Entegre Devreler

DSPIC33EP128MC202-H/SO

DSPIC33EP128MC202-H/SO - 16-bit DSC 70 MIPS 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202-H/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with a 70 MIPS dsPIC DSC core, 128KB of Flash program memory and 16KB of RAM, housed in a 28-pin SOIC package (7.50mm body width). A digital signal controller combines the computational strengths of a microcontroller (MCU) with the math acceleration of a digital signal processor (DSP) in a single chip. In the semiconductor hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs: it retains MCU-style peripherals, interrupts and flash memory while adding single-cycle MAC instructions, hardware divide and high-resolution PWM modules. This makes DSCs the default choice for closed-loop control systems where both fast arithmetic and rich peripheral integration are needed. Key features of the DSPIC33EP128MC202-H/SO include the 16-bit modified Harvard dsPIC33E core running up to 70 MIPS, AEC-Q100 qualification for automotive environments, a high-speed 12-bit ADC (1.1 Msps in 10-bit mode with four sample-and-hold circuits, or 500 ksps in 12-bit mode), and up to three comparators with direct ADC connection. The device integrates 5 timers, 4 DMA channels and 3 external interrupts, with six analog inputs available on 28-pin members of the family. Architecturally, the dsPIC33E core uses a pipelined 16-bit datapath with DSP instruction extensions, and the high-speed PWM module with flexible trigger sources is the defining peripheral of the MC (Motor Control) sub-family, distinguishing it from the GP502 general-purpose variant. Independent ADC trigger sources allow tightly synchronized current and voltage sampling inside a PWM period, which is essential for field-oriented motor control and digital power converters. Typical applications include precision motor control (BLDC, PMSM, stepper), switch-mode power supplies and digital lighting, automotive auxiliary systems benefiting from AEC-Q100 qualification, and general embedded control where DSP math is required. The 28-pin SOIC footprint suits cost- and space-conscious control boards. Design consideration: the H temperature suffix denotes harsh-environment operation, and the 3.3V supply requires level translation if interfacing to 5V peripherals; place ADC sampling around PWM edges using the independent trigger sources for best noise performance. This page synthesizes distributor pricing, drop-in alternatives within the same 28-SOIC footprint, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC202-I/MM

DSPIC33EP128MC202-I/MM - 70 MIPS DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202-I/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS (60 MHz instruction clock) with 128 KB of Flash program memory and 16 KB of RAM, housed in a 28-pin QFN-S (6x6 mm) exposed-pad package. A digital signal controller combines the computational capability of a digital signal processor with the control peripherals and ease of use of a microcontroller, sitting in the hierarchy DSC -> 16-bit microcontroller -> embedded processor -> system-on-chip. The dsPIC33EP family integrates a DSP engine with single-cycle MAC and 40-bit accumulators alongside standard MCU peripherals, making it a go-to choice for embedded control loops that also require signal processing. Key features include high-speed PWM modules with complementary outputs and dead-time control, an MCPWM unit, quadrature encoder interface (QEI), two on-chip operational amplifiers, three comparators, and a 10-bit ADC - all purpose-built for precision motor control. The device operates from a 3V to 3.6V supply across an industrial temperature range of -40C to +85C (the -I suffix), supports in-circuit serial programming (ICSP) via any PGECx/PGEDx pin pair, and includes IEEE 1149.2-compatible JTAG boundary scan for production test. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, switched-mode power supplies, digital lighting ballasts, and embedded control systems requiring DSP-class math. Design tip: connect all VDD, VSS, AVDD and AVSS pins and use any single PGECx/PGEDx pair consistently for programming - mixing pairs causes ICSP failures. This page adds distributor pricing tiers, verified drop-in alternatives within the same package, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC202-I/SO

DSPIC33EP128MC202-I/SO - 16-bit DSC 60MHz 128KB Flash | Microchip

The Microchip DSPIC33EP128MC202-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, combining a 60 MHz dsPIC DSC core (up to 70 MIPS), 128KB of Flash program memory, and 16KB of RAM in a 28-pin SOIC (SO) package with industrial temperature rating (-40C to +85C). A digital signal controller merges the compute power of a DSP with the peripheral integration and interrupt responsiveness of a microcontroller. Within the power management hierarchy of embedded systems, a DSC sits above generic MCUs for math-intensive real-time control loops, making the dsPIC33E family a staple of digital power and precision motor control engineering. Key features include a 16-bit modified Harvard architecture with DSP engine (single-cycle MAC, 40-bit accumulator), high-speed PWM modules purpose-built for motor and power conversion, 4 DMA channels, 5 timers, and 3 external interrupt sources. The integrated enhanced peripherals allow brushless DC, permanent magnet, and other motor types to be controlled without external signal-chain components. Technically, the device executes C and assembly with hardware divide, dual operand fetch, and zero-overhead looping. Its low-power modes (Idle, Sleep, Doze) reduce consumption in battery-aware designs, and the CMOS process supports industrial noise margins. Typical applications include brushless DC motor drives, digital power supplies (PFC, LLC), solar inverters, and sensorless FOC controllers where deterministic 70 MIPS-class throughput and high-resolution PWM are decisive. Design consideration: this part operates at 3.0V-3.6V-class supply rails typical of the family - verify the exact electrical characteristics in the manufacturer datasheet before layout, and budget the 28-pin SOIC thermals for continuous PWM output drive. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP 28-pin family, and practical design notes not found in a single manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC202-I/SP

DSPIC33EP128MC202-I/SP - 70 MIPS 16-bit DSC | Microchip

The Microchip Technology DSPIC33EP128MC202-I/SP is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 128 KB (43K x 24) of Flash program memory, 16 KB of RAM, and an industrial temperature range (-40C to +85C) in a 28-pin SPDIP through-hole package. A digital signal controller combines the compute throughput of a microcontroller with DSP-grade math acceleration in a single chip. Within the power-management hierarchy, the DSC sits above a standard MCU: it adds a hardware DSP engine (single-cycle MAC, dual operand fetch, modulo and bit-reversed addressing) on top of a 16-bit MCU architecture, making it a member of the broader 16-bit microcontroller and digital signal controller category. Key differentiating features include high-speed PWM peripherals purpose-built for motor control (complementary or independent outputs, dead-time insertion, fault inputs), an operating speed of up to 70 MIPS from an internal PLL, and integrated advanced analog peripherals that reduce external component count. The -I suffix denotes the industrial -40C to +85C operating range, and the /SP suffix denotes the 28-pin 300-mil wide-body SPDIP package suited to through-hole assembly. Architecturally, the dsPIC33E CPU executes most instructions in a single cycle at 70 MIPS, with two 40-bit accumulators, 16 x 16 multiply operations, and hardware divide support. Flash program memory is organized in 24-bit instruction words, and in-circuit serial programming (ICSP) plus JTAG boundary scan support production programming and debugging via tools such as PICkit, ICD, and REAL ICE. Typical applications include Brushed DC, Brushless DC (BLDC), permanent-magnet synchronous (PMSM), and stepper motor control, digital power supplies (power factor correction, DC-DC converters), and embedded control systems requiring DSP filtering, such as sensor signal processing. The through-hole DIP package makes the part especially popular in prototyping, education, and repairable industrial equipment. Design consideration: the dsPIC33E core requires an external low-ESR capacitor on the internal regulator output (VCAP/VDDCORE pin); this capacitor is mandatory for stable operation and must not be omitted. All VDD/VSS pairs must be connected even on simplified designs, and PGECx/PGEDx pins must be used as matched pairs during programming. This page synthesizes verified distributor data, drop-in family alternatives, pricing tiers, and practical design notes beyond what a single datasheet page provides.

RFQ İletişim

DSPIC33EP128MC202-I/SS

DSPIC33EP128MC202-I/SS - 16-bit 70 MIPS DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128MC202-I/SS is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 128 KB (43K x 24) of Flash program memory, 16 KB of RAM, and a 60 MHz operating clock in a 28-pin SSOP surface-mount package. A digital signal controller combines the fast interrupt response and deterministic behavior of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy of embedded systems, the dsPIC33E family sits between general-purpose PIC24 microcontrollers and dedicated DSPs, providing a single-chip solution for control loops that need both math throughput and rich analog integration. Microchip positions this family specifically for precision motor control, where a 70 MIPS dsPIC DSC core with integrated DSP and enhanced on-chip peripherals enables high-performance closed-loop control. Key features of the DSPIC33EP128MC202 include the 16-bit modified Harvard architecture with DSP instruction support, 128 KB of self-programmable Flash for field firmware updates, and industrial temperature operation from -40C to +85C (the /I temperature code). The 28-SSOP package suits cost- and space-sensitive control boards that still need a dedicated controller. The dsPIC33EP core couples the CPU with high-speed peripherals targeted at power conversion and motion: advanced PWM capability for inverter and converter stages, plus on-chip analog for sensing feedback. Peripherals are supported by Microchip MPLAB X IDE, the XC16 compiler, and hardware debugging tools, so designs can be developed and reused across the dsPIC33EP family. The device is programmed in-circuit through PGECx/PGEDx pin pairs - any pair can be used, but ICSPCLK and ICSPDAT must be taken from the same pair, and all VDD/VSS pins must be connected for programming to succeed. Typical applications include brushless DC and PMSM motor drives for industrial automation, digital power supplies and inverters, metering systems, IoT embedded nodes, and general industrial control boards that benefit from DSP-style math on a microcontroller. Design consideration: pin multiplexing on a 28-pin device is intensive - peripherals share pins through the Peripheral Pin Select (PPS) scheme, so map the PWM, UART, and ADC channels early in schematic capture and reserve one PGECx/PGEDx pair plus MCLR for ICSP access. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-23.

RFQ İletişim

DSPIC33EP128MC202T-E/MM

DSPIC33EP128MC202T-E/MM - 16-bit 60 MIPS DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202T-E/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance from 128 KB (43K x 24) of Flash program memory and 16 KB of RAM in a 28-pin QFN-S (6x6 mm) package. A digital signal controller combines the computational capability of a microcontroller with the math throughput of a DSP engine. Within the power-management hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs, making it a single-chip solution for embedded control systems that need both real-time control loops and signal-processing tasks. Key features include an enhanced 16-bit dsPIC DSC core with integrated DSP instruction support, dedicated motor-control peripherals such as MCPWM and QEI (quadrature encoder interface), two on-chip op-amps and three comparators, and a peripheral trigger generator (PTG). Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus, enabling flexible communication with drives, sensors, and host systems. Technically, the device integrates a high-performance PWM module purpose-built for brushless DC, permanent-magnet synchronous, AC induction, and stepper motor control. The DSP engine with single-cycle MAC, dual working register arrays, and hardware division support FOC (field-oriented control) algorithms while the analog front-end (op-amps, comparators, ADC) closes current loops without external amplifiers. Typical applications include precision motor drives, digital power supplies, industrial automation nodes, automotive auxiliary systems, and sensor fusion in embedded control. The wide peripheral set allows a single DSC to replace MCU-plus-external-PWM-controller designs. When designing with this part, budget the VCAP/VDDCORE pin with the recommended low-ESR capacitor, and verify the -40C to +125C extended (E) temperature grade against your application environment. This page synthesizes distributor availability, same-footprint drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC202T-E/SO

DSPIC33EP128MC202T-E/SO - 16-bit 60 MIPs DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202T-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP 33EP motor-control family, delivering 60 MIPs of performance with 128KB (43K x 24) of FLASH program memory, 16KB of RAM, and an extended -40C to +125C operating range in a 28-pin SOIC (7.50 mm width) package. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the mathematical throughput of a DSP core. Within the power-management hierarchy, DSCs occupy the space between general-purpose MCUs and dedicated DSPs, making them the preferred choice for closed-loop control loops such as field-oriented motor control, digital power conversion, and embedded sensing where fast multiply-accumulate operations and deterministic interrupt latency are required. Key features include the AEC-Q100 qualification that makes this E-grade part suitable for automotive environments, a 3.3 V supply rail, and integrated DSP engine instructions that accelerate control algorithms. The wide temperature rating (E suffix, -40C to +125C) distinguishes it from the standard I-grade (-40C to +85C) variant in the same package. Architecturally, the dsPIC33EP core pairs a pipelined 16-bit CPU with hardware DSP MAC instructions, and the MC (motor control) variant adds peripheral sets oriented toward PWM generation and analog feedback acquisition, enabling single-chip control of brushless DC (BLDC), permanent-magnet synchronous (PMSM), and AC induction motors. Typical applications include precision BLDC and PMSM motor drives, automotive auxiliary motor and actuator control, solar micro-inverters and digital power supplies, and industrial automation nodes requiring both signal processing and real-time control. Design consideration: at 60 MIPs the core requires a 3.3 V rail within tolerance; verify decoupling on all VDD/VSS pin pairs and confirm the exact RAM size against the current revision of the manufacturer datasheet before finalizing linker scripts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC202T-I/MM

DSPIC33EP128MC202T-I/MM - 16-bit DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202T-I/MM is a 16-bit digital signal controller (DSC) with a dsPIC33EP core running at up to 70 MIPS, 128KB (43K x 24) of Flash program memory, 16KB of RAM, and a 28-pin QFN-S (6x6 mm) package with exposed pad, supplied in Tape & Reel packing. A digital signal controller combines the compute power of a DSP with the peripheral set and ease of use of a microcontroller. In the power-management hierarchy, the dsPIC33EP family sits above general-purpose MCUs and below standalone DSPs, integrating motor-control peripherals, analog blocks, and communications in a single chip. This makes DSCs the standard choice for digital power conversion, precision motor control, and embedded sensing. Key features include a 16-bit modified Harvard architecture core, dual on-chip op amps (MCPWM per distributor data: motor control PWM), output-compare modules, comparators, and peripherals such as DMA, I2C, SPI, UART/IrDA/LIN, and QEI quadrature encoder interfaces per Microchip product information. JTAG/IEEE 1149.2 boundary scan and in-circuit programming (ICSP) support development and production programming. Industrial temperature rating covers -40C to +85C. Technically, the dsPIC33EP core features DSP multiply-accumulate instructions, fixed-point arithmetic support, and flexible interrupt vectoring, enabling fast control-loop execution for field-oriented motor control at kHz rates. Flash self-programming supports field firmware updates, and the watch-dog timer plus low-voltage detect protect against brownout conditions. Typical applications include brushless DC and PMSM motor control, digital power supplies (LLC, PFC), solar micro-inverters, and industrial sensors that combine analog signal conditioning with communications. A key design consideration: the 28-pin QFN exposed pad must be soldered to a ground plane for thermal dissipation and EMC; budget I/O carefully since motor-control designs typically need PWM pairs, encoder inputs, and at least one UART simultaneously. This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, drop-in same-package alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim

DSPIC33EP128MC202T-I/SO

DSPIC33EP128MC202T-I/SO - 16-bit 70 MIPS DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202T-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering up to 70 MIPS performance, 128KB (43K x 24) of FLASH program memory, and 16KB of RAM, housed in a 28-pin SOIC package with industrial temperature rating (-40C to +85C). A digital signal controller combines the computational architecture of a microcontroller with the math acceleration of a digital signal processor. In the power-management hierarchy, the dsPIC33EP sits above general-purpose MCUs like the PIC16 series, offering single-cycle MAC instructions, hardware divide, and DSP engine features that make it a power management IC controller for motor drive and digital power conversion systems. Key differentiating features include the 70 MIPS dsPIC33E core with integrated DSP engine, motor-control-specific peripherals, in-circuit and in-application programming capability, two program and two complex data breakpoints, and IEEE 1149.2-compatible (JTAG) boundary scan with trace and run-time watch. The tape-and-reel (T) suffix supports automated assembly for volume production. Architecturally, the dsPIC33E core integrates a 16-bit modified Harvard pipeline with an on-chip DSP engine that performs single-cycle MAC operations, enabling high-bandwidth control loops required by field-oriented motor control. The MC (Motor Control) sub-family adds complementary PWM outputs, quadrature encoder interfaces, and high-speed ADC peripherals tailored for BLDC, permanent-magnet synchronous, and stepper motor drive topologies. Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), industrial automation, and servo drives. The MC peripheral set and 70 MIPS headroom allow designers to build energy-efficient, quieter, longer-range motor systems as highlighted by Microchip. Design consideration: the industrial (I) suffix is rated to +85C; for automotive ambient ranges choose the E-temperature (up to +125C) variant such as DSPIC33EP128MC202T-E/SO, verifying AEC-Q100 qualification requirements for your program. This page synthesizes distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC204-E/ML

DSPIC33EP128MC204-E/ML - 60 MIPS 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC204-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 60 MIPS performance with 128 KB (43K x 24) of Flash program memory and 16 KB of RAM, housed in a 44-pin QFN (8x8 mm) surface-mount package with extended temperature operation. A digital signal controller combines the computational architecture of a microcontroller with the DSP capability of a digital signal processor. In the embedded hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs: it executes one instruction per cycle with a modified Harvard architecture, while integrating hardware DSP multiply-accumulate (MAC) instructions, division support, and modulo/barrel-shifter addressing. This makes the dsPIC33 family a natural fit for control-loop-intensive power management and motion systems. Key features of this device include the dsPIC33E core running at up to 60 MIPS (per DigiKey listing; the wider dsPIC33E family is specified to 70 MIPS), on-chip Flash and SRAM, high-speed PWM peripherals, integrated op amps and advanced analog, and connectivity interfaces including I2C, SPI, UART/USART, IrDA, LINbus, and QEI (quadrature encoder interface). The QEI block and PWM complement make it purpose-built for brushless DC and PMSM motor control. Architecturally, the dsPIC33EP uses a 16-bit datapath with 24-bit instruction words, dual working registers, and hardware support for DSP math, enabling deterministic single-cycle multiply-accumulate execution. The device is programmed and debugged via ICSP using any paired PGECx/PGEDx pin pair, and is supported by Microchip MPLAB X IDE and MPLAB XC16 compiler toolchain. Typical applications include precision motor control (BLDC, PMSM, stepper), digital power conversion (switching supplies, PFC, inverters), and industrial automation nodes requiring deterministic control loops with encoder feedback. The QEI inputs and high-resolution PWM align directly with these workloads. Design consideration: use any PGECx/PGEDx pair for ICSP, but keep clock and data on the same numbered pair, and connect all VDD and VSS pins as required by the datasheet. This page synthesizes distributor listings, family datasheet data, drop-in alternatives, and practical design notes in one place - information typically spread across multiple sources.

RFQ İletişim

DSPIC33EP128MC204-E/MV

DSPIC33EP128MC204-E/MV - 16-Bit 60 MIPS DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC204-E/MV is a 16-bit digital signal controller (DSC) with a 60 MIPS dsPIC33EP core, 128KB (43K x 24) of FLASH program memory and 16KB of RAM, housed in a 48-pin UQFN (6x6 mm) package with extended temperature range of -40C to +125C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for math-intensive closed-loop control, and the dsPIC33E family is Microchip's 16-bit DSC line targeted at precision motor control and digital power conversion. Key features include motor-control PWM (MCPWM) peripherals with complementary outputs and dead-time control, integrated operational amplifiers and analog comparators for current-sense signal chains, four DMA channels that offload data movement from the CPU, and five timers. Serial connectivity covers I2C, SPI, UART/USART, IrDA, LIN bus and QEI (quadrature encoder interface) for position feedback. Architecturally, the dsPIC33EP core executes most instructions in a single cycle at up to 60 MIPS (the family core is rated at up to 70 MIPS per Microchip), with DSP multiply-accumulate instructions, modulo and bit-reversed addressing, and two 40-bit accumulators for efficient FIR filters and PI control loops. Flash memory is self-programmable, enabling field firmware updates. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, sensorless FOC motor control, digital power supplies (LLC, totem-pole PFC), and industrial automation nodes requiring encoder feedback. Design consideration: the 48-UQFN (6x6) exposed-pad package demands a solid ground via array under the pad for thermal and signal-integrity performance; follow the ICSP pairing rule that PGECx/PGEDx must be used as matched pairs for programming. This page synthesizes distributor pricing, same-package drop-in alternatives, pinout guidance and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC204-E/PT

DSPIC33EP128MC204-E/PT - 16-bit 60 MIPS DSC 128KB | Microchip

The Microchip DSPIC33EP128MC204-E/PT is a 16-bit digital signal controller (DSC) with a 60 MIPS dsPIC33E core, 128 KB of flash program memory (43K x 24 instruction words), and 16 KB of RAM, housed in a 44-pin TQFP (10x10 mm) package with extended temperature range (-40C to +125C, the E grade suffix). A digital signal controller combines a microcontroller (MCU) with digital signal processor (DSP) features in a single chip. Within the power-management hierarchy of embedded control, a DSC sits above general-purpose microcontrollers: it adds a hardware DSP engine, fast interrupt handling, and motor-control-specific peripherals, while retaining the flash memory, RAM, and general-purpose I/O structure of an MCU. The dsPIC33EP family is Microchip's 16-bit DSC generation optimized for precision motor control. Key features include the MCPWM (motor control PWM) peripheral with complementary outputs and dead-time control, integrated analog comparators, and on-chip operational amplifiers, which reduce external component count in sensorless and FOC (field-oriented control) motor drives. The 16-bit architecture executes up to 60 million instructions per second, and multiple PGEC/PGED pin pairs support In-Circuit Serial Programming (ICSP) and in-circuit debugging. Technical depth: the dsPIC33E core integrates a DSP engine with 40-bit accumulators, single-cycle MAC operations, and hardware divide support, allowing control-loop mathematics (PI/PID, Clarke/Park transforms) to execute within tight PWM interrupt deadlines. Flash-based program memory supports self-programming for field updates. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, power factor correction stages, digital UPS and inverter control, and embedded industrial automation nodes that combine control math with real-time PWM generation. Design consideration: connect all VDD/VSS pairs and fit the internal regulator capacitor (VCAP) on the dedicated pin as required by the datasheet; use a matched PGECx/PGEDx pair when wiring the ICSP connector. This page synthesizes distributor listings, drop-in family alternatives, and selection guidance not consolidated in the manufacturer datasheet. Pricing shown is an estimate as of 2026-09-23 and must be confirmed with distributors.

RFQ İletişim

DSPIC33EP128MC204-H/PT

DSPIC33EP128MC204-H/PT - 16-bit 60 MIPS DSC, 128KB Flash | Microchip

The Microchip DSPIC33EP128MC204-H/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS at 3.3V, with 128KB (43K x 24) of Flash program memory and 16KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. It is AEC-Q100 qualified and rated for the -40C to +125C automotive H temperature grade. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. In the system hierarchy, the dsPIC33EP family sits between general-purpose 16-bit MCUs and dedicated DSPs, making it a single-chip solution for control loops that require fast math, such as field-oriented motor control and digital power conversion. Key features include a 16-bit modified Harvard DSP core with integrated multiply-accumulate (MAC) hardware, high-speed MCPWM peripherals for motor and power conversion, on-chip analog integrations drawn from the family datasheet including op amps and advanced analog blocks, and 4 DMA channels with 5 timers per distributor parametric data. The EP generation operates from a single 3.3V supply with an internal PLL clocking system. Architecturally, the dsPIC33EP core executes most instructions in a single cycle and supports DSP class instructions for FIR/IIR filtering, PID, and coordinate rotation, which shortens control-loop latency in precision motor drive applications. Peripheral Trigger Generator (PTG) support enables autonomous peripheral sequencing to offload the CPU. Typical applications include brushless DC and PMSM motor control, digital power supplies and LED drivers, and automotive auxiliary systems where AEC-Q100 qualification is mandatory. The 44-pin TQFP footprint provides enough I/O for gate drives, current-sense feedback, and communication interfaces. Design consideration: budget decoupling on all VDD pins and place the VCAP stabilizing capacitor per the family data sheet DS70000657J layout guidance, since core-internal regulation is sensitive to board layout. This page synthesizes distributor pricing context, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone. Pricing shown is an estimate as of 2026-09-23.

RFQ İletişim

DSPIC33EP128MC204-H/TL

DSPIC33EP128MC204-H/TL - 16-bit DSC 128KB 70MIPS | Microchip

The Microchip DSPIC33EP128MC204-H/TL is a 16-bit dsPIC33EP digital signal controller (DSC) with 128 KB (43K x 24) of FLASH program memory, 16 KB of RAM, and a dsPIC DSC core running at up to 70 MIPS, housed in a 44-pin VTLA (6x6 mm) surface-mount package with exposed pad. A digital signal controller combines the compute architecture of a 16-bit microcontroller with the mathematical acceleration of a DSP engine, occupying the middle of the embedded-control hierarchy between general-purpose MCUs and full DSPs. The dsPIC33EP family from Microchip Technology integrates an enhanced Harvard-architecture core with DSP multiply-accumulate instructions, making it a natural fit for precision motor control, digital power conversion, and sensor signal processing. Key features of this family include a high-speed PWM module with advanced motor-control modes, integrated operational amplifiers and advanced analog peripherals, and AEC-Q100 qualification for automotive environments. The 70 MIPS core throughput enables closed-loop field-oriented control (FOC) at high switching frequencies, while the 128 KB FLASH provides ample code space for complex control algorithms and communication stacks. Architecturally, the dsPIC33EP core pairs 16-bit wide instructions with a 24-bit instruction word containing DSP-class operations, single-cycle MAC, and dual operand fetch. The integrated DSP engine, combined with on-chip high-speed analog such as op amps and high-resolution PWM, allows designers to implement complete sensorless motor drive or digital power topologies without external signal-conditioning stages. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, switch-mode power supplies and digital lighting ballasts, and automotive body and powertrain auxiliary functions where AEC-Q100 qualification is required. When designing with this device, connect all VDD and VSS pairs and route the exposed thermal pad to a ground plane for both heat dissipation and signal integrity; ICSP programming requires a matched PGECx/PGEDx pair. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC204-I/ML

DSPIC33EP128MC204-I/ML - 16-bit DSC 70 MIPS 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC204-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS core performance with 128 KB (43K x 24) of FLASH program memory and 16 KB of RAM, housed in a 44-pin QFN (8x8 mm) package. The industrial temperature grade (-I) supports -40C to +85C operation. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the embedded hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33E family a common choice for closed-loop control systems that need both fast math and rich on-chip analog and timing peripherals. Key features include high-speed PWM modules tailored for motor control, integrated op amps and advanced analog peripherals, multiple UART/SPI/I2C communication ports, and a DSP engine with single-cycle MAC and dual operand fetch. The 70 MIPS core executes C-compiled control loops with deterministic latency, critical for field-oriented control of motors. Architecturally, the dsPIC33EP core is a 16-bit modified Harvard machine with pipelined instruction execution and hardware DSP multiply-accumulate, supported by the Compiler for dsPIC DSCs and MPLAB X IDE toolchain. Programming and debugging use ICSP via any matched PGECx/PGEDx pin pair. Typical applications include precision brushless DC and PMSM motor drives, digital power supplies, sensor fusion nodes, and industrial automation controllers. Design consideration: connect all VDD/VSS pairs and choose one PGEC/PGED pair consistently for ICSP; mismatched PGEC/PGED pairs will prevent programming. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC204-I/PT

DSPIC33EP128MC204-I/PT - 70 MIPS 16-bit DSC | Microchip

The Microchip Technology DSPIC33EP128MC204-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance with 128 KB of Flash memory and 16 KB of RAM, housed in a 44-pin TQFP (10x10 mm) package rated from -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration and control-oriented design of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33E family sits above general-purpose MCUs for math-intensive control loops, offering single-cycle MAC and DSP instructions, fast interrupt handling, and deterministic execution that classical microcontrollers cannot match in motor-control or digital-power applications. Key features of the DSPIC33EP128MC204 include the 70 MIPS dsPIC33E core with integrated DSP engine, dedicated motor control PWM (MCPWM) peripherals, on-chip operational amplifiers and analog comparators, and a Peripheral Trigger Generator (PTG) for autonomous peripheral coordination. Communication coverage spans I2C, SPI, UART/USART, IrDA, LINbus, and Quadrature Encoder Interface (QEI), enabling direct connection to encoders, drivers, and host systems. Technically, the dsPIC33EP family uses a modified Harvard architecture with a 24-bit instruction word and DSP multiply-accumulate hardware, allowing filter and transform algorithms to run at full core speed. The MCPWM module generates complementary outputs with dead-time insertion for three-phase inverter drive, while the integrated op-amps reduce external component count in current-sense chains. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control, solar inverters and digital power supplies, and industrial automation nodes requiring deterministic closed-loop control at high PWM frequencies. Design consideration: place all VDD/VSS pairs with local 0.1 uF decoupling, and note that PGECx/PGEDx pins must be used in matched pairs for ICSP programming and debugging. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet. Pricing shown is as of 2026-09-23.

RFQ İletişim

DSPIC33EP128MC204-I/TL

DSPIC33EP128MC204-I/TL - 16-bit 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EP128MC204-I/TL is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 128KB (43K x 24) of Flash program memory, and 8KB of RAM, housed in a 44-pin VTLA (6x6 mm, exposed pad) surface-mount package. A digital signal controller combines the computational capability of a DSP with the integrated peripherals and control architecture of a microcontroller, sitting within the broader hierarchy of embedded processors: DSC -> 16-bit microcontroller -> microcontroller family -> system-on-chip for embedded control. The dsPIC33E family targets real-time, math-intensive control loops such as field-oriented motor control and digitally controlled power supplies. Key features of the DSPIC33EP128MC204 include the 70 MIPS dsPIC DSC core with integrated DSP instructions, 128KB Flash and 8KB RAM, and enhanced on-chip peripherals including high-speed PWM modules designed for precision motor control. Communication is handled by I2C, SPI, IrDA, UART, and USART interfaces, allowing direct integration with sensors, transceivers, and host processors. Architecturally, the device executes a 16-bit modified Harvard instruction set with DSP multiply-accumulate support, enabling single-cycle MAC operations in control and filtering code. The integrated analog block, including on-chip op amps and advanced analog peripherals noted by Microchip, reduces external component count in current-sense and signal-conditioning stages. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, digitally controlled power supplies (switching converters, PFC stages), and industrial automation nodes requiring deterministic control loops with rich communication connectivity. A key design consideration: the VTLA (VQFN-style, 6x6 mm) package requires the exposed thermal pad to be soldered to a grounded PCB copper pour for reliable electrical grounding and heat dissipation; skip this and thermal and ground-integrity problems follow. This page synthesizes distributor data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC204T-E/ML

DSPIC33EP128MC204T-E/ML - 16-bit 60 MIPS DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC204T-E/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS performance with 128KB (43K x 24) of FLASH program memory and 16KB of RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package with an extended -40C to +125C operating temperature range. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EP family member sits above basic MCUs and below full DSP-plus-MCU two-chip solutions, offering a single-chip path for math-intensive closed-loop control such as field-oriented motor control and digital power conversion. Key differentiating features include the high-speed PWM module with multiple MCPWM channels for complementary and independent outputs, integrated Quadrature Encoder Interface (QEI) inputs for direct encoder hookup, three on-chip operational amplifiers and four comparators that reduce external analog component count, and a Peripheral Trigger Generator (PTG) for hardware-sequenced autonomous operation. Connectivity covers I2C, SPI, multiple UART/USART channels with IrDA and LINbus support. Architecturally, the device uses a 16-bit modified Harvard dsPIC33E core executing up to 60 MIPS at 3.3V supply, with DSP multiply-accumulate instructions, single-cycle MAC, and hardware division support. FLASH is rated for in-circuit self-programming, and CMOS process technology keeps active power low while supporting sleep and idle modes for battery-conscious designs. The device is AEC-Q100 qualified for automotive environments per distributor data. Typical applications include brushless DC and PMSM motor drives, digital power supplies and solar inverters, automotive auxiliary systems requiring the extended temperature E-grade, and industrial sensing and control nodes where QEI plus high-speed PWM closes the control loop on-chip. When designing with this part, budget the 8x8 mm QFN exposed pad for thermal relief and ground return, and place 100 nF decoupling capacitors on each VDD pin pair per Microchip layout guidelines; note that the T-E suffix denotes tape-and-reel packing of the extended-temperature grade. This page synthesizes distributor data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing and availability verified as of 2026-09-23.

RFQ İletişim

DSPIC33EP128MC204T-E/PT

DSPIC33EP128MC204T-E/PT - 16-bit 60MIPS DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC204T-E/PT is a 16-bit dsPIC33EP series digital signal controller (DSC) delivering 60 MIPS performance with 128KB (43K x 24) of Flash program memory and 16KB of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package rated from -40C to +125C for extended-temperature, AEC-Q100 automotive applications. A digital signal controller combines the computational architecture of a microcontroller with DSP-grade math capability in a single chip. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs, executing control loops and signal-processing algorithms (filters, transforms) on one device. The dsPIC33E family is Microchip's high-performance 16-bit DSC line, designed specifically for precision motor control, digital power conversion, and embedded sensing systems that require deterministic real-time behavior. Key features include the enhanced dsPIC33E core with DSP engine and single-cycle MAC, integrated motor-control PWM peripherals, multiple UART/SPI/I2C communication modules, DMA channels, and a rich analog front end with a high-speed 10/12-bit ADC suited to current-loop sampling in motor drives. Flash program memory of 128KB supports complex FOC (field-oriented control) firmware with headroom for bootloader and diagnostics. Architecturally, the dsPIC33EP core pairs a 16-bit MCU pipeline with zero-overhead loop and hardware divide support, while peripheral Pin Mapping (PPS) allows flexible routing of digital peripherals to I/O pins, easing PCB layout trade-offs in dense 44-pin designs. Typical applications include brushless DC (BLDC) and PMSM motor control, digital SMPS and power-factor-correction converters, automotive body and powertrain ancillary control, and industrial sensing nodes where the -40C to +125C operating range is mandatory. Design consideration: at 60 MIPS the core draws its maximum current, so budget the 3.3V rail accordingly and follow Microchip's decoupling guidance for the VDD/VSS pairs in the TQFP footprint. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC204T-E/TL

DSPIC33EP128MC204T-E/TL - 16-Bit 60MIPS DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC204T-E/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS core performance with 128 KB (43K x 24) of Flash program memory and 16 KB of RAM, housed in a 44-pin VTLA (6x6 mm) exposed-pad surface-mount package. The tape-and-reel suffix (T) and extended temperature grade (E, -40C to +125C) make it suited for automotive-adjacent and industrial designs that reference AEC-Q100 and TS 16949 quality frameworks. A digital signal controller combines the computational strengths of a microcontroller with the arithmetic acceleration of a DSP. In the embedded system hierarchy, the dsPIC33EP sits above general-purpose 8-bit MCUs and beside 32-bit MCUs where deterministic control loops, fast multiply-accumulate operations, and motor-control peripherals matter more than raw processing throughput. Key features include the dsPIC33E CPU core with integrated DSP engine, four Direct Memory Access (DMA) channels that offload data movement from the CPU, and five timers for capture, compare, and PWM time bases. Serial connectivity covers I2C, SPI, UART/USART, plus IrDA, LINbus, and Quadrature Encoder Interface (QEI) - peripherals purpose-built for precision motor control where encoder feedback must be decoded in hardware. Architecturally, the CMOS-based dsPIC33E core executes an enhanced 16-bit instruction set with DSP instructions and supports Phase-Locked Loop clock multiplication to reach the 60 MHz internal core clock (60 MIPS) cited for this device. The 43K x 24 Flash organization reflects the 24-bit instruction word typical of dsPIC DSCs, and self-programming Flash supports field firmware updates. Typical applications include brushless DC and PMSM motor drives, digital power conversion (power factor correction, DC-DC), and sensor-based industrial control nodes that require deterministic interrupt latency and hardware QEI decoding. Design consideration: the 6x6 mm VTLA exposed pad is the primary thermal and ground path - connect it to a solid ground pour with multiple vias; also confirm supply-voltage range and peripheral counts against the manufacturer datasheet before layout sign-off. This page synthesizes distributor listings, package/footprint cross-references, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-23.

RFQ İletişim

DSPIC33EP128MC204T-I/ML

DSPIC33EP128MC204T-I/ML - 16-bit 70 MIPS DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128MC204T-I/ML is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 128KB (43K x 24) FLASH program memory and 16KB RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package rated from -40C to +85C. A digital signal controller combines the control peripherals of a microcontroller with the computational throughput of a DSP. Within the power-management hierarchy, the dsPIC33E family sits above general-purpose MCUs and below application processors, targeting closed-loop control systems. The dsPIC33EP128MC204 is a member of the Motor Control (MC) subfamily, which adds dedicated motor-control PWM hardware alongside standard ADC, UART, SPI and I2C peripherals. Key features include a 16-bit modified Harvard architecture executing up to 70 MIPS, integrated DSP engine with single-cycle MAC and 40-bit accumulators, four DMA channels that offload data movement from the CPU, and five general-purpose timers. The MC subfamily adds complementary or edge-aligned motor-control PWM outputs with dead-time insertion, essential for driving three-phase inverters. Technically, the CMOS device operates from a 3.0V to 3.6V single supply at core speeds up to approximately 60-70 MHz, using an internal PLL from an external crystal or internal oscillator. The 128KB self-programming FLASH supports field firmware updates, while 16KB of on-chip RAM buffers control loops and communication stacks. Typical applications include brushless DC and permanent-magnet synchronous motor drives, digital power supplies such as PFC and LLC converters, solar inverters, and industrial automation nodes requiring deterministic control-loop execution. Design consideration: the QFN exposed pad must be soldered to a grounded PCB thermal pad with multiple vias - it is both the primary ground return and heat-removal path; omitting it degrades signal integrity and thermal margin. This page synthesizes distributor pricing, drop-in family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet, with prices as of 2026-09-23.

RFQ İletişim

DSPIC33EP128MC204T-I/MV

DSPIC33EP128MC204T-I/MV - 16-bit 70 MIPS DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC204T-I/MV is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring a 70 MIPS DSP-enhanced core, 128KB (43K x 24) of Flash program memory, 16KB of RAM, and a 48-pin UQFN (6x6 mm) package with exposed pad. A digital signal controller combines the computational architecture of a microcontroller with the DSP engine of a digital signal processor. In the embedded systems hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes real-time control loops (PID, field-oriented control) while managing communication, state machines, and housekeeping tasks on a single chip. The dsPIC33EP family is Microchip's high-performance 16-bit DSC generation purpose-built for precision digital power and motor control. Key features of this device include the Motor Control PWM (MCPWM) peripheral for multi-phase inverter drive, integrated operational amplifiers and comparators that reduce external analog component count, a Peripheral Trigger Generator (PTG) for hardware-sequenced autonomous operation, and a 4-channel DMA controller that offloads data movement from the CPU. Five 16-bit timers and four external interrupt sources support complex sequencing and measurement tasks. Architecturally, the dsPIC33EP core pairs a 16-bit modified Harvard pipeline with a DSP engine providing single-cycle MAC, barrel shifter, and dual operand fetch, sustaining up to 70 MIPS from a 60 MHz clock. The Flash is ECC-enabled for functional safety-oriented designs. Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, totem-pole PFC), solar inverters, and industrial automation sensors. The MCPWM plus on-chip op-amps make it especially efficient for sensorless FOC implementations. Design consideration: the UQFN-48 exposed pad must be soldered to a grounded copper pour for both thermal dissipation and signal integrity; plan programming access via ICSP (PGD/PGC) pins early in layout. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the standard Microchip datasheet.

RFQ İletişim

DSPIC33EP128MC204T-I/PT

DSPIC33EP128MC204T-I/PT - 70 MIPS 16-bit DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128MC204T-I/PT is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33EP core, 128KB (43K x 24) FLASH program memory and 16KB RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package with industrial temperature rating (-40C to +85C). A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC and DSP instructions alongside standard control peripherals such as timers, UART, SPI, and I2C. The dsPIC33E family from Microchip is a successor to the dsPIC30F/33F generations and is widely used in real-time control loops. Key features of this part include the 70 MIPS 16-bit pipeline core with DSP engine, 128KB self-programmable flash with ECC, 16KB of RAM for data buffers, motor-control peripherals including PWM channels with complementary outputs, and connectivity interfaces covering I2C, SPI, UART/USART, IrDA, LINbus, and QEI (quadrature encoder interface). The /PT suffix denotes the 44-pin TQFP (10x10) package and tape-and-reel packing; the -I suffix denotes the industrial -40C to +85C operating range. Architecturally, the dsPIC33EP core supports single-cycle MAC operations, hardware division assist, and a rich interrupt vector table, enabling deterministic control-loop execution for field-oriented motor control, digital power conversion, and sensor signal processing. The enhanced peripheral set integrates high-resolution PWM, comparators, and ADC sampling tied to PWM triggers for tight loop latency. Typical applications include precision brushless DC and PMSM motor control, digital power supplies and PFC stages, and embedded industrial control nodes requiring DSP-grade math throughput in an MCU-class package. When designing with this device, budget flash and RAM early: the 128KB/16KB split is generous for control code but tight for protocol stacks plus data logging, so consider the 504-pinout variant (256KB flash) if headroom is a concern. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33EP128MC204T-I/TL

DSPIC33EP128MC204T-I/TL - 70MIPS 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC204T-I/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 128KB (43K x 24) of FLASH program memory and 16KB of RAM, housed in a 44-pin VTLA (6x6 mm) surface-mount QFN package. A digital signal controller combines the compute architecture of a microcontroller with DSP-capable instructions in a single chip. Within the power management hierarchy of embedded systems, the dsPIC33E family sits above general-purpose PIC MCUs and beside dedicated DSPs, offering a dsPIC DSC core with integrated DSP engine, hardware multiply-accumulate, and enhanced motor-control peripherals on one silicon die. Key features include a 16-bit dsPIC33E core running at up to 70 MIPS, 128KB of ECC-free self-programmable FLASH, peripheral features such as MCPWM (motor control PWM), integrated operational amplifiers, analog comparators, and connectivity via I2C, SPI, UART/USART, IrDA, LINbus, and QEI (quadrature encoder interface). These peripherals make the part particularly efficient for field-oriented motor control and closed-loop digital power conversion. Architecturally, the dsPIC33EP core provides single-cycle MAC, hardware divide support, and an extensive interrupt vector table, allowing deterministic real-time control loops. The integrated op-amps and comparators reduce external analog component count in current-sensing applications, while the MCPWM module generates complementary PWM outputs with dead-time insertion for three-phase inverter stages. Typical applications include precision motor control for industrial drives, brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control, digital power supplies, and embedded control systems requiring DSP filtering. The 44-pin VTLA footprint suits compact, thermally demanding designs. When designing with this device, verify flash and RAM budgets: the 128KB/16KB configuration is mid-range within the MC204 family, and the T suffix indicates tape-and-reel packaging for automated assembly. Thermal dissipation at 70 MIPS operation is moderate, but a solid ground plane under the QFN exposed pad is recommended. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim

Alt Kategoriler

Ürünler (39.000+)

DSPIC33EP128MC202-H/SO - 16-bit DSC 70 MIPS 128KB Flash | Microchip

DSPIC33EP128MC202-I/MM - 70 MIPS DSC, 128KB Flash | Microchip

DSPIC33EP128MC202-I/SO - 16-bit DSC 60MHz 128KB Flash | Microchip

DSPIC33EP128MC202-I/SP - 70 MIPS 16-bit DSC | Microchip

DSPIC33EP128MC202-I/SS - 16-bit 70 MIPS DSC 128KB | Microchip

DSPIC33EP128MC202T-E/MM - 16-bit 60 MIPS DSC 128KB Flash | Microchip

DSPIC33EP128MC202T-E/SO - 16-bit 60 MIPs DSC, 128KB Flash | Microchip

DSPIC33EP128MC202T-I/MM - 16-bit DSC, 128KB Flash | Microchip

DSPIC33EP128MC202T-I/SO - 16-bit 70 MIPS DSC, 128KB Flash | Microchip

DSPIC33EP128MC204-E/ML - 60 MIPS 16-bit DSC 128KB Flash | Microchip

DSPIC33EP128MC204-E/MV - 16-Bit 60 MIPS DSC 128KB Flash | Microchip

DSPIC33EP128MC204-E/PT - 16-bit 60 MIPS DSC 128KB | Microchip

DSPIC33EP128MC204-H/PT - 16-bit 60 MIPS DSC, 128KB Flash | Microchip

DSPIC33EP128MC204-H/TL - 16-bit DSC 128KB 70MIPS | Microchip

DSPIC33EP128MC204-I/ML - 16-bit DSC 70 MIPS 128KB Flash | Microchip

DSPIC33EP128MC204-I/PT - 70 MIPS 16-bit DSC | Microchip

DSPIC33EP128MC204-I/TL - 16-bit 70 MIPS DSC | Microchip

DSPIC33EP128MC204T-E/ML - 16-bit 60 MIPS DSC 128KB Flash | Microchip

DSPIC33EP128MC204T-E/PT - 16-bit 60MIPS DSC 128KB Flash | Microchip

DSPIC33EP128MC204T-E/TL - 16-Bit 60MIPS DSC, 128KB Flash | Microchip

DSPIC33EP128MC204T-I/ML - 16-bit 70 MIPS DSC 128KB | Microchip

DSPIC33EP128MC204T-I/MV - 16-bit 70 MIPS DSC 128KB Flash | Microchip

DSPIC33EP128MC204T-I/PT - 70 MIPS 16-bit DSC 128KB | Microchip

DSPIC33EP128MC204T-I/TL - 70MIPS 16-bit DSC 128KB Flash | Microchip