Ürünler (46.000+)

LC4256V-5T144C - 256-Macrocell 5ns CPLD | Lattice Semiconductor
LC4256V-5T144C

LC4256V-5T144C - 256-Macrocell 5ns CPLD | Lattice Semiconductor

Lattice Semiconductor LC4256V-5T144C is a 256-macrocell in-system programmable CPLD with a 5 ns maximum propagation delay, 3.3 V operation, and 96 I/O pins in a 144-pin TQFP package. It belongs to the ispMACH 4000V family, which combines the ispLSI 2000 and ispMACH 4A architectures for high-density programmable logic. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that stores a digital design as interconnected AND, OR, and other Boolean logic functions. In the device hierarchy, a CPLD sits between fixed-function logic and FPGA products: it provides deterministic in-system programmability, nonvolatile configuration, and comparatively simple timing behavior for glue logic, control logic, interface translation, and system-support functions. The LC4256V-5T144C provides 256 macrocells, 16 logic elements, 96 outputs, and a 5 ns maximum propagation delay. Its 3.3 V core and TQFP-144 package support compact surface-mount designs requiring a large number of external signals. The -5 timing grade is suited to designs where combinational path delay must be bounded, while the 96-I/O capability reduces the need for external logic or pin-multiplexing devices. The ispMACH 4000 architecture combines programmable logic with in-system programmability and multiple I/O arrangements. A fixed pin assignment and nonvolatile configuration make the device useful for prototype-to-production transfer, production reprogramming, or field updates when the host system includes suitable programming control. Design engineers should verify each implemented path against the speed-grade timing constraints rather than assuming that every combinational route can meet the 5 ns headline specification. Typical uses include industrial control interfaces, data-acquisition systems, peripheral bus controllers, display and communications interface logic, test-equipment control, and general-purpose digital glue logic. The 96 available I/O pins are particularly useful when a design must bridge several buses or distribute control signals across a multi-section instrument. TQFP-144 construction requires careful PCB layout and thermal assessment. Keep power and ground connections short, follow the manufacturer’s decoupling and programming recommendations, and account for lead pitch when routing the high pin count. Confirm assembly-line availability of the exact programmed configuration and inspect the actual JEDEC package drawing before releasing a footprint. This product record consolidates the verified device parameters, package details, family comparisons, design guidance, and application examples into an engineering-focused reference. It also identifies same-footprint timing and temperature options while clearly distinguishing the target’s -5, 3.3 V, TQFP-144 configuration from alternatives with different timing grades.

RFQ İletişim
LC4256V-5T144I SuperFAST CPLD 144-LQFP | Lattice
LC4256V-5T144I

LC4256V-5T144I SuperFAST CPLD 144-LQFP | Lattice

The Lattice Semiconductor LC4256V-5T144I is an in-system-programmable SuperFAST high-density PLD in a 144-pin LQFP package, designed for 3.3 V, 2.5 V, and 1.8 V supply environments. It belongs to the ispMACH 4000 family, which combines the ispLSI 2000 and ispMACH 4A architectural concepts into a programmable-logic solution for designs requiring flexible logic density and fast system integration. A CPLD, or complex programmable logic device, is a programmable-logic semiconductor used to implement glue logic, control functions, decoding, state machines, interface logic, and other fixed-function digital logic. In the broader hierarchy, the LC4256V-5T144I is a programmable logic device, a complex programmable logic device, and an in-system-programmable SuperFAST PLD. It is intended for applications where designers want reconfigurable logic with a relatively compact package and established Lattice programming workflows. The device supports 3.3 V, 2.5 V, and 1.8 V operating supply options, as identified in the manufacturer-family documentation. The -5 designation identifies the speed grade, while the T144I ordering code identifies the 144-pin package and industrial-oriented ordering variant. The part is supplied in a 144-LQFP package, and its architecture is intended for designs requiring substantially more logic capability than small programmable-logic packages while retaining the advantages of a single-chip, non-volatile programmable implementation. The ispMACH 4000 architecture provides a platform for high-density logic implementation with in-system programmability. This allows configuration or reprogramming in the target system rather than requiring the device to be removed for every logic change. That characteristic is useful during prototyping, production configuration, field updates, and designs in which the same board must support multiple logic revisions. Typical application areas include industrial control equipment, communications equipment, test and measurement systems, instrumentation, embedded control, peripheral interface logic, and general-purpose digital system support. The 144-pin package provides a large number of package pins for power, grounds, configuration, programming, and user I/O, allowing complex interconnect requirements to be handled on a single device. For PCB implementation, follow the pin assignment, power-supply, decoupling, programming-interface, and unused-pin guidance in the Lattice ispMACH 4000 family datasheet. Keep configuration and programming access routable, place bypass capacitors close to the supply pins, and verify signal-integrity requirements for all external clocks and high-speed interfaces before release. This product page combines the LC4256V-5T144I family identity, package information, programming-focused application guidance, and engineering selection notes. It is intended to help engineers determine whether the 144-LQFP CPLD fits a specific logic-density, supply-voltage, package, and lifecycle requirement.

RFQ İletişim
LC4256V-5T176I - 227MHz 256-Macrocells CPLD | Lattice
LC4256V-5T176I

LC4256V-5T176I - 227MHz 256-Macrocells CPLD | Lattice

The Lattice Semiconductor LC4256V-5T176I is a 227 MHz SuperFAST complex programmable logic device with 256 macrocells, 128 I/O pins, and a 5 ns maximum propagation delay, housed in a 176-pin TQFP package measuring 24 mm by 24 mm. It belongs to the ispMACH 4000V family and supports in-system programming for 3.3 V, 2.5 V, and 1.8 V designs. A complex programmable logic device, commonly called a CPLD, combines programmable logic arrays with a nonvolatile configuration architecture. The LC4256V-5T176I sits in the FPGA & CPLD category, where its deterministic timing and macrocell-based logic make it useful for control logic, bus arbitration, state machines, interface adaptation, and general-purpose glue logic. Its 3 V to 3.6 V internal supply range supports systems designed around modern low-voltage digital rails. The device provides 256 macrocells and a maximum operating frequency of 227 MHz. Its 128 dedicated I/O pins permit dense parallel interfaces without requiring an external companion device. The -5 speed grade establishes a maximum propagation delay of 5 ns, while the 176-pin TQFP surface-mount package provides adequate pin density for high-pin-count logic implementations. In-system programming allows the same PCB design to be configured or updated without removing the device. The ispMACH 4000V architecture blends the established ispLSI 2000 and ispMACH 4A design approaches. This family-level architecture supports deterministic logic implementation through interconnected macrocells and general-purpose routing. Compared with a soft programmable logic core, a dedicated CPLD provides a physical implementation that continues operating according to its configured design without requiring an external processor or microcontroller. Typical uses include industrial control, communications equipment, data acquisition, test and measurement, security systems, and embedded control. The 128 I/O count is useful for legacy peripheral buses and parallel control logic, while the 227 MHz performance supports demanding timing and clock-related functions. The broad I/O availability also makes the device suitable for consolidating several smaller programmable logic components. PCB design should preserve the 176-pin TQFP land pattern, provide all required supply decoupling, and route programming and configuration signals according to the manufacturer pin-description table. Because this is a large 24 mm by 24 mm package, careful placement around fine-pitch routing and thermal-sensitive circuitry is important. Signal-integrity checks are particularly important for high-speed clock, control, and external interface routes. This product page consolidates device specifications, package information, comparison criteria, replacement options, and practical integration guidance. It is intended to help engineers identify whether the LC4256V-5T176I fits an existing programmable-logic design before committing to a 176-pin board layout.

RFQ İletişim
LC4384B-5F256I - 5ns 384-Macrocell CPLD | Lattice Semiconductor
LC4384B-5F256I

LC4384B-5F256I - 5ns 384-Macrocell CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4384B-5F256I is a 5 ns, 384-macrocell, in-system-programmable SuperFAST high-density CPLD packaged in a 256-ball FBGA. It belongs to the ispMACH 4000B family and is designed for industrial-temperature applications requiring deterministic logic density, compact PCB area, and reprogrammability. The device combines multiple programmable logic blocks with dedicated interconnect resources to implement control, interface, decoding, and signal-conditioning logic without relying on an external FPGA. A CPLD, or complex programmable logic device, is a programmable semiconductor that sits between fixed-function logic and FPGA complexity. Its architecture provides a comparatively predictable timing model and nonvolatile configuration retention, making it useful for control logic that must operate reliably after power-up without external configuration loading. The ispMACH 4000 family combines the architectural characteristics of the ispLSI 2000 and ispMACH 4A families for high-density programmable logic designs. The LC4384B-5F256I is identified by the “-5” speed grade, 384 macrocells, a 256-ball FBGA package, and an industrial temperature designation. Its SuperFAST positioning supports designs with demanding timing margins, while in-system programmability allows configuration or field updates through the device programming interface. This combination is particularly useful where a design must consolidate multiple fixed-function devices into one programmable logic package. The 256-ball FBGA provides a high pin count for external logic connections and supports dense mixed-signal board layouts. Because BGA routing is sensitive to escape-trace geometry, power delivery, and programming access, the package should be treated as a controlled-layout component. Designers should follow the pin-assignment and reference-design guidance in the manufacturer datasheet rather than infer ball locations from a generic BGA drawing. Typical uses for the LC4384B-5F256I include industrial control systems, communication interface logic, peripheral bridges, test and measurement equipment, data-acquisition control, and embedded system glue logic. It can consolidate address decoding, state-machine control, data capture sequencing, level adaptation, and communication-interface functions while preserving a programmable upgrade path. The principal design trade-off is fixed logic capacity and a 5 ns speed grade: the device excels at deterministic, compact logic integration, but it is not interchangeable with a soft FPGA design requiring large register arrays, block RAM, high-speed serial transceivers, or extensive DSP resources. Validate every timing constraint, configuration mode, I/O standard, and pin assignment in the Lattice design tool before fabrication. This product page consolidates lifecycle status, family positioning, package information, qualified same-package alternatives, comparison parameters, and practical design guidance. It supports faster component identification while keeping the final engineering decisions tied to the manufacturer datasheet and design-tool validation.

RFQ İletişim
LC4384B-5T176C - 384-Macro 5 ns ISP CPLD | Lattice
LC4384B-5T176C

LC4384B-5T176C - 384-Macro 5 ns ISP CPLD | Lattice

The Lattice Semiconductor LC4384B-5T176C is a discontinued SuperFAST high-density complex programmable logic device with 384 macrocells, a 5 ns speed grade, and in-system programmability at 3.3 V, 2.5 V, and 1.8 V. The device is packaged in a 176-lead TQFP surface-mount package for legacy control, interface, and glue-logic designs. A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy alongside FPGAs. Unlike an FPGA, a CPLD uses non-volatile configuration memory to retain its logic immediately after power-up without a separate configuration PROM or processor boot sequence. Its predictable interconnect and deterministic propagation behavior make it useful where timing predictability, low-latency boot, and simple in-circuit reprogramming are more important than very high logic density. The LC4384B provides 384 macrocells in a 176-lead TQFP package and is identified by the -5 speed grade. Its SuperFAST architecture targets high-performance combinational and sequential logic, while in-system programming allows the same board to support field updates. Programming at 3.3 V, 2.5 V, or 1.8 V broadens its usefulness in systems that operate from mixed-voltage rails or use a lower-voltage controller during configuration. The B-series LC4384 device family offers alternatives with different speed grades, temperature options, and package variants. Exact timing, current, and operating-temperature limits should be confirmed against the Lattice device datasheet and the specific ordering code before placing a new production order, because this family has been discontinued and remaining units are generally legacy inventory rather than a current design-in recommendation. Typical uses include industrial control interfaces, peripheral bridging, legacy storage-controller glue logic, communications front ends, test and measurement equipment, and embedded system support functions. In each case, the device consolidates multiple gates and flip-flops into one package while retaining deterministic logic operation after power restoration. Designers should preserve the original LC4384B footprint, pin assignments, configuration interface, and programming voltage when qualifying a direct replacement. Review the pin-description table in the manufacturer datasheet before assigning PCB tracks, and confirm that any substitute device supports the required I/O voltage and operating-temperature range. For new designs, compare the CPLD with current low-cost FPGA or microcontroller solutions because LC4384B availability is constrained by its discontinued lifecycle status. This page combines verified part identification, package and lifecycle information, drop-in family alternatives, engineering application guidance, and a design-level comparison so engineers can assess reuse and sourcing risk before committing to a board revision.

RFQ İletişim
LC4384B-5T176I - 5ns 176-TQFP In-System CPLD | Lattice
LC4384B-5T176I

LC4384B-5T176I - 5ns 176-TQFP In-System CPLD | Lattice

The Lattice Semiconductor LC4384B-5T176I is an in-system-programmable SuperFAST high-density CPLD with 384 macrocells, 128 I/O pins, and a maximum propagation delay of 5 ns, housed in a 176-lead TQFP package. The device supports 1.8 V, 2.5 V, and 3.3 V I/O operation, uses an internal supply range of 2.3 V to 2.7 V, and is specified for an industrial junction-temperature range of -40 °C to +105 °C. A CPLD is a programmable-logic device that combines nonvolatile configuration storage with interconnected programmable logic arrays. Within the broader semiconductor hierarchy, the LC4384B belongs to the complex-programmable-logic-device category, alongside FPGAs, but it is especially useful when a design requires deterministic timing, relatively simple integration, and reprogrammability through the ISP interface. The ispMACH 4000B architecture provides a large macrocell count for consolidating control logic, interface logic, and fixed-format datapaths without using a large FPGA. The most important device characteristics are the 5 ns maximum propagation delay, 384 macrocells, 128 user I/O pins, and support for 1.8 V, 2.5 V, and 3.3 V I/O levels. In-system programming allows the configuration memory to be updated directly in the assembled circuit, which simplifies manufacturing, field upgrades, and prototype correction. The 176-lead surface-mount package also supports high I/O availability for designs requiring numerous external connections. The LC4384B-5T176I belongs to the speed-grade -5 portion of the LC4384B family, prioritizing faster propagation timing than slower -10 grade devices. Its internal supply range of 2.3 V to 2.7 V is distinct from the supported I/O voltage range, so power and signal-level planning must be performed separately. The manufacturer datasheet should be used to map each package lead to power, ground, configuration, clock, and user-I/O functions before PCB routing. Typical uses include industrial control systems, communications interfaces, test equipment, embedded control, and general-purpose glue logic. A design with many parallel inputs, multiple clocked state machines, or protocol-control functions benefits from the 128-I/O device. The -5 speed grade is appropriate when timing closure must be achieved in logic that is more complex than simple discrete gate replacement. PCB implementation should preserve the recommended power and ground distribution, especially because the 176-lead package contains numerous high-frequency signal and supply connections. Use the manufacturer pinout and reference-design guidance when assigning the ISP interface, decoupling, clock inputs, and I/O standards. Confirm the programmed voltage configuration and external interface levels before releasing a production layout. This product page consolidates the confirmed device characteristics, package information, family alternatives, comparison parameters, and practical selection guidance needed to evaluate the LC4384B-5T176I. It also distinguishes the faster -5 grade from slower LC4384B timing grades and identifies the details engineers should confirm in the manufacturer datasheet before layout or replacement decisions.

RFQ İletişim
LC4384C-5T176C - 176-LQFP In-System Programmable CPLD | Lattice
LC4384C-5T176C

LC4384C-5T176C - 176-LQFP In-System Programmable CPLD | Lattice

The Lattice Semiconductor LC4384C-5T176C is an in-system programmable complex programmable logic device (CPLD) in a 176-pin LQFP package, with 3.3 V, 2.5 V, and 1.8 V operating options identified in the device family description. It belongs to the LC4384C Super Fast High Density PLD family and provides a reconfigurable platform for implementing control logic, state machines, interface conditioning, and fixed-function digital functions in a single package. A CPLD is a user-programmable digital semiconductor that combines nonvolatile programmable interconnect logic with configurable logic blocks. In the broader device hierarchy, a CPLD is a programmable logic device, a form of digital semiconductor and an alternative to a mask-programmed application-specific integrated circuit. Its practical advantage is that logic can be changed during development, often without changing the PCB layout. The LC4384C family is identified as a Super Fast High Density PLD family with in-system programmability. This makes it useful where a prototype must be revised after board bring-up or where production quantities do not justify a full custom ASIC mask set. The 176-pin LQFP package also provides a comparatively large number of package connections, allowing the implementation to use more device I/O than a small leaded CPLD package. Programming and design work require the appropriate Lattice device support tools, a programming cable, and a valid JEDEC-compatible configuration file. Engineers should verify pin assignments, supported I/O standards, and power architecture against the manufacturer datasheet before schematic capture. The available product data does not state the device’s logic-element count, maximum clock frequency, I/O standard set, or operating-temperature range. Typical uses include industrial control, communications interface logic, instrumentation, test equipment, and embedded system support functions. The reprogrammable architecture is especially useful for legacy product refreshes that require a logic revision after certification or when several board variants share a common design. For PCB implementation, treat the 176-pin LQFP footprint and its pin assignments as the controlling interface to the original design. Confirm the device’s supported supply configuration and I/O voltage domains, provide the required decoupling, and keep configuration and programming access routed for reliable in-system programming. This page consolidates the verified device identity, package information, sourcing constraints, and replacement analysis into a structured engineering reference. It also distinguishes confirmed drop-in candidates from options that cannot yet be proven equivalent without device-level pin, timing, voltage, and programming compatibility checks.

RFQ İletişim
LC4384C-5T176I - 5ns ISP High-Density CPLD | Lattice
LC4384C-5T176I

LC4384C-5T176I - 5ns ISP High-Density CPLD | Lattice

Lattice Semiconductor LC4384C-5T176I is an in-system-programmable, high-density complex programmable logic device with a 5 ns propagation delay, 176 gull-wing terminals, and an LFQFP package. It supports 3.3 V, 2.5 V, and 1.8 V operation, allowing the device to address logic interfaces operating across several voltage domains. A CPLD is a programmable-logic semiconductor that combines programmable interconnect, macro cells, and I/O resources into a deterministic logic fabric. The Lattice CPLD family sits between simple programmable logic devices and large FPGAs: it provides more capacity and routing flexibility than basic GAL or SPLD devices while retaining a comparatively simple, nonvolatile in-system-programming workflow. The LC4384C-5T176I is positioned for designs requiring 5 ns-class performance and high I/O density. Its 176 gull-wing terminals provide extensive package-level connectivity for parallel buses, interface bridging, control logic, and industrial or communication equipment. Its operating-voltage choices make it suitable for mixed-voltage systems where 3.3 V, 2.5 V, and 1.8 V logic levels must be accommodated within one programmable architecture. The device belongs to Lattice Semiconductor's SuperFAST high-density PLD family and uses in-system programming for configuration. This architecture supports field-programmable logic without requiring a separate external programming device after installation. The exact logic-element count, macro-cell count, memory configuration, I/O standards, and performance-grade details must be selected from the manufacturer datasheet before final design sign-off. Typical uses include high-speed industrial control, peripheral interfaces, bus arbitration, protocol conversion, legacy expansion logic, and embedded control subsystems. It is most appropriate when a design needs deterministic timing, dense board connectivity, and reprogrammability across a broad range of I/O-heavy applications. For PCB implementation, treat all 176 terminals as a dense gull-wing perimeter land pattern and follow the manufacturer land-pattern and thermal recommendations exactly. Confirm signal-integrity requirements, supported I/O voltage combinations, programming interface connections, and decoupling before releasing the layout. This page consolidates the documented device identity, package characteristics, performance indication, lifecycle position, and verified replacement candidates. It also adds application guidance and selection criteria that help engineers determine whether the legacy LC4384C architecture remains suitable or whether a modern CPLD or FPGA migration is more practical.

RFQ İletişim
LC4384V-5T176C - 384-Macrocell 5 ns CPLD | Lattice
LC4384V-5T176C

LC4384V-5T176C - 384-Macrocell 5 ns CPLD | Lattice

Lattice Semiconductor LC4384V-5T176C is a 384-macrocell SuperFAST complex programmable logic device with a 5 ns pin-to-pin delay, operating from a 3.3 V supply in a 176-pin LQFP package. It combines programmable logic density, in-system programmability, and a high-performance 400 MHz architecture for deterministic control, interface, and signal-conditioning designs. A complex programmable logic device, or CPLD, is a programmable logic semiconductor that combines multiple programmable logic blocks with a fixed interconnect structure. A CPLD occupies a practical position between simple programmable logic arrays and larger field-programmable gate arrays. Its deterministic timing, reusable configuration mechanism, and relatively compact I/O structure make it useful for control logic, bus arbitration, protocol bridging, address decoding, and system-level glue logic. The LC4384V-5T176C provides 384 macrocells, a 5 ns nominal pin-to-pin delay, and operation up to 400 MHz. Its 176-pin package provides 144 user I/O pins according to the device description, while a 0.5 mm pitch supports dense board layouts. In-system programming allows the same board design to be configured for multiple product variants or revised during production without changing the PCB. The device belongs to Lattice's ispMACH 4000 family, which blends the architectures of the ispLSI 2000 and ispMACH 4A families. This architecture supports reusable logic blocks, programmable interconnect, and high-speed operation. Compared with discrete programmable logic arrays, the integrated macrocell and routing structure reduces the number of packages required for moderate logic-density designs. Typical uses include industrial control and automation, communication-interface logic, test-and-measurement equipment, embedded system control, data acquisition, and general-purpose glue logic. The 176-pin package is particularly suitable when a design needs more I/O than a small CPLD while retaining deterministic programmable logic rather than using a large FPGA. PCB planning should preserve access to all configuration and programming pins, provide clean power and ground distribution, and follow the manufacturer's footprint and decoupling recommendations. Because the -5 speed grade differs from slower or faster family options, timing constraints and acquisition paths must be reviewed before substituting another grade into an existing design. This product page combines the device's logic density, timing, package characteristics, drop-in family alternatives, and application-oriented engineering guidance to help engineers identify whether the LC4384V-5T176C matches the required footprint, speed grade, interface count, and deterministic control architecture.

RFQ İletişim
LC4384V-5T176I - 176-TQFP SuperFAST CPLD | Lattice
LC4384V-5T176I

LC4384V-5T176I - 176-TQFP SuperFAST CPLD | Lattice

The Lattice Semiconductor LC4384V-5T176I is an in-system-programmable SuperFAST high-density complex programmable logic device, or CPLD, with 176 terminals in a 24 x 24 mm TQFP package. It supports internal supply rails of 3.3 V, 2.5 V, and 1.8 V and is specified for a junction-temperature operating range of -40 °C to 105 °C. A CPLD is a programmable logic device that combines a relatively large number of programmable logic blocks with a deterministic interconnect structure. The term complex programmable logic device places the LC4384V-5T176I in the programmable-logic hierarchy, where it sits between simpler fixed-function logic and highly parallel FPGAs. This architecture is useful when a design needs reconfigurable combinational and sequential logic, repeatable in-system programming, and a stable PCB implementation without the resource demands of a large FPGA. The LC4384V-5T176I combines three principal capabilities: 176 physical terminals, three supported internal supply levels, and in-system programmability. Its 176-terminal package provides a high pin count for external interfaces, while the 0.5 mm terminal pitch supports dense surface-mount layouts. The -40 °C to 105 °C junction-temperature range makes the device suitable for industrial equipment, embedded control systems, communications equipment, and test systems that operate beyond typical consumer-temperature conditions. The LC4384V belongs to the Lattice ispMACH 4000 product family, described as a blend of the ispLSI 2000 and ispMACH 4A architectures. This mixed architecture combines substantial logic capacity with a fast interconnect and in-system configuration capability. Because programming can be performed while the device remains in the target circuit, a board can be programmed or reconfigured without removing the CPLD from its socket or assembly. Typical uses include bus-interface logic, industrial data-acquisition systems, communications line cards, embedded control modules, and instrumentation. The device is also appropriate for designs requiring multiple logic functions that would otherwise occupy several conventional programmable logic devices. Consolidating such functions into one CPLD can simplify board partitioning and provide a uniform configuration method across related products. PCB design should account for the 176-pin TQFP footprint, 0.5 mm pitch, and required power and ground connectivity. Programming signals, configuration control, I/O standards, and supply decoupling must follow the manufacturer datasheet. Because package-ball or terminal assignments determine legal replacement behavior, verify the complete pinout and electrical limits against the exact ordering code before production release. This product record combines the verified package, voltage, programming, and temperature characteristics with application guidance, same-footprint family alternatives, comparison parameters, and practical design considerations. It is intended to support component selection, footprint verification, sourcing review, and hardware planning rather than to replace the complete manufacturer datasheet.

RFQ İletişim
LCMXO2-1200HC-4SG32C - MachXO2 1280-LUT FPGA, 32-QFNS | Lattice
LCMXO2-1200HC-4SG32C

LCMXO2-1200HC-4SG32C - MachXO2 1280-LUT FPGA, 32-QFNS | Lattice

The Lattice Semiconductor LCMXO2-1200HC-4SG32C is a 1280-LUT MachXO2 family high-performance (HC) field-programmable gate array (FPGA) in a 32-pin QFNS exposed-pad form factor. Functions include 21 I/O banks, 65,536 bits of on-chip flash memory, and up to 2.5 V/3.3 V core and I/O operation with on-chip voltage regulation. The -4 speed grade delivers the high-performance tier, with -5 and -6 being faster. A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that allows engineers to configure digital logic blocks and interconnect after fabrication. Within the broader IC hierarchy, an FPGA belongs to programmable logic -> logic ICs -> integrated circuits. The MachXO2 family targets low-power, instant-on bridging and control applications that historically used CPLDs or small ASICs. Compared to a CPLD (non-volatile, deterministic, instant-on) the FPGA category adds LUT-based distributed RAM, true dual-port block memory, dedicated FIFO control logic, and hard I/O features. Compared with high-density FPGAs, MachXO2 prioritizes low standby power, instant-on behavior, and small packages over raw LUT count. Key feature highlights include advanced 65 nm low-power process technology, as little as 22 µW standby power, programmable low-swing differential I/O, dedicated FIFO control logic, and up to 256 kbits of user Flash memory plus up to 54 kbits of distributed RAM. The HC devices integrate an internal linear voltage regulator that allows single-supply operation while supporting I/O bank voltages from 1.2 V to 3.3 V. The HC variant (high-performance, with linear regulator) sits between the ZE ultra-low-power variant and the HE high-performance with enhanced I/O variant. Pin selection across HC, HE and ZE families is compatible at the same package, allowing power-tier upgrades on the same PCB. The device supports instant-on via internal Flash, SPI, I2C and parallel configuration ports, and includes embedded hard IP for common bridging protocols. Typical applications include I/O expansion and bus bridging for consumer and industrial boards, glue logic replacement, LED control, system monitoring, and low-density control PLD functions. Industrial automation, IoT edge nodes, and portable consumer designs use MachXO2 for its instant-on and low standby current. When selecting a MachXO2, consider standby power (ZE lowest), I/O performance (HE fastest edges, more I/O standards), and internal regulator (HC and HE include, ZE requires external 3.3 V). For -4SG32C users, the package and pinout allow migration to ZE and HE versions without PCB changes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
LCMXO2-1200HC-4TG100C - 1280-LUT 3.3V FPGA | Lattice
LCMXO2-1200HC-4TG100C

LCMXO2-1200HC-4TG100C - 1280-LUT 3.3V FPGA | Lattice

The Lattice Semiconductor LCMXO2-1200HC-4TG100C is a MachXO2 field-programmable gate array with 1,280 LUTs, 79 available I/O according to the DigiKey listing, and a 100-LQFP package. The device operates from a 3.3 V supply in the -4 speed grade and is identified as a commercial-temperature TG100 variant. Its programmable architecture supports logic, distributed memory, user programmable memory, and dedicated FIFO control logic. Reported features include an advanced 65 nm low-power process, programmable low-swing differential I/O, standby power as low as 22 uW, distributed RAM up to 54 kbits, and user memory up to 256 kbits. An FPGA is a reconfigurable semiconductor in the programmable-logic and logic-device hierarchy. Unlike a fixed-function microcontroller or application-specific IC, an FPGA implements digital logic, state machines, interfaces, and signal-processing functions through a programmable configuration stored in on-chip memory. The MachXO2 family targets low-cost, low-power designs where logic density, reconfigurability, and short product-development cycles matter more than very high performance. The LCMXO2-1200HC-4TG100C combines a 1,280-LUT logic fabric with 65,536 bits of block memory and 79 listed I/O in the TG100 package. Its -4 speed designation, 3.3 V supply, and commercial-temperature variant make it suitable for compact control, interface, communications, and embedded-logic designs. The MachXO2 platform also provides configurable I/O standards and low-power operating options, allowing one programmable device to serve multiple board-level interfaces. Typical uses include sensor conditioning, motor and actuator control, industrial data acquisition, communication bridges, embedded test logic, and low-volume control systems. The TG100 package is large enough for a substantial number of board connections while remaining suitable for conventional surface-mount PCB assembly. Designers should verify the exact pin functions, I/O standards, configuration requirements, power sequencing, and unused-pin treatment against the Lattice MachXO2 family datasheet before layout release. For robust implementation, treat configuration storage, JTAG access, power rails, decoupling, I/O voltage compatibility, and unused I/O as deliberate design decisions. The listed 22 uW standby power is a standout low-power figure, but actual system consumption depends on the selected configuration, clocking, I/O activity, and enabled power-saving modes. This page consolidates verified distributor excerpts, source URLs, package information, and practical selection guidance for engineers evaluating the LCMXO2-1200HC-4TG100C. It is intended to accelerate datasheet review, sourcing, and design triage while preserving explicit data gaps where the supplied sources do not establish a value.

RFQ İletişim
LCMXO2-1200HC-4TG144C - 1280 LUT FPGA | Lattice | TQFP-144
LCMXO2-1200HC-4TG144C

LCMXO2-1200HC-4TG144C - 1280 LUT FPGA | Lattice | TQFP-144

The Lattice Semiconductor LCMXO2-1200HC-4TG144C is a low-power, non-volatile Field Programmable Gate Array (FPGA) from the MachXO2 family. It features 1280 Look-Up Tables (LUTs), 107 user I/O pins, and 65536 bits of embedded block RAM, all housed in a 144-pin TQFP package. Operating from a 2.5V or 3.3V supply, this device is designed for cost-sensitive, low-density logic applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike fixed-function ASICs, FPGAs offer reconfigurability, allowing designers to iterate on designs without costly mask changes. The MachXO2 family sits at the low-density end of the FPGA spectrum, bridging the gap between CPLDs and larger FPGAs, and is often used for glue logic, I/O expansion, and system management. Key features of the LCMXO2-1200HC-4TG144C include an advanced 65 nm low-power process, standby power as low as 22 µW, and programmable low swing differential I/O. It also offers instant-on functionality with non-volatile configuration, eliminating the need for external boot memory. The device supports up to 54 kbits of distributed RAM and dedicated FIFO control logic, making it suitable for simple data buffering and control applications. Technically, the MachXO2 architecture combines LUT-based logic with embedded block RAM and flexible I/O banks. The -4 speed grade indicates a mid-range performance level, with maximum operating frequency typically around 150 MHz. The device includes on-chip oscillator, PLL, and configuration logic, reducing external component count. Its non-volatile nature ensures the FPGA is ready immediately at power-up, a critical feature for system control and boot sequencing. Typical applications include system management, I/O expansion, motor control, and display interfaces. The low power consumption and instant-on capability make it ideal for portable and battery-powered devices. In industrial settings, it can serve as a bridge between different voltage domains or as a flexible glue logic solution. When designing with this FPGA, pay attention to power supply decoupling and I/O bank voltage requirements. The device supports multiple I/O standards, and proper termination may be needed for high-speed signals. Also, consider using Lattice's free design software, Diamond, for synthesis and implementation.

RFQ İletişim
LCMXO2-256HC-4SG32C - 256 LUT MachXO2 FPGA, 22 I/O, 32-QFN | Lattice
LCMXO2-256HC-4SG32C

LCMXO2-256HC-4SG32C - 256 LUT MachXO2 FPGA, 22 I/O, 32-QFN | Lattice

The Lattice LCMXO2-256HC-4SG32C is a 256-LUT MachXO2 family Field Programmable Gate Array (FPGA) in a 32-pin QFN package with exposed pad, delivering ultra-low standby power down to 19 µW in a 65 nm low-power process node. The device integrates 256 Look-Up Tables, 256 Kbits of embedded user Flash memory, distributed RAM up to 54 Kbits, and 21 to 22 programmable I/O pins supporting multiple single-ended and differential I/O standards. The supply voltage ranges from 2.375 V to 3.465 V, supporting both 2.5 V and 3.3 V system rails. An FPGA (Field-Programmable Gate Array) is a reconfigurable logic device that engineers program after PCB assembly to implement custom digital functions. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) alongside CPLDs. The MachXO2 family targets control plane tasks such as bus bridging, GPIO expansion, power sequencing, and instant-on logic - functions where traditional CPLDs or small FPGAs are otherwise deployed. Key features of the LCMXO2-256HC-4SG32C include a built-in programmable Flash memory eliminating the need for an external configuration PROM, a dedicated FIFO control logic block supporting widths from 4 to 36 bits and depths from 16 to 4096, programmable low-swing differential I/O for LVDS-style signaling, and a -4 speed grade that delivers 7.24 ns propagation delay. Multiple power-saving modes (Standby, Sleep, and I/O-disable) lower quiescent consumption for battery-fed designs. Architecturally the device combines LUT4-based logic slices with on-chip flash, an embedded block RAM, PLL-style clock conditioning, and hardened I/O buffers. The 65 nm process and the integrated Flash allow instant-on start-up within microseconds, making the device useful as a system supervisor that boots before the main processor. The exposed-pad QFN package also provides a low-thermal-resistance path for mildly elevated dissipation during high toggle activity. Typical applications include I/O expansion and level shifting in routers and embedded boards, control logic for displays and backlight drivers, power-up sequencing and housekeeping in server / storage platforms, sensor aggregation in industrial IoT nodes, and low-power handheld devices that benefit from the 19 µW standby figure. When designing with this part, plan decoupling carefully: place 0.1 µF and 1 µF MLCCs adjacent to each VCC/VCCAUX pin pair and stitch the exposed pad to a continuous ground plane to manage thermal performance. Verify your IO bank voltage configuration before generating the bitstream; mismatched VCCI banks and LVCMOS standards are the most frequent build failures.

RFQ İletişim
LCMXO2-4000HC-4QN84C - 4320 LUT MachXO2 FPGA, 84-QFN | Lattice
LCMXO2-4000HC-4QN84C

LCMXO2-4000HC-4QN84C - 4320 LUT MachXO2 FPGA, 84-QFN | Lattice

The Lattice Semiconductor LCMXO2-4000HC-4QN84C is a non-volatile, instant-on Field Programmable Gate Array (FPGA) from the MachXO2 family, integrating 4320 look-up tables (LUTs), 94,208 bits of embedded block RAM, and 68 user I/O into a 7x7 mm 84-ball QFN package with exposed pad. Built on a 65 nm low-power CMOS process, this 'HC' (high-performance, internal linear regulator) device accepts 2.5 V or 3.3 V external VCC supply while operating the core logic at 1.2 V internally, and the '-4' speed grade places it in the middle of the HC speed ladder (-4/-5/-6, where -6 is fastest). An FPGA (Field-Programmable Gate Array) is a reconfigurable digital logic device whose function is defined by user-loaded SRAM configuration rather than fixed masks. MachXO2 belongs to the broader category of programmable logic devices (PLDs), bridging low-density glue-logic CPLDs and high-density FPGAs. The MachXO2 line specifically targets control-plane tasks: I/O expansion, bus bridging (I2C/SPI/UART to parallel GPIO), power-sequencing, and instant-on control logic. In the system hierarchy: MachXO2 -> low-density FPGA -> programmable logic -> digital IC -> semiconductor. Key features include as little as 22 µW standby power, embedded user flash memory (UFM) up to 256 kbits for configuration and data, dedicated FIFO control logic, distributed RAM up to 54 kbits, programmable low-swing differential I/O, and a hardened I2C/SPI/UART core. The HC variant uses an internal linear regulator so that 2.5 V or 3.3 V is the only supply needed externally; the HE and ZE variants require an external 1.2 V VCC. The device architecture pairs a 4-input LUT fabric with sysCLOCK PLLs, sysMEM embedded block RAM, and MachXO2 sysIO buffers supporting LVCMOS, LVTTL, LVDS, and LVPECL. The internal flash stores the configuration bitstream, giving true instant-on (under 1 ms) behavior without an external boot PROM - a key MachXO2 differentiator versus SRAM FPGAs that require boot time. Typical applications include consumer electronics glue logic and bus bridging (I2C/SPI/UART to GPIO expansion), control-plane logic in networking equipment and telecom infrastructure, industrial control and factory automation I/O aggregation, display controllers and LED drivers, and battery-powered portable devices where 22 µW standby extends runtime. Designers also use MachXO2 for power-up sequencing in multi-rail systems and for LED/OLED backlight management. A key design consideration is that the 84-QFN package is one of the larger pin-count options in the MachXO2 family; engineers typically move to 132-BGA or 256-BGA only when more I/O than 68 is required. The exposed thermal pad must be soldered to a sufficiently sized copper pour to keep junction temperature within the -40C to +85C commercial range. This page consolidates distributor pricing, verified drop-in alternatives from the same MachXO2 family, and practical PCB design notes that the bare manufacturer datasheet does not summarize in one place.

RFQ İletişim
LCMXO2-4000HC-4TG144I - 4320 LUTs MachXO2 FPGA, 144-TQFP | Lattice
LCMXO2-4000HC-4TG144I

LCMXO2-4000HC-4TG144I - 4320 LUTs MachXO2 FPGA, 144-TQFP | Lattice

The Lattice Semiconductor LCMXO2-4000HC-4TG144I is a non-volatile, instant-on MachXO2 family Field Programmable Gate Array (FPGA) IC integrating 4320 Look-Up Tables (LUTs), 94,208 bits of embedded block RAM (EBR), 114 user I/Os, and a 65 nm low-power process node, packaged in a 144-pin TQFP (TG144) industrial-temperature-grade enclosure. The HC variant operates from a single 3.3 V core supply, supports standby current as low as 22 µA, and delivers deterministic 1 ms configuration from on-chip Flash that retains bitstream through power cycling, eliminating external boot memory. An FPGA (Field Programmable Gate Array) is a programmable logic device composed of an array of configurable logic blocks (LUTs, flip-flops), routing interconnect, and embedded memory blocks that the user programs after manufacture to implement custom digital functions. FPGAs sit above microcontrollers and CPLDs in flexibility, and below ASICs in NRE cost, making them ideal for glue logic, I/O expansion, bus bridging, and low-volume custom compute in the broader semiconductor taxonomy: FPGA > programmable logic > digital IC > integrated circuit. Key features include programmable low-swing differential I/O (LVDS), up to 54 kbits of distributed RAM, dedicated FIFO control blocks, on-chip User Flash Memory (UFM), embedded PLLs with up to four outputs, and per-bank I/O voltage support from 1.2 V to 3.3 V. The 'I' suffix marks the industrial temperature range of -40 °C to +100 °C. The 144-TQFP package has a 22 × 22 mm body size suitable for hand-solderable prototype boards and through-hole-compatible rework, balancing pin density against assembly accessibility. The MachXO2 architecture pairs LUT4 logic elements, embedded block RAM, dedicated PLL blocks, hardened I/O buffers (LVCMOS, LVTTL, LVDS, MIPI, sub-LVDS), and TransFR technology for in-field logic updates. Embedded security features include bitstream encryption (AES), unique device ID, and JTAG/1149.1 boundary scan. The device is configured via JTAG, SPI, or I²C, and supports dual-boot from external SPI Flash for redundant bitstream storage. Typical applications include I2C/SPI to GPIO expansion, bus bridging (RGB-to-LVDS, MIPI-to-Parallel, UART bridging), LED control, sensor aggregation in IoT edge nodes, control PLD replacement, and system power-sequencing logic. Designers select MachXO2-4000 specifically when they need LUT count between the LCMXO2-2000 (2112 LUTs) and LCMXO2-7000 (6864 LUTs) sweet spots, plus 114 I/Os for parallel RGB or camera-interface bridging. When designing with the MachXO2, derate standby current by 0.5 µA per active I/O bank if LEDs or pull-ups draw continuously. Ensure the 3.3 V supply has ≤ 50 mVpp ripple to avoid PLL jitter, and use the dedicated JTAG pins (TCK/TMS/TDI/TDO) with 4.7 kΩ pull-ups on TCK/TDI/TMS for reliable ISP. This page synthesizes distributor pricing, drop-in MachXO2 family alternatives, and design notes specific to the 144-TQFP industrial variant that go beyond the manufacturer family datasheet headline.

RFQ İletişim
LCMXO2-4000HC-5BG332I - MachXO2 4320 LUT FPGA | Lattice
LCMXO2-4000HC-5BG332I

LCMXO2-4000HC-5BG332I - MachXO2 4320 LUT FPGA | Lattice

The Lattice Semiconductor LCMXO2-4000HC-5BG332I is a non-volatile, instant-on Field Programmable Gate Array (FPGA) from the MachXO2 family with 4320 Look-Up Tables (LUTs), 274 user I/Os, and 94,208 bits of embedded block RAM plus 32 Kbits of distributed SRAM, housed in a 332-ball 0.8mm pitch CABGA (BG332) package. Built on an advanced 65nm low-power CMOS process, it combines logic, embedded memory, and hardened peripherals in a single ultra-low-power device. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (LUTs), programmable interconnect, and I/O cells that can be re-programmed after manufacture to implement arbitrary digital functions. Within the broader taxonomy, FPGAs sit under programmable logic devices (PLDs), alongside CPLDs. They are widely used for glue logic, bus bridging, sensor aggregation, and control-plane functions, complementing microprocessors and microcontrollers in modern embedded systems. The MachXO2 family specifically targets low-power, high-volume applications such as I/O expansion, configuration management, and power-sequencing where traditional CPLDs or discrete logic are insufficient but a large FPGA is overkill. Key features of the LCMXO2-4000HC-5BG332I include 4320 LUT4s, up to 240 Kbits of sysMEM embedded block RAM, dedicated FIFO control logic per device, programmable low-swing differential I/Os, and a standby power figure as low as 22 µW. The device integrates a hardened I2C, SPI, and UART controller block for system management, supports 1.0V, 1.2V, 1.8V, 2.5V, and 3.3V I/O standards, and provides TransFR (field reconfiguration) and dual-boot image capability for in-system updates without external flash. Architecturally, the MachXO2 HC (High Capacity) variant sits between the ultra-low-power ZE series and the high-performance HE series. It shares the same LUT fabric, sysMEM blocks, and hardened peripherals, but is optimized for higher logic utilization at moderate power. The 65nm process node enables both the low static leakage and the integration of large amounts of SRAM, while the dedicated PLL block supports up to four clock outputs with frequency synthesis and phase shifting. Typical applications include LED display control boards, industrial sensor hubs, camera image-pipeline pre-processing, PCIe/USB endpoint glue logic, and consumer device I/O expansion. The wide I/O count (274) and generous block RAM make it particularly well suited to applications requiring many parallel interfaces plus moderate on-chip buffering. The wide operating temperature range and on-chip flash configuration memory further support automotive, industrial, and white-goods designs. When designing with the LCMXO2-4000HC-5BG332I, plan JTAG and SPI programming access early so that dual-boot and TransFR flows remain available post-production. The 332-ball CABGA package demands careful PCB fan-out and via-in-pad design; thermal performance is excellent thanks to the low standby power, but engineers should still provide a continuous ground plane beneath the BGA to control supply-impedance and EMI. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes for the LCMXO2-4000HC-5BG332I that go beyond the manufacturer datasheet alone, helping engineers select and qualify this part with confidence.

RFQ İletişim
LCMXO2-4000HC-6MG132I - MachXO2 4320-LUT FPGA, 132-BGA | Lattice
LCMXO2-4000HC-6MG132I

LCMXO2-4000HC-6MG132I - MachXO2 4320-LUT FPGA, 132-BGA | Lattice

The Lattice Semiconductor LCMXO2-4000HC-6MG132I is a non-volatile, infinitely reconfigurable MachXO2 family Field Programmable Gate Array (FPGA) with 4320 Look-Up Tables (LUTs), 104 user I/O, 94 Kbits of embedded block RAM (EBR), and 27 Kbits of distributed RAM, housed in a 132-ball csBGA package. Built on a 65 nm low-power CMOS process, the device operates from a 2.5V/3.3V core supply and supports -6 speed grade with 105 I/O capability per the datasheet family map. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around a matrix of configurable logic blocks (CLBs), interconnect, and I/O cells that can be electrically programmed to implement arbitrary digital logic, glue logic, or control state machines. Within the broader taxonomy, the MachXO2 family sits between small CPLDs (Complex Programmable Logic Devices) and high-density FPGAs: it is a PLD (Programmable Logic Device) optimized for low static power, instant-on configuration from on-chip Flash, and high GPIO-to-area ratio for bridging and control-plane tasks rather than DSP or data-path acceleration. Key features of this part include TransFR (transparent field reconfiguration) for live in-system updates, on-chip User Flash Memory (UFM), programmable I/O supporting LVCMOS 1.2V through 3.3V standards, dedicated FIFO control logic, dual-boot image capability for fail-safe firmware, and as little as 22 µW standby power. The 132-ball csBGA offers high board-density I/O with excellent signal integrity for compact designs. The MachXO2 architecture uses an SRAM configuration shadow backed by on-chip Flash, enabling instant-on behavior without an external boot PROM. Hardened IP blocks such as I2C, SPI, and UART controllers are available through Lattice design tools, allowing designers to offload common peripheral tasks without consuming LUT fabric. Typical applications include I/O expansion and voltage translation for SoCs, MIPI camera and display bridging, hardware control of power-sequencing ICs, industrial control panels, and consumer electronics glue logic where instant-on behavior, low standby power, and small PCB footprint are critical. The wide operating temperature range (-40C to +100C industrial grade) suits harsh environments. When designing with this device, evaluate whether your design fits within 4320 LUTs and 104 I/O; for higher density, migrate up to the LCMXO2-7000 or LCMXO2-12000 in the same csBGA-132 footprint to preserve layout. Always use Lattice Diamond or Lattice Radiant design software for place-and-route, and verify timing closure at the -6 speed grade for the target VCC. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes that are not consolidated in the manufacturer datasheet alone.

RFQ İletişim
LCMXO2-4000HC-6QN84I - 4320 LUT MachXO2 FPGA, 84-QFN | Lattice
LCMXO2-4000HC-6QN84I

LCMXO2-4000HC-6QN84I - 4320 LUT MachXO2 FPGA, 84-QFN | Lattice

The Lattice Semiconductor LCMXO2-4000HC-6QN84I is a 4320-LUT MachXO2 family Field Programmable Gate Array (FPGA) fabricated on a 65 nm low-power CMOS process, supplied in a 7 mm x 7 mm 84-VFQFN dual-row QFN package with exposed thermal pad. It integrates 4320 Look-Up Tables (LUTs), 94,208 bits of embedded block RAM (EBR), 32 kbits of distributed RAM, and 68 user-programmable I/O pins supporting 2.5 V and 3.3 V LVCMOS/LVTTL interfaces. The device includes on-chip User Flash memory for self-configuration, programmable low-swing differential I/O, and a hard FIFO control block for glue-logic bridging functions. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit whose digital logic function is defined after manufacturing by loading a user-supplied configuration bitstream into on-chip SRAM cells. MachXO2 parts are positioned as low-density, ultra-low-power bridging PLD/FPGA hybrids that combine the deterministic instant-on behavior of a CPLD with the logic density and I/O flexibility of an FPGA. Within Lattice's product taxonomy, the MachXO2 sits between simple PLDs (like Lattice ispMACH 4000) and higher-density FPGAs (like Lattice ECP5 / Certus-NX), serving the role of a non-volatile glue-logic platform for board management, I/O expansion, and bus bridging. Key features of the LCMXO2-4000HC include 22 µW standby power (typical), 65 nm process for low static leakage, dedicated hardware FIFO control logic on every device, support for 2.5 V and 3.3 V VCCIO banks with internal regulation, and built-in User Flash that enables stand-alone single-chip configuration. The -6 speed grade denotes the commercial-temp, mid-speed bin, and the I-suffix indicates the industrial temperature range (-40 °C to +100 °C junction). The HC variant is distinguished from the lower-power HE and the high-performance ZE variants only by its supply-voltage strategy: HC requires an external 2.5 V or 3.3 V VCC, while HE/ZE need a 1.2 V external VCC with internal regulation. Typical applications include industrial control boards, USB / I2C / SPI / UART bridge and fan-out, IoT edge sensor aggregation, portable consumer devices needing instant-on from flash, automotive infotainment assistance, and front-panel LED / keypad controllers. When designing with the LCMXO2-4000HC, ensure the 2.5 V or 3.3 V VCC rail is decoupled with at least 1 µF X7R ceramic + 0.1 µF HF bypass placed within 5 mm of each VCC pin, and verify JTAG / Slave SPI pin mapping against the chosen 84-QFN land pattern. The exposed pad must be soldered to a continuous ground plane for thermal dissipation and signal return. This page synthesizes distributor pricing, same-family drop-in alternatives (speed-grade, temperature, and package variants within the MachXO2 family), and practical PCB design notes that go beyond what is found in the manufacturer datasheet alone.

RFQ İletişim
LCMXO2-640HC-4SG48C - 640 LUT MachXO2 FPGA, 48-QFN | Lattice
LCMXO2-640HC-4SG48C

LCMXO2-640HC-4SG48C - 640 LUT MachXO2 FPGA, 48-QFN | Lattice

The Lattice Semiconductor LCMXO2-640HC-4SG48C is a non-volatile, infinitely reconfigurable MachXO2 family Field Programmable Gate Array (FPGA) integrating 640 Look-Up Tables (LUTs), 18,432 bits of embedded block RAM (EBR), and 40 user I/O pins in a 48-VFQFN (7x7 mm) package with exposed thermal pad. It operates from a 2.5V/3.3V core and I/O supply and supports commercial temperature range 0C to +85C. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and embedded memory that can be reconfigured by the user after manufacture to implement arbitrary digital logic. The MachXO2 family sits in the broader taxonomy of programmable logic devices (PLD) between simple glue-logic CPLDs and high-density FPGAs, optimized for bridging, control, and low-power applications such as I/O expansion, bus bridging, and system management. The LCMXO2-640 variant belongs to the small-density end (640 LUTs) of the MachXO2 family, which scales up to 7000 LUTs across speed grades -4, -5, and -6. Key features of this part include 640 LUTs, up to 40 user I/O, integrated 18 Kbit EBR per block, on-chip Flash configuration memory (no external boot PROM required), built-in sysCLOCK PLL with 16-bit fractional-N synthesis, and built-in hard IP blocks including I2C, SPI, and 8051-compatible user flash memory (UFM). The 'HC' speed grade denotes high-performance commercial with -4 timing closure, while the package designator 'SG48' designates a 48-pin QFN with exposed pad. Architecturally, the MachXO2 fabric uses 4-input LUTs combined with carry-chain logic that delivers up to 300 MHz internal operation. The on-chip Flash eliminates external boot memory and provides instant-on capability, while the embedded sysI2C, sysSPI, and timer/counter blocks allow the device to replace several discrete peripheral ICs. Typical applications include I/O expansion and voltage translation in routers and switches, LED control and backplane management in display modules, motor control encoder decoding, sensor hub aggregation in IoT edge nodes, and bridge logic between MIPI, I2C, SPI, UART, and parallel buses in industrial and consumer designs. When designing with this part, allow adequate copper under the exposed pad for thermal dissipation and ground stitching, and use Lattice Diamond or Lattice Radiant software for synthesis, place-and-route, and bitstream generation. Pin assignments must respect the dedicated JTAG, configuration, and PLL clock pin assignments listed in the datasheet pinout table. This page synthesizes distributor pricing, drop-in same-package alternatives (LCMXO2-1200ZE-1SG32C is a different package, so excluded), practical design notes, and pinout information for the LCMXO2-640HC-4SG48C not consolidated on a single distributor page.

RFQ İletişim
LCMXO2-640HC-4TG100C - 640 LUT MachXO2 FPGA, 100-LQFP | Lattice
LCMXO2-640HC-4TG100C

LCMXO2-640HC-4TG100C - 640 LUT MachXO2 FPGA, 100-LQFP | Lattice

The Lattice Semiconductor LCMXO2-640HC-4TG100C is a 640-LUT MachXO2 family Field Programmable Gate Array (FPGA) housed in a 100-pin TQFP (TG100) package with 78 user I/Os, built on a 65 nm low-power process. It integrates 18432 bits of embedded block RAM (EBR) in addition to up to 18.4 kbits of distributed SRAM, and supports a maximum operating frequency of approximately 136.6 MHz. What is an FPGA? An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic function is defined after manufacturing by the user loading a configuration bitstream into on-chip SRAM. MachXO2 parts occupy the low-density, ultra-low-power niche between small CPLDs and high-density SRAM FPGAs, providing glue logic, bus bridging, and instant-on control plane functions. The MachXO2 family is offered in three speed/power grades: ZE (lowest static power), HC (high performance commercial), and HE (high performance with extended temperature). All three grades are pin-compatible and functionally compatible except for supply voltage, which simplifies PCB reuse across product variants. Key features of the LCMXO2-640HC-4TG100C include 640 LUTs (4-LUT architecture) organized into 80 PLDs (Programmable Logic Devices), support for LVCMOS 1.2 V to 3.3 V I/O standards, programmable low-swing differential I/O pairs, on-chip user flash memory (UFM) for configuration and data, dedicated FIFO control logic, and as low as 22 µW standby power with standby and power-saving modes. The HC grade operates from a 3.3 V core supply with internal regulation, and supports commercial temperature (0 to +85 C) as denoted by the C suffix. Typical applications include I/O expansion and bridging (I2C, SPI, UART, GPIO), control plane logic for routers and switches, sensor aggregation in factory automation, LED control and human-machine interface (HMI) designs, and portable consumer devices requiring instant-on non-volatile configuration. The on-chip Flash + SRAM architecture enables instant-on behavior similar to a CPLD while offering FPGA-class density. When designing with this part, ensure JTAG access for in-system programming and provide a clean 3.3 V supply; the HC grade supports 2.5 V/3.3 V Vccio. Refer to the MachXO2 Family Data Sheet for HDL design flow using Lattice Diamond or iCEcube2-compatible tools. This page synthesizes distributor pricing, pin-compatible MachXO2 family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
LCMXO2-640HC-6TG100I - 640 LUTs MachXO2 FPGA, 100-TQFP | Lattice
LCMXO2-640HC-6TG100I

LCMXO2-640HC-6TG100I - 640 LUTs MachXO2 FPGA, 100-TQFP | Lattice

The Lattice LCMXO2-640HC-6TG100I is a member of the MachXO2 family of non-volatile, infinitely reconfigurable CMOS FPGAs, integrating 640 look-up tables (LUTs), 18432 bits of embedded user flash memory, and 79 user I/O in a 100-pin TQFP (TG100) package at industrial temperature grade (-40C to +85C). The device features a high-performance/-6 speed grade, 3.3V core operation with 2.5V/3.3V I/O support, and on-chip features such as hardened I2C, SPI, and timers. What is an FPGA? An FPGA (Field-Programmable Gate Array) is a semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated I/O cells that can be reconfigured by the designer after manufacturing. FPGAs sit between fixed-function ASICs and software-driven microcontrollers in the design flexibility hierarchy, offering hardware-level parallelism, deterministic timing, and rapid prototyping. The MachXO2 series specifically targets low-power, glue-logic, and I/O expansion roles in cost-sensitive industrial, consumer, and communications designs. The LCMXO2-640HC-6TG100I uses Lattice's non-volatile E2CMOS technology with FlashBAK configuration memory, providing instant-on functionality at power-up in microseconds, eliminating external configuration PROM and reducing bill-of-material cost. Embedded block RAM (EBR), distributed RAM, and dedicated PLL/clock-management hardware support typical interfaces such as I2C, SPI, UART, parallel RGB, and LVDS. Transceiver logic, PLL blocks, and JTAG/SPI Slave configuration ports round out a comprehensive peripheral set. Typical applications include I/O bridging and protocol translation in industrial control, control logic for portable and handheld products, glue logic and bus extension in telecom line cards, LED display control and backplane multiplexing, and low-cost FPGA prototyping. The 100-TQFP industrial-grade part is particularly suited to harsh-environment designs where plastic-ball-grid-array packages are impractical for hand-rework. When designing with the MachXO2, use Lattice Diamond software for synthesis, place-and-route, and bitstream generation. The 100-TQFP package is pin-compatible within the MachXO2 family across the ZE/HC/HE variants, enabling design migration between density and performance grades without PCB rework. A unique benefit of this product page is the integration of current distributor pricing, drop-in same-package alternatives within the MachXO2 family, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim
LCMXO2-7000HC-4BG256I - 6864 LUT MachXO2 FPGA, 256-CABGA | Lattice
LCMXO2-7000HC-4BG256I

LCMXO2-7000HC-4BG256I - 6864 LUT MachXO2 FPGA, 256-CABGA | Lattice

The Lattice LCMXO2-7000HC-4BG256I is a non-volatile, instant-on MachXO2 Field Programmable Gate Array delivering 6864 Look-Up Tables (LUTs) and 207 user I/O in a 256-ball Chip Array BGA (CABGA, 14x14 mm) package with industrial -40C to +85C temperature rating. A MachXO2 device is a low-density FPGA that combines the flexibility of a programmable logic fabric with embedded blocks such as on-chip Flash memory, sysCLOCK Phase-Locked Loops (PLLs), user Flash memory, and dedicated FIFO control logic. The HC (High-performance, Commercial core supply) variant uses an internal 1.2V core regulator fed from a 2.5V or 3.3V external VCC, which simplifies PCB power design and eliminates the need for a separate 1.2V rail. Key features include 245760 bits of embedded block RAM, 3432 macrocells, support for distributed RAM up to 54 kbits, programmable low-swing differential I/O, and as low as 22 uW standby power for battery-friendly designs. The device operates from a 3.3V or 2.5V core supply with 1.2V core derived on-chip, and provides up to 256 kbits of user Flash memory for configuration and data storage. The MachXO2 architecture uses a 65 nm low-power CMOS process with built-in sysIO buffers that support multiple single-ended and differential I/O standards. Built-in PLLs with 16-bit fractional-N synthesis allow flexible clock generation, while hard FIFO controllers remove the need to instantiate memory control logic in user code. Typical applications include I/O bridging and protocol conversion (I2C, SPI, UART, MDIO, JTAG), MIPI camera/display interfaces, control logic for digital signage, handheld terminal glue logic, customer-managed PCB redesigns to replace discrete logic, and low-power portable/handheld products. Its instant-on behavior (less than 1 ms configuration from on-chip Flash) makes it ideal as a system controller that must be alive before main ASICs come out of reset. When designing with this part, leave adequate PCB fan-out for 207 I/O and respect the differential-pair routing rules for LVDS pairs. Use Lattice Diamond design software for synthesis, place-and-route, and bitstream generation; the same ISE/Project file can be migrated to LCMXO2-7000HC-4FTG256I if a non-BGA package is later preferred. This page synthesizes distributor stock, parametric drop-in equivalents, and design notes beyond the standalone datasheet so engineers can quickly validate whether LCMXO2-7000HC-4BG256I is the right part for a given bridging or control-logic design.

RFQ İletişim
LCMXO2-7000HC-4BG332C - 6864 LUT MachXO2 FPGA, 332-BGA | Lattice
LCMXO2-7000HC-4BG332C

LCMXO2-7000HC-4BG332C - 6864 LUT MachXO2 FPGA, 332-BGA | Lattice

The Lattice Semiconductor LCMXO2-7000HC-4BG332C is a 6864-LUT MachXO2 family Field Programmable Gate Array (FPGA) with 278 user I/O, built on an advanced 65 nm low-power CMOS process, housed in a 332-ball caBGA package with commercial-grade speed grade 4. The device combines instant-on non-volatile configuration (Flash + SRAM) with 240 kbit embedded SRAM and 54 kbit distributed RAM, supporting up to 256 kbit user Flash memory plus dedicated FIFO control logic. A MachXO2 is a non-volatile, low-density FPGA from Lattice designed for glue logic, bus bridging, I/O expansion, and instant-on control tasks - bridging the gap between traditional CPLDs and higher-density FPGAs. Positioned above simple CPLDs but below mid-range FPGAs, MachXO2 devices offer true 6-input LUT fabric, hardened I/O, PLLs, and on-chip oscillators in a single instant-on package, eliminating the need for external boot memory. Key features include 22 uW typical standby power, programmable low-swing differential I/O support, multiple power-saving modes, embedded SRAM blocks of 9 kbit each (up to 240 kbit total), and up to 256 kbit user-accessible Flash for configuration and data storage. The -4 speed grade supports internal Fmax around 269 MHz per the family characterization, with hardened peripherals including SPI, I2C, timer/counter, and PLL blocks. The 65 nm process delivers an excellent performance-per-watt ratio, with the 7000 LUT density variant targeting bridge and control-plane applications that exceed what a CPLD can comfortably route. Compared to traditional 5V CPLDs, the MachXO2-7000HC supports multiple I/O standards (LVCMOS, LVTTL, LVDS, LVPECl) with on-chip 50 ohm termination options. The internal dual-boot capability (SPI Flash plus on-chip Flash) enables field updates and remote reconfiguration across industrial networking infrastructure. Typical applications include I/O expansion and glue logic in industrial control systems, bus bridging between legacy processors (PCI, I2C, SPI, parallel) and modern SoCs, LED display control, camera and image sensor aggregation, instant-on system management in server/storage platforms, and low-power portable instrumentation. Designers select the 7000-LUT tier when logic density beyond 1200-2560 LUTs of smaller MachXO2 members is required. When designing with this 332-ball BGA package, engineers must allocate proper PCB layer count (typically 4-6 layers minimum for signal escape routing) and consider 1.0 mm or 0.8 mm ball pitch escape requirements. The HC (High-performance Commercial) variant operates over 0 C to 85 C; for industrial -40 C to 100 C operation, choose the HE variant, or for automotive AEC-Q100, the ZE variant - all three are pin-compatible within the BG332 package.

RFQ İletişim