Ürünler (46.000+)

LPC4078FBD100 - 120MHz Cortex-M4 MCU 512KB Flash | NXP
LPC4078FBD100

LPC4078FBD100 - 120MHz Cortex-M4 MCU 512KB Flash | NXP

The NXP LPC4078FBD100 is an ARM Cortex-M4 based 32-bit digital signal controller for embedded applications requiring a high level of integration and low power dissipation, delivering 120MHz core performance with 512KB of on-chip flash in a 100-pin LQFP package. Key headline parameters are 120MHz ARM Cortex-M4 core, 512KB flash, 100-LQFP (14x14 mm). An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed by ARM Holdings that combines microcontroller control features with digital signal processing (DSP) capabilities. The Cortex-M4 sits in the broader taxonomy of microcontroller core -> RISC processor -> CPU -> semiconductor IC, and is widely adopted for motor control, audio processing, industrial sensing, and embedded connectivity. The LPC4000 family is NXP's high-integration, low-power DSP controller line. Key features of the LPC4078FBD100 include an M-class Cortex-M4 core with single-precision floating point, 512KB flash, 96KB SRAM, three enhanced I2C interfaces (one Fast-mode Plus supporting 1 Mbit/s), an I2S interface for digital audio input/output, one 8-channel 12-bit ADC, two analog comparators, and a DAC. The device is intended to provide pin function compatibility with the NXP LPC24xx/23xx and LPC178x/7x families, easing migration paths. The architecture pairs a Harvard bus design with a 3-stage pipeline, an internal prefetch unit, and dedicated peripheral bus, allowing deterministic peripheral access at the full 120 MHz clock. The wide peripheral set (USB Host/Device/OTG, Ethernet MAC, CAN, SD card interface, LCD controller, multiple UARTs/SPI/I2C) enables single-chip system designs. Typical applications include industrial automation controllers, building automation HMI panels, point-of-sale terminals, motor control drives, audio recording/playback peripherals, and bridging designs migrating from older LPC23xx/24xx platforms. Per NXP, the LPC408x/7x family is positioned for embedded applications requiring high integration and low power dissipation. When designing with this device, evaluate power-rail decoupling carefully: place 100 nF ceramic capacitors close to every VDD/VSS pair and follow the reference schematic in the NXP LPC407x user manual. Migration from LPC178x/7x to LPC408x/7x is largely pin-compatible, but always re-verify peripheral mapping against the latest errata sheet. This page synthesizes distributor stock and pricing across 9 channels, drop-in alternatives from the LPC407x and LPC408x families, and practical design notes that go beyond what the manufacturer datasheet alone provides.

USD $7,38 Stokta
LPC4078FET208 - 32-bit Arm Cortex-M4 MCU, 512KB Flash | NXP
LPC4078FET208

LPC4078FET208 - 32-bit Arm Cortex-M4 MCU, 512KB Flash | NXP

The NXP LPC4078FET208 is a 32-bit Arm Cortex-M4 digital signal controller for embedded applications requiring high integration and low power dissipation, housed in a 208-pin TFBGA (15x15 mm) package with 512 KB of on-chip Flash and up to 96 KB SRAM. It operates at up to 120 MHz core frequency with a single FPU and DSP extensions, plus an M0 coprocessor for low-latency I/O handling. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and a rich set of on-chip peripherals such as timers, communication interfaces, and analog blocks. Arm Cortex-M4 microcontrollers target deterministic real-time control and signal processing, occupying the mid-performance tier between Cortex-M0/M3 microcontrollers and Cortex-M7 high-end parts. The LPC407x family extends the Cortex-M4 lineage with NXP's familiar LPC peripheral set (EMC, Ethernet, USB, CAN, SPIFI) aimed at industrial communication, motor control, and human-machine interface designs. Key features include 512 KB Flash with in-system programming, 96 KB SRAM plus 4 KB EEPROM emulation, a 10/100 Ethernet MAC, two USB 2.0 controllers (Host/Device/OTG and Device/Host), two CAN 2.0B controllers, four UARTs, three enhanced I2C-bus interfaces (one Fast-mode Plus up to 1 Mbit/s), three SSP/SPI controllers, an I2S audio interface, an external memory controller (EMC) supporting SRAM, NOR Flash, and SDRAM, and a Quad-SPI Flash Interface (SPIFI) for high-speed off-chip code execution. An 8-channel 10-bit ADC and a 10-bit DAC support mixed-signal feedback, while four timers plus a PWM/Motor Control PWM unit handle power-conversion and motor drive tasks. The part supports 1.8 V to 3.6 V single-supply operation with brownout detect and on-chip power profiles. The architecture combines the Cortex-M4 main core with an Arm Cortex-M0 coprocessor that offloads I/O servicing through shared peripherals, reducing interrupt latency for time-critical peripherals such as Ethernet, USB, and CAN. The 4 KB EEPROM and 96 KB SRAM are large enough to host full TCP/IP stacks, USB device classes, and graphical user interface libraries without external memory; the EMC and SPIFI extend code space if needed. JTAG, SWD, and the on-chip ROM bootloader (UART, USB, SPI) cover in-field firmware updates. Typical applications include industrial Ethernet gateways, motor control (BLDC and stepper drives), building automation and HVAC controllers, point-of-sale terminals, USB peripherals, and human-machine interface panels with TFT LCD support. The 208-ball TFBGA exposes a wide external bus and the full peripheral set, fitting designs that need Ethernet plus USB plus CAN in one package. When designing with this part, allocate decoupling capacitors near each VDD/VSS pair and keep the TFBGA break-out on inner layers for signal integrity. Plan the boot mode straps (ISP, USB-CRC for the 4078/4088 parts) carefully if your firmware will boot from external SPIFI rather than internal flash. Use NXP's LPC407x CMSIS-pack and the LPCXpresso / MCUXpresso IDE for driver support and example peripheral initialization. This page synthesizes distributor pricing, drop-in alternative candidates, and practical design notes not found in a single manufacturer datasheet, providing an engineer-ready overview of the LPC4078FET208 in seconds.

RFQ İletişim
LPC4088FBD144 - ARM Cortex-M4 MCU 120MHz 512KB | NXP
LPC4088FBD144

LPC4088FBD144 - ARM Cortex-M4 MCU 120MHz 512KB | NXP

The NXP Semiconductors LPC4088FBD144 is an ARM Cortex-M4F digital signal controller running at 120 MHz, integrating 512 KB of on-chip flash and 96 KB SRAM in a 144-pin LQFP (20x20 mm) package. According to the NXP product page, the device targets embedded applications requiring a high level of integration and low power dissipation, including those needing USB, Ethernet, an LCD interface, EMC, and SPIFI for external memory expansion. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed for deterministic embedded control, featuring a single-precision floating-point unit, DSP extensions via SIMD instructions, a Nested Vectored Interrupt Controller, and tightly-coupled memory for low-latency code execution. Within the broader taxonomy, the LPC4088 belongs to the Cortex-M4 family -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The M4F variant specifically adds hardware floating-point math, distinguishing it from the M0/M0+/M3 families that lack FPU support. Key features of the LPC4088FBD144 include a 120 MHz maximum CPU clock, 512 KB flash program memory, 96 KB SRAM, an 8-channel GPDMA controller, USB 2.0 full-speed and high-speed OTG with on-chip PHY, 10/100 Ethernet MAC, an LCD controller supporting STN and TFT panels up to 1024x768, two CAN 2.0B controllers, four UARTs, three SSP/SPI peripherals, an I2C bus interface, a 10-bit ADC with 8 channels, a 10-bit DAC, PWM/timer subsystems, an EMC external memory controller, and a SPIFI quad-SPI flash interface. The 144-pin LQFP provides 5 V-tolerant GPIO and a wide operating temperature range suitable for industrial environments. Architecturally, the LPC4088 integrates the Cortex-M4 core with NXP's peripheral subsystem, offering deterministic interrupt latency under 12 cycles and a low-power sleep mode that retains SRAM while dropping core clocks. The high-speed USB, Ethernet, and LCD controller are enabled simultaneously, supported by a multi-layer AHB bus matrix that prevents peripheral contention. Typical applications include industrial control with HMI touchscreens, building automation gateways, point-of-sale terminals, USB audio devices, embedded data loggers, and motor control with CAN. The 512 KB flash and 96 KB SRAM comfortably support a real-time OS such as FreeRTOS with USB and TCP/IP stacks. When designing with the LPC4088, ensure the SPIFI pins are not remapped when external Quad-SPI flash is in use, and provision decoupling capacitors within 5 mm of each VDD/VSS pair. JTAG/SWD traces should be length-matched to within 25 mm to preserve debug clock integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single distributor listing, helping engineers compare the LPC4088 against same-package NXP variants and cross-brand Cortex-M4 replacements.

RFQ İletişim
LPC4310FBD144 - 204MHz Dual-Core Cortex-M4/M0 | NXP
LPC4310FBD144

LPC4310FBD144 - 204MHz Dual-Core Cortex-M4/M0 | NXP

The NXP Semiconductors LPC4310FBD144 is a 32-bit dual-core microcontroller combining an Arm Cortex-M4 digital signal controller with an Arm Cortex-M0 coprocessor at up to 204 MHz. It is a ROMless device with 168 kB of SRAM and is packaged in a 144-pin LQFP measuring 20 mm by 20 mm. Its combination of high-frequency signal-processing capability, a coprocessor, and extensive serial and communications peripherals makes it suitable for embedded systems that divide control, monitoring, and signal-processing work between two processor cores. A dual-core microcontroller is an integrated circuit containing two independently programmable processor cores within one package. The Cortex-M4 core is optimized for compact embedded control and digital signal processing, while the Cortex-M0 core can handle lower-complexity tasks, peripheral servicing, or background operations. This architecture reduces the need for separate companion controllers when the system must coordinate deterministic control functions with higher-throughput signal processing. Key LPC4310 features include 168 kB of SRAM, a maximum listed operating frequency of 204 MHz, CAN connectivity, AES cryptographic hardware, SPIFI support, SGPIO, and SCT. The ROMless configuration requires the application program to be stored in external nonvolatile memory, allowing firmware, code, and boot images to be upgraded independently of the microcontroller package. The 144-LQFP package also provides a large pin count for external memory, communications, and control interfaces. The LPC4310FBD144 belongs to NXP's LPC43xx family of mixed-signal and digital signal controllers. Its Cortex-M4/M0 architecture supports concurrent software tasks, while the Cortex-M4 main core addresses applications requiring faster arithmetic and signal-processing performance. The external-memory interface and ROMless design add board-level flexibility but require careful initialization of the external memory device before the application code can execute. Typical uses include industrial signal-processing equipment, communications controllers, motor-control platforms, data-acquisition systems, and embedded products requiring CAN plus secure serial connectivity. The microcontroller can coordinate sensors and actuators through its mixed-signal peripherals while the M0 coprocessor supports low-latency peripheral servicing. Its 204 MHz Cortex-M4 core is particularly useful for filtering, control-loop execution, and protocol processing. Designers should allocate the external memory interface according to the NXP pin description and memory-device timing requirements, and should isolate high-speed communications and switching nodes to prevent unwanted coupling. Firmware must provide the boot and configuration sequence required for ROMless operation. Decoupling, grounding, signal integrity, and unused-pin decisions should be reviewed against the manufacturer datasheet and the selected external memory implementation. This product page consolidates the core LPC4310FBD144 identifiers, package information, architectural features, sourcing workflow, and design-oriented guidance. It is intended to help engineers quickly establish whether this dual-core MCU matches their memory, connectivity, signal-processing, and 144-pin packaging requirements before beginning board-level design.

RFQ İletişim
LPC4310FET100 - Dual-Core 204 MHz MCU with USB | NXP
LPC4310FET100

LPC4310FET100 - Dual-Core 204 MHz MCU with USB | NXP

The NXP Semiconductors LPC4310FET100 is a 32-bit Arm Cortex-M4/M0 digital signal controller with up to 204 MHz processing performance, up to 264 kB of SRAM, Ethernet, two high-speed USB interfaces, and advanced configurable peripherals, housed in a 100-TFBGA package. It operates from a 2.2 V to 3.6 V supply and provides 83 I/O ports according to the supplied distributor data. A digital signal controller is a microcontroller architecture optimized for real-time control, communications, and signal-processing workloads. Within the embedded-semiconductor hierarchy, the LPC4310 combines an Arm Cortex-M4 main processor with an Arm Cortex-M0 coprocessor: the Cortex-M4 handles demanding control and DSP tasks, while the Cortex-M0 can manage independent peripheral operations. This division can reduce main-core interruption overhead in tightly timed systems. Key verified features include a 32-bit data bus, dual-core Arm Cortex-M4/M0 processing, up to 264 kB SRAM, Ethernet connectivity, and two high-speed USB ports. The 100-TFBGA package supports a high pin count in a compact 9 x 9 mm footprint, although its fine pitch requires careful PCB layout, assembly inspection, and multilayer board construction. The device targets embedded applications requiring signal processing and connected control. Its combination of Ethernet and dual USB connectivity makes it relevant to industrial gateways, data-acquisition controllers, USB-to-Ethernet bridges, and networked embedded monitoring systems. Its exact flash-memory organization, peripheral pin assignments, and operating-temperature limits were not supplied in the verified dataset and should be confirmed from NXP's technical documentation before design release. A key integration consideration is firmware partitioning between the two Arm cores. Developers should define ownership and synchronization rules for shared memory, interrupts, clocks, DMA channels, and peripherals early in the architecture. Firmware migration also requires validating startup code, linker placement, device drivers, and boot behavior rather than assuming that a higher-speed MCU is automatically software-compatible with another device. For a new design, verify the exact package ball map, external component requirements, Ethernet PHY interface, USB routing, and power sequencing against the official NXP documentation. Because the LPC4310FET100 is ROMless according to the distributor result, its application also depends on a suitable external program-memory implementation where required by the selected system configuration. This product page consolidates verified supplier information, package constraints, application guidance, and procurement data that are not normally presented together in a distributor listing. It also distinguishes verified facts from parameters that remain unavailable, helping engineers assess fit before requesting a quote or committing to PCB fabrication.

RFQ İletişim
LPC4312JBD144E - 204MHz Dual-Core MCU | NXP | LQFP-144
LPC4312JBD144E

LPC4312JBD144E - 204MHz Dual-Core MCU | NXP | LQFP-144

NXP Semiconductors LPC4312JBD144E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller operating at up to 204 MHz, with 512 kB of flash and 136 kB of SRAM in a 144-pin LQFP package. It combines a high-performance Cortex-M4 core with a Cortex-M0 coprocessor and integrates Ethernet, two high-speed USB interfaces, LCD support, EMC peripherals, a quad SPI Flash Interface, and configurable timer and serial GPIO resources. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device for embedded control. The Cortex-M4 main core handles application code, networking, and USB tasks, while the Cortex-M0 coprocessor can execute dedicated control or peripheral-service routines. Within the device hierarchy, the LPC4312JBD144E is an Arm Cortex-M4/M0 MCU, an embedded microcontroller, and a member of the NXP LPC4300 family of 32-bit embedded processors. The 204 MHz Cortex-M4 core supports demanding embedded workloads, while the 512 kB flash provides nonvolatile program storage and the 136 kB SRAM supports working data, Ethernet buffers, display interfaces, and USB communications. Dual high-speed USB controllers are useful for systems requiring multiple USB device or host functions, while Ethernet supports connected industrial, communications, and control products. The integrated LCD and EMC resources reduce the need for some external peripherals. The LPC4300 family adds a Cortex-M0 coprocessor to the Cortex-M4 architecture. This arrangement allows the main core and coprocessor to execute separate tasks, which can improve responsiveness in interrupt-driven systems. The quad SPI Flash Interface provides a dedicated route to external serial flash for firmware expansion, graphics assets, data logging, or configuration storage. The State Configurable Timer and Serial General Purpose I/O interface extend timer and signal-routing flexibility for industrial and communications equipment. Typical applications include Ethernet-connected industrial controllers, USB-to-Ethernet data acquisition equipment, human-machine interface systems with LCD displays, communications infrastructure, and embedded gateways. The 144-pin LQFP package provides access to a broad set of high-speed and general-purpose I/O while remaining compatible with conventional board-assembly and inspection processes. Designers should verify clock, power, decoupling, USB, Ethernet, and display requirements against the manufacturer datasheet and user reference manual. The dual-core architecture also requires careful startup and interrupt-vector configuration so the main processor and coprocessor operate in the intended sequence. PCB layout should preserve short high-speed traces and provide appropriate return paths beneath Ethernet and USB interfaces. This product page combines exact NXP family and device specifications with package information, application guidance, comparison points, and drop-in alternatives identified from technical cross-references. It is intended to help engineers evaluate processor performance, memory capacity, peripheral integration, and PCB reuse before selecting the LPC4312JBD144E for an embedded design.

RFQ İletişim
LPC4312JET100E - 204MHz Dual-Core MCU | NXP | 100-TFBGA
LPC4312JET100E

LPC4312JET100E - 204MHz Dual-Core MCU | NXP | 100-TFBGA

The NXP Semiconductors LPC4312JET100E is a 32-bit dual-core embedded microcontroller based on an Arm Cortex-M4 processor with an Arm Cortex-M0 coprocessor, operating up to 204 MHz and providing 512 KB of flash memory and 136 KB of on-chip SRAM in a 100-TFBGA package measuring 9 mm by 9 mm. The part also includes an Ethernet controller, two high-speed USB interfaces, LCD support, and a quad SPI Flash Interface for embedded applications requiring extensive connectivity. A microcontroller is an integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The LPC43xx family belongs to the Arm Cortex-M microcontroller hierarchy, where the Cortex-M4 core handles primary control and signal-processing tasks while the Cortex-M0 coprocessor can offload suitable background tasks. Ethernet, high-speed USB, LCD, and SPI Flash connectivity place the device between a general-purpose microcontroller and a more highly integrated communications processor. The verified product information identifies a 512 KB flash configuration, 136 KB of on-chip SRAM, and 16 KB of EEPROM for the LPC435x/3x/2x/1x family. Its quad SPI Flash Interface supports external serial-memory expansion, while Ethernet and two high-speed USB interfaces reduce the need for separate communication controllers. The 100-TFBGA package provides 100 terminals on a compact 9 mm by 9 mm surface-mount footprint suitable for compact industrial and communications equipment. The device combines a 204 MHz Cortex-M4 core with a Cortex-M0 coprocessor in one package. This heterogeneous arrangement can separate interrupt-intensive or peripheral-oriented work from the main control loop without requiring a second discrete microcontroller. Exact core frequencies, cache organization, and coprocessor performance allocation are not included in the supplied verified data, so those details should be confirmed in the manufacturer documentation before workload partitioning is finalized. Typical uses include industrial Ethernet equipment, USB-enabled embedded controllers, human-machine-interface systems with LCD connectivity, and designs requiring external SPI Flash storage. The Ethernet controller and dual high-speed USB support are particularly useful for connected data-acquisition, communications, and monitoring products. A design can also use the quad SPI Flash Interface to retain firmware, configuration, logs, or graphical assets outside the internal 512 KB flash. PCB planning must account for the fine-pitch 100-TFBGA land pattern, multilayer escape routing, power and ground distribution, and thermal management. Firmware selection should also verify boot, memory-map, peripheral, pin-muxing, and debugger requirements rather than assuming that software built for another LPC43xx member is interchangeable. Exact operating-temperature, voltage, and package-performance limits were not supplied and require confirmation from the NXP datasheet. This product record combines verified manufacturer and distributor information, an explicit treatment of missing electrical data, connectivity-focused application guidance, and pin-compatible same-family alternatives. It is intended to support engineering selection and sourcing decisions without presenting unverified specifications as guaranteed production facts.

RFQ İletişim
LPC4313JBD144551 - 204MHz Dual-Core MCU | NXP | Industrial
LPC4313JBD144551

LPC4313JBD144551 - 204MHz Dual-Core MCU | NXP | Industrial

NXP Semiconductors LPC4313JBD144551 is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller operating at 204 MHz, with 512 KB of embedded flash in a 144-pin LQFP package measuring 20 x 20 mm. The device is designed for embedded applications requiring real-time processing, connected communications, and configurable peripheral control. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, communication interfaces, timers, and general-purpose I/O. In the hierarchy of semiconductor devices, the LPC4313 is a 32-bit MCU based on the Arm Cortex-M4/M0 architecture. The Cortex-M4 core handles performance-sensitive control tasks, while the Cortex-M0 core can manage peripheral operations, communications, or other background work through NXP's dual-core architecture. The LPC4313 family supports Ethernet, two high-speed USB interfaces, LCD connectivity, and electromagnetic-compatibility features. Its configurable peripherals include the State Configurable Timer, or SCT, and Serial General Purpose I/O, or SGPIO. A quad SPI Flash Interface, or SPIFI, provides an external serial-memory path when internal storage is insufficient. These resources make the MCU suitable for connected industrial controls, human-machine interfaces, and embedded gateways. Memory integration is a major advantage for compact embedded systems. The LPC4313JBD144551 contains 512 KB of flash, while the broader LPC43xx family can reach 1 MB of flash and 136 kB of SRAM. The family also provides 16 kB of EEPROM for data that must survive power loss. Depending on the selected device variant, on-chip SRAM and other memory resources support firmware, working buffers, protocol stacks, and graphics without requiring an external memory bus for every design. Typical applications include industrial Ethernet bridges, USB-to-serial gateways, programmable logic controllers, motor and motion-control equipment, data acquisition systems, and LCD-equipped operator panels. The Cortex-M4/M0 combination is useful when control-loop work must remain deterministic while a second core handles communications or I/O. Its 2.2 V to 3.6 V operating range also supports common 3.3 V embedded systems when the printed circuit board supplies the required voltage accurately. PCB design should preserve the integrity of the 3.3 V rail, high-speed communications, clocks, and ground returns. Place decoupling capacitors close to the supply pins, route sensitive signals away from switching nodes, and follow the NXP package and reference-layout guidance. The LQFP-144 footprint requires careful fan-out because its 144 leads provide extensive mixed-signal, communication, and control connectivity. This product record combines manufacturer-family specifications, orderable-package information, sourcing guidance, application-fit analysis, and drop-in replacement considerations. It also identifies the engineering details that must be checked in the LPC43xx datasheet before firmware, pin assignment, memory use, and PCB release.

RFQ İletişim
LPC4313JBD144E - Dual-Core 204 MHz MCU | NXP | Industrial
LPC4313JBD144E

LPC4313JBD144E - Dual-Core 204 MHz MCU | NXP | Industrial

The NXP Semiconductors LPC4313JBD144E is a dual-core 32-bit microcontroller combining an Arm Cortex-M4 processor and an Arm Cortex-M0 coprocessor at up to 204 MHz, with 512 KB of flash memory and 136 kB of SRAM in a 144-LQFP package. The device also includes Ethernet, two high-speed USB interfaces, LCD support, and a broad collection of configurable peripherals for connected embedded systems. An Arm Cortex-M4/M0 microcontroller is an embedded processor architecture that pairs a high-performance Cortex-M4 core with a lower-power Cortex-M0 coprocessor. Within the product hierarchy, the LPC4313JBD144E belongs to the LPC4300 microcontroller family, combines real-time control with communications processing, and falls under the broader categories of embedded processors, 32-bit microcontrollers, and semiconductor devices. The principal features verified for this device include a 204 MHz operating frequency, 512 KB of internal flash, 136 kB of on-chip SRAM, 16 kB of EEPROM, Ethernet, two high-speed USB interfaces, LCD connectivity, and an Arm Cortex-M0 coprocessor. These resources support firmware-intensive control systems, human-machine interfaces, data acquisition, and USB- or Ethernet-connected equipment without requiring external flash for typical application firmware. Architecturally, the Cortex-M4 core handles the main real-time workload while the Cortex-M0 coprocessor can execute independent peripheral-control or monitoring tasks. The LPC4300 family includes the State Configurable Timer, Serial General Purpose I/O interface, and quad SPI Flash Interface, allowing designers to combine conventional fixed peripherals with event-based timing and serial GPIO functions. Typical uses include industrial Ethernet controllers, USB-to-Ethernet gateways, programmable automation equipment, medical monitoring systems, LCD-based human-machine interfaces, and embedded data-logging platforms. Its 144-LQFP package provides a large pin count for simultaneous Ethernet, USB, display, timer, and serial connectivity requirements. The primary design consideration is PCB and firmware complexity: a 144-pin LQFP requires careful escape routing, while Ethernet and USB interfaces require compliant layout, controlled-clock planning, correct termination, and validated signal integrity. Software must also reserve and initialize the M4 and M0 cores according to the manufacturer startup procedure. This page consolidates verified distributor and manufacturer information, distinguishes the directly identified same-package LPC4312JBD144E alternative, and provides application guidance and design cautions beyond a basic distributor listing. Availability, lifecycle status, and detailed electrical limits should be confirmed against current NXP documentation before production release.

RFQ İletişim
LPC4313JET100551 - Dual-Core 204 MHz MCU | NXP
LPC4313JET100551

LPC4313JET100551 - Dual-Core 204 MHz MCU | NXP

NXP Semiconductors LPC4313JET100551 is a dual-core ARM Cortex-M4/M0 microcontroller rated at up to 204 MHz, with 512 KB of embedded flash memory, and supplied in a 100-ball TFBGA package measuring 9 mm by 9 mm. The device combines an Arm Cortex-M4 application processor with an Arm Cortex-M0 coprocessor in one package, providing dedicated real-time control alongside a higher-performance main core. A dual-core microcontroller is an embedded processing device in which two independent processor cores share a package and memory system but can execute different tasks. The Cortex-M4 core handles operating systems, communications, and application processing, while the Cortex-M0 coprocessor can support deterministic peripheral control, state-machine workloads, or signal-processing tasks. This arrangement improves concurrency without requiring two discrete microcontrollers on the board. The LPC4313JET100551 provides 204 MHz processing performance, 512 KB of flash storage, and up to 136 kB of on-chip SRAM according to the NXP LPC435x/3x/2x/1x family description. Its peripherals include a configurable State Configurable Timer, Serial General Purpose I/O interface, quad SPI Flash Interface, Ethernet-capable high-speed interfaces, and an Arm Cortex-M0 coprocessor. These resources suit connected industrial, communications, and embedded control systems that need both performance and deterministic I/O handling. The architecture separates supervisory and real-time workloads across the Cortex-M4 and Cortex-M0 cores. Firmware can assign communication protocols, protocol stacks, or application logic to the main core while assigning time-critical sampling and control routines to the coprocessor. Inter-core synchronization and peripheral access must still be designed carefully, because the cores do not remove the need for deterministic interrupt and memory-access planning. Typical uses include industrial gateways, motor and motion-control systems, network-connected embedded equipment, data acquisition units, and communication infrastructure. The 204 MHz Cortex-M4 core supports responsive protocol handling and control logic, while the Cortex-M0 core can reduce the latency burden of repetitive peripheral tasks. The 100-TFBGA package also favors compact, multilayer PCB designs where ball pitch and escape routing require deliberate layout planning. For a new PCB, use the NXP pin-description table and recommended power, decoupling, clock, and ground connections when assigning the 100-ball footprint. Because the complete BGA pin assignment is not reproduced on this page, verify every ball location and power boundary against the manufacturer documentation before fabrication. Production software should also confirm device revision, peripheral availability, bootloader configuration, and the exact ordering suffix. This page combines the manufacturer family architecture, exact LPC4313JET100551 commercial identifiers, same-package replacement analysis, and practical implementation guidance. It also distinguishes the target ordering code from related NXP LPC43xx variants so engineers can evaluate replacement risk before committing to a board spin.

RFQ İletişim
LPC4313JET100E - Dual-Core 204 MHz MCU | NXP
LPC4313JET100E

LPC4313JET100E - Dual-Core 204 MHz MCU | NXP

NXP Semiconductors LPC4313JET100E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller with a 204 MHz processor, 512 KB of embedded flash, 136 KB of SRAM, Ethernet, two high-speed USB interfaces, LCD support, and EMC in a 100-ball TFBGA package measuring 9 mm by 9 mm. The Cortex-M4 core handles performance-intensive processing while the energy-efficient Cortex-M0 coprocessor supports control-oriented workloads. A microcontroller is a programmable integrated circuit containing a processor core, memory, and peripherals on one package. In the embedded-device hierarchy, the LPC4313JET100E belongs to the Arm Cortex-M MCU family and combines general-purpose control, communications connectivity, and real-time peripheral support. Its dual-core architecture can separate application code, communications handling, and background tasks without requiring a separate controller. The NXP product page highlights 512 KB of flash, 136 KB of SRAM, Ethernet, two high-speed USB ports, LCD connectivity, and EMC features. The Cortex-M0 coprocessor is code- and tool-compatible upward with the Cortex-M4 core and can reach 204 MHz, making it useful for transferring selected tasks away from the main core. The family also includes configurable timers, SGPIO, and a quad SPI Flash Interface for external memory and storage expansion. The LPC43xx architecture is designed for embedded systems requiring more connectivity and parallel processing than a basic microcontroller. Ethernet and dual high-speed USB support reduce the need for external communication controllers in gateways, industrial equipment, human-machine interfaces, and connected control systems. The 100-ball TFBGA-100 package also supports dense routing of the high-speed and display interfaces, although its fine pitch requires careful PCB layout and inspection. Typical applications include industrial Ethernet controllers, USB-connected data acquisition equipment, human-machine interface panels, communications gateways, and embedded motor-control systems. The principal design advantage is flexible workload allocation between the Cortex-M4 and Cortex-M0 cores, while the principal integration challenge is laying out a 9 mm by 9 mm ball-grid-array footprint with controlled power, clock, and high-speed signal routing. Use the NXP pin-description table and reference schematic when assigning PCB tracks and power domains. Place decoupling capacitors close to the supply balls, route Ethernet and USB differential pairs as controlled-impedance nets, and validate the Cortex-M4 and Cortex-M0 clock, reset, and boot configuration before committing the layout. This page consolidates the key NXP product characteristics, drop-in family alternatives, application guidance, package considerations, and design checks needed to evaluate the LPC4313JET100E for an embedded system.

RFQ İletişim
LPC4315JBD144551 - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP
LPC4315JBD144551

LPC4315JBD144551 - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP

The NXP LPC4315JBD144551 is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller operating up to 204 MHz, with 768 KB of embedded flash, 136 KB of on-chip SRAM, and a 144-pin LQFP package measuring 20 x 20 mm. It combines an Arm Cortex-M4 application core with an Arm Cortex-M0 coprocessor for parallel peripheral servicing, while retaining Ethernet, USB, and high-speed serial connectivity for embedded networking designs. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, communication controllers, and interrupt controllers. Within the broader hierarchy, this device belongs to the embedded processor and microcontroller class, combining real-time control capability with extensive serial networking interfaces. The dual-core architecture allows the M0 core to handle deterministic background tasks while the M4 core executes application code. The LPC4315JBD144551 provides 768 KB of flash for firmware, 136 KB of SRAM for working data, and up to 16 KB of EEPROM within the LPC43xx family. Its advanced peripherals include Ethernet, two high-speed USB interfaces, a quad SPI Flash Interface, the State Configurable Timer, and SGPIO. These resources support gateways, industrial controllers, data acquisition systems, USB peripherals, and connected embedded equipment without requiring a separate Ethernet or USB controller. Architecturally, the M4 core handles complex control logic while the M0 coprocessor can offload peripheral servicing and reduce interrupt latency on the main core. The family supports extensive programmable peripherals, allowing pin and timer functions to be routed more flexibly than on a fixed-function microcontroller. The 144-LQFP package provides a large peripheral complement and adequate pin count for multi-interface industrial boards. Typical applications include industrial Ethernet bridges, USB-to-Ethernet equipment, factory data concentrators, building automation controllers, and test-and-measurement instruments. For designs where deterministic peripheral servicing matters, the independent M0 core can execute tasks alongside the 204 MHz M4 core. The operating temperature range of -40°C to +105°C supports industrial environments, although final product qualification should cover the complete thermal envelope. Design the PCB with short, controlled-length routes from the 144-LQFP leads and provide the complete set of decoupling capacitors specified by NXP. Confirm peripheral multiplexing, power rails, clock configuration, and package thermal performance against the manufacturer datasheet before release. Treat the LPC43xx errata material as part of the firmware qualification process, because peripheral behavior may depend on the silicon revision. This page organizes the LPC4315JBD144551 specifications, sourcing information, package details, and same-family alternatives into one engineering reference. It also adds design guidance, application fit analysis, and a parameter-by-parameter comparison to support sourcing and design decisions beyond the basic manufacturer product listing.

RFQ İletişim
LPC4315JBD144E - Dual-Core 204MHz ARM MCU | NXP
LPC4315JBD144E

LPC4315JBD144E - Dual-Core 204MHz ARM MCU | NXP

NXP Semiconductors LPC4315JBD144E is a 32-bit dual-core microcontroller built around an Arm Cortex-M4 processor operating up to 204 MHz with an Arm Cortex-M0 coprocessor. The device provides 768 KB of flash memory and is packaged in a 144-pin LQFP measuring 20 mm by 20 mm. Its combination of Ethernet, two high-speed USB interfaces, LCD support, and configurable peripherals targets industrial embedded systems that require substantial connectivity and real-time control in one device. An Arm Cortex-M4/M0 microcontroller is a type of 32-bit microcontroller, itself part of the embedded processor and embedded systems hierarchy. The Cortex-M4 core handles performance-oriented control, communications, and signal-processing tasks, while the Cortex-M0 coprocessor can service peripheral operations independently. This division can reduce interrupt-related load on the primary core and supports deterministic multi-peripheral designs without requiring a separate controller. The LPC4315JBD144E combines 768 KB of flash with the LPC43x family capacity of up to 1 MB, 136 kB of on-chip SRAM, and 16 kB of EEPROM. Peripherals include Ethernet, two high-speed USB ports, an LCD interface, a quad SPI Flash Interface, the State Configurable Timer, and Serial General Purpose I/O. These resources make the microcontroller suitable for gateways, human-machine interfaces, data acquisition equipment, and connected industrial controllers. The dual-core architecture provides a practical way to partition control and communication workloads. The primary Cortex-M4 core can execute application logic and higher-bandwidth network routines, while the Cortex-M0 core can handle auxiliary I/O or peripheral tasks. The exact clock, voltage, timing, peripheral-enable, and temperature details for each device variant must be confirmed in the NXP manufacturer datasheet before final firmware and hardware configuration. Typical uses include Ethernet-connected industrial equipment, USB-to-serial data acquisition systems, LCD-equipped operator panels, SPI Flash update systems, and embedded gateways. The 144-LQFP package exposes substantially more I/O than smaller microcontroller packages, making the device appropriate for designs requiring multiple buses, parallel LCD data, Ethernet connectivity, and USB host or device functions. Designers should allocate the pin multiplexing, clocks, power rails, and boot options from the device-specific pin table before PCB routing. Firmware must also account for separate Cortex-M4 and Cortex-M0 startup and peripheral ownership. Use the manufacturer datasheet for the exact pin names and boot configuration, and validate the PCB against the selected package and revision. This product page combines the manufacturer overview, distributor identification, package information, application guidance, and same-family replacement analysis into an engineering-focused reference. It highlights the role of the Cortex-M4/M0 architecture, memory resources, connectivity peripherals, PCB considerations, and qualification steps that raw distributor listings do not explain.

RFQ İletişim
LPC4315JET100551 - 204MHz Dual-Core MCU | NXP Semiconductors
LPC4315JET100551

LPC4315JET100551 - 204MHz Dual-Core MCU | NXP Semiconductors

NXP Semiconductors LPC4315JET100551 is a 32-bit dual-core microcontroller built around Arm Cortex-M4 and Cortex-M0 processor cores. It operates up to 204 MHz, includes 768 KB of flash memory and 16 kB of EEPROM, and supports a 2.2 V to 3.6 V supply range. The device is packaged in a 100-ball TFBGA package measuring 9 mm by 9 mm for high-density embedded and industrial designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, and digital I/O into one device. The LPC4315 belongs to the LPC43xx family, which combines a high-performance Cortex-M4 core with a Cortex-M0 coprocessor. This architecture belongs to the embedded microcontroller hierarchy and is intended to execute control logic, manage communications, and supervise peripheral functions within a compact embedded system. Key device features include dual-core operation, 768 KB of flash, up to 136 kB of on-chip SRAM for the broader LPC43xx family, 16 kB of EEPROM, and a quad SPI Flash Interface. Advanced peripherals include the State Configurable Timer, Serial General Purpose I/O interface, Ethernet, USB, and high-speed serial interfaces. The 10-bit ADC and operating range of 2.2 V to 3.6 V make the device suitable for mixed-signal industrial control, networking, and embedded communication systems. The Cortex-M4 core handles application code and demanding control tasks, while the Cortex-M0 core can offload lower-level or communication-related work. The 204 MHz maximum clock speed provides useful processing headroom for protocol handling, state machines, data acquisition, and supervisory control. Peripheral integration reduces the number of discrete devices required when a design needs multiple serial interfaces, event counting, GPIO expansion, or external flash connectivity. Typical uses include industrial monitoring, building and factory automation, network-connected embedded controllers, sensor acquisition systems, and communications equipment. In these applications, the microcontroller can combine real-time control with Ethernet or USB connectivity while using its ADC and configurable peripherals to interface with sensors, relays, actuators, and human-interface electronics. The 100-TFBGA package also supports compact boards where a large number of signal connections and fine routing are required. PCB implementation requires careful BGA-layout discipline because the 100-ball package provides limited pitch and exposes many signals in a small 9 mm by 9 mm footprint. Follow the NXP land pattern, route high-speed differential signals as a controlled-length group, and provide continuous supply planes with local high-frequency decoupling. Confirm the exact pin assignments, exposed connections, and board requirements against the manufacturer documentation before release. This product record combines the exact LPC4315JET100551 ordering designation with package, processor, memory, voltage, interface, and sourcing information. It also organizes same-package replacement options and engineering guidance so that designers can assess mechanical compatibility, firmware implications, and supply-chain alternatives before committing a high-density PCB layout.

RFQ İletişim
LPC4315JET100E - 204MHz Dual-Core MCU | NXP | TFBGA-100
LPC4315JET100E

LPC4315JET100E - 204MHz Dual-Core MCU | NXP | TFBGA-100

NXP Semiconductors LPC4315JET100E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller rated at 204 MHz, with 768 KB of flash memory and a 100-ball TFBGA package measuring 9 x 9 mm. The LPC4315JET100E combines an Arm Cortex-M4 microcontroller core with an Arm Cortex-M0 coprocessor, making it suitable for embedded applications that require control processing alongside dedicated peripheral or real-time tasks. Its integrated memory resources include 768 KB flash, while the LPC43xx family is also described with up to 1 MB of family-level flash, 136 kB of on-chip SRAM, and 16 kB of EEPROM. The device uses a 3.3 V supply according to distributor product information. The LPC4300 family architecture is built around Arm Cortex-M4 based microcontrollers with an Arm Cortex-M0 coprocessor. This dual-core arrangement can separate interrupt-heavy control functions from background processing without requiring two independent devices. The family includes a quad SPI Flash Interface, or SPIFI, for high-speed serial flash access, along with configurable peripherals such as the State Configurable Timer and Serial General Purpose I/O interface. These resources support designs requiring deterministic timing, flexible signal routing, high-speed external memory, and multiple communication tasks. The 100-TFBGA package provides a compact surface-mount footprint for industrial embedded equipment, data acquisition systems, communications controllers, and real-time monitoring platforms. The industrial temperature grade and 3.3 V operating supply identify the part for embedded applications where a robust mixed-signal control platform and deterministic peripheral handling are required. The LPC4315JET100E is suited to applications using the Arm Cortex-M4 ecosystem, including embedded software development, connected control systems, industrial automation, and communication equipment. When designing a PCB around the LPC4315JET100E, use the manufacturer package drawing and land pattern for the 100-ball TFBGA rather than relying on a generic BGA footprint. Pay particular attention to power-supply decoupling, exposed routing requirements, clock configuration, reset behavior, and the allocation of communication and general-purpose I/O pins. Firmware should take advantage of the M4 core for application processing and the M0 coprocessor for delegated tasks where deterministic response is important. This product page consolidates the manufacturer description, distributor specifications, package information, and practical selection considerations into a single engineering reference. For an exact pin assignment, ball map, memory map, electrical limits, and peripheral configuration, consult the NXP LPC4315JET100 product page and the corresponding LPC43xx microcontroller datasheet before finalizing PCB routing or firmware.

RFQ İletişim
LPC4317JBD144E - Dual-Core 204MHz MCU | NXP
LPC4317JBD144E

LPC4317JBD144E - Dual-Core 204MHz MCU | NXP

The NXP Semiconductors LPC4317JBD144E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller operating up to 204 MHz, with 1 MB of flash memory, 136 kB of SRAM, and a 144-LQFP package measuring 20 mm by 20 mm. It integrates Ethernet, two high-speed USB interfaces, LCD support, and EMC resources for connected embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The LPC43xx family belongs to the embedded-processing hierarchy: Arm Cortex-M core, 32-bit microcontroller, embedded processor, and system-on-chip. The principal Cortex-M4 core handles application processing, while the Cortex-M0 coprocessor can support peripheral control, data movement, or deterministic background tasks. Key resources include 1 MB of flash, 136 kB of on-chip SRAM, and 16 kB of EEPROM. The part also provides a quad SPI Flash Interface, or SPIFI, for external serial flash, together with the State Configurable Timer, or SCT, and Serial General Purpose I/O, or SGPIO. These peripherals reduce external component requirements and expand design flexibility for industrial, communications, and human-machine-interface equipment. The two high-speed USB controllers, Ethernet connectivity, LCD interface, and extensive GPIO support allow the LPC4317JBD144E to consolidate several functions into one controller. The Cortex-M4/M0 architecture can divide work between a performance-oriented core and a lower-overhead coprocessor, although final task allocation remains an application-specific firmware decision. The 144-pin LQFP exposes substantially more I/O than smaller MCU packages and supports mixed signal, communications, and display-adjacent designs. Typical applications include industrial Ethernet controllers, USB-to-serial or USB peripheral equipment, HMI panels, data acquisition units, and connected embedded products. Ethernet is suitable for networked control and monitoring, while the LCD and GPIO resources support local operator interfaces. The SPIFI interface is useful when an application requires nonvolatile storage beyond the internal flash or external memories with flexible serial interfaces. Designers should review the pin multiplexing, power requirements, decoupling recommendations, and peripheral instance assignments in the manufacturer datasheet before committing the PCB. Because the LQFP-144 package exposes 144 leads, adequate escape routing and careful assignment of high-speed communication pins are important. Firmware should also use the documented startup, clock, and memory-access sequences to ensure deterministic operation. This product overview organizes the key connectivity, memory, package, and application information needed for initial design selection. It also highlights practical pin, firmware, and layout checks that help distinguish the LPC4317JBD144E from other dual-core microcontrollers before a full schematic and firmware review.

RFQ İletişim
LPC4317JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP
LPC4317JET100E

LPC4317JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP

NXP Semiconductors LPC4317JET100E is a dual-core Arm Cortex-M4 and Cortex-M0 microcontroller operating up to 204 MHz, with 1 MB of embedded flash and 136 kB of SRAM in a 100-ball TFBGA package measuring 9 mm by 9 mm. It also includes 16 kB of EEPROM and integrates Ethernet, two high-speed USB controllers, LCD, external memory controller, and quad SPI Flash Interface resources. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC4317JET100E belongs to the microcontroller hierarchy: dual-core Arm processor, embedded controller, embedded processing, and semiconductor. Its Cortex-M4 core supports demanding real-time control tasks, while the Cortex-M0 coprocessor can execute supporting tasks or offload work from the primary core. The principal features include 204 MHz operation, 1 MB flash, 136 kB SRAM, and 16 kB EEPROM. Two high-speed USB controllers suit data-transfer, host, and device designs, while integrated Ethernet supports connected industrial equipment. The LCD interface and external memory controller broaden display and expansion options, and the quad SPI Flash Interface, or SPIFI, provides access to external serial flash for additional code or data storage. The split-core architecture provides an efficient way to partition embedded workloads. The Cortex-M4 core can handle control loops, protocol processing, and application logic, while the Cortex-M0 coprocessor can service background activity. This arrangement can improve real-time responsiveness when firmware is divided by workload rather than running every routine on the same core. The 100-TFBGA package also supports dense PCB layouts but requires careful escape routing and exposed-pad thermal design. Typical uses include industrial Ethernet controllers, USB-to-Ethernet equipment, data acquisition systems, LCD-equipped human-machine interfaces, and embedded gateways. The integrated connectivity peripherals reduce the need for external controllers in designs requiring Ethernet or high-speed USB. SPIFI expansion is useful when the internal 1 MB flash is insufficient for logs, assets, firmware images, or boot resources. Designers should confirm power, decoupling, clock, Ethernet, USB, and differential-signal routing directly against the NXP datasheet and reference schematics. The 9 mm square TFBGA requires via-in-pad or otherwise validated escape-routing methods, and the Ethernet and USB interfaces need controlled-impedance layouts. Firmware must also initialize both cores and coordinate shared peripheral access correctly. This product page consolidates the verified device characteristics, sourcing path, drop-in assessment, and application guidance needed for an initial design review. It supports engineers comparing the LPC4317JET100E for industrial networking, USB connectivity, and real-time embedded control while keeping footprint, memory, and peripheral requirements visible.

RFQ İletişim
LPC4320FET100 - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP
LPC4320FET100

LPC4320FET100 - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP

NXP Semiconductors LPC4320FET100 is a 32-bit dual-core Arm Cortex-M4/M0 flashless microcontroller with up to 204 MHz processing performance, 200 kB SRAM, and a 100-ball TFBGA package. It integrates Ethernet, two high-speed USB interfaces, CAN, AES, and SPIFI for signal-processing and connected embedded designs. The verified distributor listing identifies a 2.2 V to 3.6 V supply range and a 49-port I/O configuration. An Arm Cortex-M microcontroller is a reduced-instruction-set processor designed for embedded control, where deterministic peripheral access, low power, and compact software support are important. The LPC4320FET100 adds a Cortex-M0 coprocessor to the primary Cortex-M4 core, allowing control tasks and signal-processing workloads to be partitioned across two processing domains. Its architecture belongs to the microcontroller hierarchy: Arm Cortex-M core, embedded processor, microcontroller, and semiconductor. The main Cortex-M4 core is associated with a maximum 204 MHz clock in the verified distributor data. The dual-core arrangement can improve workload separation, while 200 kB of on-chip SRAM supports buffering and real-time data movement without relying entirely on external memory. Two high-speed USB interfaces, Ethernet, CAN, AES, and SPIFI provide communication and security functions within one device. The listed features make the MCU suitable for connected industrial, communications, audio, and data-acquisition equipment. The LPC4320FET100 is flashless according to the NXP product-page snippet, so application firmware and boot code require an external memory solution. The TFBGA-100 package has a 9 mm by 9 mm footprint and is intended for compact embedded assemblies. Because the package is a fine-pitch BGA, PCB layout requires careful escape routing, via placement, and assembly-process control. Typical applications include USB-connected test equipment, industrial data acquisition, CAN network nodes, Ethernet gateways, and audio or communications systems. The Cortex-M4 core can process time-sensitive data while the Cortex-M0 coprocessor handles supervisory or low-level tasks. Designers should confirm pin multiplexing, power sequencing, memory-interface requirements, and thermal performance against the complete NXP datasheet before layout release. For signal-processing designs, prioritize deterministic memory placement, stable clocking, and correct decoupling around the supply pins. For USB or Ethernet implementations, route high-speed signals as controlled-impedance nets and keep noisy switching paths away from sensitive analog sections. This page consolidates verified product information, commercial availability, and practical integration guidance; unspecified electrical details remain marked for datasheet confirmation.

RFQ İletişim
LPC4322JBD144E - Dual-Core 204MHz Cortex-M4/M0 MCU | NXP
LPC4322JBD144E

LPC4322JBD144E - Dual-Core 204MHz Cortex-M4/M0 MCU | NXP

The NXP Semiconductors LPC4322JBD144E is a dual-core Arm Cortex-M4/M0 microcontroller rated at 204 MHz, with 512 KB of flash memory and 136 KB of on-chip SRAM in a 144-pin LQFP package measuring 20 mm by 20 mm. The device also integrates two high-speed USB interfaces, LCD support, Ethernet capability, 16 KB of EEPROM, SPIFI flash storage, and configurable peripherals for embedded applications. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one package. The LPC4322JBD144E belongs to the Arm Cortex-M family of 32-bit embedded processors and combines a Cortex-M4 application core with a Cortex-M0 coprocessor. The Cortex-M0 core provides code- and tool-compatible support for energy-efficient peripheral tasks, while the Cortex-M4 core handles more demanding control and signal-processing workloads. The principal device features are a 204 MHz operating rate, 512 KB of program flash, 136 KB of SRAM, and a 16 KB EEPROM. Two high-speed USB interfaces support connected peripherals and USB communications, while Ethernet and LCD connectivity broaden the range of suitable embedded equipment. The SPIFI interface allows external flash storage to be connected when the internal program memory is insufficient. Configurable resources include the State Configurable Timer and Serial General Purpose I/O interface. The heterogeneous dual-core architecture can divide work between a general-purpose Cortex-M4 core and a simpler Cortex-M0 coprocessor without requiring a second discrete microcontroller. The NXP product page describes the coprocessor as an energy-efficient, easy-to-use 32-bit core with a simple instruction set and reduced code size. This architecture is useful when deterministic peripheral handling can run independently from the primary application workload. Typical applications include industrial control systems, USB-connected embedded products, human-machine interfaces, network equipment, data-acquisition equipment, and motor-control platforms. The large 144-pin package exposes substantially more I/O than smaller microcontroller packages, making it suitable for designs that need numerous external interfaces, LCD connections, communication peripherals, and mixed signal or control functions. PCB implementation should preserve the pin assignments and exposed connections defined by the manufacturer datasheet. Because the LQFP-144 package has fine lead spacing and many external interfaces, careful decoupling, controlled return paths, and signal-integrity review are important. A common design practice is to place low-ESR bypass capacitors adjacent to each supply pin and reserve the package thermal and copper area for the device's thermal requirements. This product page consolidates the key MCU specifications, package details, sourcing path, application guidance, and technically relevant substitution information. It also highlights the architectural benefit of integrating an Arm Cortex-M4 core, an Arm Cortex-M0 coprocessor, USB, Ethernet connectivity, LCD support, and flexible embedded peripherals into one 204 MHz microcontroller package.

RFQ İletişim
LPC4322JET100E - 204MHz Dual-Core MCU | NXP Semiconductors
LPC4322JET100E

LPC4322JET100E - 204MHz Dual-Core MCU | NXP Semiconductors

NXP Semiconductors LPC4322JET100E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller rated at 204 MHz, with 512 kB of embedded flash and 136 kB of on-chip SRAM in a 100-pin TFBGA package measuring 9 x 9 mm. The Cortex-M4 main core handles performance-sensitive embedded processing, while the energy-efficient Cortex-M0 coprocessor can support control tasks, communications, or low-power workloads. A 3.3 V supply, dual high-speed USB capability, Ethernet connectivity, LCD support, and extensive programmable peripherals position the device for connected industrial, communications, medical, and consumer equipment. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The LPC43xx hierarchy combines a higher-performance Cortex-M4 processor with a Cortex-M0 coprocessor inside a single package. This architecture can reduce the need for a separate microcontroller while allowing software to partition control and communication workloads across two instruction-set-compatible Arm cores. The LPC4322JET100E combines 512 kB of flash with 136 kB of SRAM and includes 16 kB of EEPROM within the broader LPC4322 family, which supports configurations up to 1 MB of flash. Its quad SPI Flash Interface, or SPIFI, provides an external serial-memory path, while the State Configurable Timer and Serial General Purpose I/O interfaces support event timing and flexible signal routing. Two high-speed USB interfaces and Ethernet support enable direct connectivity without requiring separate host controllers for common designs. Operated from a 3.3 V supply, the device is based on 32-bit Arm Cortex-M4 and Cortex-M0 cores. The M4 core provides the principal application-processing path, while the M0 core offers a simplified, code-efficient execution environment. The available manufacturer descriptions identify 204 MHz performance, making the part suitable for protocol processing, human-interface control, data acquisition, and embedded networking when combined with suitable external memories and analog circuitry. Typical uses include USB-connected industrial controllers, Ethernet-capable data-acquisition equipment, medical monitoring terminals, LCD-equipped human-interface panels, and communications equipment. The Ethernet and dual-USB resources make the MCU especially useful where several wired interfaces must coexist. Designers must also provide adequate flash, SRAM, clock, decoupling, and peripheral support required by the selected design, while paying attention to high-speed routing and thermal limits of the compact BGA package. For reliable PCB implementation, follow NXP's recommended power, decoupling, clock, and high-speed layout guidance. Place bypass capacitors close to supply pins, keep sensitive and high-speed traces short, and verify differential-pair routing for USB and Ethernet. This page consolidates verified manufacturer and distributor information with application guidance, comparison criteria, and drop-in replacement considerations for faster engineering evaluation.

RFQ İletişim
LPC4323JBD144E - Dual-Core Cortex-M4/M0 MCU | NXP
LPC4323JBD144E

LPC4323JBD144E - Dual-Core Cortex-M4/M0 MCU | NXP

The NXP Semiconductors LPC4323JBD144E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller with 512 kB of flash, 136 kB of SRAM, and an LQFP-144 package. The primary Cortex-M4 core provides high-performance embedded processing, while the Cortex-M0 coprocessor offers code- and tool-compatible execution for energy-efficient control tasks. The device also integrates Ethernet, two high-speed USB interfaces, LCD support, EMC-oriented features, and extensive configurable peripherals for connected embedded systems. A microcontroller is a programmable semiconductor platform that combines a processor core, memory, communication peripherals, timers, and I/O in one integrated circuit. The LPC4323JBD144E belongs to the Arm Cortex-M4 microcontroller family and sits within the broader embedded-processing and power-management hierarchy. Its two-core architecture can divide control, communications, and real-time work between Cortex-M4 and Cortex-M0 domains while retaining a unified software-development environment. The LPC4323 part family supports Arm Cortex-M4 processing with an Arm Cortex-M0 coprocessor capable of operation up to 204 MHz. The supplied product information identifies 512 kB flash and 136 kB SRAM for LPC4323JBD144, two high-speed USB ports, Ethernet connectivity, and LCD support. A quad SPI Flash Interface, State Configurable Timer, Serial General Purpose I/O interface, and EEPROM memory are also identified as family-level features. The LQFP-144 package provides 144 external leads and supports access to the device's extensive communications and general-purpose I/O resources. Because the target is a pin-intensive mixed-signal microcontroller rather than a simple power component, careful assignment of pins is necessary when designing PCB fanout, USB, Ethernet, display, and external-memory interfaces. The package is supplied in tray packaging according to the verified distributor listing. Typical uses include industrial Ethernet equipment, USB-to-serial or protocol-conversion controllers, human-machine interface controllers, connected test equipment, and embedded gateways. The Ethernet and dual high-speed USB resources make the device suitable for systems that must bridge multiple communication standards while using the Cortex-M0 core for background control or low-power peripheral servicing. The principal design consideration is firmware and board planning rather than a simple power-rail trade-off. Designers should reserve the required USB, Ethernet, LCD, clock, reset, debug, and programming pins before assigning general-purpose I/O. The exact pin names, multiplexing limits, clock requirements, decoupling values, and analog characteristics should be checked against the manufacturer datasheet before schematic capture. This page consolidates the verified manufacturer and distributor information for the LPC4323JBD144E, identifies same-family LQFP-144 alternatives, and separates confirmed specifications from parameters that still require datasheet verification. That distinction helps engineers compare procurement options without mistaking a family relationship for complete application-level equivalence.

RFQ İletişim
LPC4323JET100E - 204MHz Dual-Core MCU | NXP | TFBGA-100
LPC4323JET100E

LPC4323JET100E - 204MHz Dual-Core MCU | NXP | TFBGA-100

The NXP Semiconductors LPC4323JET100E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller operating at up to 204 MHz, with 512 KB of embedded flash and 136 KB of on-chip SRAM in a 100-pin thin-film BGA package measuring 9 mm by 9 mm. The E suffix identifies the specified device variant associated with the LPC4323JET100 product family. A microcontroller is a programmable system-on-chip containing processor cores, memory, and configurable peripherals. The LPC4323JET100E belongs to the LPC43xx family of embedded microcontrollers, combining an Arm Cortex-M4 application processor with an Arm Cortex-M0 coprocessor. This architecture supports deterministic control tasks alongside higher-level embedded processing while keeping the implementation within a unified 100-pin package. Key features include 512 KB of flash, 136 KB of SRAM, 16 KB of EEPROM, and two high-speed USB interfaces. The device also includes an LCD interface, Ethernet MAC, quad SPI Flash Interface, State Configurable Timer, and Serial General Purpose I/O interface. Its 3.3 V operating supply and 204 MHz maximum clock make it appropriate for connected embedded systems requiring substantial local memory and a broad peripheral set. The Cortex-M4 core handles application processing, while the Cortex-M0 core can execute independent control or communication tasks. The high-speed USB ports support USB-connected data acquisition, configuration, or communications equipment. Ethernet connectivity, LCD support, and the SPIFI interface broaden the device beyond a basic control MCU, enabling consolidation of multiple functions on one board. Typical applications include industrial data-acquisition equipment, USB-to-serial interface systems, test and measurement instruments, human-machine interfaces, networked embedded controllers, and connected industrial equipment. The LPC4323JET100E is particularly useful where local SRAM, dual processing capability, high-speed USB, and LCD connectivity must coexist in one compact controller. Designers should use the manufacturer pin-description table and package drawing when assigning PCB routes, power connections, decoupling, and exposed-pad thermal provisions. USB and Ethernet interfaces also require careful controlled-impedance routing, return-path continuity, and isolation from noisy external circuits. Firmware should validate clock, USB, Ethernet, and peripheral initialization before enabling production operation. This product page combines the manufacturer's device characteristics with engineering-focused application guidance, interface considerations, and a same-package replacement comparison. It helps designers evaluate the LPC4323JET100E against related LPC43xx devices while preserving the 100-pin TFBGA layout and the 204 MHz dual-core architecture.

RFQ İletişim
LPC4325JBD144E - Dual-Core Cortex-M4/M0 204MHz MCU | NXP
LPC4325JBD144E

LPC4325JBD144E - Dual-Core Cortex-M4/M0 204MHz MCU | NXP

The NXP Semiconductors LPC4325JBD144E is a 32-bit dual-core ARM Cortex-M4/Cortex-M0 microcontroller running at up to 204 MHz, with 768 kB on-chip flash, 136 kB SRAM, and 16 kB EEPROM, housed in a 144-pin LQFP (20x20 mm) surface-mount package. A dual-core microcontroller combines a high-performance application processor with a smaller co-processor on one die. In the LPC43xx family, the Cortex-M4 handles the main application workload while the Cortex-M0 offloads real-time tasks such as motor control, communication stack management, or peripheral servicing. This asymmetric multiprocessing architecture sits within the broader hierarchy of embedded processors: microcontroller unit (MCU) -> 32-bit MCU -> ARM Cortex-M based MCU -> asymmetric dual-core MCU. Key differentiating features include two High-Speed USB 2.0 controllers (host/device/OTG), an LCD controller, an external memory controller (EMC) for SDRAM/SRAM/NOR flash, a Quad SPI Flash Interface (SPIFI), Ethernet MAC, a State Configurable Timer (SCT), and a Serial General Purpose I/O (SGPIO) interface. The 204 MHz M4 core with FPU delivers DSP-grade throughput for compute-intensive embedded applications. Technically, the LPC4325 integrates a multi-layer AHB matrix that lets the M4, M0, and DMA masters access flash, SRAM, and peripherals concurrently, minimizing bus contention. The 16 kB true EEPROM supports byte-level erase/write, unlike flash-emulated EEPROM used by many competitors. Boot options include SPIFI, USB, and UART, easing field programming. Typical applications include industrial HMI panels (leveraging the LCD controller), gateway and bridge nodes (dual HS USB plus Ethernet), and motor-drive or test-equipment control boards needing real-time co-processing on the Cortex-M0. Design consideration: at 204 MHz, the EMC-driven SDRAM interface requires careful trace length matching and termination per the NXP hardware design guidelines. This page synthesizes distributor pricing, drop-in family alternatives, application guidance, and lifecycle data not consolidated in the manufacturer datasheet.

RFQ İletişim
LPC4325JET100E - 204MHz Cortex-M4/M0 MCU | NXP
LPC4325JET100E

LPC4325JET100E - 204MHz Cortex-M4/M0 MCU | NXP

The NXP Semiconductors LPC4325JET100E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller with a 204 MHz Cortex-M4 main processor, 768 KB of embedded flash, 136 KB of on-chip SRAM, and 16 KB of EEPROM in a 100-ball TFBGA package measuring 9 mm by 9 mm. It also includes two high-speed USB interfaces, Ethernet, LCD, and electromagnetic-compatibility features for connected embedded systems. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. In the product hierarchy, this MCU belongs to the Arm Cortex-M4 microcontroller family and uses an Arm Cortex-M0 coprocessor for parallel or peripheral-related processing. The LPC43x architecture therefore combines general-purpose real-time control with a dedicated secondary core while keeping both processors inside a single package. The principal feature set includes 768 KB of flash for firmware, 136 KB of SRAM for working data, 16 KB of EEPROM for nonvolatile parameters, and a quad SPI Flash Interface, or SPIFI. Advanced configurable peripherals include the State Configurable Timer and Serial General Purpose I/O interface. Two high-speed USB interfaces support connected-control and peripheral applications, while Ethernet and LCD support broaden the device beyond a basic embedded controller. The LPC4325JET100E operates from a 3.3 V supply according to distributor product data and reaches a listed 204 MHz core frequency. Its dual-core architecture can divide interrupt handling, communications, signal processing, or control tasks between the Cortex-M4 and Cortex-M0 processors. The 32-bit Arm instruction set and substantial on-chip memory reduce the need for external memory in connected industrial, communications, and consumer-control designs. Typical applications include Ethernet-connected industrial controllers, USB peripheral and host equipment, human-machine-interface systems with LCD support, high-speed data acquisition, and embedded gateways. The two high-speed USB ports and Ethernet capability make the device useful when a design must combine real-time control with multiple external communication paths. PCB design should follow NXP's package, ball-grid, decoupling, and high-speed-layout guidance. Validate the 3.3 V supply tolerance, external-memory requirements, USB impedance, Ethernet magnetics, and LCD interface routing against the manufacturer datasheet before layout release. Pay particular attention to power sequencing and exposed-pad or thermal requirements associated with the TFBGA assembly. This page combines verified manufacturer and distributor information with package-specific design guidance, same-family drop-in candidates, application analysis, and procurement details. It separates confirmed specifications from values that still require confirmation from the manufacturer datasheet, helping engineers plan the LPC4325JET100E without treating unverified assumptions as design data.

RFQ İletişim