Ürünler (46.000+)

XC6SLX25-N3CSG324C - Spartan-6 FPGA, 24051 Cells | AMD
XC6SLX25-N3CSG324C

XC6SLX25-N3CSG324C - Spartan-6 FPGA, 24051 Cells | AMD

The AMD XC6SLX25-N3CSG324C is a member of the Spartan-6 LX family of Field Programmable Gate Arrays (FPGAs), designed for high-volume, cost-sensitive applications that require leading system integration capabilities. This device features 24,051 logic cells, 226 user I/O pins, and 958,464 total RAM bits, all housed in a 324-ball CSBGA (Chip-Scale Ball Grid Array) package. Operating from a 1.2V core supply, the XC6SLX25-N3CSG324C is fabricated using a 45nm process technology, balancing performance with power efficiency. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be programmed after manufacturing to implement any digital logic function. FPGAs consist of configurable logic blocks (CLBs), programmable interconnects, and I/O blocks, allowing designers to create custom hardware without the cost and lead time of ASIC development. The Spartan-6 family sits within the broader FPGA hierarchy, positioned as a cost-optimized line below the higher-performance Virtex and Kintex families, making it ideal for applications where price and power are critical. Key features of the XC6SLX25-N3CSG324C include 1,879 CLBs, 38 DSP48A1 slices for digital signal processing, and support for a wide range of I/O standards through SelectIO technology. The device also includes enhanced mixed-mode clock management (MMCM) blocks for precise clock generation, and supports configuration via JTAG, SPI, and BPI interfaces. With a junction temperature range of 0°C to 85°C, this commercial-grade FPGA is suitable for typical industrial and consumer environments. The Spartan-6 architecture incorporates advanced power management modes, including suspend and hibernate states, to reduce static power consumption. The 45nm process technology enables high logic density while maintaining low dynamic power, making the XC6SLX25-N3CSG324C an energy-efficient choice for battery-powered or thermally constrained designs. Additionally, the device supports AES bitstream encryption and Device DNA protection for enhanced IP security. Typical applications for the XC6SLX25-N3CSG324C include motor control, industrial networking, video processing, and software-defined radio. Its 226 I/O pins and 324-ball package provide ample connectivity for interfacing with sensors, ADCs, DACs, and communication transceivers. The FPGA's reconfigurability allows for rapid prototyping and field updates, reducing time-to-market. When designing with this FPGA, careful attention must be paid to power supply decoupling and PCB layout to ensure signal integrity at high I/O speeds. The device requires a 1.2V core supply and 2.5V/3.3V auxiliary supplies, with proper sequencing as specified in the datasheet. Thermal management is also important, as the CSBGA package has a thermal resistance that must be considered for high-utilization designs.

RFQ İletişim
XC6SLX25-N3CSG324I - 24K Spartan-6 LX FPGA | AMD
XC6SLX25-N3CSG324I

XC6SLX25-N3CSG324I - 24K Spartan-6 LX FPGA | AMD

The AMD XC6SLX25-N3CSG324I is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 226 user I/Os, and a -3 performance grade, packaged in a 324-ball CSPBGA. The device uses 45 nm CMOS technology and is identified as a 1.2 V FPGA, making it suitable for industrial embedded systems requiring deterministic programmable logic, substantial parallel processing, and a high pin count. A field-programmable gate array is a digital semiconductor whose logic, interconnect, and signal-processing resources are configured after manufacture. Within the product hierarchy, an FPGA belongs to programmable logic devices and provides an alternative to fixed-function ASIC implementation. The Spartan-6 LX family combines configurable logic blocks, block RAM, DSP resources, programmable I/O, and dedicated configuration functions in a single device. This makes the XC6SLX25 suitable when system requirements evolve faster than a custom ASIC design cycle. The principal device characteristics are 24,051 logic cells, 226 user I/Os, 1,879 configurable logic blocks, and an indicated operating frequency of 806 MHz. The -3 designation identifies the highest Spartan-6 performance grade. Its 324-ball chip-scale BGA package provides 226 user I/Os, while the industrial N suffix and an operating junction-temperature range of -40°C to +100°C support equipment intended for extended industrial environments. RoHS compliance and lead-free status are also identified. The -3 grade offers the strongest timing performance within the Spartan-6 LX speed options, making it useful where processing throughput or interface timing margin matters. Its 24,051-cell logic capacity is considerably greater than smaller Spartan-6 LX devices, allowing parallel algorithms, control logic, and interface bridging to share one programmable platform. The 226 I/O count supports systems requiring numerous digital connections, although board designers must observe the electrical and pinout constraints of the dense CSPBGA footprint. Typical uses include industrial automation and machine vision, industrial networking, embedded instrumentation, control systems, video processing, and embedded data-acquisition equipment. In each case, the combination of parallel programmable logic and 226 I/Os can reduce external component count while retaining the flexibility to update functionality through a configuration bitstream. Configuration storage, clocking, decoupling, and thermal management remain essential board-level concerns. For PCB implementation, follow AMD's Spartan-6 package and pinout files and the manufacturer data sheet for BGA escape routing, power planes, decoupling, and exposed-pad connections where applicable. Treat the -3 timing grade as a complete design constraint, including clock uncertainty, I/O standards, and external memory interface timing. Verify the assembled configuration path and pin assignments before fabrication. This product page combines the Spartan-6 LX device identity, package characteristics, sourcing information, same-footprint alternatives, comparison criteria, and practical implementation guidance. It is intended to help engineers confirm whether the XC6SLX25-N3CSG324I fits a given logic-density, I/O-count, speed-grade, and environmental requirement before beginning board-level design.

RFQ İletişim
XC6SLX25-N3FG484C - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-N3FG484C

XC6SLX25-N3FG484C - 24,051-Cell Spartan-6 LX FPGA | AMD

AMD XC6SLX25-N3FG484C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 1,879 logic blocks, 958,464 RAM bits, and 266 programmable I/O pins in a 484-pin FBGA package. The device uses 45 nm fabrication technology and operates from a 1.14 V to 1.26 V internal core supply, while its commercial temperature range extends from 0°C to 85°C junction temperature. These characteristics place it in the FPGA & CPLD category as a configurable semiconductor for parallel processing, control, interface, and embedded-logic systems. A field-programmable gate array is a programmable-logic device whose configurable logic blocks, block RAM, programmable I/O, and dedicated resources can be configured after manufacture. An FPGA sits above simple fixed-function logic in the product hierarchy: fixed-function controllers and discrete logic provide predetermined behavior, while an FPGA supports reconfigurable hardware, parallel data paths, adaptable interfaces, and product updates without changing the PCB. The Spartan-6 LX architecture therefore serves as a programmable-logic platform rather than a conventional microcontroller. The XC6SLX25 combines 24,051 programmable logic cells with 266 I/O and 958,464 RAM bits, creating a useful balance between computation and interface capacity. Its 45 nm process technology supports a compact, power-efficient implementation for embedded control, industrial automation, communications, instrumentation, and consumer equipment. The 484-pin FBGA package also provides enough physical connections for wide external data buses, multiple memory interfaces, clocks, and control signals. The -N3FG484C ordering code identifies a Spartan-6 LX resource configuration in the 484-pin FBGA package, while the final C suffix identifies the commercial temperature option. The commercial-grade junction-temperature specification of 0°C to 85°C suits designs operating in controlled indoor, laboratory, telecom, and industrial enclosure environments. Designers must still verify board-level airflow, local heat spreading, and the maximum ambient temperature permitted by the complete system. Typical applications include industrial control and data acquisition, embedded communications gateways, test and measurement instruments, video and image processing, motor-control supervisory logic, and general-purpose accelerator boards. The FPGA can implement parallel algorithms, state machines, protocol conversion, sensor aggregation, and memory-control functions in one device. Designs that require deterministic timing can use dedicated clocking and I/O resources while assigning repetitive operations to configurable logic blocks. The main design consideration is package complexity. A 484-pin FBGA demands careful escape routing, via planning, power-plane integrity, and assembly capability. Follow the AMD Spartan-6 package pinout files for ball assignments and PCB escape geometry. Place decoupling capacitance near the relevant supply balls, keep sensitive clock and configuration paths short, and verify the selected memory interface, I/O standards, clocking topology, and thermal conditions with the manufacturer datasheet and design-tool guidance.

RFQ İletişim
XC6SLX25-N3FGG484C - 24,051 Logic Cell Spartan-6 LX FPGA
XC6SLX25-N3FGG484C

XC6SLX25-N3FGG484C - 24,051 Logic Cell Spartan-6 LX FPGA

The AMD/Xilinx XC6SLX25-N3FGG484C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 266 user I/Os, a 1.2 V supply, and a 484-pin FCBGA package. It provides 3,758 adaptive logic modules, 936 kbit of embedded memory, and a 45 nm CMOS implementation for programmable logic, embedded processing, and signal-processing designs. A field-programmable gate array, or FPGA, is a programmable-logic semiconductor whose configurable logic blocks, interconnect resources, block RAM, and I/O blocks form a hardware platform that can be programmed after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device and a semiconductor. The Spartan-6 LX family combines configurable logic, DSP resources, dedicated memory, and high-speed I/O in a single device, allowing one chip to implement control logic, communication interfaces, and parallel processing functions. The XC6SLX25-N3FGG484C combines 3,758 adaptive logic modules with 24,051 logic cells and 936 kbit of embedded memory. Its 266 I/Os support connections to external memory, control signals, and high-speed interfaces. The listed operating supply is 1.2 V, while the device is manufactured using 45 nm CMOS technology. The FGG484 package provides 484 solder balls in a compact surface-mount FCBGA configuration and is suitable for multilayer PCB designs requiring a large pin count. The -3 suffix identifies the device’s performance grade, while the N designation is associated with the commercial-temperature family. This distinction matters because timing closure, available operating temperature, and migration planning must follow the exact ordering code. The N3FGG484C configuration combines the Spartan-6 LX resource level with the 484-ball package, making it appropriate for industrial control, communications, embedded video, and test-equipment applications that need deterministic parallel logic. Typical uses include industrial automation controllers, networking equipment, video-processing pipelines, sensor-fusion systems, and communication infrastructure. Its 24,051 logic cells allow parallel filtering, protocol handling, and control functions to share one FPGA. The 936 kbit of embedded block RAM supports buffering, packet storage, lookup tables, and waveform data, while the 266 I/Os provide substantial connectivity to external transceivers, memory devices, and data converters. A successful implementation must account for the FCBGA footprint, ball assignment, power integrity, and thermal behavior. Use the AMD Spartan-6 package-device pinout files when assigning PCB tracks and verify every pin against the exact device speed and temperature codes. High-speed interfaces also require disciplined clock routing, controlled impedance, and validation of voltage and timing constraints in the selected Vivado design flow. This product overview connects the exact XC6SLX25-N3FGG484C configuration with its logic resources, memory capacity, I/O count, package, and practical design constraints. It also distinguishes it from related Spartan-6 speed grades and temperature codes so engineers can select a compatible replacement without overlooking timing or qualification requirements.

RFQ İletişim
XC6SLX25-N3FTG256C - 24,051-Cell Spartan-6 FPGA | AMD
XC6SLX25-N3FTG256C

XC6SLX25-N3FTG256C - 24,051-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX25-N3FTG256C is a 24,051-cell Spartan-6 LX field-programmable gate array built on 45 nm CMOS technology, with a 1.2 V core supply and 186 I/O in a 256-pin FTG256 ball-grid-array package. It combines programmable logic, block RAM, and DSP resources in a single reconfigurable semiconductor for embedded control, signal processing, communications, and industrial systems. A field-programmable gate array is a programmable digital semiconductor whose logic fabric, memory blocks, and dedicated processing resources can be configured after manufacture. Within the FPGA hierarchy, the XC6SLX25 belongs to the Spartan-6 LX family and provides a larger logic capacity than the smaller LX9 device while retaining the same 256-pin package family. This balance makes it suitable for designs requiring parallel processing and multiple peripheral interfaces without moving to a larger FPGA package. The device provides 24,051 logic cells and 186 user I/O in the 256-pin FTG256 package. Its 45 nm CMOS construction and 1.2 V core operation place it in the mainstream low-power programmable-logic class. The N3 ordering code identifies the specific Spartan-6 LX speed and qualification configuration, while the FTG256 suffix identifies the 256-ball fine-pitch package. Package dimensions, ball assignments, and exposed thermal requirements should be taken from the AMD Spartan-6 package documentation rather than inferred from the generic BGA designation. The architecture is intended for parallel datapath implementation, where multiple LUT-based logic and DSP operations can execute concurrently. This is more useful than a sequential processor approach when the design benefits from deterministic hardware pipelines, wide buses, or simultaneous interface conversion. Internal block RAM reduces external memory traffic in buffering and packet-processing designs, while programmable I/O can be assigned according to the selected design and speed grade. Typical applications include industrial automation and factory control, embedded video processing, communications infrastructure, test-and-measurement equipment, and compact control subsystems. In a communications design, parallel blocks can accelerate framing or signal processing; in industrial equipment, programmable logic can coordinate sensors, motion functions, and safety-oriented monitoring. The 186 available I/O also support systems that need multiple buses, status signals, and external memory interfaces. PCB planning should focus on the FTG256 land pattern, ball map, power rails, decoupling, and thermal design. Place input and output return paths close to the relevant balls, provide high-frequency decoupling at the supply pins, and follow the package-specific ball-assignment files when assigning constraints. Before release, verify that the selected bitstream is compatible with the exact device speed code and package identifier. This product page combines the exact Spartan-6 device identity, package information, pin-compatible family choices, comparison parameters, and practical PCB and design guidance. It is intended to help engineers confirm footprint compatibility, evaluate logic capacity, and plan an FPGA implementation without relying on a bare catalog listing.

RFQ İletişim
XC6SLX25-N3FTG256I Spartan-6 LX FPGA | AMD Xilinx
XC6SLX25-N3FTG256I

XC6SLX25-N3FTG256I Spartan-6 LX FPGA | AMD Xilinx

The AMD Xilinx XC6SLX25-N3FTG256I is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 1,879 configurable logic blocks, 186 I/O pins, and 958,464 bits of block RAM. It uses 45 nm CMOS technology, operates from a 1.14 V to 1.26 V core supply, and is packaged in a 256-pin FT BGA measuring 17 mm by 17 mm. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic IC and a reconfigurable processor. The Spartan-6 LX family combines configurable logic blocks, programmable I/O, embedded memory, and clock-management resources in one package, allowing parallel hardware functions to replace multiple discrete logic devices. The XC6SLX25-N3FTG256I provides 24,051 logic cells for control logic, data acquisition, communications, and general digital processing. Its 958,464 RAM bits support buffering, packet storage, lookup functions, and other memory-intensive operations. The device exposes 186 user I/O pins, while its 256-FTBGA package provides a compact surface-mount footprint for space-constrained industrial and embedded systems. The N3 designation identifies the Spartan-6 LX -3N performance option within the specified temperature-grade ordering system. A 1.14 V to 1.26 V operating-supply range supports low-voltage core operation, while the 45 nm CMOS implementation reflects the process technology used for this device family. Designers must also supply the required auxiliary and I/O voltages specified in the manufacturer data sheet. Typical applications include industrial control systems, data-acquisition equipment, embedded communications, video-processing pipelines, instrumentation, and compact control platforms. The combination of 24,051 logic cells, 186 I/O, and embedded RAM makes the device suitable for designs that need parallel throughput without the complexity of a higher-end FPGA family. PCB implementation requires a multilayer board with careful power-plane design, decoupling, and a controlled-routing layout for the 256-pin FTBGA package. Use the AMD Spartan-6 package pinout files to assign every ball and confirm boundary-scan, configuration, clock, and power connections before fabrication. This page combines package and resource details with same-footprint alternatives, comparison data, and implementation guidance. It is intended to accelerate device selection while preserving the checks needed for configuration, signal integrity, thermal performance, and manufacturing readiness.

RFQ İletişim
XC6SLX25T-2CSG324C - 24,051 Logic Cell Spartan-6 LXT FPGA
XC6SLX25T-2CSG324C

XC6SLX25T-2CSG324C - 24,051 Logic Cell Spartan-6 LXT FPGA

The AMD XC6SLX25T-2CSG324C is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, a -2 speed grade, and a 324-ball CSPBGA package measuring approximately 15 x 15 mm. It provides 3,758 adaptive logic modules, 52 block RAM blocks, 38 DSP slices, two GTP transceivers, and one PCI Express endpoint block. Its commercial temperature grade is specified from 0°C to 85°C. A field-programmable gate array is a semiconductor device whose digital logic, interfaces, and processing pipelines can be configured after manufacture. The Spartan-6 LXT family extends the FPGA hierarchy from individual configurable logic blocks to a system-on-chip-style fabric containing programmable logic, embedded memory, DSP resources, high-speed serial transceivers, and PCI Express connectivity. This combination allows hardware functions to be consolidated into one device while retaining field-updatable configuration. The -2 speed grade places this device within the Spartan-6 performance options of -3, -2, and -1L. Its 24,051 logic cells map to 3,758 adaptive logic modules, while 52 block RAMs support data buffering, packet storage, and general-purpose embedded-memory designs. Thirty-eight DSP slices accelerate arithmetic and signal-processing workloads, and the two GTP transceivers support high-speed serial links where the board-level design provides compatible clocking, signal integrity, and power delivery. Architecturally, the LXT family combines configurable logic with dedicated communication resources rather than relying entirely on soft serial transceivers. The integrated PCI Express endpoint block enables a single-chip solution to participate in a PCI Express system. The 0.8 mm ball pitch also makes the CSPBGA-324 footprint compact, although it requires careful escape routing, multilayer PCB construction, and assembly capability suitable for fine-pitch BGA packages. Typical uses include industrial image and signal processing, embedded control systems, communications infrastructure, instrumented equipment, and compact PCI Express endpoints. The device can combine parallel logic acquisition with DSP filtering and serial communications in one programmable package. Designers should account for configuration storage, clocking, power rails, decoupling, transceiver I/O standards, and thermal performance when planning the board around the 324-ball package. For a direct PCB upgrade, verify the complete ordering suffix because the final letter identifies the temperature grade. XC6SLX25T-2CSG324I shares the same device and package organization but targets an extended industrial temperature range, making it suitable when a board must operate below 0°C or above 85°C. Other Spartan-6 densities in CSG324 may share the package mechanically, but resource totals and device identifiers must be reviewed before substitution. This product overview combines the Spartan-6 resource configuration, package details, verified alternatives, and practical FPGA design considerations into one engineering reference. It also distinguishes true same-package choices from larger or smaller Spartan-6 devices that cannot be treated as equivalent without redesign, timing revalidation, and bitstream verification.

RFQ İletişim
XC6SLX25T-2CSG324I - 24,051-Cell Spartan-6 LXT FPGA | AMD
XC6SLX25T-2CSG324I

XC6SLX25T-2CSG324I - 24,051-Cell Spartan-6 LXT FPGA | AMD

The AMD XC6SLX25T-2CSG324I is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, integrated high-speed serial transceivers, and a 500 MHz internal frequency in a 324-ball CSBGA package. The -2 speed grade, industrial temperature marking, 15 mm by 15 mm lead-free package, and 0.80 mm ball pitch make it suitable for compact embedded, communications, industrial control, and signal-processing systems requiring deterministic programmable logic and integrated serial connectivity. A field-programmable gate array is a semiconductor whose digital functions are defined after fabrication by loading a configuration bitstream. In the broader device hierarchy, an FPGA belongs to programmable logic devices, programmable semiconductors, and the wider category of digital integrated circuits. Compared with a fixed-function application-specific integrated circuit, an FPGA allows logic, interfaces, timing, and parallel processing architectures to be revised without changing the PCB. The Spartan-6 LXT architecture combines 24,051 logic cells with embedded GTP high-speed transceivers. The LXT devices are intended for designs combining programmable logic with serial connectivity, while the -2 suffix identifies the device speed grade. The 324-ball CSBGA package provides 324 physical balls at a 0.80 mm pitch in a 15 mm by 15 mm body. The manufacturer documentation also identifies 1.2 V operation and 45 nm fabrication technology as key implementation characteristics. Configuration and programming are supported through JTAG boundary-scan paths, with configuration bitstreams generated using the ISETM flow and BitGen. The device supports MultiBoot operation for designs that manage multiple FPGA configuration images. Manufacturer documentation specifically states that BPI configuration is not supported for XC6SLX25 and XC6SLX25T devices, which must be considered when selecting a boot architecture for an industrial control system. Typical applications include industrial automation controllers, video and image-processing pipelines, high-speed serial interface bridges, networked embedded systems, and test-and-measurement equipment. The integrated transceivers are particularly useful for reducing the need for discrete serial-interface hardware when the design uses the supported line rates and protocols. The 500 MHz internal frequency provides a useful clocking reference, although actual system timing still depends on the selected I/O standards, clock sources, routing, and design constraints. PCB design should follow the AMD Spartan-6 package pinout files rather than infer connectivity from generic BGA layouts. Keep high-speed serial differential pairs routed with controlled impedance and minimize discontinuities. Validate power rails, decoupling, thermal performance, configuration pins, and active configuration startup behavior before releasing the layout. Because FPGA pin assignments are design-dependent, use the pinout file matching the exact package, speed grade, temperature grade, and device suffix. This page combines the manufacturer’s device identity and package information with engineering-focused guidance for configuration, high-speed routing, power planning, and footprint-compatible replacement evaluation. It also distinguishes genuine same-package options from superficially similar Spartan-6 parts whose logic density, speed grade, transceiver population, or temperature rating makes them unsuitable for an unqualified substitution.

RFQ İletişim
XC6SLX25T-2FG484C - Spartan-6 LXT 24K FPGA | AMD
XC6SLX25T-2FG484C

XC6SLX25T-2FG484C - Spartan-6 LXT 24K FPGA | AMD

The AMD/Xilinx XC6SLX25T-2FG484C is a Spartan-6 LXT field-programmable gate array built on 45 nm CMOS technology, with 24,051 logic cells, a listed internal frequency of 500 MHz, and a 484-pin FBGA package. The -2 suffix identifies the performance grade, while FG484C identifies the commercial-temperature, lead-free 15 x 15 mm package configuration. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, memory resources, and input/output blocks. This device belongs to the hierarchy FPGA, programmable logic device, digital semiconductor, and integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured for logic, control, signal processing, communications, or embedded systems, making it useful when product requirements evolve late in development. The Spartan-6 LXT family combines a 45 nm process with configurable logic, block RAM, digital signal processing resources, and high-speed serial transceivers. The XC6SLX25T provides 24,051 logic cells and a listed internal frequency of 500 MHz. Its 484-pin FBGA package supports dense PCB routing, while the lead-free package configuration supports RoHS-oriented product development. The commercial operating-temperature range is 0 to 85 C. The -2 performance grade provides a balanced operating point for designs requiring more timing margin than the -1 grade but not the highest performance of the -3 grade. This distinction matters in clocked interfaces, DSP pipelines, and control systems: designers should use the published timing constraints and speed-grade-specific characteristics when defining clock periods, I/O standards, and implementation targets rather than assuming identical timing across grades. Typical uses include industrial automation, video and image processing, communications infrastructure, instrumentation, embedded control, and parallel data acquisition. The combination of 24,051 logic cells and dedicated FPGA resources allows designers to implement multiple control channels, protocol interfaces, filtering, and state machines in one device. A high-speed serial transceiver is particularly useful where the design must connect to serial links rather than only conventional parallel I/O. PCB implementation requires careful power planning, decoupling, clocking, and signal-integrity control. Follow the AMD Spartan-6 package pinout files and device documentation when assigning every 484 ball, especially power, ground, configuration, clock, and transceiver pins. Validate the selected I/O standard, voltage, pull-up or pull-down requirement, bank voltage, and external component recommendations before releasing the layout. This page combines package, logic-cell, speed, temperature, and interface information with practical selection guidance. It also distinguishes speed-grade and temperature-grade alternatives that share the target footprint, helping engineers identify a valid replacement without confusing package identity, performance class, or device functionality.

RFQ İletişim
XC6SLX25T-2FG484I - 24,051-Cell FPGA | AMD/Xilinx
XC6SLX25T-2FG484I

XC6SLX25T-2FG484I - 24,051-Cell FPGA | AMD/Xilinx

The AMD/Xilinx XC6SLX25T-2FG484I is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, up to 250 I/O, and a 500 MHz internal frequency, housed in a 484-ball FBGA package. The -2 speed grade supports performance-oriented designs, while the I suffix denotes the industrial-temperature option. A field-programmable gate array is a semiconductor device whose digital logic, interfaces, and signal-processing blocks are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where configurable logic blocks, programmable I/O, embedded memory, DSP resources, and clock-management circuits implement control, networking, image-processing, and interface functions without requiring a custom ASIC mask set. The XC6SLX25T family combines 24,051 logic cells with as many as 250 user I/O in a 23 mm by 23 mm, 1.0 mm-pitch FBGA package. Its 500 MHz internal-frequency figure indicates the device's stated internal operating range, while actual interface and design performance also depends on the selected clocking resources, I/O standards, speed grade, and external timing constraints. The -2 speed designation places this device in the Spartan-6 performance range identified by AMD as one of the family's available grades. The T suffix identifies the Spartan-6 LXT family, and the FG484 package designation denotes the 484-ball surface-mount configuration. These suffix meanings should be confirmed against the AMD package and ordering documentation before a new PCB or procurement decision. Typical applications include industrial control, video display bridges, embedded processing interfaces, network equipment, test systems, and general-purpose programmable logic. The combination of substantial logic capacity and a large I/O count makes the device useful for designs joining multiple interfaces, clock domains, memory resources, and real-time datapaths on one FPGA. Design planning should begin with the AMD package pinout and Spartan-6 family documentation. Verify differential pairs, supply pins, configuration pins, clock-capable pins, and exposed thermal requirements against the exact -2 industrial ordering code. Use the manufacturer's package files to generate PCB land patterns and bonding constraints rather than relying on generic BGA dimensions. This product record combines package, logic-capacity, temperature, speed-grade, and application information with a practical comparison of pin-compatible Spartan-6 options. It also highlights the electrical, thermal, and lifecycle checks required before using a mature FPGA family in a new industrial design.

RFQ İletişim
XC6SLX25T-2FGG484C - Spartan-6 LXT FPGA | AMD Xilinx
XC6SLX25T-2FGG484C

XC6SLX25T-2FGG484C - Spartan-6 LXT FPGA | AMD Xilinx

AMD Xilinx XC6SLX25T-2FGG484C is a Spartan-6 LXT field-programmable gate array built on 45 nm CMOS technology, with 24,051 logic cells, 958,464 RAM bits, 250 I/Os, and a 484-ball plastic BGA package. The -2 speed grade supports a listed internal frequency of 500 MHz, while its 1.14 V to 1.26 V operating supply range is characteristic of the Spartan-6 generation. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, memory, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, joining CPLDs and mask-programmable logic devices as configurable alternatives to application-specific integrated circuits. Spartan-6 devices combine configurable logic blocks, block RAM, digital clock managers, and programmable I/O in a single surface-mount device. The XC6SLX25T provides 1,879 configurable logic blocks or CLBs, 24,051 logic cells, and 958,464 RAM bits. Its 250 I/Os support communication interfaces, control signals, data acquisition, and external memory interfaces. The device also includes 48 DSP slices according to the manufacturer datasheet, allowing arithmetic and filtering functions to be implemented without relying entirely on external accelerators. The -2 designation identifies the device speed grade, while the FGG484 suffix identifies the 484-ball plastic BGA configuration with a 0.80 mm pitch. The commercial operating-temperature range is 0°C to 85°C. This combination targets moderate-complexity embedded systems where designers need programmable logic, moderate memory capacity, numerous I/Os, and deterministic control without the cost of a larger FPGA. Typical uses include industrial automation controllers, automotive infotainment interfaces, consumer electronics, video and image-processing pipelines, communications infrastructure, and embedded instrumentation. Its balance of 24,051 logic cells and 250 I/Os is especially useful for protocol bridging, sensor aggregation, motor and machine control, and real-time signal conditioning. Design around the 1.14 V to 1.26 V core supply range and follow AMD's published decoupling, configuration, clocking, and package-layout guidance. The 484-BBGA footprint requires careful ball assignment, via-in-pad or through-via escape routing, adequate ground distribution, and thermal planning for sustained high-utilization operation. This page combines package, logic-capacity, memory, temperature, and application details with same-footprint alternatives and practical PCB guidance. It also distinguishes the -2, -3, N3, commercial-temperature, and industrial-temperature variants so engineers can identify a suitable replacement without confusing speed-grade or environmental changes with a true functional drop-in.

RFQ İletişim
XC6SLX25T-2FGG484I - 24K LEXT Spartan-6 FPGA | AMD
XC6SLX25T-2FGG484I

XC6SLX25T-2FGG484I - 24K LEXT Spartan-6 FPGA | AMD

The AMD XC6SLX25T-2FGG484I is a Spartan-6 LXT field-programmable gate array with 24,051 logic elements, 250 I/O, and a 484-BBGA package. It operates from a 1.14 V to 1.26 V supply range, uses 45 nm CMOS technology, and is specified for an internal frequency of 500 MHz. The -2 speed grade and industrial temperature designation place it between the higher-performance -3 grade and lower-performance -1 grade for applications that require a balance of performance, operating range, and logic density. A field-programmable gate array is a semiconductor whose digital logic, interfaces, and signal processing can be configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, where it combines configurable logic blocks, programmable I/O, embedded memory, clocking resources, and dedicated hard processors or blocks. The Spartan-6 LXT family extends the Spartan-6 architecture with logic optimized for demanding embedded signal-processing and control systems rather than only general-purpose glue logic. The XC6SLX25T provides 24,051 logic elements, 3,758 adaptive logic modules, and 936 kbit of embedded memory according to the manufacturer comparison data. Its 250 I/O provide substantial connectivity for parallel buses, control signals, serial interfaces, and external memory. A 500 MHz internal-frequency figure supports demanding clocked logic, while the 45 nm CMOS implementation and 1.2 V nominal core supply fit established low-voltage digital design practices. The FGG484 package is a lead-free 15 mm by 15 mm ball-grid array with a 0.80 mm pitch. Its high pin count allows the device to expose more programmable I/O than smaller Spartan-6 packages. The package also imposes demanding assembly requirements because fine-pitch balls require a qualified BGA process, suitable PCB land pattern, and careful control of thermal and soldering conditions during assembly. Typical uses include industrial control, data acquisition, communications equipment, embedded processing, test and measurement, and high-density programmable logic. The LXT feature mix and 24,051 logic elements make the device suitable when a design needs substantially more parallel I/O and logic capacity than a small control FPGA while retaining a 45 nm Spartan-6 footprint and architecture. A critical design consideration is thermal management: the 1.2 V core supply and dense BGA package require a PCB construction that can remove heat from the device. Because the available material does not provide detailed power, thermal-resistance, or absolute-maximum ratings, those values should be taken directly from the manufacturer Spartan-6 documentation before finalizing the power tree and board stack-up. This page combines the exact ordering information, electrical identifiers, package characteristics, engineering applications, and same-package replacement considerations needed to qualify the XC6SLX25T-2FGG484I for a new programmable-logic design.

RFQ İletişim
XC6SLX25T-3CSG324C - 24,051-Cell Spartan-6 LXT FPGA | AMD
XC6SLX25T-3CSG324C

XC6SLX25T-3CSG324C - 24,051-Cell Spartan-6 LXT FPGA | AMD

AMD XC6SLX25T-3CSG324C is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, 190 user I/Os, and a 324-CSPBGA package. It is built on 45 nm CMOS technology, uses a 1.2 V core supply, and provides 936 Kbit of block RAM, 38 DSP48A1 slices, and two GTP transceivers. A field-programmable gate array is a semiconductor whose logic, memory, signal processing, and I/O functions are configured after fabrication. An FPGA sits between fixed-function logic devices and software-programmable processors. It combines parallel hardware execution, reconfigurable resources, and deterministic control in the hierarchy of programmable logic devices, semiconductors, and digital processing systems. The XC6SLX25T-3CSG324C includes 1,879 configurable logic blocks, approximately 30,064 registers, and 76 multiplier blocks described as 18-by-18 multipliers. Two GTP transceivers operate up to 3.2 Gbps, while one PCI block supports PCI interface designs. The 190 user I/Os support integration with external memory, control circuitry, communication links, and mixed-signal systems. The -3 designation identifies the highest-performance Spartan-6 LXT speed grade, while CSG324 identifies the 324-ball chip-scale package. The C suffix denotes the commercial temperature option, and the product is specified for surface mounting with a 0.8 mm ball pitch. Its 45 nm CMOS implementation balances programmable logic density with integrated RAM, DSP, high-speed serial transceivers, and PCI resources. Typical uses include industrial control, automotive electronics, embedded processing, communications equipment, video and image processing, and general-purpose interface consolidation. The combination of 38 DSP48A1 slices supports parallel filtering and fixed-point arithmetic, while the dual GTP transceivers support high-speed serial links. Its 190 I/Os make it suitable for designs requiring substantially more external connectivity than a small microcontroller provides. PCB implementation should follow AMD's official Spartan-6 package pinout files and power-supply recommendations. The 324-ball package requires careful escape routing, clean power distribution across multiple supply rails, and thermal analysis based on actual utilization. Because FPGA timing depends on routing, speed grade, and I/O placement, system-level validation should include post-place-and-route timing analysis rather than relying only on estimated clock frequencies. This page combines the device architecture, package constraints, order-code differences, practical replacement criteria, and engineering-oriented comparisons that help designers distinguish a true pin-compatible substitution from an FPGA that merely offers similar logic capacity.

RFQ İletişim
XC6SLX25T-3CSG324I - 24051-Cell Spartan-6 LXT FPGA | AMD
XC6SLX25T-3CSG324I

XC6SLX25T-3CSG324I - 24051-Cell Spartan-6 LXT FPGA | AMD

The AMD XC6SLX25T-3CSG324I is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, 190 I/O sites, and a -3 performance grade, housed in a 324-pin CSBGA package. It uses 45 nm FPGA technology and supports a 1.2 V core supply. The device combines programmable logic, block RAM, dedicated DSP resources, and selectable I/O standards in one reconfigurable semiconductor package. An FPGA is a programmable digital integrated circuit whose logic fabric, interconnect, and peripheral blocks are configured by a bitstream after manufacturing. In the product hierarchy, an FPGA belongs to programmable logic devices and broader integrated circuits. Unlike a fixed-function ASIC, the same FPGA package can support different interface combinations, control logic, digital signal processing, and acceleration functions when the design is changed and reloaded. The XC6SLX25T-3CSG324I provides 24,051 logic cells and 190 I/O locations in a compact 324-ball CSPBGA package. Its -3 suffix identifies the highest-performance grade in the Spartan-6 LXT speed range, while the I suffix identifies the industrial temperature grade. The 1.2 V core architecture targets designs requiring substantial parallel processing without the power and complexity of a hardwired ASIC implementation. The device is suitable for parallel datapaths, protocol conversion, image and signal processing, embedded control, and accelerator logic. Its large I/O count allows connections to parallel memory, external buses, converters, and custom interfaces, while programmable logic supports simultaneous operation of multiple channels. The 45 nm process generation and 1.2 V core supply are important when evaluating system power, switching activity, and thermal performance. Typical applications include industrial control systems, communications equipment, test and measurement instruments, embedded vision, and high-throughput data-acquisition systems. In these applications, designers can implement parallel filtering, protocol engines, control loops, or sensor-processing functions in a single device. A multi-boot or configuration architecture can also support field updates when configuration storage and board-level design provide suitable capacity. When laying out the board, preserve the CSBGA-324 escape-routing geometry, provide the required configuration interface, and validate every power rail against the AMD Spartan-6 data sheet. Pin-compatible substitutions must be checked for speed grade, temperature grade, resource availability, configuration behavior, and timing closure before production use. This page combines package, resource, temperature-grade, and drop-in replacement information with practical PCB and selection guidance. It helps engineers identify whether a same-density Spartan-6 device can be substituted without changing the 324-ball footprint while still distinguishing meaningful speed, grade, and qualification differences.

RFQ İletişim
XC6SLX25T-3FG484I - 24,051-Cell Spartan-6 LXT FPGA | AMD
XC6SLX25T-3FG484I

XC6SLX25T-3FG484I - 24,051-Cell Spartan-6 LXT FPGA | AMD

AMD XC6SLX25T-3FG484I is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, 250 I/O, a 500 MHz internal frequency, and a 1.2 V core supply in a 15 x 15 mm lead-free FBGA package. The -3 speed grade provides the highest performance among the listed Spartan-6 LX speed grades, while the I suffix identifies the industrial-temperature ordering option. An FPGA is a programmable semiconductor in which configurable logic blocks, memory, and I/O resources are interconnected by programmable routing. A field-programmable gate array therefore sits within the broader semiconductor hierarchy, but unlike a fixed-function application-specific integrated circuit, its behavior can be changed by loading a bitstream after manufacturing. The Spartan-6 LXT family is positioned for cost-sensitive designs requiring moderate logic density, embedded memory, and high-speed serial connectivity. The XC6SLX25T-3FG484I provides 24,051 logic cells, 958,464 bits of distributed memory, and 250 I/O in the ordering identified by the product listing. Its 500 MHz internal frequency supports clocked digital logic, interface bridging, control processing, and signal-generation systems. The -3 designation selects the highest-performance Spartan-6 LX speed option listed in the product documentation, making this device useful when timing margin is more important than minimizing unit cost. The device combines programmable logic, dedicated block RAM, digital signal processing resources, programmable I/O standards, and serial transceivers in one package. Its 1.2 V core operation and 500 MHz internal clock support modern FPGA timing architectures, while the 250 available I/O allow external memory, data converters, communications links, and control peripherals to be connected without adding a separate programmable device. Typical applications include industrial control, instrumentation, test and measurement, embedded video, communications infrastructure, and high-speed interface aggregation. The Spartan-6 LXT architecture is especially appropriate when moderate logic capacity must coexist with high-speed serial links and enough parallel I/O for external control or data-acquisition circuitry. The most important design consideration is package and pinout verification. Published listings identify the physical package as a 15 x 15 mm, 0.80 mm-pitch lead-free FBGA, while one specification source reports 324 pins despite naming the 484-BBGA configuration. Use the official AMD Spartan-6 package pinout file before assigning power, ground, configuration, clock, and user I/O connections. This product summary consolidates the ordering information, resource quantities, package characteristics, available drop-in candidates, and PCB implementation considerations needed to evaluate the XC6SLX25T-3FG484I before beginning a hardware design.

RFQ İletişim
XC6SLX25T-3FGG484C - 24K Spartan-6 FPGA | AMD
XC6SLX25T-3FGG484C

XC6SLX25T-3FGG484C - 24K Spartan-6 FPGA | AMD

The AMD XC6SLX25T-3FGG484C is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, a -3 performance grade, a 500 MHz internal frequency, and a 484-BBGA package. The device uses 45 nm CMOS technology and a 1.2 V supply, combining programmable logic, block RAM, DSP48A1 processing elements, and GTP high-speed transceivers in one integrated FPGA. An FPGA is a reconfigurable digital semiconductor in which interconnected programmable logic blocks implement functions that would otherwise require multiple conventional logic devices. The Spartan-6 LXT family belongs to the broader FPGA and CPLD hierarchy and combines programmable logic, programmable I/O, embedded memory, DSP processing, and high-speed serial connectivity. This integration allows designers to implement control logic, interfaces, protocol handling, and signal processing on one device. The XC6SLX25T-3FGG484C provides 1,879 configurable logic blocks, 24,051 logic cells, 58 DSP48A1 slices, and 4 GTP transceivers. Its listed maximum clock frequency is 862 MHz, while the device specification lists a 500 MHz internal frequency. The -3 grade is the highest-performance Spartan-6 LX speed option, while the 45 nm CMOS process supports an economical balance of capability, power, and device flexibility. The LXT architecture is differentiated by its combination of configurable logic, DSP48A1 slices, block RAM, and four GTP transceivers. GTP transceivers support high-speed serial connectivity, while DSP48A1 resources handle multiplication, accumulation, filtering, and other DSP-intensive operations. This integration can reduce the number of companion devices and shorten board-level signal paths when a design can use the FPGA’s dedicated processing and serial resources. Typical uses include industrial control, communications equipment, test and measurement systems, embedded video processing, instrumentation, and network-interface designs. A compact 484-BBGA package is especially useful when board space is constrained, although its fine pitch requires careful PCB layout, inspection, and assembly planning. The C temperature suffix and 0 to 85 °C commercial temperature range align with equipment intended for controlled indoor environments. Designers should follow the AMD Spartan-6 package pinout files and the device power-supply guidance when assigning pins and planning decoupling. The 15 mm by 15 mm, 0.80 mm-pitch lead-free package requires escape routing between the BGA balls and board pads. Validate high-speed GTP and clock routing with the appropriate board-level signal-integrity checks. This product overview combines the core device specifications, package characteristics, drop-in family options, and practical implementation considerations into one engineering reference. It is designed to support initial device selection, PCB compatibility checks, and design planning for Spartan-6 LXT systems.

RFQ İletişim
XC6SLX25T-3FGG484I - 24,051-Cell Spartan-6 LXT FPGA | AMD
XC6SLX25T-3FGG484I

XC6SLX25T-3FGG484I - 24,051-Cell Spartan-6 LXT FPGA | AMD

The AMD Xilinx XC6SLX25T-3FGG484I is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, 1,879 logic and configurable logic blocks, 250 user I/O pins, and 958,464 RAM bits. It operates from a 1.14 V to 1.26 V core supply and is packaged in a lead-free 484-pin FBGA with a 23 mm by 23 mm footprint. An FPGA is a programmable semiconductor whose logic, interconnect, memory, and I/O resources are configured after manufacture. The Spartan-6 LXT family combines general-purpose programmable logic with dedicated hardware resources for high-speed serial connectivity. Within the product hierarchy, this device is an FPGA, a reconfigurable digital integrated circuit, and a member of the Spartan-6 LXT platform. The -3 speed designation identifies the performance grade, while the T suffix denotes the Spartan-6 LXT family with its integrated high-speed transceiver resources. Key device characteristics include 24,051 logic cells, 1879 CLBs, 958,464 total RAM bits, 250 user I/O pins, and an internal frequency listed as 500 MHz. The device uses 45 nm CMOS technology and accepts a core supply range of 1.14 V to 1.26 V. The XC6SLX25T integrates programmable logic with block RAM and serial transceiver capabilities, allowing one device to implement control logic, packet interfaces, signal conditioning, and data processing. Its 484-pin FBGA package provides a high pin count for parallel and high-speed connectivity, while the 0-to-85 °C industrial-temperature rating supports industrial and commercial system environments. Typical uses include industrial automation, communication equipment, test and measurement systems, embedded video processing, and networked control platforms. The LXT resources are particularly useful where a design must combine parallel logic with high-speed serial links while keeping the implementation within a single programmable device. PCB design requires careful power-plane distribution, decoupling, via placement, and high-speed routing. Designers should use the AMD package pinout files and device-specific guidance when assigning every ball, configuring differential pairs, and validating the selected I/O standard against the board-level topology. This page combines device specifications, lifecycle and sourcing information, package details, practical implementation guidance, and same-footprint replacement analysis. It also identifies the engineering differences that matter when comparing speed grades, temperature ratings, and Spartan-6 LXT device options.

RFQ İletişim
XC6SLX25T-4CSG324C - 24K Logic FPGA | Xilinx | 324-CSPBGA
XC6SLX25T-4CSG324C

XC6SLX25T-4CSG324C - 24K Logic FPGA | Xilinx | 324-CSPBGA

The Xilinx XC6SLX25T-4CSG324C is a Spartan-6 LXT field-programmable gate array with 24,051 logic elements, 190 I/O pins, and 958,464 RAM bits in a 324-CSPBGA package. It operates from a 1.14 V to 1.26 V supply range and is positioned for embedded systems requiring programmable logic, high-speed serial connectivity, and extensive parallel I/O. The device belongs to the Spartan-6 FPGA family, combining configurable logic blocks, programmable memory, dedicated DSP resources, clock management, and SelectIO capability on one reconfigurable device. An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior are defined after manufacture through a configuration bitstream. Within the product hierarchy, the XC6SLX25T-4CSG324C is an FPGA, a programmable-logic device within integrated circuits, and a member of the Spartan-6 LXT product family. This integration allows one device to replace multiple fixed-function logic components while supporting field updates and product differentiation. The principal device resources include 24,051 logic elements, 1,879 logic array blocks and configurable logic blocks, 190 I/O pins, and 958,464 RAM bits. Its -4 speed designation identifies the intended performance class, while the CSG324C suffix identifies the commercial-temperature, 324-ball CSPBGA configuration. The 15 mm by 15 mm, 0.80 mm-pitch package supports dense surface-mount integration where a large programmable I/O count and compact board area are important. Spartan-6 LXT devices integrate dedicated resources for demanding embedded applications. The family includes DSP48A1 processing slices, block RAM, enhanced mixed-mode clock management blocks, SelectIO technology, power-optimized high-speed serial transceivers, PCI Express-compatible endpoint blocks, and multiple configuration options. Device DNA and AES-protected IP security support add configuration security and identification capabilities for designs that require controlled intellectual-property deployment. Typical uses include industrial control gateways, networked communications equipment, embedded data-acquisition systems, instrumentation, image-processing modules, and compact embedded computing platforms. The large I/O count allows the device to connect processors, memories, sensors, transceivers, and display or communications peripherals. Its programmable architecture also permits field updates, reduced component count, and hardware revision flexibility when system requirements evolve. PCB implementation requires careful attention to the 0.80 mm-pitch BGA escape routing, power distribution, decoupling, configuration-interface integrity, and thermal performance. Use the AMD package pinout files and Spartan-6 data sheet to assign every ball and power plane correctly. Configuration storage, startup behavior, bank voltage compatibility, and signal-transition limits should be reviewed before schematic and PCB signoff. This product page consolidates the verified device resources, family-level alternatives, package details, and implementation guidance into an engineering-focused reference. It also distinguishes documented package and device facts from parameters that require a direct check against the relevant AMD data sheet, selection guide, and package documentation before a new design is released for production.

RFQ İletişim
XC6SLX25T-4FGG484C - Spartan-6 LXT 24,051-Cell FPGA | Xilinx
XC6SLX25T-4FGG484C

XC6SLX25T-4FGG484C - Spartan-6 LXT 24,051-Cell FPGA | Xilinx

The Xilinx XC6SLX25T-4FGG484C is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, 250 I/O pins, and 958,464 bits of block RAM in a 484-ball FBGA package. It is manufactured on a 45 nm process and operates from a 1.2 V core supply, with the commercial-grade part specified for 0°C to 85°C ambient operation. The -4 suffix identifies its Spartan-6 performance grade, while FGG484 identifies the 484-ball fine-pitch BGA package. An FPGA is a programmable digital logic device that replaces a combination of fixed-function gate arrays, interface controllers, and programmable glue logic. Within the semiconductor hierarchy, the XC6SLX25T-4FGG484C belongs to the Spartan-6 LXT FPGA family, a programmable-logic category combining configurable logic blocks, embedded block RAM, programmable I/O, and dedicated digital signal processing resources. Its large 484-ball package also exposes high-speed serial and parallel interfaces for communications and industrial-control equipment. Key device attributes include 1,879 configurable logic blocks, 24,051 logic cells, 250 user I/O, and 958,464 total RAM bits. The 45 nm fabrication process supports a compact, high-performance implementation of parallel logic, memory, and dedicated serial transceivers. The LXT variant is intended for designs that need more connectivity than basic Spartan-6 LX devices while retaining the low-power programmable-logic architecture. Typical uses include industrial Ethernet interfaces, data acquisition systems, video-processing pipelines, communications equipment, and embedded control platforms. The 250 I/O count supports external memory, parallel sensors, display controllers, and high-speed transceiver connections. Because the device uses a fine-pitch 484-ball BGA, its usefulness depends on multilayer PCB routing capability, controlled power delivery, and assembly processes capable of handling the package pitch. A critical design consideration is that a faster or differently temperature-graded Spartan-6 LXT part must be checked against the original schematic, pinout, configuration design, and power-budget assumptions. The AMD Spartan-6 package pinout files remain the controlling reference for land patterns, ball assignments, and board-layout verification before a substitution is approved.

RFQ İletişim
XC6SLX25T-N3FG484C - 24K Logic Cell FPGA | AMD
XC6SLX25T-N3FG484C

XC6SLX25T-N3FG484C - 24K Logic Cell FPGA | AMD

The Advanced Micro Devices XC6SLX25T-N3FG484C is a Spartan-6 LXT field-programmable gate array with 24,051 logic cells, 250 I/O, and a 484-BBGA package. It uses 45 nm technology, operates from a 1.2 V core supply, and is identified with the -N3 performance and temperature grade. The device combines programmable logic, dedicated DSP resources, block RAM, and selectable I/O standards in a single surface-mount package. An FPGA is a semiconductor whose digital logic is configured after manufacture, allowing one board design to support multiple functions. The Spartan-6 LXT family occupies the middle ground between low-cost Spartan-6 LX devices and larger Spartan-6 devices requiring greater I/O or processing resources. The XC6SLX25T-N3FG484C targets designs needing more logic, memory, and signal-processing capacity than the base Spartan-6 LX family while retaining a 484-ball package option. Key device attributes include 24,051 logic cells, 250 user I/O, 45 nm fabrication technology, and a 1.2 V core voltage. The T designation identifies the LXT device with DSP resources, while the N3 suffix identifies the relevant performance and temperature grade. The 484-BBGA package provides a high-density interconnect for demanding control, communications, signal-processing, and embedded-system designs. The Spartan-6 architecture supports programmable logic, block RAM, DSP slices, and configurable high-speed I/O. This allows designers to implement parallel datapaths, control logic, packet processing, video pipelines, and hardware acceleration in one device. Because configuration determines the implemented function, the same FPGA can support different firmware or bitstream revisions across product variants without changing the PCB. Typical applications include industrial control, networked communications equipment, test and measurement systems, video and image processing, instrumentation, and embedded signal-processing platforms. The -N3 grade is appropriate when the design requires the specified N3 operating characteristics and industrial temperature range. The large ball count also supports designs requiring numerous differential, high-speed, and general-purpose I/O connections. PCB implementation must follow the AMD Spartan-6 package pinout and board-design guidance because a 484-BBGA footprint is sensitive to solder-paste volume, reflow profile, via-in-pad construction, and escape-routing geometry. Differential and high-speed pairs should be routed with controlled impedance and continuous reference planes. Configuration interfaces, power rails, decoupling networks, and JTAG access should be planned before signal routing begins. This product record combines the exact orderable MPN, package information, density details, and speed-grade identity with practical configuration and layout considerations. It also distinguishes the closest orderable variants by package and performance suffix, helping engineers verify footprint compatibility, environmental requirements, and procurement configuration before releasing a design to manufacturing.

RFQ İletişim
XC6SLX4-2CPG196C - 3,840-Cell Spartan-6 FPGA | AMD
XC6SLX4-2CPG196C

XC6SLX4-2CPG196C - 3,840-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX4-2CPG196C is a Spartan-6 LX field-programmable gate array with 3,840 logic cells, 106 I/O, 196 CSBGA balls, and 45 nm CMOS technology in a 1.2 V device. It is packaged as a 196-TFBGA/CSBGA and is identified by the -2 speed grade and C commercial temperature designation. The device also provides 221,184 registers and 216 Kb block RAM according to the verified product search data. A field-programmable gate array, or FPGA, is a programmable digital semiconductor in which logic, memory, and I/O behavior are configured through a bitstream after manufacture. The Spartan-6 LX FPGA family is intended for compact embedded systems requiring deterministic parallel logic, programmable I/O, and moderate on-chip memory. The XC6SLX4-2CPG196C therefore sits between fixed-function logic and higher-capacity programmable-logic devices. The verified data identifies the part as a Spartan-6 LX FPGA with 106 I/O, 3,840 logic cells, 196-CSBGA packaging, 1.2 V operation, and 45 nm CMOS technology. The device also includes 8 DSP slices and up to 3.2 Gbps transceiver performance in the supplied comparison source. These characteristics make it suitable for embedded control, industrial automation, communications, instrumentation, and compact signal-processing designs. The -2 suffix is a speed-grade designation, while the C suffix identifies the commercial temperature option according to the part naming convention reflected in the search results. The 196-CSBGA package provides a high ball count for dense I/O and power distribution, but it requires careful PCB layout, via-in-pad or escape routing strategies, and thermal planning. Configuration, programming, and tool support must be checked against the selected system design before releasing a production layout. For new designs, engineers should verify the complete pinout, supported I/O standards, configuration requirements, and power-supply sequencing in the manufacturer datasheet. The BGA package makes fanout and assembly inspection more demanding than a leaded package, so PCB fabrication and assembly capability should be confirmed early. This page consolidates verified distributor results, a real part price observation, package information, and design-oriented selection guidance. It does not infer missing electrical limits, timing values, lifecycle guarantees, or compliance claims that were not present in the supplied data.

RFQ İletişim
XC6SLX4-2CPG196I - 3840-Cell Spartan-6 LX FPGA | AMD
XC6SLX4-2CPG196I

XC6SLX4-2CPG196I - 3840-Cell Spartan-6 LX FPGA | AMD

Advanced Micro Devices, Inc. XC6SLX4-2CPG196I is a Spartan-6 LX field-programmable gate array with 3840 logic cells, 300 configurable logic blocks, 106 I/O, and a 667 MHz stated performance figure in a 196-pin CSBGA package. The device is manufactured on 45 nm CMOS technology and uses a 1.2 V core supply, combining programmable logic, fixed hard blocks, and high-speed serial transceivers in a single integrated circuit. Its 196-TFBGA or CSBGA package provides 196 package contacts and supports compact embedded systems requiring substantial programmable logic without the footprint of a larger FPGA. An FPGA is a semiconductor whose digital function is configured after manufacture through programmable logic, block RAM, digital signal processing resources, and I/O. Within the product hierarchy, the XC6SLX4 belongs to the Spartan-6 LX FPGA family, which sits between fixed-function logic devices and higher-density programmable systems. Its 3840 logic cells make it suitable for control logic, communication bridges, instrumentation, industrial automation, embedded video processing, and general-purpose parallel processing. The XC6SLX4-2CPG196I provides 106 I/O, 300 configurable logic blocks, 3840 logic cells, a 1.2 V core voltage, and 45 nm CMOS fabrication technology. The -2 device designation identifies its speed grade, while the I suffix identifies the industrial temperature grade. These options make the MPN suitable for designs requiring a defined industrial temperature qualification rather than the commercial-temperature version. Spartan-6 devices integrate configurable logic with block RAM, DSP resources, clock-management functions, and multi-gigabit transceivers. That combination allows designers to implement parallel datapaths, protocol state machines, control systems, and signal processing in a programmable device. Exact RAM, DSP, transceiver, voltage, and timing values were not supplied in the retrieved data and must be confirmed in the manufacturer datasheet before final design release. Typical applications include industrial factory automation, sensor aggregation, low-speed and medium-speed communication gateways, test and measurement instruments, embedded control systems, and compact edge-processing nodes. The 106 I/O count supports interfaces to sensors, converters, memories, transceivers, and human-interface circuitry, while the 3840 logic cells allow parallel algorithms and control functions to coexist. PCB design should use the AMD Spartan-6 package pinout files for the 196-CSBGA footprint and verify power, ground, configuration, clock, and transceiver connections before layout release. Because the 0.5 mm-pitch package is assembly-sensitive, land pattern, solder-mask, stencil, reflow, and via-in-pad decisions should follow the applicable AMD package guidance. This page consolidates the verified device identity, package details, source links, commercial availability information, and same-family replacement analysis. It also distinguishes confirmed facts from parameters that remain to be checked in the manufacturer datasheet, helping engineers avoid assuming unverified FPGA resource or timing specifications.

RFQ İletişim
XC6SLX4-2CSG225C - 3840-Cell Spartan-6 FPGA | AMD
XC6SLX4-2CSG225C

XC6SLX4-2CSG225C - 3840-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX4-2CSG225C is a Spartan-6 LX field-programmable gate array with 3840 logic cells, 132 I/O, a 45 nm CMOS process, and a 225-CSBGA package. It targets cost-sensitive, high-volume embedded systems that need programmable logic, parallel interfaces, control functions, and modest signal-processing capability. The part is identified as a 225-LFBGA/CSPBGA package in distributor listings, while the exact CSG225 package terminology should be confirmed against the AMD package documentation. What is an FPGA? An FPGA is a programmable semiconductor whose configurable logic blocks, programmable I/O, memory resources, and dedicated hardware can be tailored after manufacture. An FPGA sits above fixed-function digital ICs in the design hierarchy: instead of requiring a new mask for every logic change, engineers can implement control, interface, timing, and signal-processing functions in one reconfigurable device. The Spartan-6 LX family is positioned for high-volume applications where system integration and cost matter more than the very highest device density. The XC6SLX4-2CSG225C is reported with 132 I/O and 3840 logic cells. Its 45 nm CMOS implementation is relevant to power, switching activity, and tool-supported timing closure. The 225-CSBGA package provides a high pin-count surface-mount option for designs requiring substantial external connectivity. Detailed block counts, memory quantities, I/O standards, voltage limits, temperature grades, and timing constraints are not fully present in the supplied search snippets and must be obtained from the AMD Spartan-6 documentation before release. Typical uses include industrial automation, programmable control, communications equipment, instrumentation, and embedded signal-processing systems. In these applications, the FPGA can implement protocol interfaces, state machines, sampling pipelines, timing controllers, or parallel-to-serial conversion. The design still requires correct bank voltage planning, I/O-standard assignment, clocking, decoupling, programming, and thermal assessment. A pin-compatible replacement cannot be assumed merely because another FPGA has similar resource counts; package ballout, voltage standards, configuration memory, clock resources, and timing margins must all match. This page is limited to values explicitly supported by the supplied verified web data. It distinguishes documented facts from missing design data rather than estimating FPGA specifications, pricing, pin assignments, or electrical limits. Check the current AMD product documentation and authorized distribution records before committing a new PCB or production release.

RFQ İletişim
XC6SLX4-2CSG225I - 3840-Cell Spartan-6 FPGA | AMD
XC6SLX4-2CSG225I

XC6SLX4-2CSG225I - 3840-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX4-2CSG225I is a Spartan-6 LX field-programmable gate array with 3,840 logic cells, 132 I/O, a maximum stated frequency of 375 MHz, and a 225-CSBGA package. It is manufactured on 45 nm CMOS technology and supports a stated 1.14 V to 1.26 V operating range. The -2 designation identifies the device speed grade, while the I suffix denotes the industrial temperature option. What is an FPGA? A field-programmable gate array is a programmable semiconductor containing configurable logic, memory, and I/O resources. An FPGA replaces application-specific digital logic with a flexible hardware implementation that can be loaded, verified, and revised. The Spartan-6 LX family is positioned for cost-sensitive embedded, industrial, communications, and bridging applications where deterministic parallel logic is useful. Key features of the XC6SLX4 include 3,840 logic cells and 132 I/O. The verified product information also identifies DCM and PLL resources and a 375 MHz frequency value. The 225-CSBGA package supports compact system integration, while the industrial-temperature marking makes the device relevant to equipment expected to operate beyond commercial-temperature conditions. The device is built on 45 nm CMOS technology and belongs to the Spartan-6 FPGA family. Its architecture combines programmable logic with dedicated FPGA resources, allowing designers to implement control logic, interfaces, data processing, and signal conditioning in one device. The -2 speed grade and stated 375 MHz figure should be evaluated against the actual timing constraints of the selected design. Typical applications include industrial automation, automotive infotainment, consumer equipment, embedded control, communications bridging, interface conversion, and general-purpose digital signal processing. The Spartan-6 LX positioning supports low-cost, high-volume systems that benefit from hardware programmability and parallel processing. A key design consideration is package-level planning. Before assigning pins, engineers should use the AMD Spartan-6 package device pinout files and verify power, ground, configuration, clock, and I/O constraints for the CSG225 package. Bitstream compatibility, device identification, memory initialization, and temperature grade must also be confirmed before a replacement is approved.

RFQ İletişim