Ürünler (46.000+)

LPC1768FET100Y - 100MHz Cortex-M3 MCU | NXP | 100-TFBGA
LPC1768FET100Y

LPC1768FET100Y - 100MHz Cortex-M3 MCU | NXP | 100-TFBGA

The NXP Semiconductors LPC1768FET100Y is a 32-bit Arm Cortex-M3 microcontroller operating at 100 MHz, with 512 kB of flash memory, 64 kB of data memory, and a 100-TFBGA (9 x 9 mm) package. The device integrates Ethernet MAC, USB Device, USB Host, and USB OTG connectivity, an 8-channel DMA controller, four UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, and I2S support. It also includes an 8-channel 12-bit ADC, a 10-bit DAC, and motor-control PWM. Designed for embedded applications, the LPC1768 combines high peripheral integration with low power consumption in a compact surface-mount package. Its 100 MHz Cortex-M3 core provides the processing performance required for connected industrial equipment, communications controllers, data acquisition systems, and real-time embedded control. An Arm Cortex-M3 microcontroller is a 32-bit embedded processor built around the ARMv7-M architecture and the Cortex-M3 profile. This product type sits within the hierarchy of embedded processor, microcontroller, and semiconductor. Unlike a general-purpose application processor, a Cortex-M3 MCU combines a processor core with memory and peripherals in one device, allowing compact embedded systems to execute control firmware, acquire analog data, exchange digital information, and drive timers or PWM outputs without a separate external processor. The LPC1768FET100Y provides 512 kB of flash for firmware and 64 kB of data memory for working storage. Its four UART interfaces support serial communications, while the two CAN channels are suited to robust controller-area-network communication. Three SSP/SPI interfaces, three I2C interfaces, and I2S support expand the range of sensors, displays, storage devices, audio peripherals, and bus devices that can be connected. The 8-channel 12-bit ADC supports multi-channel analog measurements, while the 10-bit DAC provides an analog output function. Peripheral integration reduces the component count in connected embedded equipment. The Ethernet MAC supports network-oriented designs, while the combined USB Device, Host, and OTG capability allows one controller architecture to serve peripheral, host, and dual-role applications. An 8-channel DMA controller can transfer data between memory and peripherals with limited processor intervention, which is useful when data movement must remain deterministic while the core executes control logic. Motor-control PWM supports timing and power-control functions in embedded systems. Typical applications include industrial automation and factory control, networked sensor gateways, CAN-based equipment controllers, USB-connected data acquisition units, communications equipment, and compact motor-control systems. The 100-TFBGA package is particularly relevant to space-constrained products where a high pin count and integrated communications peripherals are needed. PCB designers should assess via access, exposed-pad thermal requirements, and assembly capability before committing the design to this fine-pitch package. Before schematic capture, use the manufacturer pin-description and package-information tables to assign power, ground, clock, reset, analog, and communications signals. Confirm the external crystal or clock arrangement, decoupling requirements, Ethernet PHY interface, USB routing, and programming/debug access in the manufacturer documentation. The BGA land pattern also requires careful escape routing and via planning to preserve signal integrity and manufacturing yield. This page consolidates the exact device identity, interface inventory, package information, sourcing path, and application guidance for engineers evaluating the LPC1768FET100Y. It also distinguishes verified drop-in options from broader functional alternatives, helping teams make a footprint, memory, peripheral, and firmware-migration decision before committing an embedded design to production.

RFQ İletişim
LPC1768UKJ - 32-Bit 100MHz Cortex-M3 MCU | NXP
LPC1768UKJ

LPC1768UKJ - 32-Bit 100MHz Cortex-M3 MCU | NXP

The NXP Semiconductors LPC1768UKJ is a 32-bit ARM Cortex-M3 microcontroller operating at 100 MHz, with 512 KB of flash memory in a 100-TFBGA (9x9 mm) package. It is designed for connected embedded systems that require broad peripheral integration and low power consumption. The verified distributor listing identifies the device as part of the LPC17xx family and specifies a 100-pin thin-film ball grid array package. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, and peripherals such as serial interfaces and communications controllers. The ARM Cortex-M3 architecture provides a compact instruction set suited to real-time control, while the LPC1768 platform integrates connectivity-oriented peripherals into one component. In the electronics hierarchy, this part is a microcontroller, or MCU, within the broader semiconductor and embedded-processing categories. The principal verified specifications are a 100 MHz maximum operating frequency, 512 KB of flash organized as 512K x 8, a 32-bit ARM Cortex-M3 core, and a 100-TFBGA package measuring 9 x 9 mm. These characteristics make the LPC1768UKJ suitable for control-intensive equipment requiring substantial local program storage and a compact, high-pin-count surface-mount footprint. The availability of Ethernet, USB, and CAN is identified in the family-level datasheet result, although detailed interface operating limits are not provided in the supplied target-page data. The LPC1768 family integrates extensive on-chip peripherals to reduce external component count and board area. The family description emphasizes high integration and peripheral support for embedded applications, while the LPC1768UK product-page result identifies migration compatibility within the LPC1700 family. Designers should nevertheless verify the exact peripheral pin assignments, electrical limits, and package ball map for LPC1768UKJ against the manufacturer documentation before releasing a PCB. Typical applications include industrial control, networked embedded equipment, USB-connected peripherals, automotive or transportation electronics, communications infrastructure, and compact consumer products. The 512 KB flash capacity provides room for networking stacks, protocol handlers, control firmware, and application logic, while the 100 MHz Cortex-M3 core supports deterministic multitasking and peripheral servicing. A critical design consideration is the fine-pitch 100-TFBGA footprint. PCB layout must provide adequate escape routing, power and ground distribution, and manufacturing capability for the package. Firmware developers must also configure clocks, pins, memory, and peripherals for the exact LPC1768UKJ variant rather than relying only on generic LPC1768 documentation. This page combines the verified distributor description, family-level technical context, package information, sourcing details, and engineering-oriented selection guidance. It is intended to help engineers identify the correct MCU, plan a compatible board, and distinguish verified facts from details that still require confirmation in the official documentation.

RFQ İletişim
LPC1768UKZ - 100MHz Cortex-M3 MCU with 512KB Flash | NXP
LPC1768UKZ

LPC1768UKZ - 100MHz Cortex-M3 MCU with 512KB Flash | NXP

The NXP Semiconductors LPC1768UKZ is a 100 MHz, 32-bit ARM Cortex-M3 microcontroller with 512 KB flash memory, 64 KB data memory, Ethernet MAC, USB, and extensive serial peripherals in a 100-ball BGA package. The UKZ package option and integrated connectivity target industrial, communications, control, and embedded data-acquisition systems where a high pin count and compact footprint are valuable. It combines a single Cortex-M3 core with an 8-channel 12-bit ADC, 10-bit DAC, four UARTs, two CAN channels, three SSP/SPI interfaces, three I²C interfaces, I²S, DMA, and motor-control PWM. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor designed around the ARM Cortex-M3 instruction set, combining deterministic interrupt handling, compact code execution, and extensive peripheral integration. In the product hierarchy, the LPC1768UKZ is a microcontroller MCU and embedded processor within the broader semiconductor category. Its 512 KB flash supports embedded firmware, while 64 KB of data memory supports working storage. NXP describes the LPC1768 family as a scalable mainstream solution for embedded applications requiring high integration and low power consumption at frequencies up to 100 MHz. The principal differentiators are the combination of 100 MHz operation, 512 KB flash, Ethernet MAC, USB Device/Host/OTG, eight-channel DMA, and a broad peripheral set in one device. The 8-channel 12-bit ADC supports multiple analog inputs without requiring an external converter, while the 10-bit DAC provides an on-chip analog output for control or signal-generation tasks. Four UARTs, two CAN channels, three SSP/SPI interfaces, three I²C interfaces, and I²S reduce the need for external communication controllers. Motor-control PWM further supports actuator and power-control designs. The supplied NXP product information confirms the LPC1768UK family identity, while distributor records identify LPC1768UKZ as the ordering variant associated with a 100-pin, 3.3 V device. Exact voltage ranges, pin assignments, current limits, package dimensions, temperature limits, and clock-tree details require confirmation in the manufacturer datasheet because those values are not fully included in the supplied search extracts. The LPC1768UKZ should therefore be selected against the complete datasheet and board-level requirements before release to production. Typical applications include industrial Ethernet controllers, USB-connected embedded systems, CAN-based automation equipment, motor-control systems, data loggers, communications equipment, and multi-channel sensor acquisition systems. The combination of Ethernet, USB, CAN, high-speed serial interfaces, and analog conversion allows a compact design to consolidate several functions normally distributed across separate ICs. This is particularly useful for industrial controllers, building-automation equipment, test systems, and connected embedded products. A critical design consideration is package and PCB verification. The LPC1768UKZ uses a high-pin-count BGA package according to distributor records, so escape routing, via-in-pad or fanout strategy, exposed-pad handling, assembly capability, and thermal performance must be confirmed before layout release. Software migration should also account for peripheral-instance names, clock configuration, pin multiplexing, startup code, and the exact Cortex-M memory map. This page consolidates the verified NXP family specifications, distributor package identification, pricing references, and application guidance. It distinguishes confirmed facts from missing datasheet details and avoids treating search-snippet information as a complete electrical characterization. Engineers should use the manufacturer datasheet for final pinout, timing, power, EMC, and qualification decisions.

RFQ İletişim
LPC1769FBD100K - 120MHz Cortex-M3 MCU with Ethernet | NXP
LPC1769FBD100K

LPC1769FBD100K - 120MHz Cortex-M3 MCU with Ethernet | NXP

The NXP Semiconductors LPC1769FBD100K is a 32-bit ARM Cortex-M3 microcontroller rated at 120 MHz, with 512 KB of flash memory, 64 KB of data memory, and a 100-pin LQFP package measuring 14 x 14 mm. Its integrated connectivity includes an Ethernet MAC, USB Device, USB Host, USB OTG, CAN, UART, SPI, I2C, I2S, ADC, DAC, and PWM peripherals, making it suitable for connected embedded control systems. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded systems. The Cortex-M3 core belongs to the ARM processor hierarchy and is used in microcontrollers, or MCUs, that combine processor performance, flash memory, static RAM, and programmable peripherals in one device. The LPC1769 places this processing capability within NXP's LPC17xx microcontroller family, combining communications, data conversion, and motor-control functions on one integrated circuit. The principal features include 120 MHz operation, 512 KB of program flash, 64 KB of data RAM, and an eight-channel 12-bit ADC. The device also provides a 10-bit DAC, eight-channel DMA controller, four UART interfaces, two CAN channels, three SSP or SPI interfaces, three I2C interfaces, and motor-control PWM. These resources reduce external peripheral count in Ethernet, industrial-control, data-acquisition, and USB-connected products. The LPC1769 architecture supports connected embedded applications without requiring separate Ethernet or USB controllers. Its eight-channel DMA controller can transfer data between memory and peripherals while the CPU performs other tasks, which is useful for high-throughput communication systems. The integrated 12-bit ADC supports analog measurements, while the 10-bit DAC supports basic analog output. Its 2.4 V to 3.6 V operating supply range accommodates common 3.3 V embedded platforms. Typical uses include industrial Ethernet controllers, USB data loggers, CAN-connected equipment, motor-control systems, audio interfaces, and compact embedded gateways. The Ethernet MAC and USB interfaces are especially useful for network-connected monitoring and control, while the CAN channels support industrial vehicle and machine communication. The 100-pin LQFP package also exposes enough I/O and peripheral connections for designs that require more integration than a small-package MCU provides. PCB implementation should preserve clean separation between analog and digital return paths, place decoupling capacitors close to the supply pins, and route Ethernet and USB signals according to their impedance and isolation requirements. Firmware must also be validated against the selected board, crystal configuration, memory map, bootloader, and peripheral assignments; changing order codes does not eliminate the need for system-level review. This product page combines manufacturer specifications, interface details, application guidance, package information, and engineering-focused replacement considerations. It also highlights where an LPC17xx family member can preserve the 100-pin footprint and where differences in memory or peripheral sets require explicit hardware and firmware validation.

RFQ İletişim
LPC1778FBD144K - 120MHz Cortex-M3 MCU with Ethernet | NXP
LPC1778FBD144K

LPC1778FBD144K - 120MHz Cortex-M3 MCU with Ethernet | NXP

The NXP Semiconductors LPC1778FBD144K is a 32-bit Arm Cortex-M3 microcontroller with a 120 MHz clock, 512 kB of embedded flash memory, 96 kB of SRAM, integrated Ethernet, and USB 2.0 device, host, and OTG support in a 144-pin LQFP package. It combines extensive connectivity and mixed-signal peripherals with an 8-channel DMA controller and low-power operation for embedded industrial, communications, audio, and motor-control systems. An Arm Cortex-M3 microcontroller belongs to the microcontroller hierarchy: embedded processor > microcontroller > 32-bit MCU > Arm Cortex-M3 device. This architecture provides a deterministic execution environment with interrupt-driven peripherals while retaining low power consumption and broad ecosystem support. The LPC1778 is positioned for connected embedded designs requiring more communication interfaces than a basic microcontroller but fewer resources than a high-end application processor. Key features include 512 kB of flash, 96 kB of data memory, Ethernet, USB 2.0 device, host, and OTG, an 8-channel DMA controller, five UARTs, two CAN channels, three SSP or SPI interfaces, three I2C interfaces, I2S support, and SD or MMC connectivity. An 8-channel 12-bit ADC and 10-bit DAC support mixed-signal measurement and output, while quadrature encoder inputs support motor and position-control applications. The LPC1778 integrates multiple communications engines around the Cortex-M3 core. Ethernet and USB enable network-connected control equipment and USB peripherals, while CAN, UART, SPI, I2C, and I2S support industrial networking, sensor networks, audio paths, and external memory or display peripherals. DMA reduces CPU intervention for transfers between memory and high-bandwidth peripherals, improving responsiveness in data-acquisition and communications systems. Typical applications include industrial Ethernet controllers, USB-to-serial or USB-to-field-bus gateways, audio interfaces, CAN-based vehicle or machine-control nodes, SD-card data loggers, motor-control systems, and compact industrial gateways. The 144-pin LQFP package exposes the broad peripheral complement without requiring the smallest possible package, simplifying PCB routing and inspection. Designers should verify the exact pin multiplexing, clock configuration, power-supply requirements, decoupling values, and startup limits against the NXP datasheet before layout. Although the 120 MHz operating frequency provides strong processing headroom, sustained Ethernet, USB, and DMA activity should be evaluated for interrupt latency, thermal conditions, and continuous bus bandwidth rather than inferred from peak clock speed alone. This page consolidates verified manufacturer and distributor information with package-specific alternatives, interface-focused comparisons, and practical selection guidance. It is designed to help engineers determine whether the LPC1778FBD144K provides the required memory, networking, and mixed-signal resources without confusing it with pin-compatible but feature-incompatible microcontroller options.

RFQ İletişim
LPC1778FBD208K - 120MHz Cortex-M3 MCU with 512KB Flash | NXP
LPC1778FBD208K

LPC1778FBD208K - 120MHz Cortex-M3 MCU with 512KB Flash | NXP

NXP Semiconductors LPC1778FBD208K is a 120 MHz Arm Cortex-M3 microcontroller with 512 kB of flash memory, 96 kB of data memory, and a 208-pin LQFP package. The device combines Ethernet, USB 2.0 device, host and OTG support, an 8-channel DMA controller, 5 UARTs, 2 CAN channels, 3 SSP/SPI interfaces, 3 I2C interfaces, I2S, an 8-channel 12-bit ADC, a 10-bit DAC, QEI, SD/MMC, and motor-control capabilities. It is designed for embedded systems requiring high integration, low power consumption, and extensive connectivity in a single 28 mm by 28 mm package. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripheral interfaces on one integrated circuit. The LPC1778 belongs to the Arm Cortex-M3 microcontroller, 32-bit embedded-controller, and integrated-circuit hierarchy. Its Cortex-M3 core operates at up to 120 MHz, allowing real-time control and network-oriented embedded workloads to share one controller while reducing the number of discrete components required on the board. Key features include 512 kB of flash for firmware, 96 kB of SRAM for working memory, and the extensive communication peripheral set listed by NXP. The integrated Ethernet and USB 2.0 interfaces support connected equipment without requiring separate controllers. Five UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, and I2S provide options for sensors, displays, industrial buses, storage, audio, and communications links. The 8-channel 12-bit ADC and 10-bit DAC support mixed-signal measurement and control. The 208-pin LQFP package exposes the device’s broad I/O and interface resources, including Ethernet, USB, CAN, serial buses, analog channels, motor-control signals, and external-memory interfaces. This high pin count is valuable when a system needs many independently connected peripherals without multiplexing several functions through a smaller package. Its 32-bit architecture and 120 MHz operating frequency provide ample compute performance for protocol handling, data acquisition, motor control, and supervisory tasks. Typical uses include industrial automation and factory equipment, networked embedded controllers, USB-to-Ethernet gateways, motor-control systems, data-acquisition equipment, and communications infrastructure. Ethernet and USB make it appropriate for supervisory controllers or gateways, while the CAN, serial, and analog interfaces can connect sensors and actuators. The integrated ADC, DAC, QEI, and motor-control features also suit position and closed-loop control applications. A critical design consideration is the 208-pin package’s routing and decoupling requirements. Place the required power and bypass capacitors close to their associated supply pins, provide a clean 3.3 V rail as identified by the verified distributor information, and route high-speed Ethernet and USB signals with controlled impedance and continuous reference planes. Firmware should also validate startup, clock configuration, memory mapping, and peripheral initialization before enabling external actuators. This page consolidates verified NXP and distributor information, interface details, application fit, and design guidance into one engineering-focused product record. It also distinguishes exact drop-in alternatives from broader functional equivalents, helping procurement and engineering teams avoid treating pin-compatible replacements and redesign-level substitutions as interchangeable.

RFQ İletişim
LPC1778FET208K - 120MHz Cortex-M3 MCU | NXP Semiconductors
LPC1778FET208K

LPC1778FET208K - 120MHz Cortex-M3 MCU | NXP Semiconductors

NXP Semiconductors LPC1778FET208K is a 32-bit ARM Cortex-M3 microcontroller for embedded applications, operating at frequencies up to 120 MHz and integrating 512 kB of flash memory, 96 kB of data memory, Ethernet, and USB 2.0 device, host, and OTG functionality. The device is offered in a 208-ball TFBGA package measuring 15 x 15 mm. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, data memory, and peripherals within one integrated circuit. The LPC1778 belongs to the Cortex-M3, 32-bit microcontroller, embedded processor, and semiconductor hierarchy. Its combination of communication interfaces, analog converters, and motor-control peripherals allows it to serve as the central controller in industrial, networking, communications, and embedded-control systems. Key features include a 120 MHz ARM Cortex-M3 core, 512 kB of flash, and 96 kB of data memory. Connectivity includes Ethernet, USB 2.0 device, host, and OTG operation. The peripheral set also provides an 8-channel DMA controller, five UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, I2S, an 8-channel 12-bit ADC, a 10-bit DAC, a quadrature encoder interface, and SD/MMC support. The integrated architecture reduces the number of external components required for embedded communication and control designs. Flash stores the firmware, while data memory supports working state, buffers, and communication data. The DMA controller can transfer data between peripherals and memory with less processor intervention, while the Ethernet and USB interfaces support network-connected and host-oriented equipment. The ADC and DAC add analog measurement and output capability directly to the microcontroller platform. Typical applications include industrial automation equipment, Ethernet-connected controllers, USB host or peripheral systems, CAN-based embedded networks, motor-control systems, data acquisition units, audio interfaces, and SD/MMC-based embedded products. The large TFBGA208 package exposes the broad collection of communication, analog, and general-purpose peripherals but requires careful escape routing and a multilayer PCB layout. Designers should verify the complete ball assignments, power rails, decoupling requirements, clock configuration, and exposed-pad connection in the manufacturer datasheet before layout. A TFBGA208 device has fine-pitch balls and many power connections, so conservative power-plane geometry, short return paths, and thorough signal-integrity review are essential. This page consolidates the manufacturer product information, interface capabilities, package details, application guidance, and verified drop-in alternatives. It also provides engineering-focused comparisons and design notes intended to make microcontroller selection and PCB implementation more efficient.

RFQ İletişim
LPC1785FBD208K - 120MHz Cortex-M3 MCU, 256KB Flash | NXP
LPC1785FBD208K

LPC1785FBD208K - 120MHz Cortex-M3 MCU, 256KB Flash | NXP

NXP LPC1785FBD208K is a 32-bit ARM Cortex-M3 microcontroller operating at 120 MHz, with 256 kB of embedded flash memory, 80 kB of data memory, and a 208-lead LQFP package. The device combines a high-performance 32-bit processor with extensive connectivity, including USB 2.0 Host/OTG/Device, an eight-channel DMA controller, five UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, and I2S support. An ARM Cortex-M3 microcontroller is a reduced-instruction-set processor core designed for embedded control. It belongs to the MCU and semiconductor hierarchy and combines real-time processing, interrupt handling, memory, and communication peripherals on one device. The Cortex-M3 architecture supports efficient event-driven control while the LPC1785 integration reduces the number of discrete components required for industrial, communications, and data-acquisition equipment. The principal device features include 120 MHz processing, 256 kB of flash for firmware, and 80 kB of data memory. Peripheral integration includes an eight-channel DMA controller, five UARTs, two CAN channels, three SSP/SPI channels, three I2C channels, I2S, and USB 2.0 Host/OTG/Device connectivity. An eight-channel 12-bit ADC and a 10-bit DAC support mixed-signal designs, while dedicated LCD, SD/MMC, and motor-control interfaces expand the range of suitable equipment. The LPC1785FBD208K is suited to embedded systems requiring both deterministic control and multiple communication standards. Eight DMA channels can move data between peripherals and SRAM with less processor intervention, while five UARTs support multiple serial links. Dual CAN capability is useful for industrial networking, while USB device, host, and OTG operation supports service interfaces, portable equipment, and peripheral connectivity. The 12-bit ADC can be used with suitable conditioning circuitry for sensors and process-control inputs. Typical uses include industrial automation controllers, USB-connected test equipment, CAN-based production machinery, data loggers, medical monitoring equipment, HMI systems, and compact motor-control platforms. The large 208-lead LQFP package exposes the broad peripheral set and provides ample I/O for systems that need numerous digital connections, converters, displays, and communication interfaces simultaneously. Designers should confirm pin multiplexing, peripheral availability, and voltage constraints in the manufacturer pin description table before routing the PCB. Power, ground, decoupling, and high-speed USB signals require careful partitioning. Because this is a large-pin-count MCU, stable power delivery, adequate thermal copper, and disciplined signal-return paths are as important as firmware configuration. This page consolidates the manufacturer's core specifications, interface requirements, sourcing workflow, and design considerations into one engineering reference. It also identifies the limits of drop-in replacement: firmware, pinout, memory, and peripheral compatibility must be reviewed together rather than treating an MCU substitution as a simple footprint exchange.

RFQ İletişim
LPC1788FBD144 - ARM Cortex-M3 MCU 512KB Flash 144-LQFP | NXP
LPC1788FBD144

LPC1788FBD144 - ARM Cortex-M3 MCU 512KB Flash 144-LQFP | NXP

The NXP Semiconductors LPC1788FBD144 is an ARM Cortex-M3 based 32-bit microcontroller with 512 KB flash and 96 KB SRAM, operating at up to 120 MHz in a 144-pin LQFP (20x20 mm) package. It features USB Device/Host/OTG, on-chip Ethernet MAC, an LCD controller, and 119 GPIO, packaged as LQFP-144 for high-density integration. According to the NXP product page, it is offered in the LQFP144 footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The Cortex-M3 is a 32-bit RISC processor core designed by ARM for deterministic, low-latency embedded applications. It sits in the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. LDOs themselves are voltage regulators, but in this case LPC1788FBD144 is a microcontroller, not an LDO - clarification is important because the LPC17xx family is sometimes confused with the TPS7A4701 LDO family due to similar prefix letters. Key features of the LPC1788FBD144 include up to 120 MHz CPU clock, 512 KB on-chip flash program memory, 96 KB SRAM, an 8-channel DMA controller, an external memory controller (EMC), USB 2.0 full-speed Device/Host/OTG, 10/100 Ethernet MAC, an LCD controller supporting TFT panels up to 1024x768, CAN, I2C, I2S, SPI, UART, 12-bit ADC, 10-bit DAC, PWM, and a Real-Time Clock (RTC). Per the NXP product page summary, the part is supplied from a 2.4 V to 3.6 V rail and integrates an Ethernet MAC and USB PHY on chip. The LPC1788FBD144 uses an ARM Cortex-M3 core with a 3-stage pipeline, hardware single-cycle multiply, and Tail-Chaining interrupt controller that reduces interrupt latency. The 96 KB SRAM is split between general use and SRAM bytes, with the bytes portion (typically 4 KB) retained in low-power modes for RTC backup. The Ethernet MAC supports MII/RMII interfaces to an external PHY, while the EMC allows expansion with external SRAM, NOR flash, or SDRAM. Typical applications for the LPC1788FBD144 include industrial HMI panels with TFT displays, building automation gateways, point-of-sale terminals, embedded data loggers, and USB/Ethernet-connected embedded controllers. The combination of large SRAM, integrated Ethernet and USB, and an LCD controller makes it particularly suited to graphics-rich industrial products. Designers should note that the 144-LQFP package has a relatively large 20x20 mm footprint and 0.5 mm pitch, requiring careful PCB layout for the high-speed Ethernet MII/RMII traces. Power supply decoupling is critical at the 3.3 V main and 1.2 V core rails, and the EMC bus must be length-matched for SDRAM. This page synthesizes distributor pricing, drop-in NXP family alternatives, and practical design notes that are not aggregated in the manufacturer datasheet.

RFQ İletişim
LPC1788FBD208K - 120MHz Cortex-M3 MCU | NXP Semiconductors
LPC1788FBD208K

LPC1788FBD208K - 120MHz Cortex-M3 MCU | NXP Semiconductors

The NXP Semiconductors LPC1788FBD208K is a high-performance 32-bit Arm Cortex-M3 microcontroller with a maximum operating frequency of 120 MHz, 512 kB of embedded flash memory, and 96 kB of data memory. It is offered in a 208-pin LQFP package measuring 28 mm by 28 mm and operates from a 3.3 V supply. The device integrates extensive communications and data-acquisition peripherals for industrial, networking, medical, and consumer embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one integrated circuit. The LPC1788 belongs to the Cortex-M microcontroller, embedded microcontroller, and 32-bit microcontroller hierarchies. Its Cortex-M3 architecture provides deterministic control-oriented performance while the large package exposes substantially more I/O than smaller microcontrollers, making the device suitable for systems requiring numerous communications channels, analog inputs, and external memory interfaces. Key features include Ethernet, USB 2.0 Host, OTG, and Device support, an eight-channel DMA controller, five UARTs, two CAN channels, three SSP or SPI interfaces, three I2C interfaces, and I2S. The device also provides an eight-channel 12-bit ADC, a 10-bit DAC, a quadrature encoder interface, an LCD controller, and SD or MMC connectivity. These integrated resources reduce the need for external interface controllers in connected embedded equipment. The 512 kB flash provides on-chip firmware storage, while 96 kB of SRAM supports working memory, protocol stacks, display buffers, and acquisition data. The eight-channel DMA controller can transfer data independently of the processor, improving responsiveness for Ethernet, USB, audio, and display workloads. The 120 MHz Cortex-M3 core provides the processing headroom required for network protocol handling, control loops, and simultaneous peripheral activity. Typical applications include industrial gateways and factory automation controllers, USB-to-Ethernet communication equipment, medical monitoring systems, audio and communications equipment, data acquisition controllers, and HMI systems with LCD output. The Ethernet and USB interfaces are especially useful for connected products requiring firmware updates or network management, while the CAN, UART, I2C, and SPI interfaces support mixed industrial connectivity. When designing around the LPC1788FBD208K, verify every external signal against the complete 208-pin datasheet pinout and preserve adequate decoupling around the 3.3 V supply. The broad peripheral set increases pin and routing complexity, so a multilayer board with a controlled ground plane is generally preferable to a dense single-layer implementation. Firmware should also account for USB, Ethernet, and DMA activity when allocating SRAM and validating timing. This product record combines verified manufacturer specifications, distributor availability, package information, and application-oriented design guidance. It also distinguishes exact-device order variants from broader MCU families that are not automatically drop-in replacements, helping engineers avoid assuming that matching memory size or package alone guarantees peripheral, pin, and software compatibility.

RFQ İletişim
LPC1810FET100 - 180MHz Cortex-M3 MCU in TFBGA100 | NXP
LPC1810FET100

LPC1810FET100 - 180MHz Cortex-M3 MCU in TFBGA100 | NXP

The NXP Semiconductors LPC1810FET100 is a high-performance, 32-bit Arm Cortex-M3 microcontroller with a maximum stated operating speed of 180 MHz, 136 kB of SRAM, CAN 2.0B, Quad SPI Flash Interface, and a State Configurable Timer. It is packaged in a 100-ball TFBGA package measuring 9 x 9 mm. The MCU is ROMless, so an external nonvolatile memory interface is required for firmware storage. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one package. The Cortex-M3 belongs to the Arm Cortex-M family of compact embedded processors, while the LPC1810 belongs to NXP's LPC18xx industrial microcontroller portfolio. This hierarchy places the device among flashless 32-bit MCUs intended for control, communications, and data-acquisition systems. The LPC1810FET100 combines a 150 MHz distributor-listed operating rating with an NXP product-page maximum of up to 180 MHz. Its 136 kB SRAM provides working memory for protocols, control loops, and buffered data. Peripheral integration includes CAN 2.0B for networked industrial equipment, a Quad SPI Flash Interface for external code and data storage, and a State Configurable Timer for flexible event timing or waveform generation. As a ROMless device, the LPC1810FET100 is intended to boot from external nonvolatile memory. The Quad SPI Flash Interface provides a dedicated path for code and configuration storage while the Cortex-M3 performs real-time processing. CAN support makes the device relevant to industrial controllers, motor-control equipment, instrumentation, and service-bus nodes where robust field-bus communication is required. Typical designs include industrial automation controllers, CAN-connected sensor gateways, embedded data-acquisition units, communications equipment, and compact control systems. External memory capacity and the selected firmware image determine how much application code and data can be stored. Engineers should also account for BGA assembly requirements, power-management design, clock configuration, and peripheral pin multiplexing. A key implementation consideration is the 9 x 9 mm TFBGA100 footprint. The board must provide all 100 balls, including power, ground, signal, and exposed thermal connections defined by the package drawing. Follow NXP's pin-connection and board-layout guidance to preserve signal integrity, provide clean supply rails, and maintain thermal performance during operation. This product page combines NXP device information, distributor package identification, strict same-package replacement analysis, and practical integration considerations. It also distinguishes a genuine PCB drop-in replacement from merely similar Cortex-M3 devices, helping engineers make sourcing and design decisions without assuming that equal memory size, package dimensions, or processor architecture guarantees pin compatibility.

RFQ İletişim
LPC1812JBD144E - 180MHz Cortex-M3 512KB Flash MCU 104KB SRAM LQFP-144 | NXP
LPC1812JBD144E

LPC1812JBD144E - 180MHz Cortex-M3 512KB Flash MCU 104KB SRAM LQFP-144 | NXP

The NXP Semiconductors LPC1812JBD144E is a high-performance 32-bit ARM Cortex-M3 microcontroller running up to 180 MHz with 512 KB (512K x 8) of on-chip flash memory and 104 KB of SRAM, offered in a 144-lead LQFP package measuring 20 x 20 mm. A microcontroller (MCU) is a single-chip computer: it integrates a CPU core, program and data memory, peripheral interfaces, clocking and debug logic onto one piece of silicon. An MCU sits at the lowest layer of the embedded hierarchy, below a system-on-chip and above the individual logic function. The Cortex-M3 core used here belongs to the ARMv7-M family, the mainstream embedded profile that balances deterministic interrupt latency with low power consumption, so the LPC1812JBD144E can run complex control loops, protocol stacks and human-machine interfaces without an external memory bus. Key features of this device include a 180 MHz maximum CPU frequency for high code throughput, 512 KB of flash for firmware and data tables, and 104 KB of on-chip SRAM that removes the need for external SDRAM in mid-complexity designs. Operating from a 2.2 V to 3.6 V supply lets the same board serve 3.3 V industrial rails, and the 144-pin LQFP body exposes enough I/O for multiple UART, SPI, I2C and timer resources, plus dedicated Ethernet and USB host/device capability in this device family. Technically, the part belongs to the NXP LPC18xx family of Cortex-M3 devices, which add system enhancements such as low-power operation, enhanced debug features and a high level of support-block integration. The 512K x 8 flash organization and 104 KB SRAM figure place it above entry-level Cortex-M0+ devices in code density while remaining simpler than pin-count-critical Cortex-M4 or M7 designs. Because the LQFP-144 lead count leaves generous routing room, the package avoids the assembly complexity of fine-pitch BGA options. Typical applications include industrial control and data-acquisition panels, motor and motion controllers, building automation gateways, protocol bridges for industrial Ethernet, USB-to-serial interface products, and network-connected sensor nodes that need substantial flash for logging. When designing around the LPC1812JBD144E, remember that the 144-pin LQFP footprint requires careful decoupling at every supply pin and adequate thermal copper under the device; keep high-speed and sensitive analogue routing away from the switching supply returns to avoid coupling noise into signal chains. This page consolidates the device specifications, package details, pin- and part-level drop-in alternatives, and practical design guidance in one place so engineers can qualify the LPC1812JBD144E for an existing 144-pin design before opening a hardware change request.

RFQ İletişim
LPC1812JET100E - 180MHz Cortex-M3 512KB MCU | NXP
LPC1812JET100E

LPC1812JET100E - 180MHz Cortex-M3 512KB MCU | NXP

The NXP Semiconductors LPC1812JET100E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a 180 MHz maximum CPU frequency, 512 KB of flash memory, and 104 KB of SRAM, housed in a 100-ball TFBGA package measuring 9 mm by 9 mm. It is designed for embedded applications requiring substantial flash capacity, fast deterministic execution, and a compact surface-mount footprint. The LPC1812JET100E combines the Cortex-M3 processor with integrated microcontroller resources for connected, industrial, communications, and consumer equipment. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor within the microcontroller and semiconductor hierarchy. The Cortex-M3 architecture uses a simplified instruction set and Thumb-2 technology to balance processing performance, deterministic interrupt handling, and low implementation complexity. Within the NXP LPC18xx family, the LPC1812JET100E is positioned as a high-performance MCU with 512 KB of program flash and 104 KB of SRAM, while retaining the peripheral and software ecosystem associated with the LPC18xx product line. Three principal characteristics define the part. Its 180 MHz operating frequency supports compute-intensive embedded workloads, while 512 KB of flash provides room for application code, firmware, and embedded data. The 104 KB of SRAM reduces dependence on external memory for working data and buffers. Its 100-ball TFBGA package, identified by the verified distributor data as a 9 mm by 9 mm package, supports compact designs but requires a fine-pitch PCB layout and careful manufacturing control. The Cortex-M3 architecture provides a 32-bit processing platform with efficient exception handling and low-power features intended for embedded use. The exact peripheral mix, clock configuration, I/O ratings, and electrical limits must be confirmed against the LPC1812JET100 manufacturer datasheet before final schematic or firmware sign-off. The supplied NXP product information identifies the MCU as a high-performance Cortex-M3 device and confirms the 512 KB flash, 104 KB SRAM, 180 MHz operating point, and TFBGA100 package used in this product record. Typical uses for the LPC1812JET100E include industrial data acquisition, communications equipment, USB-connected products, human-interface systems, and embedded control platforms with moderate code-storage requirements. Its 512 KB flash is useful for protocol stacks and application firmware, while 104 KB SRAM can support packet buffers, display interfaces, or multiple communication tasks. The 180 MHz Cortex-M3 core is particularly relevant when software timing, protocol handling, and control-loop calculations must coexist in one compact device. Designers should treat the fine-pitch TFBGA footprint as a manufacturing-sensitive implementation point. PCB layout must follow the NXP package drawing, including ball assignments, power routing, decoupling placement, and thermal-via requirements. Because the verified excerpts do not publish complete pin assignments, timing diagrams, or absolute maximum ratings, those values should be taken directly from the official datasheet rather than inferred from the distributor summaries. This product record combines verified manufacturer and distributor information with package-aware alternatives, practical PCB guidance, and direct answers to common sourcing and engineering questions. It is intended to accelerate component selection while clearly separating confirmed LPC1812JET100E facts from parameters that still require datasheet-level verification.

RFQ İletişim
LPC1813JBD144551 - 32-bit Cortex-M3 MCU | NXP | LQFP-144
LPC1813JBD144551

LPC1813JBD144551 - 32-bit Cortex-M3 MCU | NXP | LQFP-144

NXP Semiconductors LPC1813JBD144551 is a high-performance 32-bit ARM Cortex-M3 microcontroller with 512 KB of flash memory and 104 KB of SRAM in an LQFP-144 package. It combines a 32-bit ARM Cortex-M3 processor core with integrated connectivity-oriented peripherals, including Ethernet, making it suitable for embedded networking, industrial control, communications equipment, and connected industrial systems. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, clock circuitry, communication interfaces, timers, and general-purpose input/output ports. The ARM Cortex-M3 class belongs to the microcontroller hierarchy and is commonly used for real-time embedded control. Within that hierarchy, the LPC1813 combines general-purpose processing with higher-speed serial connectivity than a basic Cortex-M design, while its 144-pin package provides extensive external interface access. The principal specifications include a 32-bit Cortex-M3 core, 512 KB of flash memory for firmware, 104 KB of SRAM for working data, and an LQFP-144 surface-mount package. The 512 KB of flash supports a substantially larger embedded program than small general-purpose MCUs, while the 104 KB SRAM can accommodate network buffers, protocol state, display or communication data, and real-time application variables. Its feature set is positioned for connected embedded systems. Ethernet support is particularly useful for industrial terminals, network controllers, gateways, and embedded equipment that must communicate over an Ethernet network. The large pin count also supports multiple external interfaces and dedicated I/O, helping designers separate communication, control, sensing, and debug functions on a complex board. Typical applications include industrial Ethernet controllers, communications gateways, motor and motion-control equipment, data acquisition systems, and embedded network appliances. In each case, the MCU can execute control logic while Ethernet handles higher-level connectivity. The LQFP-144 footprint offers ample pins for external transceivers, memories, sensors, isolation interfaces, and power-management components. Board design should prioritize stable power and grounding, correct decoupling, signal integrity around Ethernet and high-speed digital interfaces, and careful programming of unused pins. Confirm the complete LPC1813 pin-description table, alternate-function settings, and exposed-pad requirements in the NXP LPC1813JBD144 datasheet before releasing the PCB layout. This product page consolidates the verified LPC1813JBD144 manufacturer specifications, package information, sourcing links, practical integration guidance, and same-footprint family options into one engineering-focused reference for designers evaluating the LPC1813JBD144551.

RFQ İletişim
LPC1813JBD144E - 180MHz Cortex-M3 MCU | NXP
LPC1813JBD144E

LPC1813JBD144E - 180MHz Cortex-M3 MCU | NXP

The NXP Semiconductors LPC1813JBD144E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a 180 MHz CPU, 512 KB of embedded Flash memory, and 104 KB of SRAM in a 144-pin LQFP package measuring 20 mm by 20 mm. It belongs to the LPC1800 family of embedded microcontrollers and combines a three-stage processor pipeline, low-power operation, and enhanced debugging capabilities for demanding embedded systems. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor designed around the Arm architecture. Within the product hierarchy, the Cortex-M3 core is implemented in a microcontroller MCU, which adds memory, peripherals, clocking, and interfaces to create a complete embedded-processing platform. The LPC1800 family is positioned for applications that require greater performance and I/O capability than typical entry-level microcontrollers. The LPC1813JBD144E's principal memory resources are 512 KB of Flash, organized as 512K by 8 bits, and 104 KB of SRAM. Its 180 MHz operating frequency supports compute-intensive control loops, responsive communications, and real-time peripheral handling. The large 144-pin LQFP package exposes a substantially broader I/O and peripheral set than smaller 32-pin or 48-pin microcontroller packages. At the architectural level, the Cortex-M3 core uses a three-stage pipeline and provides enhanced debug features alongside low-power-consumption capabilities. This combination allows firmware to execute from embedded Flash while retaining substantial RAM for protocol buffers, display data, acquisition records, or multitasking workloads. The processor architecture also supports efficient event-driven control, allowing the MCU to respond to external activity without requiring continuous high-rate polling. Typical applications include industrial supervisory control, connected embedded equipment, Ethernet-capable system controllers, instrumentation, communications gateways, and data-acquisition modules. The 144-pin package is particularly useful when a design needs many digital interfaces alongside a high-performance CPU and substantial local memory. Its LQFP construction also remains practical for prototype boards and mixed-technology assemblies that use through-hole-compatible lead pitches. When designing a board around the LPC1813JBD144E, follow the NXP pin-description table and recommended decoupling network exactly. Keep the 180 MHz signal path compact, provide the required crystal or clock components, and reserve continuous copper around the LQFP leads for soldering and thermal performance. Validate power sequencing, reset behavior, and every peripheral pin assignment before releasing a production PCB. This product page combines the confirmed LPC1813JBD144E identity, memory, speed, core, and package details with practical selection guidance and same-family drop-in options. It also distinguishes differences in Flash and SRAM resources so engineers can determine whether a substitution is electrically practical on the existing LQFP-144 footprint.

RFQ İletişim
LPC1813JET100551 - 180MHz 512KB Cortex-M3 | NXP
LPC1813JET100551

LPC1813JET100551 - 180MHz 512KB Cortex-M3 | NXP

The NXP Semiconductors LPC1813JET100551 is a high-performance, single-core 32-bit ARM Cortex-M3 microcontroller operating at up to 180 MHz, with 512 KB of flash memory in a 100-TFBGA 9x9 mm package. It belongs to the NXP LPC18xx family and combines a Cortex-M3 processor core with extensive connectivity and embedded-control peripherals for demanding industrial, networking, communications, and data-acquisition designs. An ARM Cortex-M3 microcontroller is a 32-bit processor core designed for embedded systems, where deterministic control, efficient interrupt handling, and low-power operation are more important than desktop-class computing performance. The LPC18xx family extends the Cortex-M3 architecture with NXP peripherals, fast connectivity interfaces, memory resources, and security-oriented control features. In the system hierarchy, this device is a microcontroller MCU, part of the broader semiconductor category and commonly positioned between simple logic controllers and higher-end application processors. The LPC1813JET100551 provides 512 KB of flash for firmware and 180 MHz processing performance. Its 100-TFBGA package supports compact, high-density PCB construction, while the LPC1813 device designation distinguishes it from related LPC18xx members with different feature sets. The product listing identifies the part as a single-core Cortex-M3 LPC18xx microcontroller, allowing designers to evaluate processor throughput, peripheral availability, memory requirements, and package complexity against their target application. For embedded-control designs, the combination of a 180 MHz Cortex-M3 core and 512 KB flash supports responsive control loops, protocol processing, and application logic without moving the design into a more complex processor category. The 100-TFBGA 9x9 mm footprint requires careful PCB layout because its fine-pitch balls, exposed thermal behavior, and routing density make assembly, inspection, and repair more demanding than those of a leaded package. Typical uses include industrial automation equipment, networked control systems, communications equipment, test and measurement instruments, and connected embedded products. Its application suitability depends on the specific peripheral mix, operating-temperature grade, memory map, and software requirements of the selected LPC1813 variant, all of which should be checked against the manufacturer documentation before schematic release. A key design consideration is package planning. Because the LPC1813JET100551 uses a 100-TFBGA 9x9 mm package, the PCB should follow the manufacturer land pattern, ball assignment, and recommended escape-routing guidance exactly. Power, ground, decoupling, clock, and high-speed interface routing should be planned together rather than treated as separate schematic tasks. This product page organizes the exact-orderable MPN, manufacturer identification, core and memory specifications, package details, replacement considerations, and application guidance into a design-oriented reference. It also distinguishes the verified LPC1813 options from related LPC18xx devices so engineers can focus first on footprint and peripheral compatibility rather than treating every family member as interchangeable.

RFQ İletişim
LPC1813JET100E - 180MHz Cortex-M3 MCU | NXP | Embedded Control
LPC1813JET100E

LPC1813JET100E - 180MHz Cortex-M3 MCU | NXP | Embedded Control

NXP Semiconductors LPC1813JET100E is a high-performance 32-bit microcontroller based on the ARM Cortex-M3 core, operating at up to 180 MHz with 512 KB of flash memory in a 100-pin TFBGA package measuring 9 mm by 9 mm. It belongs to the LPC18xx family of embedded microcontrollers designed for connected industrial, communications, and consumer equipment. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The ARM Cortex-M3 processor provides a 32-bit instruction set with efficient interrupt handling, while the LPC1813JET100E adds embedded flash, SRAM, and communication resources on a single package. In the system hierarchy, it is an MCU, an embedded processing IC, and a semiconductor used to supervise sensors, communications, actuators, and human-machine interfaces. The device's headline characteristics are its 180 MHz Cortex-M3 processing capability, 512 KB of embedded flash, and 100-pin TFBGA package. The LPC1800 family is positioned for applications requiring high-performance embedded control and a broad peripheral set. Family documentation identifies Ethernet, two high-speed USB interfaces, LCD support, and electromagnetic-compatibility design features, making the platform suitable for gateways, industrial controllers, network-connected equipment, and multimedia control systems. Performance is balanced by integration: the MCU combines a 3.3 V operating class with substantial embedded memory and high-speed serial connectivity. The exact LPC1813 variant configuration, including SRAM capacity and the availability of individual communication peripherals, should be confirmed against the manufacturer datasheet before schematic capture. Firmware developers should also verify clock, reset, power, and debug assignments in the pin description table rather than relying on assumptions based on another LPC18xx member. Typical uses include industrial Ethernet equipment, USB-connected control systems, network access points, programmable logic controllers, and embedded human-machine interfaces. An Ethernet interface can connect the controller to a supervisory network, while high-speed USB supports service ports, data acquisition links, or peripheral expansion. The Cortex-M3 architecture also supports common real-time control, communications, and monitoring workloads when firmware scheduling and interrupt priorities are designed carefully. A principal design consideration is fine-pitch BGA layout. The 100-pin TFBGA requires a PCB footprint and assembly process capable of handling dense ball pitches, and power, ground, and high-speed signal routing must follow NXP's reference layout and decoupling guidance. Designers should budget memory for the application, validate bootloader support, and confirm that the selected board configuration exposes every required communication interface. This product page combines the manufacturer identification, exact orderable MPN, distributor technical summary, known family capabilities, and engineering-focused selection guidance. It also distinguishes the LPC1813JET100E from closely related LPC18xx devices so designers can assess flash capacity, peripheral differences, package compatibility, and the practical effort required for a board-level substitution.

RFQ İletişim
LPC1815JBD144551 - 180MHz ARM Cortex-M3 MCU, 768KB Flash | NXP
LPC1815JBD144551

LPC1815JBD144551 - 180MHz ARM Cortex-M3 MCU, 768KB Flash | NXP

The NXP Semiconductors LPC1815JBD144551 is a high-performance 32-bit ARM Cortex-M3 microcontroller running at up to 180 MHz with 768 KB of on-chip flash, supplied in a 144-lead LQFP package measuring 20 mm x 20 mm. The device operates from a 2.2 V to 3.6 V supply and is offered on a reel-style ordering code (551) for high-volume automated assembly lines. A microcontroller (MCU) is a self-contained computing element that integrates a CPU core, embedded flash and SRAM memory, and a set of dedicated peripherals on one silicon die. The LPC1815 belongs to the NXP LPC18xx series, a Cortex-M3 based family of general-purpose MCUs widely used for bridging, connectivity and control tasks. In the device hierarchy, an MCU is a type of integrated circuit, a type of microcontroller, and a type of embedded processor. Key features of this part include a 180 MHz Cortex-M3 core with an efficient pipeline, 768 KB of flash program memory organised as 768K x 8 bits, and a supply operating range of 2.2 V to 3.6 V that matches 3.3 V industrial rails. The 144-pin LQFP package exposes a large peripheral complement and generous general-purpose I/O count for bus-heavy designs. The part is marked RoHS compliant for lead-free production. Technically, the LPC1815 core delivers 32-bit instruction execution with Thumb-2 encoding, so both 32-bit and 16-bit instruction sets run from the same flash. The wide 144-pin LQFP footprint is chosen over smaller packages when a design needs many peripheral instances, wide bus structures or extended storage interfaces alongside the CPU. The 20 mm x 20 mm body also spreads pin density, easing routing on multi-layer boards. Typical applications include industrial serial gateways and CAN/LIN network nodes, USB-connected data loggers and service interfaces, building and industrial automation controllers, and peripheral-heavy control boards where the large I/O count of the LQFP-144 package is more valuable than a minimal footprint. When designing around this device, plan decoupling close to the supply pins, budget flash and SRAM usage against the 768 KB program budget, and confirm the exact pin assignment in the manufacturer datasheet before committing PCB track routing, since the 144-pin pad pattern leaves no room for guesswork. This page consolidates distributor availability, verified pricing evidence, same-family drop-in alternatives and practical design notes into a single engineering reference that goes beyond the raw parameter tables found on standard distributor product pages.

RFQ İletişim
LPC1815JBD144E - 180MHz Cortex-M3 MCU | NXP | LQFP-144
LPC1815JBD144E

LPC1815JBD144E - 180MHz Cortex-M3 MCU | NXP | LQFP-144

NXP Semiconductors LPC1815JBD144E is a high-performance 32-bit Arm Cortex-M3 microcontroller operating up to 180 MHz, with 768 KB of flash memory and 136 KB of SRAM, housed in a 144-pin LQFP package measuring 20 mm by 20 mm. It is designed for embedded applications that require substantial flash capacity, fast Cortex-M3 execution, and a large pin count for mixed-signal and connectivity-intensive control systems. An Arm Cortex-M3 microcontroller is a 32-bit embedded processor that combines a deterministic interrupt architecture with low-power sleep modes and extensive peripheral integration. The Cortex-M3 core sits within the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. The LPC1815 family is designed to control industrial, communications, consumer, and instrumentation products while reducing the need for external memory and support devices. The principal device resources include a 180 MHz maximum clock, 768 KB of program flash, and 136 KB of SRAM. Its large LQFP-144 package exposes substantially more I/O than a small-lead package, allowing a design to allocate pins to communication interfaces, timers, analog functions, and control signals. The package and pin availability also make the device suitable for multilayer boards where routing density must be balanced against assembly complexity. Exact peripheral counts, voltage limits, and temperature limits must be confirmed in the NXP datasheet before schematic release. The Cortex-M3 architecture supports efficient handling of control loops, communications stacks, and interrupt-driven peripherals. Program storage is large enough for substantial application code, boot logic, protocol handlers, and configuration data, while the 136 KB SRAM provides working memory for buffers and real-time tasks. Engineers should still evaluate the worst-case RAM requirement of the selected middleware and allocate stack space separately from nominal application variables. Typical uses include industrial automation controllers, communications equipment, data-acquisition systems, motor and motion control, and embedded gateways. The 180 MHz processing capability supports responsive protocol handling and control tasks, while the 144-pin package provides access to a broad peripheral complement. A switching supply, signal-conditioning circuitry, isolation barriers, and protection devices should be selected around the MCU according to the application environment. For PCB implementation, use a multilayer layout with a continuous ground plane, short decoupling connections at each supply pin, and controlled return paths for high-speed or sensitive signals. Follow the NXP package drawing, land pattern, and recommended decoupling network exactly. Validate programming, clock, reset, and boot configurations on hardware before production, especially when an existing board is being adapted around the LPC1815JBD144E. This page combines the confirmed processor, memory, package, and sourcing details with practical considerations for firmware, layout, validation, and component selection. It also distinguishes confirmed drop-in family options from cross-brand replacements that require separate electrical and software qualification.

RFQ İletişim
LPC1815JET100E - 32-Bit 180MHz Cortex-M3 MCU | NXP
LPC1815JET100E

LPC1815JET100E - 32-Bit 180MHz Cortex-M3 MCU | NXP

NXP Semiconductors LPC1815JET100E is a high-performance 32-bit ARM Cortex-M3 microcontroller rated at 180 MHz, with 768 KB of embedded Flash memory and a 100-pin thin-film ball grid array package measuring 9 mm by 9 mm. The E suffix identifies the specific orderable LPC1815JET100E configuration, while the base LPC1815JET100 family is supported by the NXP product page. A microcontroller, or MCU, is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one package. In the electronic-component hierarchy, an MCU belongs to the embedded-processing class, then to microprocessor and microcontroller families, and ultimately to the broader semiconductor category. The LPC1800 family is positioned by NXP as a high-performance embedded family based on the Arm Cortex-M3 core. The LPC1815JET100E combines a 32-bit Cortex-M3 processor operating up to 180 MHz with 768 KB of Flash memory. Its 100-TFBGA package provides a compact surface-mount solution for embedded systems requiring substantial program storage. The part is specified for a 3.3 V operating supply according to the indexed product information. The LPC1800 family supports a broad set of embedded connectivity and control functions. Family-level product information identifies Ethernet, two high-speed USB interfaces, LCD support, and EMC-related features. These capabilities allow the LPC1815JET100E to serve as the central controller in connected embedded products rather than as a simple low-performance control element. Exact peripheral configuration and electrical limits should be confirmed against the NXP datasheet before schematic capture. Typical design roles include industrial control, communications equipment, human-machine interfaces, USB-connected products, and Ethernet-enabled embedded systems. Its 180 MHz Cortex-M3 execution rate suits responsive multitasking and signal-control firmware, while 768 KB of Flash provides room for application code, networking stacks, boot logic, and field-update functions. Package-sensitive designs should preserve the required 100-ball land pattern and provide adequate escape routing around the fine-pitch BGA. Design planning should begin with the package, power architecture, peripheral assignment, and required software support. Because a 100-pin TFBGA has fine-pitch balls and limited routing escape, high-speed interfaces, external memory, and power nets may require careful layer assignment. Confirm pin multiplexing, voltage domains, decoupling requirements, programming configuration, and thermal performance using the manufacturer datasheet. This product record combines the exact orderable MPN, indexed manufacturer and distributor information, package and memory characteristics, practical application guidance, and a conservative replacement analysis. It also distinguishes documented identity from engineering details that require direct verification in the NXP technical documentation.

RFQ İletişim
LPC1817JBD144E - 180MHz Cortex-M3 MCU with 1MB Flash | NXP
LPC1817JBD144E

LPC1817JBD144E - 180MHz Cortex-M3 MCU with 1MB Flash | NXP

NXP Semiconductors LPC1817JBD144E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a 180 MHz maximum clock, 1 MB of flash memory, and 136 kB of SRAM in a 144-LQFP 20 x 20 mm package. The device is designed for demanding embedded applications that combine real-time control, high-speed connectivity, and substantial local data storage. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor with integrated interrupt handling, debug support, and deterministic peripheral access. The Cortex-M3 belongs to the ARM microcontroller product family and provides the compute foundation for connected industrial equipment, communications infrastructure, human-interface systems, and real-time control products. The LPC1817 positions this architecture between a general-purpose MCU and a more specialized communications processor. Three headline capabilities distinguish the LPC1817JBD144E. Its 180 MHz operating frequency supports computationally intensive control loops and protocol processing, while its 1 MB flash capacity provides room for substantial firmware. The 136 kB SRAM allows data buffering without frequent external-memory transfers. NXP also identifies Ethernet, two high-speed USB interfaces, and LCD connectivity as important features for communications-oriented embedded systems. The LPC1817 family combines a high-performance Cortex-M3 core with extensive serial connectivity and application peripherals. Its 1 MB on-chip flash supports a complete embedded application image, while 136 kB of SRAM can accommodate network buffers, display data, and real-time working memory. Operating from a 3.3 V supply, the part provides an integrated platform for control logic, human-interface connectivity, and external communications. Typical applications include industrial Ethernet controllers, USB-enabled data-acquisition equipment, communications gateways, LCD-based operator panels, and embedded network appliances. In each case, the combination of Cortex-M3 performance, local memory, and multiple high-speed interfaces reduces the need for discrete support logic. Firmware can run directly from flash while SRAM handles active protocol and control data. Designers should preserve adequate decoupling across every supply rail and route high-speed USB and Ethernet signals according to the manufacturer’s layout guidance. The 144-LQFP package provides many pins for power, ground, communications, and peripherals, but its 20 x 20 mm body requires careful assembly planning. Confirm the exact exposed-pad, grounding, and signal-integrity requirements in the manufacturer datasheet before releasing the PCB layout. This page consolidates the key architecture, memory, packaging, sourcing, and drop-in replacement information into an engineering-oriented guide. It also identifies application-specific trade-offs so designers can determine whether the LPC1817JBD144E or a closely related LPC18xx device best matches a new PCB or an existing production design.

RFQ İletişim
LPC1817JET100E - 180MHz Cortex-M3 MCU | NXP Semiconductors
LPC1817JET100E

LPC1817JET100E - 180MHz Cortex-M3 MCU | NXP Semiconductors

The NXP Semiconductors LPC1817JET100E is a high-performance 32-bit Arm Cortex-M3 microcontroller with a maximum operating frequency of 180 MHz, 1 MB of flash memory, and a 100-pin TFBGA package measuring 9 mm by 9 mm. The device is designed for embedded applications requiring substantial local code storage, 3.3 V operation, and integrated serial communication interfaces. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry on one package. The LPC1817JET100E belongs to the NXP LPC18xx family of Cortex-M3 embedded processors. This family combines a 32-bit Arm architecture with flash-based program memory and multiple communication peripherals, providing a practical platform for industrial controllers, data-acquisition equipment, connected products, and human-machine-interface systems. The principal device characteristics include an operating frequency of up to 180 MHz, 1 MB of flash memory organized as 1M x 8, and a 100-contact TFBGA package. The LPC18xx family is manufactured using 90 nm ultra-low-leakage technology. Comparison data identifies 49 general-purpose I/O pins, two CAN controllers, and four UART interfaces for the LPC1817JET100E, allowing the controller to communicate with sensors, transceivers, displays, and service interfaces. The Arm Cortex-M3 core provides a compact 32-bit processing architecture suitable for real-time control, protocol handling, and supervisory logic. Its exception-based interrupt mechanism and integrated debug capabilities make the device useful in designs that require deterministic peripheral servicing without the complexity of a higher-end application processor. The LPC1817JET100E is positioned as a general-purpose embedded MCU rather than a wireless SoC, so radio connectivity must be implemented with external circuitry when required. Typical applications include industrial data loggers, CAN-connected machine controls, motor and actuator supervisors, serial gateways, instrument-control boards, and connected industrial sensors. Its 1 MB flash capacity is particularly useful for protocol stacks, diagnostics, boot functions, and application code stored locally. The 100-pin package also provides substantially more I/O and peripheral routing flexibility than a small-outline MCU. The primary design consideration is PCB implementation. A 100-pin TFBGA requires a multilayer board with fine-pitch escape routing, a controlled-impedance stack-up, and careful power and ground distribution. Follow the NXP pin assignment, decoupling, and layout guidance in the manufacturer datasheet, and validate the assembled board for signal integrity and thermal performance before production. This product page combines the manufacturer part information, distributor technical summaries, and cross-reference records with practical guidance for package implementation, peripheral planning, and device selection. The comparisons emphasize which LPC family members remain in the same TFBGA-100 format and where firmware, peripheral, qualification, or lifecycle review is still required before a replacement is approved.

RFQ İletişim
LPC1822JBD144E - 180MHz Cortex-M3 MCU | NXP | LQFP-144
LPC1822JBD144E

LPC1822JBD144E - 180MHz Cortex-M3 MCU | NXP | LQFP-144

The NXP Semiconductors LPC1822JBD144E is a high-performance 32-bit microcontroller based on the Arm Cortex-M3 core, operating at up to 180 MHz and integrating 512 KB of flash memory in a 144-LQFP package measuring 20 mm by 20 mm. The LPC1822JBD144E belongs to the LPC18xx family, which combines a high-frequency processor core with extensive embedded peripherals for demanding control-system designs. A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, peripherals, and interface circuitry into one package. Within the product hierarchy, the LPC1822JBD144E is an Arm Cortex-M3 microcontroller, a 32-bit embedded processor, and a member of the NXP LPC18xx family. This combination makes it suitable for applications requiring deterministic control, high processing throughput, network connectivity, and multiple communication interfaces. Key features include a maximum CPU frequency of 180 MHz, a three-stage Cortex-M3 pipeline, and 512 KB of flash memory. The family also provides a broad set of integrated support blocks for connected embedded systems. According to the NXP product information, the LPC185x, LPC183x, LPC182x, and LPC181x devices operate at CPU frequencies up to 180 MHz and are designed for embedded applications requiring high performance and extensive peripheral integration. The Arm Cortex-M3 architecture provides a balanced combination of performance, efficiency, and deterministic interrupt handling. Its three-stage pipeline supports substantial instruction throughput, while integrated debug features assist development and validation. The large 144-pin LQFP exposes substantially more I/O than small-outline packages, supporting designs that need numerous parallel signals alongside serial communication peripherals. The 20 mm by 20 mm package also remains compatible with conventional leaded assembly and inspection processes. Typical applications include industrial automation equipment, connected industrial controllers, building-control systems, communications infrastructure, robotics, test and measurement instruments, and high-performance embedded gateways. The combination of 180 MHz processing and 512 KB flash supports protocol handling, supervisory control, data acquisition, and real-time control functions. Peripheral selection and pin multiplexing should be checked against the manufacturer's pin description table before finalizing a board design. A primary design consideration is that the 144-pin package requires careful planning of power, ground, signal, and decoupling connections. Place all required decoupling capacitors adjacent to their associated supply pins, preserve the recommended ground layout, and assign every external pin according to the datasheet pin multiplexing matrix. Validate the final design for signal integrity, thermal performance, programming access, and peripheral conflicts. This product record combines the verified NXP family specifications, package information, sourcing links, and application-oriented design guidance. It also identifies what cannot be safely substituted: no pin-to-pin MCU replacement was established because package fit alone does not guarantee matching memory, peripherals, pin multiplexing, and electrical constraints.

RFQ İletişim
LPC1822JET100E - 32-bit Cortex-M3 180MHz MCU | NXP
LPC1822JET100E

LPC1822JET100E - 32-bit Cortex-M3 180MHz MCU | NXP

The NXP LPC1822JET100E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a maximum clock frequency of 180 MHz, 512 KB of embedded flash memory, and a 100-TFBGA package measuring 9 mm by 9 mm. It belongs to the LPC18xx family of embedded microcontrollers, combining a 32-bit processor core, SRAM, connectivity peripherals, and flexible I/O in a compact surface-mount package. The LPC1822JET100E is suited to industrial control, communications, networking, and other embedded systems requiring more processing performance and memory than a basic 8-bit or low-end 32-bit MCU. A microcontroller is a semiconductor integrated device containing a processor core, memory, input/output ports, and peripheral functions on one chip. The ARM Cortex-M3 architecture used by the LPC1822JET100E provides a deterministic execution environment with efficient exception handling and extensive peripheral integration. In the product hierarchy, this device is a 32-bit microcontroller, an embedded processing IC, and a member of the NXP LPC18xx family. The verified distributor information identifies the LPC1822JET100E as an ARM Cortex-M3 MCU operating at up to 180 MHz with 512 KB of flash memory. The 512 KB flash provides room for boot code, application firmware, configuration data, and protocol stacks, while the integrated SRAM supports working memory and data-intensive embedded routines. The 100-TFBGA package exposes a large number of pins for high-speed I/O, communications, storage, and power connections without requiring a large peripheral package. The LPC1822JET100E is intended for embedded designs that need flexible peripheral access and high-speed serial connectivity. Its architecture can support industrial controllers, network-connected equipment, data acquisition systems, and communication gateways. Software development is based on the ARM Cortex-M3 ecosystem, allowing engineers to use compatible C toolchains, debugging tools, and embedded middleware. The NXP product page provides the official data sheet and part information for design decisions. Typical implementation places the microcontroller at the center of a control board, connecting sensors through GPIO and serial interfaces, driving external nonvolatile storage, and communicating through Ethernet, USB, or other available peripherals. Firmware should initialize clocks, pin multiplexing, memory, and only the required peripherals to reduce power consumption and simplify system validation. The exact peripheral configuration, electrical limits, and package pin assignments must be confirmed in the NXP manufacturer datasheet. Designers should verify the 100-TFBGA land pattern, exposed-pad requirements, power rails, decoupling, flash programming, and signal-integrity margins directly against the manufacturer documentation. A 180 MHz processor also requires careful clock, trace, return-path, and electromagnetic-compatibility layout. Because the verified data confirms the core frequency, flash size, package, and function, but does not provide the complete electrical tables, detailed pin map, or pricing tiers, those missing values are explicitly marked rather than inferred. This product page consolidates verified distributor specifications, an official NXP source, package information, selection guidance, and practical design cautions into a single engineering-oriented reference for engineers evaluating the LPC1822JET100E.

RFQ İletişim