Entegre Devreler

DSPIC33EP128GM604-H/ML

DSPIC33EP128GM604-H/ML - 70 MIPS DSC 128KB Flash QFN-44 | Microchip

The Microchip Technology DSPIC33EP128GM604-H/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 70 MIPS performance with 128KB (43K x 24) FLASH and 16KB RAM, housed in a 44-pin QFN (8x8 mm) package rated for -40C to +125C operation. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control-oriented architecture of a microcontroller. Within the embedded hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs: it executes DSP instructions (MAC, DSP multiply, barrel shifter) while retaining Harvard memory architecture, deterministic interrupts, and rich motor-control peripherals. The dsPIC33E family from Microchip is a widely adopted DSC platform for precision embedded control. Key features include a 70 MIPS dsPIC DSC core, two independent ADC modules configurable as 10-bit 1.1 Msps with four sample-and-hold circuits or 12-bit 500 ksps, and up to four op amps/comparators with direct ADC connection. On-chip peripherals also include high-speed PWM, CAN, multiple UART/SPI/I2C ports, quadrature encoder interface inputs, and four DMA channels, enabling single-chip control of complex power and motion systems. Architecturally, the dsPIC33EP core uses CMOS technology with a 16-bit modified Harvard pipeline, DSP multiply-accumulate hardware, and 8 hardware breakpoints for deterministic debugging. The dual-ADC design allows simultaneous sampling of motor phase currents and bus voltages without arbitration delays, a significant advantage in field-oriented motor control loops. Typical applications include brushless DC and PMSM motor control, digital power conversion (PFC, LLC), automotive auxiliary systems (the -H temperature grade supports 125C ambient), and industrial sensing front-ends exploiting the integrated op amps and high-speed ADCs. A key design consideration: the QFN-44 exposed-pad package requires a solid ground plane with thermal vias under the pad for both thermal dissipation and signal integrity at 70 MIPS switching speeds. This page synthesizes distributor pricing context, drop-in family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim

DSPIC33EP128GM604-I/ML

DSPIC33EP128GM604-I/ML - 70 MIPS DSC, 128KB Flash, 44-QFN | Microchip

The Microchip Technology DSPIC33EP128GM604-I/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC33EP family, integrating a 70 MIPS dsPIC DSC core with DSP engine and enhanced on-chip peripherals in a 44-pin QFN (8x8 mm) package. The device pairs a 16-bit modified Harvard architecture with single-cycle MAC and barrel shifter, executing at 70 MIPS from a 60 MHz system clock. A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt response and peripheral integration of a microcontroller with the hard real-time signal-processing throughput of a Digital Signal Processor (DSP). The dsPIC33EP family implements the DSC concept on a 3.3V CMOS process with a 16-bit data path, dual 40-bit accumulators, and a single-cycle 16x16 MAC. In the broader taxonomy, a DSC sits between a microcontroller (MCU) and a Digital Signal Processor (DSP), under the power-management and embedded-control hierarchy that includes motor-control specific variants. Key features include 128 KB Flash program memory with ECC, 16 KB SRAM, a 12-bit ADC at up to 1.1 Msps with up to 18 analog channels, four op-amps and four comparators on-chip, two 12-bit DACs, a 16-bit PWM with 8/8 PWM channels, two quadrature encoder interfaces (QEI), four DMA channels, and a CAN 2.0B module. The CPU runs at 70 MIPS (60 MHz) with a 33 ns instruction cycle. The device integrates 4 operational amplifiers configurable as inverting or non-inverting gain blocks, eliminating external analog front-end components. With 12-bit ADC throughput at 1.1 Msps and dedicated PWM channels with complementary mode, dead-time control, and 7.5 ns PWM resolution, the architecture targets high-precision motor control and digital power conversion loops. Typical applications include field-oriented control (FOC) of 3-phase PMSM and BLDC motors, single- and multi-shunt current sensing for sensorless drives, digital switched-mode power supplies, photovoltaic inverters, and CAN-connected industrial automation nodes. The on-chip op-amps directly interface to shunt resistors, reducing BOM and PCB area. When designing with this device, leave sufficient ground copper under the exposed pad (EP) for thermal dissipation - the EP must be soldered to the PCB thermal land to meet datasheet thermal specifications. Allocate at least four 25 µm x 25 µm thermal vias in the EP land to a bottom-side copper pour. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical PCB-layout guidance not found in the manufacturer datasheet alone.

RFQ İletişim

DSPIC33EP128GM604-I/PT

DSPIC33EP128GM604-I/PT - 16-Bit 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EP128GM604-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family that delivers 70 MIPS performance with 128 KB (43K x 24) of Flash program memory, 16 KB of RAM, and a 44-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the compute power of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the embedded processor hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred architecture for closed-loop control systems such as field-oriented motor control, digital power conversion, and sensor signal processing, where both fast multiply-accumulate (MAC) math and rich peripherals are required in a single chip. Key features of the DSPIC33EP128GM604-I/PT include the 70 MIPS dsPIC33E core, dual on-chip operational amplifiers (OpAmps), Motor Control PWM with up to 8 output-compare/PWM channels, 4 quadrature encoder interface (QEI) inputs, and connectivity spanning CANbus, I2C, SPI, UART/USART, IrDA, and LINbus. The Mouser listing summarizes the peripheral mix as 128 KB, 16 KB RAM, 12-bit ADC, 8/8 IC/OC, and dual OpAmps. Technically, the dsPIC33E core provides DSP instruction extensions including a barrel shifter, modulo and bit-reversed addressing, and single-cycle MAC operations with a 24-bit instruction word. Peripherals include DMA, I2S audio, brown-out detect/reset, power-on reset, watchdog timer, and motor-control PWM modules, enabling designers to offload real-time tasks from software. Flash program memory uses a 24-bit width, and the device is fabricated in CMOS process technology. Typical applications include precision brushless DC (BLDC) and PMSM motor control with sensor feedback via QEI, digital power supplies and inverters, CAN-networked industrial nodes, and audio/I2S processing. The dual OpAmps allow current-sense amplification on-chip, reducing external component count in motor drive designs. A key design consideration is clock selection: the maximum external clock frequency cited is 60 MHz (yielding 70 MIPS via the internal PLL), so layout and crystal placement should follow Microchip's oscillator guidelines, and all VDD/VSS pairs must be decoupled and connected. This page synthesizes distributor pricing context, drop-in alternatives from the same family, and practical design notes not found in the manufacturer datasheet, providing an information gain for sourcing and selection engineers.

RFQ İletişim

DSPIC33EP128GM604T-I/ML

DSPIC33EP128GM604T-I/ML - 70 MIPS 16-bit DSC, 128KB Flash | Microchip

The Microchip DSPIC33EP128GM604T-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 128KB (43K x 24) of Flash program memory, 16KB of RAM, and a rich motor-control peripheral set, all housed in a 44-pin QFN (ML) surface-mount package. A digital signal controller combines the computational core of a microcontroller with DSP-style multiply-accumulate hardware, single-cycle MAC, and DSP addressing modes. Within the power-management hierarchy of embedded processors, a DSC sits between general-purpose MCUs and dedicated DSPs, making it the natural choice for closed-loop control systems that need both fast math and deterministic I/O behavior. Key differentiating features include twelve motor-control PWM channels (12 MCPWM) with complementary outputs and dead-time control, eight input capture and eight output capture/compare channels, two quadrature encoder interfaces (QEI), four integrated operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing, and a Pattern Generator (PTG) for autonomous sequencing. A Controller Area Network (CAN) module supports automotive and industrial networking. The dsPIC33EP core is pipelined and engineered for single-cycle DSP instructions at 70 MIPS, allowing FOC (field-oriented control) loops and digital filters to execute well within PWM periods. Flexible clocking with internal PLL removes the need for an external crystal in cost-sensitive designs. Typical applications include brushless DC and PMSM motor drives, digital power conversion (PFC, LLC), sensorless FOC compressors, and industrial automation nodes that combine CAN communication with real-time control. For design, decouple all VDD/VDDCORE pins with 0.1uF ceramics placed at the pin, and budget Flash/RAM margins before selecting the 128KB density versus the 64KB/256KB family members in the same 44-QFN footprint. This page synthesizes distributor pricing tiers, drop-in family alternatives, design notes, and comparison data not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128GM706-E/PT

DSPIC33EP128GM706-E/PT - 16-bit 60 MIPS DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128GM706-E/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS from 128KB (43K x 24) of Flash program memory and 16KB of RAM, housed in a 64-pin TQFP (10x10 mm) package with extended temperature operation. A digital signal controller combines the control peripherals of a microcontroller with the math engine of a DSP on a single chip. In the semiconductor hierarchy, the dsPIC33EP sits between general-purpose 16-bit MCUs (such as the PIC24 family) and dedicated DSPs, making it a power-management-friendly choice for embedded control loops that need fast multiply-accumulate operations without the complexity of an external DSP. Key features include the dsPIC33E core executing 16-bit instructions with DSP multiply-accumulate support, 3.3V operation, two on-chip operational amplifiers, 8 capture/8 compare channels, 4 quadrature encoder interfaces (QEI), 2 CAN modules for industrial networking, and multiple UART/SPI/I2C serial ports. The -E suffix grades the device for extended ambient temperatures up to +125C, above the industrial -I grade limit of +85C. Architecturally, the device uses a Harvard bus structure with separate program and data paths, supporting simultaneous instruction fetch and operand access that sustains the 60 MIPS rating across a 3.3V supply. Flash program memory is self-programmable for field updates, and the family shares pin-compatible packaging across memory tiers, which simplifies BOM migrations from 64KB or 256KB variants. Typical applications include precision brushless DC and PMSM motor control (using the QEI inputs, PWM compares, and on-chip op-amps for current sensing), automotive auxiliary systems rated for elevated ambient temperature, digital power supplies and PFC stages, and industrial control nodes leveraging the dual CAN buses. A key design consideration is power supply quality: like all dsPIC33EP devices, this controller requires its dedicated VDD/VSS pairs, VCAP and VDDCORE decoupling per the manufacturer datasheet, and PGECx/PGEDx pairs must be routed as matched pairs for ICSP programming. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128GM706-H/PT

DSPIC33EP128GM706-H/PT - 16-Bit 70 MIPS DSC, 128KB Flash | Microchip

The Microchip DSPIC33EP128GM706-H/PT is a 16-bit dsPIC33E digital signal controller (DSC) delivering 70 MIPS from its dsPIC DSC core, with 128KB (43K x 24) of FLASH program memory, 3.3V operation, and AEC-Q100 automotive qualification, housed in a 64-pin TQFP (10x10 mm) tray package. A digital signal controller combines the compute characteristics of a 16-bit microcontroller with the arithmetic throughput of a DSP. In the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs in signal-processing capability: it executes single-cycle MAC and DSP instructions, integrates high-resolution PWM peripherals, and offers on-chip analog such as ADCs and operational amplifiers, making it a single-chip solution for closed-loop control systems. Key features of the DSPIC33EP128GM706-H/PT include the 70 MIPS dsPIC33E core, 128KB of self-programmable FLASH, on-chip operational amplifiers for current sensing, CAN bus connectivity, and a rich motor-control peripheral set including PWM and quadrature encoder interface support. The -H temperature grade supports the automotive -40C to +150C operating range, backed by AEC-Q100 qualification for harsh-environment reliability. Technically, the dsPIC33E family pairs the Harvard-architecture CPU with an integrated DSP engine providing 40-bit wide accumulators, single-cycle MAC, and dual operand fetch. Enhanced peripherals such as the motor control PWM module, input capture, output compare, and high-speed ADC allow direct sensor and gate-driver interfacing, reducing external component count and loop latency in precision motor drives. Typical applications include precision motor control for industrial drives and appliances, digital power supplies and solar inverters, and automotive body or powertrain subsystems. The 70 MIPS throughput and hardware DSP instructions suit FOC (field-oriented control) motor algorithms, while the CAN interface supports in-vehicle networking. For design, remember that all VDD/VSS pairs must be decoupled, and ICSP programming requires matching a PGECx/PGEDx pair; if PGEC2 is used for ICSPCLK, PGED2 must be used for ICSPDAT. Operating above 3.6V supply violates absolute maximum ratings. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim

DSPIC33EP128GM706-I/MR

DSPIC33EP128GM706-I/MR - 70 MIPS 16-bit DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GM706-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 128KB (43K x 24) of Flash program memory and 16KB of RAM, housed in a 64-pin VQFN (9x9 mm, MR) package with exposed pad, operating from 3.3V (3.0V to 3.6V) over an industrial temperature range of -40C to +85C. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control-oriented architecture of a microcontroller. In the product hierarchy, the dsPIC33EP128GM706 sits within the dsPIC33EP family of DSCs, under 16-bit microcontrollers and the broader semiconductor MCU/DSP category. DSCs are the preferred choice for closed-loop control systems that require fast math on sampled data, such as field-oriented motor control and digital power conversion. Key features include a 70 MIPS dsPIC DSC core with DSP engine (17-bit x 17-bit single-cycle MAC, 40-bit wide accumulator), dual 12-bit 500 ksps ADC modules supporting simultaneous multi-channel sampling, up to 12 MCPWM channels for motor control, 8 input capture and 8 output compare channels, 2 quadrature encoder interfaces (QEI), CAN 2.0B and multiple UART/SPI/I2C ports, integrated operational amplifiers, 4 DMA channels, and hardware real-time debugging with boundary scan support. Architecturally, the device uses a modified Harvard 16-bit pipeline with separate program and data buses, a barrel shifter, and hardware loop constructs that sustain single-cycle MAC throughput. The 3.3V CMOS process keeps active current low while supporting an internal fast RC oscillator and PLL for full 70 MIPS operation without an external crystal. Typical applications include brushless DC and PMSM motor drives (using the MCPWM, QEI, and op-amp peripherals), digital power supplies such as PFC and LLC converters, automotive and industrial CAN network nodes, and general precision sensing with on-chip 12-bit ADC conversion. A key design consideration is power integrity: all VDD/VSS pairs must be decoupled and the exposed pad soldered to a ground plane for thermal and EMC performance. Programming via ICSP requires PGECx/PGEDx pairs used strictly as matched pairs. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found together in the manufacturer datasheet, refreshed as of 2026-09-23.

RFQ İletişim

DSPIC33EP128GM706T-I/MR

DSPIC33EP128GM706T-I/MR - 70 MIPS 128KB DSC | Microchip Technology

The Microchip Technology DSPIC33EP128GM706T-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 70 MIPS performance with 128KB (43K x 24) of Flash program memory and 16KB of RAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. Operating from a 3.0V to 3.6V supply, the industrial-grade (I-temp, -40C to +85C) device integrates a rich motor-control peripheral set: 12-channel motor control PWM (MCPWM), 8 input capture and 8 output compare channels, 2 quadrature encoder interfaces, 4 on-chip operational amplifiers, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). A digital signal controller is a hybrid of a microcontroller (MCU) and a digital signal processor (DSP), combining MCU-style control peripherals, interrupts, and I/O with DSP-engine math capabilities such as a hardware multiply-accumulate unit and barrel shifter. In the power-management hierarchy, DSCs sit above basic MCUs for real-time closed-loop control tasks like field-oriented motor control, digital power conversion, and sensor signal processing. Key differentiators of this part include the 70 MIPS dsPIC DSC core, CAN 2.0B connectivity for industrial and automotive networks, dual QEI modules for servo feedback, and four integrated op-amps that reduce external component count in current-sense and signal-conditioning circuits. The CTMU enables capacitive touch and precise time measurement, while the PTG offloads complex peripheral sequencing from the CPU. The 64-VQFN 9x9 mm exposed-pad package supports surface-mount assembly with good thermal performance, and the T suffix denotes tape-and-reel delivery for automated production lines. Typical applications include precision brushless DC and PMSM motor drives, digital power supplies, industrial automation nodes, and embedded control systems requiring DSP-grade math. Design consideration: the device requires a clean 3.3V rail with proper decoupling on VDDCORE/VCAP for the internal 2.5V core regulator; follow Microchip's layout guidance for the exposed pad connection to ground. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found on the manufacturer product page alone.

RFQ İletişim

DSPIC33EP128GM710-E/BG

DSPIC33EP128GM710-E/BG - 60 MIPS 16-bit DSC, 128KB Flash | Microchip

The Microchip DSPIC33EP128GM710-E/BG is a 16-bit digital signal controller (DSC) from the dsPIC33EP GM710 family, delivering 60 MIPS performance (70 MIPS core capability) with 128KB (43K x 24) of Flash program memory and 16KB of RAM in a 121-ball TFBGA (10x10 mm) package with extended temperature range of -40C to +125C. A digital signal controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes multiply-accumulate (MAC) and DSP instructions in a single cycle while retaining interrupt-driven control peripherals such as PWM modules, quadrature encoders, and motor-control-specific timers. Key features include the 16-bit dsPIC33E Harvard-architecture core with DSP engine, on-chip 3.3V operation (3V to 3.6V supply), dual operational amplifiers, 4 quadrature encoder interfaces, 8 input capture and 8 output compare channels, and multiple serial communication interfaces including CAN. The GM710 variant specifically integrates 2 on-chip op-amps for current-sense amplification, reducing external BOM cost in motor-drive designs. Architecturally, the dsPIC33EP core uses CMOS technology with a pipelined execution unit supporting fixed-point DSP arithmetic at 60 MHz operation. The 43K x 24 instruction-word Flash organization supports an MCU+DSP dual-memory model, and the peripheral ecosystem is shared across the dsPIC33EP family, simplifying firmware migration between memory densities. Typical applications include precision brushless DC and PMSM motor control for industrial drives, automotive subsystems (the device is specified for automotive use per distributor data), digital power conversion, and sensor signal conditioning where the integrated op-amps directly amplify shunt-current signals. When designing with this device, plan the 121-ball BGA layout early: ball-pitch fanout requires at least 4-layer PCB stack-up with via-in-pad or dogbone breakout, and the 3V-3.6V supply range demands a tight regulator tolerance. This page synthesizes distributor pricing, family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim

DSPIC33EP128GM710-E/PF

DSPIC33EP128GM710-E/PF - 16-bit 60 MIPS DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GM710-E/PF is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 60 MIPS performance with 128KB (43K x 24) of Flash program memory, 16KB of RAM, and a 100-pin TQFP (14x14 mm) package in an extended-temperature, AEC-Q100 automotive grade variant. A digital signal controller combines the computational strengths of a microcontroller with the DSP engine of a digital signal processor in a single chip. Within the embedded-systems hierarchy, the dsPIC33EP sits above general-purpose MCUs for math-intensive tasks and below full DSP-plus-MCU two-chip solutions, offering deterministic single-cycle MAC instructions, hardware divide, and DSP-style addressing modes alongside familiar MCU peripherals. Key features of this device include an operating voltage range of 3.0V to 3.6V, 12 channels of motor-control PWM suitable for three-phase inverter drives, 8 input capture and 8 output compare channels, 2 quadrature encoder interfaces, an integrated CAN module for industrial and automotive networking, and 4 on-chip operational amplifiers that reduce external analog component count in current-sensing and signal-conditioning chains. The -E suffix designates the extended automotive temperature range of -40C to +125C and AEC-Q100 qualification, making the part suitable for under-hood and other harsh environments where industrial-grade -I suffix parts are not qualified. The 100-pin TQFP footprint provides abundant general-purpose I/O for complex designs requiring many peripherals active simultaneously. Typical applications include brushless DC and PMSM motor control, digital power conversion (PFC, LLC), automotive body and powertrain auxiliary systems, and industrial drives requiring CAN connectivity and encoder feedback. Design consideration: all VDD and VSS pins must be connected, and PGECx/PGEDx pins must be used as matched pairs for in-circuit programming, per the Microchip family datasheet. This page adds value beyond the datasheet by consolidating distributor pricing, drop-in family alternatives, comparison tables, and practical design notes in one place.

RFQ İletişim

DSPIC33EP128GM710-H/BG

DSPIC33EP128GM710-H/BG - 70MIPS 128KB DSC TFBGA-121 | Microchip

The Microchip Technology DSPIC33EP128GM710-H/BG is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 70 MIPS performance, 128 KB (43K x 24) of Flash program memory and 16 KB of RAM, housed in a 121-ball TFBGA (10x10 mm) package. A digital signal controller combines the compute architecture of a microcontroller with the arithmetic acceleration of a DSP. In the semiconductor hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes deterministic real-time control loops like an MCU while performing high-speed multiply-accumulate operations for filtering, transforms and control algorithms. The dsPIC33EP family implements a modified Harvard architecture with a 16-bit datapath and 24-bit instruction words. Key features of this part include the 70 MIPS dsPIC DSC core with DSP engine, dual on-chip operational amplifiers, a CAN 2.0B module for automotive and industrial networking, multiple UART, SPI and I2C peripherals, quadrature encoder interface (QEI) inputs and motor-control PWM peripherals. Data from distributor listings confirms 12 motor-control channels, 8 input capture and 8 output compare channels, suiting closed-loop motor and power-conversion designs. Technically, the device operates from a single 3.3V supply and is offered in automotive-grade, AEC-Q100-qualified variants. The GM710 variant provides 128 KB Flash; pin-compatible family members extend or reduce memory to fit firmware growth or cost targets within the same 121-TFBGA footprint. Typical applications include precision motor control (BLDC, PMSM, stepper), automotive body and powertrain auxiliary nodes, digital power supplies, industrial automation and sensor signal processing where the integrated op-amps condition signals before the ADC. Design consideration: the TFBGA package requires careful BGA land-pattern design and X-ray-capable inspection in production; the -H temperature variant should be verified against your thermal environment since the -I variant covers a wider range. This page synthesizes distributor availability data, drop-in family alternatives and practical design notes beyond the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128GM710-H/PF

DSPIC33EP128GM710-H/PF - 70 MIPS 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GM710-H/PF is a 16-bit digital signal controller (DSC) from the dsPIC33EP GM710 family, delivering 70 MIPS performance from its dsPIC33E core with 128KB (43K x 24) of Flash program memory, 16KB of RAM, and a 100-pin TQFP (14x14 mm) surface-mount package. A digital signal controller combines the computational throughput of a DSP engine with the peripheral integration and ease of use of a microcontroller, occupying the same slot in the system hierarchy as motor control MCU -> embedded controller -> semiconductor. The dsPIC33EP family integrates a DSP engine with single-cycle MAC, dual 40-bit accumulators, and hardware divide support, making it well suited to closed-loop control mathematics. Key features include the 70 MIPS dsPIC DSC core, integrated operational amplifiers, two CAN 2.0B modules, four quadrature encoder interfaces, and multiple motor-control PWM channels. These peripherals directly address precision motor control, digital power conversion, and industrial connectivity requirements without external analog or communication ICs. Technically, the device operates at 3.3V with Harvard architecture and Peripheral Pin Select (PPS), which allows remapping of most digital peripherals to any of the RPn/RPIn pins, dramatically increasing layout flexibility on dense 100-pin boards. The -H/PF suffix denotes the extended temperature variant (up to 150C ambient per Microchip ordering-code convention) in TQFP packaging, distinguishing it from the industrial -I/PF grade. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, solar inverters and digital power supplies, automotive auxiliary systems, and industrial automation nodes using the dual CAN interfaces. Design consideration: because the -H grade is targeted at high-temperature environments, junction-to-ambient thermal resistance and board copper area must be validated at the highest planned ambient temperature; also provision the VCAP stabilizing capacitor required by the 1.8V internal core regulator. This page synthesizes distributor availability data, drop-in same-footprint alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet, providing a single engineering-ready reference for the DSPIC33EP128GM710-H/PF.

RFQ İletişim

DSPIC33EP128GM710-H/PT

DSPIC33EP128GM710-H/PT - 70 MIPS 16-bit DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GM710-H/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 70 MIPS performance with 128KB of flash program memory and 16KB of RAM, housed in a 100-pin TQFP (PT) surface-mount package and qualified to AEC-Q100 for automotive applications. A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. In the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EP family sits above general-purpose MCUs (like the PIC16 family) and below multi-core application processors, occupying the niche where precise, fast control loops - motor commutation, digital power conversion, sensor fusion - must run deterministically in real time. Key differentiating features of the dsPIC33EP128GM710 include its 70 MIPS dsPIC DSC core with integrated DSP engine (single-cycle MAC, 40-bit accumulator), on-chip operational amplifiers for current sensing, dual CAN modules, and multiple communication interfaces including I2C, SPI, and UART. Per Mouser listings, the GM710 integrates 12 motor-control-related PWM/IC/OC channels with quadrature encoder interface (QEI) support and two on-chip op amps - capabilities that eliminate external analog signal-conditioning circuitry in motor drive designs. Architecturally, the device operates from a single 3.0V to 3.6V supply with a 60MHz core clock (per Microchip USA product data), achieving 60 MIPS instruction throughput at that clock rate with a maximum supply current around 60mA. Four DMA channels offload data movement from the CPU, and 13 timers support complex timing requirements. Flash is organized as 43K x 24-bit instruction words, and the DSP engine supports MAC and dual MAC instructions for filtering and transform algorithms. Typical applications include precision PMSM/BLDC and ACIM motor control for automotive pumps, fans, and actuators; digital power supplies and solar inverters; and industrial automation nodes requiring CAN networking with local DSP-class processing. Design consideration: the -H suffix is Microchip's extended-temperature automotive grade; confirm the exact operating temperature range in the manufacturer datasheet before layout, and budget a robust 3.3V rail with adequate decoupling given 60mA peak core current. This page synthesizes verified distributor data, drop-in family alternatives, and practical design guidance not found in a single manufacturer source.

RFQ İletişim

DSPIC33EP128GM710-I/PT

DSPIC33EP128GM710-I/PT - 16-bit 70 MIPS DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128GM710-I/PT is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 128KB (43K x 24) Flash program memory and 16KB RAM, housed in a 100-pin TQFP (12x12 mm) package operating from 3.3V over -40C to +85C. A digital signal controller combines the computational throughput of a digital signal processor with the deterministic control and rich peripheral set of a microcontroller. Within the power management hierarchy of embedded systems, a DSC sits above general-purpose MCUs in math-intensive real-time control loops, making the dsPIC33EP family a bridge between DSP ICs and 16-bit microcontrollers for closed-loop applications such as field-oriented motor control and digital power conversion. Key features include 70 MIPS execution at 3.3V, integrated DSP engine with 40-bit accumulators and single-cycle MAC, up to 2 on-chip op-amps, 4 UARTs, 2 CAN 2.0B modules, 2 SPI, 3 I2C, 8 input-capture / 8 output-compare channels, 4 quadrature encoders (QEI), and dual ADC modules supporting concurrent sampling for precision motor control. The dsPIC33E core features a 16-bit modified Harvard architecture with a 24-bit instruction word, DSP multiply-accumulate hardware, barrel shifter, and DMA channels that offload data movement from the CPU. Code protection, internal fast RC oscillators, and a Phase-Locked Loop (PLL) multiplier allow flexible clocking from 7.37 MHz internal FRC up to the 70 MIPS operating ceiling. Per the Microchip product page, the GM710 family with op-amps and CAN specifically targets high-performance precision motor control systems. Typical applications include brushless DC and PMSM motor drives with sensorless field-oriented control, digital power supplies (PFC, LLC, inverter stages), industrial automation nodes using CAN, and embedded signal-processing equipment. Design consideration: connect all VDD/VSS pairs and use any PGECx/PGEDx pair consistently for ICSP programming - the device supports in-circuit serial programming and debugging via MPLAB tools such as SNAP or ICD. This page synthesizes verified distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128GM710T-I/PF

DSPIC33EP128GM710T-I/PF - 16-bit 70 MIPS DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GM710T-I/PF is a 16-bit dsPIC33EP digital signal controller delivering 70 MIPS performance with 128KB (43K x 24) of Flash program memory and 16KB of RAM, housed in a 100-pin TQFP (14 x 14 mm) package with industrial temperature rating of -40C to +85C. A digital signal controller (DSC) combines the compute capability of a digital signal processor with the peripheral integration, interrupt architecture and deterministic control behavior of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for math-intensive real-time control loops and below standalone DSPs in cost and integration density. Key features include 12 Motor Control PWM (MCPWM) channels, 8 input capture and 8 output compare channels, 2 quadrature encoder interfaces, 4 on-chip operational amplifiers, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). ThePeripheral Pin Select (PPS) feature allows remapping of many peripherals onto available RPn pins, greatly increasing layout flexibility in dense 100-pin designs. Architecturally, the dsPIC33E core uses a modified Harvard bus structure with a 17-bit x 17-bit single-cycle hardware multiplier, 40-bit accumulators, dual DSP multiply-accumulate support and a barrel shifter, allowing filters and transforms to run at full core speed without external assistance. Program execution is pipelined for deterministic interrupt latency. Typical applications include precision motor control (BLDC, PMSM, stepper), digital power supplies and inverters, sensor signal conditioning leveraging the integrated op-amps, and industrial automation nodes where the CTMU enables capacitive touch or time-of-flight measurement. Design consideration: the device operates at 3V to 3.6V single supply; ensure decoupling on all VDD/VDDCORE pairs and follow Microchip's oscillator layout guidance for the 70 MIPS internal PLL clock. This page adds value over the raw datasheet by synthesizing distributor pricing, verified drop-in family alternatives, and application-level design notes in one structured reference.

RFQ İletişim

DSPIC33EP128GM710T-I/PT

DSPIC33EP128GM710T-I/PT - 70 MIPS 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GM710T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 128KB (43K x 24) of Flash program memory, 16KB of data RAM, and a 100-pin TQFP (PT, 14x14 mm) surface-mount package, rated for industrial -40C to +85C operation. A digital signal controller combines the computational core of a microcontroller with DSP-style math acceleration in a single chip. In the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice when control loops (such as field-oriented motor control or digital power conversion) require multiply-accumulate throughput alongside real-time I/O and peripherals. Key features of the DSPIC33EP128GM710T-I/PT include a high-performance 16-bit dsPIC33E core with DSP engine, barrel shifter, and 40-bit wide accumulators; multiple high-resolution PWM modules suited for motor control and switching power supplies; DMA channels for low-CPU-overhead data movement; and Peripheral Pin Select (PPS), which allows many digital peripherals to be remapped to a wide choice of pins for flexible board routing. The dsPIC33E architecture uses an enhanced Harvard bus structure with a 24-bit instruction word and pipelined execution, achieving up to 70 MIPS from an internally generated clock, reducing external oscillator cost. Fixed-point DSP instructions (MAC, MPY, ED) enable fast FIR/IIR filtering, and the enriched peripheral set includes high-speed ADCs, UART/SPI/I2C communication ports, and a watchdog with dual TTL-compatible crystal options. Typical applications include precision motor control (BLDC, PMSM, stepper) for industrial automation, digital power supplies and solar inverters, and sensor-fusion embedded control in appliances and automotive-adjacent systems, where deterministic interrupt latency and hardware PWM resolution matter more than raw clock frequency. Design consideration: keep the Flash erase/write voltage requirements and 3.0V to 3.6V supply rail in mind; provide solid VDD/VSS decoupling on all power pin pairs and a low-impedance VDDCORE capacitor per the manufacturer datasheet to guarantee stable core regulation at 70 MIPS. This page synthesizes distributor pricing, drop-in alternatives, design notes, and application guidance not found on the standard manufacturer product page.

RFQ İletişim

DSPIC33EP128GP502-E/SP

DSPIC33EP128GP502-E/SP - 16-bit DSC 60 MIPS 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GP502-E/SP is a 16-bit dsPIC33EP Digital Signal Controller (DSC) delivering up to 60 MIPS core performance, 128 KB (43K x 24) of Flash program memory, and 8 KB of SRAM, housed in a 28-pin SPDIP through-hole package. It is an automotive AEC-Q100 qualified part with an extended -40C to +125C temperature rating. A Digital Signal Controller combines the deterministic interrupt architecture and peripheral set of a microcontroller with the DSP engine (single-cycle MAC, DSP instruction set) of a digital signal processor, placing it in the hierarchy DSC -> 16-bit microcontroller -> embedded processor -> semiconductor. This makes dsPIC33E devices a common choice where control loops and math-intensive signal processing coexist, such as motor control and digital power conversion. Key features include the 16-bit dsPIC RISC core at 60 MIPS, 128 KB self-programmable Flash, 8 KB RAM, 21 general-purpose I/O pins, and integrated peripherals including high-speed PWM, DMA, Brown-out Detect/Reset (BOR), Power-on Reset (POR), and a Watchdog Timer (WDT). The E/SP suffix denotes the extended automotive temperature grade in the SPDIP package. Architecturally, the dsPIC33EP core supports C compiler development in Microchip MPLAB X with the XC16 compiler, and in-circuit serial programming (ICSP) through any PGECx/PGEDx pin pair, simplifying field updates and debugging. The DMA controller offloads data movement between peripherals and RAM, freeing CPU cycles for control algorithms. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power supplies and converters, automotive auxiliary systems requiring AEC-Q100 parts, and general-purpose embedded control with DSP filtering requirements. Design consideration: the SPDIP package suits prototyping and low-volume through-hole assembly; for space-constrained or automated SMT production, the same die is available in SSOP and QFN-suffix packages, but those are not drop-in replacements for the SPDIP footprint. This page synthesizes verified distributor data, family drop-in alternatives, pricing context, and practical design notes not found together in the manufacturer datasheet. Pricing shown is an estimate as of 2026-09-23.

RFQ İletişim

DSPIC33EP128GP502-E/SS

DSPIC33EP128GP502-E/SS - 16-bit DSC 60 MIPS 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GP502-E/SS is a 16-bit Digital Signal Controller (DSC) delivering 60 MIPS performance with 128 KB of Flash program memory and 16 KB of RAM, housed in a 28-pin SSOP (SS) package rated for the extended -40C to +125C temperature range. A Digital Signal Controller combines the peripheral set and familiar programming model of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the embedded hierarchy, the dsPIC33E family sits between general-purpose MCUs and dedicated DSPs, making it a natural choice when a control loop must also execute real-time math such as PI regulation, filtering, or transforms within a single interrupt service routine. Key features include the dsPIC33E core running at up to 60 MIPS (equivalent to 60 MHz on the two-cycle instruction pipeline), 128 KB (43K x 24 instruction words) of self-programming Flash, and the GP50-series peripheral suite: high-speed PWM modules with complementary outputs and dead-time control, on-chip op amps and advanced analog, multiple UART/SPI/I2C ports, DMA, and a 10/12-bit ADC. I/O pins sink or source 15 mA (22 mA on high-drive pins) and many are 5V-tolerant, easing interface designs in 5V-tolerant industrial environments. Architecturally, the device pairs a 16-bit modified Harvard core with a dedicated DSP engine supporting single-cycle MAC and dual data fetch, plus a Peripheral Trigger Generator (PTG) that offloads sequenced tasks from the CPU. In-Circuit Serial Programming (ICSP) and debug are supported via any PGECx/PGEDx pin pair, and CodeGuard-class flash protection options are available on the family. Typical applications include digital power supplies and PFC stages driven by the high-speed PWM, BLDC/PMSM and ACIM motor control, industrial automation nodes, and sensor-conditioning systems that exploit the on-chip op amps and CTMU. The -E extended temperature grade suits electronics mounted near motors or in sealed outdoor enclosures. Design consideration: the device operates from a 3.0V to 3.6V supply, so level translation or 5V-tolerant pin selection is required when interfacing 5V logic; always decouple all VDD/VDDCORE pins and place the ICSP connector on a dedicated PGEC/PGED pair. This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes in one place - information not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128GP502-H/MM

DSPIC33EP128GP502-H/MM - 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GP502-H/MM is a 16-bit digital signal controller (DSC) with 128 KB of Flash memory, 16 KB of SRAM, and a core running at up to 60 MHz (70 MIPS family maximum), housed in a 28-pin QFN-S surface-mount package with a -40C to +125C operating range and AEC-Q100 automotive qualification. A digital signal controller combines the computational architecture of a microcontroller (MCU) with the arithmetic capabilities of a digital signal processor (DSP). Within the power-management hierarchy of embedded systems, the DSC occupies the space between general-purpose MCUs and dedicated DSP chips, offering deterministic interrupt latency, single-cycle MAC (multiply-accumulate) instructions, and tightly integrated analog peripherals on a single die. Key features of this device include the dsPIC33E GP-series peripheral set: high-speed PWM modules for digital power conversion, integrated operational amplifiers, advanced analog functionality including a CTMU (Charge Time Measurement Unit), CAN 2.0B communication for automotive and industrial networks, and a Peripheral Trigger Generator (PTG) for hardware-autonomous task scheduling. The 128 KB self-programming Flash supports field firmware updates, while 16 KB of on-chip SRAM accommodates control-loop state variables and communication buffers. Architecturally, the dsPIC33E core implements a modified Harvard pipeline with DSP-engine instructions and two address-generation units, enabling single-cycle MAC operations at full core speed. The GP502 variant balances performance and cost within a family that scales up to 512 KB Flash and 48 KB SRAM. Typical applications include automotive body and powertrain auxiliary control, sensorless motor control (PMSM, BLDC, ACIM), digital power supplies (totem-pole PFC, LLC), and general-purpose industrial sensing with on-chip op-amp signal conditioning. Design consideration: the -H suffix denotes the extended 125C temperature grade; verify junction temperature against package thermal resistance when running near maximum core speed in automotive ambient environments. This page adds value beyond the manufacturer datasheet by synthesizing distributor listings, drop-in alternatives, and pricing-availability context in one place.

RFQ İletişim

DSPIC33EP128GP502-H/SO

DSPIC33EP128GP502-H/SO - 16-bit DSC 128KB 70MHz AEC-Q100 | Microchip

The Microchip Technology DSPIC33EP128GP502-H/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP GP502 family with 128 KB Flash, 16 KB SRAM, and operation up to 70 MIPS, packaged in a 28-pin SOIC (7.50 mm width) and qualified to AEC-Q100 for automotive use. A digital signal controller combines the computational architecture of a digital signal processor with the peripherals and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, providing single-cycle MAC and DSP instructions plus high-resolution PWM, making the dsPIC33 family a standard choice for digital power conversion and motor control. Key features of this part include 128 KB of self-programmable Flash (43K x 24-bit words) and 16 KB of SRAM, an operating speed of up to 70 MIPS from the internal PLL, and a rich analog and control peripheral set: high-speed PWM outputs, on-chip op amps, comparators, and an advanced 10/12-bit ADC. The H-grade temperature range of -40C to +150C distinguishes it from the standard I-grade (-40C to +85C), enabling placement in high-temperature automotive zones and under-hood environments. The dsPIC33E CPU core uses a 16-bit modified Harvard architecture with DSP engine extensions, supporting zero-overhead looping, modulo and bit-reversed addressing, and single-cycle multiply-accumulate. Two-wire, SPI, and UART serial interfaces, multiple remappable peripheral pins (PPS), and ICSP/ICD debug channels allow flexible low-cost board designs without external memory for most control applications. Typical applications include brushless DC and PMSM motor control, digital SMPS and PFC power supplies, automotive actuators and solenoid drivers, LED drivers, and industrial sensing nodes where DSP filtering and precision analog are combined on one chip. Design consideration: the H-grade 150C rating relaxes thermal derating but still requires junction-temperature analysis at full 70 MIPS operation; verify total power via IDD curves and keep the exposed trace routing on the 28-SOIC short for PWM edges. This page adds value beyond the Microchip datasheet by consolidating distributor pricing, verified drop-in same-family alternatives, engineering design notes, and FAQ structured for AI search engines.

RFQ İletişim

DSPIC33EP128GP502-H/SP

DSPIC33EP128GP502-H/SP - 16-bit DSC 60 MIPS 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GP502-H/SP is a 16-bit digital signal controller (DSC) delivering up to 60 MIPS from its dsPIC33E core, with 128 KB of Flash program memory, 16 KB of SRAM, and a 28-pin SPDIP through-hole package. A digital signal controller combines a microcontroller's peripheral set with DSP-engine math capability in one silicon device. In the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes real-time control loops (PID, filters, transforms) while simultaneously handling communication, timing, and analog sensing, making it a single-chip alternative to MCU-plus-DSP two-chip designs. Key features include a 16-bit modified Harvard architecture with DSP instruction support (MAC, modulo addressing), high-speed PWM outputs suited for digital power conversion, up to 85°C-capable commercial temperature in the -H grade, and a rich general-purpose peripheral set including UART, SPI, and I2C serial interfaces. The 128 KB self-programmable Flash supports field firmware updates, and 16 KB of SRAM provides headroom for control loops and buffering. Architecturally, the dsPIC33E pipeline is optimized for C-compiler efficiency with hardware loop support and single-cycle MAC operations, so control algorithms written in ANSI C achieve near-DSP throughput. The Peripheral Trigger Generator and DMA reduce CPU interrupt load in high-rate sampling systems. Typical applications include industrial automation and motor control, switch-mode power supplies and digital power, and embedded sensing or audio signal processing where the through-hole 28-pin SPDIP package simplifies prototyping and low-volume production. Design consideration: keep VDD and AVDD decoupled with 0.1 uF ceramics close to each pin and respect PGECx/PGEDx pairing for ICSP programming. This page adds value beyond the datasheet by consolidating distributor pricing, pin-compatible same-family alternatives, and practical design notes in one place.

RFQ İletişim

DSPIC33EP128GP502-H/SS

DSPIC33EP128GP502-H/SS - 16-bit DSC 60MHz 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GP502-H/SS is a 16-bit Digital Signal Controller (DSC) combining a 70 MIPS-capable dsPIC33E core (60 MHz operation for the H temperature grade), 128 KB Flash and 16 KB SRAM in a 28-pin SSOP surface-mount package. It integrates high-speed PWM, op amps and advanced analog peripherals for embedded control and digital signal processing. A Digital Signal Controller is a hybrid device that merges the control peripherals of a microcontroller (MCU) with the math acceleration of a digital signal processor (DSP). In the power-management hierarchy, DSCs sit between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC and divide instructions plus deterministic interrupt latency for real-time closed-loop control. Key features include up to 70 MIPS core performance, 128 KB of self-programming Flash with ECC, 16 KB SRAM, high-speed PWM modules suited to power conversion, and a rich analog suite with ADC and op-amp peripherals. Multiple serial interfaces (UART, SPI, I2C) and remappable peripheral pins (PPS) provide flexible I/O design on the 28-pin footprint. The dsPIC33E architecture uses a modified Harvard pipeline with 16-bit instructions and DSP engine supporting X and Y data memory, enabling FIR/IIR filters and transforms in control loops. ICSP programming and debugging is supported through any PGECx/PGEDx pin pair via MPLAB X IDE with MPLAB SNAP, ICD 3 or REAL ICE tools. Typical applications include switch-mode power supplies, digital power factor correction, motor control (BLDC/PMSM/ACIM), industrial automation, and high-fidelity audio processing where DSP math and deterministic control are required on a compact 28-pin board. Design consideration: choose the correct temperature grade suffix - the -H variant operates over a 0C to +85C range, while -I (-40C to +85C) and -E (-40C to +125C) suit harsher environments - and verify VCAP/VDDCORE capacitor placement for core regulation stability. This page synthesizes distributor availability, same-footprint drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128GP502-I/MM

DSPIC33EP128GP502-I/MM - 16-bit DSC 70 MIPS 128KB Flash | Microchip

The Microchip DSPIC33EP128GP502-I/MM is a 16-bit Digital Signal Controller (DSC) delivering 70 MIPS at a 60 MHz core frequency, integrating 128 KB of Flash program memory and 16 KB of RAM in a 28-pin QFN-S (6x6 mm) package with an exposed thermal pad. The part supports industrial-grade -40C to +125C operation and is positioned at the mid-density node of Microchip's dsPIC33EP GP50 family, balancing compute density against package footprint. A digital signal controller combines the deterministic interrupt response and rich peripheral set of a microcontroller with single-cycle multiply-accumulate (MAC) and barrel-shifter performance of a fixed-point DSP. Within the embedded hierarchy, the dsPIC33E core sits above general-purpose 8-bit MCUs and parallel to 32-bit Cortex-M4 microcontrollers, occupying a unique niche for real-time control loops where both DSP math (FFT, FIR, PID with high update rate) and deterministic GPIO/PWM/timer scheduling are required in a single device. Key features include the high-speed 70 MIPS dsPIC33E core with single-cycle MAC and hardware divide, dual high-speed PWM modules suitable for digital power conversion (each with independent time base, duty cycle, and fault inputs), up to four on-chip op amps usable for current sensing or signal conditioning, a 10/12-bit ADC with sample-and-hold, ECAN 2.0B for industrial networking, plus I2C, SPI and UART peripherals. The Peripheral Trigger Generator (PTG) automates peripheral-to-peripheral sequencing, offloading the CPU from repetitive timing chores. Architecturally, the device uses a modified Harvard 16-bit core with a 2-stage pipeline, hardware divide, and a deterministic interrupt controller. Multiple PGECx/PGEDx pairs support In-Circuit Serial Programming (ICSP) and JTAG-style debugging, and any pair may be used for debug as long as PGECx and PGEDx match. The 28-pin QFN-S package exposes up to 21 general-purpose I/O pins while reserving pads for power, ground, programming/debug, and analog references. Typical applications include brushless DC and PMSM motor control FOC loops, digital switched-mode power supplies and LED drivers running at high PWM frequencies, sensor signal conditioning nodes in industrial CAN networks, and portable/medical devices requiring low-cost DSP math. When laying out the PCB, place the 10uF VCAP decoupling capacitor on VDDCORE as close to pin 24 as possible and connect every VDD/VSS pair. Solder the exposed thermal pad to a continuous ground pour for thermal dissipation; budget flash and RAM headroom since 128 KB / 16 KB is the mid-tier density of the GP502 family. This page synthesizes distributor pricing, drop-in family alternatives, pinout, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128GP502-I/SS

DSPIC33EP128GP502-I/SS - 16-bit DSC 128KB Flash 60MHz | Microchip

The Microchip Technology DSPIC33EP128GP502-I/SS is a 16-bit Digital Signal Controller (DSC) delivering up to 60 MIPS core performance, 128 KB of Flash program memory, and 16 KB of RAM, housed in a 28-pin SSOP (SS) surface-mount package rated from -40C to +85C. A Digital Signal Controller combines the peripheral set and interrupt architecture of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy, the dsPIC33E family sits above basic PIC16/PIC18 MCUs and below full DSPs such as the dsPIC33CH dual-core series, making it the industry workhorse for digitally controlled power conversion and motor control where a single-chip solution is required. Key features of this GP (General Purpose) variant include the high-speed 16-bit dsPIC33E core with DSP instruction extensions, a CAN 2.0B module for industrial networking, on-chip operational amplifiers, analog comparators, a 12-bit ADC with up to 10 inputs on this 28-pin device, and the Peripheral Trigger Generator (PTG) for autonomous ADC triggering. The Peripheral Pin Select (PPS) system allows most digital peripherals to be mapped to any RPn pin, greatly easing PCB layout. Architecturally, the device couples a 24-bit instruction word pipeline with two 40-bit accumulators, a 17x17 hardware multiplier, and single-cycle MAC operations. Flash is 43K x 24 organized, and the core can run at up to 60 MIPS from an internal PLL using the Fast RC or external crystal source. Communication peripherals include UART, SPI, and I2C in addition to ECAN. Typical applications include switch-mode power supplies and digital power, brushless DC and PMSM motor control, automotive and industrial sensor nodes, and general-purpose embedded control needing DSP filtering. Design-wise, budget the internal 1.8V core regulator with a low-ESR capacitor on the VCAP pin and obey the 3.0V to 3.6V supply range for the -I temperature grade. This page adds value beyond the datasheet by consolidating distributor pricing, pin-compatible family drop-ins, and practical design notes in one AI-citable reference.

RFQ İletişim

Alt Kategoriler

Ürünler (39.000+)

DSPIC33EP128GM604-H/ML - 70 MIPS DSC 128KB Flash QFN-44 | Microchip

DSPIC33EP128GM604-I/ML - 70 MIPS DSC, 128KB Flash, 44-QFN | Microchip

DSPIC33EP128GM604-I/PT - 16-Bit 70 MIPS DSC | Microchip

DSPIC33EP128GM604T-I/ML - 70 MIPS 16-bit DSC, 128KB Flash | Microchip

DSPIC33EP128GM706-E/PT - 16-bit 60 MIPS DSC 128KB | Microchip

DSPIC33EP128GM706-H/PT - 16-Bit 70 MIPS DSC, 128KB Flash | Microchip

DSPIC33EP128GM706-I/MR - 70 MIPS 16-bit DSC, 128KB Flash | Microchip

DSPIC33EP128GM706T-I/MR - 70 MIPS 128KB DSC | Microchip Technology

DSPIC33EP128GM710-E/BG - 60 MIPS 16-bit DSC, 128KB Flash | Microchip

DSPIC33EP128GM710-E/PF - 16-bit 60 MIPS DSC, 128KB Flash | Microchip

DSPIC33EP128GM710-H/BG - 70MIPS 128KB DSC TFBGA-121 | Microchip

DSPIC33EP128GM710-H/PF - 70 MIPS 16-bit DSC 128KB Flash | Microchip

DSPIC33EP128GM710-H/PT - 70 MIPS 16-bit DSC, 128KB Flash | Microchip

DSPIC33EP128GM710-I/PT - 16-bit 70 MIPS DSC 128KB | Microchip

DSPIC33EP128GM710T-I/PF - 16-bit 70 MIPS DSC, 128KB Flash | Microchip

DSPIC33EP128GM710T-I/PT - 70 MIPS 16-bit DSC 128KB Flash | Microchip

DSPIC33EP128GP502-E/SP - 16-bit DSC 60 MIPS 128KB Flash | Microchip

DSPIC33EP128GP502-E/SS - 16-bit DSC 60 MIPS 128KB Flash | Microchip

DSPIC33EP128GP502-H/MM - 16-bit DSC 128KB Flash | Microchip

DSPIC33EP128GP502-H/SO - 16-bit DSC 128KB 70MHz AEC-Q100 | Microchip

DSPIC33EP128GP502-H/SP - 16-bit DSC 60 MIPS 128KB Flash | Microchip

DSPIC33EP128GP502-H/SS - 16-bit DSC 60MHz 128KB Flash | Microchip

DSPIC33EP128GP502-I/MM - 16-bit DSC 70 MIPS 128KB Flash | Microchip

DSPIC33EP128GP502-I/SS - 16-bit DSC 128KB Flash 60MHz | Microchip