Ürünler (46.000+)

LM2902MX/NOPB - 26V 1.2MHz Quad Op Amp | Texas Instruments
LM2902MX/NOPB

LM2902MX/NOPB - 26V 1.2MHz Quad Op Amp | Texas Instruments

Texas Instruments LM2902MX/NOPB is a low-power, internally frequency-compensated, quad operational amplifier designed for single-supply operation across a wide voltage range. The device provides four amplifier channels in a 14-pin SOIC package, with a 1.2 MHz gain-bandwidth product, 2 mV typical input offset voltage, and approximately 0.5 V/us slew rate. Its high-voltage operating capability makes it useful in industrial control, instrumentation, sensor conditioning, audio, and power-supply feedback circuits. The LM2902MX/NOPB is identified as a standard general-purpose amplifier, while the LM2902 family is also described as a quad, 26 V operational amplifier with 1.2 MHz bandwidth. An operational amplifier is an analog signal-conditioning integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The LM2902 contains four independent amplifier sections with internal frequency compensation, allowing stable operation in common noninverting, inverting, summing, comparator, and feedback configurations. Its low-power design is intended for battery-powered and general-purpose systems where a wide supply-voltage range is more valuable than high-speed performance. Key features include a 3 V to 32 V single-supply operating range, a 26 V maximum total supply voltage, 1.2 MHz gain-bandwidth product, 2 mV typical input offset voltage, and approximately 0.5 V/us slew rate. The four-channel architecture reduces component count and board area when multiple analog signals require conditioning. The 14-pin SOIC package is also available in related LM2902 order variants, making footprint planning important when selecting an exact replacement. The LM2902 family uses a bipolar voltage-feedback architecture. Internal compensation removes the need for an external frequency-compensation capacitor in typical closed-loop configurations. The device can operate from a single positive supply or from split positive and negative supplies. Its relatively modest bandwidth makes it appropriate for slower control and measurement loops rather than high-speed video, RF, or precision signal-chain applications. Typical uses include transducer and sensor conditioning, low-frequency active filters, current-loop and voltage-feedback control, audio preamplification, battery-powered instrumentation, and general analog signal processing. The wide supply range also permits operation from industrial 24 V systems when the total supply voltage remains within the device rating. Designers should account for input common-mode range, output swing, input bias current, and stable feedback-network selection when using the amplifier near its voltage limits. A key design consideration is the relationship between supply voltage, input range, and output swing. A nominal 3 V minimum supply does not mean the input and output can reach every rail voltage, so the signal amplitudes must remain inside the amplifier's specified common-mode and output ranges. Decoupling capacitors should be placed close to the supply pins, and feedback resistors should be selected to keep closed-loop gain and noise performance appropriate for the application. This product page combines the manufacturer's LM2902 product information, distributor references, package identification, and practical guidance for signal conditioning, supply bypassing, common-mode limits, and replacement planning.

RFQ İletişim
LM2902N - Quad 26V 1MHz Op Amp | Texas Instruments
LM2902N

LM2902N - Quad 26V 1MHz Op Amp | Texas Instruments

The Texas Instruments LM2902N is a quad, general-purpose operational amplifier in a 14-pin DIP package, with four independent amplifiers per device. The verified source data identifies it as a 26 V maximum supply part with 1 MHz gain-bandwidth behavior, making it suitable for low-cost signal conditioning, instrumentation, and control circuits. The LM2902N combines independent high-gain stages with internally compensated operation from a single supply, while the DIP package supports through-hole assembly and conventional prototype or repair workflows. An operational amplifier is an analog integrated circuit that uses differential input and feedback to control an output voltage. In the broader electronics hierarchy, an op amp belongs to the amplifier-IC family, performs closed-loop signal amplification, and commonly supports filtering, buffering, level shifting, sensing, and control applications. A quad package provides four amplifiers in one IC, reducing component count while preserving separate signal paths where independent channels are useful. The verified product information specifically describes the LM2902-N as a quad 26 V, 1 MHz operational amplifier. The LM2902 family is associated with wide single-supply operation, internally frequency-compensated amplifiers, and general-purpose analog designs. These characteristics are useful when a board needs four amplifier channels with moderate bandwidth rather than a high-speed precision device. Because the available data does not provide the complete electrical tables, detailed input-bias-current, output-swing, noise, and common-mode specifications must be verified in the manufacturer datasheet before production release. Typical uses include sensor conditioning, low-frequency active filters, industrial control loops, audio preamplifier stages, and general-purpose analog signal paths. The 14-pin DIP outline is appropriate when the design uses a through-hole footprint or a manually assembled educational or industrial prototype. Designers should confirm the exact pinout, supply limits, common-mode range, output drive, and stability requirements for the intended operating point rather than relying only on the family-level description. A key design consideration is decoupling: place the supply bypass capacitor close to the device power pins and provide a stable, low-impedance return path. Input and feedback components should be arranged to minimize parasitic pickup and unwanted oscillation. This page distinguishes verified LM2902-N facts from unspecified parameters, making it a practical starting point for procurement and engineering review. The LM2902N combines four channels, a 26 V supply class, and a 1 MHz operating-speed class in a through-hole 14-pin DIP. This combination supports cost-sensitive analog designs where external compensation, rail-to-rail operation, or high bandwidth is not required.

RFQ İletişim
LM2902N-MAND - 26V 1MHz Quad Op Amp | Texas Instruments
LM2902N-MAND

LM2902N-MAND - 26V 1MHz Quad Op Amp | Texas Instruments

Texas Instruments LM2902N-MAND is a four-amplifier operational-amplifier IC designed for general-purpose analog signal conditioning. The LM2902 family is specified for operation from a single 3 V to 26 V supply, with a 1 MHz gain-bandwidth product, and is offered in a 14-pin through-hole dual in-line package. Each of the four amplifiers is independently frequency compensated and can operate from single-supply or split-supply configurations. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The quad operational amplifier belongs to the broader hierarchy of operational amplifier, analog amplifier, analog signal-processing IC, and semiconductor. Its four independent channels make one package practical for buffering, amplification, active filtering, comparators, instrumentation stages, and control loops that require several similar analog functions. The principal family-level characteristics are a 26 V maximum supply rating, 1 MHz unity-gain bandwidth, four amplifier circuits, and a 14-pin PDIP package. Push-pull output capability supports output swing above the negative supply rail under suitable load conditions. These characteristics are especially useful in industrial equipment where a higher supply rating and low-cost general-purpose amplification can simplify the power architecture. Each amplifier uses internal frequency compensation, eliminating the need for an external compensation network in typical closed-loop configurations. The same basic amplifier can be used as a non-inverting stage with high input impedance, an inverting stage with a defined gain, or a voltage follower for buffering. With a 1 MHz gain-bandwidth product, practical closed-loop bandwidth depends on the selected noise gain, while stability and output behavior must be evaluated with the actual load and supply conditions. Typical uses include sensor interfaces, transducer signal conditioning, active analog filters, industrial controls, audio preamplification, feedback networks, and general signal conditioning. The wide supply range permits operation from industrial 24 V systems when the total supply remains within the 26 V rating, while lower-supply operation supports lower-energy systems. Four channels can reduce package count when the circuit contains multiple independent analog paths. Designers should verify the exact suffix-specific ordering information, operating-temperature grade, and pin marking before production release. Decoupling capacitors should be placed close to the supply pins, signal traces should avoid nearby switching nodes, and unused amplifier channels should be configured according to the manufacturer guidance rather than left floating. Input and output voltage, current, stability, and common-mode limits must be checked at the intended supply voltage. This product page combines the manufacturer product identity, verified distributor information, package-level details, drop-in sourcing options, and application guidance. It also highlights the practical trade-offs between the family-level LM2902N and other quad operational amplifiers, helping engineers evaluate PCB reuse, supply-voltage tolerance, bandwidth, sourcing, and functional fit before finalizing a bill of materials.

RFQ İletişim
LM2902N/NOPB - Quad 26V 1MHz Op Amp | Texas Instruments
LM2902N/NOPB

LM2902N/NOPB - Quad 26V 1MHz Op Amp | Texas Instruments

Texas Instruments LM2902N/NOPB is a quad general-purpose operational amplifier rated for a 3 V to 26 V supply range, with four independent amplifiers and a 1 MHz unity-gain bandwidth. The device is offered in a 14-pin PDIP package and is specified for operation from -40 °C to 85 °C. Its four amplifiers are internally frequency compensated, allowing straightforward implementation of amplifier, comparator, buffer, and feedback-control circuits. An operational amplifier is an analog signal-conditioning IC that uses high open-loop gain and negative feedback to amplify voltage differences. The quad-amplifier configuration places four independent operational amplifiers in one package, reducing component count and board area where multiple analog channels are required. Within the power-management hierarchy, an LM2902N/NOPB belongs to the linear integrated-circuit family, while functionally it serves as an analog signal-processing IC for instrumentation, control, and interface circuits. Key characteristics include four independent channels, a 26 V maximum supply rating, 1 MHz gain-bandwidth performance, and approximately 0.5 V/µs slew rate. The internally compensated architecture avoids external frequency-compensation components in ordinary closed-loop applications. Input and output arrangements follow the conventional dual-inline operational-amplifier pinout, allowing each channel to be used independently as long as the unused amplifier is configured safely. The wide single-supply operating range allows the device to operate from industrial and automotive-related 12 V rails, provided the supply remains within the 26 V rating. Its 1 MHz bandwidth is appropriate for low-frequency control loops, transducers, analog interfaces, and general-purpose signal conditioning rather than high-speed video or communications channels. The PDIP package also supports through-hole assembly and hand prototyping. Typical applications include four-channel sensor amplification, industrial process-control loops, bridge-signal conditioning, audio preamplification, active filtering, and general analog computation. Each channel can also serve as a comparator when configured with suitable positive feedback, although the output-stage behavior and saturation recovery should be evaluated for the target circuit. When laying out a board, place the device away from switching nodes and high-current return paths, provide a local supply bypass capacitor close to the power pin, and route high-impedance input traces away from output and clock signals. Check input and output common-mode limits, output-current demand, thermal dissipation, and supply stability against the manufacturer datasheet before releasing the design. This product page combines the exact orderable part information with practical package, application, replacement, and circuit-layout guidance. It also distinguishes the 14-pin PDIP target from surface-mount family members so engineers can avoid selecting a mechanically incompatible substitute.

RFQ İletişim
LM2902N/PB - Quad 26V 1MHz Op Amp | Texas Instruments (Lead-Free (Pb-Free))
LM2902N/PB

LM2902N/PB - Quad 26V 1MHz Op Amp | Texas Instruments (Lead-Free (Pb-Free))

The Texas Instruments LM2902N/PB is a quad, general-purpose operational amplifier in a 14-pin DIP package, with four independent amplifiers per device. The verified source data identifies it as a 26 V maximum supply part with 1 MHz gain-bandwidth behavior, making it suitable for low-cost signal conditioning, instrumentation, and control circuits. The LM2902N/PB combines independent high-gain stages with internally compensated operation from a single supply, while the DIP package supports through-hole assembly and conventional prototype or repair workflows. An operational amplifier is an analog integrated circuit that uses differential input and feedback to control an output voltage. In the broader electronics hierarchy, an op amp belongs to the amplifier-IC family, performs closed-loop signal amplification, and commonly supports filtering, buffering, level shifting, sensing, and control applications. A quad package provides four amplifiers in one IC, reducing component count while preserving separate signal paths where independent channels are useful. The verified product information specifically describes the LM2902-N as a quad 26 V, 1 MHz operational amplifier. The LM2902 family is associated with wide single-supply operation, internally frequency-compensated amplifiers, and general-purpose analog designs. These characteristics are useful when a board needs four amplifier channels with moderate bandwidth rather than a high-speed precision device. Because the available data does not provide the complete electrical tables, detailed input-bias-current, output-swing, noise, and common-mode specifications must be verified in the manufacturer datasheet before production release. Typical uses include sensor conditioning, low-frequency active filters, industrial control loops, audio preamplifier stages, and general-purpose analog signal paths. The 14-pin DIP outline is appropriate when the design uses a through-hole footprint or a manually assembled educational or industrial prototype. Designers should confirm the exact pinout, supply limits, common-mode range, output drive, and stability requirements for the intended operating point rather than relying only on the family-level description. A key design consideration is decoupling: place the supply bypass capacitor close to the device power pins and provide a stable, low-impedance return path. Input and feedback components should be arranged to minimize parasitic pickup and unwanted oscillation. This page distinguishes verified LM2902-N facts from unspecified parameters, making it a practical starting point for procurement and engineering review. The LM2902N/PB combines four channels, a 26 V supply class, and a 1 MHz operating-speed class in a through-hole 14-pin DIP. This combination supports cost-sensitive analog designs where external compensation, rail-to-rail operation, or high bandwidth is not required.

RFQ İletişim
LM2902NG - 4-Channel 1MHz Op Amp in 14-PDIP | onsemi
LM2902NG

LM2902NG - 4-Channel 1MHz Op Amp in 14-PDIP | onsemi

onsemi LM2902NG is a four-channel, general-purpose operational amplifier in a 14-pin PDIP package. The device provides true differential inputs, a 1 MHz gain-bandwidth product, approximately 40 mA output current, 50 dB minimum common-mode rejection, and a typical input offset voltage of 7 mV. Its four amplifiers are designed for instrumentation, buffering, signal conditioning, and general analog signal-processing systems operating from a single supply. An operational amplifier, or op amp, is a high-gain differential-input amplifier that uses negative feedback to control gain and improve linearity. In the product hierarchy, the LM2902NG belongs to the general-purpose operational-amplifier class, within analog amplifier ICs and integrated circuits. Unlike rail-to-rail precision amplifiers, this device is intended primarily for conventional supply rails where adequate input and output common-mode ranges are available. The four integrated channels make the LM2902NG useful where several independent low-frequency analog functions are required. Its 1 MHz bandwidth supports general-purpose gain and signal conditioning above DC, while true differential inputs suit instrumentation and feedback networks. The 7 mV typical input offset and 50 dB minimum CMRR should be considered when precision requirements are moderate rather than stringent. Each amplifier includes the internal characteristics expected of a practical general-purpose quad op amp, including differential input support, output drive capability, and operation from a single power supply. The 14-pin PDIP format facilitates inspection, prototyping, and through-hole assembly. Designers requiring a surface-mount implementation should select a compatible alternative package rather than attempting to mount the PDIP directly. Typical applications include sensor-signal conditioning, low-level signal buffering, active filtering, transducer-interface circuits, test equipment, industrial control systems, and educational instrumentation. The four-channel organization can reduce component count and simplify board allocation when an analog subsystem needs two or more gain stages. Design with the supply voltage, common-mode input range, output swing, and output-current limits defined by the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and input, feedback, and output routing should avoid long traces susceptible to noise pickup. This product page combines manufacturer and distributor technical details, package guidance, application analysis, replacement criteria, and PCB-oriented design notes. It is intended to help engineers identify whether the LM2902NG's four-channel architecture and 14-PDIP footprint fit a single-supply analog design before committing to a BOM.

RFQ İletişim
LM2902NS - Quad 26V 1.2MHz Op Amp | Texas Instruments
LM2902NS

LM2902NS - Quad 26V 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM2902NS is a general-purpose quad operational amplifier integrating four independent amplifier circuits in a 14-pin SOIC package. The device is designed for a 26 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and an input offset voltage of 2 mV. Its four-amplifier configuration allows one device to implement multiple signal-conditioning, comparison, filtering, or control functions while conserving board area. An operational amplifier is a high-gain, internally compensated differential-input amplifier used to amplify voltage differences, buffer signals, compare thresholds, and drive feedback networks. The LM2902NS belongs to the operational-amplifier hierarchy, where it is also classified as a general-purpose amplifier, analog amplifier, and linear integrated circuit. Its integrated quad arrangement makes it suitable when four similar amplifier channels are required rather than four separate single or dual packages. The four internal circuits provide the principal functional advantage of the LM2902NS. A single package can support four independent signal paths, reducing component count and simplifying PCB layout when the same amplifier type is used throughout a subsystem. The 26 V supply rating provides headroom for industrial and automotive-style control environments, while the 1.2 MHz bandwidth supports applications from DC precision amplification to moderate-frequency signal processing. Texas Instruments identifies the LM2902NS as a standard general-purpose amplifier with four circuits in a 14-SO package. Its 2 mV maximum input offset voltage is relevant when the application compares small sensor voltages against references or develops low-level control signals. Because the four amplifiers are independent, their input and output pins can support separate analog channels rather than requiring a common signal path. Typical uses include four-channel sensor conditioning, precision threshold comparison, current-loop signal conditioning, industrial process-control interfaces, buffered instrumentation, and general embedded analog signal processing. In each case, the integrated quad topology reduces the number of amplifiers needed while retaining independent channel routing and common package-level supply handling. PCB design should preserve analog signal integrity by keeping input and output routing short, decoupling the supply pins close to the device, and avoiding current injection beneath the package. Confirm input common-mode range, output swing, supply limits, stability requirements, and channel-specific bandwidth needs against the manufacturer datasheet before finalizing the circuit. This page combines the Texas Instruments product description, exact-order MPN information, package details, verified source listings, and practical selection guidance. It also distinguishes same-package replacement candidates from broader functional alternatives so engineers can assess footprint compatibility, bandwidth, offset voltage, and supply capability before changing an approved BOM.

RFQ İletişim
LM2902NS-MAND - Quad 26 V 1 MHz Op Amp | Texas Instruments
LM2902NS-MAND

LM2902NS-MAND - Quad 26 V 1 MHz Op Amp | Texas Instruments

The Texas Instruments LM2902NS-MAND is a general-purpose quad operational amplifier with four amplifier circuits in a 14-pin SO package. The LM2902-N family operates from a single supply up to 26 V, delivers a gain-bandwidth product of 1 MHz, and is designed for general-purpose signal conditioning across industrial, automotive, and embedded applications. Its four independent channels allow multiple analog signals to be amplified within one compact package. An operational amplifier, commonly called an op amp, is a high-gain analog building block used in voltage amplification, filtering, buffering, comparison, and feedback-control circuits. The LM2902 belongs to the voltage-feedback operational-amplifier family, within the broader linear and power-management semiconductor hierarchy. Its integrated amplifier circuits depend on stable supply rails and carefully selected external feedback components. The headline features of the LM2902NS-MAND are its four-circuit configuration, 26 V maximum supply rating, and 1 MHz gain-bandwidth product. The integrated quad arrangement reduces the number of packages and PCB connections required when several low-frequency analog functions must be implemented. The 14-pin SO package also supports conventional surface-mount assembly methods used in high-volume electronic assemblies. The LM2902-N family provides practical performance for general-purpose analog designs rather than specialized low-noise or high-speed operation. A 1 MHz gain-bandwidth product is appropriate for audio-frequency signal paths, sensor conditioning, error amplifiers, and control loops that do not require the bandwidth of modern rail-to-rail precision amplifiers. Its 26 V supply capability also allows operation from higher-voltage rails than conventional 5 V or 3.3 V analog systems. Typical uses include four-channel sensor interfaces, buffered instrumentation inputs, industrial control signals, automotive electronics, audio preamplification, and general feedback-control blocks. In a typical circuit, each channel uses external resistors or capacitors to define gain, filtering, or integration behavior. Power-supply bypassing remains important because every amplifier channel shares the same package and supply pins. For new layouts, check the complete pin-description and recommended operating tables in the manufacturer datasheet before assigning connections. Keep input and output traces away from switching nodes, provide local supply bypassing, and verify common-mode, output-swing, and stability limits across the intended supply range. The quad package is especially useful when matched channel count and board area matter more than precision or rail-to-rail operation. This product overview combines the device architecture with practical application guidance, package information, sourcing details, and a comparison of documented drop-in alternatives. It also identifies where engineers must review the exact orderable suffix, supply conditions, and channel-level electrical limits before releasing a production design.

RFQ İletişim
LM2902NSR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902NSR

LM2902NSR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)

Texas Instruments LM2902NSR is a general-purpose quad operational amplifier integrating four independent amplifier circuits in a 14-pin SOIC package. The device is designed for a 26 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and an input offset voltage of 2 mV. Its four-amplifier configuration allows one device to implement multiple signal-conditioning, comparison, filtering, or control functions while conserving board area. An operational amplifier is a high-gain, internally compensated differential-input amplifier used to amplify voltage differences, buffer signals, compare thresholds, and drive feedback networks. The LM2902NSR belongs to the operational-amplifier hierarchy, where it is also classified as a general-purpose amplifier, analog amplifier, and linear integrated circuit. Its integrated quad arrangement makes it suitable when four similar amplifier channels are required rather than four separate single or dual packages. The four internal circuits provide the principal functional advantage of the LM2902NSR. A single package can support four independent signal paths, reducing component count and simplifying PCB layout when the same amplifier type is used throughout a subsystem. The 26 V supply rating provides headroom for industrial and automotive-style control environments, while the 1.2 MHz bandwidth supports applications from DC precision amplification to moderate-frequency signal processing. Texas Instruments identifies the LM2902NSR as a standard general-purpose amplifier with four circuits in a 14-SO package. Its 2 mV maximum input offset voltage is relevant when the application compares small sensor voltages against references or develops low-level control signals. Because the four amplifiers are independent, their input and output pins can support separate analog channels rather than requiring a common signal path. Typical uses include four-channel sensor conditioning, precision threshold comparison, current-loop signal conditioning, industrial process-control interfaces, buffered instrumentation, and general embedded analog signal processing. In each case, the integrated quad topology reduces the number of amplifiers needed while retaining independent channel routing and common package-level supply handling. PCB design should preserve analog signal integrity by keeping input and output routing short, decoupling the supply pins close to the device, and avoiding current injection beneath the package. Confirm input common-mode range, output swing, supply limits, stability requirements, and channel-specific bandwidth needs against the manufacturer datasheet before finalizing the circuit. This page combines the Texas Instruments product description, exact-order MPN information, package details, verified source listings, and practical selection guidance. It also distinguishes same-package replacement candidates from broader functional alternatives so engineers can assess footprint compatibility, bandwidth, offset voltage, and supply capability before changing an approved BOM.

RFQ İletişim
LM2902PW - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments
LM2902PW

LM2902PW - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments

The Texas Instruments LM2902PW is a quadruple general-purpose operational amplifier with a 26 V supply rating, 1.2 MHz gain-bandwidth product, and 2 mV maximum input offset voltage, housed in a 14-pin TSSOP (PW) package rated from -40C to +125C. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, the most widely used building block in analog electronics. Within the power-management and signal-chain hierarchy, the quad op amp consolidates four amplifiers in one IC, reducing board area, BOM count, and matched-channel drift. The LM2902 family belongs to the industry-standard LM324/LM2902 lineage of single-supply op amps whose common-mode input range includes ground, allowing direct sensing of signals near 0 V. Key features include a wide supply range (single supply or dual supplies up to +/-13 V for LM324 variants, 26 V total for LM2902), low supply-current drain of approximately 0.8 mA per amplifier that is largely independent of supply voltage, and ground-sensing common-mode input. According to TI, the newer LM2902B version is a drop-in replacement for all versions of LM224, LM324, and LM2902, with improved offset (3 mV for the B version) and a supply range extended to 36 V on B and BA versions. Architecturally, the LM2902 uses internally compensated bipolar circuitry with class-AB output stages that swing to within a few hundred millivolts of the negative rail, supporting outputs near ground without an external negative supply. The 1.2 MHz bandwidth and 0.4 V/us-class slew rate suit low-frequency conditioning, filtering, and comparison tasks rather than high-speed signal chains. Typical applications include industrial sensor signal conditioning (transimpedance and non-inverting amplifiers), automotive sensing front-ends benefiting from the -40C to +125C rating, active filter networks, and battery-powered instrumentation where four matched channels and low quiescent current matter. Design consideration: keep output loading light and allow headroom near the rails - output swing approaches but does not reach the positive supply, so clamp circuit expectations accordingly and verify offset-induced error in high-gain stages. This page adds value beyond the manufacturer datasheet by combining distributor cross-references, drop-in replacement options, application guidance, and procurement FAQs in one place.

RFQ İletişim
LM2902PWR - Quad 36V 1.2MHz Op Amp | Texas Instruments
LM2902PWR

LM2902PWR - Quad 36V 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM2902PWR is a quad general-purpose operational amplifier designed for single-supply or split-supply operation, with four high-voltage amplifiers in a 14-pin TSSOP package. Its headline characteristics include a 26 V nominal supply range, 1.2 MHz gain-bandwidth product, and approximately 2 mV input offset voltage. An operational amplifier is an analog signal-processing IC that uses differential feedback to amplify the difference between its inverting and non-inverting inputs. The LM2902 belongs to the hierarchy of operational amplifier, analog amplifier, analog signal IC, and semiconductor. Four independent channels in one package simplify designs requiring several amplifiers, while reducing the number of PCB components compared with four single-amplifier packages. The LM2902 provides four independent, internally compensated amplifiers with a common-mode input range that can extend to ground. This is useful in battery-powered and single-supply circuits where signals may remain near the lower supply rail. Its 1.2 MHz gain-bandwidth product supports general-purpose signal conditioning, including audio-frequency amplification, buffering, comparison functions, active filters, and sensor-interface stages. The wide supply capability distinguishes the LM2902 from low-voltage rail-to-rail amplifiers commonly used in compact battery-powered electronics. A nominal 26 V operating range and operation up to 36 V allow the same device family to address industrial control, instrumentation, and power-supply support circuits where higher-voltage signals and supplies may be present. The device is not intended to replace precision or rail-to-rail input amplifiers when sub-millivolt accuracy is required. Typical uses include four-channel audio preamplification, low-frequency active filters, transducer conditioning, current-loop interfaces, and general instrumentation. Because each amplifier is independent, the four channels can also perform different functions on one board. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer’s recommended stable-input arrangement. For a 14-TSSOP implementation, verify the complete pin map and thermal pad treatment against the manufacturer datasheet before layout release. The principal design trade-off is the combination of high-voltage tolerance and unity-gain stability versus the lower bandwidth, higher offset, and lack of rail-to-rail operation associated with this classic general-purpose amplifier architecture. This page combines the key operating characteristics, package information, sourcing guidance, drop-in alternatives, and practical circuit considerations needed to evaluate the LM2902PWR in industrial, instrumentation, audio, and embedded analog designs.

RFQ İletişim
LM2902PWRE4 - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments
LM2902PWRE4

LM2902PWRE4 - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments

The Texas Instruments LM2902PWRE4 is a quad general-purpose operational amplifier with four independent high-voltage (26V) amplifier circuits, a 1.2 MHz gain-bandwidth product, and a 2 mV (typical) input offset voltage, housed in a 14-pin TSSOP (PW) surface-mount package delivered in tape and reel. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. Within the signal-chain hierarchy, it belongs to the amplifier IC family, sitting above discrete transistor stages and below application-specific instrumentation amplifiers. Quad op amps such as the LM2902 integrate four channels in one package, saving board space and matching thermal drift across channels in multi-channel analog circuits. Key features of the LM2902PWRE4 include a wide supply range (single supply 3V to 26V, or dual supplies up to +/-13V per distributor listing data), low supply current per amplifier, input common-mode range that includes ground (ground-sense operation), and output voltage swing that approaches the negative rail. These characteristics make the family the industry workhorse for single-supply analog front ends. The E4 suffix denotes TI's lead-free, RoHS-compliant tape-and-reel packing of the PW package. Architecturally, the LM2902 uses a classic bipolar input stage with PNP input transistors that allow input voltages down to the negative rail, which is essential in single-supply designs near 0V. Per TI, the next-generation LM2902B and LM324B versions are drop-in replacements for all versions of the LM224, LM324, and LM2902, with improved specifications such as a 3V to 36V supply range and reduced offset on B/BA versions. Typical applications include transducer amplification, active filters, comparators and multi-stage signal conditioning in automotive and industrial systems, battery-powered instruments, and DC gain blocks. Design consideration: the LM2902 is not rail-to-rail at the output or unity-gain stable at high capacitive loads - verify phase margin and output swing headroom in low-voltage designs. This page synthesizes distributor listings, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments
LM2902PWRG3

LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM2902PWRG3 is a quadruple general-purpose operational amplifier with four independent amplifiers, 26 V maximum supply capability, 1.2 MHz gain-bandwidth product, and 2 mV input-offset voltage. Each channel is frequency compensated and designed for single-supply or split-supply operation, making the device suitable for general analog signal conditioning, industrial control, and instrumentation. The component is packaged in a 14-pin TSSOP (PW) package supplied in tape-and-reel format. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. A quad operational amplifier combines four amplifiers in one package, allowing a design to process four signals while reducing board area and package count. The LM2902 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors, and its wide supply range makes it useful in industrial systems operating above conventional low-voltage analog rails. The four channels operate from a single supply or from split supplies, allowing different system reference arrangements. Key characteristics include a 1.2 MHz gain-bandwidth product, a 0.5 V/µs slew rate, and a typical supply-current drain of 0.8 mA per amplifier. The input-offset voltage is specified at 2 mV, while the maximum operating supply voltage is 26 V. These characteristics support moderate-bandwidth signal conditioning rather than high-speed precision applications. The LM2902 architecture provides internally frequency-compensated amplifiers, simplifying closed-loop use without an external compensation network. Each amplifier can operate as an inverter, non-inverting gain stage, comparator, buffer, or active filter element when operated within its common-mode and output-swing limits. The 14-lead TSSOP package provides a compact surface-mount format, but its narrow lead pitch requires careful PCB routing and adequate copper area for reliable assembly. Typical uses include industrial sensor interfaces, low-frequency active filters, control-loop error amplifiers, transducer signal conditioning, and four-channel instrumentation systems. Split-supply operation is useful when signals remain bipolar around ground, while single-supply operation fits battery-powered or process-control systems where a mid-supply reference can establish the signal center point. For reliable operation, verify the input common-mode range, output swing, supply current, and channel stability at the intended temperature before finalizing the PCB. Place bypass capacitors close to the supply pins, keep feedback components compact, and avoid routing sensitive input traces beside switching nodes or high-current output paths. This product page combines the manufacturer device specifications with application-focused design guidance, package information, and same-family replacement analysis to support component selection, PCB planning, and sourcing decisions.

RFQ İletişim
LM2902PWRG4 - Quad 26V 1.2MHz Op Amp | Texas Instruments
LM2902PWRG4

LM2902PWRG4 - Quad 26V 1.2MHz Op Amp | Texas Instruments

The Texas Instruments LM2902PWRG4 is a standard general-purpose quadruple operational amplifier integrated circuit with four independent amplifiers, a 26 V maximum supply rating, 1.2 MHz gain-bandwidth product, and a 14-pin TSSOP package. It is designed for general-purpose signal conditioning, buffering, amplification, and analog control applications where a cost-effective, multi-amplifier device is required. An operational amplifier is an amplifier IC that uses very high open-loop gain to amplify small differential signals while rejecting common-mode noise and voltage variation. The LM2902 family belongs to the amplifier IC hierarchy, where a quad operational amplifier combines four amplifiers in one package for applications needing several gain stages or multiple independent signal paths. The integrated quad arrangement reduces board area and simplifies system partitioning compared with four separate single or dual amplifier packages. The device is identified as a 4-circuit, 1.2 MHz operational amplifier in a 14-TSSOP package. The LM2902 family is specified for operation from single or dual supplies, with the LM2902 supply rating listed as 26 V. The manufacturer describes the family as an industry-standard, general-purpose platform, and its product information identifies low offset voltage and common-mode input range extending to ground. These characteristics make the device suitable for DC and low-frequency signal paths that do not require the low-noise performance of a precision amplifier. The LM2902 can be used in sensor-interface conditioning, current-voltage conversion, audio and communication signal amplification, active filtering, comparator-style thresholding, and general industrial control. Each amplifier operates independently, allowing four different signal chains to share one package. The wide supply-voltage capability is useful when the signal source operates from a higher rail than the system logic, while the common-mode input range including ground supports sensor interfaces whose signals remain near 0 V. The primary design consideration is supply bypassing and input/output stability. Place the required bypass capacitor close to the supply pins and route high-current return paths carefully to minimize ground displacement. Inputs must remain within the specified common-mode and absolute-maximum limits. Because the LM2902 is a general-purpose amplifier rather than a precision part, offset, bias current, output swing, noise, and slew-rate requirements should be checked against the actual signal chain before precision measurements are attempted. Use the manufacturer datasheet pin-description table and recommended application circuit when assigning PCB tracks. This page provides a practical engineering overview of the LM2902PWRG4, including package identification, functional context, application guidance, verified alternatives, and design considerations for selecting and integrating a quad high-voltage general-purpose operational amplifier.

RFQ İletişim
LM2902Q4T - 1.3 MHz Quad Op Amp | STMicroelectronics
LM2902Q4T

LM2902Q4T - 1.3 MHz Quad Op Amp | STMicroelectronics

STMicroelectronics LM2902Q4T is a low-power quad operational amplifier with four general-purpose amplifier circuits, a 1.3 MHz gain-bandwidth product, and a 3 V to 30 V supply-voltage range. The device supports operation from single or dual supplies, uses push-pull outputs, and is housed in a 16-QFN package with an exposed pad. An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. A quad op amp combines four amplifiers in one package, allowing a PCB to implement multiple signal-conditioning, comparison, filtering, or buffering functions while reducing package count. This device belongs to the operational-amplifier hierarchy within linear and analog integrated circuits. Key specifications include a gain-bandwidth product of 1.3 MHz, slew rate of 0.4 V/µs, large-signal voltage gain of 100 dB, and supply current of 375 µA per amplifier. Its input common-mode voltage range includes the negative supply rail, making it useful in single-supply circuits where signals approach ground. The 3 V to 30 V operating range also supports conventional industrial supply levels. The LM2902Q4T uses a bipolar operational-amplifier architecture designed for general-purpose precision and control applications. Each amplifier has two inputs, an output, and power connections shared with the other three channels. The 100 dB open-loop gain supports closed-loop gains from unity through inverting or non-inverting configurations, while the 1.3 MHz bandwidth limits the frequency range of high-gain stages. Typical uses include low-frequency sensor conditioning, transducer amplification, active filtering, analog signal buffering, power-supply feedback loops, and general instrumentation. In a 3 V single-supply system, the common-mode input range extending to the negative rail helps preserve signal integrity near ground. In dual-supply systems, the 30 V maximum supply supports ±15 V rails. PCB design should prioritize short feedback paths, short output routing, and stable return connections. Place input and feedback components close to the associated amplifier pins, use a common ground plane, and connect the exposed pad to a low-impedance thermal and ground plane according to the package land pattern. Decoupling capacitors should be positioned near the power pins. This product resource combines electrical characteristics, package details, application guidance, design notes, and cross-reference information. The comparisons also distinguish the quad op amp from nearby comparator and alternate-package LM2902-family devices, helping engineers verify footprint, function, and electrical requirements before assigning a replacement.

RFQ İletişim
LM2902QDRG4Q1 - Quad 1.2MHz Op Amp | Texas Instruments
LM2902QDRG4Q1

LM2902QDRG4Q1 - Quad 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM2902QDRG4Q1 is a general-purpose, four-circuit operational amplifier with a 1.2 MHz gain-bandwidth product, 0.5 V/µs slew rate, and operation from a single 5 V supply in a 14-pin SOIC package. The four amplifiers are designed for general-purpose signal conditioning and support split-supply operation when the total supply span is appropriate. An operational amplifier is a voltage-controlled, high-gain analog building block used to amplify, buffer, compare, or sum signals. The LM2902 belongs to the broader operational-amplifier family within analog and amplifier ICs. Its four independent channels let one package provide several conditioning functions while conserving board area and simplifying power distribution in industrial, automotive, and control systems. Key operating characteristics include four amplifier circuits, a 1.2 MHz gain-bandwidth product, a 0.5 V/µs slew rate, and an operating-temperature range from -40 °C to 125 °C. The automotive-qualified variant is identified as AEC-Q100 compliant in the product listing. Typical common-mode rejection is listed at 80 dB, while input-bias current is listed at -0.5 µA for the cited conditions. The device uses conventional internally compensated operational-amplifier architecture. Its gain-bandwidth product determines the approximate small-signal bandwidth at a given closed-loop gain, while slew rate limits how quickly the output can follow a large voltage step. For low-frequency precision, sensing, or conditioning functions, the relatively wide common-mode-rejection specification helps reduce output offset caused by common-mode input variation. Typical uses include industrial sensor conditioning, actuator and control-loop signal processing, automotive interface circuits, buffered analog measurement paths, and general low-frequency amplifier stages. Each channel can implement a noninverting or inverting amplifier, voltage follower, comparator-style interface, or summing function when operated within its electrical limits. A key design consideration is supply and output-range verification. Single-supply operation is specified from a 5 V supply in the cited product information, and applications using lower or higher rails must be checked against the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, with care taken to maintain stability in capacitive-feedback networks. This product record combines package, electrical, environmental, and automotive attributes with verified substitute references, application guidance, and a parameter-by-parameter comparison. It is intended to accelerate component selection and PCB planning for engineers evaluating a genuine 14-SOIC quad operational amplifier.

RFQ İletişim
LM2902QDRQ1 - 26V Automotive Quad Op Amp | Texas Instruments
LM2902QDRQ1

LM2902QDRQ1 - 26V Automotive Quad Op Amp | Texas Instruments

Texas Instruments LM2902QDRQ1 is an automotive-grade, quad operational amplifier rated for a 26 V maximum supply voltage, 1.2 MHz gain-bandwidth product, and 2 mV input offset voltage. The four amplifiers are independent, and the device is packaged in a 14-pin SOIC (D) package for operation from -40°C to 125°C. Its 60 mA output-current capability per channel supports a broad range of industrial and automotive signal-conditioning circuits. An operational amplifier is a high-gain, frequency-compensated analog IC that amplifies the difference between two input voltages. Quad operational amplifiers combine four amplifiers in one package, providing a compact solution for multiple signal channels. Within the broader semiconductor hierarchy, the LM2902-Q1 is a linear integrated circuit and operational amplifier intended for precision control, measurement, buffering, and general-purpose analog signal processing. Key characteristics include four independent amplifier sections, a 26 V maximum supply span, 1.2 MHz gain-bandwidth product, and 2 mV input offset voltage. The wide supply range allows operation from single or split supplies when the total voltage across the amplifier complies with device limits. The automotive-qualified Q1 grade extends the operating-temperature range to -40°C through 125°C for use in demanding vehicle and industrial environments. The internally frequency-compensated architecture simplifies implementation because external compensation components are not required for typical closed-loop gains. Each amplifier can independently handle input, output, and feedback connections, allowing one package to serve several channels of a control or measurement system. Designers should still account for input common-mode range, output swing, noise, stability, and the input bias-current error when selecting feedback and source impedances. Typical uses include 12 V and 24 V automotive sensor interfaces, actuator-driver signal conditioning, transducer amplification, current sensing, voltage comparison, and industrial control modules. The 60 mA output capability is useful for driving moderate loads, while the 1.2 MHz bandwidth is appropriate for low- and intermediate-frequency analog signals rather than high-speed waveform or video applications. The principal design consideration is the 26 V maximum supply rating. Board designers should leave transient margin for automotive and industrial supply variation, route sensitive input signals away from switching nodes, and verify that connected sensors or feedback networks do not exceed the input and output limits. Decoupling capacitors should be placed close to the supply pins, and unused amplifier sections should be configured according to the manufacturer datasheet. This page combines the LM2902-Q1 product specifications, package information, candidate drop-in references, application guidance, and design considerations. It supports faster part selection while directing engineers to the manufacturer product page and datasheet for final qualification, pin assignment, and lifecycle decisions.

RFQ İletişim
LM2902QPWRG4Q1 - 26V Quad Automotive Op Amp | Texas Instruments
LM2902QPWRG4Q1

LM2902QPWRG4Q1 - 26V Quad Automotive Op Amp | Texas Instruments

Texas Instruments LM2902QPWRG4Q1 is an automotive, general-purpose quad operational amplifier with four independent amplifiers, a 1.2 MHz gain-bandwidth product, and 2 mV offset voltage in a 14-pin TSSOP package rated for -40°C to 125°C operation. It supports supply voltages up to 26 V, making it suitable for industrial and automotive signal-conditioning systems. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs. The quad LM2902 configuration places four high-gain, internally frequency-compensated operational amplifiers in one package. In the broader component hierarchy, this device belongs to the operational-amplifier family, analog amplifier ICs, and semiconductor-based signal-conditioning components. Each amplifier can operate independently when its supply and input common-mode requirements are met. The principal features of the LM2902QPWRG4Q1 include four amplifier circuits, 0.5 V/µs slew rate, 80 dB common-mode rejection ratio, and a 1.2 MHz gain-bandwidth product. Its automotive-oriented temperature range of -40°C to 125°C supports operation across demanding vehicle and industrial environments. The 14-TSSOP package also provides a compact surface-mount footprint for four analog channels. Internally, the LM2902-Q1 family uses four independent, high-gain, frequency-compensated operational amplifiers. This architecture allows one package to implement four analog functions without requiring separate amplifier packages. Its 0.5 V/µs slew rate determines how quickly an output can follow a changing input, while the 80 dB CMRR specification quantifies rejection of common-mode voltage applied to both inputs. Typical uses include sensor signal conditioning, transducer amplification, analog summing, active filtering, low-level current-to-voltage conversion, and general instrumentation. Automotive applications can include conditioning signals from resistive sensors, bridge-based sensors, and interface electronics, provided the design observes the supply-voltage and input common-mode limits. The primary design consideration is the relationship between supply voltage, output swing, input common-mode range, and the load connected to each amplifier. Because the LM2902 can operate from single or split supplies, output limits must be checked with the actual rail arrangement. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs must be configured according to the manufacturer recommendations. This page combines the exact LM2902QPWRG4Q1 specifications, source-linked documentation, package information, practical application guidance, and qualified drop-in alternatives. The comparison and design notes focus on engineering decisions that help shorten evaluation, footprint verification, and replacement planning for 14-pin TSSOP quad operational-amplifier designs.

RFQ İletişim
LM2902QPWRQ1 - 26V Quad Op Amp | TI | Automotive
LM2902QPWRQ1

LM2902QPWRQ1 - 26V Quad Op Amp | TI | Automotive

Texas Instruments LM2902QPWRQ1 is an automotive-qualified, quad operational amplifier designed for operation from a single supply or split supplies, with four independent, high-gain, internally frequency-compensated amplifiers in one 14-pin TSSOP package. Its headline ratings are a 26 V maximum supply, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage. An operational amplifier is a voltage-controlled differential amplifier whose high open-loop gain makes it useful for closed-loop signal conditioning. The quad configuration places four independent amplifiers in one package, reducing board area and simplifying power routing. Within the component hierarchy, this device is a quad operational amplifier, a linear amplifier IC, and a member of the broader analog signal-processing and semiconductor families. The LM2902-Q1 family is qualified to AEC-Q100 specifications for automotive use. The LM2902QPWRQ1 ordering option is offered in a 14-pin PW TSSOP package and supports an operating temperature range of -40°C to +125°C. These characteristics make it appropriate for automotive electronics, industrial controls, instrumentation, and other systems that require four general-purpose amplifiers in a compact surface-mount package. Internally, each amplifier combines high gain with frequency compensation, allowing stable closed-loop operation without external compensation in common gain configurations. Because the four amplifiers share a package and supply pins, PCB design must provide a low-impedance connection between the supply pins and decoupling capacitance. Careful grounding and input-signal routing remain essential for preserving signal integrity around the amplifier inputs. Typical applications include sensor-signal conditioning, current-to-voltage conversion, voltage amplification, active filtering, differential sensing, and general feedback-control paths. In an automotive signal-conditioning circuit, the four channels can process separate sensor outputs or implement several stages around one system function, reducing component count while maintaining a common supply architecture. A primary design consideration is verifying input and output common-mode limits against the actual signal range. Supply voltage alone does not establish usable input swing, output swing, or stability. Decoupling capacitors should be placed close to the supply pins, sensitive traces should avoid switching nodes, and unused amplifier channels should be configured according to the manufacturer datasheet rather than left floating. This product page combines the device identity, AEC-Q100 qualification, 14-pin TSSOP packaging, functional guidance, same-family drop-in candidates, and practical implementation notes. Use the Texas Instruments datasheet and pin-description table as the controlling references for final schematic review, footprint verification, component tolerances, and production release.

RFQ İletişim
LM2902QS14-13 - 36V Quad Op Amp | Diodes Incorporated
LM2902QS14-13

LM2902QS14-13 - 36V Quad Op Amp | Diodes Incorporated

The Diodes Incorporated LM2902QS14-13 is a four-channel general-purpose operational amplifier in a 14-pin SOIC package, operating from a single 3 V to 36 V supply. It supports input and output voltages close to the supply rails, provides 20 nA typical input bias current, 700 uA typical quiescent current, and 100 dB open-loop gain. The LM2902QS14-13 is the automotive-compliant version of the classic LM2902 quad operational amplifier family. An operational amplifier, or op amp, is a high-gain analog signal-conditioning semiconductor commonly used in amplifier, comparator, filtering, summing, and feedback-control circuits. The LM2902 architecture combines four independent amplifiers with common positive and negative power pins. Its wide supply-voltage range places it within the voltage-amplifier and analog-signal-processing hierarchy, where it bridges low-level sensor signals and higher-level control or measurement systems. The principal advantages include four amplifiers in one 14-pin package, low 700 uA quiescent current, 20 nA typical input bias current, and 100 dB typical open-loop gain. The 36 V maximum supply rating supports automotive and industrial systems operating above conventional low-voltage logic levels. Input common-mode range and output swing are important because they determine how close the amplifier can operate to its positive or negative supply rail. Consult the manufacturer pin description and electrical characteristics before selecting external bias networks or designing for rail-to-rail behavior. The LM2902 uses a classic general-purpose four-amplifier architecture rather than rail-to-rail input or output stages. Consequently, common-mode and output-voltage limits depend on the selected supply voltage and load. Stable operation in unity-gain configurations should be confirmed against the manufacturer stability and load-capacitance guidance. Decoupling capacitors should be placed close to the supply pins to control supply impedance and maintain predictable transient behavior. Typical uses include automotive sensor interfaces, industrial control modules, battery-powered instrumentation, transducer amplifiers, and low-frequency active filters. The quad configuration reduces board area when four independent analog channels are required, while the high-voltage capability supports systems with a 24 V or 36 V supply architecture. The device can also implement comparators when its output behavior and saturation recovery are acceptable for the intended switching application. For each amplifier, preserve input common-mode operation within the datasheet limits and account for output loading, input bias-current error, and noise bandwidth. Place bypass capacitors close to pins 4 and 11, maintain short feedback paths, and avoid long parallel traces that can increase coupling between channels. Verify motor-generated electrical noise, supply transients, and ground offsets before using the amplifier directly with automotive sensors. This product page combines exact ordering information, electrical limitations, pin assignments, application guidance, and like-for-like alternatives. It also distinguishes the automotive LM2902QS14-13 from lower-voltage, different-package, or non-automotive alternatives, helping engineers determine whether a replacement preserves both the SOIC-14 footprint and the required electrical behavior.

RFQ İletişim
LM2902QT14-13 - 36V Quad Op Amp, 14-TSSOP | Diodes Incorporated
LM2902QT14-13

LM2902QT14-13 - 36V Quad Op Amp, 14-TSSOP | Diodes Incorporated

Diodes Incorporated LM2902QT14-13 is a four-circuit general-purpose operational amplifier designed for operation from a single supply of up to 36 V, with a typical supply current of 700 µA, input bias current of 20 nA, and open-loop gain of 100 dB. The device is supplied in a 14-pin TSSOP package and is identified as automotive compliant in the manufacturer datasheet listing. An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. High-gain feedback structures make the op amp useful for voltage followers, buffers, transimpedance amplifiers, comparators, differential stages, and analog signal conditioning. Within the electronic-component hierarchy, the LM2902 is a quad operational-amplifier IC: four amplifiers share one package while retaining independent input and output stages. The four independent circuits allow a compact design to implement several analog functions without using four separate packages. Key characteristics include a typical unity-gain bandwidth of 1 MHz, 100 dB typical open-loop gain, 20 nA typical input bias current, and 700 µA typical supply current. These values make the device suitable for general-purpose industrial and automotive signal-conditioning circuits where moderate bandwidth and low quiescent consumption are more important than high-speed performance. The LM2902 family uses a high-voltage internal design intended for supply rails approaching 36 V. Its low input bias current reduces the error introduced when the op amp drives high-impedance sensors or resistor networks. The 1 MHz unity-gain bandwidth supports closed-loop operation at substantially lower frequencies, with practical bandwidth determined by amplifier gain, noise, slew rate, and stability requirements. Four amplifier sections also permit independent gain stages within one package. Typical applications include sensor-signal conditioning, 4–20 mA loop receivers, industrial instrumentation, automotive signal conditioning, transducer interfaces, active filters, and low-frequency control systems. The 14-pin TSSOP package helps reduce PCB area, although exposed thermal and decoupling considerations remain important in multi-amplifier designs. For PCB implementation, place the supply bypass capacitor close to the positive and negative supply pins and route each amplifier's feedback components close to its assigned pins. Check output-current limits, input common-mode range, output swing, and the required output-voltage headroom against the specific supply voltage before finalizing the circuit. This page combines the key LM2902QT14-13 characteristics, package information, application guidance, and a qualified comparison framework to help engineers evaluate this 36 V quad operational amplifier for new and existing analog designs.

RFQ İletişim
LM2902S14-13 - Quad General-Purpose Op Amp | Diodes
LM2902S14-13

LM2902S14-13 - Quad General-Purpose Op Amp | Diodes

Diodes Incorporated LM2902S14-13 is a four-circuit, general-purpose operational amplifier in a 14-pin SOIC package. The device combines four amplifiers on one package, providing a practical solution for analog signal conditioning, feedback control, sensing, and interface circuits. Its package supports conventional surface-mount assembly while keeping the quad-amplifier architecture appropriate for moderate-cost, high-volume equipment. An operational amplifier is a voltage-gain device used to amplify differences between two input signals. The quad operational-amplifier category groups four amplifiers into one device, placing it within the broader hierarchy of analog amplifiers, signal-conditioning ICs, and semiconductor components. The LM2902 family is commonly used where multiple independent amplifier channels are required in one compact circuit footprint. The LM2902S14-13 is identified as a standard general-purpose amplifier with four circuits in a 14-SO package. It is suitable for applications such as sensor conditioning, active filtering, audio preamplification, loop-control circuits, and general voltage amplification. The 14-SO package is useful where designers want more integration than discrete single amplifiers while retaining a widely used surface-mount format. Its quad construction can reduce board area by consolidating four amplifier channels into one package. Each channel requires its own external feedback and compensation components determined by the circuit topology. Because the four channels share a package, designers should place input, output, power, and decoupling connections carefully to minimize coupling between high-impedance nodes and noisy output paths. Typical uses include conditioning sensor outputs in industrial equipment, buffering inputs to analog-to-digital converters, implementing active filters in audio and communications equipment, and closing control loops in power or measurement systems. The amplifier architecture is also appropriate for general-purpose educational and prototype boards requiring multiple independently configured channels. The primary design consideration is stable feedback. Each amplifier stage should use negative feedback and include compensation appropriate to the required gain and bandwidth. Input common-mode range, supply voltage, output swing, input offset voltage, and slew rate must be checked against the manufacturer datasheet before use, especially when operating near supply rails or driving capacitive loads. This page organizes the essential LM2902S14-13 package, application, and substitution information into an engineering-focused format. It also provides practical guidance for PCB layout, feedback design, decoupling, and part selection so that designers can assess the quad amplifier for new analog signal-chain designs.

RFQ İletişim
LM2902SNG - Quad General-Purpose Op Amp | onsemi
LM2902SNG

LM2902SNG - Quad General-Purpose Op Amp | onsemi

The onsemi LM2902SNG is a standard general-purpose quad operational amplifier integrated circuit packaged in a 14-pin plastic dual-inline package. The device contains four amplifier sections, allowing multiple analog signal-conditioning functions to be placed in one package. The verified product description identifies the LM2902SNG as a 4-circuit, 14-PDIP instrumentation, operational-amplifier, and buffer-amplifier device. The LM2902 family is commonly used where a low-cost, general-purpose voltage-feedback amplifier is needed for signal conditioning, buffering, summing, amplification, and basic active-filter implementations. An operational amplifier is a voltage-gain building block that compares an input signal with a feedback network and drives its output to reduce the difference between the two inputs. The LM2902SNG combines four such amplifier channels in one package, reducing board area and simplifying designs that require multiple analog functions. The 14-PDIP package is suitable for through-hole PCB assembly, prototyping, educational designs, and industrial or instrumentation equipment where a conventional DIP footprint is preferred. The LM2902SNG is positioned as a standard general-purpose amplifier rather than a precision, low-noise, high-speed, or rail-to-rail amplifier. Design engineers should therefore verify input common-mode range, output swing, supply-voltage limits, input bias current, gain-bandwidth behavior, and output-current capability against the exact electrical characteristics in the manufacturer datasheet before using it in a new design. Its four-channel arrangement can simplify power distribution because several amplifier functions may share the same package and supply rails. Typical uses include sensor-signal conditioning, low-frequency instrumentation, analog signal buffering, voltage-level translation within suitable common-mode limits, summing amplifiers, and general feedback-control blocks. The DIP package is not the smallest option, but it offers a straightforward assembly method for prototypes and systems where through-hole parts are preferred. Because the LM2902SNG is a quad amplifier, unused amplifier channels should be configured according to the datasheet guidance rather than left with floating inputs. For robust implementation, follow the manufacturer datasheet for decoupling, input common-mode range, output swing, stability, and compensation requirements. Pay particular attention to input and output signal levels when operating near the supply rails. Decoupling capacitors should be placed close to the supply pins, and each amplifier channel should use a feedback configuration appropriate to the desired gain and bandwidth. This page summarizes the verified product identity, package, and application context while distinguishing confirmed characteristics from parameters that require direct datasheet confirmation.

RFQ İletişim
LM2902T14-13 - Quad 1.3MHz Op Amp, 14-TSSOP | Diodes Inc.
LM2902T14-13

LM2902T14-13 - Quad 1.3MHz Op Amp, 14-TSSOP | Diodes Inc.

The Diodes Incorporated LM2902T14-13 is a low-power, general-purpose quad operational amplifier with four amplifier circuits, a 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, and 375 uA typical supply current, housed in a 14-pin TSSOP package. It provides four amplifiers in one package for applications requiring several independent analog signal-conditioning channels. An operational amplifier, or op amp, is a high-gain analog building block used to amplify, buffer, compare, filter, and shape voltage signals. The quad configuration places four amplifiers in one package, reducing board area compared with four separate single or dual amplifier packages. The LM2902 family is therefore useful where designers need multiple general-purpose analog channels with consistent operation in a compact surface-mount footprint. The principal performance characteristics are a 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, and 375 uA supply current. The 14-TSSOP package has a stated width of 4.40 mm and is suitable for compact, surface-mounted PCB designs. Its four-channel architecture is particularly useful for sensor conditioning, multi-axis signal processing, analog measurement systems, and general buffer or amplifier networks. The LM2902T14-13 operates as a voltage-feedback amplifier, allowing feedback networks to establish gain, filtering, and signal-shaping behavior. The 1.3 MHz gain-bandwidth product supports moderate-bandwidth closed-loop operations rather than high-speed signal chains. Its 100 dB open-loop gain provides high loop gain, while the low 375 uA supply current suits battery-operated and low-power equipment when system-level power consumption is a priority. Typical uses include four-channel sensor interfaces, low-frequency active filters, differential signal conditioning, transducers requiring multiple buffers, instrumentation amplifiers using several amplifier stages, and general-purpose analog control boards. The quad organization also reduces component count and simplifies PCB routing when several independent amplifier functions are required. A critical design consideration is maintaining adequate output swing and common-mode range for the signal being amplified. Feedback components should be selected to keep closed-loop bandwidth, offset error, and output loading within acceptable limits. Decoupling capacitors must be placed close to the supply pins to reduce supply-noise coupling into the amplifier. This product page organizes the LM2902T14-13 technical characteristics, package information, application guidance, and verified source links into a practical engineering reference for general-purpose analog design.

RFQ İletişim