Ürünler (46.000+)

LPC1114LVFHN24/303 - 50MHz Cortex-M0 32KB MCU | NXP
LPC1114LVFHN24/303

LPC1114LVFHN24/303 - 50MHz Cortex-M0 32KB MCU | NXP

The NXP Semiconductors LPC1114LVFHN24/303 is a 32-bit ARM Cortex-M0 microcontroller with up to 32 kB flash, 8 kB SRAM, and an 8-channel 8-bit ADC, housed in a 24-pin HVQFN (4x4 mm) package and operating at CPU frequencies up to 50 MHz. A microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals, used as the control element in embedded systems. Within this hierarchy, the Cortex-M0 is a 32-bit ARM core, and the LPC11xxLV family from NXP is positioned as a low-cost 32-bit replacement for 8-bit and 16-bit MCU applications, offering higher performance, lower power, and a simple instruction set with reduced code size compared to existing 8/16-bit architectures. Key features of the LPC1114LVFHN24/303 include the ARM Cortex-M0 core running at 50 MHz, 32 kB on-chip flash (32K x 8), 8 kB SRAM, and a low-voltage supply operation consistent with the LPC1100LV series designation. The compact 24-HVQFN exposed-pad package suits space-constrained designs, and peripherals such as USART, SPI/SSP, I2C, timers, and the 8-bit ADC support typical embedded connectivity and sensing tasks. The Cortex-M0 architecture uses a von Neumann structure with a 32-bit instruction set subset (56 instructions) and Thumb code density, making code smaller than comparable 8/16-bit cores while delivering deterministic interrupt handling via the Nested Vectored Interrupt Controller (NVIC). The single-cycle I/O porting and configurable pin function multiplexing on the LPC1114 allow flexible peripheral mapping on the limited 24-pin footprint. According to NXP and Arm Keil documentation, typical applications for the LPC1100LV series include 8/16-bit application migration, eMetering, lighting, alarm systems, and general embedded control. The LPC1114LVFHN24/303 fits designs needing 32-bit performance and 32 kB flash in a 4x4 mm QFN. Important design consideration: NXP lists the LPC1114LVFHN24 base part as End of Life (per the NXP product page), so verify stock and plan a replacement strategy before new designs; consult the manufacturer datasheet for exact supply voltage limits and pin mapping. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
LPC11A02UK - 50MHz ARM Cortex-M0 MCU | NXP | WLCSP-20
LPC11A02UK

LPC11A02UK - 50MHz ARM Cortex-M0 MCU | NXP | WLCSP-20

The NXP Semiconductors LPC11A02UK is a 50 MHz, 32-bit Arm Cortex-M0 microcontroller with 16 kB of Flash memory and 4 kB of SRAM, housed in a 20-WLCSP package. It is designed for compact embedded products that need efficient control processing, mixed-signal sensing, and low power operation in a very small footprint. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one component. The LPC11A02UK belongs to the LPC11Axx family of low-cost 32-bit MCUs and uses the Arm Cortex-M0 architecture, which provides a compact instruction set for responsive embedded control. Its 16 kB Flash supports firmware storage, while its 4 kB SRAM provides working memory for control routines and data buffers. Key features include operation up to 50 MHz, a 1-bit ADC, a 10-bit DAC, an analog comparator, a temperature sensor, an internal voltage reference, and under-voltage lockout protection. The verified distributor information identifies the device as a WLCSP-20 packaged microcontroller with 18 I/O ports and a supply voltage range of 2.6 V to 3.6 V. These features allow the MCU to support sensing, actuator control, monitoring, and low-speed communication tasks within a compact embedded design. The LPC11A02UK uses a 32-bit Arm Cortex-M0 processor and is positioned as a low-cost member of the LPC11Axx microcontroller family. The Cortex-M0 core is suitable for deterministic, compact embedded-control code where simplicity, low silicon cost, and compact packaging matter. The device combines digital control with configurable analog and mixed-signal peripherals, allowing one MCU to supervise sensors, drive outputs, and manage local system conditions. Typical applications include battery-powered sensor nodes, compact industrial monitoring modules, consumer accessories, small motor-control subsystems, and embedded control boards. The 20-WLCSP package is especially useful where PCB area is constrained. Designers should confirm the exact ball map, exposed-pad requirements, supported peripherals, and pin multiplexing against the manufacturer datasheet before laying out a new PCB or replacing another device. This page consolidates verified manufacturer and distributor information, package details, application guidance, and purchasing considerations. Pricing and availability can change by quantity and supplier, so procurement should be confirmed against current distributor listings. For replacements, pin compatibility and peripheral equivalence must be verified rather than inferred from the family name alone. The LPC11A02UK is an active NXP product suitable for engineers seeking a compact Arm Cortex-M0 controller with integrated sensing and monitoring functions. Its principal trade-offs are small package availability, limited memory compared with larger MCUs, and the need for careful board-level validation around the 20-WLCSP footprint.

RFQ İletişim
LPC11A04UK - 50MHz Cortex-M0 MCU, 32KB Flash | NXP
LPC11A04UK

LPC11A04UK - 50MHz Cortex-M0 MCU, 32KB Flash | NXP

The NXP Semiconductors LPC11A04UK is a low-cost, 32-bit Arm Cortex-M0 microcontroller operating up to 50 MHz, with 32 KB of Flash, 8 KB of SRAM, and 4 KB of EEPROM in a 20-WLCSP package measuring 2.55 mm by 2.55 mm. The verified distributor data identifies an 18-I/O device and configurable analog or mixed-signal resources for compact embedded control designs. A microcontroller is a programmable system-on-chip that integrates a CPU core, nonvolatile program memory, working memory, peripherals, and input/output into one package. The LPC11A04UK belongs to the MCU, embedded processor, semiconductor, and Arm Cortex-M0 hierarchy. It targets cost-sensitive control, sensing, communication, and actuator functions where deterministic low-power behavior and compact packaging are valuable. The LPC11A04 family operates at CPU frequencies up to 50 MHz and includes a Nested Vectored Interrupt Controller, a system tick timer, Serial Wire Debug, an ISP and IAP-capable on-chip bootloader path, and up to 16 kB of boot ROM according to the verified Keil device record. Its memory combination supports compact firmware, working state, and retained parameters without requiring external memory for many designs. NXP describes the LPC11Axx family as a scalable entry-level MCU family with a low-cost 32-bit instruction set and software-configurable analog and mixed-signal subsystems. The architecture is suitable for small control loops, but designers should verify the exact peripheral set, clock limits, pin multiplexing, and electrical limits against the official device documentation before releasing a PCB. Typical uses include low-power sensor nodes, simple motor-control helpers, compact industrial controls, consumer accessories, and connected embedded products. The 20-WLCSP package supports dense layouts, while its small ball pitch and exposed thermal and routing complexity make careful PCB assembly and inspection important. The principal design trade-off is integration versus inspection risk. The LPC11A04UK consolidates processing, memory, GPIO, and configurable analog functions into a tiny package, reducing board area but increasing sensitivity to pad geometry, solderability, and layout quality. This page combines the supplied manufacturer and distributor records, pricing evidence, package details, design guidance, and verified cross-reference findings. It also distinguishes documented facts from missing technical data instead of estimating electrical limits, pin functions, or drop-in alternatives that the supplied sources do not establish.

RFQ İletişim
LPC11A12FHN33/101 - 50MHz Cortex-M0 MCU | NXP
LPC11A12FHN33/101

LPC11A12FHN33/101 - 50MHz Cortex-M0 MCU | NXP

The NXP LPC11A12FHN33/101 is a 32-bit ARM Cortex-M0 microcontroller designed for cost-sensitive embedded control applications. It operates at up to 50 MHz, provides 16 KB of embedded Flash program memory, 4 KB of SRAM, and 1 KB of data EEPROM, and is available in a 32-pin HVQFN package with an exposed pad. The device operates from 2.6 V to 3.6 V and supports an industrial temperature range of -40°C to +85°C. An ARM Cortex-M0 microcontroller is a reduced-instruction-set 32-bit processor intended to provide efficient control performance with a simple programming model and compact code footprint. The LPC11Axx family belongs to the broader embedded-processing hierarchy of microcontrollers, embedded processors, and programmable semiconductor devices. This combination makes the LPC11A12FHN33/101 suitable for designs that need deterministic digital control without the cost or complexity of a higher-performance application processor. The part includes a 10-bit ADC, 28 GPIO, and communication-oriented peripherals suitable for compact control boards. Its 50 MHz Cortex-M0 core supports responsive interrupt handling and general-purpose firmware execution, while the 16 KB Flash and 4 KB SRAM provide practical space for protocol stacks, sensor processing, and supervisory logic. The 2.6 V minimum operating voltage is compatible with common 3.3 V embedded systems. Typical applications include energy-metering interfaces, industrial sensing, lighting control, alarm systems, portable equipment, and low-cost embedded controllers. The ADC can sample analog inputs without requiring a separate converter, while the GPIO count supports keys, indicators, relays, and external interface signals. The exposed-pad HVQFN construction also requires careful PCB thermal design to remove heat reliably from the device. For new layouts, follow the NXP package drawing and land-pattern guidance, connect the exposed pad to the appropriate ground plane, and place decoupling capacitors close to the power pins. Firmware design should use the LPC11Axx CMSIS device support package and account for the device-specific peripheral configuration and errata. This page combines manufacturer specifications, sourcing information, package details, and practical design guidance for engineers evaluating the LPC11A12FHN33/101.

RFQ İletişim
LPC11C14FBD48/301 - 32KB Flash Cortex-M0 MCU w/ CAN | NXP
LPC11C14FBD48/301

LPC11C14FBD48/301 - 32KB Flash Cortex-M0 MCU w/ CAN | NXP

The NXP LPC11C14FBD48/301 is an ARM Cortex-M0 based 32-bit microcontroller running at up to 50 MHz, with 32 KB of on-chip flash, 8 KB of SRAM, and an integrated C_CAN controller, housed in a 48-pin LQFP (7x7 mm) package. It belongs to the LPC1100 series, designed as a low-cost upgrade path for 8/16-bit MCU applications, offering higher performance with a simple Thumb/Thumb-2 instruction set and reduced code size compared to legacy architectures. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (flash), volatile data memory (SRAM), and peripherals such as timers, communication interfaces, and analog blocks into one package. MCUs sit at the bottom of the embedded computing hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. The Cortex-M0 class represents the smallest, lowest-power variant of the ARMv6-M architecture, with deterministic interrupt handling that makes it well-suited for real-time control. The on-chip C_CAN conforms to the ISO 11898-1 CAN 2.0B standard, eliminating the need for an external CAN transceiver controller in bus-node designs. Key features include a 50 MHz Cortex-M0 core with single-cycle multiplier, 32 KB flash with In-System Programming (ISP) and In-Application Programming (IAP), 8 KB SRAM, a 12 MHz internal RC oscillator trimmable to 1% accuracy, an integrated C_CAN 2.0B controller, one SSP/SPI, one I2C, one UART, four general-purpose timers, a 10-bit ADC with up to 8 input channels, and a windowed watchdog timer. Power consumption is rated at approximately 10 mA active and 1 mA in deep-sleep mode at 3.3 V. The architecture uses a 3-stage pipeline with the ARMv6-M Thumb instruction set. Code density is significantly improved over 8/16-bit cores, allowing more functionality in the same 32 KB flash budget. The integrated C_CAN block uses 256-byte message RAM, supporting both standard (11-bit) and extended (29-bit) identifiers, which simplifies fieldbus node designs. The 12 MHz IRC can be trimmed in software to within 1% across the full operating range, often eliminating the need for an external crystal. Typical applications include CAN node endpoints in industrial automation, e-metering and smart metering, LED lighting controllers, alarm system panels, white goods, sensor hubs, and low-cost building-automation gateways. The integrated CAN controller is the standout feature in this price/performance class - the part is positioned wherever an 8-bit MCU is being replaced but a CAN interface is also required. When designing with this MCU, place a 100 nF decoupling capacitor adjacent to each VDD pin and connect all VSS pins to a solid ground plane to reduce digital switching noise coupling into the ADC. The CAN TXD/RXD lines still require an external 3.3 V CAN transceiver such as the TJA1050 or SN65HVD230 to drive the bus. This page synthesizes distributor pricing, drop-in LPC11xx alternatives, design notes, and application guidance that is not consolidated in the manufacturer datasheet, helping engineers and procurement teams evaluate the LPC11C14FBD48/301 in a single view.

RFQ İletişim
LPC11E11FHN33/101 - 50MHz Arm Cortex-M0 MCU | NXP
LPC11E11FHN33/101

LPC11E11FHN33/101 - 50MHz Arm Cortex-M0 MCU | NXP

NXP Semiconductors LPC11E11FHN33/101 is an entry-level 32-bit microcontroller based on the Arm Cortex-M0 core, operating at up to 50 MHz and housed in a 32-HVQFN (7x7 mm) package with an exposed pad. It provides 8 KB of flash program memory, 4 KB of SRAM, 512 bytes of EEPROM, 28 I/O pins, and a selectable internal oscillator for compact embedded-control designs. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one package. The LPC11E1x family belongs to the ARM Cortex-M0 > 32-bit microcontroller > embedded processor > semiconductor hierarchy. Designed for cost-sensitive applications that replace 8-bit and 16-bit devices, it combines a simple instruction set, reduced code size, and low-power operation without requiring an external memory interface. Key features include a 50 MHz maximum CPU frequency, 8 KB flash for firmware, 4 KB SRAM for working data, and 512 bytes of EEPROM for nonvolatile parameters. The device provides 28 I/O pins and uses an internal oscillator, allowing a compact implementation with fewer external support components. Its 32-HVQFN package also reduces board area compared with leaded packages, although the exposed pad and fine-pitch land pattern require careful PCB layout. The LPC11E1x architecture combines a 32-bit Arm Cortex-M0 processor with low-cost integrated resources suitable for simple control systems. Its family description identifies scalable entry-level devices operating on Cortex-M0 or Cortex-M0+ cores at frequencies up to 50 MHz. Peripheral support includes communication-oriented functions such as USART, while the 28 available I/O pins allow digital sensors, switches, indicators, and actuators to be connected without a large external interface. Typical applications include industrial sensor nodes, compact motor and valve controllers, building equipment interfaces, low-power IoT endpoints, LED control systems, and small appliance controllers. It is particularly suitable when 8 KB of flash and 4 KB of SRAM are sufficient but a more capable 32-bit processor, removable logic, or UART connectivity is desired. The target MPN is supplied in tray packaging according to its ordering information. For PCB implementation, assign every package pin from the manufacturer's pin-description table and preserve the exposed-pad connection specified by the land pattern. Place decoupling capacitors close to the supply pins and route high-current outputs away from sensitive analog or communication traces. Confirm oscillator, reset, programming, and peripheral settings in the device configuration before releasing the design for production. This page consolidates the verified device specifications, package information, family-level comparisons, sourcing fields, and practical integration guidance. It also distinguishes documented electrical characteristics from parameters that still require confirmation against the manufacturer datasheet, helping engineers evaluate the LPC11E11FHN33/101 before board-level design begins.

RFQ İletişim
LPC11E14FBD48/401 - 32-bit 50MHz Cortex-M0 MCU | NXP
LPC11E14FBD48/401

LPC11E14FBD48/401 - 32-bit 50MHz Cortex-M0 MCU | NXP

NXP LPC11E14FBD48/401 is a 32-bit Arm Cortex-M0 microcontroller with a 50 MHz maximum CPU frequency, 32 KB of Flash memory, 10 KB of SRAM, and 4 KB of EEPROM in a 48-LQFP 7 x 7 mm package. The device provides 40 general-purpose I/O pins and is designed as a low-cost migration platform from 8-bit and 16-bit embedded systems to a 32-bit Arm architecture. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, peripheral interfaces, and I/O ports on one device. The LPC11E14FBD48/401 belongs to the microcontroller IC and embedded processor hierarchy, where its Arm Cortex-M0 core combines a simple instruction set with efficient 32-bit processing. This architecture is useful for control systems requiring more capability than an 8-bit MCU while retaining a compact package and economical implementation. Key features include up to 32 KB of Flash for firmware, 10 KB of SRAM for working data, 4 KB of EEPROM for parameters that must retain their values without power, 40 I/O pins, and operation up to 50 MHz. The NXP LPC11Exx family targets applications such as metering, lighting, alarm systems, consumer peripherals, and mobile-device accessories. Its combination of internal oscillator support and multiple serial interfaces supports compact designs without requiring extensive external components. The Arm Cortex-M0 processor provides a straightforward 32-bit instruction set and efficient code density for control workloads. The LPC11E14FBD48/401 can serve as the central controller for sensing, communication, actuator control, and system supervision. Because the target application determines the required peripheral mix and memory usage, engineers should review the manufacturer pin-description table and device errata before finalizing firmware and PCB assignments. Typical uses include smart lighting controllers, electronic utility meters, compact alarm panels, access-control equipment, sensor hubs, and low-power consumer accessories. The 48-LQFP package provides 40 external I/O pins, allowing multiple digital inputs, outputs, serial connections, and communication interfaces to be integrated without exposing a large BGA package to assembly complexity. The MCU is particularly suitable when an existing 8-bit design needs more processing headroom or standardized Arm-based tooling. For PCB implementation, reserve all 48 package positions according to the manufacturer land pattern, including power, ground, reset, programming, and no-connect assignments. Keep sensitive analog or timing-sensitive routes away from high-current switching paths and provide the required decoupling capacitors close to the supply pins. Confirm clock, memory, and peripheral requirements against the selected LPC11Exx variant before committing the design to production. This product page combines the LPC11E14FBD48/401 electrical characteristics, package details, application guidance, same-family drop-in candidates, and practical design notes. It helps engineers compare memory and connectivity requirements while preserving a migration path from legacy 8-bit and 16-bit control systems to a compact 32-bit embedded platform.

RFQ İletişim
LPC11E66JBD48E - 50MHz Cortex-M0+ MCU 64KB Flash | NXP
LPC11E66JBD48E

LPC11E66JBD48E - 50MHz Cortex-M0+ MCU 64KB Flash | NXP

The NXP LPC11E66JBD48E is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 50 MHz CPU frequency, integrating 64 KB of flash, 12 KB of SRAM, and 4 KB of on-chip EEPROM, housed in a 48-pin LQFP (7x7 mm) package. It is part of the LPC11Exx family, a low-cost 32-bit MCU series designed as a stepping stone from 8/16-bit architectures to modern Cortex-M performance with a simple instruction set that minimizes code size. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, peripherals, and I/O. The ARM Cortex-M0+ is ARM's smallest and most energy-efficient Cortex-M core, designed for deterministic embedded control. Loaders live in the broader hierarchy: Cortex-M0+ -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The LPC11Exx family targets applications transitioning from 8/16-bit MCUs by providing modern performance with familiar low-pin-count packages. Key features include a 12-bit ADC for sensor digitization, multiple serial interfaces (USART, SPI, I2C), PWM outputs for motor or LED control, and configurable GPIO. The integrated EEPROM (4 KB) eliminates the need for an external non-volatile memory chip for parameter storage, lowering BOM count. The 50 MHz CPU frequency provides ample headroom for protocol stacks and real-time control loops. Architecturally, the LPC11E66 uses the Cortex-M0+ core paired with a configurable AHB bus matrix, low-power peripherals, and a programmable ROM-based boot loader that supports in-system programming via UART or USB ISP. This combination allows field firmware upgrades without external programmers, which is valuable for deployed industrial and consumer products. Typical applications include home appliances, white goods, motor control peripherals, building automation nodes, low-cost sensor hubs, and consumer electronics requiring USB or CAN connectivity through on-chip interfaces. The wide operating voltage range (typically 1.8V-3.6V core) supports battery-powered devices. When designing with this MCU, ensure the decoupling network uses 100 nF X7R ceramics on each VDD/VDDA pin placed within 2 mm of the pad. Leave the ISP entry pin accessible (typically PIO0_1) to enable in-field firmware updates without disassembly. This page synthesizes distributor pricing, drop-in alternatives from NXP LPC11Exx family, and practical design notes not consolidated in the manufacturer datasheet, giving procurement and engineering teams a single reference for the LPC11E66JBD48E.

RFQ İletişim
LPC11E67JBD48E - 50MHz Cortex-M0+ MCU | NXP
LPC11E67JBD48E

LPC11E67JBD48E - 50MHz Cortex-M0+ MCU | NXP

NXP Semiconductors LPC11E67JBD48E is a 32-bit Arm Cortex-M0+ microcontroller in the LPC11Exx family, operating at up to 50 MHz with 128 KB of flash memory in a 48-LQFP package measuring 7 mm by 7 mm. The part is listed as active, providing a compact platform for cost-sensitive embedded control, sensor acquisition, actuator control, and connected industrial equipment. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Cortex-M0+ architecture belongs to the Arm microcontroller hierarchy and is designed for efficient, low-complexity control applications. NXP describes the LPC11Exx family as a low-cost 32-bit MCU family intended to replace 8-bit and 16-bit architectures while reducing code size through its efficient instruction set. The LPC11E67JBD48E therefore combines familiar microcontroller operation with a 32-bit processing architecture and a 50 MHz clock capability. The three defining parameters are a maximum CPU frequency of 50 MHz, 128 KB of flash memory organized as 128K by 8 bits, and a 48-LQFP package with a 7 mm by 7 mm body. Its ARM Cortex-M0+ core supports embedded software workflows that require deterministic control, peripheral integration, and moderate arithmetic performance. The 128 KB program-memory region is suitable for firmware, configuration handling, and application logic in compact industrial, consumer, and embedded-control products. The LPC11Exx positioning emphasizes a simple instruction set and code efficiency rather than high-end application-processing performance. That balance makes the LPC11E67JBD48E appropriate for controllers that repeatedly perform sensing, control, communications, and local supervision. At 50 MHz, the device provides additional timing headroom for interrupt-driven and mixed-control workloads while retaining the resource profile associated with an entry-level 32-bit MCU. Typical uses include building automation controls, temperature and environmental monitoring, small motor-control subsystems, industrial sensor hubs, appliance controllers, and low-cost connected peripherals. The 48-LQFP package exposes more pins than a minimal small-outline package, making the device suitable for designs that need a balance of peripheral access, compact board area, and assembly cost. Pin assignment and peripheral multiplexing must be checked against the manufacturer pin description and device data sheet before PCB routing. The principal design consideration is to verify the complete pin configuration, supported voltage range, clock setup, and peripheral assignments in the manufacturer documentation. Because this MCU family is intended for broad embedded use, firmware partitioning, watchdog behavior, reset handling, and low-power transitions should be established early. Decoupling, programming access, clock jitter, and unused-pin handling also need to follow the device's recommended hardware guidelines. This product page combines the NXP family positioning, distributor package and memory details, an exact-package replacement check, application guidance, and engineering-focused design notes. These resources help engineers evaluate the LPC11E67JBD48E before committing a compact control board to the LPC11Exx architecture.

RFQ İletişim
LPC11E67JBD48K - 32-Bit 50MHz Cortex-M0+ MCU | NXP
LPC11E67JBD48K

LPC11E67JBD48K - 32-Bit 50MHz Cortex-M0+ MCU | NXP

NXP Semiconductors LPC11E67JBD48K is a 32-bit ARM Cortex-M0+ microcontroller operating up to 50 MHz, with 128 KB of Flash memory and a 48-LQFP 7 x 7 mm package. It belongs to the LPC11Exx family, a scalable entry-level MCU range designed to replace 8-bit and 16-bit designs while retaining a simple instruction set and efficient code footprint. The verified manufacturer listing identifies this orderable variant as active. A microcontroller is an integrated circuit containing a processor core, program Flash, data memory, peripherals, and interface logic on one semiconductor device. The ARM Cortex-M0+ core provides a compact instruction set and deterministic embedded-control architecture. Within the product hierarchy, the LPC11E67JBD48K is an ARM-based microcontroller, an embedded processor, and a semiconductor intended for cost-sensitive control applications. The LPC11E67JBD48K combines a maximum 50 MHz operating frequency with 128 KB of Flash organized as 128K x 8. This combination supports firmware storage while avoiding the memory cost and board area of a larger microcontroller package. The 48-LQFP 7 x 7 mm package offers a surface-mount solution with a comparatively compact body, although its lead pitch must be accommodated by the PCB land pattern and assembly process. The LPC11Exx family also includes devices with up to 256 kB Flash, 36 kB SRAM, and 4 kB EEPROM according to the verified datasheet listing. A 12-bit ADC is identified in the same source. Device-specific ADC, SRAM, EEPROM, clock, and peripheral details must be confirmed in the manufacturer datasheet before assigning pins or calculating firmware resource requirements. Typical uses for this microcontroller class include compact industrial controllers, building and access-control equipment, appliance controls, sensing nodes, and low-cost embedded products. The 50 MHz Cortex-M0+ performance is useful for responsive control loops and moderate protocol handling, while the 128 KB Flash capacity allows application firmware and configuration data to be stored locally. Designers should verify the exact LPC11E67JBD48 pin assignments, peripheral multiplexing, clock limits, decoupling requirements, and exposed-pin treatment in the NXP datasheet. The verified web results do not provide a complete public pin table, so this record does not infer pin names or provide a fabricated package diagram mapping. PCB design and firmware bring-up should also account for the LQFP lead geometry rather than a leadless QFN footprint. This product record combines current NXP lifecycle information, distributor inventory and pricing evidence, family-level technical data, strict data-availability markers, and procurement guidance. It distinguishes verified device facts from parameters that still require confirmation, helping engineers avoid treating broader LPC11Exx family capabilities as guaranteed LPC11E67JBD48K specifications.

RFQ İletişim
LPC11E67JBD64E - 50MHz Cortex-M0+ 128KB MCU | NXP
LPC11E67JBD64E

LPC11E67JBD64E - 50MHz Cortex-M0+ 128KB MCU | NXP

NXP Semiconductors LPC11E67JBD64E is a 32-bit ARM Cortex-M0+ microcontroller with a 50 MHz maximum CPU frequency, 128KB of flash memory, and 20KB of SRAM in a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the LPC11Exx scalable entry-level MCU family, combining an efficient ARM Cortex-M0+ core with embedded flash, SRAM, and mixed-signal peripherals in one compact surface-mount package. An ARM Cortex-M0+ microcontroller is a compact embedded-processing device used to execute firmware, read sensors, control outputs, and manage communication peripherals. The LPC11Exx family sits within the broader hierarchy of microcontroller, embedded processor, semiconductor, and embedded-control systems. Its 32-bit architecture provides an efficient platform for cost-sensitive products requiring deterministic real-time control without the resources of a higher-performance Cortex-M processor. The LPC11E67JBD64E provides 128KB of flash for program storage and 20KB of SRAM for data, stack, and working memory. Its maximum CPU frequency is 50 MHz. The device is supplied in a 64-LQFP package, providing 64 external pins for power, ground, resets, clock inputs, and peripheral connections. The verified distributor information also identifies the device as a 3.3 V part and as a member of the LPC11Exx family. Detailed GPIO allocation, operating-temperature limits, and individual peripheral characteristics remain subject to the manufacturer datasheet. The ARM Cortex-M0+ core supports a compact instruction set optimized for embedded control, while the integrated memory allows firmware and working data to share a single package and PCB footprint. This integration reduces component count and simplifies board routing compared with a discrete processor-plus-memory implementation. The 50 MHz operating rate provides useful headroom for protocol handling, digital control loops, and supervisory tasks while maintaining a low-complexity architecture. Typical uses include industrial control modules, sensor-hub boards, communication equipment, building automation, appliance controllers, and compact embedded data-acquisition products. The 128KB flash capacity is suitable for moderate firmware images, while 20KB SRAM supports networking stacks and control buffers without requiring external memory. Its 64-LQFP package also makes the device accessible for prototype assembly and conventional surface-mount manufacturing. Designers should verify the complete pin assignment, peripheral multiplexing, and electrical limits against the manufacturer datasheet before layout release. The 3.3 V supply requirement should be paired with appropriate decoupling and signal-level planning for connected modules. Because exact GPIO, timing, temperature, and qualification data were not included in the verified results, those values should not be inferred from the family description alone. This product record combines verified distributor specifications, official manufacturer identification, package information, sourcing references, and engineering-focused selection guidance. It also distinguishes the LPC11E67JBD64E from higher-memory family variants and documents the limited number of confirmed pin-compatible alternatives rather than presenting unverified substitutes as drop-in devices.

RFQ İletişim
LPC11E68JBD48E - 50MHz Cortex-M0+ 256KB MCU | NXP
LPC11E68JBD48E

LPC11E68JBD48E - 50MHz Cortex-M0+ 256KB MCU | NXP

The NXP Semiconductors LPC11E68JBD48E is a low-cost 32-bit microcontroller based on the Arm Cortex-M0+ processor, operating at up to 50 MHz, with 256 KB of flash memory, 36 KB of SRAM, and 48 leads in a 7 x 7 mm LQFP package. It belongs to the LPC11Exx family, which targets cost-sensitive designs that need more processing capability and memory than traditional 8-bit or 16-bit microcontrollers. A microcontroller is a compact programmable system containing a processor core, nonvolatile program memory, volatile data memory, and integrated peripherals. The LPC11Exx family combines a simple instruction set with 32-bit processing, enabling efficient control firmware for industrial, embedded-control, communications, and sensing products. Its low-cost positioning helps reduce system complexity when a more capable processor is unnecessary. The LPC11E68JBD48E provides 256 KB of flash for firmware and 36 KB of SRAM for working data. A 50 MHz CPU clock supports responsive execution of control tasks, state machines, and communication routines. The 48-LQFP package provides 48 external connections and a 7 x 7 mm body size, making the device appropriate for compact boards assembled with conventional leaded surface-mount processes. The Arm Cortex-M0+ architecture uses a compact instruction set designed for embedded applications. Compared with an 8-bit MCU, the 32-bit architecture offers a larger addressing space and higher processing throughput. The NXP LPC11Exx family is specifically positioned as a cost-conscious bridge between conventional 8-bit and 16-bit controllers and more complex 32-bit processors. Typical uses include industrial equipment controllers, sensor-interface systems, building automation, compact communication modules, and low-cost consumer appliances. A design can use the 256 KB flash region for application firmware and the 36 KB SRAM for working variables, buffers, and peripheral data. The 50 MHz operating frequency also permits moderate protocol handling and real-time control without moving to a higher-power processor class. PCB design should preserve short return paths for power and ground and place decoupling capacitors close to the supply pins. Because the package has 48 gull-wing leads, assembly and inspection are simpler than with fine-pitch BGA packages, although board area remains greater than for a compact leadless package. Confirm the complete pin assignment, voltage limits, and peripheral multiplexing in the NXP datasheet before layout release. This product page combines the exact LPC11E68JBD48E configuration, package details, lifecycle information, compatible family alternatives, and application-focused design guidance to support component selection and PCB implementation without relying on generic microcontroller descriptions.

RFQ İletişim
LPC11E68JBD48K - 50MHz Cortex-M0+ 256KB MCU | NXP
LPC11E68JBD48K

LPC11E68JBD48K - 50MHz Cortex-M0+ 256KB MCU | NXP

The NXP LPC11E68JBD48K is a 32-bit ARM Cortex-M0+ microcontroller operating up to 50 MHz, with 256 KB of flash memory and 36 KB of SRAM in a 48-LQFP 7 x 7 mm package. It combines a compact general-purpose MCU architecture with integrated connectivity and embedded-control features for cost-sensitive embedded systems. A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, peripherals, and interface controllers on one package. The LPC11E68 belongs to the LPC11Exx family, a low-cost 32-bit MCU platform intended to replace conventional 8-bit and 16-bit designs while providing higher processing performance, efficient code density, and broader peripheral integration. Key device characteristics include a 50 MHz ARM Cortex-M0+ core, 256 KB of flash for firmware, 36 KB of SRAM for working data, and a 48-LQFP package. The 2.4 V to 3.6 V operating range supports common embedded supply rails, while the compact 7 x 7 mm package supports space-constrained control boards. The LPC11Exx family also targets low-power operation and energy-efficient processing for embedded-control applications. The LPC11Exx architecture uses the ARM Cortex-M0+ instruction set, which provides deterministic 32-bit processing while maintaining code density appropriate for small embedded systems. Its combination of flash, SRAM, serial interfaces, timers, and GPIO allows one device to consolidate functions that might otherwise require several discrete controllers. The LPC11U68 member of the family adds configurable USB connectivity, making it especially relevant when USB connectivity is required. Typical uses include industrial control modules, sensor hubs, building automation controllers, compact instrumentation, appliance controls, and connected low-power peripherals. The 256 KB flash capacity accommodates more complex control firmware and protocol stacks than many entry-level 8-bit controllers, while 36 KB of SRAM provides working space for buffering, state management, and communication routines. Designers should treat the 2.4 V to 3.6 V supply range as the primary electrical boundary and verify every external signal and peripheral setting against the NXP datasheet. PCB layout should provide a stable ground reference, decouple the supply pins near the device, and preserve the package footprint and exposed thermal-pad requirements defined for the selected ordering configuration. This page combines the LPC11E68JBD48K family positioning, exact-ordering details, interface guidance, engineering trade-offs, and verified sourcing information to support faster component selection and PCB design. It also highlights the LPC11U68JBD48K as the closest USB-equipped family comparison for designs that require that connectivity.

RFQ İletişim
LPC11E68JBD64E - 50MHz Cortex-M0+ MCU, 256KB Flash | NXP
LPC11E68JBD64E

LPC11E68JBD64E - 50MHz Cortex-M0+ MCU, 256KB Flash | NXP

The NXP Semiconductors LPC11E68JBD64E is a 32-bit Arm Cortex-M0+ microcontroller operating up to 50 MHz, with 256 KB of flash memory and 36 KB of SRAM, housed in a 64-LQFP 10 mm × 10 mm package. It is designed for compact embedded systems that require efficient 32-bit processing, substantial code storage, and a broad set of mixed-signal peripherals. The LPC11Exx family combines a simple instruction set, low-power operation, and integrated analog and communication functions in a cost-focused architecture. An Arm Cortex-M0+ microcontroller is a 32-bit embedded processor built around the Armv6-M instruction set. Compared with an 8- or 16-bit controller, the LPC11Exx architecture provides larger addressing capability and more efficient handling of complex control logic. The LPC11E68JBD64E occupies the microcontroller hierarchy as a general-purpose embedded controller with integrated flash, SRAM, analog conversion, timers, serial interfaces, and communication peripherals. Its 50 MHz operating frequency supports responsive control while retaining a compact, low-power design profile. The principal device characteristics include up to 50 MHz CPU operation, 256 KB of flash, 36 KB of SRAM, and 4 KB of EEPROM. A 12-bit ADC supports analog measurement, while the family architecture provides communication capabilities suited to embedded control, sensor acquisition, and connected equipment. The LPC11Exx family was created for applications replacing 8- and 16-bit controllers when greater arithmetic capability, peripheral integration, and reduced firmware complexity are valuable without requiring a higher-tier application processor. The 64-LQFP package provides 64 externally accessible positions and a 10 mm × 10 mm footprint. This relatively large leaded package is suitable for conventional through-hole assembly, prototypes, and designs that benefit from inspectable leads rather than a fine-pitch land pattern. Board layout must preserve access to the ADC inputs, oscillator connections, reset circuitry, programming interface, power rails, decoupling, and all other pins defined in the manufacturer pin-description table. Typical uses include industrial sensing and control, building automation, appliance control, low-cost instrumentation, portable equipment, and embedded subsystems requiring local analog measurement and serial communications. The combination of 256 KB flash and 36 KB SRAM is useful when application firmware, configuration tables, diagnostics, and communication buffers must coexist without external memory. A key design consideration is firmware and peripheral planning. Allocate the ADC pins according to analog-channel requirements, follow the recommended decoupling arrangement, and keep sensitive analog traces away from fast switching nodes. Confirm startup, reset, and programming requirements against the manufacturer datasheet before releasing a PCB. Migration between LPC11Exx devices should also account for differences in USB, memory, peripheral, and temperature-grade options rather than relying on package similarity alone. This page consolidates the confirmed device identity, core memory and timing specifications, package information, sourcing workflow, application context, and verified drop-in alternatives. It also highlights the engineering checks that distinguish a true pin-compatible replacement from a merely similar 64-LQFP microcontroller.

RFQ İletişim
LPC11U12FHN33/201 - 50MHz USB Cortex-M0 MCU | NXP
LPC11U12FHN33/201

LPC11U12FHN33/201 - 50MHz USB Cortex-M0 MCU | NXP

The NXP LPC11U12FHN33/201 is a 32-bit ARM Cortex-M0 microcontroller operating up to 50 MHz, with 16 KB of flash memory, 6 KB of SRAM, and USB-device connectivity in a 32-pin HVQFN package measuring 7 x 7 mm. It combines a compact ARM-based control core with serial peripherals suited to low-cost embedded products. A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, and peripherals on one integrated circuit. The LPC11U12FHN33/201 belongs to the LPC11Uxx low-cost MCU family, whose architecture is intended to replace conventional 8-bit and 16-bit designs with a 32-bit instruction set, improved code efficiency, and integrated USB and serial communications. The device provides 16 KB of flash for firmware and 6 KB of SRAM for working data. Its stated peripherals include I2C, Microwire, SPI, SSP, UART/USART, and USB. This combination supports compact data-acquisition, metering, communications, alarm, lighting, and consumer-peripheral designs without requiring a separate USB interface IC. At a maximum clock frequency of 50 MHz, the Cortex-M0 core provides deterministic control for interrupt-driven and event-based peripherals. The 32-bit register architecture and compact ARM instruction set help reduce software overhead while retaining a straightforward programming model. Arm Keil identifies the part under the LPC1100 device family and CMSIS Pack LPC1100_DFP, supporting development with compatible ARM toolchains. The LPC11U12FHN33/201 is suitable for USB-connected accessories, energy-metering peripherals, LED-control systems, alarm equipment, industrial sensing nodes, and consumer peripherals. The integrated USB device controller is especially useful for configuration, logging, diagnostics, or firmware connectivity where a compact board area is more important than high data throughput. PCB design should preserve short USB traces, controlled return paths, and proper decoupling near each supply pin. Firmware must also account for USB enumeration, clock initialization, peripheral pin multiplexing, and the limited 6 KB SRAM. Before releasing a design, verify the complete pin assignment, exposed-pad connection, and electrical requirements in the NXP manufacturer documentation for the exact ordering code. This page consolidates the exact LPC11U12FHN33/201 identity, memory and interface characteristics, package information, sourcing guidance, and design considerations into an engineering-focused reference for PCB, firmware, and procurement planning.

RFQ İletişim
LPC11U14FHI33/201 - 50MHz 32-Bit USB MCU | NXP
LPC11U14FHI33/201

LPC11U14FHI33/201 - 50MHz 32-Bit USB MCU | NXP

NXP Semiconductors LPC11U14FHI33/201 is a 32-bit Arm Cortex-M0 microcontroller operating up to 50 MHz, with 32 KB of flash memory, 6 KB of SRAM, and USB device capability. The device is offered in a 32-pin HVQFN package measuring 7 x 7 mm, making it suitable for compact embedded systems where low cost, low power, and USB connectivity are important. Its operating voltage range is 1.8 V to 3.6 V. A microcontroller is a programmable semiconductor integrating a processor core, memory, and peripherals on one integrated circuit. The LPC11Uxx family is positioned between simple 8-bit controllers and more complex 32-bit application processors. It provides 32-bit processing, efficient code density, and low-power operation in packages designed for cost-sensitive consumer, industrial, metering, and connected peripheral products. The LPC11U14FHI33/201 includes 32 KB of flash for firmware and 6 KB of SRAM for working memory. Its Cortex-M0 core operates at frequencies up to 50 MHz and supports a compact instruction set that helps reduce code size. USB device functionality adds a standardized interface for configuration, data transfer, and control without requiring a separate USB interface controller. The 1.8 V to 3.6 V operating range supports low-voltage embedded systems and connected accessories. The LPC11Uxx architecture targets applications formerly handled by 8-bit and 16-bit microcontrollers while preserving a straightforward development model. Its integrated memory and USB support reduce external component count, and the 7 x 7 mm HVQFN package supports space-constrained board layouts. Firmware development uses the LPC1100 series device support, with Arm Keil device information and CMSIS support identified for the LPC11U family. Typical applications include USB-connected metering equipment, compact data-acquisition modules, configuration and programming tools, industrial interface controllers, consumer accessories, and low-power embedded nodes. The USB interface can simplify firmware update or data exchange, while the Cortex-M0 core provides enough performance for protocol handling, local control, and supervisory logic without requiring a higher-complexity processor. PCB design requires careful treatment of the HVQFN exposed pad, decoupling, USB routing, and ground-return paths. Place bulk and high-frequency decoupling capacitors close to their associated supply pins, connect the exposed thermal pad to a low-impedance ground plane, and follow the manufacturer land-pattern and USB-layout guidance in the datasheet. Validate signal integrity, power sequencing, and thermal performance before production release. This page combines the LPC11U14FHI33/201 specification summary, sourcing workflow, verified lifecycle status, drop-in replacement assessment, package considerations, and application-oriented design guidance for engineers evaluating this NXP USB microcontroller.

RFQ İletişim
LPC11U14FHN33/201 - 50MHz Cortex-M0 MCU | NXP
LPC11U14FHN33/201

LPC11U14FHN33/201 - 50MHz Cortex-M0 MCU | NXP

NXP LPC11U14FHN33/201 is a low-cost 32-bit microcontroller based on the Arm Cortex-M0 processor, operating up to 50 MHz with 32 KB of flash memory and 6 KB of SRAM in a 32-pin HVQFN package. The device targets control-intensive applications that need efficient 32-bit processing, compact code size, and a low-power architecture without the resource requirements of a larger microcontroller. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O into one package. The LPC11Uxx family occupies the low-end 32-bit segment of the embedded-control hierarchy and is commonly positioned as an upgrade from 8-bit or 16-bit architectures. Its Arm Cortex-M0 core uses a simple instruction set and provides deterministic peripheral access suitable for embedded control, metering, lighting, alarms, and consumer equipment. The headline configuration combines a 50 MHz clock with 32 KB flash and 6 KB SRAM, providing enough memory for compact control firmware while keeping the device economical. Operation from 2.5 V to 3.3 V supports common embedded supply systems. The 32-HVQFN surface-mount package offers a compact board footprint, while its exposed-pad construction provides a thermal connection to the PCB for improved heat dissipation. The manufacturer lists the LPC11U14FHN33 as an active product. The LPC11Uxx architecture was created for low-cost 8-bit and 16-bit migration paths. Compared with a conventional 8-bit controller, a 32-bit Cortex-M0 core offers a wider address space, more efficient arithmetic, and greater software ecosystem compatibility. The simple Cortex-M0 instruction set also reduces code-size overhead compared with more complex processor architectures, helping preserve the limited flash and SRAM budget. Typical uses include energy metering, lighting control, alarm systems, consumer peripherals, and mobile accessories. These applications benefit from the combination of 50 MHz processing, 6 KB SRAM, and a compact 7 x 7 mm package. The Arm Keil device support entry identifies metering, lighting, alarm systems, consumer peripherals, and mobile devices as representative LPC1100-series applications. PCB design should preserve the exposed-pad thermal path with a continuous ground-connected copper area and the manufacturer-recommended via arrangement. Decoupling should follow the circuit requirements in the LPC11Uxx datasheet, and programming, reset, clock, and unused-pin decisions should be checked against the device pin-description table before layout release. This product page combines the exact orderable MPN, core and memory characteristics, practical application guidance, package considerations, and a transparent comparison with the identified same-package family alternative. It also organizes sourcing, documentation, firmware-support, and replacement questions around the LPC11U14FHN33/201 for faster engineering evaluation.

RFQ İletişim
LPC11U24FBD48/301 - 50MHz Cortex-M0 USB MCU | NXP
LPC11U24FBD48/301

LPC11U24FBD48/301 - 50MHz Cortex-M0 USB MCU | NXP

The NXP LPC11U24FBD48/301 is a 32-bit ARM Cortex-M0 microcontroller with a maximum CPU frequency of 50 MHz, 32 KB of flash memory, USB device support, and a 48-LQFP 7x7 mm package. It is designed for low-cost embedded applications requiring 8/16-bit-class control, compact code size, low power operation, and communication peripherals in a surface-mount package. A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripherals, and communication interfaces on one integrated circuit. The LPC11Uxx family belongs to the 32-bit microcontroller hierarchy and uses the ARM Cortex-M0 instruction set. Its combination of 50 MHz processing, 32 KB flash, USB device connectivity, and integrated memory makes it suitable for compact control, sensing, data-acquisition, and connected peripheral designs. Key features include a 32-bit ARM Cortex-M0 core operating up to 50 MHz, 32 KB flash, up to 10 KB SRAM, up to 4 KB EEPROM, USB device operation, and USART communication. The LPC11U24FBD48/301 supports 2.5 V and 3.3 V supply operation, while its 48-LQFP package provides a 7x7 mm surface-mount footprint with externally accessible pins for compact PCB layouts. The LPC11Uxx architecture is intended to provide low-cost 8/16-bit-class microcontroller operation with the benefits of a 32-bit platform. The Cortex-M0 core supports a compact instruction set and efficient embedded software execution, while the integrated USB device interface allows the MCU to communicate directly with a host system. Depending on the selected device variant, the family also includes memory-mapped peripherals and low-power operating characteristics for embedded control applications. Typical applications include USB-connected data-acquisition modules, energy-metering equipment, industrial sensing nodes, building-control interfaces, portable measurement instruments, and embedded accessories that require a small processor with USB connectivity. The MCU can serve as the central controller for sensor conditioning, local configuration, data formatting, and host communication without requiring a separate USB interface device. The principal design consideration is power-domain integration. The 2.5 V and 3.3 V operating references must be matched to the voltage levels of the USB interface, attached sensors, and external peripherals. Decoupling, grounding, USB signal routing, and careful placement of the MCU and support components should follow the layout guidance in the manufacturer datasheet. Firmware compatibility should also be verified when selecting a replacement because ROM-code and peripheral differences can affect software behavior. This product page combines the manufacturer’s device information, distributor availability references, package details, and practical design guidance to help engineers identify the LPC11U24FBD48/301 for embedded USB-control designs.

RFQ İletişim
LPC11U24FHI33/301 - 50MHz Cortex-M0 USB MCU | NXP
LPC11U24FHI33/301

LPC11U24FHI33/301 - 50MHz Cortex-M0 USB MCU | NXP

The NXP Semiconductors LPC11U24FHI33/301 is a 32-bit Arm Cortex-M0 microcontroller operating up to 50 MHz, with 32 KB of flash memory and USB device connectivity in a 32-pin HVQFN 5 x 5 mm package. The LPC11U24FHI33/301 also provides 6 KB of SRAM and 4 KB of EEPROM for firmware, working data, and configuration storage. A microcontroller is a compact semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC11U2x family belongs to the hierarchy of 32-bit embedded processors within the broader category of microcontrollers and embedded semiconductors. Its Arm Cortex-M0 architecture uses a simple instruction set designed to provide good code density for cost-sensitive control systems that previously used 8-bit or 16-bit processors. The LPC11U24FHI33/301 supports CPU operation up to 50 MHz and combines 32 KB flash with 6 KB SRAM. Its USB device capability makes it useful for data acquisition, configuration interfaces, human-interface devices, and portable peripheral designs. Serial communications include USART support, while the manufacturer describes the family as a low-cost, low-power platform for embedded control and USB-connected products. The controller combines a deterministic Arm Cortex-M0 core with on-chip memory and communication peripherals in one compact package. This integration reduces external component count and simplifies firmware access to code, data, USB, and serial interfaces. Designers should use the NXP datasheet pin-description table and package drawing to assign the 32 HVQFN connections, including the exposed thermal pad, before laying out the PCB. Typical uses include USB-to-serial adapters, compact data loggers, industrial interface modules, sensor controllers, access-control peripherals, and embedded USB accessories. The 50 MHz operating rate supports responsive control and communication tasks, while the 32 KB flash budget is best suited to compact firmware rather than large graphical or protocol-heavy applications. For a new PCB, preserve the HVQFN 32 land pattern and place all required decoupling capacitors close to their associated supply pins. Confirm the exact voltage, pin, clock, and peripheral configuration against the manufacturer datasheet before release, because those details are fundamental to safe firmware operation. This product page combines the manufacturer overview, package and memory characteristics, sourcing guidance, and engineering-focused selection considerations to clarify where this low-cost USB microcontroller fits within an embedded design.

RFQ İletişim
LPC11U24FHN33/401 - 32-bit Cortex-M0 USB MCU | NXP | 50MHz
LPC11U24FHN33/401

LPC11U24FHN33/401 - 32-bit Cortex-M0 USB MCU | NXP | 50MHz

The NXP Semiconductors LPC11U24FHN33/401 is a 32-bit ARM Cortex-M0 microcontroller operating up to 50 MHz, with 32 KB of embedded flash, 8 KB of SRAM and USB device connectivity in a 32-pin HVQFN 7 x 7 mm package. It is designed for cost-sensitive applications that need more capability than an 8-bit or 16-bit controller without adopting a higher-performance Cortex-M3 or Cortex-M4 core. The integrated USB device interface, 10-bit ADC, timers, serial interfaces and flexible low-power modes make the device suitable for connected peripherals, measurement equipment and compact embedded products. A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripheral interfaces and power-management functions on one package. The LPC11U24FHN33/401 belongs to the LPC11Uxx family of low-cost 32-bit microcontrollers and uses the ARM Cortex-M0 instruction set. Its architecture is intended to provide efficient event-driven control, compact firmware, deterministic peripheral access and low power consumption for embedded systems. Key characteristics include 50 MHz maximum CPU frequency, 32 KB flash, 8 KB SRAM, 4 KB data EEPROM according to the product information, and an operating voltage range of 1.8 V to 3.6 V. The device supports a 10-bit ADC and operates from -40 C to +85 C. Its 32-HVQFN package, including an exposed thermal pad, supports compact surface-mount designs and improved heat dissipation when the PCB provides adequate copper area. The Cortex-M0 core provides a compact, low-complexity 32-bit processing environment for control loops, communication protocols, human-interface devices and data acquisition. Peripherals such as the USB device controller, ADC, UART, SPI and I2C interfaces allow the MCU to connect sensors, displays, storage devices and host systems. The 32 KB flash footprint is suitable for moderate firmware sizes, while 8 KB of SRAM supports protocol buffers, stack space and working variables. Typical applications include USB-connected industrial peripherals, e-metering equipment, alarm systems, lighting controllers, consumer peripherals and compact sensor nodes. The USB interface can simplify connection to a host computer or USB hub, while the ADC enables direct measurement of analog inputs. For battery-operated equipment, the family’s low-power design can reduce system energy between measurement and processing events. The principal design consideration is ensuring that firmware, USB routing, decoupling and exposed-pad thermal management are implemented together. Place input and output capacitors close to the supply pins, follow the manufacturer’s recommended USB impedance and routing guidance, and provide a continuous ground plane beneath the exposed pad. This page combines the manufacturer product information, distributor observations, package details and application guidance for engineers evaluating the LPC11U24FHN33/401.

RFQ İletişim
LPC11U34FHN33/311 - 50MHz Cortex-M0 MCU | NXP
LPC11U34FHN33/311

LPC11U34FHN33/311 - 50MHz Cortex-M0 MCU | NXP

The NXP Semiconductors LPC11U34FHN33/311 is a 32-bit Arm Cortex-M0 microcontroller operating up to 50 MHz, with 40 KB of flash memory, 8 KB of SRAM, and a 32-HVQFN surface-mount package measuring 7 mm by 7 mm. It is a member of the LPC11Uxx family, a low-cost embedded MCU platform intended for compact control, sensing, communications, and consumer-peripheral designs. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one device. The Arm Cortex-M0 core belongs to the microcontroller processor hierarchy and provides a compact, energy-efficient platform for embedded control. In the LPC11Uxx family, that general-purpose architecture is combined with USB device connectivity, USART communications, and mixed-signal peripheral functions for cost-sensitive applications. The LPC11U34FHN33/311 provides 40 KB of flash for firmware and constants, 8 KB of SRAM for runtime data, and operation up to 50 MHz. Its 3.3 V to 3.6 V operating-supply range suits 3.3 V system rails, while its -40 °C to +85 °C temperature range covers industrial-temperature requirements. USB device and USART functions support direct peripheral connectivity, data transfer, and external serial interfaces without requiring separate discrete controllers. The device uses the HVQFN package family, providing a compact 7 mm by 7 mm surface-mount solution. Its 0.65 mm terminal pitch supports dense PCB layouts, but the fine pitch also requires careful assembly planning and land-pattern verification. The Arm Keil device listing identifies the processor as Cortex-M0 at 50 MHz and associates it with the LPC1100 series and CMSIS Pack LPC1100_DFP, giving firmware developers a defined software-device-support path. Typical uses include low-cost 8-bit and 16-bit embedded-control replacements, metering equipment, lighting systems, alarm systems, consumer peripherals, mobile-device accessories, and compact IoT nodes. The LPC11U34FHN33/311 is especially relevant when a design needs USB device connectivity and a USART within a small Cortex-M0 controller rather than a larger general-purpose microcontroller. PCB implementation should begin with the exact NXP package drawing and pin-description table, especially for the 32-HVQFN footprint. Place decoupling capacitors close to the supply pins, preserve a continuous return path beneath the device, and validate the 0.65 mm-pitch assembly process. Firmware decisions should be checked against the NXP datasheet and the LPC1100_DFP device support package. This product page combines the confirmed LPC11U34FHN33/311 identity, 50 MHz Cortex-M0 performance, 40 KB flash, 8 KB SRAM, package details, sourcing guidance, and practical design considerations. It also separates confirmed technical attributes from parameters that require confirmation from the manufacturer datasheet before design release.

RFQ İletişim
LPC11U66JBD48E - 50MHz Cortex-M0+ 64KB MCU | NXP
LPC11U66JBD48E

LPC11U66JBD48E - 50MHz Cortex-M0+ 64KB MCU | NXP

NXP Semiconductors LPC11U66JBD48E is a 32-bit Arm Cortex-M0+ microcontroller rated for operation up to 50 MHz, with 64 KB of flash memory in a 48-pin LQFP 7 x 7 mm package. It belongs to the LPC11Uxx family of low-cost, energy-efficient microcontrollers designed as scalable replacements for conventional 8-bit and 16-bit embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one device. The Cortex-M0+ core provides a simple instruction set and compact code footprint, while the LPC11Uxx family combines this processing efficiency with flexible low-power features for embedded control, sensing, and communications equipment. The LPC11U66 provides 64 KB of flash, 12 KB of SRAM, and a maximum CPU frequency of 50 MHz. Its flexible peripheral set is intended to replace several discrete components in cost-sensitive embedded products. The 48-LQFP package exposes the integrated communications and general-purpose peripherals required by protocols, sensors, human-interface equipment, and low-power control systems. The Arm Cortex-M0+ architecture also supports efficient event-driven firmware, helping developers balance processing performance, code density, and energy use. Compared with an 8-bit MCU, the 32-bit processor provides a wider address space and more capable interrupt-driven control. Compared with higher-end Cortex-M systems, the LPC11U66 maintains a low-cost positioning without abandoning 32-bit software development tools. Typical uses include compact industrial controllers, connected sensor nodes, building-control modules, appliance control boards, communications equipment, and embedded access devices. The 48-LQFP package is appropriate for designs that need a moderate number of externally routed pins and a conventional leaded footprint that is easier to inspect and assemble than very fine-pitch packages. Designers should verify the complete pin assignment, peripheral multiplexing, clock configuration, and power requirements against the NXP datasheet before layout release. A stable decoupling network and correct programming-tool configuration are essential for reliable operation. The manufacturer product page identifies LPC11U66JBD48 as active, while distributor listings provide sourcing and packaging information. This page consolidates verified manufacturer information, distributor availability, practical selection guidance, and same-package alternatives for engineers evaluating the LPC11U66JBD48E. It also distinguishes confirmed source data from parameters that still require verification against the full manufacturer datasheet.

RFQ İletişim
LPC11U67JBD48E - 50MHz 128KB Flash MCU | NXP | USB Cortex-M0+
LPC11U67JBD48E

LPC11U67JBD48E - 50MHz 128KB Flash MCU | NXP | USB Cortex-M0+

NXP Semiconductors LPC11U67JBD48E is a 32-bit ARM Cortex-M0+ microcontroller operating up to 50MHz, with 128KB of Flash memory, 20KB of SRAM, USB connectivity, and a 12-bit ADC in a 48-LQFP (7x7) package. It is designed for cost-sensitive embedded systems that need efficient 32-bit control, flexible peripherals, and USB communication without the power and complexity of a higher-performance Cortex-M core. The LPC11Uxx family belongs to the microcontroller hierarchy: MCU > embedded processor > Arm Cortex-M0+ microcontroller > low-power embedded control. The Cortex-M0+ architecture provides a simple instruction set and efficient code density while retaining a 32-bit processing model. At up to 50MHz, the LPC11U67JBD48E is suitable for connected peripherals, human-interface systems, sensor controllers, and compact consumer or industrial equipment. Verified listings identify 128KB Flash, 20KB SRAM, USB, and a 12-bit ADC. The 48-LQFP (7x7) package provides a conventional leaded footprint that can simplify assembly and prototyping compared with a fine-pitch ball grid array. The 2.4V to 3.6V operating range supports common 3.3V system rails, although the complete electrical limits must be confirmed in the manufacturer datasheet before final design release. The USB capability makes the device useful for USB-to-serial adapters, configuration interfaces, HID peripherals, data acquisition controllers, and service ports. Its ADC supports applications that monitor analog sensors or industrial inputs without requiring a separate converter. The combination of 128KB Flash and 20KB SRAM gives embedded software room for protocol stacks, control logic, buffers, and application code. A typical design places the MCU beside its USB connector, 3.3V regulator, decoupling capacitors, crystal or clock source, and application peripherals. Keep USB differential routing short, controlled-impedance, and away from noisy switching nodes. Confirm oscillator, reset, USB, and peripheral pin assignments against the official datasheet before PCB routing. This page combines verified distributor specifications, sourcing information, application guidance, and same-footprint alternatives for engineering evaluation.

RFQ İletişim
LPC11U67JBD64551 - 50MHz Cortex-M0+ MCU | NXP
LPC11U67JBD64551

LPC11U67JBD64551 - 50MHz Cortex-M0+ MCU | NXP

The NXP Semiconductors LPC11U67JBD64551 is a 32-bit, single-core ARM Cortex-M0+ microcontroller operating up to 50 MHz, with 128 KB of flash memory in a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the LPC11Uxx family of low-power embedded microcontrollers designed for compact control, sensing, and communication-oriented products. An ARM Cortex-M0+ microcontroller is a reduced-instruction-set processor core integrated with memory, peripherals, and communication interfaces on one semiconductor device. The Cortex-M0+ hierarchy places the part within embedded processors, microcontrollers, and the broader semiconductor category. Its 32-bit architecture and 50 MHz maximum clock rate provide useful processing performance for control tasks while retaining a compact, energy-conscious design footprint. The LPC11U67JBD64551 provides 128 KB of flash memory, organized as 128K by 8 bits, for firmware storage. Its 64-LQFP package supports surface-mount assembly and exposes the device's interface pins on a standardized 10 mm by 10 mm footprint. These characteristics make the MCU suitable for embedded control boards, sensor nodes, industrial modules, and compact consumer devices that require more program storage than a small entry-level microcontroller. The LPC11U67 designation identifies the device within the LPC11U family, while the full ordering code LPC11U67JBD64551 identifies the exact configuration offered for sourcing. The listing identifies the component as an NXP USA Inc. LPC11Uxx microcontroller with an ARM Cortex-M0+ core, single-core architecture, 50 MHz operating frequency, 128 KB flash, and 64-LQFP package. Detailed memory-map, peripheral, electrical, and programming information should be confirmed against the NXP device documentation before a new design is released. Typical applications include low-power sensor hubs, building and industrial control modules, compact motor-control boards, communications equipment, and embedded accessories. The 128 KB flash capacity allows more application code and configuration data than very small microcontroller variants, while the 10 mm by 10 mm LQFP package simplifies inspection, hand rework, and prototype-board assembly compared with leadless packages. Designers should treat the LPC11U67JBD64551 as a surface-mount embedded device rather than a simple logic component. Confirm the exact pin assignment, peripheral availability, voltage limits, clock configuration, programming interface, decoupling requirements, and exposed-pad requirements in the official device documentation. Keep sensitive programming and debug connections accessible, and follow the recommended decoupling and layout patterns to preserve signal integrity and reliable startup. This product page consolidates the exact orderable MPN, source-backed core and package information, sourcing guidance, and practical replacement considerations. It also distinguishes the standard LPC11U67 ordering options from unrelated Cortex-M0+ devices, helping engineers avoid cross-platform substitutions that may fit a similar application but do not preserve the target's package, pinout, firmware environment, and peripheral configuration.

RFQ İletişim