Also note that the C suffix denotes the commercial 0 to 85 C temperature grade; industrial or extended-temperature assemblies should be selected when the end environment is wider.

RFQ İletişim
XC3S50A-4VQG100I - Spartan-3A 68-I/O FPGA | AMD
XC3S50A-4VQG100I

XC3S50A-4VQG100I - Spartan-3A 68-I/O FPGA | AMD

The AMD XC3S50A-4VQG100I is a Spartan-3A field-programmable gate array with 1,584 configurable logic cells, 68 user I/O pins, a 1.2 V core supply, and a 100-pin TQFP package. The device is specified for an industrial temperature range of -40°C to +100°C, making it suitable for temperature-stable programmable control, signal conditioning, interface bridging, and embedded data-processing systems. A field-programmable gate array is a digital semiconductor whose configurable logic, interconnect, and I/O resources can be programmed after manufacture. The Spartan-3A family belongs to the FPGA and CPLD product hierarchy and combines programmable logic density with a relatively large I/O count. This balance allows one package to implement control logic, protocol interfaces, data acquisition functions, and peripheral connectivity without requiring a separate microcontroller for every task. The XC3S50A-4VQG100I provides approximately 50,000 logic gates, 68 user I/O pins, 1,584 logic cells, and a 1.2 V core. Its -4 designation identifies the device speed grade, while the industrial suffix supports operation from -40°C to +100°C. The 100-pin TQFP package also exposes more I/O than smaller FPGA packages and remains practical for conventional board assembly. Exact RAM, block-RAM, clock, and I/O voltage details should be confirmed in the manufacturer datasheet before final design release. The Spartan-3A architecture is useful when a design requires deterministic parallel logic, flexible pin assignment, and firmware-controlled reconfiguration. Typical implementation patterns include I/O-intensive industrial controllers, data-acquisition front ends, communication protocol converters, motion-control sequencing, and display-interface logic. Parallel processing and dedicated I/O access can reduce the need for external glue logic while preserving a compact embedded footprint. A key design consideration is power and timing. The 1.2 V core rail must be generated cleanly and decoupled close to the device, while every external I/O voltage must satisfy the selected bank's voltage limits. Designers should also use the exact Spartan-3A pin table when assigning balls or pins, account for configuration and startup behavior, and validate timing with the appropriate Xilinx development tools for the installed device and speed grade. This page combines the exact device characteristics with package-specific guidance, practical application fit, comparison criteria, and engineering-oriented replacement notes. These details help engineers distinguish direct package-compatible options from alternatives that may require a different footprint, speed grade, temperature grade, or FPGA architecture.

RFQ İletişim
XC3S50AN-4FT256C - 50K Spartan-3AN FPGA | AMD
XC3S50AN-4FT256C

XC3S50AN-4FT256C - 50K Spartan-3AN FPGA | AMD

AMD XC3S50AN-4FT256C is a Spartan-3AN field-programmable gate array with 50,000 equivalent logic gates, 1,584 logic cells, 176 configurable logic blocks, 195 I/O, and a maximum clock frequency of 667 MHz. The device is supplied in a 256-ball grid array package and uses a 1.2 V core supply. Its combination of parallel programmable logic, dedicated digital signal processing resources, and embedded-memory capability makes it suitable for embedded signal-processing, communications, control, and industrial interface systems. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the broader programmable-logic hierarchy: programmable logic device, configurable logic device, FPGA, and semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA permits design changes, parallel processing, and hardware adaptation without changing the printed circuit board. The Spartan-3AN family combines configurable logic blocks, dedicated block RAM, and DSP resources in a programmable SoC-oriented architecture. Key device characteristics include 55,296 combinational gates, 1,584 configurable logic cells, 176 configurable logic blocks, 195 user I/O, and a listed maximum operating frequency of 667 MHz. The 90 nm fabrication process and 1.2 V core supply place the device in the classic low-power Spartan architecture. Its large BGA package also provides many signal connections for high-pin-count designs, although the dense ball grid requires careful escape-routing and assembly planning. The Spartan-3AN architecture supports parallel datapath implementation because multiple configurable logic blocks and dedicated arithmetic resources can operate concurrently. This is valuable for filters, fixed-point transforms, serial interfaces, and control logic that would require multiple conventional components in a fixed implementation. Designers can partition a system among lookup tables, flip-flops, block RAM, DSP arithmetic, dedicated I/O, and general-purpose I/O, then validate timing through the Spartan-3 FPGA design flow. Typical uses include industrial automation, data acquisition, instrumentation, communications infrastructure, embedded control, and digital signal-processing subsystems. The 195 I/O count supports multi-channel data collection and external interfaces, while the 667 MHz listed clock rate provides a high-speed fabric for pipelined processing. For designs requiring secure remote updates, embedded memory, or asynchronous serial configuration, the family-level Spartan-3AN features should be checked against the exact configuration and memory requirements. Board design requires careful attention to the 256-BGA footprint, multilayer PCB construction, via-in-pad and solder-mask practices where appropriate, and decoupling of the 1.2 V core and I/O supplies. Maintain the voltage and decoupling recommendations in the AMD Spartan-3AN family data sheet, and verify the pinout against the selected 256-ball package drawing rather than relying on family-level diagrams. This product record combines the exact ordering code, package information, Spartan-3AN resource figures, configuration references, and practical replacement guidance. It is intended to help engineers confirm footprint compatibility, evaluate known same-family alternatives, and plan an FPGA migration without overlooking bitstream, timing, assembly, or tool-chain consequences.

RFQ İletişim
XC3S50AN-4FT256I - 1584 Logic Cells Spartan-3AN | AMD
XC3S50AN-4FT256I

XC3S50AN-4FT256I - 1584 Logic Cells Spartan-3AN | AMD

The AMD XC3S50AN-4FT256I is a Spartan-3AN field-programmable gate array with 1,584 logic elements, 55,296 RAM bits, and 195 programmable I/O pins, packaged in a 256-ball LBGA. It uses 90 nm fabrication technology, has a 1.2 V core supply, and supports operation across an industrial junction-temperature range of -40°C to +100°C. The device is identified as a four-speed-grade variant in a 256-ball surface-mount package. A field-programmable gate array, or FPGA, is a programmable semiconductor whose configurable logic blocks, block RAM, programmable input/output resources, and dedicated hardware blocks can be assembled into application-specific digital circuits. FPGAs sit between fixed-function logic devices and software processors within the broader semiconductor hierarchy. They are useful when a design needs parallel processing, deterministic hardware response, flexible interface support, or field updates without changing the printed circuit board. The XC3S50AN provides 176 configurable logic blocks, 1,584 logic cells, and 55,296 bits of block RAM. Its 195 programmable I/O pins support connections to external memories, processors, sensors, communications circuits, and industrial control peripherals. The four speed designation supports designs that require more timing margin than a lower-speed grade, while the industrial temperature suffix identifies its intended -40°C to +100°C junction-temperature operating class. This Spartan-3AN device uses a 90 nm FPGA process and a 1.2 V core supply. These characteristics place it among Xilinx and AMD’s low-density Spartan devices, where configuration flexibility is balanced against relatively modest logic capacity. Design teams should evaluate the available logic, RAM, and I/O resources against the target design rather than relying on nominal gate counts alone. Typical applications include industrial control, data acquisition, embedded communications, instrumentation, embedded processing, and low-density interface or control logic. The 195 available I/O pins are especially useful when the board must connect directly to multiple sensors, memory devices, transceivers, or mixed-signal peripheral circuits while preserving programmable logic for timing and control functions. Use the manufacturer pinout and configuration guidance when assigning the 256-ball footprint. Confirm every power, ground, configuration, clock, and user-I/O connection against DS557, and budget startup configuration time and core supply requirements in the system power sequence. The legacy device also requires an appropriate Xilinx development environment and device support for implementation, simulation, and programming. This page combines device specifications, verified package details, application guidance, replacement analysis, and practical implementation considerations in one engineering-focused reference. It is intended to help designers assess logic capacity, timing class, thermal range, package compatibility, tool-chain availability, and sourcing constraints before integrating the FPGA into a new or existing platform.

RFQ İletişim
XC3S50AN-4TQ144I - 50K Spartan-3AN FPGA | Xilinx
XC3S50AN-4TQ144I

XC3S50AN-4TQ144I - 50K Spartan-3AN FPGA | Xilinx

The Xilinx XC3S50AN-4TQ144I is a Spartan-3AN field-programmable gate array with 55,296 RAM bits, 1,584 logic elements, and 108 user I/O pins in a 144-pin TQFP package. It uses 90 nm fabrication technology, operates from a 1.2 V core supply, and is rated for an industrial junction-temperature range of -40°C to 100°C. The -4 speed grade and industrial-temperature designation make it suitable for embedded control, communications, industrial automation, and compact digital signal-processing systems requiring reconfigurable logic. A field-programmable gate array, or FPGA, is a programmable digital semiconductor containing configurable logic blocks, programmable I/O, and embedded memory. Within the device hierarchy, the XC3S50AN-4TQ144I is a Spartan-3AN FPGA, a member of the Xilinx Spartan-3 family. Unlike a fixed-function application-specific integrated circuit, an FPGA can be programmed after manufacture to implement parallel processing, control logic, serial interfaces, protocol handling, or other system-specific functions. Principal features include 176 logic array blocks, 1,584 configurable logic elements, 55,296 bits of block RAM, and 108 user I/O pins. The -4 designation identifies the device speed grade, while the industrial suffix supports operation across a -40°C to 100°C junction-temperature range. The Spartan-3AN architecture also supports non-volatile configuration and data-storage capabilities, distinguishing it from the related Spartan-3A family. The 144-pin TQFP package exposes the device's programmable I/O and supply connections on a surface-mount PCB footprint. Its 108 user I/O count provides substantial parallel connectivity for external memories, data converters, communication transceivers, and general control peripherals. Designers should still confirm the exact I/O standard, pin assignment, and configuration requirements against the package-specific pinout before routing a new PCB. Typical applications include industrial control systems, data-acquisition equipment, embedded communications, instrumentation, video processing, and low-cost FPGA prototyping. The device is especially useful where logic parallelism or field reconfiguration provides more flexibility than a fixed microcontroller or application-specific controller. A key design consideration is that pin-compatible alternatives can differ in temperature grade, speed grade, embedded flash, and configuration behavior. Validate the complete ordering code, supported I/O standards, configuration memory interface, and power architecture before approving a replacement. This page combines package-aware alternatives, engineering guidance, and application analysis to support that decision. For this Spartan-3AN FPGA, the main design task is balancing flexible programmable logic against board-level requirements. The 50K-density device offers 1,584 logic elements and 108 user I/O pins, providing enough parallel resources for compact embedded systems without requiring a larger FPGA package. Its 90 nm process and 1.2 V core supply also require careful attention to bypass capacitance, signal integrity, thermal margins, and configuration startup behavior. Engineers should use the manufacturer datasheet and package pin table as the authority for final connectivity, supported voltage standards, and power sequencing.

RFQ İletişim